Konfigurieren eines Zugangs-Servers mit PRIs für eingehende Multilink Async- und ISDN-Anrufe

Download-Optionen

  • PDF     (212.4 KB)
    Mit Adobe Reader auf verschiedenen Geräten anzeigen
  • ePub     (107.9 KB)
    In verschiedenen Apps auf iPhone, iPad, Android, Sony Reader oder Windows Phone anzeigen
  • Mobi (Kindle)     (141.1 KB)
    Auf einem Kindle-Gerät oder einer Kindle-App auf mehreren Geräten anzeigen
Aktualisiert:29. Januar 2008
Dokument-ID:6310

Inklusive Sprache

In dem Dokumentationssatz für dieses Produkt wird die Verwendung inklusiver Sprache angestrebt. Für die Zwecke dieses Dokumentationssatzes wird Sprache als „inklusiv“ verstanden, wenn sie keine Diskriminierung aufgrund von Alter, körperlicher und/oder geistiger Behinderung, Geschlechtszugehörigkeit und -identität, ethnischer Identität, sexueller Orientierung, sozioökonomischem Status und Intersektionalität impliziert. Dennoch können in der Dokumentation stilistische Abweichungen von diesem Bemühen auftreten, wenn Text verwendet wird, der in Benutzeroberflächen der Produktsoftware fest codiert ist, auf RFP-Dokumentation basiert oder von einem genannten Drittanbieterprodukt verwendet wird. Hier erfahren Sie mehr darüber, wie Cisco inklusive Sprache verwendet.

Informationen zu dieser Übersetzung

Cisco hat dieses Dokument maschinell übersetzen und von einem menschlichen Übersetzer editieren und korrigieren lassen, um unseren Benutzern auf der ganzen Welt Support-Inhalte in ihrer eigenen Sprache zu bieten. Bitte beachten Sie, dass selbst die beste maschinelle Übersetzung nicht so genau ist wie eine von einem professionellen Übersetzer angefertigte. Cisco Systems, Inc. übernimmt keine Haftung für die Richtigkeit dieser Übersetzungen und empfiehlt, immer das englische Originaldokument (siehe bereitgestellter Link) heranzuziehen.

Einführung

In vielen Umgebungen müssen Sie einen Access Server konfigurieren, der eingehende Anrufe von Async- und ISDN-Benutzern entgegennehmen kann. Diese Benutzer können sich dann nahtlos mit dem Netzwerk verbinden, als wären sie physisch anwesend. Eine solche Konfiguration wird häufig verwendet, um Benutzern, die unterwegs sind und Telearbeiter sind, sowie für Standorte des Small Office-Home Office (SOHO) Netzwerkverbindungen bereitzustellen.

In diesem Dokument wird beschrieben, wie ein Access Server so konfiguriert wird, dass er eingehende Async- und ISDN-Anrufe auf ISDN T1 PRI-Leitungen akzeptiert. Die Konfiguration bietet die erforderliche Mindestkonfiguration, damit der Netzwerkzugriffsserver (NAS) den Anruf annehmen kann. Sie können dieser Konfiguration je nach Ihren Anforderungen zusätzliche Funktionen hinzufügen.

Voraussetzungen

Anforderungen

Für dieses Dokument bestehen keine speziellen Anforderungen.

Verwendete Komponenten

Die Informationen in diesem Dokument basieren auf den folgenden Software- und Hardwareversionen:

  • Cisco AS5300 mit 192 MICA-Modems und acht T1-Ports, auf denen Cisco IOS® Software Release 12.2(5) ausgeführt wird.

  • Zwei T1 PRIs.

  • Ein PC, auf dem Microsoft Windows ausgeführt wird. Dieser PC verfügt über ein analoges Modem und eine Telefonverbindung zum öffentlichen Switch-Telefonnetz. Der PC wählt die T1 PRI, die mit dem AS5300 verbunden ist.

  • Cisco Router der Serien 800 und 1600 mit ISDN BRI-Schaltkreisen. Diese Router sind die ISDN-Wählclients. Die Konfiguration für den Cisco 1600 wird bereitgestellt. Sie können diese Client-Konfiguration auf jeden Router mit BRI-Schnittstelle anwenden.

  • Lokale Authentifizierung, Autorisierung und Abrechnung (AAA). Wenn Sie über einen AAA Radius- oder TACACS+-Server verfügen, können Sie mit beiden Servern AAA für eingehende Anrufe bereitstellen.

Hinweis: Die Konfiguration des Cisco 800-Routers ähnelt der Konfiguration des Cisco 1600-Routers und ist nicht in diesem Dokument enthalten.

Die Informationen in diesem Dokument wurden von den Geräten in einer bestimmten Laborumgebung erstellt. Alle in diesem Dokument verwendeten Geräte haben mit einer leeren (Standard-)Konfiguration begonnen. Wenn Ihr Netzwerk in Betrieb ist, stellen Sie sicher, dass Sie die potenziellen Auswirkungen eines Befehls verstehen.

Zugehörige Produkte

Sie können diese Konfiguration mit jedem Router verwenden, der über T1- oder PRI-Karten und interne digitale Modems verfügt (z. B. MICA, NextPort oder Microcom). Alle Router der AS5xxx-Serie mit T1- oder PRI-Karte und digitalen Modems können die Konzepte in dieser Konfiguration verwenden.

Cisco Router der Serie 2600 unterstützen keine internen digitalen Modems. Sie können Router der Cisco Serie 2600 so konfigurieren, dass sie nur ISDN-Anrufe annehmen, sofern der Router über ein T1-, PRI WIC- oder Netzwerkmodul verfügt.

Router der Cisco Serie 3600 unterstützen sowohl ISDN- als auch Modemanrufe. Für Cisco Router der Serie 3600 sind jedoch ein T1-, PRI WIC- oder Netzwerkmodul sowie das NM-xDM Digital Modem Network Module erforderlich.

Sie können diese Konfiguration auch mit E1- oder PRI-Ports ändern. Konfigurieren Sie den E1-Controller mit der Verkabelung, dem Framing und anderen physischen Merkmalen, die Ihr Telco bereitstellt. Die D-Channel-Konfiguration (Schnittstelle Serial x:15 für E1) ähnelt der in diesem Dokument beschriebenen Konfiguration.

Konventionen

Weitere Informationen zu Dokumentkonventionen finden Sie in den Cisco Technical Tips Conventions .

Konfigurieren

In diesem Abschnitt erhalten Sie Informationen zum Konfigurieren der in diesem Dokument beschriebenen Funktionen.

Hinweis: Um weitere Informationen zu den in diesem Dokument verwendeten Befehlen zu erhalten, verwenden Sie das Command Lookup Tool (nur registrierte Kunden).

Netzwerkdiagramm

In diesem Dokument wird die folgende Netzwerkeinrichtung verwendet:

5300.gif

Konfigurationen

In diesem Dokument werden folgende Konfigurationen verwendet:

maui-nas-02 (5300) 
maui-nas-02#show running-config 
 Building configuration...

 Current configuration : 3671 bytes
 !
 ! No configuration change since last restart
 !
 version 12.2
 service timestamps debug datetime msec
 service timestamps log datetime msec
 service password-encryption
 !
 hostname maui-nas-02
 !
 boot system flash:c5300-i-mz.122-5.bin
 aaa new-model
 aaa authentication login default local
 aaa authentication login NO_AUTHEN none
 aaa authentication ppp default local
 aaa authorization network default local 
 
!--- PPP authentication and network authorization are local. !--- Replace local with radius or tacacs if you use an AAA server.

 enable secret 5 <deleted>
 !
 username admin password 7 <deleted>
 username async_user password 7 <deleted>
 username travis_isdn password 7 <deleted>
 username austin_isdn password 7 <deleted>
 
!--- Usernames for local authentication of the call. !--- The client presents the username/password and the NAS !--- authenticates the peer.

 spe 1/0 1/8
  firmware location mica-modem-pw.2.7.3.0.bin
 spe 2/0 2/7
  firmware location mica-modem-pw.2.7.3.0.bin
 !
 ip subnet-zero
 ip domain-name maui-onions.com
 
!--- Tells the NAS how to qualify DNS lookups. !--- In this example, maui-onions.com is appended to the end of each !--- looked-up name.

 ip name-server 172.22.53.210
 
!--- Specifies the primary name server.

 !
 async-bootp dns-server 172.22.53.210
 
!--- Specifies (for async clients) the IP address of domain name servers. 

 isdn switch-type primary-ni
 
!--- Switch-type for this NAS. Obtain this information from the Telco.

 !
 controller T1 0
 
!--- First T1 PRI

  framing esf
 
!--- Framing for this T1 is Extended Super Frame (ESF). !--- Obtain this information from the Telco.

  clock source line primary
 
!--- T1 0 is the primary clock source for this NAS. !--- Clock source must be specified for the timing and synchronization !--- of the T1 carrier.

  linecode b8zs
 
!--- Linecoding for this T1. Obtain this information from the Telco.

  pri-group timeslots 1-24
 
!--- For T1 PRI scenarios, all 24 T1 timeslots are assigned as !--- ISDN PRI channels. The router now automatically creates the !--- corresponding D-channel: interface Serial 0:23.

 !
 controller T1 1
 
!--- Second T1 PRI.

  framing esf
 
!--- Framing for this T1 is Extended Super Frame (ESF). !--- Obtain this information from the Telco.

  clock source line secondary 1
 
!--- T1 1 is the first secondary clock source for this NAS. !--- If the primary clock fails, this secondary clock takes over.

  linecode b8zs
 
!--- Linecoding for this T1. Obtain this information from the Telco.

  pri-group timeslots 1-24
 
!--- For T1 PRI scenarios, all 24 T1 timeslots are assigned as ISDN !--- PRI channels. The router now automatically creates the !--- corresponding D-channel: interface Serial 1:23.

 !
 controller T1 2
 
!--- This T1 is unused.

  framing sf
  clock source line secondary 2
  linecode ami
 !
 
!--- Unused interface configuration is omitted here.

 !
 interface Loopback0
  ip address 172.22.60.1 255.255.255.0
 
!--- The IP pool for async users is in this subnet. !--- The routes for all async clients are summarized and !--- propagated to the backbone instead of 254 routes.

 !
 interface Loopback1
  ip address 172.22.61.1 255.255.255.0
 
!--- The IP pool for ISDN users is in this subnet. !--- The routes for all ISDN clients are summarized and !--- propagated to the backbone instead of 254 routes.

 !
 interface Ethernet0
  ip address 172.22.53.140 255.255.255.0
 !         
 
!--- Unused interface configuration is omitted here.

 !
 interface Serial0:23
 
!--- D-channel configuration for T1 0.

  no ip address
  encapsulation ppp

 !--- PPP encapsulation on this interface.

  dialer rotary-group 10
 
!--- T1 0 is a member of rotary group 10. !--- The rotary group configuration is in interface Dialer 10.

  isdn switch-type primary-ni
  isdn incoming-voice modem
 
!--- All incoming voice calls on this T1 are sent to the modems. !--- This command is required if this T1 is to accept async calls.

  no cdp enable
  ppp authentication chap
  ppp multilink
 !
 interface Serial1:23
 
!--- D-channel configuration for T1 1.

  no ip address
  encapsulation ppp
 
!--- PPP encapsulation on this interface.

  dialer rotary-group 10
 
!--- T1 1 is a member of rotary group 10. !--- The rotary group configuration is in interface Dialer 10.

  isdn switch-type primary-ni
  isdn incoming-voice modem
 
!--- All incoming voice calls on this T1 are sent to the modems. !--- This command is required if this T1 is to accept async calls.

  no cdp enable
  ppp authentication chap
  ppp multilink
 !
 interface Group-Async0
 
!--- This group-async interface is the configuration template for all modems. !--- You need not configure individual async interfaces because you can !--- clone the interfaces from one managed copy.

  ip unnumbered Loopback0
 
!--- A Loopback interface is always up/up. So, unnumber the loopback interface !--- for stability.

  encapsulation ppp
  dialer in-band
  dialer idle-timeout 900
  dialer-group 5
 
!--- Interesting traffic is defined in dialer-list 5. !--- Note: The specified dialer-group number must be the same as the !--- dialer-list number. In this example, the number is defined as "5".

  async mode interactive
 
!--- Users can dial in and get to a shell or PPP session on that line. !--- You can use this command in conjunction with autoselect ppp !--- under the line configuration to automatically detect the connection type.

  peer default ip address pool ASYNC
 
!--- Clients are assigned addresses from the IP address pool named ASYNC.

  no fair-queue
  ppp authentication chap
 
!--- Use CHAP authentication.

  ppp multilink
  group-range 1 192
 
!--- Modems 1 through 192 are members of this group async interface.

 !
 interface Dialer10
 
!--- Configuration for rotary group 10. !--- The Dialer interface number (10) must exactly match rotary !--- group number configured on the physical interfaces.

  ip unnumbered Loopback1
 
!--- A Loopback interface is always up/up. So, unnumber the loopback interface !--- for stability.

  encapsulation ppp
  dialer in-band

 !--- Enable V.25bis on this interface.

  dialer idle-timeout 900
 
!--- Idle timeout for incoming calls is 900 seconds (15 mins).

  dialer-group 5
 
!--- Apply interesting traffic definition from dialer-list 5. !--- Note: The specified dialer-group number must be the same !--- as the dialer-list number. !--- In this example, the number is defined as "5".

  peer default ip address pool ISDN
 
!--- Clients are assigned addresses from the IP address pool named ISDN.

  ppp authentication chap
  ppp multilink
 !
 router eigrp 69
  network 172.22.0.0
  auto-summary
  no eigrp log-neighbor-changes
 !
 ip local pool ASYNC 172.22.60.2 172.22.60.254
 ip local pool ISDN 172.22.61.2 172.22.61.254
 
!--- IP address pools for dialin clients.

 ip classless
 no ip http server
 !
 access-list 101 remark Interesting Traffic Definition to be 
 used in dialer-list 5
 access-list 101 deny   eigrp any any
 access-list 101 permit ip any any
 dialer-list 5 protocol ip list 101
 
!--- Access-list 101 defines interesting traffic. This definition is applied !--- to interface Dialer 10 and Group-Async 0 through dialer-group 5. !--- Note: The specified dialer-list number must be the same as the !--- dialer-group number. In this example, the number is defined as "5".

 !
 line con 0
  exec-timeout 0 0
  login authentication NO_AUTHEN
 
!--- Apply AAA list NO_AUTHEN configured previously. !--- That list has method "none". !--- There is no authentication on the console port.

 line 1 192
  modem InOut
 
!--- Support incoming and outgoing modem calls.

  transport input all
  autoselect during-login
 !
--- Displays the username:password prompt after modems connect.

  autoselect ppp
 
!--- Automatically launches PPP if the router detects incoming PPP packets. !--- Without this command the dialin client must manually !--- launch PPP (from Exec mode).

 line aux 0
 line vty 0 4
 !
 ntp clock-period 17180107
 ntp server 172.22.53.1
 end

maui-soho-01 (1600) 
maui-soho-01#show running-config
 Building configuration...

 Current configuration : 1609 bytes
 !
 version 12.1
 no service single-slot-reload-enable
 service timestamps debug datetime msec
 service timestamps log datetime msec
 service password-encryption
 !
 hostname maui-soho-01
 !
 logging rate-limit console 10 except errors
 !
 username admin password 7 <deleted>
 ip subnet-zero
 no ip finger
 !
 isdn switch-type basic-ni
 
!--- Switch-type for the BRI circuit. Obtain this information from the Telco.

 !
 interface Ethernet0
  ip address 10.0.0.1 255.255.255.0
  no keepalive
 !
 interface Serial0
  no ip address
  shutdown
 !
 interface BRI0
 
!--- BRI physical interface configuration.

  no ip address
 
!--- An IP address is not required on the physical BRI interface because !--- this is a dialer pool. !--- The IP addressing functionality is in interface Dialer 1 (dialer pool).

  encapsulation ppp
  dialer pool-member 1 
 
!--- Places the interface into dialer pool 1 from which Dialer interfaces !--- can draw channels as needed. !--- Links the physical interface with the logical dialer interfaces. !--- Dialer Pool 1 is defined in interface Dialer 1.

  isdn switch-type basic-ni
  isdn spid1 51255511110101 5551111
  isdn spid2 51255511120101 5551112
 
!--- Service Profile IDentifiers (SPIDs) are found primarily in North America. !--- SPIDs are not required for certain switch types. Confirm with your Telco. !--- If the Telco informs you that you do not need SPIDs, do not use these !--- two SPID commands.

  ppp authentication chap callin
 
!--- Perform one way CHAP authentication.

  ppp multilink
 
!--- Permit multilink on this BRI interface.

 !
 interface Dialer1
 
!--- This dialer is the logical interface for the dialer pool.

  ip address negotiated
 
!--- IP address for this interface is obtained from the NAS during !--- IPCP negotiation. Alternatively, you can also unnumber this interface !--- to a working interface (example, ethernet 0).

encapsulation ppp
  dialer pool 1
 
!--- Defines Dialer pool 1. !--- BRI 0 is a member of this pool.

  dialer idle-timeout 900
 
!--- Idle-timout for this link is 900 seconds (15 minutes). !--- The link is disconnected if there is no interesting traffic for 900 secs.

  dialer string 81560 class 56k
 
!--- Dial 81560 and use the map-class named "56k".

  dialer load-threshold 1 outbound
 
!--- Sets the outbound load level for traffic at which !--- additional connections are added to the MP bundle load level. !--- Values range from 1 (unloaded) to 255 (fully loaded). !--- With a threshold of 1, the additional links are immediately !--- brought up and added to the bundle.

  dialer-group 1
 
!--- Apply interesting traffic definition from dialer-list 1.

  ppp authentication chap callin
 
!--- Use one way PPP CHAP authentication.

  ppp chap hostname austin_isdn
 
!--- Use the CHAP username austin_isdn to authenticate to the other router.

  ppp chap password 7 <deleted>
 
!--- Use this CHAP password to authenticate to the other router.

  ppp multilink
 
!--- Allow multilink for the dialer profile. !--- Without this command multilink is NOT negotiated.

 !
 !
 ip classless
 ip route 0.0.0.0 0.0.0.0 Dialer1
 
!--- Set the default route to be interface Dialer 1 (the dialer pool). !--- Traffic sent to int Dialer1 causes the dialer pool member (int BRI 0) !--- to be dialed.

 no ip http server
 !
 !
 map-class dialer 56k
 
!--- Map-class named "56k" that you used with the dialer string in int Dialer1.

  dialer isdn speed 56
 
!--- Set the speed of the call to be 56k (the default speed is 64k). !--- This setting is optional for your connection. !--- Consult your Telco to find out if you need to configure the dial !--- speed to 56k.

 access-list 101 remark Interesting traffic for dialer-list 1
 access-list 101 deny   udp any any eq ntp
 access-list 101 permit ip any any
 
!--- Define NTP traffic as NOT interesting to prevent periodic NTP traffic !--- from keeping the link up indefinitely. !--- All other IP traffic is interesting. !--- Change this depending on your traffic needs.

 dialer-list 1 protocol ip list 101
 
!--- Access-list 101 defines interesting traffic. !--- Apply this to interface Dialer 1 through the command dialer-group 1. !--- Note: The specified dialer-list number must be the same as the !--- dialer-group number. In this example, the number is defined as "1"

 !
 line con 0
  transport input none
 line vty 0 4
  login
 !
 ntp clock-period 17042429
 ntp server 172.22.53.1
 end

Überprüfen

Dieser Abschnitt enthält Informationen, mit denen Sie überprüfen können, ob Ihre Konfiguration ordnungsgemäß funktioniert.

Bestimmte show-Befehle werden vom Output Interpreter Tool unterstützt (nur registrierte Kunden), mit dem Sie eine Analyse der show-Befehlsausgabe anzeigen können.

  • show isdn status: Stellt sicher, dass der Router ordnungsgemäß mit dem ISDN-Switch kommuniziert. Stellen Sie in der Ausgabe sicher, dass der Layer-1-Status AKTIV ist und dass der Layer-2-Status = MULTIPLE_FRAME_ESTABLISHED angezeigt wird. Dieser Befehl zeigt auch die Anzahl der aktiven Anrufe an. Weitere Informationen finden Sie unter Verwenden des Befehls show isdn status für die BRI-Fehlerbehebung.

  • show ppp multilink - Zeigt Informationen zu aktiven Multilink-Paketen an. Verwenden Sie diesen Befehl, um die Multilink-Verbindung zu überprüfen.

  • show dialer [Schnittstellentyp] - Zeigt allgemeine Diagnoseinformationen für DDR-konfigurierte Schnittstellen an. Wenn der Dialer richtig eingeschaltet wird, ist der Status Dialer die Meldung "Sicherungsschicht". Wenn eine physische Ebene angezeigt wird, wird impliziert, dass das Verbindungsprotokoll verfügbar war, das Network Control Protocol (NCP) jedoch nicht. Die Quell- und Zieladressen des Pakets, das das Wählen initiiert hat, werden in der Zeile Wählgrund angezeigt. Dieser show-Befehl zeigt auch die Konfiguration des Timers und die Zeit vor dem Timeout der Verbindung an.

  • Details zum Benutzernamen des Anrufers anzeigen - zeigt Parameter für den jeweiligen Benutzer an, z. B. die zugewiesene IP-Adresse, PPP- und PPP-Paketparameter. Wenn Ihre Version der Cisco IOS-Software diesen Befehl nicht unterstützt, verwenden Sie den Befehl show user.

  • show dialer map - Zeigt konfigurierte dynamische und statische Dialer-Karten an. Mit diesem Befehl können Sie überprüfen, ob eine dynamische Dialerzuordnung erstellt wird. Pakete können nur über eine Wählkarte weitergeleitet werden.

Beispielausgabe

Nachfolgend sind einige show-Befehlsausgaben für erfolgreiche Anrufe aufgeführt. Achten Sie auf die fett formatierten Abschnitte und die in der Ausgabe enthaltenen Kommentare. Vergleichen Sie die Ausgabe, die Sie erhalten, mit den hier gezeigten Ergebnissen.

Allgemeine Ansicht 

maui-nas-02#show users
  Line         User       Host(s)              Idle       Location
* 0 con 0                 idle                 00:00:00   
  97 tty 97    async_user Async interface      00:06:36   PPP: 172.22.60.2

!--- Async User. The IP address of the peer is indicated.


  Interface    User        Mode                Idle     Peer Address
  Vi1          austin_isd Virtual PPP (Bundle) 00:03:35 172.22.61.2
     Vi2          travis_isd Virtual PPP (Bundle) 00:00:20 172.22.61.3

!--- Virtual-Access Interface for the two multilink PPP users.

  Se0:1        austin_isd Sync PPP                    -   Bundle: Vi1
     Se0:2        austin_isd Sync PPP                    -   Bundle: Vi1

!--- User austin_isdn is connected through two B-channels(Multilink PPP). !--- Interface Virtual-Access 1 (Vi1) controls the two B-channels.

     Se0:3        travis_isd Sync PPP                    -   Bundle: Vi2
     Se0:4        travis_isd Sync PPP                    -   Bundle: Vi2

!--- User travis_isdn is connected through two B-channels (Multilink PPP). !--- Interface Virtual-Access 2 (Vi2) controls the two B-channels.


maui-nas-02#show dialer map

!--- Observe the Dynamic Dialer Maps created for each dialin client.

Dynamic dialer map ip 172.22.60.2 name async_user () on As97
Dynamic dialer map ip 172.22.61.2 name austin_isdn () on Di10
Dynamic dialer map ip 172.22.61.3 name travis_isdn () on Di10

maui-nas-02#show users
  Line         User       Host(s)              Idle       Location
* 0 con 0                 idle                 00:00:00   
  97 tty 97    async_user Async interface      00:06:36   PPP: 172.22.60.2

!--- Async User. The IP address of the peer is indicated.


  Interface    User        Mode                Idle     Peer Address
  Vi1          austin_isd Virtual PPP (Bundle) 00:03:35 172.22.61.2
  Vi2          travis_isd Virtual PPP (Bundle) 00:00:20 172.22.61.3

!--- Virtual-Access Interface for the two multilink PPP users.

  Se0:1        austin_isd Sync PPP                    -   Bundle: Vi1
  Se0:2        austin_isd Sync PPP                    -   Bundle: Vi1

!--- User austin_isdn is connected through two B-channels(Multilink PPP). !--- Interface Virtual-Access 1 (Vi1) controls the two B-channels.

 Se0:3        travis_isd Sync PPP                    -   Bundle: Vi2
 Se0:4        travis_isd Sync PPP                    -   Bundle: Vi2


!--- User travis_isdn is connected through two B-channels (Multilink PPP). !--- Interface Virtual-Access 2 (Vi2) controls the two B-channels.


maui-nas-02#show dialer map

!--- Observe the Dynamic Dialer Maps created for each dialin client.

Dynamic dialer map ip 172.22.60.2 name async_user () on As97
Dynamic dialer map ip 172.22.61.2 name austin_isdn () on Di10
Dynamic dialer map ip 172.22.61.3 name travis_isdn () on Di10
maui-nas-02#show users
  Line         User       Host(s)              Idle       Location
* 0 con 0                 idle                 00:00:00
  97 tty 97    async_user Async interface      00:06:36   PPP: 172.22.60.2

!--- Async User. The IP address of the peer is indicated.


       Interface    User        Mode                Idle     Peer Address
       Vi1          austin_isd Virtual PPP (Bundle) 00:03:35 172.22.61.2
       Vi2          travis_isd Virtual PPP (Bundle) 00:00:20 172.22.61.3
     
!--- Virtual-Access Interface for the two multilink PPP users.

       Se0:1        austin_isd Sync PPP                    -   Bundle: Vi1
       Se0:2        austin_isd Sync PPP                    -   Bundle: Vi1
     
!--- User austin_isdn is connected through two B-channels(Multilink PPP). !--- Interface Virtual-Access 1 (Vi1) controls the two B-channels.

       Se0:3        travis_isd Sync PPP                    -   Bundle: Vi2
       Se0:4        travis_isd Sync PPP                    -   Bundle: Vi2
     
!--- User travis_isdn is connected through two B-channels (Multilink PPP). !--- Interface Virtual-Access 2 (Vi2) controls the two B-channels.


     maui-nas-02#show dialer map
     
!--- Observe the Dynamic Dialer Maps created for each dialin client.

     Dynamic dialer map ip 172.22.60.2 name async_user () on As97
     Dynamic dialer map ip 172.22.61.2 name austin_isdn () on Di10
     Dynamic dialer map ip 172.22.61.3 name travis_isdn () on Di10

Für einen analogen Anruf 

maui-nas-02#show caller user async_user detail

       User: async_user, line tty 97, service Async
     
!--- Shows hardware-level settings for the user named async_user.

             Active time 00:00:34, Idle time 00:00:16
       Timeouts:            Absolute  Idle      Idle
                                      Session   Exec
           Limits:          -         -         00:10:00  
           Disconnect in:   -         -         -         
       TTY: Line 97, running PPP on As97
     
!--- The call is terminated on interface Async 97. !--- This interface is included in the Group-Async configuration.

       Location: PPP: 172.22.60.2
     
!--- IP address for the peer. This address is obtained from the IP pool "ASYNC".

       DS0: (slot/unit/channel)=0/0/2
     
!--- T1 channel on which the call arrived. !--- The call arrived on channel 0 in T1 0. 

       Line: Baud rate (TX/RX) is 115200/115200, no parity, 1 stopbits, 8 databits
       Status: Ready, Active, No Exit Banner, Async Interface Active
               HW PPP Support Active
       Capabilities: Hardware Flowcontrol In, Hardware Flowcontrol Out
                     Modem Callout, Modem RI is CD, 
                     Line usable as async interface, Integrated Modem
       Modem State: Ready

       User: async_user, line As97, service PPP
     
!--- PPP setting for the user named async_user. !--- Notice that the call is terminated on int Async97.

             Active time 00:00:32, Idle time 00:00:30
       Timeouts:            Absolute  Idle
           Limits:          -         00:15:00  
           Disconnect in:   -         00:14:28  
       PPP: LCP Open, multilink Closed, CHAP (<- AAA), IPCP
     
!--- LCP state is OPEN. If LCP state is not OPEN, !--- use debug ppp negotiation to isolate LCP issues.

       LCP: -> peer, ACCM, AuthProto, MagicNumber, PCompression, ACCompression
            <- peer, ACCM, MagicNumber, PCompression, ACCompression
       NCP: Open IPCP
     
!--- IPCP state is open. If IPCP state is not OPEN, !--- use debug ppp negotiation to isolate IPCP issues.

       IPCP: <- peer, Address
             -> peer, Address
       Dialer: Connected, inbound
               Idle timer 900 secs, idle 31 secs
               Type is IN-BAND ASYNC, group As97
       IP: Local 172.22.60.1, remote 172.22.60.2
     
!--- NAS IP address and the IP address assigned to the peer.

       Counts: 27 packets input, 1545 bytes, 0 no buffer
               1 input errors, 1 CRC, 0 frame, 0 overrun
               14 packets output, 347 bytes, 0 underruns
               0 output errors, 0 collisions, 0 interface resets
     
!--- Packets pass through the connection.

Für ISDN-Anrufe 

     maui-nas-02#show caller user austin_isdn detail 
     
!--- The user named austin_isdn has two PPP links, !--- and one virtual interface bundle.


       User: austin_isdn, line Se0:3, service PPP
     
!--- Shows PPP layer settings for the first channel !--- that belongs to the user named austin_isdn.

             Active time 00:04:01, Idle time 00:00:00
       Timeouts:            Absolute  Idle
           Limits:          -         -         
           Disconnect in:   -         -         
       PPP: LCP Open, multilink Open, CHAP (<- AAA)
     
!--- LCP state is OPEN. If LCP state is not OPEN, !--- use debug ppp negotiation to isolate LCP issues.

       LCP: -> peer, AuthProto, MagicNumber, MRRU, EndpointDisc
            <- peer, MagicNumber, MRRU, EndpointDisc
       Dialer: Connected, inbound
               Type is ISDN, group Di10
     
!--- Incoming call used rotary group of int Dialer 10.

       IP: Local 172.22.61.1
     
!--- IP address of the int Loopback 1. !--- Remember that int Dialer 1 was unnumbered to Loop 1. !--- The remote IP address is indicated under the virtual-interface.

       Bundle: Member of austin_isdn, last input 00:00:00
       Counts: 55 packets input, 1635 bytes, 0 no buffer
               0 input errors, 0 CRC, 0 frame, 0 overrun
               82 packets output, 3479 bytes, 0 underruns
               0 output errors, 0 collisions, 0 interface resets

       User: austin_isdn, line Se0:4, service PPP
     
!--- Shows PPP layer settings for the second channel !--- that belongs to the user named austin_isdn.

             Active time 00:03:59, Idle time 00:00:00
       Timeouts:            Absolute  Idle
           Limits:          -         -         
           Disconnect in:   -         -         
       PPP: LCP Open, multilink Open, CHAP (<- AAA)
       LCP: -> peer, AuthProto, MagicNumber, MRRU, EndpointDisc
            <- peer, MagicNumber, MRRU, EndpointDisc
       Dialer: Connected to , inbound
               Type is ISDN, group Di10
       IP: Local 172.22.61.1
       Bundle: Member of austin_isdn, last input 00:00:00
       Counts: 50 packets input, 1589 bytes, 0 no buffer
               0 input errors, 0 CRC, 0 frame, 0 overrun
               77 packets output, 3429 bytes, 0 underruns
               0 output errors, 0 collisions, 0 interface resets       

       User: austin_isdn, line Vi1, service PPP Bundle
     
!--- Shows Virtual-Access Interface Bundle that controls the connections.

             Active time 00:04:02, Idle time 00:04:01
       Timeouts:            Absolute  Idle
           Limits:          -         00:15:00  
           Disconnect in:   -         00:10:58  
       PPP: LCP Open, multilink Open, IPCP, CDPCP
       LCP: -> peer, MagicNumber, MRRU, EndpointDisc
            <- peer
       NCP: Open IPCP, CDPCP
     
!--- IPCP State is open. If IPCP state is not OPEN, !--- use debug ppp negotiation to isolate IPCP issues.

       IPCP: <- peer, Address
             -> peer, Address
       Dialer: Connected, inbound
               Idle timer 900 secs, idle 1 secs
               Type is IN-BAND SYNC, group Di10
       IP: Local 172.22.61.1, remote 172.22.61.2
     
!--- Dialer interface (Local) IP address !--- and the IP address assigned to the peer.

       Bundle: First link of austin_isdn, 2 links, last input 00:00:01
       Counts: 12 packets input, 1712 bytes, 0 no buffer
               0 input errors, 0 CRC, 0 frame, 0 overrun
               67 packets output, 5030 bytes, 0 underruns
               0 output errors, 0 collisions, 0 interface resets

Fehlerbehebung

Dieser Abschnitt enthält Informationen zur Fehlerbehebung in Ihrer Konfiguration.

Ressourcen zur Fehlerbehebung

Verwenden Sie diese Ressourcen je nach Bedarf:

Befehle zur Fehlerbehebung

Bestimmte show-Befehle werden vom Output Interpreter Tool unterstützt (nur registrierte Kunden), mit dem Sie eine Analyse der show-Befehlsausgabe anzeigen können.

Hinweis: Bevor Sie Debugbefehle ausgeben, lesen Sie Wichtige Informationen über Debug-Befehle.

  • Debug Dialer (Debug-Dialer): Zeigt Informationen zum DDR-Debuggen über die auf einer Dialer-Schnittstelle empfangenen Pakete an. Diese Informationen können helfen, sicherzustellen, dass es interessanten Datenverkehr, der die Dialer-Schnittstelle verwendet.

  • debug isdn q931 - zeigt die Einrichtung der Anrufe und das Beenden der ISDN-Netzwerkverbindung (Layer 3).

  • Debug-Modem: Zeigt die Modemzeilenaktivität auf einem Zugriffsserver an. Die Ausgabe wird angezeigt, wenn die Modemleitung den Status ändert.

  • debug modem csm - Ermöglicht Ihnen, CSM-Probleme (Call Switching Module) auf Routern mit internen digitalen Modems zu beheben. Mit diesem Befehl können Sie die gesamte Abfolge der Umschaltung von ein- und ausgehenden Anrufen verfolgen.

  • debug ppp negotiation: Zeigt Informationen über den PPP-Datenverkehr und den Austausch an und handelt Link Control Protocol (LCP), Authentication und Network Control Protocol (NCP) aus. Eine erfolgreiche PPP-Aushandlung öffnet zuerst den LCP-Status, authentifiziert sich dann, und schließlich wird NCP ausgehandelt. Bei der LCP-Aushandlung werden mehrere Link-Parameter wie die Maximum Receive Reconstructed Unit (MRRU) festgelegt.

  • debug ppp authentication: Zeigt Meldungen des PPP-Authentifizierungsprotokolls an, darunter CHAP-Paketaustausch und Passwort Authentication Protocol (PAP)-Austausch.

  • debug ppp error (ppp-Fehler debuggen): Zeigt Protokollfehler und Fehlerstatistiken an, die mit der Aushandlung und Ausführung von PPP-Verbindungen verknüpft sind.

Beispielausgabe für Debugging

Hier einige Debug-Ausgaben für erfolgreiche Aufrufe. Achten Sie auf die Fettschnitte und die Kommentare in den Ausgaben. Vergleichen Sie die Ausgabe, die Sie erhalten, mit dem hier gezeigten Ergebnis.

Für einen analogen Anruf 

maui-nas-02#debug isdn q931
     ISDN Q931 packets debugging is on
     maui-nas-02#debug modem
     Modem control/process activation debugging is on
     maui-nas-02#debug modem csm
     Modem Management Call Switching Module debugging is on
     maui-nas-02#debug ppp negotiation
     PPP protocol negotiation debugging is on
     maui-nas-02#debug ppp authentication
     PPP authentication debugging is on

     maui-nas-02#
     Sep 28 13:13:28.369: ISDN Se0:23: RX <-  SETUP pd = 8  callref = 0x5285

     
!--- Incoming Q.931 SETUP message. This indicates an incoming call. !--- For more information on Q.931 refer to !--- Troubleshooting ISDN BRI Layer 3 using the debug isdn q931 Command.

     Sep 28 13:13:28.369:   Bearer Capability i = 0x9090A2
     Sep 28 13:13:28.369:   Channel ID i = 0xA18383
     Sep 28 13:13:28.369:   Progress Ind i = 0x8183 - Origination address is non-ISDN 
     Sep 28 13:13:28.369:   Called Party Number i = 0xA1, '81560', Plan:ISDN, Type:National
     Sep 28 13:13:28.373: VDEV_ALLOCATE: 2/0 is allocated
     
!--- The Call Switch Module (CSM) is informed about the call. !--- The CSM allocates modem 2/0 to the incoming call.

     Sep 28 13:13:28.373: EVENT_FROM_ISDN::dchan_idb=0x618569F4, call_id=0x28, 
     ces=0x0 bchan=0x2, event=0x1, cause=0x0
     Sep 28 13:13:28.373:  dev in call to isdn : set dnis_collected & fap_notify
     Sep 28 13:13:28.373: EVENT_FROM_ISDN:(0028): DEV_INCALL at slot 2 and port 0
     Sep 28 13:13:28.373:  EVENT_FROM_ISDN: decode:calling 0ct3 0x0, called oct3 
     0xA1, oct3a 0x0,mask 0x3C
     Sep 28 13:13:28.373:  EVENT_FROM_ISDN: csm_call_info:calling 0ct3 0x0, 
     called oct3 0xA1, oct3a 0x0,mask 0x3C
     Sep 28 13:13:28.377: CSM_PROC_IDLE: CSM_EVENT_ISDN_CALL at slot 2, port 0
     Sep 28 13:13:28.377: Mica Modem(2/0): Configure(0x1 = 0x0) 
     Sep 28 13:13:28.377: Mica Modem(2/0): Configure(0x23 = 0x0) 
     Sep 28 13:13:28.377: Mica Modem(2/0): Call Setup
     
!--- CSM sends the Call Setup Message to Modem 2/0. !--- The modem must now go off-hook.

     Sep 28 13:13:28.377: csm_connect_pri_vdev: TS allocated at bp_stream 0, 
     bp_Ch 0,vdev_common 0x6141BB68
     Sep 28 13:13:28.377: ISDN Se0:23: TX ->  CALL_PROC pd = 8  callref = 0xD285
     Sep 28 13:13:28.377:         Channel ID i = 0xA98383
     
!--- The Call Proceeding Message is sent through the D-channel.

     Sep 28 13:13:28.377: ISDN Se0:23: TX ->  ALERTING pd = 8  callref = 0xD285
     Sep 28 13:13:28.445: Mica Modem(2/0): State Transition to Call Setup
     
!--- Modem transitions to state Call Setup. !--- For more information on MICA Modem States refer to MICA Modem States.

     Sep 28 13:13:28.445: Mica Modem(2/0): Went offhook
     
!--- Modem informs the CSM that it went offhook.

     Sep 28 13:13:28.445: CSM_PROC_IC2_RING: CSM_EVENT_MODEM_OFFHOOK at slot 2, port 0
     Sep 28 13:13:28.445: ISDN Se0:23: TX ->  CONNECT pd = 8  callref = 0xD285
     
!--- D-channel transmits a CONNECT.

     Sep 28 13:13:28.461: ISDN Se0:23: RX <-  CONNECT_ACK pd = 8  callref = 0x5285
     
!--- The Q.931 CONNECT_ACK message is received.

     Sep 28 13:13:28.461: ISDN Se0:23: CALL_PROGRESS: CALL_CONNECTED call id 0x28, 
     bchan 2, dsl 0
     Sep 28 13:13:28.461: EVENT_FROM_ISDN::dchan_idb=0x618569F4, call_id=0x28, 
     ces=0x0 bchan=0x2, event=0x4, cause=0x0
     Sep 28 13:13:28.461: EVENT_FROM_ISDN:(0028): DEV_CONNECTED at slot 2 and port 0
     Sep 28 13:13:28.461: CSM_PROC_IC6_WAIT_FOR_CONNECT: 
     CSM_EVENT_ISDN_CONNECTED at slot 2, port 0
     Sep 28 13:13:28.465: Mica Modem(2/0): Link Initiate
     
!--- When the Q.931 CONNECT_ACK message is received, the Link initiate message !--- is sent to the MICA modem, and negotiation with remote modem occurs.

     Sep 28 13:13:28.465: %ISDN-6-CONNECT: Interface Serial0:2 is now connected to N/A N/A
     Sep 28 13:13:29.557: Mica Modem(2/0): State Transition to Connect
     
!--- Modem moves to the Connect state.

     Sep 28 13:13:34.073: Mica Modem(2/0): State Transition to Link
     Sep 28 13:13:45.478: Mica Modem(2/0): State Transition to Trainup
     Sep 28 13:13:53.642: Mica Modem(2/0): State Transition to EC Negotiating
     Sep 28 13:13:54.122: Mica Modem(2/0): State Transition to Steady State
     
!--- Modem tranistions to the Steady state.

     Sep 28 13:13:54.266: TTY97: DSR came up
     
!--- Indicates that the modem trainup is complete.

     Sep 28 13:13:54.266: tty97: Modem: IDLE->(unknown)
     Sep 28 13:13:54.266: TTY97: EXEC creation
     Sep 28 13:13:54.266: TTY97: set timer type 10, 30 seconds
     Sep 28 13:13:57.202: TTY97: Autoselect(2) sample 7E
     Sep 28 13:13:57.202: TTY97: Autoselect(2) sample 7EFF
     Sep 28 13:13:57.202: TTY97: Autoselect(2) sample 7EFF7D
     Sep 28 13:13:57.202: TTY97: Autoselect(2) sample 7EFF7D23
     Sep 28 13:13:57.202: TTY97 Autoselect cmd:  ppp negotiate
     
!--- The router detects PPP packets and automatically launches PPP.

     Sep 28 13:13:57.206: TTY97: EXEC creation
     Sep 28 13:13:57.206: TTY97: create timer type 1, 600 seconds
     Sep 28 13:13:57.334: TTY97: destroy timer type 1
     Sep 28 13:13:57.334: TTY97: no timer type 0 to destroy
     Sep 28 13:13:57.334: As97 IPCP: Install route to 172.22.60.2
     Sep 28 13:13:59.334: %LINK-3-UPDOWN: Interface Async97, changed state to up
     Sep 28 13:13:59.334: As97 PPP: Treating connection as a callin
     Sep 28 13:13:59.334: As97 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 0 load]
     Sep 28 13:13:59.334: As97 LCP: State is Listen
     
!--- LCP negotiation begins.

     Sep 28 13:14:00.214: As97 LCP: I CONFREQ [Listen] id 3 len 23
     
!--- Incoming LCP CONFREQ. !--- For more information on how to interpret PPP debugs, refer to !--- Dialup Technology: Troubleshooting Techniques.

     Sep 28 13:14:00.214: As97 LCP:    ACCM 0x000A0000 (0x0206000A0000)
     Sep 28 13:14:00.214: As97 LCP:    MagicNumber 0x0F7CD34A (0x05060F7CD34A)
     Sep 28 13:14:00.214: As97 LCP:    PFC (0x0702)
     Sep 28 13:14:00.214: As97 LCP:    ACFC (0x0802)
     Sep 28 13:14:00.214: As97 LCP:    Callback 6  (0x0D0306)
     Sep 28 13:14:00.214: Unthrottle 97
     Sep 28 13:14:00.214: As97 LCP: O CONFREQ [Listen] id 1 len 43
     Sep 28 13:14:00.214: As97 LCP:    ACCM 0x000A0000 (0x0206000A0000)
     Sep 28 13:14:00.214: As97 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:14:00.214: As97 LCP:    MagicNumber 0x3090DE31 (0x05063090DE31)
     Sep 28 13:14:00.214: As97 LCP:    PFC (0x0702)
     Sep 28 13:14:00.214: As97 LCP:    ACFC (0x0802)
     Sep 28 13:14:00.214: As97 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:14:00.214: As97 LCP:    EndpointDisc 1 Local (
     0x130E016D6175692D6E61732D3032)
     Sep 28 13:14:00.214: As97 LCP: O CONFREJ [Listen] id 3 len 7
     Sep 28 13:14:00.214: As97 LCP:    Callback 6  (0x0D0306)
     Sep 28 13:14:00.342: As97 LCP: I CONFREQ [REQsent] id 4 len 20
     Sep 28 13:14:00.342: As97 LCP:    ACCM 0x000A0000 (0x0206000A0000)
     Sep 28 13:14:00.342: As97 LCP:    MagicNumber 0x0F7CD34A (0x05060F7CD34A)
     Sep 28 13:14:00.342: As97 LCP:    PFC (0x0702)
     Sep 28 13:14:00.342: As97 LCP:    ACFC (0x0802)
     Sep 28 13:14:00.342: As97 LCP: O CONFACK [REQsent] id 4 len 20
     Sep 28 13:14:00.342: As97 LCP:    ACCM 0x000A0000 (0x0206000A0000)
     Sep 28 13:14:00.342: As97 LCP:    MagicNumber 0x0F7CD34A (0x05060F7CD34A)
     Sep 28 13:14:00.342: As97 LCP:    PFC (0x0702)
     Sep 28 13:14:00.342: As97 LCP:    ACFC (0x0802)
     Sep 28 13:14:02.214: As97 LCP: TIMEout: State ACKsent
     Sep 28 13:14:02.214: As97 LCP: O CONFREQ [ACKsent] id 2 len 43
     Sep 28 13:14:02.214: As97 LCP:    ACCM 0x000A0000 (0x0206000A0000)
     Sep 28 13:14:02.214: As97 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:14:02.214: As97 LCP:    MagicNumber 0x3090DE31 (0x05063090DE31)
     Sep 28 13:14:02.214: As97 LCP:    PFC (0x0702)
     Sep 28 13:14:02.214: As97 LCP:    ACFC (0x0802)
     Sep 28 13:14:02.214: As97 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:14:02.214: As97 LCP:    EndpointDisc 1 Local 
     (0x130E016D6175692D6E61732D3032)
     Sep 28 13:14:02.326: As97 LCP: I CONFREJ [ACKsent] id 2 len 22
     Sep 28 13:14:02.326: As97 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:14:02.326: As97 LCP:    EndpointDisc 1 Local 
     (0x130E016D6175692D6E61732D3032)
     Sep 28 13:14:02.326: As97 LCP: O CONFREQ [ACKsent] id 3 len 25
     Sep 28 13:14:02.326: As97 LCP:    ACCM 0x000A0000 (0x0206000A0000)
     Sep 28 13:14:02.326: As97 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:14:02.326: As97 LCP:    MagicNumber 0x3090DE31 (0x05063090DE31)
     Sep 28 13:14:02.326: As97 LCP:    PFC (0x0702)
     Sep 28 13:14:02.326: As97 LCP:    ACFC (0x0802)
     Sep 28 13:14:02.518: As97 LCP: I CONFACK [ACKsent] id 3 len 25
     Sep 28 13:14:02.518: As97 LCP:    ACCM 0x000A0000 (0x0206000A0000)
     Sep 28 13:14:02.518: As97 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:14:02.518: As97 LCP:    MagicNumber 0x3090DE31 (0x05063090DE31)
     Sep 28 13:14:02.518: As97 LCP:    PFC (0x0702)
     Sep 28 13:14:02.518: As97 LCP:    ACFC (0x0802)
     Sep 28 13:14:02.518: As97 LCP: State is Open
     
!--- LCP negotiation is complete.

     Sep 28 13:14:02.518: As97 PPP: Phase is AUTHENTICATING, 
     by this end [0 sess, 0 load]
     Sep 28 13:14:02.518: As97 CHAP: O CHALLENGE id 1 len 32 from "maui-nas-02"
     Sep 28 13:14:02.646: As97 CHAP: I RESPONSE id 1 len 31 from "async_user"
     Sep 28 13:14:02.646: As97 AUTH: Started process 0 pid 34
     Sep 28 13:14:02.650: As97 CHAP: O SUCCESS id 1 len 4
     
!--- CHAP authentication is successful. !--- If authentication fails, check the username and password. !--- Refer to Dialup Technology: Troubleshooting Techniques 
.
     Sep 28 13:14:02.650: As97 PPP: Phase is UP [0 sess, 0 load]
     Sep 28 13:14:02.650: As97 IPCP: O CONFREQ [Closed] id 1 len 10
     
!--- IPCP negotiation begins.

     Sep 28 13:14:02.650: As97 IPCP:    Address 172.22.60.1 (0x0306AC163C01)
     Sep 28 13:14:02.758: As97 IPCP: I CONFREQ [REQsent] id 1 len 40
     Sep 28 13:14:02.758: As97 IPCP:    CompressType VJ 15 slots CompressSlotID 
     (0x0206002D0F01)
     Sep 28 13:14:02.758: As97 IPCP:    Address 0.0.0.0 (0x030600000000)
     Sep 28 13:14:02.758: As97 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
     Sep 28 13:14:02.758: As97 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
     Sep 28 13:14:02.758: As97 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
     Sep 28 13:14:02.758: As97 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
     Sep 28 13:14:02.758: As97 AAA/AUTHOR/IPCP: Start.  
     Her address 0.0.0.0, we want 172.22.60.2
     Sep 28 13:14:02.758: As97 AAA/AUTHOR/IPCP: Done.  
     Her address 0.0.0.0, we want 172.22.60.2
     
!--- Address is obtained from the Address Pool named "Async".

     Sep 28 13:14:02.758: As97 IPCP: O CONFREJ [REQsent] id 1 len 28
     Sep 28 13:14:02.758: As97 IPCP:    CompressType VJ 15 slots CompressSlotID 
     (0x0206002D0F01)
     Sep 28 13:14:02.758: As97 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
     Sep 28 13:14:02.758: As97 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
     Sep 28 13:14:02.758: As97 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
     Sep 28 13:14:02.802: As97 CCP: I CONFREQ [Not negotiated] id 1 len 15
     Sep 28 13:14:02.802: As97 CCP:    MS-PPC supported bits 0x00000001 
     (0x120600000001)
     Sep 28 13:14:02.802: As97 CCP:    Stacker history 1 check mode EXTENDED 
     (0x1105000104)
     Sep 28 13:14:02.802: As97 LCP: O PROTREJ [Open] id 4 len 21 protocol CCP
     Sep 28 13:14:02.802: As97 LCP:  (0x80FD0101000F12060000000111050001)
     Sep 28 13:14:02.802: As97 LCP:  (0x04)
     Sep 28 13:14:02.802: As97 IPCP: I CONFACK [REQsent] id 1 len 10
     Sep 28 13:14:02.802: As97 IPCP:    Address 172.22.60.1 (0x0306AC163C01)
     Sep 28 13:14:04.650: As97 IPCP: TIMEout: State ACKrcvd
     Sep 28 13:14:04.650: As97 IPCP: O CONFREQ [ACKrcvd] id 2 len 10
     Sep 28 13:14:04.650: As97 IPCP:    Address 172.22.60.1 (0x0306AC163C01)
     Sep 28 13:14:04.758: As97 IPCP: I CONFACK [REQsent] id 2 len 10
     Sep 28 13:14:04.758: As97 IPCP:    Address 172.22.60.1 (0x0306AC163C01)
     Sep 28 13:14:05.750: As97 IPCP: I CONFREQ [ACKrcvd] id 2 len 34
     Sep 28 13:14:05.750: As97 IPCP:    Address 0.0.0.0 (0x030600000000)
     Sep 28 13:14:05.750: As97 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
     Sep 28 13:14:05.750: As97 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
     Sep 28 13:14:05.750: As97 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
     Sep 28 13:14:05.750: As97 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
     Sep 28 13:14:05.750: As97 AAA/AUTHOR/IPCP: Start.  
     Her address 0.0.0.0, we want 172.22.60.2
     Sep 28 13:14:05.750: As97 AAA/AUTHOR/IPCP: Done.  
     Her address 0.0.0.0, we want 172.22.60.2
     Sep 28 13:14:05.750: As97 IPCP: O CONFREJ [ACKrcvd] id 2 len 22
     Sep 28 13:14:05.750: As97 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
     Sep 28 13:14:05.754: As97 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
     Sep 28 13:14:05.754: As97 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
     Sep 28 13:14:05.878: As97 IPCP: I CONFREQ [ACKrcvd] id 3 len 16
     Sep 28 13:14:05.878: As97 IPCP:    Address 0.0.0.0 (0x030600000000)
     Sep 28 13:14:05.878: As97 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
     Sep 28 13:14:05.878: As97 AAA/AUTHOR/IPCP: Start.  
     Her address 0.0.0.0, we want 172.22.60.2
     Sep 28 13:14:05.878: As97 AAA/AUTHOR/IPCP: Done.  
     Her address 0.0.0.0, we want 172.22.60.2
     Sep 28 13:14:05.878: As97 IPCP: O CONFNAK [ACKrcvd] id 3 len 10
     Sep 28 13:14:05.878: As97 IPCP:    Address 172.22.60.2 (0x0306AC163C02)
     Sep 28 13:14:05.990: As97 IPCP: I CONFREQ [ACKrcvd] id 4 len 16
     Sep 28 13:14:05.990: As97 IPCP:    Address 172.22.60.2 (0x0306AC163C02)
     Sep 28 13:14:05.990: As97 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
     Sep 28 13:14:05.990: As97 AAA/AUTHOR/IPCP: Start.  
     Her address 172.22.60.2, we want 172.22.60.2
     Sep 28 13:14:05.990: As97 AAA/AUTHOR/IPCP: Reject 172.22.60.2, using 172.22.60.2
     Sep 28 13:14:05.990: As97 AAA/AUTHOR/IPCP: Done.  
     Her address 172.22.60.2, we want 172.22.60.2
     Sep 28 13:14:05.994: As97 IPCP: O CONFACK [ACKrcvd] id 4 len 16
     Sep 28 13:14:05.994: As97 IPCP:    Address 172.22.60.2 (0x0306AC163C02)
     Sep 28 13:14:05.994: As97 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
     Sep 28 13:14:05.994: As97 IPCP: State is Open
     
!--- IPCP negotiation is complete. The user is now connected.

Für ISDN-Anrufe 

maui-nas-02#debug isdn q931
     ISDN Q931 packets debugging is on
     maui-nas-02#debug ppp negotiation
     PPP protocol negotiation debugging is on
     maui-nas-02#debug ppp authentication
     PPP authentication debugging is on

     Sep 28 13:25:02.630: ISDN Se0:23: RX <-  SETUP pd = 8  callref = 0x5346
     
!--- Incoming Q.931 Setup message.

     Sep 28 13:25:02.630:         Bearer Capability i = 0x8890218F
     Sep 28 13:25:02.630:         Channel ID i = 0xA18384
     Sep 28 13:25:02.630:         Called Party Number i = 0xA1, '81560', 
     Plan:ISDN, Type:National
     Sep 28 13:25:02.634: %LINK-3-UPDOWN: Interface Serial0:3, changed state to up
     Sep 28 13:25:02.638: Se0:3 PPP: Treating connection as a callin
     Sep 28 13:25:02.638: Se0:3 PPP: Phase is ESTABLISHING, 
     Passive Open [0 sess, 1 load]
     Sep 28 13:25:02.638: Se0:3 LCP: State is Listen
     Sep 28 13:25:02.638: ISDN Se0:23: TX ->  CALL_PROC pd = 8  callref = 0xD346
     Sep 28 13:25:02.638:         Channel ID i = 0xA98384
     Sep 28 13:25:02.638: ISDN Se0:23: TX ->  CONNECT pd = 8  callref = 0xD346
     Sep 28 13:25:02.638:         Channel ID i = 0xA98384
     Sep 28 13:25:02.658: ISDN Se0:23: RX <-  CONNECT_ACK pd = 8  callref = 0x5346

     Sep 28 13:25:02.658: ISDN Se0:23: CALL_PROGRESS: 
     CALL_CONNECTED call id 0x2B, bchan 3, dsl 0
     
!--- Call is connected.

     Sep 28 13:25:02.886: Se0:3 LCP: I CONFREQ [Listen] id 61 len 28
     Sep 28 13:25:02.886: Se0:3 LCP:    MagicNumber 0x1EB88B1C (0x05061EB88B1C)
     Sep 28 13:25:02.886: Se0:3 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:02.886: Se0:3 LCP:    EndpointDisc 1 Local 
     (0x130E0161757374696E5F6973646E)
     Sep 28 13:25:02.886: Se0:3 LCP: O CONFREQ [Listen] id 1 len 33
     Sep 28 13:25:02.886: Se0:3 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:25:02.886: Se0:3 LCP:    MagicNumber 0x309AFABD (0x0506309AFABD)
     Sep 28 13:25:02.886: Se0:3 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:02.886: Se0:3 LCP:    EndpointDisc 1 Local 
     (0x130E016D6175692D6E61732D3032)
     Sep 28 13:25:02.886: Se0:3 LCP: O CONFACK [Listen] id 61 len 28
     Sep 28 13:25:02.886: Se0:3 LCP:    MagicNumber 0x1EB88B1C (0x05061EB88B1C)
     Sep 28 13:25:02.886: Se0:3 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:02.886: Se0:3 LCP:    EndpointDisc 1 Local 
     (0x130E0161757374696E5F6973646E)
     Sep 28 13:25:02.922: Se0:3 LCP: I CONFACK [ACKsent] id 1 len 33
     Sep 28 13:25:02.922: Se0:3 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:25:02.922: Se0:3 LCP:    MagicNumber 0x309AFABD (0x0506309AFABD)
     Sep 28 13:25:02.922: Se0:3 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:02.922: Se0:3 LCP:    EndpointDisc 1 Local 
     (0x130E016D6175692D6E61732D3032)
     Sep 28 13:25:02.922: Se0:3 LCP: State is Open
     
!--- LCP negotiation is complete.

     Sep 28 13:25:02.922: Se0:3 PPP: 
     Phase is AUTHENTICATING, by this end [0 sess, 1 load]
     Sep 28 13:25:02.922: Se0:3 CHAP: O CHALLENGE id 1 len 32 from "maui-nas-02"
     Sep 28 13:25:02.954: Se0:3 CHAP: I RESPONSE id 1 len 32 from "austin_isdn"
     Sep 28 13:25:02.954: Se0:3 CHAP: O SUCCESS id 1 len 4
     
!--- PPP CHAP authentication is successful.

     Sep 28 13:25:02.958: Se0:3 PPP: Phase is VIRTUALIZED [0 sess, 1 load]
     Sep 28 13:25:02.958: Vi1 PPP: Phase is DOWN, Setup [0 sess, 1 load]
     Sep 28 13:25:02.982: Vi1 PPP: Phase is DOWN, Setup [0 sess, 1 load]
     Sep 28 13:25:02.982: Se0:3 IPCP: 
     Packet buffered while building MLP bundle interface
     Sep 28 13:25:02.986: %LINK-3-UPDOWN: Interface Virtual-Access1, 
     changed state to up
     
!--- Virtual-Access Interface is up. !--- This interface controls the incoming call.

     Sep 28 13:25:02.986: Vi1 PPP: Treating connection as a callin
     Sep 28 13:25:02.986: Vi1 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
     Sep 28 13:25:02.986: Vi1 LCP: State is Listen
     Sep 28 13:25:02.986: Vi1 PPP: Phase is UP [0 sess, 1 load]
     Sep 28 13:25:02.986: Vi1 IPCP: O CONFREQ [Closed] id 1 len 10
     Sep 28 13:25:02.986: Vi1 IPCP:    Address 172.22.61.1 (0x0306AC163D01)
     Sep 28 13:25:02.990: Vi1 MLP: Added first link Se0:3 to bundle austin_isdn
     Sep 28 13:25:02.990: Vi1 PPP: Pending ncpQ size is 1
     Sep 28 13:25:02.990: Se0:3 IPCP: Redirect packet to Vi1
     Sep 28 13:25:02.990: Vi1 IPCP: I CONFREQ [REQsent] id 45 len 10
     Sep 28 13:25:02.990: Vi1 IPCP:    Address 10.0.0.1 (0x03060A000001)
     Sep 28 13:25:02.990: Vi1 AAA/AUTHOR/IPCP: Start.  
     Her address 10.0.0.1, we want 0.0.0.0
     Sep 28 13:25:02.990: Vi1 AAA/AUTHOR/IPCP: Reject 10.0.0.1, using 0.0.0.0
     Sep 28 13:25:02.990: Vi1 AAA/AUTHOR/IPCP: Done.  
     Her address 10.0.0.1, we want 0.0.0.0
     Sep 28 13:25:02.990: Vi1 IPCP: O CONFNAK [REQsent] id 45 len 10
     Sep 28 13:25:02.990: Vi1 IPCP:    Address 172.22.61.2 (0x0306AC163D02)
     
!--- Peer IP address is assigned from IP Pool named "ISDN".

     Sep 28 13:25:02.990: Se0:3 CDPCP: MLP bundle interface is built, 
     process packets now 
     Sep 28 13:25:02.990: Se0:3 CDPCP: Redirect packet to Vi1
     Sep 28 13:25:02.990: Vi1 CDPCP: I CONFREQ [Not negotiated] id 23 len 4
     Sep 28 13:25:02.990: Vi1 LCP: O PROTREJ [Open] id 1 len 10 protocol CDPCP 
     (0x820701170004)
     Sep 28 13:25:03.010: Vi1 IPCP: I CONFACK [REQsent] id 1 len 10
     Sep 28 13:25:03.010: Vi1 IPCP:    Address 172.22.61.1 (0x0306AC163D01)
     Sep 28 13:25:03.010: Vi1 IPCP: I CONFREQ [ACKrcvd] id 46 len 4
     Sep 28 13:25:03.010: Vi1 IPCP: O CONFACK [ACKrcvd] id 46 len 4
     Sep 28 13:25:03.010: Vi1 IPCP: State is Open
     
!--- IPCP negotiation is complete. The call is now connected.

     Sep 28 13:25:03.014: Di10 IPCP: Install route to 172.22.61.2
     Sep 28 13:25:03.958: %LINEPROTO-5-UPDOWN: 
     Line protocol on Interface Serial0:3, changed state to up
     Sep 28 13:25:03.986: %LINEPROTO-5-UPDOWN: 
     Line protocol on Interface Virtual-Access1, changed state to up
     Sep 28 13:25:04.146: ISDN Se0:23: RX <-  SETUP pd = 8  callref = 0x5409
     
!--- The second link in the multilink connection arrives.

     Sep 28 13:25:04.150:         Bearer Capability i = 0x8890218F
     Sep 28 13:25:04.150:         Channel ID i = 0xA18385
     Sep 28 13:25:04.150:         Called Party Number i = 0xA1, '81560', Plan:ISDN, 
     Type:National
     Sep 28 13:25:04.154: %LINK-3-UPDOWN: Interface Serial0:4, changed state to up
     Sep 28 13:25:04.154: %ISDN-6-CONNECT: Interface Serial0:3 is now connected to  
     austin_isdn
     Sep 28 13:25:04.154: Se0:4 PPP: Treating connection as a callin
     Sep 28 13:25:04.154: Se0:4 PPP: Phase is ESTABLISHING, 
     Passive Open [0 sess, 1 load]
     Sep 28 13:25:04.154: Se0:4 LCP: State is Listen
     Sep 28 13:25:04.158: ISDN Se0:23: TX ->  CALL_PROC pd = 8  callref = 0xD409
     Sep 28 13:25:04.158:         Channel ID i = 0xA98385
     Sep 28 13:25:04.158: ISDN Se0:23: TX ->  CONNECT pd = 8  callref = 0xD409
     Sep 28 13:25:04.158:         Channel ID i = 0xA98385
     Sep 28 13:25:04.178: ISDN Se0:23: RX <-  CONNECT_ACK pd = 8  callref = 0x5409

     Sep 28 13:25:04.178: ISDN Se0:23: CALL_PROGRESS: 
     CALL_CONNECTED call id 0x2C, bchan 4, dsl 0
     Sep 28 13:25:04.394: Se0:4 LCP: I CONFREQ [Listen] id 51 len 28
     Sep 28 13:25:04.394: Se0:4 LCP:    MagicNumber 0x1EB8910D (0x05061EB8910D)
     Sep 28 13:25:04.394: Se0:4 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:04.394: Se0:4 LCP:    EndpointDisc 1 Local 
     (0x130E0161757374696E5F6973646E)
     Sep 28 13:25:04.394: Se0:4 LCP: O CONFREQ [Listen] id 1 len 33
     Sep 28 13:25:04.394: Se0:4 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:25:04.394: Se0:4 LCP:    MagicNumber 0x309B00A6 (0x0506309B00A6)
     Sep 28 13:25:04.394: Se0:4 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:04.394: Se0:4 LCP:    EndpointDisc 1 Local 
     (0x130E016D6175692D6E61732D3032)
     Sep 28 13:25:04.394: Se0:4 LCP: O CONFACK [Listen] id 51 len 28
     Sep 28 13:25:04.394: Se0:4 LCP:    MagicNumber 0x1EB8910D (0x05061EB8910D)
     Sep 28 13:25:04.394: Se0:4 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:04.394: Se0:4 LCP:    EndpointDisc 1 Local 
     (0x130E0161757374696E5F6973646E)
     Sep 28 13:25:04.430: Se0:4 LCP: I CONFACK [ACKsent] id 1 len 33
     Sep 28 13:25:04.430: Se0:4 LCP:    AuthProto CHAP (0x0305C22305)
     Sep 28 13:25:04.430: Se0:4 LCP:    MagicNumber 0x309B00A6 (0x0506309B00A6)
     Sep 28 13:25:04.430: Se0:4 LCP:    MRRU 1524 (0x110405F4)
     Sep 28 13:25:04.430: Se0:4 LCP:    EndpointDisc 1 Local 
     (0x130E016D6175692D6E61732D3032)
     Sep 28 13:25:04.430: Se0:4 LCP: State is Open
     Sep 28 13:25:04.430: Se0:4 PPP: Phase is AUTHENTICATING, 
     by this end [0 sess, 1 load]
     Sep 28 13:25:04.430: Se0:4 CHAP: O CHALLENGE id 1 len 32 from "maui-nas-02"
     Sep 28 13:25:04.462: Se0:4 CHAP: I RESPONSE id 1 len 32 from "austin_isdn"
     Sep 28 13:25:04.466: Se0:4 CHAP: O SUCCESS id 1 len 4
     Sep 28 13:25:04.466: Se0:4 PPP: Phase is VIRTUALIZED [0 sess, 1 load]
     Sep 28 13:25:04.466: Vi1 MLP: Added link Se0:4 to bundle austin_isdn
     
!--- An additional Link is now added to exiting Virtual Interface Bundle.

     Sep 28 13:25:05.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0:4, 
     changed state to up
     Sep 28 13:25:10.154: %ISDN-6-CONNECT: 
     Interface Serial0:4 is now connected to austin_isdn
     
!--- The second call is connected. The multilink Bundle is complete. 

     maui-nas-02#

Zugehörige Informationen

Revisionsverlauf

Überarbeitung Veröffentlichungsdatum Kommentare
1.0
29-Jan-2008
Erstveröffentlichung

War dieses Dokument hilfreich?

FeedbackFeedback

Cisco kontaktieren

Dieses Dokument gilt für folgende Produkte.