Use the set prompt command to change the prompt for the CLI.
set prompt prompt_string
Syntax Description
prompt_string String to use as the command prompt. Default
The default configuration has the prompt set to Console>.
Command Type
Switch command.
Command Mode
Privileged.
Usage Guideline
In Catalyst 5000 series software release 4.1(1) and later, if you use the set system name command to assign a name to the switch, the switch name is used as the prompt string. However, if you specify a different prompt string using the set prompt command, that string is used for the prompt.
Example
This example shows how to set the prompt to system100>:
Console> (enable) set prompt system100> system100> (enable)Related Command
set system name