Sending Advanced Commands for the Cisco Unified MeetingPlace 3500 Series Media Server
In the Advanced section of the Settings tab, you can send text-based commands used for the enhanced control of the Media Server. Advanced commands are not case-sensitive.
Note We recommend that only advanced users or users who have consulted with Cisco Customer Support perform actions involving advanced commands.
Table 2-6 lists all of the available advanced commands.
Procedure
- In the MSA interface, on the sidebar, click MCU.
- Click the Settings tab.
- Click Advanced.
- Click Commands to open the Advanced Commands window.
- Enter a command in the Command field, or choose a command from the Available Commands list.
- Enter a parameter value for the command (where applicable) in the Parameters field, or choose a parameter from the Available Parameters list.
- Click Send.
The system displays the results of the advanced command in the Response field, indicating whether or not the Media Server received and executed the command. If you send an invalid command, the system displays a "bad parameter" or "NOT FOUND" message.
Copyright © 2002-2008, Cisco Systems, Inc. All rights reserved.