This article relates to the Cisco TelePresence System Codec C90, Cisco TelePresence System Codec C60 and Cisco TelePresence System Codec C40 products.
Q. I installed a second TANDBERG PrecisionHD 1080p Camera on my TANDBERG Codec, but I am unable to control it. Why?
A. This answer is valid for the following products:
TANDBERG Codec C40
TANDBERG Codec C60
TANDBERG Codec C90
To control the second camera you need to use a VISCA cascading cable. The VISCA cascading cable cable will be connected from the first camera to the second camera and can be sourced from TANDBERG.
You will need to configure the video input source to set which camera you should control, when this particular video input source is active:
Login to the codec as admin using SSH (Secure Shell).
To configure the second camera to be connected to video input source 2, run the following API command: xConfiguration Video Input Source 2 CameraControl CameraId: 2.