Cisco Systems

 

Modules:  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  10  |  11  |  12  |  A1  |  All  |

Module 6: Bridges

Module Overview  
6.1 Bridge Connection
 
6.1.1 Introduction
6.1.2 Bridge roles in the network
6.1.3 Cable and power the bridge
6.1.4 LED indicators
6.1.5 Connecting to the bridge
6.1.6 Reset the bridge
6.2 Basic Configuration
 
6.2.1 Configure IP address and SSID through IPSU
6.2.2 Navigating the GUI
6.2.3 Configure basic settings through the GUI
6.2.4 Navigating the menu
6.2.5 Configure basic settings using the menu
6.3 Configuring the radio and Ethernet ports
 
6.3.1 Basic radio port configuration
6.3.2 Extended radio configuration – hardware page
6.3.3 Extended radio configuration – advanced page
6.3.4 Configuring the Ethernet port  – identification page
6.3.5 Configuring the Ethernet port  – hardware page
6.3.6 Configuring the Ethernet port  – advanced page
6.4 Configuring Services
 
6.4.1 Configuring time services
6.4.2 Configuring boot services
6.4.3 Configuring name services
6.4.4 Configuring routing setup
6.5 Cisco Services
 
6.5.1 Services overview
6.5.2 CDP
6.5.3 Firmware upgrade and distribution
6.5.4 Hot standby management
6.5.5 Manage system configuration
6.6 1400 Series Bridge
 
6.6.1 Overview
6.6.2 Models and options
6.6.3 Components and accessories
6.6.4 IOS features
Module Summary

Module Quiz

 
Close Window
All contents copyright © 2002 Cisco Systems, Inc. All rights reserved.