SNMP Targets

SNMPv3 Targets send trap messages to the SNMP manager. Each target is identified by a target name and associated with target IP address, UDP port, and SNMP user name.

Field	Description
IP Address	Enter the IP address of the remote SNMP manager to receive the target.
Port	Enter the UDP port to use for sending SNMP targets.
Users	Enter the name of the SNMP user to associate with the target.
SNMPv3 Targets	This field shows the SNMPv3 Targets on the Access Point. To remove a target, select it and click Remove.

Note: After you configure the SNMPv3 Target settings, you must click Apply to apply the changes and to save the settings.