Inhalt

Einführung

Voraussetzungen

Anforderungen

Verwendete Komponenten

Konventionen

Konfiguration

VoIP-Befehle

Anzeige der Sprachport-Zusammenfassung

Zusammenfassung der Sprachanrufe anzeigen

Anzeige der DFÜ-Peer-Sprachübersicht

Anzeige der aktiven Sprachnachrichten

Sprach-DSP anzeigen

Anhang

Zugehörige Informationen

Einführung

In diesem Dokument werden die entsprechenden MIB-Objekte behandelt, die die in verschiedenen VoIP-Verifizierungsbefehlen (Voice over IP) enthaltenen Informationen bereitstellen. NMS-Anwendungen und/oder -Skripts können diese Informationen möglicherweise verwenden.

Voraussetzungen

Anforderungen

Für dieses Dokument bestehen keine speziellen Anforderungen.

Verwendete Komponenten

Dieses Dokument ist nicht auf bestimmte Softwareversionen beschränkt. Es wurde jedoch speziell für einen Cisco Router der Serie 3600 mit einer NM-2V-Karte geschrieben.

Die Informationen in diesem Dokument wurden von den Geräten in einer bestimmten Laborumgebung erstellt. Alle in diesem Dokument verwendeten Geräte haben mit einer leeren (Standard-)Konfiguration begonnen. Wenn Ihr Netzwerk in Betrieb ist, stellen Sie sicher, dass Sie die potenziellen Auswirkungen eines Befehls verstehen.

Konventionen

Weitere Informationen zu Dokumentkonventionen finden Sie in den Cisco Technical Tips Conventions.

Konfiguration

Diese Ausgabe zeigt einen relevanten Teil der Konfiguration, die in diesem Dokument verwendet wird:

VoipRouter#show running-configuration

Building configuration...

Current configuration : 5412 bytes

!

version 12.3

...

!

snmp-server community public RO

!

...

!

voice-port 2/0/0

!

...

!

dial-peer voice 2000 pots

destination-pattern 2000

port 2/0/0

!

dial-peer voice 1000 voip

destination-pattern 1000

session target ipv4:172.16.99.22

!

...

end

VoIP-Befehle

In diesen Abschnitten werden die MIB-Objekte angezeigt, die der Ausgabe dieser VoIP-Verifizierungsbefehle entsprechen:

- Sprachport-Zusammenfassung anzeigen (nur für NM-2V-Karte)

- Zusammenfassung der Sprachanrufe anzeigen

- Anzeige der DFÜ-Peer-Sprachübersicht

- Anzeige der Aktiv-Sprachübersicht für Anrufe (nur für Cisco 3600-Plattform)

- Sprach-DSP anzeigen (nur für NM-HDV-Karte)

Die Informationen, die diese VoIP-Verifizierungsbefehle enthalten, können aus IF-MIB, CISCO-VOICE-IF-MIB, CISCO-VOICE-ANALOG-IF-MIB, CISCO-VOICE-DIAL-CONTROL-MIB, DIAL-CONTROL-MIB und CISCO extrahiert werden. DSP-MGMT-MIB.

Hinweis: In diesen Beispielen wird der Telefoniestück mit 1102799 indiziert, und der H.323-Bein wird mit 1102966 indiziert.

Anzeige der Sprachport-Zusammenfassung

Hinweis: Der fettgedruckte Text im Befehl show voice port summary ist im Abschnitt Equivalent MIB Objects (Entsprechende MIB-Objekte) aufgeführt.

VoipRouter#show voice port summary

IN           OUT

PORT      CH   SIG-TYPE   ADMIN OPER  STATUS       STATUS   EC

========= == ============ ===== ====  ========     ======== ==

2/0/0(A1) --  fxs-ls(A2)  up(A3)up(A4) off-hook(A5) idle     y(A6)

2/0/1     --  fxs-ls      up    dorm   on-hook      idle     y

Entsprechende MIB-Objekte

A1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

A2  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)

A3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

A4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

A5  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)

A6  —  CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)

Hinweis: No MIB Object behält den Wert im CH-Bereich des Befehls show voice port summary bei Verwendung der NM-2V Card bei.

Zusammenfassung der Sprachanrufe anzeigen

Hinweis: Der fettgedruckte Text im Befehl show voice call summary ist im Abschnitt Equivalent MIB Objects (Entsprechende MIB-Objekte) aufgeführt.

VoipRouter#show voice call summary

PORT         CODEC      VAD   VTSP STATE            VPM STATE

============ ========   ===   ==================== ======================

2/0/0(B1)    g729r8(B2) y(B3) S_CONNECT             FXSLS_CONNECT

2/0/1         -         -       -                   FXSLS_ONHOOK

Entsprechende MIB-Objekte

B1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

B2  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.

1102966.1 = INTEGER: ietfg729r8000(25)

B3  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.

1102966.1 = INTEGER: true(1)

Hinweis: Kein MIB-Objekt verwaltet den VTSP-Status (Voice Telefony Service Provider) und den VPM-Status einzeln. Verwenden Sie stattdessen callActiveCallState aus DIAL-CONTROL-MIB.

Anzeige der DFÜ-Peer-Sprachübersicht

Hinweis: Der fettgedruckte Text im Befehl show dial-peer voice summary ist im Abschnitt Equivalent MIB Objects (Entsprechende MIB-Objekte) aufgeführt.

VoipRouter#show dial-peer voice summary

dial-peer hunt 0

AD                                        PRE  PASS

TAG      TYPE     MIN     OPER    PREFIX DEST-PATTERN  FER  THRU SESS-TARGET   PORT

2000(C1) pots(C2)  up(C3)  up(C4) 9(C5)   2000(C6)     0(C7)                2/0/0(C8)

1000     voip      up      up             1000         0    syst ipv4:172.16.99.22(C9)

Entsprechende MIB-Objekte

C1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90

—  DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37

C2  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)

C3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

C4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

C5  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9

C6  —  DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000

C7  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0

C8  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

C9  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 =

STRING: ipv4:172.16.99.22

Hinweis: No MIB Object behält den im PASS THRU-Methodenabschnitt des Befehls show dial-peer summary enthaltenen Wert bei.

Anzeige der aktiven Sprachnachrichten

Hinweis: Der fettgedruckte Text im Befehl show call active voice brief wird im Abschnitt Equivalent MIB Objects (Entsprechende MIB-Objekte) erläutert.

VoIPRouter#show call active voice brief

<ID>:<start>hs.<index> +<connect> pid:<peer_id> <dir> <addr> <state>

dur hh:mm:ss tx:<packets>/<bytes> rx:<packets>/<bytes>

IP <ip>:<udp> rtt:<time>ms pl:<play>/<gap>ms lost:<lost>/<early>/<late>

delay:<last>/<min>/<max>ms <codec>

MODEMPASS <method> buf:<fills>/<drains> loss <overall%>

<multipkt>/<corrected>

last <buf event time>s dur:<Min>/<Max>s

FR <protocol> [int dlci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>

sig:<on/off> <codec> (payload size)

ATM <protocol> [int vpi/vci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>

sig:<on/off> <codec> (payload size)

Tele <int>:tx:<tot>/<v>/<fax>ms <codec> noise:<l> acom:<l> i/o:<l>/<l>

dBm

MODEMRELAY info:<rcvd>/<sent>/<resent> xid:<rcvd>/<sent>

total:<rcvd>/<sent>/<drops>

Proxy <ip>:<audio udp>,<video udp>,<tcp0>,<tcp1>,<tcp2>,<tcp3> endpt:

<type>/<manf>

bw:<req>/<act> codec:<audio>/<video>

tx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120

pkts>/<t120 bytes>

rx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120

pkts>/<t120 bytes>

Telephony call-legs: 1

SIP call-legs: 0

H323 call-legs: 1

MGCP call-legs: 0

Total call-legs: 2

11D9 : 1102799(D1)hs.1 +1324 pid:2000(D2) Answer(D3) 2000(D4) active(D5)

dur 1d19h(D6) tx:7875641(D7)/157512782(D8) rx:7875955(D9)/157519081(D10)

Tele 2/0/0(D11):1: tx:157515460(D12)/157514630(D13)/0ms g729r8(D14)

noise:-56(D15) acom:5(D16)  i/0:-40(D17)/-46(D18) dBm

11D9 : 1102966hs.1 +1157 pid:1000 Originate 1000 active

dur 1d19h tx:7875388/157507741 rx:7875641/157512782

IP 172.16.99.22(D19):19066(D20) rtt:6ms(D21) pl:157496940(D22)/4770ms(D23)

lost:52(D24)/1(D25)/325(D26) delay:67(D27)/55(D28)/132ms(D29) g729r8

Telephony call-legs: 1

SIP call-legs: 0

H323 call-legs: 1

MGCP call-legs: 0

Total call-legs: 2

Entsprechende MIB-Objekte

D1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1

= Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

D2  —  DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000

D3  —  DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)

D4  —  DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000

D5  —  DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)

D6  —  DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks:

(1104123) 3:04:01.23

—  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (16590203) 1 days,

22:05:02.03

D7  —  DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641

D8  —  DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782

D9  —  DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955

D10 —  DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081

D11 —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

D12 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.

1102799.1 = Gauge32: 157515460 milliseconds

D13 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.

1102799.1 = Gauge32: 157514630 milliseconds

D14 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.

1102799.1 = INTEGER: ietfg729r8000(25)

D15 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.

1102799.1 = INTEGER: -56 dBm

D16 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.

1102799.1 =  INTEGER: 5 dB

D17 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.

1102799.1 = INTEGER: -40 dBm

D18 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.

1102799.1 = INTEGER: -46 dBm

D19 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.

1102966.1 = IpAddress: 172.16.99.22

D20 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.

1102966.1 = INTEGER: 19066

D21 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.

1102966.1 = Gauge32: 6 milliseconds

D22 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.

1102966.1 = Gauge32: 157496940 milliseconds

D23 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.

1102966.1 = Gauge32: 1090 milliseconds

—  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.

1102966.1 = Gauge32: 3680 milliseconds

—  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.

1102966.1 = Gauge32: 0 milliseconds

D24 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.

1102966.1 = Gauge32: 52 packets

D25 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.

1102966.1 = Gauge32: 1 packets

D26 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.

1102966.1 = Gauge32: 325 packets

D27 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.

1102966.1 = Gauge32: 67

D28 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.

1102966.1 = Gauge32: 55 milliseconds

D29 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.

1102966.1 = Gauge32: 132 milliseconds

Hinweis: Der GapFill-Wert des Befehls show call active voice brief wird beim Hinzufügen der SNMP-Objekte cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapWithPrediction und cvVoIPCallActiveGapFill abgerufen Mit Interpolation.

Sprach-DSP anzeigen

VoIPRouter#show voice dsp

DSP  DSP             DSPWARE CURR  BOOT                         PAK     TX/RX

TYPE NUM CH CODEC    VERSION STATE STATE   RST AI VOICEPORT TS ABORT  PACK COUNT

==== === == ======== ======= ===== ======= === == ========= == ===== ============

C549 009 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     05     0         0/36

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     06     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     07     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     08     0          0/0

C549 010 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     09     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     10     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     11     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     12     0          0/0

C549 011 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     13     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     14     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     15     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     16     0          0/0

C549 012 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     17     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     18     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     19     0          0/0

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     20     0          0/0

C549 013 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     21     0          0/0

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     22     0          0/0

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     23     0         0/12

04 g729r8    4.1.31 busy  idle         0 1/0:0     24     0    176/56702

C549 014 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     01     0         0/27

02 {medium}  4.1.31 IDLE  idle         0 1/0:0     02     0         0/12

03 {medium}  4.1.31 IDLE  idle         0 1/0:0     03     0         0/12

04 {medium}  4.1.31 IDLE  idle         0 1/0:0     04     0         0/12

Im Folgenden sind einige nützliche MIB-Objekte aufgeführt, die Informationen über den aktiven Anruf in der Beispielausgabe des Befehls show voice dsp bereitstellen:

CISCO-DSP-MGMT-MIB::cdspCardIndex.7 = INTEGER: 2

OLD-CISCO-CHASSIS-MIB::cardType.2 = INTEGER: hdv(516)

OLD-CISCO-CHASSIS-MIB::cardDescr.2 = STRING: "High Density Voice"

ENTITY-MIB::entPhysicalDescr.7 = STRING: High Density Voice

ENTITY-MIB::entPhysicalDescr.22 = STRING: DSP (C549)

CISCO-DSP-MGMT-MIB::cdspCardState.7 = INTEGER: normal(1)

CISCO-DSP-MGMT-MIB::cdspCardMaxChanPerDSP.7 = Gauge32: 4 channels

CISCO-DSP-MGMT-MIB::cdspTotalChannels.22 = Gauge32: 4 channels

CISCO-DSP-MGMT-MIB::cdspActiveChannels.21 = Gauge32: 1 channels

Hinweis: Die MIB mit den Informationen zum Anzeigen von Sprach-DSP ist CISCO-DSP-MGMT-MIB. Aufgrund der Cisco Bug-ID CSCeb62542 für die NM-2V-Karte werden DSPs auf NM-2V jedoch nicht in ENTITY-MIB angezeigt. Da cdspCardStatusTable vom entPhysicalIndex der ENTITY-MIB abhängt, wird cdspCardStatusTable für die NM-2V-Karte nicht ausgefüllt.

Anhang

Diese Ausgabe zeigt den vollständigen Snapshot von ciscoVoiceAnalogIfMIB aus CISCO-VOICE-ANALOG-IF-MIB zum Zeitpunkt der in diesem Dokument gezeigten VoIP-Verifizierungsbefehle:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-ANALOG-IF-MIB:ciscoVoiceAnalogIfMIB

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.37 = INTEGER: ohms600Real(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.38 = INTEGER: ohms600Real(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.37 = INTEGER: voice(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.38 = INTEGER: none(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.37 = INTEGER: none(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.38 = INTEGER: none(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.37 = Counter32: 0

CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.38 = Counter32: 0

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.38 = INTEGER: fxsLoopStart(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.37 = INTEGER: ringFrequency25(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.38 = INTEGER: ringFrequency25(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.38 = INTEGER: onHook(1)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.37 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.38 = INTEGER: false(2)

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.37 =

INTEGER: 100 milliseconds

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.38 =

INTEGER: 100 milliseconds

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.37 =

INTEGER: 100 milliseconds

CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.38 =

INTEGER: 100 milliseconds

Diese Ausgabe zeigt den vollständigen Snapwalk von ciscoVoiceInterfaceMIB von CISCO-VOICE-IF-MIB zum Zeitpunkt der in diesem Dokument gezeigten VoIP-Verifizierungsbefehle:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-IF-MIB:ciscoVoiceInterfaceMIB

CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.37 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.38 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.37 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.38 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.37 = INTEGER: -38 dBm

CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.38 = INTEGER: -38 dBm

CISCO-VOICE-IF-MIB::cvIfCfgInGain.37 = INTEGER: 0 dB

CISCO-VOICE-IF-MIB::cvIfCfgInGain.38 = INTEGER: 0 dB

CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.37 = INTEGER: 3 dB

CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.38 = INTEGER: 3 dB

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.38 = INTEGER: true(1)

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.37 = INTEGER: 4

CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.38 = INTEGER: 4

CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.37 = INTEGER: normal(1)

CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.38 = INTEGER: normal(1)

CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.37 = STRING:

CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.38 = STRING:

CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.37 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.38 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.37 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.38 = INTEGER: 10 seconds

CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.37 = STRING: "US"

CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.38 = STRING: "US"

CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.37 = INTEGER: 1

CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.38 = INTEGER: 1

CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.37 = INTEGER: 1

CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.38 = INTEGER: 1

Diese Ausgabe zeigt den vollständigen Snapshot der CiscoVoiceDialControlMIB von CISCO-VOICE-DIAL-CONTROL-MIB zum Zeitpunkt der in diesem Dokument gezeigten VoIP-Verifizierungsbefehle:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-DIAL-CONTROL-MIB:ciscoVoiceDialControlMIB

CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralPoorQoVNotificationEnable.0 = INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.1000 = INTEGER: 91

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.1000 = INTEGER: voip(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.1000 = INTEGER: active(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.2000 = INTEGER: active(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.1000 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.2000 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgSessionTarget.90 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDIDCallEnable.90 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgCasGroup.90 = INTEGER: -1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgRegisterE164.90 = INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgForwardDigits.90 = INTEGER: -1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEntry.7.90 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionProtocol.91 = INTEGER: cisco(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDesiredQoS.91 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMinAcceptableQoS.91 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 =

STRING: ipv4:172.16.99.22

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderRate.91 =

INTEGER: g729IETFr8000(16)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxRate.91 = INTEGER: voiceRate(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgVADEnable.91 = INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgExpectFactor.91 =

INTEGER: 0 equipment impairment factor (eif)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIcpif.91 =

INTEGER: 20 equipment impairment factor (eif)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable.91 =

INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgUDPChecksumEnable.91 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIPPrecedence.91 = INTEGER: 0

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgTechPrefix.91 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDigitRelay.91 = Hex-STRING: 00

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderBytes.91 = INTEGER: 20 bytes

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxBytes.91 = INTEGER: 20 bytes

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgInBandSignaling.91 = INTEGER: cas(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgEntry.23.91 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.90 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.91 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.90 =

INTEGER: -1 connections

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.91 =

INTEGER: -1 connections

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.90 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.91 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.91 = INTEGER: 0

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.90 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.91 = INTEGER: false(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.90 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.91 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1 =

Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.1102799.1 =

Gauge32: 157515460 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.1102799.1 =

Gauge32: 157514630 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveFaxTxDuration.1102799.1 =

Gauge32: 0 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.1102799.1 =

INTEGER: ietfg729r8000(25)

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.1102799.1 = INTEGER: -56 dBm

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.1102799.1 = INTEGER: 5 dB

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.1102799.1 =

INTEGER: -46 dBm

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.1102799.1 =

INTEGER: -40 dBm

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveERLLevel.1102799.1 = INTEGER: 5 dB

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveSessionTarget.1102799.1 = STRING:

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveImgPageCount.1102799.1 = Gauge32: 0 pages

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.13.1102799.1 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.14.1102799.1 = INTEGER: 2

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.15.1102799.1 = INTEGER: 19971

CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.17.1102799.1 = INTEGER: 5

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveConnectionId.1102966.1 =

Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.1102966.1 =

IpAddress: 172.16.99.22

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.1102966.1 =

INTEGER: 19066

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.1102966.1 =

Gauge32: 6 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSelectedQoS.1102966.1 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionProtocol.1102966.1 =

INTEGER: cisco(2)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionTarget.1102966.1 =

STRING: ipv4:172.16.99.22

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.1102966.1 =

Gauge32: 157496940 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.1102966.1 =

Gauge32: 1090 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.1102966.1 =

Gauge32: 3680 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.1102966.1 =

Gauge32: 0 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithRedundancy.1102966.1 =

Gauge32: 0 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.1102966.1 =

Gauge32: 132 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.1102966.1 =

Gauge32: 55 milliseconds

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.1102966.1 =

Gauge32: 67

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveVADEnable.1102966.1 =

INTEGER: true(1)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveCoderTypeRate.1102966.1 =

INTEGER: ietfg729r8000(25)

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.1102966.1 =

Gauge32: 52 packets

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.1102966.1 =

Gauge32: 1 packets

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.1102966.1 =

Gauge32: 325 packets

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.21.1102966.1 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.22.1102966.1 = ""

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.23.1102966.1 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.24.1102966.1 =

STRING: "172.16.99.22"

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.25.1102966.1 = INTEGER: 1720

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.26.1102966.1 = INTEGER: 1

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.27.1102966.1 =

STRING: "172.16.99.22"

CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.28.1102966.1 = INTEGER: 19066

Diese Ausgabe zeigt den vollständigen Snapshot der CiscoVoiceCommonDialControlMIB von CISCO-VOICE-DIAL-CONTROL-MIB zum Zeitpunkt der in diesem Dokument gezeigten VoIP-Verifizierungsbefehle:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-COMMON-DIAL-CONTROL-MIB:

ciscoVoiceCommonDialControlMIB

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveConnectionId.

1102966.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.

1102966.1 = INTEGER: true(1)

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.

1102966.1 = INTEGER: ietfg729r8000(25)

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCodecBytes.

1102966.1 = INTEGER: 20

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveInBandSignaling.

1102966.1 = INTEGER: cas(1)

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.6.

1102966.1 = ""

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.7.

1102966.1 = INTEGER: 2

Diese Ausgabe zeigt den vollständigen Snapshot von dialControlMib aus DIAL-CONTROL-MIB zum Zeitpunkt der in diesem Dokument gezeigten VoIP-Verifizierungsbefehle:

snmpwalk -c public 172.16.100.20 DIAL-CONTROL-MIB:dialControlMib

DIAL-CONTROL-MIB::dialCtlAcceptMode.0 = INTEGER: acceptAll(2)

DIAL-CONTROL-MIB::dialCtlTrapEnable.0 = INTEGER: enabled(1)

DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.1000.91 = INTEGER: voiceOverIp(104)

DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.2000.90 = INTEGER: voiceFXS(102)

DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37

DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.1000.91 = STRING: 1000

DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000

DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.1000.91 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.2000.90 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.1000.91 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.2000.90 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.1000.91 = INTEGER: speech(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.2000.90 = INTEGER: speech(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.1000.91 = INTEGER: both(3)

DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.2000.90 = INTEGER: both(3)

DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.1000.91 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.2000.90 = INTEGER: 0

DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.1000.91 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.2000.90 = INTEGER: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.1000.91 = INTEGER: disabled(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.2000.90 = INTEGER: disabled(2)

DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.1000.91 = INTEGER: active(1)

DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.2000.90 = INTEGER: active(1)

DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.1000.91 = Gauge32: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.2000.90 = Gauge32: 0 seconds

DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.1000.91 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.2000.90 = Gauge32: 0

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.1000.91 = ""

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.2000.90 = ""

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.1000.91 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.2000.90 = STRING:

DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.1000.91 = Timeticks:

(1102966) 3:03:49.66

DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.2000.90 = Timeticks:

(1102799) 3:03:47.99

DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000

DIAL-CONTROL-MIB::callActivePeerAddress.1102966.1 = STRING: 1000

DIAL-CONTROL-MIB::callActivePeerSubAddress.1102799.1 = STRING:

DIAL-CONTROL-MIB::callActivePeerSubAddress.1102966.1 = STRING:

DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000

DIAL-CONTROL-MIB::callActivePeerId.1102966.1 = INTEGER: 1000

DIAL-CONTROL-MIB::callActivePeerIfIndex.1102799.1 = INTEGER: 90

DIAL-CONTROL-MIB::callActivePeerIfIndex.1102966.1 = INTEGER: 91

DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102799.1 = INTEGER: 37

DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102966.1 = INTEGER: 0

DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks:

(1104123) 3:04:01.23

DIAL-CONTROL-MIB::callActiveConnectTime.1102966.1 = Timeticks:

(1104123) 3:04:01.23

DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)

DIAL-CONTROL-MIB::callActiveCallState.1102966.1 = INTEGER: active(4)

DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)

DIAL-CONTROL-MIB::callActiveCallOrigin.1102966.1 = INTEGER: originate(1)

DIAL-CONTROL-MIB::callActiveChargedUnits.1102799.1 = Gauge32: 0

DIAL-CONTROL-MIB::callActiveChargedUnits.1102966.1 = Gauge32: 0

DIAL-CONTROL-MIB::callActiveInfoType.1102799.1 = INTEGER: speech(2)

DIAL-CONTROL-MIB::callActiveInfoType.1102966.1 = INTEGER: speech(2)

DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641

DIAL-CONTROL-MIB::callActiveTransmitPackets.1102966.1 = Gauge32: 7875388

DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782

DIAL-CONTROL-MIB::callActiveTransmitBytes.1102966.1 = Gauge32: 157507741

DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955

DIAL-CONTROL-MIB::callActiveReceivePackets.1102966.1 = Gauge32: 7875641

DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081

DIAL-CONTROL-MIB::callActiveReceiveBytes.1102966.1 = Gauge32: 157512782

DIAL-CONTROL-MIB::callHistoryTableMaxLength.0 = INTEGER: 50

DIAL-CONTROL-MIB::callHistoryRetainTimer.0 = INTEGER: 15 minutes

Zugehörige Informationen

- Cisco IOS MIB-Tools

- Cisco SNMP Object Navigator

- SNMP-Technische Notizen

- Technischer Support und Dokumentation - Cisco Systems