Configuring SSL VPN User Groups
16. Use the User Group page to configure the users and user groups for SSL remote access. The SSL VPN service must be enabled for the user groups. All members of a user group can use the selected SSL VPN group policy to establish the SSL VPN connections.
17. Click Add to add a user group.
Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click the Delete (x) icon. To delete multiple entries, check them and click Delete.
18. In the Group Settings tab, enter the following information:
• Name: Enter the name for the user group.
• Services: Specify the service policy for the user group. The SSL VPN service must be enabled for this user group so that all members of the user group can establish the SSL VPN tunnels based on the selected SSL VPN group policy to access your network resources.
19. In the Membership tab, specify the members of the user group. You must add at least one user in the user group before proceeding.
• To add a member, select an existing user from the User list and then click the right arrow. The members of the group appear in the Membership list.
• To delete a member from the group, select the member from the Membership list and then click the left arrow.
• To create a new member, enter the username in the User Name field and the password in the Password field, enter the same password in the Password Confirm field for confirmation, and then click Create.