Tidal Enterprise Scheduler: Resolve the "TES_019002:Delete Node record with ID [###] failed" Error

Available Languages

Updated:August 1, 2011

Document ID:113156

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Prerequisites

Requirements

Components Used

Conventions

Problem

Solution

Related Information

Introduction

This document describes how to resolve the TES_019002:Delete Node record with ID [###] failed error message when attempting to delete an Agent/Adapter Connection.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on the Tidal Enterprise Scheduler versions 6.0.0, 6.0.1.170, and 6.0.1.178.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Identify the Workgroups in the Workgroup pane that have access to the Agent.
Click the check box in front of the Agent's name in order to remove the Workgroup's access to the Agent.

Note: This issue is documented in Cisco Bug ID CSCtr69079 (registered customers only) , and will be corrected in a future product release.