Contents

Introduction

Background Information

CA Authentication

Request

Response

Client Enrollment

Request

Response

Client Re-enrollment

Renewal

Rollover

Building Blocks

PKCS#7

Signed Envelope (SignedData)

Enveloped Data (EnvelopedData)

PKCS#10

Related Information

Appendix

SCEP Requests

Request Message Format

Schematic View

SCEP Responses

Response Message Format

Content Types

The pkiMessage Structure

SCEP OIDs

SCEP pkiMessage

SCEP messageType

SCEP pkiStatus

Introduction

This document describes the Simple Certificate Enrollment Protocol (SCEP), which is a protocol used for enrollment and other Public Key Infrastructure (PKI) operations.

Background Information

SCEP was originally developed by Cisco, and is documented in an Internet Engineering Task Force (IETF) Draft.

Its main characteristics are:

- Request/response model based on HTTP (GET method; optional support for POST method)

- Only supports RSA-based cryptography

- Uses PKCS#10 as the certificate request format

- Uses PKCS#7 in order to convey cryptographically signed/encrypted messages

- Supports asynchronous granting by the server, with regular polling by the requester

- Has limited Certificate Revocation List (CRL) retrieval support (the preferred method is through a CRL Distribution Point (CDP) query, for scalability reasons)

- Does not support online certificate revocation (must be done offline through other means)

- Requires the use of a challenge password field within the Certificate Signing Request (CSR), which must be shared only between the server and the requester

Enrollment and usage of SCEP generally follows this work flow:

1. Obtain a copy of the Certificate Authority (CA) certificate and validate it.

2. Generate a CSR and send it securely to the CA.

3. Poll the SCEP server in order to check whether the certificate was signed.

4. Re-enroll as necessary in order to obtain a new certificate prior to the expiration of the current certificate.

5. Retrieve the CRL as necessary.

CA Authentication

SCEP uses the CA certificate in order to secure the message exchange for the CSR. As a result, it is necessary to obtain a copy of the CA certificate. The GetCACert operation is used.

Request

The request is sent as a HTTP GET request. A packet capture for the request looks similar to this:

GET /cgi-bin/pkiclient.exe?operation=GetCACert

Response

The response is simply the binary-encoded CA certificate (X.509). The client needs to validate that the CA certificate is trusted through an examination of the fingerprint/hash. This has to be done via an out-of-band method (a phone call to a system administrator or pre-configuration of the fingerprint within the trustpoint).

Client Enrollment

Request

The enrollment request is sent as a HTTP GET request. A packet capture for the request looks similar to this:

/cgi-bin/pkiclient.exe?operation=PKIOperation&message=

MIIHCgYJKoZIhvcNAQcCoIIG%2BzCCBvcCAQExDjA......<snip>

1. The text after the "message=" is a URL Encoded String, which is extracted from the GET request string.

2. The text is then URL Decoded into an ASCII text string. That text string is a Base64-encoded SignedData PKCS#7.

3. The SignedData PKCS#7 is signed by the client with one of these certificates; it is used to prove that the client sent it and that it has not been altered in transit:

- A self-signed certificate (used upon initial enrollment)

- A Manufacturer Installed Certificate (MIC)

- A current certification that expires soon (re-enrollment)

4. The "Signed Data" portion of the SignedData PKCS#7 is an EnvelopedData PKCS#7.

5. The EnvelopedData PKCS#7 is a container that contains "Encrypted Data" and the "decryption key." The Decryption Key is encrypted with the recipient's Public Key. In this specific case, the recipient is the CA; as a result. Only the CA can actually decrypt the "Encrypted Data."

6. The "Encrypted Data" portion of the Enveloped PKCS#7 is the CSR (PKCS#10).

Response

The response to the SCEP enrollment request is one of three types:

- Reject - The request is rejected by the administrator for any number of reasons, such as:

- Invalid key size

- Invalid challenge password

- The CA could not validate the request

- The request asked for attributes that the CA did not authorize

- The request was signed by an identity that the CA does not trust

- Pending - The CA administrator has not reviewed the request yet.

- Success - The request is accepted and the signed certificate is included. The signed certificate is held within a special type of PKCS#7 called a "Degenerate Certificates-Only PKCS#7," which is a special container that can hold one or more X.509 or CRLs, but does not contain a signed or encrypted data payload.

Client Re-enrollment

Prior to certificate expiration, the client needs to get a new certificate. There is a slight behavioral difference between renewal and rollover. Renewal happens when the ID certificate of the client approaches expiration, and its expiration date is not the same (earlier than) as the expiration date of the CA certificate. Rollover happens when the ID certificate approaches expiration, and its expiration date is the same as the CA's certificate expiration date.

Renewal

As the expiration date of an ID certificate approaches, a SCEP client might want to obtain a new certificate. The client generates a CSR and goes through the Enrollment process (as defined previously). The current certificate is used in order to sign the SignedData PKCS#7, which in turn proves identity to the CA. Upon reciept of the new certificate, the client immediately deletes the current certificate and replaces it with the new one, whose validity starts immediately.

Rollover

Rollover is a special case where the CA certificate expires and a new CA certificate is generated. The CA generates a new CA certificate which becomes valid once the current CA certificate expires. The CA usually generates this "Shadow CA" certificate some time prior to rollover time, because it is needed in order to generate "Shadow ID" certificates for the clients.

When the SCEP client's ID certificate approaches expiration, the SCEP client queries the CA for the "Shadow CA" Certificate. This is done with the GetNextCACert operation as shown here:

GET /cgi-bin/pkiclient.exe?operation=GetNextCACert

Once the SCEP client has the "Shadow CA" certificate, it requests a "Shadow ID" certificate after the normal enrollment procedure. The CA signs the "Shadow ID" certificate with the "Shadow CA" certificate. Unlike a normal renewal request, the "Shadow ID" certificate that is returned becomes valid at the time of CA certificate expiration (rollover). As a result, the client needs to keep a copy of the pre- and post-rollover certificates for both the CA and the ID certificate. At the time of CA expiration (rollover), the SCEP client deletes the current CA certificate and ID certificate and replaces them with the "Shadow" copies.

Building Blocks

This structure is used as the building blocks of SCEP.

Note: PKCS#7 and PKCS#10 are not SCEP-specific.

PKCS#7

PKCS#7 is a defined data format that allows data to be signed or encrypted. The data format includes the original data and the associated metadata necessary in order to perform the cryptographic operation.

Signed Envelope (SignedData)

The signed envelope is a format that carries data and confirms that the encapsulated data is not altered in transit via digital signatures. It includes this information:

SignedData &colon;:= SEQUENCE {

version CMSVersion,

digestAlgorithms DigestAlgorithmIdentifiers,

encapContentInfo EncapsulatedContentInfo,

certificates [0] IMPLICIT CertificateSet OPTIONAL,

crls [1] IMPLICIT RevocationInfoChoices OPTIONAL,

signerInfos SignerInfos }

- Version number - With SCEP, version 1 used.

- List of Digest Algorithms Used - With SCEP, there is only one Signer and thus only one Hashing Algorithm.

- Actual data that is signed - With SCEP, this is a PKCS#7 Enveloped-data format (Encrypted Envelope).

- List of certificates of the signers - With SCEP, this is a self-signed certificate on initial enrollment or the current certificate if you re-enroll.

- List of the signers and the fingerprint generated by each signer - With SCEP, there is only one signer.

The data encapsulated is not encrypted or obfuscated. This format simply provides protection against the message that is altered.

Enveloped Data (EnvelopedData)

The Enveloped Data format carries data that is encrypted and can only be decrypted by the specified recipient(s). It includes this information:

EnvelopedData &colon;:= SEQUENCE {

version CMSVersion,

originatorInfo [0] IMPLICIT OriginatorInfo OPTIONAL,

recipientInfos RecipientInfos,

encryptedContentInfo EncryptedContentInfo,

unprotectedAttrs [1] IMPLICIT UnprotectedAttributes OPTIONAL }

- Version number - With SCEP, version 0 is used.

- List of each of the recipients and the related encrypted data-encryption key - With SCEP, there is only one recipient (for requests: the CA server; for responses: the client).

- The encrypted data - This is encrypted with a randomly generated key (that has been encrypted with the recipient's public key).

PKCS#10

PKCS#10 describes the format of a CSR. A CSR contains the information that clients request be included within their certificates:

- Subject Name

- A copy of the public key

- A challenge password (optional)

- Any certificate extensions reqested, such as:

- Key Usage (KU)

- Extended Key Usage (EKU)

- Subject Alternative Name (SAN)

- Universal Principal Name (UPN)

- A fingerprint of the request

Here is an example of a CSR:

Certificate Request:

Data&colon;

Version: 0 (0x0)

Subject: CN=scepclient

Subject Public Key Info:

Public Key Algorithm: rsaEncryption                Public-Key: (1024 bit)

Modulus:

00:cd:46:5b:e2:13:f9:bf:14:11:25:6d:ff:2f:43:

64:75:89:77:f6:8a:98:46:97:13:ca:50:83:bb:10:

cf:73:a4:bc:c1:b0:4b:5c:8b:58:25:38:d1:19:00:

a2:35:73:ef:9e:30:72:27:02:b1:64:41:f8:f6:94:

7b:90:c4:04:28:a1:02:c2:20:a2:14:da:b6:42:6f:

e6:cb:bb:33:c4:a3:64:de:4b:3a:7d:4c:a0:d4:e1:

b8:d8:71:cc:c7:59:89:88:43:24:f1:a4:56:66:3f:

10:25:41:69:af:e0:e2:b8:c8:a4:22:89:55:e1:cb:

00:95:31:3f:af:51:3f:53:ad

Exponent: 65537 (0x10001)

Attributes:

challengePassword        :

Requested Extensions:

X509v3 Key Usage: critical

Digital Signature, Key Encipherment

X509v3 Subject Alternative Name:

DNS:webserver.example.com

Signature Algorithm: sha1WithRSAEncryption

8c:d6:4c:52:4e:c0:d0:28:ca:cf:dc:c1:67:93:aa:4a:93:d0:

d1:92:d9:66:d0:99:f5:ad:b4:79:a5:da:2d:6a:f0:39:63:8f:

e4:02:b9:bb:39:9d:a0:7a:6e:77:bf:d2:49:22:08:e2:dc:67:

ea:59:45:8f:77:45:60:62:67:64:1d:fe:c7:d6:a0:c3:06:85:

e8:f8:11:54:c5:94:9e:fd:42:69:be:e6:73:40:dc:11:a5:9a:

f5:18:a0:47:33:65:22:d3:45:9f:f0:fd:1d:f4:6f:38:75:c7:

a6:8b:3a:33:07:09:12:f3:f1:af:ba:b7:cf:a6:af:67:cf:47:         60:fc

Related Information

- SCEP IETF Draft

- Legacy SCEP using the CLI Configuration Guide

- Configuring SCEP Support for BYOD

Appendix

SCEP Requests

Request Message Format

Requests are sent with an HTTP GET of the form :

GET CGI-path/pkiclient.exe?operation=operation&message=message HTTP/version

Where:

- CGI-path is dependent on the server and points to the Common Gateway Interface (CGI) program that handles SCEP requests:

- Cisco IOS® CA uses an empty path string.

- Microsoft CA uses /certsrv/mscep/mscep.dll, which points to the MSCEP/ Network Device Enrollment Service (NDES) IIS service.

- Operation identifies the operation that is performed.

- Message carries additional data for that operation (and it can be empty if no actual data is required).

With the GET method, the message part is either plain text, or Distinguished Encoding Rules (DER)-encoded PKCS#7 converted to Base64. If the POST method is supported, content that would be sent in Base64 encoding with GET might be sent in binary format with POST instead.

Schematic View

Possible values for operations and their associated message values:

- operation = PKIOperation:

- messageis a SCEP pkiMessage structure, based on PKCS#7 and encoded with DER and Base64.

- the pkiMessage structure can be of these types:

- PKCSReq: PKCS#10 CSR

- GetCertInitial: polling for CSR granting status

- GetCert or GetCRL: certificate or CRL retrieval

- operation = GetCACert, GetNextCACert, or (optional) GetCACaps:

- message can be omitted, or can be set to a name that identifies the CA.

SCEP Responses

Response Message Format

SCEP responses are returned as standard HTTP content, with a Content-Type that depends on the original request and the type of data returned. DER content is returned as binary (not in Base64 as for the request). PKCS#7 content might or might not contain encrypted/signed enveloped data; if it does not (only contains a set of certificates), it is referred to as a degenerate PKCS#7.

Content Types

Possible values for Content-Type:

application/x-pki-message:

- in response to the PKIOperation operation, with pkiMessage of type: PKCSReq, GetCertInitial, GetCert or GetCRL

- response body is a pkiMessage of type: CertRep

application/x-x509-ca-cert:

- in response to the GetCACert operation

- response body is the DER-encoded X.509 CA certificate

application/x-x509-ca-ra-cert:

- in response to the GetCACert operation

- response body is a DER-encoded degenerate PKCS#7 that contains the CA and RA certificates

application/x-x509-next-ca-cert:

- in response to the GetNextCACert operation

- response body is a variation of a pkiMessage of type: CertRep

The pkiMessage Structure

SCEP OIDs

2.16.840.1.113733.1.9.2 scep-messageType

2.16.840.1.113733.1.9.3 scep-pkiStatus

2.16.840.1.113733.1.9.4 scep-failInfo

2.16.840.1.113733.1.9.5 scep-senderNonce

2.16.840.1.113733.1.9.6 scep-recipientNonce

2.16.840.1.113733.1.9.7 scep-transId

2.16.840.1.113733.1.9.8 scep-extensionReq

SCEP pkiMessage

- PKCS#7 SignedData

- PKCS#7 EnvelopedData (called pkcsPKIEnvelope; optional, encrypted to message recipient)

- messageData (CSR, cert, CRL, ...)

- SignerInfo with authenticatedAttributes:

- transactionID, messageType, senderNonce

- pkiStatus, recipientNonce (response only)

- failInfo (response + failure only)

SCEP messageType

- request:

- PKCSReq (19): PKCS#10 CSR

- GetCertInitial (20): certificate enrollment polling

- GetCert (21): certificate retrieval

- GetCRL (22): CRL retrieval

- response:

- CertRep (3): response to certificate or CRL request

SCEP pkiStatus

- SUCCESS (0): request granted (response in pkcsPKIEnvelope)

- FAILURE (2): request rejected (details in failInfo attribute)

- PENDING (3): request awaits manual approval