Explore Cisco
How to Buy

Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

How do I enable the Composite or S-Video input for my TANDBERG Codec?

Available Languages

Updated:April 23, 2015
Document ID:112609

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to the Cisco TelePresence System Codec C90 and Cisco TelePresence System Codec C60 products.

Q. How do I enable the Composite or S-Video input for my TANDBERG Codec?

A. The below information is only valid for systems running software versions lower than TC2.0.0.

This answer is valid for the following products:

TANDBERG Codec C60

TANDBERG Codec C90

Even though these signals will be detected by the system, the C90 currently doesn't support interlaced formats such as composite or S-Video. If you need to display these formats, you will need an external de-interlacer.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco