Traffic Statistics

Traffic Statistics

The Traffic Statistics page provides some basic information about the current AP and a real-time display of the transmit and receive statistics for the Ethernet interface on the AP and for the VAPs. All transmit and receive statistics shown are totals since the AP was last started. If you reboot the AP, these figures indicate transmit and receive totals since the reboot.

To view transmit and receive statistics for the AP, click the Traffic Statistics tab. Click the Refresh button to refresh the page.

Field

Description

Network Interfaces

The name of the Ethernet or VAP interfaces.

Status

Shows whether the interface is up or down.

MAC Address

MAC address for the specified interface. The VAP has a unique MAC address for each interface.

VLAN ID

The virtual LAN (VLAN) ID is used to establish multiple networks on the same AP. The VLAN ID is configured on the Wireless > VAP tab.

Name (SSID)

The network name, also known as the SSID, is an alphanumeric key that uniquely identifies a Virtual Access Point. The name (SSID) is configured on the VAP tab.NA means either that the entry is not applicable or is not supported.

Transmit and Receive Information

Total Packets

Indicates total packets sent (in Transmit table) or received (in Received table) on that interface.

Total Bytes

Indicates total bytes sent (in Transmit table) or received (in Received table) on that interface.

Total Dropped Packets

Indicates total number of packets sent (in Transmit table) or received (in Received table) on that interface that were dropped. NA means that the drop and error counters for the VAP interfaces and the WDS interfaces are not supported.

Total Dropped Bytes

Indicates total number of bytes sent (in Transmit table) or received (in Received table) on that interface that were dropped. NA means that the drop and error counters for the VAP interfaces and the WDS interfaces are not supported.

Errors

Displays the total number of transmit and receive errors detected by the AP. NA means that the drop and error counters for the VAP interfaces and the WDS interfaces are not supported.

Field	Description
Network Interfaces	The name of the Ethernet or VAP interfaces.
Status	Shows whether the interface is up or down.
MAC Address	MAC address for the specified interface. The VAP has a unique MAC address for each interface.
VLAN ID	The virtual LAN (VLAN) ID is used to establish multiple networks on the same AP. The VLAN ID is configured on the Wireless > VAP tab.
Name (SSID)	The network name, also known as the SSID, is an alphanumeric key that uniquely identifies a Virtual Access Point. The name (SSID) is configured on the VAP tab.NA means either that the entry is not applicable or is not supported.
Transmit and Receive Information
Total Packets	Indicates total packets sent (in Transmit table) or received (in Received table) on that interface.
Total Bytes	Indicates total bytes sent (in Transmit table) or received (in Received table) on that interface.
Total Dropped Packets	Indicates total number of packets sent (in Transmit table) or received (in Received table) on that interface that were dropped. NA means that the drop and error counters for the VAP interfaces and the WDS interfaces are not supported.
Total Dropped Bytes	Indicates total number of bytes sent (in Transmit table) or received (in Received table) on that interface that were dropped. NA means that the drop and error counters for the VAP interfaces and the WDS interfaces are not supported.
Errors	Displays the total number of transmit and receive errors detected by the AP. NA means that the drop and error counters for the VAP interfaces and the WDS interfaces are not supported.