To specify the central office switch type on the ISDN interface, use the isdn switch-type global configuration command.
isdn switch-type switch-type
Syntax Description
switch-type Service provider switch type; see Table 27 for a list of supported switches. Default
The switch type Defaults to none, which disables the switch on the ISDN interface.
Command Mode
Global configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 10.0.
To disable the switch on the ISDN interface, specify isdn switch-type none.
Table 27 lists supported switch types by geographic area.
Table 27 ISDN Service Provider Switch Types
Keywords by Area Switch Type none No switch defined Australia basic-ts013 Australian TS013 switches Europe basic-1tr6 German 1TR6 ISDN switches basic-nwnet3 Norway NET3 switches (phase 1) basic-net3 NET3 ISDN switches (UK, Denmark, and other nations); covers the Euro-ISDN E-DSS1 signalling system primary-net5 NET5 switches (UK and Europe) vn2 French VN2 ISDN switches vn3 French VN3 ISDN switches Japan ntt Japanese NTT ISDN switches primary-ntt Japanese ISDN PRI switches North America basic-5ess AT&T basic rate switches basic-dms100 NT DMS-100 basic rate switches basic-ni1 National ISDN-1 switches primary-4ess AT&T 4ESS switch type for the U.S. (ISDN PRI only) primary-5ess AT&T 5ESS switch type for the U.S. (ISDN PRI only) primary-dms100 NT DMS-100 switch type for the U.S. (ISDN PRI only) New Zealand basic-nznet3 New Zealand Net3 switches Example
The following example configures the French VN3 ISDN switch type:
isdn switch-type vn3