End-of-Sale and End-of-Life Announcement for the 256-MB Memory Modules for the Cisco 7200 Series Network Processing Engine NPE-G1

Available Languages

Download Options

PDF (94.9 KB)
View with Adobe Reader on a variety of devices

Updated:March 13, 2015

Document ID:1458169284062371

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL6543

Cisco ® announces the end-of-sale and end-of life dates for the 256-MB Memory Modules for the Cisco 7200 Series Network Processing Engine NPE-G1. The last day to order the affected product(s) is February 27, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the 256-MB Memory Modules for the Cisco 7200 Series Network Processing Engine NPE-G1


Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.	August 29, 2008
End-of-Sale Date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	February 27, 2009
Last Ship Date: HW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	May 28, 2009
End of Routine Failure Analysis Date: HW	The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.	February 27, 2010
End of New Service Attachment Date: HW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	February 27, 2010
End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	May 25, 2013
Last Date of Support: HW	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	February 26, 2014

HW = Hardware, OS SW = Operating System Software, App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement


End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description
MEM-NPE-G1-256MB	Two 128MB mem modules (256MB total) for NPE-G1 in 7200	MEM-NPE-G1-512MB	Two 256MB mem modules (512MB total) for NPE-G1 in 7200
MEM-NPE-G1-256MB=	Two 128MB mem modules (256MB total) for NPE-G1 in 7200,Spare	MEM-NPE-G1-512MB=	Two 256MB mem modules (512MB total) for NPE-G1 in 7200

Product Migration Options

The product reaching its end of life is product number MEM-NPE-G1-256MB, two 128-MB memory modules (256 MB total) for the Cisco 7200 Series NPE-G1. Customers are encouraged to migrate to the option providing 512 MB of memory for the Cisco 7200 Series NPE-G1. Information about this product can be found at: http://www.cisco.com/en/US/prod/collateral/modules/ps3931/product_data_sheet09186a00800c6bd6_ps341_Products_Data_Sheet.html .

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/ . The Cisco TMP application requires all users to have a Cisco.com user ID.

Customers may be able to continue to purchase the 256-MB Memory Modules for the Cisco 7200 Series Network Processing Engine NPE-G1 through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos

Service prices for Cisco products are subject to change after the product End-of-Sale date.

For More Information

For more information about the 512-MB memory option for the Cisco 7200 Series NPE-G1, visit http://www.cisco.com/en/US/products/hw/routers/ps341/index.html , or contact your local account representative.

For more information about the Cisco End-of-Life Policy, go to:

http://www.cisco.com/en/US/products/prod_end_of_life.html

To subscribe to receive end-of-life/end-of-sale information, go to:

http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice