Konfigurieren des Cisco VPN 3002 Hardware-Clients für den Cisco IOS-Router mit EzVPN im Netzwerkerweiterungsmodus

Download-Optionen

  • PDF     (621.7 KB)
    Mit Adobe Reader auf verschiedenen Geräten anzeigen
  • ePub     (388.4 KB)
    In verschiedenen Apps auf iPhone, iPad, Android, Sony Reader oder Windows Phone anzeigen
  • Mobi (Kindle)     (423.7 KB)
    Auf einem Kindle-Gerät oder einer Kindle-App auf mehreren Geräten anzeigen
Aktualisiert:7. Februar 2007
Dokument-ID:24226

Inklusive Sprache

In dem Dokumentationssatz für dieses Produkt wird die Verwendung inklusiver Sprache angestrebt. Für die Zwecke dieses Dokumentationssatzes wird Sprache als „inklusiv“ verstanden, wenn sie keine Diskriminierung aufgrund von Alter, körperlicher und/oder geistiger Behinderung, Geschlechtszugehörigkeit und -identität, ethnischer Identität, sexueller Orientierung, sozioökonomischem Status und Intersektionalität impliziert. Dennoch können in der Dokumentation stilistische Abweichungen von diesem Bemühen auftreten, wenn Text verwendet wird, der in Benutzeroberflächen der Produktsoftware fest codiert ist, auf RFP-Dokumentation basiert oder von einem genannten Drittanbieterprodukt verwendet wird. Hier erfahren Sie mehr darüber, wie Cisco inklusive Sprache verwendet.

Informationen zu dieser Übersetzung

Cisco hat dieses Dokument maschinell übersetzen und von einem menschlichen Übersetzer editieren und korrigieren lassen, um unseren Benutzern auf der ganzen Welt Support-Inhalte in ihrer eigenen Sprache zu bieten. Bitte beachten Sie, dass selbst die beste maschinelle Übersetzung nicht so genau ist wie eine von einem professionellen Übersetzer angefertigte. Cisco Systems, Inc. übernimmt keine Haftung für die Richtigkeit dieser Übersetzungen und empfiehlt, immer das englische Originaldokument (siehe bereitgestellter Link) heranzuziehen.

Einleitung

In diesem Dokument wird die Konfiguration eines Cisco VPN 3002 Hardware-Clients beschrieben, der mit Cisco IOS® Routern im Netzwerkerweiterungsmodus über Cisco IOS Software, Version 12.2(8)T, und Easy VPN (EzVPN)-Serverfunktionen verbunden ist. Dadurch kann Cisco IOS VPN-Tunnel terminieren, die von EzVPN-Clients wie VPN-Clients, PIX und Cisco IOS EzVPN-Clients stammen. Es gibt mindestens fünf Sicherheitszuordnungen (SAs) (eine Internet Key Exchange [IKE] plus vier IPSec), wenn der VPN-Client eine Verbindung mit einem Headend-Gerät herstellt. Dies ist darauf zurückzuführen, dass der VPN-Client, wenn er eine Verbindung zum Headend herstellt, immer zwei IPSec-SAs mit einer IP-Adresse der öffentlichen Schnittstelle eines Konzentrators an die IP-Adresse des Headends aushandelt. Dieser Tunnel wird zu Verwaltungszwecken verwendet, um eine Verbindung zum VPN-Client vom Headend entweder über die GUI oder die Befehlszeilenschnittstelle (CLI) herzustellen. Dies geschieht automatisch. Die beiden anderen betreffen den Datenverkehr zwischen den Netzwerken hinter dem VPN-Client und dem Cisco IOS-Router.

Weitere Informationen zum gleichen Szenario, in dem der VPN-Server PIX 6.x ist, finden Sie unter Configuring the VPN 3002 Hardware Client to PIX 6.x (Konfigurieren des VPN 3002-Hardware-Clients für PIX 6.x).

Unter Konfigurieren einer Verbindung zwischen dem VPN 3002 Hardware-Client und einem VPN 3000 Concentrator im Netzwerkerweiterungsmodus erfahren Sie mehr über dasselbe Szenario, in dem der VPN-Server der Cisco VPN 3000 Serie Concentrator ist.

Voraussetzungen

Anforderungen

Es gibt keine spezifischen Anforderungen für dieses Dokument.

Verwendete Komponenten

Die Informationen in diesem Dokument basierend auf folgenden Software- und Hardware-Versionen:

  • Cisco VPN 3002 Hardware-Client

  • Cisco IOS Software, Version 12.2(8)T und höher

Die Informationen in diesem Dokument beziehen sich auf Geräte in einer speziell eingerichteten Testumgebung. Alle Geräte, die in diesem Dokument benutzt wurden, begannen mit einer gelöschten (Nichterfüllungs) Konfiguration. Wenn Ihr Netz Live ist, überprüfen Sie, ob Sie die mögliche Auswirkung jedes möglichen Befehls verstehen.

Konventionen

Weitere Informationen zu Dokumentkonventionen finden Sie unter Cisco Technical Tips Conventions (Technische Tipps von Cisco zu Konventionen).

Konfigurationen

In diesem Abschnitt erfahren Sie, wie Sie die in diesem Dokument beschriebenen Funktionen konfigurieren können.

Hinweis: Verwenden Sie das Tool für die Suche nach Befehlen (nur für registrierte Kunden), um weitere Informationen zu den in diesem Dokument verwendeten Befehlen zu erhalten.

Netzwerkdiagramm

In diesem Dokument wird die folgende Netzwerkeinrichtung verwendet:

vpn-3k2-ios-nem-lea-1.gif

In diesem Dokument werden folgende Konfigurationen verwendet.

Cisco IOS-Router 
akim#show running 
Current configuration : 1449 bytes
!
version 12.2
service config
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname akim
!

!--- Enable Authentication, Authorizing and Accounting (AAA) !--- for user authentication and group authorization.

aaa new-model

!--- To enable X-Auth for user authentication, !--- enable the AAA commands.

aaa authentication login userauthen local

!--- To enable group authorization, !--- enable the AAA commands.

aaa authorization network groupauthor local
aaa session-id common
!

!--- Define the username and password to be used for X-Auth.

username fadi password 0 cisco
memory-size iomem 10
ip subnet-zero
!
!
!

!--- Create an Internet Security Association and !--- Key Management Protocol (ISAKMP) policy for Phase 1 negotiations.

crypto isakmp policy 3
 encr 3des
 authentication pre-share
 group 2
!

!--- Create a group with the pre-shared key for IKE authentication.

crypto isakmp client configuration group fadigroup
 key cisco123
!
!

!--- Create the Phase 2 policy for actual data encryption.

crypto ipsec transform-set myset esp-3des esp-sha-hmac
!

!--- Create a dynamic map and !--- apply the transform set that was created earlier.

crypto dynamic-map dynmap 10
 set transform-set myset
!

!--- Create the actual crypto map, !--- and apply the AAA lists that were created earlier. !--- These commands associate the AAA commands to the crypto map.

crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
!
!
!
!
!
!
!
!
fax interface-type fax-mail
mta receive maximum-recipients 0
!
!
!
!

!--- Apply the crypto map on the interface where !--- traffic leaves the router.

interface FastEthernet0/0
 ip address 209.165.202.129 255.255.255.224
duplex auto
 speed auto
 crypto map clientmap
!
interface Serial0/0
 no ip address
 shutdown
 no fair-queue
 clockrate 2000000
!
interface FastEthernet0/1
 ip address 10.48.220.1 255.255.254.0
duplex auto
 speed auto
!
interface Serial0/1
 no ip address
 shutdown
 clockrate 2000000
!
ip classless
ip route 0.0.0.0 0.0.0.0 209.165.202.130
ip http server
ip pim bidir-enable
!
!
!
!
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
!
!
end

Konfigurieren des Cisco VPN 3002-Hardware-Clients

Gehen Sie wie folgt vor, um den VPN-Client zu konfigurieren:

  1. Wählen Sie Konfiguration > Schnittstellen aus, und überprüfen Sie die IP-Adresse.

    vpn-3k2-ios-nem-lea-2.jpg

  2. Wählen Sie Configuration > Quick > Time and Date > Time aus, um die Uhrzeit festzulegen und zu überprüfen.

    vpn-3k2-ios-nem-lea-3.jpg

  3. Wählen Sie Configuration > Quick > Private Interface > Private Intf aus, um die statischen IP-Adressen auf den internen Hosts (ohne DHCP) zu konfigurieren.

  4. Wählen Sie Nein für "Möchten Sie die IP-Adresse der privaten Schnittstelle konfigurieren?" aus.

  5. Wählen Sie Nein. Verwenden Sie den DHCP-Server nicht, um Adressen für "Möchten Sie den DHCP-Server an Schnittstelle 1 verwenden, um Adressen für das lokale LAN bereitzustellen?" anzugeben.

    vpn-3k2-ios-nem-lea-4.jpg

  6. Geben Sie die IP-Adresse an, wenn Sie statisch sind, indem Sie Configuration > Quick > Public Interface > Public Intf auswählen.

  7. Wählen Sie im Fenster Public Interface (Öffentliche Schnittstelle) die Option Specify an IP address (IP-Adresse angeben) aus, und geben Sie die entsprechende IP-Adresse, Subnetzmaske und das entsprechende Standard-Gateway ein.

    vpn-3k2-ios-nem-lea-5.jpg

  8. Konfigurieren Sie den Remote-VPN-Peer (öffentliche IP-Adresse des Routers). Wählen Sie dazu Configuration > Quick > IPSec aus, und geben Sie fadigroup als Gruppennamen, cisco123 als Gruppenkennwort, fadi als Benutzernamen und cisco als Benutzerkennwort ein.

    vpn-3k2-ios-nem-lea-6.gif

  9. Wählen Sie Configuration > Quick > PAT aus, und wählen Sie No (Nein) aus. Verwenden Sie den Network Extension-Modus aus dem PAT-Fenster, um den Network Extension-Modus zu konfigurieren.

    vpn-3k2-ios-nem-lea-7.jpg

  10. Wählen Sie Configuration > Quick > DNS aus, und geben Sie den DNS-Server und den Domänennamen des ISP ein, um DNS zu konfigurieren.

    vpn-3k2-ios-nem-lea-8.jpg

  11. Wählen Sie Configuration > Quick > Static Routes aus, und klicken Sie auf Add, um der Routing-Tabelle eine statische Route hinzuzufügen, um das Standard-Gateway des VPN-Clients zu konfigurieren.

    vpn-3k2-ios-nem-lea-9.jpg

Überprüfung

Diese Abschnitt enthält Informationen, mit denen Sie überprüfen können, ob Ihre Konfiguration ordnungsgemäß funktioniert.

Das Output Interpreter-Tool (OIT) (nur registrierte Kunden) unterstützt bestimmte show-Befehle. Verwenden Sie das OIT, um eine Analyse der show-Befehlsausgabe anzuzeigen.

Weitere Informationen zu den entsprechenden show-Befehlen finden Sie unter IP Security Troubleshooting - Understanding and Using debug Commands.

Fehlerbehebung

In diesem Abschnitt finden Sie Informationen zur Behebung von Fehlern in Ihrer Konfiguration.

Hinweis: Wenn PAT Enabled (PAT aktiviert) im Cisco VPN 3002-Client verwendet wird, werden beim Neuladen Benutzername und Kennwort entfernt. Sie müssen den neuen Benutzernamen und das Kennwort für den Client konfigurieren.

Hinweis: Wenn PAT Disabled (NEM) verwendet wird, werden Benutzername und Kennwort beim erneuten Laden beibehalten, vorausgesetzt, das Headend ist für das Speichern des Benutzernamens und Kennworts konfiguriert.

Fehlerbehebungsverfahren

Dies sind Informationen zur Fehlerbehebung, die für diese Konfiguration relevant sind. Weitere Informationen zur Fehlerbehebung finden Sie unter IP Security Troubleshooting - Understanding and Using debug Commands . Gehen Sie wie folgt vor, um Probleme mit Ihrer Konfiguration zu beheben:

  1. Stellen Sie sicher, dass die SA-Einrichtung für Phase 1 und Phase 2 angezeigt wird. Verwenden Sie die Debug-Baseline im Abschnitt Troubleshooting Commands (Fehlerbehebungsbefehle).

  2. Sobald die SAs angezeigt werden, senden Sie Datenverkehr zwischen den geschützten Netzwerken, um die Verbindung zu testen.

Befehle für die Fehlerbehebung

Das Output Interpreter-Tool (OIT) (nur registrierte Kunden) unterstützt bestimmte show-Befehle. Verwenden Sie das OIT, um eine Analyse der show-Befehlsausgabe anzuzeigen.

Hinweis: Lesen Sie den Artikel Important Information on Debug Commands (Wichtige Informationen zu Debug-Befehlen), bevor Sie debug-Befehle verwenden.

  • debug crypto ipsec: Zeigt IPSec-Ereignisse an.

  • debug crypto isakmp: Zeigt Meldungen zu IKE-Ereignissen an.

  • debug crypto engine (Kryptografiemodul debuggen): Zeigt Debug-Meldungen über Kryptografiemodule an, die eine Ver- und Entschlüsselung durchführen. 


!--- Cisco IOS has received a request for new SA from the VPN Client.
 
03:36:19: ISAKMP (0:0): received packet from 209.165.200.225 (N) NEW SA 
03:36:19: ISAKMP: local port 500, remote port 500 
03:36:19: ISAKMP (0:1): (Re)Setting client xauth list userauthen and state 
03:36:19: ISAKMP: Locking CONFIG struct 0x631B752C from crypto_ikmp_config_initialize_sa, 
count 1 
03:36:19: ISAKMP (0:1): processing SA payload. message ID = 0 
03:36:19: ISAKMP (0:1): processing ID payload. message ID = 0 
03:36:19: ISAKMP (0:1): processing vendor id payload 
03:36:19: ISAKMP (0:1): vendor ID seems Unity/DPD but bad major 
03:36:19: ISAKMP (0:1): vendor ID is XAUTH 
03:36:19: ISAKMP (0:1): processing vendor id payload 
03:36:19: ISAKMP (0:1): vendor ID is Unity 

!--- Cisco IOS checks the incoming ISAKMP proposal with the policy !--- defined in Cisco IOS.
 
03:36:19: ISAKMP (0:1): Checking ISAKMP transform 1 against priority 3 policy 
03:36:19: ISAKMP:      default group 2 
03:36:19: ISAKMP:      encryption 3DES-CBC 
03:36:19: ISAKMP:      hash SHA 
03:36:19: ISAKMP:      auth XAUTHInitPreShared 
03:36:19: ISAKMP:      life type in seconds 
03:36:19: ISAKMP:      life duration (VPI) of  0x7F 0xFF 0xFF 0xFF 
03:36:19: ISAKMP (0:1): atts are acceptable. Next payload is 3 
03:36:19: CryptoEngine0: generate alg parameter 
03:36:19: CRYPTO_ENGINE: Dh phase 1 status: 0 
03:36:19: CRYPTO_ENGINE: Dh phase 1 status: 0 
03:36:19: ISAKMP (0:1): processing KE payload. message ID = 0 
03:36:19: CryptoEngine0: generate alg parameter 
03:36:19: ISAKMP (0:1): processing NONCE payload. message ID = 0 
03:36:19: ISAKMP (0:1): processing vendor id payload 
03:36:19: ISAKMP (0:1): vendor ID seems Unity/DPD but bad major 
03:36:19: ISAKMP (0:1): vendor ID is XAUTH 
03:36:19: ISAKMP (0:1): processing vendor id payload 
03:36:19: ISAKMP (0:1): vendor ID is Unity 
03:36:19: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH 
Old State = IKE_READY  New State = IKE_R_AM_AAA_AWAIT 
03:36:19: ISAKMP: got callback 1 
03:36:19: CryptoEngine0: create ISAKMP SKEYID for conn id 1 
03:36:19: ISAKMP (0:1): SKEYID state generated 
03:36:19: ISAKMP (0:1): SA is doing pre-shared key authentication plux 
XAUTH using id type ID_IPV4_ADDR 
03:36:19: ISAKMP (1): ID payload 
        next-payload : 10 
        type         : 1 
        protocol     : 17 
        port         : 500 
        length       : 8 
03:36:19: ISAKMP (1): Total payload length: 12 
03:36:19: CryptoEngine0: generate hmac context for conn id 1 
03:36:19: ISAKMP (0:1): sending packet to 209.165.200.225 
(R) AG_INIT_EXCH 
03:36:19: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY 
Old State = IKE_R_AM_AAA_AWAIT  New State = IKE_R_AM2 
03:36:27: ISAKMP (0:1): received packet from 209.165.200.225 
(R) AG_INIT_EXCH 
03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) AG_INIT_EXCH 
03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 
(R) AG_INIT_EXCH 
03:36:28: ISAKMP (0:1): processing HASH payload. message ID = 0 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP (0:1): processing NOTIFY INITIAL_CONTACT protocol 1 
        spi 0, message ID = 0, sa = 63393F7C 
03:36:28: ISAKMP (0:1): Process initial contact, bring down 
existing phase 1 and 2 SA's 
03:36:28: ISAKMP (0:1): returning IP addr to the address pool 
03:36:28: ISAKMP (0:1): peer does not do paranoid keepalives. 
03:36:28: ISAKMP (0:1): processing vendor id payload 
03:36:28: ISAKMP (0:1): vendor ID is DPD 

!--- Phase 1 is now complete and ISAKMP SA is negoitated.
 
03:36:28: ISAKMP (0:1): SA has been authenticated with 
209.165.200.225 
  
  
03:36:28: CryptoEngine0: clear dh number for conn id 1 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) QM_IDLE 
03:36:28: ISAKMP (0:1): purging node -2033367886 
03:36:28: ISAKMP: Sending phase 1 responder lifetime 86400 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH 
Old State = IKE_R_AM2  New State = IKE_P1_COMPLETE 
03:36:28: IPSEC(key_engine): got a queue event... 
03:36:28: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP 
03:36:28: IPSEC(key_engine_delete_sas): delete all SAs shared 
with 209.165.200.225 

!--- Proceed to the Extended Authentication. !--- Remember that XAUTH is done before Phase 2 and after Phase 1.
 
03:36:28: ISAKMP (0:1): Need XAUTH 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE 
Old State = IKE_P1_COMPLETE  New State = IKE_XAUTH_AAA_START_LOGIN_AWAIT 
03:36:28: ISAKMP: got callback 1 
03:36:28: ISAKMP/xauth: request attribute XAUTH_TYPE_V2 
03:36:28: ISAKMP/xauth: request attribute XAUTH_MESSAGE_V2 
03:36:28: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2 
03:36:28: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP (0:1): initiating peer config to 
209.165.200.225. ID = 1189186805 
03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) CONF_XAUTH 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, IKE_AAA_START_LOGIN 
Old State = IKE_XAUTH_AAA_START_LOGIN_AWAIT  New State = IKE_XAUTH_REQ_SENT 
03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) CONF_XAUTH 
03:36:28: ISAKMP (0:1): processing transaction payload from 209.165.200.225. 
message ID = 1189186805 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP: Config payload REPLY 
03:36:28: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2 
03:36:28: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2 
03:36:28: ISAKMP (0:1): deleting node 1189186805 error FALSE reason 
"done with xauth request/reply exchange" 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY 
Old State = IKE_XAUTH_REQ_SENT  New State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT 
03:36:28: ISAKMP: got callback 1 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP (0:1): initiating peer config to 209.165.200.225. 
ID = 1490194005 
03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) CONF_XAUTH 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN 
Old State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT  New State = IKE_XAUTH_SET_SENT 
03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) CONF_XAUTH 
03:36:28: ISAKMP (0:1): processing transaction payload from 
209.165.200.225. message ID = 1490194005 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP: Config payload ACK 
03:36:28: ISAKMP (0:1):        XAUTH ACK Processed 
03:36:28: ISAKMP (0:1): deleting node 1490194005 error 
FALSE reason "done with transaction" 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_CFG_ACK 
Old State = IKE_XAUTH_SET_SENT  New State = IKE_P1_COMPLETE 
03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 
03:36:28: ISAKMP (0:1): processing transaction payload from 
209.165.200.225. message ID = 113305927 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP: Config payload REQUEST 
03:36:28: ISAKMP (0:1): checking request: 
03:36:28: ISAKMP:    IP4_DNS 
03:36:28: ISAKMP:    IP4_DNS 
03:36:28: ISAKMP:    IP4_NBNS 
03:36:28: ISAKMP:    IP4_NBNS 
03:36:28: ISAKMP:    SPLIT_INCLUDE 
03:36:28: ISAKMP:    DEFAULT_DOMAIN 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7005 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7007 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7800 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7801 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7802 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7803 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7804 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7805 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7806 
03:36:28: ISAKMP:    UNKNOWN Unknown Attr: 0x7009 
03:36:28: ISAKMP:    APPLICATION_VERSION 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST 
Old State = IKE_P1_COMPLETE  New State = IKE_CONFIG_AUTHOR_AAA_AWAIT 
03:36:28: ISAKMP (0:1): Unknown Input: state = IKE_CONFIG_AUTHOR_AAA_AWAIT, 
major, minor = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE 
03:36:28: ISAKMP: got callback 1 
03:36:28: ISAKMP (0:1): Config attributes requested butconfig attributes
 not in crypto map.  Sending empty reply. 
03:36:28: ISAKMP (0:1): attributes sent in message: 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7005) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7007) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7800) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7801) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7802) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7803) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7804) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7805) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7806) 
03:36:28: ISAKMP: Unknown Attr: UNKNOWN (0x7009) 
03:36:28: ISAKMP: Sending APPLICATION_VERSION string: Cisco 
Internetwork Operating System Software 
IOS (tm) 3600 Software (C3640-JK9S-M), Version 12.2(8)T1,  
RELEASE SOFTWARE (fc2) 
TAC Support: http://www.cisco.com/tac 
Copyright (c) 1986-2002 by cisco Systems, Inc. 
Compiled Sun 31-Mar-02 03:30 by ccai 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP (0:1): responding to peer config from 
209.165.200.225. ID = 113305927 
03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) CONF_ADDR 
03:36:28: ISAKMP (0:1): deleting node 113305927 error FALSE reason "" 
03:36:28: ISAKMP (0:1): Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR 
Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT  New State = IKE_P1_COMPLETE 
03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP (0:1): processing HASH payload. message ID = 1022849755 
03:36:28: ISAKMP (0:1): processing SA payload. message ID = 1022849755 

!--- ISAKMP now verifies the IPSec proposal !--- to see if it is acceptable. 

03:36:28: ISAKMP (0:1): Checking IPSec proposal 1 
03:36:28: ISAKMP: transform 1, ESP_3DES 
03:36:28: ISAKMP:   attributes in transform: 
03:36:28: ISAKMP:      SA life type in seconds 
03:36:28: ISAKMP:      SA life duration (VPI) of  0x7F 0xFF 0xFF 0xFF 
03:36:28: ISAKMP:      encaps is 1 
03:36:28: ISAKMP:      authenticator is HMAC-SHA 
03:36:28: validate proposal 0 
03:36:28: ISAKMP (0:1): atts are acceptable. 

!--- As the attributes are acceptable, ISAKMP asks !--- IPSec to validate the proposal. 

03:36:28: IPSEC(validate_proposal_request): proposal part #1, 
  (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, 
    local_proxy= 209.165.202.129/255.255.255.255/0/0 (type=1), 
    remote_proxy= 209.165.200.225/255.255.255.255/0/0 (type=1), 
    protocol= ESP, transform= esp-3des esp-sha-hmac , 
    lifedur= 0s and 0kb, 
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 
03:36:28: validate proposal request 0 
03:36:28: ISAKMP (0:1): processing NONCE payload. message ID = 1022849755 
03:36:28: ISAKMP (0:1): processing ID payload. message ID = 1022849755 
03:36:28: ISAKMP (0:1): processing ID payload. message ID = 1022849755 
03:36:28: ISAKMP (0:1): asking for 1 spis from ipsec 
03:36:28: ISAKMP (0:1): Node 1022849755, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH 
Old State = IKE_QM_READY  New State = IKE_QM_SPI_STARVE 
03:36:28: IPSEC(key_engine): got a queue event... 
03:36:28: IPSEC(spi_response): getting spi 1910172102 for SA 
        from 209.165.202.129 to 209.165.200.225 for prot 3 
03:36:28: ISAKMP: received ke message (2/1) 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ISAKMP (0:1): sending packet to 209.165.200.225 (R) QM_IDLE 
03:36:28: ISAKMP (0:1): Node 1022849755, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY 
Old State = IKE_QM_SPI_STARVE  New State = IKE_QM_R_QM2 
03:36:28: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 
03:36:28: CryptoEngine0: generate hmac context for conn id 1 
03:36:28: ipsec allocate flow 0 
03:36:28: ipsec allocate flow 0 

!--- After IPSec validates the proposal, !--- IPSec proceeds to create the IPSec SAs.
 
03:36:28: ISAKMP (0:1): Creating IPSec SAs 
03:36:28:         inbound SA from 209.165.200.225 to 209.165.202.129 
        (proxy 209.165.200.225 to 209.165.202.129) 
03:36:28:         has spi 0x71DAE9C6 and conn_id 2000 and flags 4 
03:36:28:         lifetime of 2147483647 seconds 
03:36:28:         outbound SA from 209.165.202.129 to 209.165.200.225 
(proxy 209.165.202.129 to 209.165.200.225) 
03:36:28:         has spi 101033821 and conn_id 2001 and flags C 
03:36:28:         lifetime of 2147483647 seconds 
03:36:28: ISAKMP (0:1): deleting node 1022849755 error FALSE 
reason "quick mode done (await()" 
03:36:28: ISAKMP (0:1): Node 1022849755, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH 
Old State = IKE_QM_R_QM2  New State = IKE_QM_PHASE2_COMPLETE 
03:36:28: IPSEC(key_engine): got a queue event... 
03:36:28: IPSEC(initialize_sas): , 
  (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, 

!--- This is the management tunnel. 

    local_proxy= 209.165.202.129/0.0.0.0/0/0 (type=1), 
    remote_proxy= 209.165.200.225/0.0.0.0/0/0 (type=1), 
protocol= ESP, transform= esp-3des esp-sha-hmac , 
    lifedur= 2147483647s and 0kb, 
    spi= 0x71DAE9C6(1910172102), conn_id= 2000, keysize= 0, flags= 0x4 
03:36:28: IPSEC(initialize_sas): , 
  (key eng. msg.) OUTBOUND local= 209.165.202.129, remote= 209.165.200.225, 
    local_proxy= 209.165.202.129/0.0.0.0/0/0 (type=1), 
    remote_proxy= 209.165.200.225/0.0.0.0/0/0 (type=1), 
    protocol= ESP, transform= esp-3des esp-sha-hmac, 
    lifedur= 2147483647s and 0kb, 
    spi= 0x605A75D(101033821), conn_id= 2001, keysize= 0, flags= 0xC 
03:36:28: IPSEC(create_sa): sa created, 
  (sa) sa_dest= 209.165.202.129, sa_prot= 50, 
    sa_spi= 0x71DAE9C6(1910172102), 
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2000 
03:36:28: IPSEC(create_sa): sa created, 
  (sa) sa_dest= 209.165.200.225, sa_prot= 50, 
    sa_spi= 0x605A75D(101033821), 
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2001 
03:36:28: ISAKMP: received ke message (4/1) 
03:36:28: ISAKMP: Locking CONFIG struct 0x631B752C for 
crypto_ikmp_config_handle_kei_mess, count 2 
03:36:32: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 
03:36:32: CryptoEngine0: generate hmac context for conn id 1 
03:36:32: ISAKMP (0:1): processing HASH payload. message ID = 852253052 
03:36:32: ISAKMP (0:1): processing SA payload. message ID = 852253052 
03:36:32: ISAKMP (0:1): Checking IPSec proposal 1 
03:36:32: ISAKMP: transform 1, ESP_3DES 
03:36:32: ISAKMP:   attributes in transform: 
03:36:32: ISAKMP:      SA life type in seconds 
03:36:32: ISAKMP:      SA life duration (VPI) of  0x7F 0xFF 0xFF 0xFF 
03:36:32: ISAKMP:      encaps is 1 
03:36:32: ISAKMP:      authenticator is HMAC-SHA 
03:36:32: validate proposal 0 
03:36:32: ISAKMP (0:1): atts are acceptable. 
03:36:32: IPSEC(validate_proposal_request): proposal part #1, 
  (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, 
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), 
    remote_proxy= 10.48.66.0/255.255.254.0/0/0 (type=4), 
    protocol= ESP, transform= esp-3des esp-sha-hmac , 
    lifedur= 0s and 0kb, 
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 
03:36:32: validate proposal request 0 
03:36:32: ISAKMP (0:1): processing NONCE payload. message ID = 852253052 
03:36:32: ISAKMP (0:1): processing ID payload. message ID = 852253052 
03:36:32: ISAKMP (0:1): processing ID payload. message ID = 852253052 
03:36:32: ISAKMP (0:1): asking for 1 spis from ipsec 
03:36:32: ISAKMP (0:1): Node 852253052, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH 
Old State = IKE_QM_READY  New State = IKE_QM_SPI_STARVE 
03:36:32: IPSEC(key_engine): got a queue event... 
03:36:32: IPSEC(spi_response): getting spi 3997625134 for SA 
        from 209.165.202.129 to 209.165.200.225 for prot 3 
03:36:32: ISAKMP: received ke message (2/1) 
03:36:32: CryptoEngine0: generate hmac context for conn id 1 
03:36:32: ISAKMP (0:1): sending packet to 209.165.200.225 (R) QM_IDLE 
03:36:32: ISAKMP (0:1): Node 852253052, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY 
Old State = IKE_QM_SPI_STARVE  New State = IKE_QM_R_QM2 
03:36:32: ISAKMP (0:1): received packet from 209.165.200.225 (R) QM_IDLE 
03:36:32: CryptoEngine0: generate hmac context for conn id 1 
03:36:32: ipsec allocate flow 0 
03:36:32: ipsec allocate flow 0 
03:36:32: ISAKMP (0:1): Creating IPSec SAs 
03:36:32:         inbound SA from 209.165.200.225 to 209.165.202.129 
        (proxy 10.48.66.0 to 0.0.0.0) 
03:36:32:         has spi 0xEE46EB2E and conn_id 2002 and flags 4 
03:36:32:         lifetime of 2147483647 seconds 
03:36:32:         outbound SA from 209.165.202.129 to 209.165.200.225 
(proxy 0.0.0.0 to 10.48.66.0) 
03:36:32:         has spi 674305339 and conn_id 2003 and flags C 
03:36:32:         lifetime of 2147483647 seconds 
03:36:32: ISAKMP (0:1): deleting node 852253052 error FALSE reason "quick mode done (await()" 
03:36:32: ISAKMP (0:1): Node 852253052, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH 
Old State = IKE_QM_R_QM2  New State = IKE_QM_PHASE2_COMPLETE 
03:36:32: IPSEC(key_engine): got a queue event... 

!--- IPSec now initializes the SAs as these are !--- stored in the SA Database.
 
03:36:32: IPSEC(initialize_sas): , 
  (key eng. msg.) INBOUND local= 209.165.202.129, remote= 209.165.200.225, 

!--- This SA is for the actual data traffic between the !--- networks behind the VPN Client and the Cisco IOS router. 

    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), 
    remote_proxy= 10.48.66.0/255.255.254.0/0/0 (type=4), 
protocol= ESP, transform= esp-3des esp-sha-hmac , 
    lifedur= 2147483647s and 0kb, 
    spi= 0xEE46EB2E(3997625134), conn_id= 2002, keysize= 0, flags= 0x4 
03:36:32: IPSEC(initialize_sas): , 
  (key eng. msg.) OUTBOUND local= 209.165.202.129, remote= 209.165.200.225, 
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4), 
    remote_proxy= 10.48.66.0/255.255.254.0/0/0 (type=4), 
    protocol= ESP, transform= esp-3des esp-sha-hmac , 
    lifedur= 2147483647s and 0kb, 
    spi= 0x2831153B(674305339), conn_id= 2003, keysize= 0, flags= 0xC 
03:36:32: IPSEC(create_sa): sa created, 
  (sa) sa_dest= 209.165.202.129, sa_prot= 50, 
    sa_spi= 0xEE46EB2E(3997625134), 
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2002 
03:36:32: IPSEC(create_sa): sa created, 
  (sa) sa_dest= 209.165.200.225, sa_prot= 50, 
    sa_spi= 0x2831153B(674305339), 
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2003 
03:36:32: ISAKMP: received ke message (4/1) 
03:36:32: ISAKMP: Locking CONFIG struct 0x631B752C for 
 crypto_ikmp_config_handle_kei_mess, count 3

VPN 3002-Hardwareclient-Debugs

Wählen Sie in der VPN Client-GUI Configuration > System > Events > Classes aus, und aktivieren Sie IKE, IKEDBG, IPSEC und IPSECDBG auf Ebene 13 des SYSLOG-Protokolls. Denken Sie daran, die Debugs nach Abschluss des Tests zu deaktivieren.

VPN 3002-Hardwareclient-Debugs 
297 06/03/2002 11:02:30.100 SEV=7 IPSECDBG/14 RPT=3 

!--- The VPN Client attempts to connect to the headend. !--- In this case, it is Cisco IOS.
 
Sending KEY_ACQUIRE to IKE for src 209.165.200.225, dst 209.165.202.129 
298 06/03/2002 11:02:30.100 SEV=8 IKEDBG/0 RPT=108 
pitcher: received a key acquire message! 
299 06/03/2002 11:02:30.100 SEV=4 IKE/41 RPT=135 209.165.202.129 
IKE Initiator: New Phase 1, Intf 2, IKE Peer 209.165.202.129 
local Proxy Address 209.165.200.225, remote Proxy Address 209.165.202.129, 
SA (ESP-3DES-MD5) 
302 06/03/2002 11:02:30.100 SEV=9 IKEDBG/0 RPT=109 209.165.202.129 
constructing ISA_SA for isakmp 
303 06/03/2002 11:02:30.230 SEV=9 IKEDBG/0 RPT=110 209.165.202.129 
constructing ke payload 
304 06/03/2002 11:02:30.230 SEV=9 IKEDBG/1 RPT=30 209.165.202.129 
constructing nonce payload 
305 06/03/2002 11:02:30.230 SEV=9 IKEDBG/1 RPT=31 209.165.202.129 
constructing ID 
306 06/03/2002 11:02:30.230 SEV=9 IKEDBG/46 RPT=4 209.165.202.129 
constructing xauth V6 VID payload 
307 06/03/2002 11:02:30.230 SEV=9 IKEDBG/46 RPT=5 209.165.202.129 
constructing VID payload 
308 06/03/2002 11:02:30.230 SEV=9 IKEDBG/48 RPT=2 209.165.202.129 
Send Cisco Unity client VID 
309 06/03/2002 11:02:30.230 SEV=8 IKEDBG/0 RPT=111 209.165.202.129 
SENDING Message (msgid=0) with payloads : 
HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + VENDOR (13) + NONE ( 
0) ... total length : 541 
312 06/03/2002 11:02:30.520 SEV=8 IKEDBG/0 RPT=112 209.165.202.129 
RECEIVED Message (msgid=0) with payloads : 
HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + KE (4) + 
ID (5) + NONCE (10) + HASH (8) + NONE (0) ... total length : 348 
315 06/03/2002 11:02:30.530 SEV=8 IKEDBG/0 RPT=113 209.165.202.129 
RECEIVED Message (msgid=0) with payloads : 
HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + KE (4) + 
ID (5) + NONCE (10) + HASH (8) + NONE (0) ... total length : 348 
318 06/03/2002 11:02:30.530 SEV=9 IKEDBG/0 RPT=114 209.165.202.129 
processing SA payload 
319 06/03/2002 11:02:30.530 SEV=7 IKEDBG/0 RPT=115 209.165.202.129 
Oakley proposal is acceptable 
320 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=5 209.165.202.129 
processing VID payload 
321 06/03/2002 11:02:30.530 SEV=9 IKEDBG/49 RPT=4 209.165.202.129 
Received Cisco Unity client VID 
322 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=6 209.165.202.129 
processing VID payload 
323 06/03/2002 11:02:30.530 SEV=9 IKEDBG/49 RPT=5 209.165.202.129 
Received DPD VID 
324 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=7 209.165.202.129 
processing VID payload 
325 06/03/2002 11:02:30.530 SEV=9 IKEDBG/38 RPT=2 209.165.202.129 
Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 0000007f) 
326 06/03/2002 11:02:30.530 SEV=9 IKEDBG/47 RPT=8 209.165.202.129 
processing VID payload 
327 06/03/2002 11:02:30.530 SEV=9 IKEDBG/49 RPT=6 209.165.202.129 

!--- The VPN Client understands that it needs !--- to go through Extended authentication to !--- bring the tunnel up. 

Received xauth V6 VID 
328 06/03/2002 11:02:30.530 SEV=9 IKEDBG/0 RPT=116 209.165.202.129 
processing ke payload 
329 06/03/2002 11:02:30.530 SEV=9 IKEDBG/0 RPT=117 209.165.202.129 
processing ISA_KE 
330 06/03/2002 11:02:30.530 SEV=9 IKEDBG/1 RPT=32 209.165.202.129 
Processing ID 
331 06/03/2002 11:02:30.530 SEV=9 IKEDBG/1 RPT=33 209.165.202.129 
processing nonce payload 
332 06/03/2002 11:02:30.660 SEV=9 IKEDBG/0 RPT=118 209.165.202.129 
Generating keys for Initiator... 
333 06/03/2002 11:02:30.670 SEV=9 IKEDBG/0 RPT=119 209.165.202.129 
Group [209.165.202.129] 
processing hash 
334 06/03/2002 11:02:30.670 SEV=9 IKEDBG/0 RPT=120 209.165.202.129 
Group [209.165.202.129] 
computing hash 
335 06/03/2002 11:02:30.680 SEV=9 IKEDBG/0 RPT=121 
Group [209.165.202.129] 
construct hash payload 
336 06/03/2002 11:02:30.680 SEV=9 IKEDBG/0 RPT=122 209.165.202.129 
Group [209.165.202.129] 
computing hash 
337 06/03/2002 11:02:30.680 SEV=9 IKEDBG/46 RPT=6 209.165.202.129 
Group [209.165.202.129] 
constructing dpd vid payload 
338 06/03/2002 11:02:30.680 SEV=8 IKEDBG/0 RPT=123 209.165.202.129 
SENDING Message (msgid=0) with payloads : 
HDR + HASH (8) + NOTIFY (11) + VENDOR (13) + NONE (0) ... total length : 100 
340 06/03/2002 11:02:30.690 SEV=8 IKEDBG/0 RPT=124 209.165.202.129 
RECEIVED Message (msgid=71c8c9fd) with payloads : 
HDR + HASH (8) + NOTIFY (11) + NONE (0) ... total length : 92 
342 06/03/2002 11:02:30.690 SEV=9 IKEDBG/0 RPT=125 209.165.202.129 
Group [209.165.202.129] 
processing hash 
343 06/03/2002 11:02:30.690 SEV=9 IKEDBG/0 RPT=126 209.165.202.129 
Group [209.165.202.129] 
Processing Notify payload 
344 06/03/2002 11:02:30.690 SEV=5 IKE/73 RPT=19 209.165.202.129 
Group [209.165.202.129] 

!--- As IOS has a default IKE time of 1 day (86400) seconds !--- and forces the VPN Client to accept this value. !--- This is because Cisco IOS responds and the VPN Client initiates.
 
Responder forcing change of IKE rekeying duration from 2147483647 to 86400 seconds 
347 06/03/2002 11:02:30.690 SEV=6 IKE/0 RPT=2 
AM AM:843f96f6 received unexpected event EV_RESET_LIFETIME in state AM_RSND_LST_ 
MSG 
349 06/03/2002 11:02:30.700 SEV=8 IKEDBG/0 RPT=127 209.165.202.129 
RECEIVED Message (msgid=ecb5af46) with payloads : 
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 86 
351 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=34 
process_attr(): Enter! 
352 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=35 
Processing cfg Request attributes 
353 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=36 
Received Xauth Type in request! 
354 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=37 
Received Xauth Message! 
355 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=38 
Received Xauth Username request! 
356 06/03/2002 11:02:30.700 SEV=9 IKEDBG/1 RPT=39 
Received Xauth Password request! 
357 06/03/2002 11:02:30.700 SEV=9 IKEDBG/0 RPT=128 209.165.202.129 
Group [209.165.202.129] 
constructing blank hash 
358 06/03/2002 11:02:30.700 SEV=9 IKEDBG/0 RPT=129 209.165.202.129 
Group [209.165.202.129] 
constructing qm hash 
359 06/03/2002 11:02:30.700 SEV=8 IKEDBG/0 RPT=130 209.165.202.129 
SENDING Message (msgid=ecb5af46) with payloads : 
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 77 
361 06/03/2002 11:02:30.710 SEV=8 IKEDBG/0 RPT=131 209.165.202.129 
RECEIVED Message (msgid=ad808e58) with payloads : 
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 64 
363 06/03/2002 11:02:30.710 SEV=9 IKEDBG/1 RPT=40 
process_attr(): Enter! 
364 06/03/2002 11:02:30.710 SEV=9 IKEDBG/1 RPT=41 
Processing cfg Request attributes 
365 06/03/2002 11:02:30.710 SEV=9 IKEDBG/1 RPT=42 
Received Xauth Status Set! 
366 06/03/2002 11:02:30.710 SEV=9 IKEDBG/0 RPT=132 209.165.202.129 
Group [209.165.202.129] 
constructing blank hash 
367 06/03/2002 11:02:30.710 SEV=9 IKEDBG/0 RPT=133 209.165.202.129 
Group [209.165.202.129] 
constructing qm hash 
368 06/03/2002 11:02:30.710 SEV=8 IKEDBG/0 RPT=134 209.165.202.129 
SENDING Message (msgid=ad808e58) with payloads : 
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 60 
370 06/03/2002 11:02:30.720 SEV=9 IKEDBG/0 RPT=135 209.165.202.129 
Group [209.165.202.129] 
constructing blank hash 
371 06/03/2002 11:02:30.720 SEV=9 IKEDBG/0 RPT=136 209.165.202.129 
Group [209.165.202.129] 
constructing qm hash 
372 06/03/2002 11:02:30.720 SEV=8 IKEDBG/0 RPT=137 209.165.202.129 
SENDING Message (msgid=30ce63a8) with payloads : 
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 231 
374 06/03/2002 11:02:30.740 SEV=8 IKEDBG/0 RPT=138 209.165.202.129 
RECEIVED Message (msgid=30ce63a8) with payloads : 
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 313 
376 06/03/2002 11:02:30.740 SEV=9 IKEDBG/1 RPT=43 
process_attr(): Enter! 
377 06/03/2002 11:02:30.740 SEV=9 IKEDBG/1 RPT=44 
Processing MODE_CFG Reply attributes 

!--- The VPN Client processes the mode !--- configuration reply attributes sent by Cisco IOS.
 
378 06/03/2002 11:02:30.740 SEV=6 IKE/130 RPT=2 209.165.202.129 
Group [209.165.202.129] 
Received unsupported transaction mode attribute: 7 
379 06/03/2002 11:02:30.740 SEV=5 IKE/115 RPT=7 209.165.202.129 
Group [209.165.202.129] 
Client rejected NAT enabled IPSec request, 
 falling back to standard IPSec 
381 06/03/2002 11:02:30.740 SEV=3 AUTH/24 RPT=7 
Tunnel to headend device 209.165.202.129 connected 
382 06/03/2002 11:02:30.740 SEV=9 IKEDBG/0 RPT=139 209.165.202.129 
Group [209.165.202.129] 
Oakley begin quick mode 
383 06/03/2002 11:02:30.740 SEV=4 IKE/119 RPT=7 209.165.202.129 
Group [209.165.202.129] 

!--- Phase 1 is complete. 

  
384 06/03/2002 11:02:30.740 SEV=6 IKE/121 RPT=2 209.165.202.129 
Keep-alive type for this connection: DPD 
385 06/03/2002 11:02:30.740 SEV=7 IKEDBG/0 RPT=140 209.165.202.129 
Group [209.165.202.129] 
Starting phase 1 rekey timer: 73440000 (ms) 
386 06/03/2002 11:02:30.740 SEV=9 IPSECDBG/6 RPT=15 
IPSEC key message parse - msgtype 6, len 200, vers 1, pid 00000000, seq 13, err 
0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0, hashKey 
Len 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 662488, lifetime2 0, dsI 
d 300 
390 06/03/2002 11:02:30.740 SEV=9 IPSECDBG/1 RPT=47 
Processing KEY_GETSPI msg! 
391 06/03/2002 11:02:30.740 SEV=7 IPSECDBG/13 RPT=3 
Reserved SPI 1608220759 
392 06/03/2002 11:02:30.740 SEV=8 IKEDBG/6 RPT=3 
IKE got SPI from key engine: SPI = 0x5fdb8057 
393 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=141 209.165.202.129 
Group [209.165.202.129] 
oakley constucting quick mode 
394 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=142 209.165.202.129 
Group [209.165.202.129] 
constructing blank hash 
395 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=143 209.165.202.129 
Group [209.165.202.129] 
constructing ISA_SA for ipsec 
396 06/03/2002 11:02:30.750 SEV=9 IKEDBG/1 RPT=45 209.165.202.129 
Group [209.165.202.129] 
constructing ipsec nonce payload 
397 06/03/2002 11:02:30.750 SEV=9 IKEDBG/1 RPT=46 209.165.202.129 
Group [209.165.202.129] 
constructing proxy ID 
398 06/03/2002 11:02:30.750 SEV=7 IKEDBG/0 RPT=144 209.165.202.129 
Group [209.165.202.129] 
Transmitting Proxy Id: 

!--- This is the SA for management between !--- the VPN Client and Cisco IOS.
 
  Local host:  209.165.200.225  Protocol 0  Port 0 
  Remote host: 209.165.202.129  Protocol 0  Port 0 
402 06/03/2002 11:02:30.750 SEV=9 IKEDBG/0 RPT=145 209.165.202.129 
Group [209.165.202.129] 
constructing qm hash 
403 06/03/2002 11:02:30.750 SEV=8 IKEDBG/0 RPT=146 209.165.202.129 
SENDING Message (msgid=e429a70e) with payloads : 
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) ... total leng 
th : 292 
406 06/03/2002 11:02:31.010 SEV=8 IKEDBG/0 RPT=147 209.165.202.129 
RECEIVED Message (msgid=e429a70e) with payloads : 
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0) 
... total length : 192 
409 06/03/2002 11:02:31.010 SEV=9 IKEDBG/0 RPT=148 209.165.202.129 
Group [209.165.202.129] 
processing hash 
410 06/03/2002 11:02:31.010 SEV=9 IKEDBG/0 RPT=149 209.165.202.129 
Group [209.165.202.129] 
processing SA payload 
411 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=47 209.165.202.129 
Group [209.165.202.129] 
processing nonce payload 
412 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=48 209.165.202.129 
Group [209.165.202.129] 
Processing ID 
413 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=49 209.165.202.129 
Group [209.165.202.129] 
Processing ID 
414 06/03/2002 11:02:31.020 SEV=9 IKEDBG/0 RPT=150 209.165.202.129 
Group [209.165.202.129] 
Processing Notify payload 
415 06/03/2002 11:02:31.020 SEV=5 IKE/73 RPT=20 209.165.202.129 
Group [209.165.202.129] 
Responder forcing change of IPSec rekeying duration from 2147483647 to 3600 seco 
nds 
418 06/03/2002 11:02:31.020 SEV=9 IKEDBG/0 RPT=151 209.165.202.129 
Group [209.165.202.129] 
loading all IPSEC SAs 
419 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=50 209.165.202.129 
Group [209.165.202.129] 
Generating Quick Mode Key! 
420 06/03/2002 11:02:31.020 SEV=9 IKEDBG/1 RPT=51 209.165.202.129 
Group [209.165.202.129] 
Generating Quick Mode Key! 
421 06/03/2002 11:02:31.020 SEV=7 IKEDBG/0 RPT=152 209.165.202.129 
Group [209.165.202.129] 
Loading host: 
  Dst: 209.165.202.129 
  Src: 209.165.200.225 
423 06/03/2002 11:02:31.020 SEV=4 IKE/49 RPT=13 209.165.202.129 
Group [209.165.202.129] 
Security negotiation complete for peer (209.165.202.129) 
Initiator, Inbound SPI = 0x5fdb8057, Outbound SPI = 0xa088f2dc 
426 06/03/2002 11:02:31.020 SEV=9 IKEDBG/0 RPT=153 209.165.202.129 
Group [209.165.202.129] 
oakley constructing final quick mode 
427 06/03/2002 11:02:31.030 SEV=8 IKEDBG/0 RPT=154 209.165.202.129 
SENDING Message (msgid=e429a70e) with payloads : 
HDR + HASH (8) + NONE (0) ... total length : 76 
429 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/6 RPT=16 
IPSEC key message parse - msgtype 1, len 612, vers 1, pid 00000000, seq 0, err 0 
, type 2, mode 1, state 64, label 0, pad 0, spi a088f2dc, encrKeyLen 24, hashKey 
Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds 
Id -378167296 
433 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=48 
Processing KEY_ADD msg! 
434 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=49 
key_msghdr2secassoc(): Enter 
435 06/03/2002 11:02:31.030 SEV=7 IPSECDBG/1 RPT=50 
No USER filter configured 
436 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=51 
KeyProcessAdd: Enter 
437 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=52 
KeyProcessAdd: Adding outbound SA 
438 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=53 
KeyProcessAdd: src 209.165.200.225 mask 0.0.0.0, dst 209.165.202.129 mask 0.0.0. 
0 
440 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=54 
KeyProcessAdd: FilterIpsecAddIkeSa success 
441 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/6 RPT=17 
IPSEC key message parse - msgtype 3, len 332, vers 1, pid 00000000, seq 0, err 0 
, type 2, mode 1, state 32, label 0, pad 0, spi 5fdb8057, encrKeyLen 24, hashKey 
Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds 
Id -378167296 
445 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=55 
Processing KEY_UPDATE msg! 
446 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=56 
Update inbound SA addresses 
447 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=57 
key_msghdr2secassoc(): Enter 
448 06/03/2002 11:02:31.030 SEV=7 IPSECDBG/1 RPT=58 
No USER filter configured 
449 06/03/2002 11:02:31.030 SEV=9 IPSECDBG/1 RPT=59 
KeyProcessUpdate: Enter 
450 06/03/2002 11:02:31.030 SEV=8 IPSECDBG/1 RPT=60 
KeyProcessUpdate: success 
451 06/03/2002 11:02:31.030 SEV=8 IKEDBG/7 RPT=3 
IKE got a KEY_ADD msg for SA: SPI = 0xa088f2dc 
452 06/03/2002 11:02:31.030 SEV=8 IKEDBG/0 RPT=155 
pitcher: rcv KEY_UPDATE, spi 0x5fdb8057 
453 06/03/2002 11:02:31.040 SEV=4 IKE/120 RPT=13 209.165.202.129 
Group [209.165.202.129] 
PHASE 2 COMPLETED (msgid=e429a70e) 

!--- This line indicates that SA establishment !--- for management between the VPN Client and Cisco IOS is complete.
 
454 06/03/2002 11:02:35.040 SEV=7 IPSECDBG/10 RPT=4 
IPSEC ipsec_output() can call key_acquire() because 4 seconds have elapsed since 
 last IKE negotiation began (src 0x0a3042b9, dst 0x00a66e24) 
456 06/03/2002 11:02:35.040 SEV=7 IPSECDBG/14 RPT=4 
Sending KEY_ACQUIRE to IKE for src 10.48.66.185, dst 0.0.0.0 
457 06/03/2002 11:02:35.040 SEV=8 IKEDBG/0 RPT=156 
pitcher: received a key acquire message! 
458 06/03/2002 11:02:35.040 SEV=4 IKE/41 RPT=136 
IKE Initiator: New Phase 2, Intf 2, IKE Peer 209.165.202.129 
local Proxy Address 10.48.66.0, remote Proxy Address 0.0.0.0, 
SA (ESP-3DES-MD5) 
460 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=157 209.165.202.129 
Group [209.165.202.129] 
Oakley begin quick mode 
461 06/03/2002 11:02:35.040 SEV=9 IPSECDBG/6 RPT=18 
IPSEC key message parse - msgtype 6, len 200, vers 1, pid 00000000, seq 14, err 
0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0, hashKey 
Len 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 662488, lifetime2 0, dsI 
d 300 
465 06/03/2002 11:02:35.040 SEV=9 IPSECDBG/1 RPT=61 
Processing KEY_GETSPI msg! 
466 06/03/2002 11:02:35.040 SEV=7 IPSECDBG/13 RPT=4 
Reserved SPI 1819592269 
467 06/03/2002 11:02:35.040 SEV=8 IKEDBG/6 RPT=4 
IKE got SPI from key engine: SPI = 0x6c74c64d 
468 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=158 209.165.202.129 
Group [209.165.202.129] 
oakley constucting quick mode 
469 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=159 209.165.202.129 
Group [209.165.202.129] 
constructing blank hash 
470 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=160 209.165.202.129 
Group [209.165.202.129] 
constructing ISA_SA for ipsec 
471 06/03/2002 11:02:35.040 SEV=9 IKEDBG/1 RPT=52 209.165.202.129 
Group [209.165.202.129] 
constructing ipsec nonce payload 
472 06/03/2002 11:02:35.040 SEV=9 IKEDBG/1 RPT=53 209.165.202.129 
Group [209.165.202.129] 
constructing proxy ID 
473 06/03/2002 11:02:35.040 SEV=7 IKEDBG/0 RPT=161 209.165.202.129 
Group [209.165.202.129] 
Transmitting Proxy Id: 
  Local subnet:  10.48.66.0  mask 255.255.254.0 Protocol 0  Port 0 
  Remote subnet: 0.0.0.0  Mask 0.0.0.0 Protocol 0  Port 0 

!--- This line indicates the SA for the traffic between !--- the networks behind the VPN Client and Cisco IOS.
 
477 06/03/2002 11:02:35.040 SEV=9 IKEDBG/0 RPT=162 209.165.202.129 
Group [209.165.202.129] 
constructing qm hash 
478 06/03/2002 11:02:35.040 SEV=8 IKEDBG/0 RPT=163 209.165.202.129 
SENDING Message (msgid=a809c6b4) with payloads : 
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) ... total leng 
th : 300 
481 06/03/2002 11:02:35.310 SEV=8 IKEDBG/0 RPT=164 209.165.202.129 
RECEIVED Message (msgid=a809c6b4) with payloads : 
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0) 
... total length : 200 
484 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=165 209.165.202.129 
Group [209.165.202.129] 
processing hash 
485 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=166 209.165.202.129 
Group [209.165.202.129] 
processing SA payload 
486 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=54 209.165.202.129 
Group [209.165.202.129] 
processing nonce payload 
487 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=55 209.165.202.129 
Group [209.165.202.129] 
Processing ID 
488 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=56 209.165.202.129 
Group [209.165.202.129] 
Processing ID 
489 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=167 209.165.202.129 
Group [209.165.202.129] 
Processing Notify payload 
490 06/03/2002 11:02:35.310 SEV=5 IKE/73 RPT=21 209.165.202.129 
Group [209.165.202.129] 
Responder forcing change of IPSec rekeying duration from 2147483647 to 3600 seco 
nds 
493 06/03/2002 11:02:35.310 SEV=9 IKEDBG/0 RPT=168 209.165.202.129 
Group [209.165.202.129] 
loading all IPSEC SAs 
494 06/03/2002 11:02:35.310 SEV=9 IKEDBG/1 RPT=57 209.165.202.129 
Group [209.165.202.129] 
Generating Quick Mode Key! 
495 06/03/2002 11:02:35.320 SEV=9 IKEDBG/1 RPT=58 209.165.202.129 
Group [209.165.202.129] 
Generating Quick Mode Key! 
496 06/03/2002 11:02:35.320 SEV=7 IKEDBG/0 RPT=169 209.165.202.129 
Group [209.165.202.129] 
Loading subnet: 
  Dst: 0.0.0.0  mask: 0.0.0.0 
  Src: 10.48.66.0  mask: 255.255.254.0 
499 06/03/2002 11:02:35.320 SEV=4 IKE/49 RPT=14 209.165.202.129 
Group [209.165.202.129] 
Security negotiation complete for peer (209.165.202.129) 
Initiator, Inbound SPI = 0x6c74c64d, Outbound SPI = 0x8e34d356 
502 06/03/2002 11:02:35.320 SEV=9 IKEDBG/0 RPT=170 209.165.202.129 
Group [209.165.202.129] 
oakley constructing final quick mode 
503 06/03/2002 11:02:35.320 SEV=8 IKEDBG/0 RPT=171 209.165.202.129 
SENDING Message (msgid=a809c6b4) with payloads : 
HDR + HASH (8) + NONE (0) ... total length : 76 
505 06/03/2002 11:02:35.320 SEV=9 IPSECDBG/6 RPT=19 
IPSEC key message parse - msgtype 1, len 612, vers 1, pid 00000000, seq 0, err 0 
, type 2, mode 1, state 64, label 0, pad 0, spi 8e34d356, encrKeyLen 24, hashKey 
Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds 
Id -378167296 
509 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=62 
Processing KEY_ADD msg! 
510 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=63 
key_msghdr2secassoc(): Enter 
511 06/03/2002 11:02:35.330 SEV=7 IPSECDBG/1 RPT=64 
No USER filter configured 
512 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=65 
KeyProcessAdd: Enter 
513 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=66 
KeyProcessAdd: Adding outbound SA 
514 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=67 
KeyProcessAdd: src 10.48.66.0 mask 0.0.1.255, dst 0.0.0.0 mask 255.255.255.255 
515 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=68 
KeyProcessAdd: FilterIpsecAddIkeSa success 
516 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/6 RPT=20 
IPSEC key message parse - msgtype 3, len 332, vers 1, pid 00000000, seq 0, err 0 
, type 2, mode 1, state 32, label 0, pad 0, spi 6c74c64d, encrKeyLen 24, hashKey 
Len 20, ivlen 8, alg 2, hmacAlg 4, lifetype 0, lifetime1 662488, lifetime2 0, ds 
Id -378167296 
520 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=69 
Processing KEY_UPDATE msg! 
521 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=70 
Update inbound SA addresses 
522 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=71 
key_msghdr2secassoc(): Enter 
523 06/03/2002 11:02:35.330 SEV=7 IPSECDBG/1 RPT=72 
No USER filter configured 
524 06/03/2002 11:02:35.330 SEV=9 IPSECDBG/1 RPT=73 
KeyProcessUpdate: Enter 
525 06/03/2002 11:02:35.330 SEV=8 IPSECDBG/1 RPT=74 
KeyProcessUpdate: success 
526 06/03/2002 11:02:35.330 SEV=8 IKEDBG/7 RPT=4 
IKE got a KEY_ADD msg for SA: SPI = 0x8e34d356 
527 06/03/2002 11:02:35.330 SEV=8 IKEDBG/0 RPT=172 
pitcher: rcv KEY_UPDATE, spi 0x6c74c64d 
528 06/03/2002 11:02:35.330 SEV=4 IKE/120 RPT=14 209.165.202.129 
Group [209.165.202.129] 
PHASE 2 COMPLETED (msgid=a809c6b4) 

!--- This line indicates that SA establishment !--- for networks between the VPN Client and Cisco IOS is complete.

Zugehörige Informationen

Revisionsverlauf

Überarbeitung Veröffentlichungsdatum Kommentare
1.0
03-Jun-2002
Erstveröffentlichung

War dieses Dokument hilfreich?

FeedbackFeedback

Cisco kontaktieren