IPv4 Configuration

Use the IPv4 Setting page to configure the IPv4 address.

Procedure

Step 1

Select LAN > IPv4 Configuration.

Step 2

Configure the following IPv4 settings:

  • Connection Type—By default, the DHCP client on the WAP device automatically broadcasts the requests for network information. If you want to use a static IP address, you must disable the DHCP client and manually configure the IP address and other network information.

    Choose one of the following options:

    • DHCP—The WAP device acquires its IP address from a DHCP server on the LAN.

    • Static IP—Manually configure the IPv4 address. The IPv4 address should be in a form similar to xxx.xxx.xxx.xxx (172.17.144.170).

  • Static IP Address, Subnet Mask, and Default Gateway—Enter the static IP address, subnet mask and default gateway.

  • Domain Name Servers — Select one of the following options:

    • Dynamic — The WAP device acquires the DNS server addresses from a DHCP server on the LAN.

    • Manual — Enter up to two IP addresses in the fields provided.

Step 3

Click Save to save the changes.