Contents

Introduction

Procedure to Integrate AMP for Endpoints with FMC

Related Information

Introduction

This document describes the procedure to integrate Advanced Malware Protection (AMP) for Endpoints with Firepower Management Center (FMC) for event data feed.

Procedure to Integrate AMP for Endpoints with FMC

Note: This is a one-way data feed (AMP for Endpoints feeds the FMC with the events that it encounters).  Configuration will not be integrated.

1. From the FMC, Click "AMP":

2. Click on "AMP Management"

3. "Add AMP Cloud Connection"

4. Select the AMP Cloud that you use for AMP for Endpoints:

5. Click "Register":

6. Click "Yes" to allow redirection to the AMP for Endpoint console:

7. Log in to AMP for Endpoints:

8. Click "Allow" to authorize the AMP to FMC Connection:

9. The page is redirected back to the FMC. Verify the Cisco AMP Solution Type, it will display "AMP for Endpoints and AMP for Networks" and the "State" should be a blue checkmark:

Related Information

- Technical Support & Documentation - Cisco Systems

- Cisco AMP for Endpoints - TechNotes

- Cisco AMP for Endpoints - User Guide