Contents

Introduction

Prerequisites

Requirements

Components Used

Background Information

Configure

For ESA

Add the user role

Assign the user role to a user

For SMA

Add the user role

Assign the user role to a user

Introduction

This document describes the configuration for AMP user privileges for Cisco Secure Email and Cisco Secure Email and Web Manager

Prerequisites

Requirements

Cisco recommends knowledge of these topics:

- Cisco Secure Email (aka ESA)

- Cisco Secure Email and Cisco Secure Email and Web Manager (aka SMA)

Components Used

The information in this document is based on these software and hardware versions:

- Email Security Appliance version 14.3

- Cloud email Security version 14.3

- AMP feature key

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

Background Information

This feature provides you a role for AMP configurations privileges. When this privilege is assigned to a user, the user get to configure AMP security settings only.

To view AMP-relevant reports, users can use this AMP configuration privilege to view both AMP configurations and AMP Reports. AMP Reports access is given to the 4 reports:

- Advanced Malware Protection

- AMP File Analysis

- AMP Verdict Chart Updates

- Mailbox Auto Remediation reports. (Applicable to both legacy and NGUI)

Configure

For ESA

Add the user role

You first need to create a new user role on the ESA:

1. Go to System Administration > User Roles

2. Click on “Add User Role”

3. Name the User Role

4. Select “Full Access” in AMP Configuration

5. Select “View relevant reports” in Email Reporting

6. Submit and commit

Assign the user role to a user

Next, you need to create a new user to assign the user role created in the previous section:

1. Go to System Administration > Users

2. Click on “Add User”

3. Name the user

4. Click on “Custom Roles” and select the User Role created previously

5. Submit and commit changes

For SMA

Add the user role

You first need to create a new user role on the SMA:

1. Go to System Administration > User Roles

2. Click on “Add User Role”

3. Name the User Role

4. Select by group or all Email appliances at your convenience “AMP reports”

5. Submit and commit

Assign the user role to a user

Next, you need to create a new user to assign the user role created in the previous section

1. Go to System Administration > Users

2. Click on “Add User”

3. Name the user

4. Click on “Custom Roles” and select the User Role created previously

5. Submit and commit changes