To display the configuration information currently running on the terminal, use the show running-config EXEC command. This command replaces the write terminal command.
show running-config
Syntax Description
This command has no arguments or keywords.
Command Mode
EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.0.
Use this command in conjunction with the show startup-config command to compare the information in running memory to the information stored in NVRAM or in a location specified by the CONFIG_FILE environment variable. On the Cisco 7000 family, this variable specifies the configuration file used for initialization (startup). Use the boot config command in conjunction with the copy running-config startup-config command to set the CONFIG_FILE environment variable.
Sample Display
The following partial sample output displays the running configuration:
Router2# show running-config Building configuration... Current configuration: ! version 11.2 no service udp-small-servers no service tcp-small-servers ! hostname Router2 ! ... ! end