set port name

Use the set port name command to configure a name for a port.

set port name mod_num/port_num [name_string]

Syntax Description

mod_num	Number of the module.
port_num	Number of the port.
name_string	(Optional) String that describes the port.

Default

The default configuration has no port name configured for any port.

Command Type

Switch command.

Command Mode

Privileged.

Usage Guidelines

If you do not specify the name string, the port name is cleared.

This command is not supported for the RSM.

Example

This example shows how to set port 1 on module 4 to Snowy:

Console> (enable) set port name 4/1 Snowy
Port 4/1 name set.
Console> (enable)
  

Related Commands

set port disable
set port duplex
set port enable
set port speed
set port trap
show port