TelePresence Server Displays Endpoint Names in a Conference

Introduction

This document describes how to display the names of the different endpoints with the use of the Cisco TelePresence Server when you are in a conference.

Prerequisites

Requirements

Cisco recommends that you have knowledge of the Cisco TelePresence Server.

Components Used

The information in this document is based on the Cisco TelePresence Server.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Display the Endpoint Names

You can use a global setting in order to display the endpoint names. Complete these steps in order to activate this global setting:

1. Log into the Cisco TelePresence Server and navigate to Configuration > System settings.
   
   
2. Select Show endpoint names as panel labels and click Apply Changes.

Complete these steps in order to override this global setting for an individual endpoint:

1. Navigate to Endpoints and select the endpoint or endpoint group.
   
   
2. Click Configuration.
   
   
3. Select Show endpoint names as panel labels and click Update endpoint.