Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

End-of-Sale and End-of-Life Announcement for the GSR Engine 3 Line Cards and Performance Route Processor-1 Memory Modules

Available Languages

Download Options

  • PDF     (138.4 KB)
    View with Adobe Reader on a variety of devices
Updated:August 1, 2012
Document ID:1518688314386720

EOL8572

Cisco announces the end-of-sale and end-of-life dates for the GSR Engine 3 Line Cards and Performance Route Processor-1 Memory Modules. The last day to order the affected product(s) is January 29, 2013. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the GSR Engine 3 Line Cards and Performance Route Processor-1 Memory Modules

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

July 31, 2012

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

January 29, 2013

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

April 29, 2013

End of SW Maintenance Releases Date:
HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

January 29, 2014

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

January 29, 2014

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

January 29, 2014

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

April 26, 2017

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

January 31, 2018

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

12816-SFC

Cisco 12816 1280Gbps Switch Fabric Card

See the Product Migration Options section below for detailed information on replacing this product.

-

-

12816-SFC=

Cisco 12816 1280Gbps Switch Fabric Card

See the Product Migration Options section below for detailed information on replacing this product.

-

-

12816E-CSC

12816 1280Gbps Enhanced Clock Scheduler

See the Product Migration Options section below for detailed information on replacing this product.

-

-

12816E-CSC=

Cisco 12816 1280Gbps Enhanced Clock Scheduler Card

See the Product Migration Options section below for detailed information on replacing this product.

-

-

12816E/1280

Enhanced 1280Gbps Fabric Option (3xSFC and 2xCSC) for 12816

See the Product Migration Options section below for detailed information on replacing this product.

-

-

12816E/1280=

Enhanced 1280Gbps Fabric Kit (3xSFC and 2xCSC) for 12816

See the Product Migration Options section below for detailed information on replacing this product.

-

-

2MEM-PRP-1G

2GB Memory - (2x1GB DIMM) Configuration

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-1X256M-SODIMM

Single GSR 256M SODIMM Memory

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-BLZZRD/LC-128

128 MB default route memory for 6CT3-SMB(=)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-DF-LC0-PKT-128

Default Line Card Buffer Memory,64/64 (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-DF-LC1-PKT-256

Default Line Card Buffer Memory, 128MB/128MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-DFT-GRP/LC-128

Default 128MB GRP and L.C. Program/Route Memory (1x128MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-DFT-GRP/LC-64

Default 64MB GRP and L.C. Program/Route Memory (1x64MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-DFT-LC-2X64

128MB (2x64MB) default LC route memory

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-DFT-PKT-64

Default Line Card Buffer Memory, 32/32 (TX/RCV)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-GRP-64

64MB GRP Program/Route Memory (1X64MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-GRP/LC-128

128MB GRP and L.C. Program/Route Memory (1x128MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-GRP/LC-128=

128MB GRP and L.C. Upgrade Kit (1x128MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-GRP/LC-256

256MB GRP and L.C. Program/Route Memory (2x128MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-GRP/LC-256=

256MB GRP and L.C. Upgrade Kit (2x128MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-GRP/LC-32

32MB GRP and L.C. Program/Route Memory (1x32MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-GRP/LC-32=

32MB GRP and L.C. Upgrade Kit (1x32MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-ISE-512A-10PK=

1GB Route Mem for 5 E3 cards (10x512MB - needs 31S SW)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-ISE-512A-2PK

1GB Route Mem upg for 1 E3 card (2x512MB - needs 31S SW)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-ISE-512A-2PK=

1GB Route Mem upg for 1 E3 card (2x512MB - needs 31S SW)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-ISE-512A-4PK=

1GB Route Mem for 2 E3 cards (4x512MB - needs 31S SW)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-ISE-ATM-TOOL=

DIMM Removal Tool (Spare)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-128=

BFR -Line Card Memory 128M Config

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-256=

BFR -Line Card Memory 256M Config

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-32

32MB Line Card Program/Route Memory (1x32MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-32=

32MB Line Card Memory Upgrade Kit (1x32MB)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-64=

BFR -Line Card Memory 64M Config

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-ISE-512

512 (2x256MB) Memory Upgrade for ISE line card

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-ISE-512=

512 (2x256MB) Memory Upgrade for ISE line card

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-ISE-512A

Second 512 (1x512MB) for 1GB - needs 31S or higher

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-ISE-512A=

512MB (1 DIMM) Route Mem for Eng 3 (1x512MB - needs 31S)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-PKT-128=

Line Card Buffer Memory,64MB/64MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-PKT-32

Line Card Buffer Memory,16MB/16MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC-PKT-32=

Line Card Buffer Memory,16MB/16MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC1-PKT-256

Line Card Buffer Memory,128MB/128MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC1-PKT-256=

Line Card Buffer Memory,128MB/128MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC4-256

256 MB (1X256MB) route memory module

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC4-256=

256 MB (1X256MB) route memory module

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC4-512

512 MB (1X512MB) SDRAM route memory

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC4-512=

512 MB (1X512MB) SDRAM route memory

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC4-PKT-512

512MB (256TX/256RX, 4X128MB) packet memory module

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-LC4-PKT-512=

512MB (256TX/256RX, 4X128MB) packet memory module

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PKT-256

Line Card Buffer Memory,128/128 (TX/RCV)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PKT-256=

line card buffer memory, 128MB/128MB (TX/RCV)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PKT-512-UPG

Line Card Buffer Memory,256MB/256MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PKT-512-UPG=

Line Card Buffer Memory,256MB/256MB (Tx/Rx)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PKT-64

Default Line Card Buffer Memory, 64/64 (TX/RCV)

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PKT-64=

Line Card buffer memory, 32/32 TX/RCV, for OC-48 linecard

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PRP-1G

1GB Memory - (1x1GB DIMM) Configuration

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PRP-1G=

1GB Memory - (1x1GB DIMM) Configuration

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PRP-512M

512MB Memory - (1x512MB DIMM) Configuration

See the Product Migration Options section below for detailed information on replacing this product.

-

-

MEM-PRP-512M=

512MB Memory - (1x512MB DIMM) Configuration

See the Product Migration Options section below for detailed information on replacing this product.

-

-

Product Migration Options

Customers are encouraged to migrate to the Cisco XR 12000 Performance Route Processor-3 and Cisco XR 12000 and 12000 Series SPA Interface Processors. Information about these products can be found at: http://www.cisco.com/en/US/prod/collateral/routers/ps167/data_sheet_c78-528730.html and http://www.cisco.com/en/US/prod/collateral/routers/ps167/product_data_sheet0900aecd80465682.html, respectively.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the GSR Engine 3 Line Cards and Performance Route Processor-1 Memory Modules through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For More Information

For more information about the Cisco XR 12000 Performance Route Processor-3 and Cisco XR 12000 and 12000 Series SPA Interface Processors, visit http://www.cisco.com/en/US/prod/collateral/routers/ps167/product_data_sheet0900aecd80465682.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.

Contact Cisco

Was this Document Helpful?

FeedbackFeedback
About Us
Contact Us
Work with Us