Cisco IOS Software Release 12.2(24)SV On The Cisco ONS 15500 Series
PDF(40.1 KB) View with Adobe Reader on a variety of devices
Updated:October 7, 2004
PRODUCT BULLETIN, NO. 2606
This Product Bulletin outlines the software features supported in Cisco IOS® Software Release 12.2(24)SV on the Cisco® 15500 Series Metro Optical Platforms. Cisco IOS Software Release 12.2(24)SV is an ED Release (XED) that is optimized for the Cisco ONS 15500 Series.
The Cisco ONS 15500 Series includes the Cisco ONS 15530 Multiservice Aggregation Platform, Cisco ONS 15540 ESPx Platform, and the Cisco ONS 15540 ESP Platform. These platforms are highly scalable, dense wave division multiplexing (DWDM), Multiservice Aggregation and Transport platforms. The Cisco ONS 15500 Series aggregates Storage, Data, and Legacy application traffic over an ultra-high, bandwidth intelligent, optical infrastructure. The Cisco ONS 15500 Series provides flexible, scalable, and highly available Optical networking for current and future high-performance, bandwidth-intensive networking applications.
Cisco IOS Software Release 12.2(24)SV for both the Cisco ONS 15530 and Cisco ONS 15540 platforms provides the software feature support described in Table 1.
Table 1. Features Supported by Cisco IOS Software Release 12.2(24)SV for the Cisco ONS 15530 and Cisco ONS 15540
Secure Shell version 1 (SSHv1) Client and Server
SSHv1 for Client and Server is implemented per the standard Cisco function and commands.
Simple Network Management Protocol version 3 (SNMPv3)
SNMPv3 is required for use of SNMP in conjunction with SSH.
Counter preservation on CPU switchover
Prior to release 12.2(24)SV, a CPU switchover caused counters to be reset to zero. All history of the counters would be lost. In release 12.2(24)SV, counters are preserved at the point of the switchover and continue incrementing after switchover is complete. Counter preservation is enabled by an optional command. For a complete list of interfaces and counters supported, access the documentation via the links below.
Specific troubleshooting enhancements requested by various customers have been added to 12.2(24)SV. See the release notes and documentation for more details.
Cisco IOS Software Release 12.2(24)SV for the Cisco ONS 15530 supports the features listed in Table 2 for the Cisco ONS 15530 8-Port Fibre Channel/Gigabit Ethernet aggregation cards.
Table 2. Features Supported by Cisco IOS Software Release 12.2(24)SV for the Cisco ONS 15530
IBM InterSystem Channel (ISC-3) Peer Mode 1-Gbps support
Support for the IBM ISC-3 link protocol in 1-Gbps "peer mode" on the Cisco ONS 15530 8-port Fibre Channel/Gigabit Ethernet Aggregation Card (part number 15530-FCGE-8P). The card must have Functional Image 2-30 or later.
Cisco IOS Software Release 12.2(24)SV for the Cisco ONS 15540 supports the features described in Table 3 for the Cisco ONS 15540 ESPx and Cisco ONS 15540 ESP.
Table 3. Features Supported by Cisco IOS Software Release 12.2(24)SV for the Cisco ONS 15540 ESPx and Cisco ONS 15540 ESP
Release 12.2(24)SV adds support for multiple DWDM protected trunks on the same Cisco ONS 15540 ESPx network. The implementation requires separate OADM pairs for each protected network. There are no additional commands required to implement the Multitrunk feature.
Cisco IOS Software Release 12.2(24)SV for the Cisco ONS 15530 and Cisco ONS 15540 carries the part numbers listed in Table 4.
Cisco ONS 15530
Cisco ONS 15540 ESPx
Cisco ONS 15540 ESP
Cisco ONS 15530 SSH 3DES
Cisco ONS 15540 ESPx SSH 3DES
Cisco ONS 15540 ESP SSH 3DES
Customers with SMARTnet
® service contracts are entitled to a software update, which is described as a new release version of the customer last-purchased feature set. For customers wanting increased functionality, an upgrade to the new feature set will be required.
Cisco helps customers with SMARTnet contracts get upgrades quickly through Cisco.com. If customers are upgrading from one feature set to another, they must place an order for the purchase of the appropriate Technology Use or Feature License(s) before downloading the software.
Customers who wish to increase the level of functionality beyond their current feature set must order a software product code along with any appropriate feature licenses.
Downloading Cisco IOS Software Release 12.2(24)SV from Cisco.com
Registered Cisco.com users may download the Cisco IOS Software Release 12.2(24)SV for the Cisco ONS 15530 and Cisco ONS 15540 at
http://cco.cisco.com/ when available. This release is scheduled for October 2004.
Those customers eligible for software upgrades under warranty that do not have service contracts will need to contact the Cisco Technical Assistance Center (TAC) at toll-free 800 553-2447 or by e-mail at: email@example.com