This article relates to the Cisco TelePresence System Profile MXP Series, Cisco TelePresence System MXP Series, Cisco Telepresence System Integrator MXP Series and Cisco TelePresence System Edge MXP Series products.
Q. How do I change the layouts in a multi party call?
A. If you are using embedded multisite, you can change the layout of your call using the Services Menu, available from the Main Menu screen or the bottom of the remote control (in a TRC4). You can request the floor, which forces your endpoint to be seen by everyone else as either the main image or the larger image in a 5+1 layout. An indicator appears when you have the floor and disappears when you release the floor. The release floor option will make the floor available for other participants. To change the layout of the conference, select the A icon to select from the options available (4 split, 3 party dual screen, voice switched, or 5+1 split). Auto Split will be the default layout selected to choose the best layout depending on the number of people in the call.
If you are connected to a conference on a Codian MCU, enable 'Far end camera controls' on your endpoint, and use the arrow keys on your remote control to choose between the available layouts.