Configuring MAC Address Filtering

MAC address filtering permits and blocks network access from specific devices through the use of MAC address list.

To configure MAC address filtering:

  1. Click Security > MAC Address Filtering. The MAC Address Filtering page opens.
  2. In the Filter Policy area, choose one of the following filtering policies:
    • Deny Network Access: The MAC addresses in the list are denied and all other MAC addresses not included in the list are permitted.
    • Permit Network Access: Only the MAC addresses in the list are permitted and all other MAC addresses not included in the list are denied.
  3. In the MAC Address Filtering Policies area, specify the list of MAC addresses. Click Add to add a MAC address. The MAC Address Filtering Policy page opens.

    4. NOTE     Up to 20 MAC addresses can be configured on the RV315W.

  4. Enter the following information:
    • MAC Address: Enter the MAC address that you want to filter.
    • Time Range: Enter the starting time and ending time to keep the MAC address filtering rule active at specific times.
    • Week: Check the days to keep the MAC address filtering rule active at specific days.
  5. Click Save to save your settings.