Use the Date and Time page to manually configure the system time, or to dynamically synchronize the system time with the Network Time Protocol (NTP) server.
1. Click Device Management > Date and Time.
2. Specify the time zone from the Time zone drop-down list.
3. Select the Manually Set System Time radio button to manually set the date and time. Enter the values in the Date and Time fields.
4. Select the Dynamically Set System Time radio button to automatically synchronize the date and time with the specified NTP server:
• Daylight Saving Time Adjustment: Click On to automatically adjust the time for Daylight Saving Time, or click Off to disable it.
• Default NTP Servers: Click this option to use the default NTP server.
• Custom NTP Servers: Click this option to use a custom NTP server. Enter the IP addresses or domain names of up to two custom NTP servers in the Server 1 Name/IP Address and Server 2 Name/IP Address fields. The server 1 is the primary NTP server and the server 2 is the secondary NTP server.
• Current Time: Displays the current date and time synchronized with the configured NTP server.