This article relates to the Cisco TelePresence System Profile MXP Series, Cisco TelePresence System MXP Series, Cisco Telepresence System Integrator MXP Series and Cisco TelePresence System Edge MXP Series products.
Q. How do I reset the IP access password on a TANDBERG MXP endpoint?
A. The endpoint will by default have strict password enabled, which will require a password with at least 15 characters that contains 2 lower case, 2 upper case letters, 2 numbers, and 2 special characters (i.e. !@#$%^&*()_+).
Set the password from the menu:
Set the password using the API:
The password can also be set/reset from the serial port by connecting a straight through serial cable (9600, N,8,1) to data port 1, and enter the following command:xConfiguration SystemUnit Password:<password>
Disable the strict password: