Overview
Cisco cBR Series Converged Broadband Routers
for Cisco IOS XE 3.18S
cBR Release Notes
cBR Hardware Installation
DOCSIS SW Configuration
Video SW Configuration
Command Reference
for Cisco IOS XE 3.18S
cBR Release Notes
cBR Hardware Installation
DOCSIS SW Configuration
Video SW Configuration
Command ReferenceA Cisco cBR Series Converged Broadband Router is a revolutionary Converged Cable Access Platform (CCAP) that is designed to deliver unprecedented performance and scalability to 1+ Tbps. A "hub in a box" platform that integrates headend functions with software defined networking architectures for greater operational efficiency and faster service velocity.
Installation
- Regulatory Compliance
- Prepare to Install
- Install Cisco cBR Chassis
- Install Fan Module
- Install Power System
- Install Supervisor
- Install Supervisor PIC
- Install Cable Management Bracket on PIC
- Install SFP+ Modules in PIC
- Install Supervisor Card
- Use SFP+ Ports on PIC
- Use DTI Ports on PIC
- Use NME Ports on PIC
- Use Console Port on PIC
- Use Auxiliary Port on PIC
- Cable Management for Supervisor PIC
- Use USB Port on Card
- Use Console Port on Card
- Install Interface Cards
- Power Up Cisco cBR Chassis
Configuration
- DOCSIS Configuration
- Basic Configuration
- Layer 2 and DOCSIS
3.0 Configuration
- Downstream Interface Configuration
- Upstream Interface Configuration
- DOCSIS Interface and Fiber Node Configuration
- Service Group Based Configuration
- DOCSIS Load Balancing Groups
- DOCSIS Load Balancing Movements
- DOCSIS 3.0 Downstream Bonding
- Docsis 2.0 A-TDMA Modulation Profiles
- Downstream Resiliency Bonding Group
- Downstream Channel ID Assignment
- Upstream Channel Bonding
- Spectrum Management and Advanced Spectrum Management
- Upstream Scheduler Mode
- Generic Routing Encapsulation
- Transparent LAN Service over Cable
- Downgrading Channel Bonding in Battery Backup Mode
- Upstream Bonding Support for D-PON
- Energy Management Mode
- Layer 2 and DOCSIS 3.1 Configuration
- Layer 2 and Layer 3 VPN Configuration
- Layer 3 Configuration
- High Availability
- Application—Voice and Video Configuration
- PacketCable and PacketCable Multimedia Configuration
- Quality of Services Configuration
- Security and Cable Monitoring Configuration
- Troubleshooting and Network Management Configuration
- Video Configuration
- Basic Configuration and Provisioning Construct
- Video Services Provisioning Model
- Virtual Carrier Group and Virtual Edge Input
- Service Distribution Group
- Video QAM Carriers
- Logical Edge Device
- Smart Licensing
- Physical to Virtual Binding
- Table Based Configuration
- Management IP Interface
- Encryption
- Global Video Configuration
- Advanced Video MPEG Features
- Important Notes
- Video Features
- Basic Configuration and Provisioning Construct
Operations
- SDN Application
- Converged EdgeQAM Manager
- Monitor Cisco cBR Chassis
- Monitor Fan Module
- Monitor Power System
- Monitor Supervisor
- Monitor Interface Cards
- Maintain Cisco cBR Chassis
- Maintain Fan Module
- Maintain Power System
- Maintain Supervisor
- Maintain Interface Cards
- Maintain DS PHY Module (Interactive Workflow)
- Maintain US PHY Module (Interactive Workflow)
- Maintain Air Filter (Video)
- Online Insertion and Removal
- Upgrade
- Troubleshoot