What size of compact flash card can I use in my TANDBERG Codian MCU or ISDN GW?

Available Languages

Updated:April 23, 2015
Document ID:112798

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to the Cisco TelePresence MCU 4203, Cisco TelePresence MCU MSE 8420, Cisco TelePresence ISDN GW 3241 and Cisco TelePresence ISDN GW MSE 8321 products.

Q. What size of compact flash card can I use in my TANDBERG Codian MCU or ISDN GW?

A. If your unit was shipped with a compact flash card already installed, that is the best one to use; this is the one that TANDBERG have tested. For units that did not come with a compact flash card installed, you can use a 256MB compact flash card.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco