Contents

Introduction

Background Information

Problem

Solution

Identify the poor SBRS mail server

Allow the poor SBRS mail server through the ESA

Related Information

Introduction

This article describes how to identify and temporarily allow mail servers with poor SenderBase Reputation Score (SBRS) through the Email Security Appliance (ESA).

Background Information

Sender reputation filtering is the first layer of spam protection, allowing you to control the messages that come through the email gateway based on sender's trustworthiness as determined by SBRS.  Email servers with poor SBRS can have their connections rejected, or their messages bounced, based on your preferences.

Problem

A mail server connects to the ESA and is reported as poor SBRS and emails are delayed due to a 554 SMTP response received by the connecting server.

Sample 554 Response:

-----Original Message-----

From: Mail Delivery System [mailto:Mailer-Daemon@example.domain.com]

Sent: 25 April 2013 23:23

To: user@companyx.com

Subject: Mail delivery failed: returning message to sender

This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its

recipients. This is a permanent error. The following address(es) failed:

person@example.domain.com

SMTP error from remote mail server after initial connection:

host gatekeeper.companyx.com [195.195.195.1]: 554-gatekeeper1.companyx.com

554 Your access to this mail system has been rejected due to the sending

MTA's poor reputation. If you believe that this failure is in error, please

contact the intended recipient via alternate means.

Solution

Identify the poor SBRS mail server

Use the Command Line Interface (CLI) as the Graphical User Interface's (GUI) message tracking does not record rejected connections by default.

Note:  Tracking of Rejected connections can be enabled at GUI > Security Services > Message Tracking > Enable "Rejected Connection Handling"

Use grep against the domain in order to pull all related logging data against that domain.  For this output, the example domain used is test.com:

myesa.local> grep "test.com" mail_logs

Info: New ICID 1512 to Management (10.0.0.1) from 198.51.100.1 connecting host reverse DNS hostname: smtp1.

test.com

Info: MID 6531

ICID 1512 From: test@test.com

Then grep the Incoming Connection ID (ICID) to extract the mail host information.  The ICID is logging is used in order to reveal all information such as: sending host IP address, the DNS verified hostname (if available), sendergroup matching and the associated SBRS score:

myesa.local> grep "ICID 1512" mail_logs

Tue Mar 10 12:04:29 2015 Info: New SMTP ICID 1512 interface Management (10.0.0.1) address 198.51.100.1 reverse dns host unknown verified smtp1.test.com

Tue Mar 10 12:04:29 2015 Info: ICID 1512 REJECT SG BLACKLIST match sbrs[-10:-3] SBRS -4.0

Allow the poor SBRS mail server through the ESA

1. From the GUI, navigate to Mail Policies > HAT overview.

2. Click Add Sender Group...

3. Name the Sender Group with a meaningful name.

4. Select the Order so that it will be above the BLACKLIST Sender Group.

5. Select either mail policy, ACCEPTED or THROTTLED.

6. Leave all other fields empty.

7. Click Submit and Add Senders

8. Add either the IP address or DNS hostname of the affected host(s) as located from the grep command.

9. Click Submit

10. Review the HAT overview and ensure that the new Sender Group is ordered correctly.

11. Finally, click Commit to save all configuration changes.

For Sender address, the following formats are allowed:

- IPv6 addresses such as 2001:420:80:1::5

- IPv4 addresses such as 10.1.1.0

- IPv4 or IPv6 subnets such as 10.1.1.0/24, 2001:db8::/32

- IPv4 or IPv6 address ranges such as 10.1.1.10-20, 10.1.1-5, or 2001:db8::1-2001:db8::10

- Hostnames such as example.com

- Partial hostnames such as .example.com.

In the example as shown above, in order to allow any other mail server information ending with test.com, this would have been configured as:

198.51.100.1

smtp1.test.com

.test.com

Related Information

About Cisco SenderBase