Addendum To EoS/EoL Notice For NPE-175 Network Processing Engine

Available Languages

Download Options

PDF (35.1 KB)
View with Adobe Reader on a variety of devices

Updated:March 13, 2015

Document ID:1458169323937404

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

END-OF-LIFE, NO. 1126


Addendum date	November 5, 2004
Effective date	September 1, 2004
Original bulletin information	Product Bulletin #1126

The end-of-sale date for the Cisco ® 7200 Series NPE-175 Network Processing Engine was July 15, 2000. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) until July 15, 2005.

Table 1 describes the end-of-life milestones, definitions, and dates for the Cisco NPE-175. Table 2 lists the product part numbers affected by this announcement and replacement product information. This notice is an addendum to the original Cisco NPE-175 end-of-sale and end-of-life bulletin.

The end of software support for the Cisco NPE-175 follows:

• Software support ends in Cisco IOS® Software releases 12.1(14)E, 12.2(24), 12.0(27)S, and 12.2(15)T.

• Bug fixes will be provided for 36 months after the Cisco NPE-175 end-of-sale date (July 15, 2000).

• The last date to receive support from the Cisco TAC is July 15, 2005.

Table 1. End-of-Life Milestones and Dates for Cisco NPE-175


Milestone	Definition	Date
End-of-sale date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	July 15, 2000
Last shipment date	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	October 15, 2000
End of software maintenance releases date	The last date that Cisco Engineering may release any software maintenance releases or bug fixes to the software product. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. The last software releases supported include Cisco IOS Software releases 12.2(24), 12.2(15)T, 12.0(27)S, and 12.1(14)E.	12.0(27)S: July 15, 2003 12.1(14)E: July 15, 2003 12.2(15)T: July 15, 2003 12.2(24): July 15, 2003
End of service contract renewal	The last date to extend or renew a service contract for the product. The extension or renewal period cannot extend beyond the last date of support.	July 15, 2004
Last date of support	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	July 15, 2005

Table 2. Product Part Numbers Affected by This Announcement


End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description
NPE-175	NPE-175 Network Processing Engine for 7200	NPE-400	7200VXR NPE-400 (128 MB default memory)
NPE-175=	NPE-175 Network Processing Engine for 7200, Spare	NPE-400=	7200VXR NPE-400 (128 MB default memory), SPARE
CISCO7204VXR/175	7204VXR Bundle with NPE-175 and I/O Controller without FE	C7206VXR/400/2FE	7206VXR with NPE-400 and I/O Controller with 2 FE/E Ports

PRODUCT MIGRATION OPTIONS

The recommended replacement for the Cisco NPE-175 is the Cisco NPE-400. Note that the Cisco NPE-400 requires a Cisco 7200VXR chassis. More information about the Cisco NPE-400 can be found at: http://www.cisco.com/en/US/prod/collateral/routers/ps341/product_data_sheet09186a00800ae715.html.

PRODUCT TMP OPTIONS

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco Systems ® equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.

FOR MORE INFORMATION

For more information about the Cisco 7200 Series Router, go to http://www.cisco.com/en/US/products/hw/routers/ps341/index.html or contact your Cisco account manager or Cisco channel partner.

For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.

To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.

Contact Cisco

Was this Document Helpful?

Feedback