If you need to configure a feature for a custom service that is not in the standard list, you must first define the service object.
1. Click Networking > Service Management.
2. In the Services area, click Add Service to add a new service.
Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click the Delete (x) icon. To delete multiple entries, check them and click Delete. The default services cannot be deleted. Only the port range for the default services can be modified.
The Service Object - Add/Edit window opens.
3. Enter the following information:
• Name: Enter the name for the service.
• Protocol: Specify the protocol and port range for the service:
– IP: Uses the predefined IP type. If you choose this option, enter the protocol number in the IP Type field.
– ICMP: Internet Control Message Protocol (ICMP) is a TCP/IP protocol used to send error and control messages. If you choose this option, enter the ICMP type in the ICMP Type field.
– TCP: Transmission Control Protocol (TCP) is a transport protocol in TCP/IP. TCP ensures that a message is sent accurately and in its entirety. If you choose this option, enter the starting port number in the Port Range Start field and the ending port number in the Port Range End field.
– UDP: User Datagram Protocol (UDP) is a protocol within the TCP/IP protocol suite that is used in place of TCP when a reliable delivery is not required. If you choose this option, enter the starting port number in the Port Range Start field and the ending port number in the Port Range End field.
– Both (TCP/UDP): If you choose this option, enter the starting port number in the Port Range Start field and the ending port number in the Port Range End field.
4. Click OK to save your settings.