Configuring WAN1/LAN0 Interface

The WAN1/LAN0 interface on the back panel of the RV315W can be configured to a secondary WAN interface (WAN1) or an additional LAN interface (LAN0).

To set the port type of the WAN1/LAN0 interface:

  1. Click Port Settings > WAN > WAN1/LAN0. The WAN1/LAN0 page opens.
  2. Click LAN0 to set this port to an additional LAN port, or click WAN1 to set this port to a secondary WAN port.
  3. Click Save to save your settings.

    4. CAUTION    

    Changing the port type of the WAN1/LAN0 interface requires the RV315W to be rebooted. Note that changing the port type from WAN1 to LAN0 will reboot the RV315W with the factory default settings. The previous settings that you made on the RV315W will be lost.