The Network Interfaces page shows the configuration and status information about the wired and wireless interfaces. To view network interface information, select Status and Statistics > Network Interfaces.
The following information is displayed:
• LAN Status—Displays information for LAN interface, including:
– MAC Address—The MAC address of the WAP device.
– IP Address—The IP address of the WAP device.
– Subnet Mask—The subnet mask of the WAP device.
– Default Gateway—The default gateway of the WAP device.
– Domain Name Server-1—The IP address of the domain name server 1 used by the WAP device.
– Domain Name Server-2—The IP address of the domain name server 2 used by the WAP device.
– IPv6 Address—The IPv6 address of the WAP device.
– IPv6 Autoconfigured Global Address—The IPv6 auto-configured global address.
– IPv6 Link Local Address—The IPv6 link local address of the WAP device.
– Default IPv6 Gateway—The default IPv6 gateway of the WAP device.
– IPv6-DNS-1—The IPv6 address of the IPv6 DNS server 1 used by the WAP device.
– IPv6-DNS-2—The IPv6 address of the IPv6 DNS server 2 used by the WAP device.
These settings apply to the internal interface. Click the Edit link to change any of these settings. You will be redirected to the IPv4 Setting page.
• Port Status—Displays the status for LAN interfaces.
• Interfaces—Number of the Ethernet interface.
– Link Status—Status of the Ethernet interface.
– Port Speed—Speed of the Ethernet interface.
– Duplex Mode—Duplex mode of the Ethernet interface.
– Green Ethernet Status—The status of the Ether interface.
Click the Edit link to change any of these settings. You will be redirected to the Port Settings page.
• VLAN Status—Displays information for all existing VLANs, including:
– VLAN ID—Identifier of the VLAN.
– Description—Description of the VLAN.
– Eth—The interface is a tagged or untagged member of the VLAN.
Click the Edit link to change any of these settings. You will be redirected to the VLAN Configuration page.
• Radio Status—Displays information for the wireless radio interfaces, including:
– Wireless Radio—The wireless radio mode is enabled or disabled for the radio interface.
– MAC Address—The MAC address associated with the radio interface.
– Mode—The 802.11 mode (a/b/g/n/ac) used by the radio interface.
– Channel—The channel used by the radio interface.
– Operational bandwidth—The operational bandwidth used by the radio interface.
Click the Edit link to change any of these settings. You will be redirected to the Radio page.
• Interface Status—Displays status information for each Virtual Access Point (VAP) and on each Wireless Distribution System (WDS) interface, including:
• Interface—The wireless interface of the WAP device.
• Name (SSID)—The wireless interface name.
• Status—The administrative status (up or down) of the VAP.
• MAC Address— The MAC address of the radio interface.
• VLAN ID—The VLAN ID of the radio interface.
• Profile—The name of any associated scheduler profile.
• State—The current state (active or inactive). The state indicates whether the VAP is exchanging data with a client.
Click Refresh to refresh the screen and show the most current information.