Contents

Introduction

Prerequisites

Requirements

Components used

Configure

Add a Video Connection Between the Quad Camera and the Codec Pro

Add a 4K Screen for Content Sharing

Get and Install a Product Key

Verify

Troubleshoot

Introduction

This document describes how the Webex Room 70 Dual (70D) can be converted into Webex Room 70D Panorama Upgrade.

Prerequisites

Requirements

- Cisco Unified Communication Manager (CUCM) version 10.5.2, 11.5.1, 12.0.1, 12.5.1, and later.

- Device pack that includes the product types: Cisco Webex Room Panorama and Cisco Webex Room 70 Panorama.

- Webex room Panorama version CE9.13.1 and above. Recommended version: RoomOS 10.3.2.0.

Note: Device pack software can be downloaded in the next link: https://software.cisco.com/download/home/268439621.

Note: The latest Webex Panorama software can be downloaded in the next link: https://software.cisco.com/download/home/286325718/type/280886992/release/RoomOS%2010.3.2.0.

Components used

The information in this document is based on Webex Room 70D G2.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

Configure

Add a Video Connection Between the Quad Camera and the Codec Pro

Connect an High-Definition Multimedia Interface cable (HDMI) to HDMI with Part ID (PID) 72-101333-xx between HDMI port 2 in the Quad Camera and the HDMI port 2 in the Codec Pro, as shown in the next image:

Note: The HDMI cable must be 2m long at least. The PID numbers can be found in the next link: Spare Part List.

Note: For further reference on device connections, you can refer to the next document: Room 70 Panorama Installation Guide.

Add a 4K Screen for Content Sharing

Review the next available options:

Content screen above video system – 65” screen.

Content screen below video system – 55” screen.

Get and Install a Product Key

Once the Panorama Product is provided, you must get something like this: 1P018-1-xxxxxxxx.

Open the Webex Room 70 admin web interface.

Navigate to the Webex Room 70 > Software > Product Keys and install the provided product key.

Restart is required:

Once the endpoint is restarted, the endpoint must be a Webex Room 70 Panorama.

Verify

In order to verify the Webex Room 70D G2 is succesfully converted in a Room 70 Panorama access the Endpoint web admin:

You must see the new product name: Room 70 Panorama in the upper left corner, as shown in the image.

You can also navigate to Software > Product Keys, it must say The video system is a Cisco Webex Room 70 Panorama.

Troubleshoot

Additional HDMI cable not connected

Navigate to System Maintenance > Issues and Diagnostics > Issues > Active Issues.

In order to solve this issue, please install the HDMI cable between Quad Camera and Codec Pro, as shown in the next image:

Panorama view feature not started.

Navigate to System Maintenance > Issues and Diagnostics > Issues > Active Issues.

In order to solve this issue, follow the wizard found in the Touch 10/Room Navigator settings.

Fail to SIP register in CUCM.

Navigate to System Maintenance > Issues and Diagnostics > Issues > Active Issues.

In order to solve this issue, you must change the Product Type in the CUCM Phone Profile. Previously configured as Webex Room 70D G2, now the system must be configured as Cisco Webex Room70 Panorama.