Using the Setup Wizard for the Initial Configuration

Use the Setup Wizard to quickly configure the primary features of your security appliance, such as Cisco.com account credentials, security license, remote administration, port, WAN, LAN, DMZ, WAN redundancy, WLAN (for ISA550W and ISA570W only), and security services. Refer to the following steps:

 • Starting the Setup Wizard

 • Configuring Cisco.com Account Credentials

 • Enabling Firmware Upgrade

 • Validating Security License

 • Enabling Bonjour and CDP Discovery Protocols

 • Configuring Remote Administration

 • Configuring Physical Ports

 • Configuring the Primary WAN

 • Configuring the Secondary WAN

 • Configuring WAN Redundancy

 • Configuring Default LAN Settings

 • Configuring DMZ

 • Configuring DMZ Services

 • Configuring Wireless Radio Settings

 • Configuring Intranet WLAN Access

 • Configure Security Services

 • Viewing Configuration Summary

Note Before you use the Setup Wizard to configure your security appliance, we recommend that you have the following requirements:

 • An active WAN connection for verifying your Cisco.com account credentials, validating the security license, and upgrading your firmware to the latest version from Cisco.com.

 • A valid Cisco.com account for validating the security license and upgrading your firmware to the latest version from Cisco.com. To register a Cisco.com account, go to https:// tools.cisco.com/RPF/register/register.do.

 • The Product Authorization Key (PAK), or license code, for validating the security license and activating security services. You can find the license code from the Software License Claim Certificate that Cisco provides upon purchase of the security appliance.