How do I use my TANDBERG MXP endpoint as my PC monitor?

Introduction

This article relates to the Cisco TelePresence System Profile MXP Series, Cisco TelePresence System MXP Series, Cisco Telepresence System Integrator MXP Series and Cisco TelePresence System Edge MXP Series products.

Q. How do I use my TANDBERG MXP endpoint as my PC monitor?

A. Using your endpoint as your PC monitor enables you to view your computer screen while on a video call without the risk that the other participants can see your computer screen.

1. Press the OK button (represented as a tick/check symbol on some endpoints) to wake up the system and display the Call Menu.

2. In the Call menu, use the arrow keys on the remote control or keypad (depending on your MXP model number) to navigate to the Control Panel icon. Press the OK button to display the Control Panel.

3. Use the arrow keys on the remote control/keypad to navigate to General. Press OK.

4. Navigate to Screen Settings. Press OK.

5. For Use Screen as Local PC Monitor, select On.

6. Navigate to Save. Press OK.

7. Connect your computer to the screen using the VGA (PC) cable supplied.

8. On the remote control/keypad, press Selfview. An indicator tells you that your computer is being displayed

Related Information

• Technical Support & Documentation - Cisco Systems