Contents

For External Customer / Partner Use Only: These instructions are provided to help customers / partners perform the following action themselves to resolve the issue. If the customer / partner runs into issues following the instructions, please have them open a case with licensing support (https://www.cisco.com/go/scm) To help resolve. Please DO NOT perform these actions yourself if you are an internal Cisco resource outside of the Licensing Support team.

Before You start, ensure you have the following:

- Active Cisco.com Account.

- RUM Report in .tar Format.

- Access to CLI of the Device

- Access to Smart Account and Virtual Account

If you are looking to view SLP device in CSSM portal for devices which are not connected to CSSM or to CSLU, execute the below steps.

Step 1: From device CLI execute license smart save usage command in privileged EXEC mode and save the file to boot flash. E.g.: Device# license smart save usage all file bootflash: all_rum.txt.

Step 2: Copy the file to TFTP location where it can be uploaded to CSSM. E.g.: Device# copy bootflash: all_rum.txt tftp://<IP address of TFTP server>/all_rum.txt.

Step 3: Log in to the CSSM and click Manage licenses. Log in using the username and password provided by Cisco. The Smart Software Licensing page is displayed.

Step 4: Select the Smart Account (upper left-hand corner of the screen) that will receive the report.

Step 5: Select Smart Software Licensing → Reports → Usage Data Files.

Step 6: Click Upload Usage Data. Browse to the file location to Upload a RUM report selects and click Upload Data.

Step 7: Select the virtual account from the dropdown selector under which the device needs to be reported and click on “Ok”.

Step Result: After the RUM report gets processed successfully, the device will be shown in the smart account.

You may have to wait for the file to appear in the Acknowledgement column. If there are many RUM reports or requests to process, CSSM may take a few minutes.

Troubleshooting:

If you experience an issue with this process, that you cannot address, open a case in Support Case Manager (SCM) using software licensing option.

For feedback on the content of this document, please submit here .