5.1 AP Installation  
  5.1.4 LED indicators  
The LED lights on an access point convey status information. When the access point is powering on, all three LEDs normally blink. After bootup, the colors of the LEDs represent the following:
  • Green LEDs indicate normal activity.
  • Amber LEDs indicate errors or warnings.
  • Red LEDs mean the unit is not operating correctly or is being upgraded.

Figure explains the meaning of each LED for the 1100 and 1200 access points.

 

Web Links

http://www.cisco.com/en/US/products/
hw/wireless/ps430/products_installation
_guide_chapter09186a0080184b55.html