المنتجات الصوتية الأخرى

Accessing SPA3102 Interactive Voice Response (IVR) Menu

Firmware Upgrade on SPA112 and SPA122

Firmware Upgrade Settings on the SPA8000 Phone Adapter

Access the Web Configuration Utility on the SPA122

Quick Setup for VOIP on SPA100 Series

Reset Factory Defaults via Interactive Voice Response (IVR) on SPA8000 Analog Telephone Adapter

Configure Call Progress Tones in Regional Voice Parameters on SPA100 Series

Configure Network Service Setting on SPA122

SIP Settings on the SPA100 Series

Call Forward Settings on SPA100 Series

Configure NAT Settings for Voice Lines on SPA100 Series Phone Adapters

Configure Supplementary Service Settings on SPA112 and SPA122 Phone Adapters

Miscellaneous Regional Settings on the SPA8000 Phone Adapter

Status Lights and Ports on the SPA112 and SPA122

Firmware Upgrade to version 6.1.12 SR1 on a Cisco SPA8000

View Voice Information on SPA112 and SPA122 Phone Adapters

Acceptance and Transmission of the Dialed Digits on SPA100 Series Analog Telephone Adapters

Subscriber Information on SPA100 Series Phone Adapter

View Dynamic Host Configuration Protocol (DHCP) Server Information Status on SPA122 Analog Telephone Adapter

View System Information on SPA112 and SPA122 Phone Adapters

Restore Factory Defaults on SPA100 Series

Selective Call Forward Settings on the SPA100 Series

System Status on the SPA8000 Analog Telephone Adapter

SPA112: BE-SPA-SSL Certificate Recognition Issue

Audio Quality on SPA Phones Connected to UC320W

Configure Log Module on SPA100 Series

Troubleshoot a SPA112 and a SPA122 when the Connected Phones Do Not Ring

Fax Troubleshooting on the SPA100 Series