|
|
2.3 | Physical Layer (PHY) | ||
| 2.3.3 | 802.11b modulation |
| This extension of the DSSS system builds
on the data rate capabilities of the original 802.11 standard, to
provide 5.5- Mbps and 11- Mbps payload data rates. The earlier 1-Mbps
and 2 -Mbps rates are still supported. To provide the higher rates,
8-chip complementary code keying (CCK) is employed as the modulation
scheme. The chipping rate is 11 MHz, which is the same as the DSSS
system, thus providing the same occupied channel bandwidth. The basic
High Rate PHY uses the same PLCP preamble and header as the DSSS PHY so
both PHYs can coexist in the same BSS.
In addition to providing higher speed extensions to the DSSS system, a number of optional features allow the performance of the radio frequency LAN system to be improved. The following optional functions have been defined:
|