Contents

Introduction

Background Information

Manage Roaming Client for Windows

Manage System Service via Services MMC Snap-in

Manage AnyConnect and Cisco Secure Client Roaming Module

Manage Roaming Client via Command Line

Standalone Client

AnyConnect Client

Cisco Secure Client

Manage Roaming Client for OS X

Stop Roaming Client

Start Roaming Client

AnyConnect Umbrella Module

Stop AnyConnect client

Start AnyConnect client

Cisco Secure Client

Stop Cisco Secure Client

Start Cisco Secure Client

Introduction

This document describes procedures for managing the Umbrella Roaming Client, including disabling and restarting the client.

Background Information

The Umbrella roaming client detects changes in computer network configurations. Therefore, users do not need to stop or restart the Umbrella Roaming Client regularly. To perform testing or to temporarily disable the Umbrella roaming client due to unexpected behavior, users can disable or restart it by completing the actions in this article. Users must open a support case if they experience unexpected behavior, conflicts, or have suggestions for behavioral improvement.

Manage Roaming Client for Windows

Manage System Service via Services MMC Snap-in

To stop, restart, or start the system service, open the Services MMC snap-in.

1. Navigate to Start > Run, then enter Services.msc .

2. Select the Umbrella Roaming Client service. Then, select the desired action.

Manage AnyConnect and Cisco Secure Client Roaming Module

The process is identical to the procedure for the standalone client.

1. Navigate to Start > Run, then enter Services.msc.

2. Select the Cisco AnyConnect Umbrella Roaming Secure Agent for AnyConnect, or Cisco Secure Client - Umbrella Agent for Secure Client. Then, select the desired action.

Manage Roaming Client via Command Line

To manage the roaming client from the command line, use these commands:

Standalone Client

- To stop the service, run:net stop Umbrella_RC

- To start the service, run:net start Umbrella_RC

AnyConnect Client

- To stop the service, run:net stop acumbrellaagent

- To start the service, run:net start acumbrellaagent

Cisco Secure Client

- To stop the service, run:net stop csc_umbrellaagent

- To start the service, run:net start csc_umbrellaagent

Manage Roaming Client for OS X

Users can add an option to the Menu Bar Icon in the OS X version of the Umbrella Roaming Client. This option allows users to easily disable or enable the Umbrella Roaming Client. Refer to the article "Umbrella Roaming Client for OS X: Adding an Enable/Disable option to the Menu Bar Icon" for instructions.

Note: The Menu Bar icon displays even when the Umbrella roaming client is stopped. The icon operates as a separate service.

Users can also control the client by running commands in the Terminal application:

Stop Roaming Client

sudo launchctl unload /Library/LaunchDaemons/com.opendns.osx.RoamingClientConfigUpdater.plist

Start Roaming Client

sudo launchctl load /Library/LaunchDaemons/com.opendns.osx.RoamingClientConfigUpdater.plist

AnyConnect Umbrella Module

Stop AnyConnect client

sudo launchctl unload /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist

Start AnyConnect client

sudo launchctl load /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist

Cisco Secure Client

Stop Cisco Secure Client

- Version 5.0.00529

sudo launchctl unload /Library/LaunchDaemons/com.cisco.secureclient.csc_vpnagentd.plist

- Version 5.0.01242

sudo launchctl unload /Library/LaunchDaemons/com.cisco.secureclient.vpnagentd.plist

- MacOS 13+ Version 5.1.X.XXX and later

osascript -e 'quit app "Cisco Secure Client - AnyConnect VPN Service.app"'

sudo "/opt/cisco/secureclient/bin/Cisco Secure Client - AnyConnect VPN Service.app/Contents/MacOS/Cisco Secure Client - AnyConnect VPN Service" uninstall

Start Cisco Secure Client

- Version 5.0.00529

sudo launchctl load /Library/LaunchDaemons/com.cisco.secureclient.csc_vpnagentd.plist

- Version 5.0.01242

sudo launchctl load /Library/LaunchDaemons/com.cisco.secureclient.vpnagentd.plist

- MacOS 13+ Version 5.1.X.XXX and later

open -a "/opt/cisco/secureclient/bin/Cisco Secure Client - AnyConnect VPN Service.app"