Cisco VPN Client an VPN 300 Concentrator mit IPSec SDI-Authentifizierung (Server-Version 3.3)
Inhalt
Einführung
Der Cisco VPN 3000 Concentrator kann für die Authentifizierung von Cisco VPN-Clients über einen SDI-Server (Security Dynamics International) konfiguriert werden. Der VPN 3000 Concentrator fungiert als SDI-Client und kommuniziert mit dem SDI-Server über den UDP-Port 5500 (User Datagram Protocol). Im folgenden Dokument wird gezeigt, wie Sie sicherstellen können, dass der SDI-Server, der VPN 3000 Concentrator und der Cisco VPN-Client ordnungsgemäß funktionieren, und wie Sie die Komponenten dann kombinieren. Wenn Ihr VPN 300-Concentrator noch nicht konfiguriert wurde, verwenden Sie die Schritte unter VPN 3000 Concentrator Without SDI mit der Befehlszeilenschnittstelle (CLI) für die Erstinstallation und -konfiguration. Wenn der VPN 300-Concentrator bereits konfiguriert wurde, befolgen Sie die Schritte zum Ändern der vorhandenen Konfiguration (ohne SDI).
Voraussetzungen
Anforderungen
Für dieses Dokument bestehen keine besonderen Voraussetzungen.
Verwendete Komponenten
Diese Konfiguration wurde mit den unten stehenden Software- und Hardwareversionen entwickelt und getestet.
-
SDI-Server 3.3 (UNIX und NT)
-
VPN 3000-Konzentrator (2.5.2)
-
VPN-Client 2.5.2.A
Die in diesem Dokument enthaltenen Informationen wurden aus Geräten in einer bestimmten Laborumgebung erstellt. Alle in diesem Dokument verwendeten Geräte haben mit einer leeren (Standard-)Konfiguration begonnen. Wenn Sie in einem Live-Netzwerk arbeiten, stellen Sie sicher, dass Sie die potenziellen Auswirkungen eines Befehls verstehen, bevor Sie es verwenden.
Konventionen
Weitere Informationen zu Dokumentkonventionen finden Sie unter Cisco Technical Tips Conventions (Technische Tipps zu Konventionen von Cisco).
Hintergrundinformationen
Dieses Dokument gilt sowohl für den Cisco VPN 3000 Client (2.5.x) als auch für den Cisco VPN Client (3.x). Ab Version 3.0 können Sie nun einzelne SDI-Server für einzelne Gruppen konfigurieren, im Gegensatz zu einem global definierten und von allen Gruppen verwendeten SDI-Server. Gruppen, für die keine einzelnen SDI-Server konfiguriert sind, verwenden den global definierten SDI-Server.
Es gibt drei Arten von neuen PIN-Modi (Personal Identification Number) in SDI. Der VPN 3000 Concentrator unterstützt die ersten beiden Optionen, wie unten gezeigt.
-
Der Benutzer wählt eine neue PIN aus.
-
Der Server wählt eine neue PIN aus und informiert die Benutzer.
-
Server wählt neue PIN aus und informiert Benutzer. Benutzer können die PIN ändern.
Konfigurieren
In diesem Abschnitt erhalten Sie Informationen zum Konfigurieren der in diesem Dokument beschriebenen Funktionen.
Hinweis: Um weitere Informationen zu den in diesem Dokument verwendeten Befehlen zu erhalten, verwenden Sie das Command Lookup Tool (nur registrierte Kunden).
Netzwerkdiagramm
In diesem Dokument wird die im Diagramm unten dargestellte Netzwerkeinrichtung verwendet.
Konfigurationen
Installieren und Konfigurieren des VPN 3000 Concentrator ohne SDI
Wir konfigurierten den VPN 300 Concentrator für die lokale Authentifizierung eines Benutzers in einer Gruppe. Dadurch können wir vor dem Hinzufügen von SDI feststellen, dass IPSec zwischen dem Cisco VPN Client und dem VPN 3000 Concentrator funktioniert. Die Konfiguration des VPN 300-Konzentrators wurde auf dem Konsolenport gelöscht, indem Sie Administration > System Reboot > Schedule reboot > Reboot with Factory/Default Configuration wechseln.
Nach dem Neustart wurde die folgende Erstkonfiguration durchgeführt:
| Konfiguration des VPN 3000 Concentrator |
|---|
Login: admin
Password:
Welcome to
Cisco Systems
VPN 3000 Concentrator Series
Command Line Interface
Copyright (C) 1998-2000 Cisco Systems, Inc.
-- : Set the time on your device. The correct time is very important,
-- : so that logging and accounting entries are accurate.
-- : Enter the system time in the following format:
-- : HH:MM:SS. Example 21:30:00 for 9:30 PM
> Time
Quick -> [ 13:02:39 ]
-- : Enter the date in the following format.
-- : MM/DD/YYYY Example 06/12/1999 for June 12th 1999.
> Date
Quick -> [ 10/09/2000 ]
-- : Set the time zone on your device. The correct time zone is very
-- : important so that logging and accounting entries are accurate.
-- : Enter the time zone using the hour offset from GMT:
-- : -12 : Kwajalein -11 : Samoa -10 : Hawaii -9 : Alaska
-- : -8 : PST -7 : MST -6 : CST -5 : EST
-- : -4 : Atlantic -3 : Brasilia -2 : Mid-Atlantic -1 : Azores
-- : 0 : GMT +1 : Paris +2 : Cairo +3 : Kuwait
-- : +4 : Abu Dhabi +5 : Karachi +6 : Almaty +7 : Bangkok
-- : +8 : Singapore +9 : Tokyo +10 : Sydney +11 : Solomon Is.
-- : +12 : Marshall Is.
> Time Zone
Quick -> [ -5 ] -5
1) Enable DST Support
2) Disable DST Support
Quick -> [ 1 ]
This table shows current IP addresses.
Interface IP Address/Subnet Mask MAC Address
-------------------------------------------------------------------------------
| Ethernet 1 - Private | 0.0.0.0/0.0.0.0 |
| Ethernet 2 - Public | 0.0.0.0/0.0.0.0 |
| Ethernet 3 - External | 0.0.0.0/0.0.0.0 |
-------------------------------------------------------------------------------
** An address is required for the private interface. **
> Enter IP Address
Quick Ethernet 1 -> [ 0.0.0.0 ] 10.31.1.59
Waiting for Network Initialization...
> Enter Subnet Mask
Quick Ethernet 1 -> [ 255.0.0.0 ] 255.255.255.0
1) Ethernet Speed 10 Mbps
2) Ethernet Speed 100 Mbps
3) Ethernet Speed 10/100 Mbps Auto Detect
Quick Ethernet 1 -> [ 3 ]
1) Enter Duplex - Half/Full/Auto
2) Enter Duplex - Full Duplex
3) Enter Duplex - Half Duplex
Quick Ethernet 1 -> [ 1 ]
1) Modify Ethernet 1 IP Address (Private)
2) Modify Ethernet 2 IP Address (Public)
3) Modify Ethernet 3 IP Address (External)
4) Configure Expansion Cards
5) Save changes to Config file
6) Continue
7) Exit
Quick -> 2
This table shows current IP addresses.
Interface IP Address/Subnet Mask MAC Address
-------------------------------------------------------------------------------
| Ethernet 1 - Private | 10.31.1.59/255.255.255.0 | 00.90.A4.00.1C.B4
| Ethernet 2 - Public | 0.0.0.0/0.0.0.0 |
| Ethernet 3 - External | 0.0.0.0/0.0.0.0 |
-------------------------------------------------------------------------------
> Enter IP Address
Quick Ethernet 2 -> [ 0.0.0.0 ] 172.18.124.134
> Enter Subnet Mask
Quick Ethernet 2 -> [ 255.255.0.0 ] 255.255.255.0
1) Ethernet Speed 10 Mbps
2) Ethernet Speed 100 Mbps
3) Ethernet Speed 10/100 Mbps Auto Detect
Quick Ethernet 2 -> [ 3 ]
1) Enter Duplex - Half/Full/Auto
2) Enter Duplex - Full Duplex
3) Enter Duplex - Half Duplex
Quick Ethernet 2 -> [ 1 ]
1) Modify Ethernet 1 IP Address (Private)
2) Modify Ethernet 2 IP Address (Public)
3) Modify Ethernet 3 IP Address (External)
4) Configure Expansion Cards
5) Save changes to Config file
6) Continue
7) Exit
Quick -> 6
-- : Assign a system name to this device.
> System Name
Quick -> vpn3000
-- : Specify a local DNS server, which lets you enter hostnames
-- : rather than IP addresses while configuring.
> DNS Server
Quick -> [ 0.0.0.0 ]
-- : Enter your Internet domain name; e.g., yourcompany.com
> Domain
Quick ->
> Default Gateway
Quick -> 172.18.124.1
-- : Configure protocols and encryption options.
-- : This table shows current protocol settings
PPTP | L2TP |
---------------------------------------------
| Enabled | Enabled |
| No Encryption Req | No Encryption Req |
---------------------------------------------
1) Enable PPTP
2) Disable PPTP
Quick -> [ 1 ]
1) PPTP Encryption Required
2) No Encryption Required
Quick -> [ 2 ]
1) Enable L2TP
2) Disable L2TP
Quick -> [ 1 ]
1) L2TP Encryption Required
2) No Encryption Required
Quick -> [ 2 ]
1) Enable IPSec
2) Disable IPSec
Quick -> [ 1 ]
-- : Configure address assignment for PPTP, L2TP and IPSec.
1) Enable Client Specified Address Assignment
2) Disable Client Specified Address Assignment
Quick -> [ 2 ]
1) Enable Per User Address Assignment
2) Disable Per User Address Assignment
Quick -> [ 2 ]
1) Enable DHCP Address Assignment
2) Disable DHCP Address Assignment
Quick -> [ 2 ]
1) Enable Configured Pool Address Assignment
2) Disable Configured Pool Address Assignment
Quick -> [ 2 ] 1
> Configured Pool Range Start Address
Quick -> 192.168.1.1
> Configured Pool Range End Address
Quick -> [ 0.0.0.0 ] 192.168.1.100
-- : Specify how to authenticate users
1) Internal Authentication Server
2) RADIUS Authentication Server
3) NT Domain Authentication Server
4) SDI Authentication Server
5) Continue
Quick -> [ 1 ] 1
Current Users
-------------------------------------------------------------------------------
No Users
-------------------------------------------------------------------------------
1) Add a User
2) Delete a User
3) Continue
Quick -> 1
> User Name
Quick -> 37297304
> Password
Quick -> *********
Verify -> *********
Current Users
-------------------------------------------------------------------------------
| 1. 37297304 | |
-------------------------------------------------------------------------------
1) Add a User
2) Delete a User
3) Continue
Quick -> 3
> IPSec Group Name
Quick -> vpn3000
> IPSec Group Password
Quick -> ********
Verify -> ********
-- : We strongly recommend that you change the password for user admin.
> Reset Admin Password
Quick -> [ ***** ]
Verify ->
1) Goto Main Configuration Menu
2) Save changes to Config file
3) Exit
Quick -> 2
1) Goto Main Configuration Menu
2) Save changes to Config file
3) Exit
Quick -> 3
Done
|
Ändern der vorhandenen Konfiguration (ohne SDI)
Wenn der VPN 300 Concentrator zuvor konfiguriert wurde, werden die folgenden Bildschirme zum Überprüfen der Gruppen-, Benutzer- und IPSec/IKE-Einstellungen verwendet:
-
Auf diesem Bildschirm können Sie eine Gruppe mit lokaler Authentifizierung hinzufügen:
-
Auf diesem Bildschirm können Sie der Gruppe einen Benutzer mit lokaler Authentifizierung hinzufügen:
-
Fügen Sie im Bildschirm für IPSec > IKE-Angebot die IKE-Einstellungen hinzu (die angezeigten Einstellungen sind die Systemstandardeinstellungen):
Testen des Cisco VPN-Clients und des VPN 3000-Konzentrators ohne SDI
Nachdem die vorhandene Konfiguration des VPN 300 Concentrator geändert wurde, installieren wir den Cisco VPN Client und konfigurierten eine neue Verbindung, die mit 172.18.124.134 (der öffentlichen Schnittstelle des Konzentrators) endet. Unsere Gruppenzugriffsdaten lauten "vpn3000" (der Name der Gruppe) und das Gruppenkennwort war das Kennwort für die Gruppe. Als wir auf Connect geklickt haben, lautete der Benutzername "37297304" (Benutzername), und das Benutzerkennwort war das Kennwort für den Benutzer (wird lokal im VPN 3000-Konzentrator gespeichert). noch kein SDI beteiligt ist). Siehe Good IPSec Debug with Local Authentication für IKE, IKEDBG, IKEDECODE, IPSEC, IPSECDBG, IPSECDECODE debug.
Testen des SDI-Serverbetriebs ohne VPN 3000-Konzentrator
UNIX (Solaris)
-
Erstellen Sie auf dem SDI-Server mit dem Solaris-Verwaltungstool ein Testkonto.
Der /etc/passwd-Eintrag sollte wie folgt aussehen:
sditest:x:76:10::/local/0/sditest:/local/0/opt/ace/prog/sdshell
Hinweis: Werte und die Pfade zum Hauptverzeichnis des Benutzers und zu "sdshell" hängen vom System ab.
-
Weisen Sie ein Token zum Testen zu.
-
Testen Sie Telnetting im UNIX-Host als sditest. Der Host fordert Sie zur Eingabe eines UNIX-Kennworts und eines PASSCODE auf. Nachdem Sie sich authentifiziert haben, können Sie sich auf diesem Host als sditest einwählen.
Microsoft Windows NT
-
Installieren Sie den SecurSight Agent.
-
Wählen Sie Programme > SecureSight > Testauthentifizierung aus.
Konfigurieren von SDI/Benutzer für Gespräche mit dem VPN 3000-Konzentrator
Führen Sie die folgenden Schritte aus, um SDI/Benutzer für die Kommunikation mit dem VPN 3000 Concentrator zu konfigurieren:
-
Überprüfen Sie im Bildschirm "Token für die Bearbeitung des SDI-Servers", ob das Token "Aktiviert" und nicht im neuen PIN-Modus ist.
-
Klicken Sie auf Token re-synchronisieren und PIN auf Nächstes Tokencode festlegen.
-
Weisen Sie dem Benutzer im Bildschirm "Edit User" (Benutzer bearbeiten) ein Token zu, und vergewissern Sie sich, dass die Option "Allowed to create a PIN" (Zur Erstellung einer PIN zulässig) nicht aktiviert ist.
-
Klicken Sie auf Client Activations (Client-Aktivierungen), und überprüfen Sie, ob der VPN 3000 Concentrator enthalten ist.
Hinweis: Der VPN 3000-Konzentrator gilt als Client des SDI-Servers. Der Bildschirm unten ist der Bildschirm "Add/Edit Client" des SDI-Servers. Da es sich um einen neuen Client handelt, ist das Kästchen "Gesendete Node Secret" ausgegraut. Der SDI-Server hatte nicht die Möglichkeit, die "Node geheime" Datei an den Konzentrator zu senden (diese Datei würde im Konzentrator im Abschnitt Administration > File Management > Files als "SECURID" angezeigt). Nach erfolgreicher Authentifizierung über den VPN 3000 wird die Datei "knotengeheim" im VPN 3000-Konzentrator angezeigt, und das Kontrollkästchen "Geheimer Knoten" wird aktiviert.
-
Klicken Sie auf Benutzeraktivierungen, und überprüfen Sie, ob der Benutzer enthalten ist.
Konfigurieren und Testen des VPN 300 Concentrator für SDI
Führen Sie die folgenden Schritte aus, um den VPN 3000 Concentrator für SDI zu konfigurieren und zu testen.
-
Auf dem folgenden Bildschirm können Sie den VPN 300 Concentrator für die Authentifizierung in SDI konfigurieren:
-
Gehen Sie in SDI zu Bericht > Protokollüberwachung > Aktivitätsüberwachung, und klicken Sie auf OK, um eingehende Anfragen zu beobachten.
-
Klicken Sie im VPN 300-Konzentrator auf Test, um die Verbindung zu testen.
-
Bei guter Authentifizierung wird der VPN 300 Concentrator angezeigt:
Authentifizierung erfolgreich
Im obigen Beispiel haben wir einen globalen SDI-Server definiert. Sie können auch einzelne SDI-Server für jede Gruppe definieren, indem Sie Configuration > User Management > Groups (Konfiguration > Benutzerverwaltung > Gruppen) auswählen, die entsprechende Gruppe markieren und Auth Server ändern auswählen.
Informationen zum Debuggen finden Sie in den folgenden Abschnitten dieses Dokuments:
Überprüfen
Dieser Abschnitt enthält Informationen, mit denen Sie überprüfen können, ob Ihre Konfiguration ordnungsgemäß funktioniert.
Test des Cisco VPN-Clients auf den VPN 3000-Konzentrator mit SDI
Wenn alles bis zu diesem Punkt funktioniert, ist es an der Zeit, den Cisco VPN Client, den VPN 3000 Concentrator und den SDI-Server zu kombinieren. Wir müssen eine Änderung am VPN 300-Konzentrator vornehmen, indem wir die Arbeitsgruppe namens "vpn3000" ändern, um Anfragen an den SDI-Server zu senden.
Fehlerbehebung
Dieser Abschnitt enthält Informationen zur Fehlerbehebung in Ihrer Konfiguration.
Aktivieren des Debuggens im VPN 300-Konzentrator
Klassenname für die Authentifizierung:
-
AUCH
-
AUTHDBG
-
AUTHDECODE
Klassenname für IPSec:
-
IKE, IKEDBG, IKEDECODE
-
IPSEC, IPSECDBG, IPSECDECODE
-
Schweregrad zu Protokoll = 1-9
-
Schweregrad der Konsole = 1-3
Klicken Sie auf Protokoll abrufen, um die Ergebnisse des Debugvorgangs anzuzeigen.
Gutes IPSec-Debug mit lokaler Authentifizierung
1 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=1 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): 00 00 00 00 00 00 00 00
Next Payload : SA (1)
Exchange Type : Oakley Aggressive Mode
Flags : 0
Message ID : 0
Length : 307
7 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=1 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + NONE (0)
... total length : 307
10 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=2 161.44.17.135
processing SA payload
11 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=2 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 120
14 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=3 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ISAKMP (1)
#of Transforms: 4
Spi : 00 00 00 00
Length : 108
18 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=4 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : IKE (1)
Length : 24
20 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=5 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 1:
Encryption Alg: DES-CBC (1)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
24 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=6 161.44.17.135
Transform # 2 Decode for Proposal # 1:
Transform # : 2
Transform ID : IKE (1)
Length : 24
26 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=7 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 2:
Encryption Alg: Triple-DES (5)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
30 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=8 161.44.17.135
Transform # 3 Decode for Proposal # 1:
Transform # : 3
Transform ID : IKE (1)
Length : 24
32 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=9 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 3:
Encryption Alg: Triple-DES (5)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
36 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=10 161.44.17.135
Transform # 4 Decode for Proposal # 1:
Transform # : 4
Transform ID : IKE (1)
Length : 24
38 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=11 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 4:
Encryption Alg: DES-CBC (1)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
42 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=3 161.44.17.135
Proposal # 1, Transform # 1, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
47 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=4 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
50 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=5 161.44.17.135
Proposal # 1, Transform # 2, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
55 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=6 161.44.17.135
Proposal # 1, Transform # 3, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
60 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=7 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
62 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=8 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Encryption Alg:
Rcv'd: Triple-DES
Cfg'd: DES-CBC
65 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=9 161.44.17.135
Proposal # 1, Transform # 4, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
70 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=10 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
73 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=11 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
75 10/10/2000 17:12:32.560 SEV=7 IKEDBG/0 RPT=12 161.44.17.135
Oakley proposal is acceptable
76 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=13 161.44.17.135
processing ke payload
77 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=14 161.44.17.135
processing ISA_KE
78 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=1 161.44.17.135
processing nonce payload
79 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=2 161.44.17.135
Processing ID
80 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=3 161.44.17.135
processing vid payload
81 10/10/2000 17:12:32.580 SEV=9 IKEDBG/23 RPT=1 161.44.17.135
Starting group lookup for peer 161.44.17.135
82 10/10/2000 17:12:32.680 SEV=7 IKEDBG/0 RPT=15 161.44.17.135
Found Phase 1 Group (vpn3000)
83 10/10/2000 17:12:32.680 SEV=7 IKEDBG/14 RPT=1 161.44.17.135
Authentication configured for Internal
84 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=16 161.44.17.135
constructing ISA_SA for isakmp
85 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=17 161.44.17.135
constructing ke payload
86 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=4 161.44.17.135
constructing nonce payload
87 10/10/2000 17:12:32.680 SEV=9 IKE/0 RPT=1 161.44.17.135
Generating keys for Responder...
88 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=5 161.44.17.135
constructing ID
89 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=18
construct hash payload
90 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=19 161.44.17.135
computing hash
91 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=6 161.44.17.135
constructing vid payload
92 10/10/2000 17:12:32.680 SEV=8 IKEDBG/0 RPT=20 161.44.17.135
SENDING Message (msgid=0) with payloads :
HDR + SA (1) ... total length : 248
93 10/10/2000 17:12:32.730 SEV=8 IKEDECODE/0 RPT=12 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Aggressive Mode
Flags : 1 (ENCRYPT )
Message ID : 0
Length : 52
99 10/10/2000 17:12:32.730 SEV=8 IKEDBG/0 RPT=21 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
101 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=22 161.44.17.135
processing hash
102 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=23 161.44.17.135
computing hash
103 10/10/2000 17:12:33.410 SEV=8 IKEDECODE/0 RPT=13 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 308
110 10/10/2000 17:12:33.410 SEV=9 IKEDBG/21 RPT=1 161.44.17.135
Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress
111 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=24 161.44.17.135
constructing blank hash
112 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=25 161.44.17.135
constructing qm hash
113 10/10/2000 17:12:33.410 SEV=8 IKEDBG/0 RPT=26 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 68
115 10/10/2000 17:12:44.680 SEV=8 IKEDECODE/0 RPT=14 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 92
122 10/10/2000 17:12:44.680 SEV=8 IKEDBG/0 RPT=27 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 85
124 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=7
process_attr(): Enter!
125 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=8
Processing cfg reply attributes.
126 10/10/2000 17:12:44.980 SEV=7 IKEDBG/14 RPT=2 161.44.17.135
User [ 37297304 ]
Authentication configured for Internal
127 10/10/2000 17:12:44.980 SEV=4 IKE/52 RPT=7 161.44.17.135
User [ 37297304 ]
User (37297304) authenticated.
128 10/10/2000 17:12:44.980 SEV=9 IKEDBG/31 RPT=1 161.44.17.135
User [ 37297304 ]
Obtained IP addr (192.168.1.1) prior to initiating Mode Cfg (XAuth enabled)
130 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=28 161.44.17.135
User [ 37297304 ]
constructing blank hash
131 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=29 161.44.17.135
0000: 00010004 C0A80101 F0010000 ............
132 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=30 161.44.17.135
User [ 37297304 ]
constructing QM hash
133 10/10/2000 17:12:44.980 SEV=8 IKEDBG/0 RPT=31 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 80
135 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=15 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 68
142 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=32 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 64
144 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=9
process_attr(): Enter!
145 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=10
Processing cfg ACK attributes
146 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=11
Received IPV4 address ack!
147 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=12
Received Save PW ack!
148 10/10/2000 17:12:44.990 SEV=4 AUTH/21 RPT=18
User 37297304 connected
149 10/10/2000 17:12:44.990 SEV=7 IKEDBG/22 RPT=1 161.44.17.135
User [ 37297304 ]
Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed
151 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=33 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0)
... total length : 304
154 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=34 161.44.17.135
User [ 37297304 ]
processing hash
155 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=35 161.44.17.135
User [ 37297304 ]
processing SA payload
156 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=16 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 180
159 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=17 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
163 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=18 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
165 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=19 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
167 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=20 161.44.17.135
Proposal Decode:
Proposal # : 2
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
171 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=21 161.44.17.135
Transform # 1 Decode for Proposal # 2:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
173 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=22 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
175 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=23 161.44.17.135
Proposal Decode:
Proposal # : 3
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
179 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=24 161.44.17.135
Transform # 1 Decode for Proposal # 3:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
181 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=25 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
183 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=26 161.44.17.135
Proposal Decode:
Proposal # : 4
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
187 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=27 161.44.17.135
Transform # 1 Decode for Proposal # 4:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
189 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=28 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
191 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=29 161.44.17.135
Proposal Decode:
Proposal # : 5
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
195 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=30 161.44.17.135
Transform # 1 Decode for Proposal # 5:
Transform # : 1
Transform ID : NULL (11)
Length : 16
197 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=31 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
199 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=32 161.44.17.135
Proposal Decode:
Proposal # : 6
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
203 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=33 161.44.17.135
Transform # 1 Decode for Proposal # 6:
Transform # : 1
Transform ID : NULL (11)
Length : 16
205 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=34 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
207 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=13 161.44.17.135
User [ 37297304 ]
processing nonce payload
208 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=14 161.44.17.135
User [ 37297304 ]
Processing ID
209 10/10/2000 17:12:44.990 SEV=5 IKE/25 RPT=13 161.44.17.135
User [ 37297304 ]
Received remote Proxy Host data in ID Payload:
Address 161.44.17.135, Protocol 0, Port 0
212 10/10/2000 17:12:44.990 SEV=7 IKEDBG/1 RPT=15 161.44.17.135
User [ 37297304 ]
Modifying client proxy src address!
213 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=16 161.44.17.135
User [ 37297304 ]
Processing ID
214 10/10/2000 17:12:44.990 SEV=5 IKE/24 RPT=7 161.44.17.135
User [ 37297304 ]
Received local Proxy Host data in ID Payload:
Address 172.18.124.134, Protocol 0, Port 0
217 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=36 161.44.17.135
User [ 37297304 ]
Processing Notify payload
218 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=35 161.44.17.135
Notify Payload Decode :
DOI : IPSEC (1)
Protocol : ISAKMP (1)
Message : Initial contact (24578)
Spi : 9D F3 34 FE 89 BF AA B2 B7 AD 34 D2 74 4D 05 DA
Length : 28
224 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=37
QM IsRekeyed old sa not found by addr
225 10/10/2000 17:12:44.990 SEV=5 IKE/66 RPT=13 161.44.17.135
User [ 37297304 ]
IKE Remote Peer configured for SA: ESP-3DES-MD5
226 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=38 161.44.17.135
User [ 37297304 ]
processing IPSEC SA
227 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=39
Proposal # 1, Transform # 1, Type ESP, Id DES-CBC
Parsing received transform:
Phase 2 failure:
Mismatched transform IDs for protocol ESP:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
232 10/10/2000 17:12:45.000 SEV=7 IKEDBG/27 RPT=1 161.44.17.135
User [ 37297304 ]
IPSec SA Proposal # 2, Transform # 1 acceptable
233 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=40 161.44.17.135
User [ 37297304 ]
IKE: requesting SPI!
234 10/10/2000 17:12:45.000 SEV=6 IKE/0 RPT=2
AM received unexpected event EV_ACTIVATE_NEW_SA in state AM_ACTIVE
235 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/6 RPT=1
IPSEC key message parse - msgtype 6, len 164, vers 1, pid 00000000, seq 13,
err 0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0,
hashKeyLen 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 300,
lifetime2 2000000000, dsId 2
239 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/1 RPT=1
Processing KEY_GETSPI msg!
240 10/10/2000 17:12:45.000 SEV=7 IPSECDBG/13 RPT=1
Reserved SPI 1773955517
241 10/10/2000 17:12:45.000 SEV=8 IKEDBG/6 RPT=1
IKE got SPI from key engine: SPI = 0x69bc69bd
242 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=41 161.44.17.135
User [ 37297304 ]
oakley constructing quick mode
243 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=42 161.44.17.135
User [ 37297304 ]
constructing blank hash
244 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=43 161.44.17.135
User [ 37297304 ]
constructing ISA_SA for ipsec
245 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=17 161.44.17.135
User [ 37297304 ]
constructing ipsec nonce payload
246 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=18 161.44.17.135
User [ 37297304 ]
constructing proxy ID
247 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=44 161.44.17.135
User [ 37297304 ]
Transmitting Proxy Id:
Remote host: 192.168.1.1 Protocol 0 Port 0
Local host: 172.18.124.134 Protocol 0 Port 0
251 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=45 161.44.17.135
User [ 37297304 ]
constructing QM hash
252 10/10/2000 17:12:45.000 SEV=8 IKEDBG/0 RPT=46 161.44.17.135
SENDING Message (msgid=48687ca1) with payloads :
HDR + HASH (8) ... total length : 136
254 10/10/2000 17:12:45.010 SEV=8 IKEDECODE/0 RPT=36 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 52
261 10/10/2000 17:12:45.010 SEV=8 IKEDBG/0 RPT=47 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
263 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=48 161.44.17.135
User [ 37297304 ]
processing hash
264 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=49 161.44.17.135
User [ 37297304 ]
loading all IPSEC SAs
265 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=19 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
266 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=20 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
267 10/10/2000 17:12:45.020 SEV=7 IKEDBG/0 RPT=50 161.44.17.135
User [ 37297304 ]
Loading host:
Dst: 172.18.124.134
Src: 192.168.1.1
268 10/10/2000 17:12:45.020 SEV=4 IKE/49 RPT=13 161.44.17.135
User [ 37297304 ]
Security negotiation complete for User (37297304)
Responder, Inbound SPI = 0x69bc69bd, Outbound SPI = 0x991518b4
271 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=2
IPSEC key message parse - msgtype 1, Len 536, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 64, label 0, pad 0, spi 991518b4, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
274 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=2
Processing KEY_ADD MSG!
275 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=3
key_msghdr2secassoc(): Enter
276 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=4
No USER filter configured
277 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=5
KeyProcessAdd: Enter
278 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=6
KeyProcessAdd: Adding outbound SA
279 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=7
KeyProcessAdd: src 172.18.124.134 mask 0.0.0.0, dst 192.168.1.1 mask 0.0.0.0
280 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=8
KeyProcessAdd: FilterIpsecAddIkeSa success
281 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=3
IPSEC key message parse - msgtype 3, Len 292, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 32, label 0, pad 0, spi 69bc69bd, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
284 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=9
Processing KEY_UPDATE MSG!
285 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=10
Update inbound SA addresses
286 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=11
key_msghdr2secassoc(): Enter
287 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=12
No USER filter configured
288 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=13
KeyProcessUpdate: Enter
289 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=14
KeyProcessUpdate: success
290 10/10/2000 17:12:45.020 SEV=8 IKEDBG/7 RPT=1
IKE got a KEY_ADD MSG for SA: SPI = 0x991518b4
291 10/10/2000 17:12:45.020 SEV=8 IKEDBG/0 RPT=51
pitcher: rcv KEY_UPDATE, spi 0x69bc69bd
Gutes IPSec-Debug mit lokaler Authentifizierung
1 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=1 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): 00 00 00 00 00 00 00 00
Next Payload : SA (1)
Exchange Type : Oakley Aggressive Mode
Flags : 0
Message ID : 0
Length : 307
7 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=1 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + NONE (0)
... total length : 307
10 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=2 161.44.17.135
processing SA payload
11 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=2 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 120
14 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=3 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ISAKMP (1)
#of Transforms: 4
Spi : 00 00 00 00
Length : 108
18 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=4 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : IKE (1)
Length : 24
20 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=5 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 1:
Encryption Alg: DES-CBC (1)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
24 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=6 161.44.17.135
Transform # 2 Decode for Proposal # 1:
Transform # : 2
Transform ID : IKE (1)
Length : 24
26 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=7 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 2:
Encryption Alg: Triple-DES (5)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
30 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=8 161.44.17.135
Transform # 3 Decode for Proposal # 1:
Transform # : 3
Transform ID : IKE (1)
Length : 24
32 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=9 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 3:
Encryption Alg: Triple-DES (5)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
36 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=10 161.44.17.135
Transform # 4 Decode for Proposal # 1:
Transform # : 4
Transform ID : IKE (1)
Length : 24
38 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=11 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 4:
Encryption Alg: DES-CBC (1)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
42 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=3 161.44.17.135
Proposal # 1, Transform # 1, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
47 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=4 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
50 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=5 161.44.17.135
Proposal # 1, Transform # 2, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
55 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=6 161.44.17.135
Proposal # 1, Transform # 3, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
60 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=7 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
62 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=8 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Encryption Alg:
Rcv'd: Triple-DES
Cfg'd: DES-CBC
65 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=9 161.44.17.135
Proposal # 1, Transform # 4, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
70 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=10 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
73 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=11 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
75 10/10/2000 17:12:32.560 SEV=7 IKEDBG/0 RPT=12 161.44.17.135
Oakley proposal is acceptable
76 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=13 161.44.17.135
processing ke payload
77 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=14 161.44.17.135
processing ISA_KE
78 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=1 161.44.17.135
processing nonce payload
79 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=2 161.44.17.135
Processing ID
80 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=3 161.44.17.135
processing vid payload
81 10/10/2000 17:12:32.580 SEV=9 IKEDBG/23 RPT=1 161.44.17.135
Starting group lookup for peer 161.44.17.135
82 10/10/2000 17:12:32.680 SEV=7 IKEDBG/0 RPT=15 161.44.17.135
Found Phase 1 Group (vpn3000)
83 10/10/2000 17:12:32.680 SEV=7 IKEDBG/14 RPT=1 161.44.17.135
Authentication configured for Internal
84 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=16 161.44.17.135
constructing ISA_SA for isakmp
85 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=17 161.44.17.135
constructing ke payload
86 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=4 161.44.17.135
constructing nonce payload
87 10/10/2000 17:12:32.680 SEV=9 IKE/0 RPT=1 161.44.17.135
Generating keys for Responder...
88 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=5 161.44.17.135
constructing ID
89 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=18
construct hash payload
90 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=19 161.44.17.135
computing hash
91 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=6 161.44.17.135
constructing vid payload
92 10/10/2000 17:12:32.680 SEV=8 IKEDBG/0 RPT=20 161.44.17.135
SENDING Message (msgid=0) with payloads :
HDR + SA (1) ... total length : 248
93 10/10/2000 17:12:32.730 SEV=8 IKEDECODE/0 RPT=12 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Aggressive Mode
Flags : 1 (ENCRYPT )
Message ID : 0
Length : 52
99 10/10/2000 17:12:32.730 SEV=8 IKEDBG/0 RPT=21 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
101 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=22 161.44.17.135
processing hash
102 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=23 161.44.17.135
computing hash
103 10/10/2000 17:12:33.410 SEV=8 IKEDECODE/0 RPT=13 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 308
110 10/10/2000 17:12:33.410 SEV=9 IKEDBG/21 RPT=1 161.44.17.135
Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress
111 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=24 161.44.17.135
constructing blank hash
112 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=25 161.44.17.135
constructing qm hash
113 10/10/2000 17:12:33.410 SEV=8 IKEDBG/0 RPT=26 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 68
115 10/10/2000 17:12:44.680 SEV=8 IKEDECODE/0 RPT=14 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 92
122 10/10/2000 17:12:44.680 SEV=8 IKEDBG/0 RPT=27 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 85
124 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=7
process_attr(): Enter!
125 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=8
Processing cfg reply attributes.
126 10/10/2000 17:12:44.980 SEV=7 IKEDBG/14 RPT=2 161.44.17.135
User [ 37297304 ]
Authentication configured for Internal
127 10/10/2000 17:12:44.980 SEV=4 IKE/52 RPT=7 161.44.17.135
User [ 37297304 ]
User (37297304) authenticated.
128 10/10/2000 17:12:44.980 SEV=9 IKEDBG/31 RPT=1 161.44.17.135
User [ 37297304 ]
Obtained IP addr (192.168.1.1) prior to initiating Mode Cfg (XAuth enabled)
130 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=28 161.44.17.135
User [ 37297304 ]
constructing blank hash
131 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=29 161.44.17.135
0000: 00010004 C0A80101 F0010000 ............
132 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=30 161.44.17.135
User [ 37297304 ]
constructing QM hash
133 10/10/2000 17:12:44.980 SEV=8 IKEDBG/0 RPT=31 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 80
135 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=15 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 68
142 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=32 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 64
144 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=9
process_attr(): Enter!
145 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=10
Processing cfg ACK attributes
146 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=11
Received IPV4 address ack!
147 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=12
Received Save PW ack!
148 10/10/2000 17:12:44.990 SEV=4 AUTH/21 RPT=18
User 37297304 connected
149 10/10/2000 17:12:44.990 SEV=7 IKEDBG/22 RPT=1 161.44.17.135
User [ 37297304 ]
Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed
151 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=33 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0)
... total length : 304
154 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=34 161.44.17.135
User [ 37297304 ]
processing hash
155 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=35 161.44.17.135
User [ 37297304 ]
processing SA payload
156 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=16 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 180
159 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=17 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
163 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=18 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
165 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=19 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
167 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=20 161.44.17.135
Proposal Decode:
Proposal # : 2
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
171 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=21 161.44.17.135
Transform # 1 Decode for Proposal # 2:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
173 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=22 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
175 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=23 161.44.17.135
Proposal Decode:
Proposal # : 3
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
179 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=24 161.44.17.135
Transform # 1 Decode for Proposal # 3:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
181 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=25 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
183 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=26 161.44.17.135
Proposal Decode:
Proposal # : 4
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
187 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=27 161.44.17.135
Transform # 1 Decode for Proposal # 4:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
189 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=28 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
191 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=29 161.44.17.135
Proposal Decode:
Proposal # : 5
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
195 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=30 161.44.17.135
Transform # 1 Decode for Proposal # 5:
Transform # : 1
Transform ID : NULL (11)
Length : 16
197 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=31 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
199 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=32 161.44.17.135
Proposal Decode:
Proposal # : 6
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
203 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=33 161.44.17.135
Transform # 1 Decode for Proposal # 6:
Transform # : 1
Transform ID : NULL (11)
Length : 16
205 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=34 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
207 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=13 161.44.17.135
User [ 37297304 ]
processing nonce payload
208 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=14 161.44.17.135
User [ 37297304 ]
Processing ID
209 10/10/2000 17:12:44.990 SEV=5 IKE/25 RPT=13 161.44.17.135
User [ 37297304 ]
Received remote Proxy Host data in ID Payload:
Address 161.44.17.135, Protocol 0, Port 0
212 10/10/2000 17:12:44.990 SEV=7 IKEDBG/1 RPT=15 161.44.17.135
User [ 37297304 ]
Modifying client proxy src address!
213 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=16 161.44.17.135
User [ 37297304 ]
Processing ID
214 10/10/2000 17:12:44.990 SEV=5 IKE/24 RPT=7 161.44.17.135
User [ 37297304 ]
Received local Proxy Host data in ID Payload:
Address 172.18.124.134, Protocol 0, Port 0
217 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=36 161.44.17.135
User [ 37297304 ]
Processing Notify payload
218 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=35 161.44.17.135
Notify Payload Decode :
DOI : IPSEC (1)
Protocol : ISAKMP (1)
Message : Initial contact (24578)
Spi : 9D F3 34 FE 89 BF AA B2 B7 AD 34 D2 74 4D 05 DA
Length : 28
224 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=37
QM IsRekeyed old sa not found by addr
225 10/10/2000 17:12:44.990 SEV=5 IKE/66 RPT=13 161.44.17.135
User [ 37297304 ]
IKE Remote Peer configured for SA: ESP-3DES-MD5
226 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=38 161.44.17.135
User [ 37297304 ]
processing IPSEC SA
227 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=39
Proposal # 1, Transform # 1, Type ESP, Id DES-CBC
Parsing received transform:
Phase 2 failure:
Mismatched transform IDs for protocol ESP:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
232 10/10/2000 17:12:45.000 SEV=7 IKEDBG/27 RPT=1 161.44.17.135
User [ 37297304 ]
IPSec SA Proposal # 2, Transform # 1 acceptable
233 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=40 161.44.17.135
User [ 37297304 ]
IKE: requesting SPI!
234 10/10/2000 17:12:45.000 SEV=6 IKE/0 RPT=2
AM received unexpected event EV_ACTIVATE_NEW_SA in state AM_ACTIVE
235 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/6 RPT=1
IPSEC key message parse - msgtype 6, len 164, vers 1, pid 00000000, seq 13,
err 0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0,
hashKeyLen 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 300,
lifetime2 2000000000, dsId 2
239 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/1 RPT=1
Processing KEY_GETSPI msg!
240 10/10/2000 17:12:45.000 SEV=7 IPSECDBG/13 RPT=1
Reserved SPI 1773955517
241 10/10/2000 17:12:45.000 SEV=8 IKEDBG/6 RPT=1
IKE got SPI from key engine: SPI = 0x69bc69bd
242 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=41 161.44.17.135
User [ 37297304 ]
oakley constructing quick mode
243 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=42 161.44.17.135
User [ 37297304 ]
constructing blank hash
244 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=43 161.44.17.135
User [ 37297304 ]
constructing ISA_SA for ipsec
245 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=17 161.44.17.135
User [ 37297304 ]
constructing ipsec nonce payload
246 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=18 161.44.17.135
User [ 37297304 ]
constructing proxy ID
247 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=44 161.44.17.135
User [ 37297304 ]
Transmitting Proxy Id:
Remote host: 192.168.1.1 Protocol 0 Port 0
Local host: 172.18.124.134 Protocol 0 Port 0
251 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=45 161.44.17.135
User [ 37297304 ]
constructing QM hash
252 10/10/2000 17:12:45.000 SEV=8 IKEDBG/0 RPT=46 161.44.17.135
SENDING Message (msgid=48687ca1) with payloads :
HDR + HASH (8) ... total length : 136
254 10/10/2000 17:12:45.010 SEV=8 IKEDECODE/0 RPT=36 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 52
261 10/10/2000 17:12:45.010 SEV=8 IKEDBG/0 RPT=47 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
263 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=48 161.44.17.135
User [ 37297304 ]
processing hash
264 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=49 161.44.17.135
User [ 37297304 ]
loading all IPSEC SAs
265 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=19 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
266 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=20 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
267 10/10/2000 17:12:45.020 SEV=7 IKEDBG/0 RPT=50 161.44.17.135
User [ 37297304 ]
Loading host:
Dst: 172.18.124.134
Src: 192.168.1.1
268 10/10/2000 17:12:45.020 SEV=4 IKE/49 RPT=13 161.44.17.135
User [ 37297304 ]
Security negotiation complete for User (37297304)
Responder, Inbound SPI = 0x69bc69bd, Outbound SPI = 0x991518b4
271 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=2
IPSEC key message parse - msgtype 1, Len 536, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 64, label 0, pad 0, spi 991518b4, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
274 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=2
Processing KEY_ADD MSG!
275 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=3
key_msghdr2secassoc(): Enter
276 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=4
No USER filter configured
277 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=5
KeyProcessAdd: Enter
278 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=6
KeyProcessAdd: Adding outbound SA
279 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=7
KeyProcessAdd: src 172.18.124.134 mask 0.0.0.0, dst 192.168.1.1 mask 0.0.0.0
280 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=8
KeyProcessAdd: FilterIpsecAddIkeSa success
281 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=3
IPSEC key message parse - msgtype 3, Len 292, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 32, label 0, pad 0, spi 69bc69bd, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
284 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=9
Processing KEY_UPDATE MSG!
285 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=10
Update inbound SA addresses
286 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=11
key_msghdr2secassoc(): Enter
287 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=12
No USER filter configured
288 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=13
KeyProcessUpdate: Enter
289 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=14
KeyProcessUpdate: success
290 10/10/2000 17:12:45.020 SEV=8 IKEDBG/7 RPT=1
IKE got a KEY_ADD MSG for SA: SPI = 0x991518b4
291 10/10/2000 17:12:45.020 SEV=8 IKEDBG/0 RPT=51
pitcher: rcv KEY_UPDATE, spi 0x69bc69bd
Gutes Debuggen mit SDI
SDI-Debuggen
Erfolgreich (erste Authentifizierung auf SDI)
10/06/2000 11:57:04/U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 11:57:04/L Node Secret Sent to Client zekie.cisco.com 10/06/2000 15:57:05/U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 11:57:05/U PASSCODE Accepted zekie.cisco.com
Erfolgreich (nach der ersten Authentifizierung auf SDI)
10/06/2000 16:06:09U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 12:06:09L PASSCODE Accepted zekie.cisco.com
VPN 3000 Concentrator Debug (im Test)
Debuggen von "Klassenname" für die Authentifizierung:
-
AUCH
-
AUTHDBG
-
AUTHDECODE
4 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/1 RPT=1 AUTH_Open() returns 14 5 10/06/2000 14:09:25.000 SEV=7 AUTH/12 RPT=1 Authentication session opened: handle = 14 6 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/3 RPT=1 AUTH_PutAttrTable(14, 5a2aa0) 7 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/5 RPT=1 AUTH_Authenticate(14, e5187e0, 306bdc) 8 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/59 RPT=1 AUTH_BindServer(71e097c, 0, 0) 9 10/06/2000 14:09:25.000 SEV=9 AUTHDBG/69 RPT=1 Auth Server 649ab4 has been bound to ACB 71e097c, sessions = 1 10 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/65 RPT=1 AUTH_CreateTimer(71e097c, 0, 0) 11 10/06/2000 14:09:25.000 SEV=9 AUTHDBG/72 RPT=1 Reply timer created: handle = 490011 12 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/61 RPT=1 AUTH_BuildMsg(71e097c, 0, 0) 13 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/51 RPT=1 Sdi_Build(71e097c) 14 10/06/2000 14:09:25.010 SEV=8 AUTHDBG/64 RPT=1 AUTH_StartTimer(71e097c, 0, 0) 15 10/06/2000 14:09:25.010 SEV=9 AUTHDBG/73 RPT=1 Reply timer started: handle = 490011, timestamp = 8553930, timeout = 4000 16 10/06/2000 14:09:25.010 SEV=8 AUTHDBG/62 RPT=1 AUTH_SndRequest(71e097c, 0, 0) 17 10/06/2000 14:09:25.010 SEV=8 AUTHDBG/52 RPT=1 Sdi_Xmt(71e097c) 18 10/06/2000 14:09:25.010 SEV=9 AUTHDBG/71 RPT=1 xmit_cnt = 1 19 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/63 RPT=1 AUTH_RcvReply(71e097c, 0, 0) 20 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/53 RPT=1 Sdi_Rcv(71e097c) 21 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/66 RPT=1 AUTH_DeleteTimer(71e097c, 0, 0) 22 10/06/2000 14:09:26.080 SEV=9 AUTHDBG/74 RPT=1 Reply timer stopped: handle = 490011, timestamp = 8554037 23 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/58 RPT=1 AUTH_Callback(71e097c, 0, 0) 24 10/06/2000 14:09:26.080 SEV=6 AUTH/4 RPT=1 Authentication successful: handle = 14, server = 172.18.124.99, user = 37297304 25 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/2 RPT=1 AUTH_Close(14) 26 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/60 RPT=1 AUTH_UnbindServer(71e097c, 0, 0) 27 10/06/2000 14:09:26.080 SEV=9 AUTHDBG/70 RPT=1 Auth Server 649ab4 has been unbound from ACB 71e097c, sessions = 0 28 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/10 RPT=1 AUTH_Int_FreeAuthCB(71e097c) 29 10/06/2000 14:09:26.080 SEV=9 AUTHDBG/19 RPT=1 instance = 15, clone_instance = 0 30 10/06/2000 14:09:26.080 SEV=7 AUTH/13 RPT=1 Authentication session closed: handle = 14
Fehlerhafte Debugger
Ungültiger Benutzername oder ungültiger Benutzer auf dem Client
SDI-Debuggen
10/06/2000 16:30:21U junk/vpn3000 10/06/2000 12:30:21L User Not on Client zekie.cisco.com
VPN 3000-Debugging
21 10/06/2000 14:20:06.310 SEV=3 AUTH/5 RPT=5 Authentication rejected: Reason = Unspecified handle = 15, server = 172.18.124.99, user = junk
Guter Benutzername, schlechter Passcode
SDI-Debuggen
10/06/2000 16:33:07U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 12:33:07L ACCESS DENIED, PASSCODE Incorrect zekie.cisco.com
VPN 3000-Debugging
249 10/06/2000 14:22:52.160 SEV=3 AUTH/5 RPT=6 Authentication rejected: Reason = Unspecified handle = 16, server = 172.18.124.99, user = 37297304
SDI-Server nicht erreichbar oder Daemon ausgefallen
SDI-Debuggen
Zeigt nichts an (keine Anfrage erhalten)
VPN 3000-Debugging
77 10/06/2000 14:28:55.600 SEV=4 AUTH/9 RPT=7 Authentication failed: Reason = Network error handle = 17, server = 172.18.124.99, user = 37297304
VPN 3000 nicht als Client auf SDI-Box konfiguriert
SDI-Debuggen
10/06/2000 17:37:42U --/172.18.124.134 -->/ 10/06/2000 13:36:42L Client Not Found zekie.cisco.com
VPN 3000-Debugging
113 10/06/2000 15:26:27.440 SEV=3 AUTH/5 RPT=8 Authentication rejected: Reason = Unspecified handle = 21, server = 172.18.124.99, user = 37297304
VPN 3000 Concentrator als Client vom SDI-Server entfernt und anschließend neu hinzugefügt
Der SDI-Server versuchte, die SECURID-Datei herunterzuladen, um die alte zu ersetzen, aber die VPN 3000 hatte diese Datei bereits.
Nachricht über SDI
10/06/2000 13:42:18L Node Verification Failed zekie.cisco.com
VPN 3000-Debugging
21 10/06/2000 15:32:03.030 SEV=3 AUTH/5 RPT=9 Authentication rejected: Reason = Unspecified handle = 22, server = 172.18.124.99, user = 37297304
Um dieses Problem zu beheben, löschen Sie die SECURID-Datei im VPN 3000 Concentrator. Gehen Sie dazu zu Administration > File Management > Files > SECURID > Delete (Verwaltung > Dateiverwaltung > Dateien > SICHERHEIT > Löschen). Nach einem erneuten Test akzeptiert der VPN 300 Concentrator die neue Datei vom SDI-Server. Wenn das Kontrollkästchen Edit Client > Sent Node Secret (Client bearbeiten > Geheime Node Secret) in der SDI deaktiviert ist, konnte der SDI-Server den Austausch nicht abschließen. Sobald der VPN 300 Concentrator über die SECURID-Datei verfügt, ist das Kontrollkästchen Sent Node Secret (Geheimer Knoten senden) aktiviert/nicht grau ausgegraut.
Zugehörige Informationen
Revisionsverlauf
| Überarbeitung | Veröffentlichungsdatum | Kommentare |
|---|---|---|
1.0 |
14-Jan-2008 |
Erstveröffentlichung |
Feedback