Chapter 1. Notice

- Notice

Notice

Warning

This document should be used only as a glossary reference for possible commands. The listing of a command in this document does not guarantee that the command is available or supported for your platform or application.

The command information in this reference document is auto-generated from the NX-OS source code. While we attempt to manually remove unsupported, deprecated, or internal-use commands, such commands may occasionally appear in this document. Also, with the large variety of hardware platform combinations using NX-OS software, some listed commands may not be applicable or recommended for a specific platform. Platform-based dependency information is not provided in this command reference.

We strongly encourage you to refer to the configuration guides for appropriate commands to configure and operate a feature. Command limitations, restrictions, and recommendations are documented only in the configuration guides. When in doubt, please consult your Cisco representative.

Chapter 2. A Commands

- aaa accounting default

- aaa accounting onep default group

- aaa authentication login ascii-authentication

- aaa authentication login console

- aaa authentication login default

- aaa authentication login default fallback error local

- aaa authentication login enable

- aaa authentication login error-enable

- aaa authentication login invalid-username-log

- aaa authentication login password-aging enable

- aaa authentication onep default group

- aaa authentication rejected

- aaa authentication rejected in ban

- aaa authorization commands console

- aaa authorization commands default

- aaa authorization ssh default group

- aaa group server ldap

- aaa group server radius

- aaa group server tacacs

- aaa test-authentication

- aaa test-radius-authentication

- aaa user default-role

- abort

- abort

- abort

- absolute-timeout

- absolute start

- accept-lifetime month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l duration infinite month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l

- access-class

- access-class

- access-list

- access-list

- acllog debug ha restore_rt_cfg

- acllog match-log-level

- action

- action

- action cli

- action counter name value op

- action eem test

- action event-default

- action exceptionlog module syserr devid errtype errcode phylayer ports harderror

- action forceshut reset-reason

- action overbudgetshut

- action policy-default

- action publish-event sub-system type

- action reload

- action snmp-trap

- action syslog msg

- activate

- activate mode-100M

- activity-timer

- add cli commands

- additional-paths install backup

- additional-paths receive

- additional-paths selection route-map

- additional-paths send

- address-family ip address port

- address-family ipv4 labeled-unicast

- address-family ipv4 labeled-unicast

- address-family ipv4 mdt

- address-family ipv4 mdt

- address-family ipv4 mvpn

- address-family ipv4 mvpn

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv4 unicast

- address-family ipv6 labeled-unicast

- address-family ipv6 labeled-unicast

- address-family ipv6 mvpn

- address-family ipv6 mvpn

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family ipv6 unicast

- address-family l2vpn evpn

- address-family l2vpn evpn

- address-family l2vpn vpls

- address-family l2vpn vpls

- address-family link-state

- address-family link-state

- address-family vpnv4 unicast

- address-family vpnv4 unicast

- address-family vpnv6 unicast

- address-family vpnv6 unicast

- address

- address

- address

- address

- address

- address

- address port-number

- address primary

- address secondary

- address secondary

- adjacency-check

- adjacency-resolve

- advertise-labels

- advertise-map exist default advertise-map

- advertise-pip

- advertise-system-mac

- advertise l2vpn evpn

- advertisement-interval

- advertisement-interval

- afd queue-desired

- affinity-group

- affinity-group activate

- affinity

- affinity

- aggregate-address

- aggregate-address

- alert-group user-def-cmd

- allocate-label all

- allocate-label option-b

- allocate1 interface2

- allocate2 fcoe-vlan-range

- allocate3 shared interface3

- allow-vni-in-ethertag

- allow delete boot-image

- allow feature-set

- allowas-in

- allowas-in

- allowed-locators

- allowed-vlans

- amt flush-routes

- amt pseudo-interface

- analytics cluster

- anonymous-id

- append-after next

- apply profile

- area authentication

- area authentication

- area default-cost

- area default-cost

- area filter-list route-map in

- area filter-list route-map in

- area nssa

- area nssa

- area nssa translate type7 always never supress-fa

- area nssa translate type7 always never supress-fa

- area range

- area range

- area sham-link

- area stub

- area stub

- area virtual-link

- area virtual-link

- area virtual-link

- area virtual-link

- arp access-list

- as-format asdot

- as-override

- assign interface shared

- assign role permission

- assign vlan dedicated

- assign vrf prefix number dedicated

- attach console module

- attach fex

- attach module

- attach module node

- attach module port

- auth-mechanism plain

- authentication-check

- authentication-check

- authentication-check level-1

- authentication-check level-2

- authentication-key

- authentication-key

- authentication-key

- authentication-type cleartext

- authentication-type cleartext

- authentication-type cleartext

- authentication

- authentication

- authentication

- authentication

- authentication

- authentication

- authentication

- authentication bind

- authentication challenge

- authentication key-chain

- authentication key-chain

- authentication key-chain

- authentication key-chain

- authentication key-chain

- authentication key-chain

- authentication lifetime

- authentication text

- authentication type md5

- authentication window-size

- auto-bw

- auto-bw

- auto-bw timers frequency

- auto-cost reference-bandwidth

- auto-cost reference-bandwidth

- auto-recovery

- auto-remap-replication-servers

- autonomous-system

- autoroute announce

- autoroute metric

- autostate

- autovlan enable

- awk

aaa accounting default

[no] aaa accounting default { group <s0> [ <s1> [ <s2> [ <s3> [ <s4> [ <s5> [ <s6> [ <s7> ] ] ] ] ] ] ] [ local1 | none ] | local [ none1 ] | none2 }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

accounting

Configure accounting methods

default

Configure default methods

group

Specify server groups to redirect the accounting logs

s0

Server group name

s1

(Optional) Server group name

s2

(Optional) Server group name

s3

(Optional) Server group name

s4

(Optional) Server group name

s5

(Optional) Server group name

s6

(Optional) Server group name

s7

(Optional) Server group name

none

(Optional) No accounting

none1

(Optional) No accounting

none2

No accounting

local

Use local accounting

local1

(Optional) Use local accounting

Command Mode

- /exec/configure

aaa accounting onep default group

[no] aaa accounting onep default group <grp_name> +

Syntax Description

aaa

Configure aaa functions

accounting

configure accounting methods

grp_name

server group name

Command Mode

- /exec/configure

aaa authentication login ascii-authentication

[no] aaa authentication login ascii-authentication

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

ascii-authentication

enable ascii authentication

Command Mode

- /exec/configure

aaa authentication login console

[no] aaa authentication login console { group <s0> [ { local1 | none | <s1> [ { local1 | none | <s2> [ { local1 | none | <s3> [ { local1 | none | <s4> [ { local1 | none | <s5> [ { local1 | none | <s6> [ { local1 | none | <s7> [ { local1 | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

console

Configure console methods

group

Specify server groups

s0

Server group name

none

(Optional) No authentication

s1

(Optional) Server group name

none

(Optional) No authentication

s2

(Optional) Server group name

none

(Optional) No authentication

s3

(Optional) Server group name

none

(Optional) No authentication

s4

(Optional) Server group name

none

(Optional) No authentication

s5

(Optional) Server group name

none

(Optional) No authentication

s6

(Optional) Server group name

none

(Optional) No authentication

s7

(Optional) Server group name

none

(Optional) No authentication

local

Use local username authentication

local1

(Optional) Use local username authentication

none

No authentication

Command Mode

- /exec/configure

aaa authentication login default

[no] aaa authentication login default { group <s0> [ { local1 | none | <s1> [ { local1 | none | <s2> [ { local1 | none | <s3> [ { local1 | none | <s4> [ { local1 | none | <s5> [ { local1 | none | <s6> [ { local1 | none | <s7> [ { local1 | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

default

Configure default methods

group

Specify server groups

s0

Server group name

none

(Optional) No authentication

s1

(Optional) Server group name

none

(Optional) No authentication

s2

(Optional) Server group name

none

(Optional) No authentication

s3

(Optional) Server group name

none

(Optional) No authentication

s4

(Optional) Server group name

none

(Optional) No authentication

s5

(Optional) Server group name

none

(Optional) No authentication

s6

(Optional) Server group name

none

(Optional) No authentication

s7

(Optional) Server group name

none

(Optional) No authentication

local

Use local username authentication

local1

(Optional) Use local username authentication

none

No authentication

Command Mode

- /exec/configure

aaa authentication login default fallback error local

[no] aaa authentication login { default | console } fallback error local

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

default

Configure default methods

console

Configure console methods

fallback

Configure fallback behavior

error

Fallback in case all AAA servers configured for remote authentication are unreachable (Authentication error)

local

Fallback to local authentication

Command Mode

- /exec/configure

aaa authentication login enable

[no] aaa authentication login { mschap | mschapv2 | chap } enable

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

mschap

MSCHAP authentication for login

mschapv2

MSCHAP V2 authentication for login

chap

CHAP authentication for login

enable

enable the authentication for login

Command Mode

- /exec/configure

aaa authentication login error-enable

[no] aaa authentication login error-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

error-enable

enable display of error message on login failures

Command Mode

- /exec/configure

aaa authentication login invalid-username-log

[no] aaa authentication login invalid-username-log

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

invalid-username-log

enable invalid username log

Command Mode

- /exec/configure

aaa authentication login password-aging enable

[no] aaa authentication login password-aging enable

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

password-aging

password-aging authentication for login

enable

enable password-aging notification

Command Mode

- /exec/configure

aaa authentication onep default group

[no] aaa authentication onep default group <grp_name> +

Syntax Description

aaa

Configure aaa functions

authentication

Configure authentication methods

grp_name

server group name

Command Mode

- /exec/configure

aaa authentication rejected

[no] aaa authentication rejected

Syntax Description

no

Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

rejected

Set max number of fail attempts

Command Mode

- /exec/configure

aaa authentication rejected in ban

aaa authentication rejected <i1> in <i2> ban <i3>

Syntax Description

aaa

Configure aaa functions

authentication

Configure authentication methods

rejected

Set max number of fail attempts

i1

Fail attempts max value

in

Watch period for fail attempts

i2

Time period in seconds

ban

Block time period

i3

Time period in seconds

Command Mode

- /exec/configure

aaa authorization commands console

[no] aaa authorization { commands | config-commands } console { group <s0> [ { local | none | <s1> [ { local | none | <s2> [ { local | none | <s3> [ { local | none | <s4> [ { local | none | <s5> [ { local | none | <s6> [ { local | none | <s7> [ { local | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authorization

Configure authorization methods

commands

Authorization for all exec-mode commands

config-commands

Authorization for config commands

console

Configure methods console

group

Specify server groups

s0

Server group name

s1

(Optional) Server group name

s2

(Optional) Server group name

s3

(Optional) Server group name

s4

(Optional) Server group name

s5

(Optional) Server group name

s6

(Optional) Server group name

s7

(Optional) Server group name

local

(Optional) Use local RBACL based authorization

none

(Optional) No authorization

Command Mode

- /exec/configure

aaa authorization commands default

[no] aaa authorization { commands | config-commands } default { group <s0> [ { local | none | <s1> [ { local | none | <s2> [ { local | none | <s3> [ { local | none | <s4> [ { local | none | <s5> [ { local | none | <s6> [ { local | none | <s7> [ { local | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authorization

Configure authorization methods

commands

Authorization for all exec-mode commands

config-commands

Authorization for config commands

default

Configure default methods

group

Specify server groups

s0

Server group name

s1

(Optional) Server group name

s2

(Optional) Server group name

s3

(Optional) Server group name

s4

(Optional) Server group name

s5

(Optional) Server group name

s6

(Optional) Server group name

s7

(Optional) Server group name

local

(Optional) Use local RBACL based authorization

none

(Optional) No authorization

Command Mode

- /exec/configure

aaa authorization ssh default group

[no] aaa authorization { ssh-publickey | ssh-certificate } default { group <s0> [ { local1 | <s1> [ { local1 | <s2> [ { local1 | <s3> [ { local1 | <s4> [ { local1 | <s5> [ { local1 | <s6> [ { local1 | <s7> [ { local1 } ] } ] } ] } ] } ] } ] } ] } ] | local }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authorization

Configure authorization methods

ssh-publickey

Configure ssh publickey

ssh-certificate

Configure ssh certificate

default

Configure default ssh methods

group

Specify server groups

s0

Server group name

s1

(Optional) Server group name

s2

(Optional) Server group name

s3

(Optional) Server group name

s4

(Optional) Server group name

s5

(Optional) Server group name

s6

(Optional) Server group name

s7

(Optional) Server group name

local

Use local username authentication

local1

(Optional) Use local username authentication

Command Mode

- /exec/configure

aaa group server ldap

[no] aaa group server ldap <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

group

Configure aaa server group

server

Configure aaa server group

ldap

LDAP server group name

s0

LDAP server group name

Command Mode

- /exec/configure

aaa group server radius

[no] aaa group server radius <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

group

Configure aaa server group

server

Configure aaa server group

radius

RADIUS server group name

s0

RADIUS server group name

Command Mode

- /exec/configure

aaa group server tacacs

[no] aaa group server tacacs <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

group

Configure aaa server group

server

Configure aaa server group

tacacs

TACACS+ server group name

s0

TACACS+ server group name

Command Mode

- /exec/configure

aaa test-authentication

[no] aaa test-authentication

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

test-authentication

Test aaa authentication

Command Mode

- /exec/configure

aaa test-radius-authentication

[no] aaa test-radius-authentication

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

test-radius-authentication

Test aaa radius authentication

Command Mode

- /exec/configure

aaa user default-role

[no] aaa user default-role

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

user

Remotely authenticated user

default-role

Default role assigned by aaa-admin for remote authentication

Command Mode

- /exec/configure

abort

abort

Syntax Description

abort

Abort the current configuration session

Command Mode

- /exec/configure

abort

abort

Syntax Description

abort

abort itd session

Command Mode

- /exec/configure/itd-session-device-group

abort

abort

Syntax Description

abort

Exit region configuration mode, aborting changes

Command Mode

- /exec/configure/spanning-tree/mst/configuration

absolute-timeout

{ absolute-timeout <i0> | no absolute-timeout [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

absolute-timeout

Configure absolute timeout

i0

Enter timeout in minutes, 0 to disable

Command Mode

- /exec/configure/line

absolute start

{ [ <seqno> ] | no } absolute { start <stime> <sday> <smonth> <syear> [ end <etime> <eday> <emonth> <eyear> ] | end <etime> <eday> <emonth> <eyear> }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

absolute

Absolute time and date

start

Starting time and date

stime

Starting time

sday

Day of the month

smonth

Month

syear

Year

end

(Optional) Ending time and date

etime

(Optional) Ending time

eday

(Optional) Day of the month

emonth

(Optional) Month

eyear

(Optional) Year

Command Mode

- /exec/configure/timerange

accept-lifetime month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l duration infinite month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l

{ { accept-lifetime [ local ] <stime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <sday> <syear> { duration <dsec> | infinite | <etime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <eday> <eyear> } } | { no accept-lifetime [ [ local ] <stime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <sday> <syear> { duration <dsec> | infinite | <etime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <eday> <eyear> } ] } }

Syntax Description

no

Negate a command or set its defaults

accept-lifetime

Set accept lifetime of key

local

(Optional) Specify time in local timezone

stime

HH:MM:SS Time to start <0-23>:<0-59>:<0-59>

etime

HH:MM:SS Time to end <0-23>:<0-59>:<0-59>

month_a

month_b

month_c

month_d

month_e

month_f

month_g

month_h

month_i

month_j

month_k

month_l

sday

Day of the month to start

eday

Day of the month to end

syear

Year to start

eyear

Year to start

duration

Set key lifetime duration

dsec

Duration in seconds

infinite

Never Expires

Command Mode

- /exec/configure/keychain-key

access-class

{ access-class <aclname> } | { no access-class [ <aclname-ignore> ] }

Syntax Description

no

Negate a command or set its defaults

access-class

Filter incoming connections based on ACL

aclname

ACL name

aclname-ignore

(Optional) ACL name

Command Mode

- /exe/configure/onep/tls

access-class

[no] access-class <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

access-class

Specify IPv4 access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/line

access-list

[no] access-list <acl-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

access-list

ITD access-list name

acl-name

ITD user ACL name

Command Mode

- /exec/configure/itd

access-list

[no] access-list <acl-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

access-list

ITD access-list name

acl-name

ITD user ACL name

Command Mode

- /exec/configure/itd

acllog debug ha restore_rt_cfg

[no] acllog debug ha restore_rt_cfg

Syntax Description

no

(Optional) Negate a command or set its defaults

acllog

ACLLOG cli interface

debug

Debug utility

ha

Ha debug

restore_rt_cfg

Trigger dummy restore of runtime config

Command Mode

- /exec

acllog match-log-level

[no] acllog match-log-level <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

acllog

Configure ACL logging

match-log-level

acllog logging level

level

match log level

Command Mode

- /exec/configure

action

[no] action { drop [ log ] | forward | redirect <intf> }

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Specify the action clause

drop

Drop matched packets

log

(Optional) Log matched packets

forward

Forward matched packets

redirect

Redirect matched packets to the specified interface(s)

intf

Interface traffic is redirected to

Command Mode

- /exec/configure/vacl

action

[no] action <label>

Syntax Description

no

Negate a command or set its defaults

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

Command Mode

- /exec/configure/event-manager-applet

action cli

action <label> cli [ local ] <vsh_cmd>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

cli

Configure a VSH CLI action

local

(Optional) Execute the action in the same card on which the event happens

vsh_cmd

Enter the vsh command

Command Mode

- /exec/configure/event-manager-applet

action counter name value op

action <label> counter name <counter-name> value <counter-value> op <op-val>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

counter

Specify the name of the counter

name

Specify the name of the counter

counter-name

Name of the counter

value

Specify the value to be applied to the counter

counter-value

Enter an integer value or a $ prefixed name (parameter substitution)

op

Specify the operator to be applied

op-val

Enter the value of the operator

Command Mode

- /exec/configure/event-manager-applet

action eem test

action <label> eem test <param>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

eem

Event Manager command

test

Do test action

param

Test action parameter (dummy value)

Command Mode

- /exec/configure/event-manager-applet

action event-default

action <label> event-default

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

event-default

Do default action for the event

Command Mode

- /exec/configure/event-manager-applet

action exceptionlog module syserr devid errtype errcode phylayer ports harderror

[no] action <label> exceptionlog module <mod> syserr <syserr> devid <id> errtype <type> errcode <code> phylayer <phy> ports <list> harderror <hard> [ { desc <str> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

exceptionlog

Exception log

module

Enter a module number

mod

Enter module number (integer value) or a $ prefixed parameter name

syserr

Enter syserr

syserr

Enter syserr code (hex value) or a $ prefixed parameter name

devid

Enter device id

id

Enter device id (integer value) or a $ prefixed parameter name

errtype

Enter error type

type

Error error type (integer value) or a $ prefixed parameter name

errcode

Enter error code

code

Enter error code (hex value) or a $ prefixed parameter name

phylayer

Enter phy layer

phy

Enter phy layer (integer value) or a $ prefixed parameter name

ports

Enter failed ports

list

List of ports. Example: 1,3,7-15

harderror

Irrecoverable error?

hard

Error sub-category

desc

(Optional) Enter error description

str

(Optional) Error description

Command Mode

- /exec/configure/event-manager-applet

action forceshut reset-reason

[no] action <label2> forceshut [ { module { <module> | <mod-str> } | <s0> { <santa-cruz-range> | <santa-cruz-string> } } ] reset-reason <reset_reason_string>

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Configure the actions to be executed

label2

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

forceshut

Force the entire switch to shut down

module

(Optional) Optional. Module to be forced to shut down(optional argument)

module

(Optional) please enter the module number

mod-str

(Optional) Enter the module number (integer value) or a $ prefixed parameter name

s0

(Optional) Optional. Xbar to be forced to shut down(optional argument)

santa-cruz-range

(Optional) please enter the xbar number

santa-cruz-string

(Optional) Enter the xbar number (integer value) or a $ prefixed parameter name

reset-reason

Shut down (with reset-reason)

reset_reason_string

please enter reset_reason_string in quotes

Command Mode

- /exec/configure/event-manager-applet

action overbudgetshut

[no] action <label> overbudgetshut [ module { <module> | <mod-str> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

overbudgetshut

Shut down the specified LCs due to power over budget

module

(Optional) Optional. Module to be force-shut(optional arg)

module

(Optional) please enter the module number

mod-str

(Optional) Enter the module number (integer value) or a $ prefixed parameter name

Command Mode

- /exec/configure/event-manager-applet

action policy-default

action <label> policy-default

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

policy-default

Do default action(s) of the policy being overridden

Command Mode

- /exec/configure/event-manager-applet

action publish-event sub-system type

action <label> publish-event sub-system <sub-system-id> type <event-type> { [ arg1 <data1> ] [ arg2 <data2> ] [ arg3 <data3> ] [ arg4 <data4> ] }

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

publish-event

Publish an application specific event

sub-system

Sub-system ID to which the application event belongs

sub-system-id

Sub-system ID value

type

Event type value

event-type

Event type value

arg1

(Optional) User specified data to be passed when the event is published

data1

(Optional) User specified data value

arg2

(Optional) User specified data to be passed when the event is published

data2

(Optional) User specified data value

arg3

(Optional) User specified data to be passed when the event is published

data3

(Optional) User specified data value

arg4

(Optional) User specified data to be passed when the event is published

data4

(Optional) User specified data value

Command Mode

- /exec/configure/event-manager-applet

action reload

[no] action <label> reload [ module { <module> | <mod-str> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

reload

Reload the system or a specific module

module

(Optional) Reload a specific module

module

(Optional) please enter the module number

mod-str

(Optional) Enter the module number (integer value) or a $ prefixed parameter name

Command Mode

- /exec/configure/event-manager-applet

action snmp-trap

action <label> snmp-trap [ intdata1 <integer-data1> ] [ intdata2 <integer-data2> ] [ strdata <string-data> ]

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

snmp-trap

Send

intdata1

(Optional) Enter

integer-data1

(Optional) Integer

intdata2

(Optional) Enter

integer-data2

(Optional) Integer

strdata

(Optional) Enter

string-data

(Optional) String

Command Mode

- /exec/configure/event-manager-applet

action syslog msg

action <label> syslog [ priority { <prio> | <prio-str> } ] msg <msg-text>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

syslog

Generate a syslog message

priority

(Optional) Priority of the syslog message

prio

(Optional) Enter the priority

prio-str

(Optional) Enter a valid $ prefixed name, for parameter substitution

msg

Enter the message for the syslog

msg-text

The message text

Command Mode

- /exec/configure/event-manager-applet

activate

[no] activate

Syntax Description

no

(Optional) Negate a command or set its defaults

activate

Activate configured virtual service

Command Mode

- /exec/configure/virt-serv

activate mode-100M

[no] activate mode-100M

Syntax Description

no

(Optional) Negate a command or set its defaults

activate

Activate new mode

mode-100M

Activate mode-100M

Command Mode

- /exec/configure

activity-timer

{ [ no ] activity-timer <seconds> }

Syntax Description

no

(Optional) Negate a command or set its defaults

activity-timer

Number of seconds where a dynamic-EID is considered active

seconds

Timeout value in seconds

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

add cli commands

add cli commands <filename>

Syntax Description

add

add

cli

cli

commands

commands

filename

filename

Command Mode

- /exec

additional-paths install backup

[no] additional-paths install backup

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

install

Install backup path

backup

Install backup path

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6 /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn

additional-paths receive

[no] additional-paths receive

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

receive

Additional paths Receive capability

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

additional-paths selection route-map

[no] additional-paths selection route-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

selection

Additional paths selection

route-map

Route-map for additional paths selection

rmap-name

Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

additional-paths send

[no] additional-paths send

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

send

Additional paths Send capability

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

address-family ip address port

[no] { address-family | ip address } <ip4> port <portnum> [ protocol <proto> encoding <encoder> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Set destination IP address

ip

Set destination IPv4 address

address

IP address

port

Set destination port

protocol

(Optional) Set transport protocol

encoding

(Optional) Set encoding format

ip4

Destination IPv4 Address

portnum

Destination port

proto

(Optional)

encoder

(Optional)

Command Mode

- /exec/configure/telemetry/destination-group

address-family ipv4 labeled-unicast

{ [ no | default ] } address-family ipv4 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv4

Configure IPv4 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 labeled-unicast

[no] address-family ipv4 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

- /exec/configure/router-bgp

address-family ipv4 mdt

[no] address-family ipv4 mdt

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mdt

Configure Multicast Distribution Tree

Command Mode

- /exec/configure/router-bgp

address-family ipv4 mdt

{ [ no | default ] } address-family ipv4 mdt

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mdt

Configure Multicast Distribution Tree

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 mvpn

{ [ no | default ] } address-family ipv4 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mvpn

Configure Multicast VPN

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 mvpn

[no] address-family ipv4 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mvpn

Configure Multicast VPN

Command Mode

- /exec/configure/router-bgp

address-family ipv4 unicast

[no] { address-family ipv4 unicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure Address Family and its parameters

ipv4

Configure IPv4 Address Family parameters

unicast

Unicast

Command Mode

- /exec/configure/mpls_static

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure address family

ipv4

Configure IPv4 address family

unicast

Configure Unicast address family

Command Mode

- /exec/configure/vrf

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-rip

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-rip/router-rip-vrf

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv4 unicast

[no] address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

- /exec/configure/router-bgp

address-family ipv4 unicast

[no] address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf

address-family ipv4 unicast

{ [ no | default ] } address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv4

Configure IPv4 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 unicast

[ no | default ] address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv4

Configure IPv4 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

address-family ipv6 labeled-unicast

[no] address-family ipv6 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

- /exec/configure/router-bgp

address-family ipv6 labeled-unicast

{ [ no | default ] } address-family ipv6 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv6

Configure IPv6 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 mvpn

[no] address-family ipv6 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

mvpn

Configure Multicast VPN

Command Mode

- /exec/configure/router-bgp

address-family ipv6 mvpn

{ [ no | default ] } address-family ipv6 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

mvpn

Configure Multicast VPN

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 unicast

[no] address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

- /exec/configure/router-bgp

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure address family

ipv6

Configure IPv6 address family

unicast

Configure Unicast address family

Command Mode

- /exec/configure/vrf

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-rip

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-rip/router-rip-vrf

address-family ipv6 unicast

[no] { address-family ipv6 unicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure Address Family and its parameters

ipv6

Configure IPv6 Address Family parameters

unicast

Unicast

Command Mode

- /exec/configure/mpls_static

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure IPv6 unicast address-family

Command Mode

- /exec/configure/router-ospf3

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure IPv6 unicast address-family

Command Mode

- /exec/configure/router-ospf3/vrf

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv6 unicast

[no] address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf

address-family ipv6 unicast

{ [ no | default ] } address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv6

Configure IPv6 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 unicast

[ no | default ] address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv6

Configure IPv6 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

address-family l2vpn evpn

[no] address-family l2vpn evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

evpn

Configure L2VPN EVPN address-family

Command Mode

- /exec/configure/router-bgp

address-family l2vpn evpn

{ [ no | default ] } address-family l2vpn evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

evpn

Configure L2VPN EVPN address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family l2vpn vpls

[no] address-family l2vpn vpls

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

vpls

Configure L2VPN VPLS address-family

Command Mode

- /exec/configure/router-bgp

address-family l2vpn vpls

{ [ no | default ] } address-family l2vpn vpls

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

vpls

Configure L2VPN VPLS address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family link-state

[no] address-family link-state

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

link-state

Configure link-state address-family

Command Mode

- /exec/configure/router-bgp

address-family link-state

{ [ no | default ] } address-family link-state

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

link-state

Configure link-state address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv4 unicast

{ [ no | default ] } address-family vpnv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

vpnv4

Configure IPv4 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv4 unicast

[no] address-family vpnv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

vpnv4

Configure IPv4 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

- /exec/configure/router-bgp

address-family vpnv6 unicast

[no] address-family vpnv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

vpnv6

Configure IPv6 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

- /exec/configure/router-bgp

address-family vpnv6 unicast

{ [ no | default ] } address-family vpnv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

vpnv6

Configure IPv6 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address

[no] address <ip_addr> [ primary ]

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

primary

(Optional) Primary Address

ip_addr

IPv4 Address

Command Mode

- /exec/configure/if-eth-any/vrrpv3_ipv4

address

[no] address <start-ip> <end-ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

Address range for the pool

start-ip

Start IP address

end-ip

End IP address

Command Mode

- /exec/configure/ipnat-pool

address

{ address <ip_address> | no address [ <ip_address> ] }

Syntax Description

no

Negate a command or set its defaults

address

Add an IP address to the vr

ip_address

ip address

Command Mode

- /exec/configure/if-eth-any/vrrp

address

[no] address <ipv6_addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

Command Mode

- /exec/configure/if-eth-any/vrrpv3_ipv6

address

[no] address <ip_addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address configuration

ip_addr

IP Address

Command Mode

- /exec/configure/if-eth-any/vrrs

address

[no] address <ipv6_addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address configuration

Command Mode

- /exec/configure/if-eth-any/vrrs

address port-number

address { <ipv4-addr> | <ipv6-addr> } port-number <port-number> | no address

Syntax Description

no

Negate a command or set its defaults

address

Configure IPv4 or IPv6 address

ipv4-addr

IPv4 address of the BMP server

port-number

Configure the port for the BMP server

port-number

Port number value

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

address primary

[no] address <ipv6_addr> primary

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

primary

Primary Address

Command Mode

- /exec/configure/if-eth-any/vrrpv3_ipv6

address secondary

{ address <ip_address> secondary | no address <ip_address> secondary }

Syntax Description

no

Negate a command or set its defaults

address

Add an IP address to the vr

ip_address

ip address

secondary

a virtual IP address without owner

Command Mode

- /exec/configure/if-eth-any/vrrp

address secondary

[no] address <ip_addr> secondary

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

secondary

Secondary Address

ip_addr

IPv4 Address

Command Mode

- /exec/configure/if-eth-any/vrrpv3_ipv4

adjacency-check

[no] adjacency-check

Syntax Description

no

(Optional) Negate a command or set its defaults

adjacency-check

Adjacency's protocol support consistency check

Command Mode

- /exec/configure/router-isis/router-isis-af-common

adjacency-resolve

[no] adjacency-resolve

Syntax Description

no

(Optional) Negate a command or set its defaults

adjacency-resolve

Resolve L3->L2 address for ISIS adjacency

Command Mode

- /exec/configure/router-isis

advertise-labels

[no] advertise-labels [ vrf { <vrf-name> | <vrf-known-name> } ] [ [ for <pfx-list> [ to <peer-pfx-list> ] ] | [ interface <intf> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise-labels

Label advertisements

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

for

(Optional) Prefix list specifying controls on destination prefixes

pfx-list

(Optional) Name of prefix list

to

(Optional) Prefix list specifying controls on LDP peers

peer-pfx-list

(Optional) Name of prefix list

interface

(Optional) Advertise /32 interface address

intf

(Optional)

Command Mode

- /exec/configure/ldp

advertise-map exist default advertise-map

{ [ no ] advertise-map <advt-rmap-name> { exist-map | non-exist-map } <cond-rmap-name> } | default advertise-map

Syntax Description

no

(Optional) Negate a command or set its defaults

default

Inherit values from a peer template

advertise-map

Specify route-map for conditional advertisement

exist-map

Condition route-map to advertise only when prefix in condition exists

non-exist-map

Condition route-map to advertise only when prefix in condition does not exist

advt-rmap-name

Route-map name

cond-rmap-name

Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

advertise-pip

[no] advertise-pip

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise-pip

advertise physical ip for type-5 route

Command Mode

- /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

advertise-system-mac

[no] advertise-system-mac

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise-system-mac

Advertise extra EVPN RT-2 with system MAC

Command Mode

- /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

advertise l2vpn evpn

[no] advertise l2vpn evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise

Configure advertise for this AF

l2vpn

L2VPN

evpn

EVPN

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

advertisement-interval

[no] advertisement-interval <adv-sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

advertisement-interval

Minimum interval between sending BGP routing updates

adv-sec

Time in seconds

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6

advertisement-interval

{ advertisement-interval <interval_time> | no advertisement-interval [ <interval_time> ] }

Syntax Description

no

Negate a command or set its defaults

advertisement-interval

Set the time interval between advertisement

interval_time

Time interval (in seconds) between advertisements

Command Mode

- /exec/configure/if-eth-any/vrrp

afd queue-desired

[no] afd queue-desired <q-desired> { bytes | kbytes | mbytes } [ ecn ]

Syntax Description

no

(Optional) Negate a command or set its defaults

afd

Configure AFD parameters

queue-desired

Specify Queue Desired for AFD

bytes

Bytes

kbytes

Kilo bytes

mbytes

Mega bytes

ecn

(Optional) ECN

Command Mode

- /exec/configure/policy-map/type/queuing/class

affinity-group

{ affinity-group <affinity_group_id> } | { { no | default } affinity-group [ <affinity_group_id> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

affinity-group

Configure an affinity group

affinity_group_id

Affinity Group ID

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

affinity-group activate

affinity-group activate <affinity_group_id> | no affinity-group activate [ <affinity_group_id> ]

Syntax Description

no

Negate a command or set its defaults

affinity-group

Configure an affinity group

activate

Activate the affinity group

affinity_group_id

AFFINITY Group ID

Command Mode

- /exec/configure/router-bgp

affinity

[no] affinity | affinity <value> [ mask <mask-value> ]

Syntax Description

no

Negate a command or set its defaults

affinity

desired link attributes for links comprising tunnel

value

affinity value

mask

(Optional) mask on desired link attributes

mask-value

(Optional) affinity mask value

Command Mode

- /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

affinity

[no] affinity | affinity <hex_value> [ mask <mask_value> ]

Syntax Description

no

Negate a command or set its defaults

affinity

Specify attribute flags for links comprising LSP

hex_value

affinity value

mask

(Optional) mask on desired link attributes

mask_value

(Optional) affinity mask value

Command Mode

- /exec/configure/te/lsp-attr

aggregate-address

[no] aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } [ as-set | summary-only | suppress-map <suppress-rmap> | advertise-map <advertise-rmap> | attribute-map <attribute-rmap> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

aggregate-address

Configure BGP aggregate prefixes

ip-addr

Aggregate address

ip-mask

Aggregate mask

ip-prefix

Aggregate prefix

summary-only

(Optional) Don't advertise more specifics

as-set

(Optional) Generate AS-SET information

suppress-map

(Optional) Conditionally filter more specific routes

advertise-map

(Optional) Select attribute information from specific routes

attribute-map

(Optional) Set attribute information of aggregate

advertise-rmap

(Optional) Route-map name

suppress-rmap

(Optional) Route-map name

attribute-rmap

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

aggregate-address

[no] aggregate-address <ipv6-prefix> [ as-set | summary-only | suppress-map <suppress-rmap> | advertise-map <advertise-rmap> | attribute-map <attribute-rmap> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

aggregate-address

Configure BGP aggregate IPv6 prefixes

as-set

(Optional) Generate AS-SET information

summary-only

(Optional) Don't advertise more specifics

suppress-map

(Optional) Conditionally filter more specific routes

advertise-map

(Optional) Select attribute information from specific routes

attribute-map

(Optional) Set attribute information of aggregate

advertise-rmap

(Optional) Route-map name

suppress-rmap

(Optional) Route-map name

attribute-rmap

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

alert-group user-def-cmd

[no] alert-group { Configuration | Diagnostic | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test } user-def-cmd <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

alert-group

alert group

user-def-cmd

configure a cli command for an alert group

s0

A valid CLI command

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

Command Mode

- /exec/configure/callhome

allocate-label all

[no] allocate-label { all | route-map <rmap-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

allocate-label

Configure label allocation for this AF

all

Allocate labels for all routes

route-map

Allocate labels for selected routes

rmap-name

Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6 /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-af-ipv4

allocate-label option-b

[no] allocate-label option-b

Syntax Description

no

(Optional) Negate a command or set its defaults

allocate-label

Allow allocation of labels

option-b

Allow allocation of option B labels

Command Mode

- /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6

allocate1 interface2

allocate1 interface2 { <interface-id> [ force ] | unallocated-interfaces }

Syntax Description

allocate1

Assign interfaces to vdc

interface2

Assign interface range to vdc

interface-id

Assign interface range to vdc

force

(Optional) force

unallocated-interfaces

Best-effort trying to move all interfaces in the unallocated pool into this vdc

Command Mode

- /exec/configure/vdc

allocate2 fcoe-vlan-range

{ allocate2 fcoe-vlan-range [ <vlan_range> ] [ from vdcs <vdc_names> ] } | { no allocate2 fcoe-vlan-range [ <vlan_range> | { from vdcs <vdc_names> } ] }

Syntax Description

no

Negate a command or set its defaults

allocate2

Assign interfaces to vdc

fcoe-vlan-range

vlans reserved for FCoE

vlan_range

(Optional) vlans reserved for FCoE

from

(Optional) which vdcs will be sharing ports with the FCoE vdc

vdcs

(Optional) which vdcs will be sharing ports with the FCoE vdc

vdc_names

(Optional) which vdcs will be sharing porst with the FCoE vdc

Command Mode

- /exec/configure/vdc

allocate3 shared interface3

[no] allocate3 shared interface3 <sinterface-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

allocate3

Assign interfaces to vdc

interface3

Assign interface range to vdc

sinterface-id

Assign interface range to vdc

shared

Shared this port using the reserved FCoE vlans

Command Mode

- /exec/configure/vdc

allow-vni-in-ethertag

[no] allow-vni-in-ethertag

Syntax Description

no

(Optional) Negate a command or set its defaults

allow-vni-in-ethertag

Allow VNI in Ethernet Tag field in EVPN route

Command Mode

- /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

allow delete boot-image

[no] allow delete boot-image [ retain ]

Syntax Description

no

(Optional) Negate a command or set its defaults

allow

allow kickstart or system image to be deleted

delete

allow delete or overwrite of image file

boot-image

image file

retain

(Optional) retain this command after reboot

Command Mode

- /exec

allow feature-set

[no] allow feature-set <fs>

Syntax Description

no

(Optional) Negate a command or set its defaults

allow

Used to change permisions inside a vdc

feature-set

Change which feature-sets the user is able to enable inside the vdc

fs

installed feature-sets

Command Mode

- /exec/configure/vdc

allowas-in

[ no | default ] allowas-in [ <allowas-in-cnt> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

allowas-in

Accept as-path with my AS present in it

allowas-in-cnt

(Optional) Number of occurrences of AS number, default is 3

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

allowas-in

[ no | default ] allowas-in [ <allowas-in-cnt> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

allowas-in

Accept as-path with my AS present in it

allowas-in-cnt

(Optional) Number of occurrences of AS number, default is 3

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

allowed-locators

{ [ no ] allowed-locators { <rloc> | <rloc6> } + }

Syntax Description

no

(Optional) Negate a command or set its defaults

allowed-locators

List of locators from LISP site

rloc

IPv4 locator allowed in registered locator-set

Command Mode

- /exec/configure/lisp-site /exec/configure/vrf/lisp-site

allowed-vlans

allowed-vlans { <allow-vlans> | add <add-vlans> | except <except-vlans> | remove <remove-vlans> | all }

Syntax Description

allowed-vlans

Set list of allowed vlans that can be used for interface configuration

allow-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

add

add VLANs to the current list

add-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

except

all VLANs except the following

except-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

remove

remove VLANs from the current list

remove-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

all

all VLANs

Command Mode

- /exec/configure/vmt-conn

amt flush-routes

[no] amt flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

amt

AMT global configuration commands

flush-routes

Remove routes when restarting AMT

Command Mode

- /exec/configure /exec/configure/vrf

amt pseudo-interface

{ { amt pseudo-interface <interface> } | { no amt pseudo-interface [ <interface> ] } }

Syntax Description

no

Negate a command or set its defaults

amt

AMT global configuration commands

pseudo-interface

Tunnel to relay for forwarding IGMP/MLD messages

interface

Intername name to used for AMT pseudo interface

Command Mode

- /exec/configure /exec/configure/vrf

analytics cluster

[no] analytics cluster <clustername> [ vrf <vrfName> ] [ srcIf <src_intf> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

analytics

Feature Analytics

cluster

Analytics cluster

clustername

Cluster name

vrf

(Optional) VRF Name

vrfName

(Optional) VRF name

srcIf

(Optional) Source Interface

src_intf

(Optional) Source Interface

Command Mode

- /exec/configure

anonymous-id

{ [ no ] anonymous-id <id> }

Syntax Description

anonymous-id

anonymous identity associated with this profile

id

identity name

Command Mode

- /exec/configure/dot1x-cred

append-after next

append-after <index> { next-address [ loose | strict ] <ipaddr> | exclude-address <ipaddr> }

Syntax Description

append-after

Append additional entry after specified index

index

Previous index number

next-address

Specify the next address in the path

loose

(Optional) Target address is loose

strict

(Optional) Target address is strict

exclude-address

Exclude an address from subsequent partial path segments

ipaddr

Enter IP address (A.B.C.D)

Command Mode

- /exec/configure/te/expl-path

apply profile

[no] apply profile { <all_conf_profile_name> } [ include-profile <include-profile> ] [ { param-instance <plistinst> | include-instance <plistinst> } + ]

Syntax Description

no

(Optional) Negate a command or set its defaults

apply

Apply a config-profile

profile

Apply a config-profile

all_conf_profile_name

Enter the name of the profile

param-instance

(Optional) Enter the name of the param-instance

plistinst

(Optional) Enter the name of the instance

include-profile

(Optional) Enter the name of the include profile

include-profile

(Optional) Enter the name of the include profile

include-instance

(Optional) Enter the param-instance corresponding to the first included profile

plistinst

(Optional) Enter the name of the include instance

Command Mode

- /exec/configure

area authentication

area <area-id-ip> authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> } } | no area <area-id-ip> authentication { disable | ipsec spi <spi_id> }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

authentication

Enable Authentication

disable

Disable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area authentication

[no] area <area-id-ip> authentication [ message-digest ]

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

authentication

Enable authentication for the area

message-digest

(Optional) Use message-digest authentication

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area default-cost

{ { area <area-id-ip> default-cost <cost> } | { no area <area-id-ip> default-cost [ <cost> ] } }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

default-cost

Specify default-cost for default summary LSA

cost

Cost value

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area default-cost

{ { area <area-id-ip> default-cost <cost> } | { no area <area-id-ip> default-cost [ <cost> ] } }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

default-cost

Specify default-cost for default inter-area-prefix LSA

cost

Cost value

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area filter-list route-map in

{ area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } { in | out } } | { no area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } [ in | out ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

route-map

Name of filter policy

policy-name

Route-map name

rtr_pol_name

An existing routing-rules policy

in

Filter networks sent to this area

out

Filter networks sent from this area

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area filter-list route-map in

{ area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } { in | out } } | { no area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } [ in | out ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

route-map

Name of filter policy

policy-name

Route-map name

rtr_pol_name

An existing routing-rules policy

in

Filter networks sent to this area

out

Filter networks sent from this area

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa

[no] area <area-id-ip> nssa { [ no-summary ] [ no-redistribution ] [ default-information-originate [ route-map <policy-name> ] ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

no-summary

(Optional) Do not send summary LSAs into NSSA area

no-redistribution

(Optional) Do not send redistributed LSAs into NSSA area

default-information-originate

(Optional) Originate Type-7 default LSA into NSSA area

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa

[no] area <area-id-ip> nssa { [ no-summary ] [ no-redistribution ] [ default-information-originate [ route-map <policy-name> ] ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

no-summary

(Optional) Do not send summary LSAs into NSSA area

no-redistribution

(Optional) Do not send redistributed LSAs into NSSA area

default-information-originate

(Optional) Originate Type-7 default LSA into NSSA area

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area nssa translate type7 always never supress-fa

{ area <area-id-ip> nssa translate type7 { always [ supress-fa ] | never | supress-fa } } | { no area <area-id-ip> nssa translate type7 [ always [ supress-fa ] | never | supress-fa ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

translate

Translate LSA

type7

From Type 7 to Type 5

always

Always translate LSAs

never

Never translate LSAs

supress-fa

(Optional) Supress forwarding address in translated LSAs

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa translate type7 always never supress-fa

{ area <area-id-ip> nssa translate type7 { always [ supress-fa ] | never | supress-fa } } | { no area <area-id-ip> nssa translate type7 [ always [ supress-fa ] | never | supress-fa ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

translate

Translate LSA

type7

From NSSA-external (Type 7) to AS-external (Type 5)

always

Always translate LSAs

never

Never translate LSAs

supress-fa

(Optional) Supress forwarding address in translated LSAs

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area range

[no] area <area-id-ip> range { <ip-dest> <ip-mask> | <ip-prefix> } { [ not-advertise ] [ cost <conf-cost> ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

range

Configure an address range for an area

ip-dest

IP prefix format: i.i.i.i

ip-mask

IP network mask format: m.m.m.m

ip-prefix

IP prefix format: x.x.x.x/ml

not-advertise

(Optional) Suppress advertising the specified range

cost

(Optional) Cost to use for range

conf-cost

(Optional) Cost value

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area range

[no] area <area-id-ip> range <ipv6-prefix> { [ not-advertise ] [ cost <conf-cost> ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

range

Configure an address range for an area

not-advertise

(Optional) Suppress advertising the specified range

cost

(Optional) Cost to use for range

conf-cost

(Optional) Cost value

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area sham-link

[no] area <area-id-ip> sham-link <source-address> <dest-address>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

sham-link

Define a sham link and its parameters

source-address

IP addr associated with sham-link source

dest-address

IP addr associated with sham-link destination

Command Mode

- /exec/configure/router-ospf/vrf

area stub

[no] area <area-id-ip> stub [ no-summary ]

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

stub

Configure area as a stub

no-summary

(Optional) Prevent ABR from sending summary LSAs into stub area

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area stub

[no] area <area-id-ip> stub [ no-summary ]

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

stub

Configure area as a stub

no-summary

(Optional) Prevent ABR from sending summary LSAs into stub area

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

- /exec/configure/router-ospf/vrf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

- /exec/configure/router-ospf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

- /exec/configure/router-ospf3

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

- /exec/configure/router-ospf3/vrf

arp access-list

[no] arp access-list <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

arp

ARP access-list configuration commands

access-list

Configure access list

name

List name

Command Mode

- /exec/configure

as-format asdot

as-format asdot | no as-format

Syntax Description

no

Negate a command or set its defaults

as-format

Configure the router's Autonomous system number (ASN) notation

asdot

Specifies the Autonomous system number (ASN) notation to asdot format

Command Mode

- /exec/configure

as-override

[ no | default ] as-override

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

as-override

Override matching AS-number while sending update

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

assign interface shared

{ assign interface { <sdn-eth-intf-list> | <sdn-pc-intf-list> } shared | no assign interface { <sdn-eth-intf-list> | <sdn-pc-intf-list> } }

Syntax Description

no

Negate a command or set its defaults

assign

Assign resource

interface

Resource of interface type

sdn-eth-intf-list

List of Interfaces

sdn-pc-intf-list

List of Interfaces

shared

Share interface with controller

Command Mode

- /exec/configure/controller-type

assign role permission

{ assign role <role> permission <permission> | no assign role [ <role> permission <permission> ] }

Syntax Description

no

Negate a command or set its defaults

assign

Assign role

role

Controller role

role

Role name

permission

VLAN permissions

permission

Permissionsions under role

Command Mode

- /exec/configure/controller-type

assign vlan dedicated

{ assign vlan <sdn-id> dedicated | no assign vlan <sdn-id> }

Syntax Description

no

Negate a command or set its defaults

assign

Assign reservation

vlan

Controller VLANs

sdn-id

vlan ID 2-4093 or range(s): 1-5, 10 or 2-5,7-19

dedicated

Dedicated VLANs

Command Mode

- /exec/configure/controller-type

assign vrf prefix number dedicated

{ assign vrf prefix <prefix-name> number <number-of-vrfs> dedicated | no assign vrf }

Syntax Description

no

Negate a command or set its defaults

assign

Assign reservation

vrf

VRFs

prefix

VRF prefix

prefix-name

String description of the prefix

number

Number of VRFs

number-of-vrfs

VRF ID range from 1 to 4095

dedicated

Dedicated VRFs

Command Mode

- /exec/configure/controller-type

attach console module

attach console module <module>

Syntax Description

attach

Connect to a specific linecard

console

Connect to the console

module

Connect to the module console

module

Enter module number

Command Mode

- /exec

attach fex

attach fex <chas_no>

Syntax Description

attach

Connect to module

fex

Connect to FEX

chas_no

FEX number

Command Mode

- /exec

attach module

attach module <module>

Syntax Description

attach

Connect to a specific linecard

module

Module number of the linecard

module

Enter module number

Command Mode

- /exec

attach module node

attach module <module> node <i0>

Syntax Description

attach

Connect to a specific linecard

module

Module number of the linecard

module

Enter module number

node

Avanti node number on the linecard

i0

Command Mode

- /exec

attach module port

attach module <module> port <i0>

Syntax Description

attach

Connect to a specific linecard

module

Module number of the linecard

module

Enter module number

port

Port number on the linecard

i0

Command Mode

- /exec

auth-mechanism plain

[no] auth-mechanism { plain }

Syntax Description

no

(Optional) Negate a command or set its defaults

auth-mechanism

Set the authentication mechanism

plain

Set the authentication mechanism as plain(default)

Command Mode

- /exec/configure/ldap

authentication-check

[no] authentication-check

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication-check

[no] authentication-check

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

authentication-check level-1

[no] authentication-check level-1

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

level-1

Specify authentication check for level-1 LSP, CSNP and PSNP

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

authentication-check level-2

[no] authentication-check level-2

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

level-2

Specify authentication check for level-2 LSP, CSNP and PSNP

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

authentication-key

{ { authentication-key <key> } | { no authentication-key [ <key> ] } }

Syntax Description

no

Negate a command or set its defaults

authentication-key

Configure the authentication key for the sham-link

key

Authentication key

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

authentication-key

{ { authentication-key <key> } | { no authentication-key [ <key> ] } }

Syntax Description

no

Negate a command or set its defaults

authentication-key

Configure the authentication key for the virtual-link

key

Authentication key

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication-key

{ [ no ] authentication-key <key> }

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-key

Authentication key used by LISP site

key

SHA-1 password

Command Mode

- /exec/configure/lisp-site /exec/configure/vrf/lisp-site

authentication-type cleartext

{ authentication-type { cleartext | md5 } | no authentication-type [ { cleartext | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

authentication-type

Set authentication type

cleartext

Cleartext

md5

HMAC-MD5

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

authentication-type cleartext

{ authentication-type { cleartext | md5 } <level> | no authentication-type [ { cleartext | md5 } ] <level> }

Syntax Description

no

Negate a command or set its defaults

authentication-type

Set authentication type

cleartext

Cleartext

md5

HMAC-MD5

level

IS-IS level

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

authentication-type cleartext

{ authentication-type { cleartext | md5 } | no authentication-type [ { cleartext | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

authentication-type

Set authentication type

cleartext

Cleartext

md5

HMAC-MD5

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication

authentication { [ text ] <secret> | md5 { key-chain <chain-name> | key-string [ 0 | 7 ] <key-name> [ compatibility ] [ timeout <sec> ] } } | no authentication

Syntax Description

no

Negate a command or set its defaults

authentication

Authentication

text

(Optional) Plain text authentication

secret

Plain text authentication string

md5

Use MD5 authentication

key-chain

Set key chain

chain-name

Name of key-chain

key-string

Set key string

0

(Optional) Specifies an UNENCRYPTED key string will follow

7

(Optional) Specifies a HIDDEN key string will follow

key-name

Key string (64 chars max)

compatibility

(Optional) Operate in compatibility mode for MD5 type-7 authentication

timeout

(Optional) Set timeout

sec

(Optional) (0-32767)Timeout until only accepting new key (seconds)

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

authentication

[no] authentication [ message-digest | null ]

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Authentication on the vlink

message-digest

(Optional) Use message-digest authentication

null

(Optional) Use null(disable) authentication

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication

[no] authentication [ message-digest | null ]

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Authentication on the slink

message-digest

(Optional) Use message-digest authentication

null

(Optional) Use null(disable) authentication

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

authentication

authentication { { md5 { { key-chain <word-chain> } | { key-string [ encrypted ] <word-string> } } } | { text <word-text> } } | no authentication

Syntax Description

no

Negate a command or set its defaults

authentication

Configure authentication

md5

MD5 authentication

key-chain

MD5 Key-chain authentication

word-chain

MD5 authentication key-chain

key-string

MD5 keyed authentication

encrypted

(Optional) Specifies an encrypted key will follow

word-string

MD5 authentication key

text

Plain text authentication

word-text

Plain text

Command Mode

- /exec/configure/if-eth-any/glbp

authentication

authentication { ipsec spi <spi_id> { md5 <akey> | sha1 <akey> } } | no authentication ipsec spi <spi_id>

Syntax Description

no

Negate a command or set its defaults

authentication

Enable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

authentication

authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> } } | no authentication { disable | ipsec spi <spi_id> }

Syntax Description

no

Negate a command or set its defaults

authentication

Enable Authentication

disable

Disable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

Command Mode

- /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

authentication

[no] authentication { { key-chain <chain> } | { mode md5 } }

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Configures EIGRP authentication subcommands

key-chain

key-chain

chain

name of key-chain

mode

mode

md5

Keyed message digest

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

authentication bind

[no] authentication { bind-first [ append-with-basedn <s1> ] | compare [ password-attribute <s0> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Set the authentication method

bind-first

Set the authentication method to bind-first

append-with-basedn

(Optional) Change the default value (cn=$userid)

s1

(Optional) append with dn value

compare

Change the default attribute

password-attribute

(Optional) Change the default password attribute (userPassword)

s0

(Optional) password attribute

Command Mode

- /exec/configure/ldap

authentication challenge

[no] authentication [ neighbor <nbr> ] challenge

Syntax Description

authentication

Configure RSVP neighbor cryptographic authentication

neighbor

(Optional) Configure RSVP neighbor

nbr

(Optional) RSVP Neighbor address

challenge

Perform challenge/response handshake with new RSVP neighbors

Command Mode

- /exec/configure/ip-rsvp

authentication key-chain

{ authentication key-chain <auth-keychain> | no authentication key-chain [ <auth-keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Set authentication keychain string

key-chain

Set authentication keychain string

auth-keychain

authentication keychain

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

authentication key-chain

{ authentication key-chain <keychain> } | { no authentication key-chain [ <keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Authentication on the vlink

key-chain

Authentication password key-chain

keychain

Key-chain name

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication key-chain

{ authentication key-chain <keychain> } | { no authentication key-chain [ <keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Authentication on the slink

key-chain

Authentication password key-chain

keychain

Key-chain name

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

authentication key-chain

{ authentication key-chain <auth-keychain> <level> | no authentication key-chain [ <auth-keychain> ] <level> }

Syntax Description

no

Negate a command or set its defaults

authentication

Set authentication keychain string

key-chain

Set authentication keychain string

auth-keychain

authentication keychain

level

IS-IS level

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

authentication key-chain

authentication [ neighbor <nbr> ] key-chain <key-chain-name> | no authentication [ neighbor <nbr> ] key-chain

Syntax Description

authentication

Configure RSVP neighbor cryptographic authentication

neighbor

(Optional) Configure RSVP neighbor

nbr

(Optional) RSVP Neighbor address

key-chain

Authentication password key-chain

key-chain-name

Key-chain name

Command Mode

- /exec/configure/ip-rsvp

authentication key-chain

{ authentication key-chain <auth-keychain> | no authentication key-chain [ <auth-keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Set authentication keychain string

key-chain

Set authentication keychain string

auth-keychain

authentication keychain

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication lifetime

[no] authentication [ neighbor <nbr> ] lifetime <time>

Syntax Description

authentication

Configure RSVP neighbor cryptographic authentication

neighbor

(Optional) Configure RSVP neighbor

nbr

(Optional) RSVP Neighbor address

lifetime

Maximum lifetime of neighbor authentication state

time

Lifetime value(in seconds)

Command Mode

- /exec/configure/ip-rsvp

authentication text

{ authentication text <authentication_pwd> | no authentication [ text <authentication_pwd> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Select authentication method

text

Set the authentication password (8 char max)

authentication_pwd

Command Mode

- /exec/configure/if-eth-any/vrrp

authentication type md5

[no] authentication [ neighbor <nbr> ] type { md5 | sha-1 }

Syntax Description

authentication

Configure RSVP neighbor cryptographic authentication

neighbor

(Optional) Configure RSVP neighbor

nbr

(Optional) RSVP Neighbor address

type

Type of authentication algorithm

md5

RSA Message Digest 5 hash algorithm (default)

sha-1

NIST Secure Hash Algorithm 1

Command Mode

- /exec/configure/ip-rsvp

authentication window-size

[no] authentication [ neighbor <nbr> ] window-size <value>

Syntax Description

authentication

Configure RSVP neighbor cryptographic authentication

neighbor

(Optional) Configure RSVP neighbor

nbr

(Optional) RSVP Neighbor address

window-size

Receive window size for authenticated messages

value

Maximum number of messages allowed in receive window

Command Mode

- /exec/configure/ip-rsvp

auto-bw

[no] auto-bw | auto-bw [ { [ collect-bw | frequency <sec> ] + } | { [ frequency <sec> | min-bw <min-kbps> | max-bw <max-kbps> ] + } ]

Syntax Description

no

Negate a command or set its defaults

auto-bw

Specify mpls tunnel should automatically change bw

collect-bw

(Optional) Just collect Bandwidth info on this tunnel

frequency

(Optional) Frequency to change tunnel BW

sec

(Optional) seconds between applying auto-bw

max-bw

(Optional) Set the Maximum Bandwidth for auto-bw on this tunnel

max-kbps

(Optional) Maximum kb/s that tunnel can be auto set to

min-bw

(Optional) Set the Minimum Bandwidth for auto-bw on this tunnel

min-kbps

(Optional) Min kb/s that tunnel can be auto set to

Command Mode

- /exec/configure/if-te

auto-bw

[no] auto-bw | auto-bw [ { [ collect-bw | frequency <sec> ] + } | { [ frequency <sec> | min-bw <min-kbps> | max-bw <max-kbps> ] + } ]

Syntax Description

no

Negate a command or set its defaults

auto-bw

Specify automatic bandwidth configuration

collect-bw

(Optional) Just collect bandwidth info

frequency

(Optional) frequency to change LSP bandwidth

sec

(Optional) seconds between applying auto-bw

max-bw

(Optional) Set the maximum bandwidth for auto-bw

max-kbps

(Optional) Maximum bandwidth to apply (kbps)

min-bw

(Optional) Set the minimum bandwidth for auto-bw

min-kbps

(Optional) Minimum bandwidth to apply (kbps)

Command Mode

- /exec/configure/te/lsp-attr

auto-bw timers frequency

[no] auto-bw timers { frequency } | auto-bw timers { frequency <sec> }

Syntax Description

no

Negate a command or set its defaults

auto-bw

auto-bw parameters

timers

Enable auto-bw timers

frequency

Interval between auto-bw data collection

sec

Seconds between auto-bw data collection

Command Mode

- /exec/configure/te

auto-cost reference-bandwidth

auto-cost reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps } | no auto-cost reference-bandwidth [ <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps ]

Syntax Description

no

Negate a command or set its defaults

auto-cost

Calculate OSPF cost according to bandwidth

reference-bandwidth

Reference bandwidth used to assign OSPF cost

Mbps

(Optional) Specify rate in Mbps

Gbps

Specify rate in Gbps

ref-bw-mbps

Rate in Mbps (bandwidth) (Default)

ref-bw-gbps

Rate in Gbps (bandwidth)

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

auto-cost reference-bandwidth

auto-cost reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps } | no auto-cost reference-bandwidth [ <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps ]

Syntax Description

no

Negate a command or set its defaults

auto-cost

Calculate OSPFv3 cost according to bandwidth

reference-bandwidth

Reference bandwidth used to assign OSPFv3 cost

Mbps

(Optional) Specify rate in Mbps

Gbps

Specify rate in Gbps

ref-bw-mbps

Rate in Mbps (bandwidth) (Default)

ref-bw-gbps

Rate in Gbps (bandwidth)

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

auto-recovery

auto-recovery [ reload-delay <time-out> ] | no auto-recovery [ reload-delay <time-out> ]

Syntax Description

no

Negate a command or set its defaults

auto-recovery

vPC settings to enable auto recovery if peer is presumed non-operational

reload-delay

(Optional) Duration to wait before assuming peer dead and restoring vpcs

time-out

(Optional) Time-out for restoring vPC links (in seconds)

Command Mode

- /exec/configure/vpc-domain

auto-remap-replication-servers

[no] auto-remap-replication-servers

Syntax Description

no

(Optional) Negate a command or set its defaults

auto-remap-replication-servers

Automatically re-map replication servers on every replication server add

Command Mode

- /exec/configure/if-nve

autonomous-system

{ { autonomous-system <local-as> } | { no autonomous-system [ <local-as> ] } }

Syntax Description

no

Negate a command or set its defaults

autonomous-system

Specify AS number for Address Family

local-as

Local AS number

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

autoroute announce

[no] autoroute announce

Syntax Description

no

(Optional) Negate a command or set its defaults

autoroute

parameters for IGP routing over tunnel

announce

announce tunnel to IGP

Command Mode

- /exec/configure/if-te

autoroute metric

[no] autoroute metric | autoroute metric { <value> | relative <rel-value> }

Syntax Description

no

Negate a command or set its defaults

autoroute

parameters for IGP routing over tunnel

metric

Specify mpls tunnel metric

value

Set tunnel metric for autoroutes

relative

Adjust tunnel metric for autoroutes relative to IGP

rel-value

Relative metric value

Command Mode

- /exec/configure/if-te

autostate

[no] autostate

Syntax Description

no

(Optional) Negate a command or set its defaults

autostate

Enable or disable autostate for interface-vlan

Command Mode

- /exec/configure/if-vlan

autovlan enable

[no] autovlan enable

Syntax Description

no

(Optional) Negate a command or set its defaults

autovlan

Automatic creation/deletion of VLANs

enable

Enable auto creation/deletion of VLANs

Command Mode

- /exec/configure/vmt-conn

awk

| awk <expr>

Syntax Description

|

Pipe command output to filter

awk

Mini AWK

expr

Edition command (script)

Command Mode

- /output

Chapter 3. B Commands

- backoff

- backup-bw

- bandwidth

- bandwidth

- bandwidth

- bandwidth

- bandwidth

- bandwidth

- bandwidth

- bandwidth

- bandwidth

- bandwidth

- banner exec

- banner motd

- bcm-shell module

- bcm-shell module

- beacon

- begin exclude include end

- bestpath

- bestpath all

- bfd-app session auto-expiry timeout

- bfd-app session remove

- bfd-app session src-ip dest intf

- bfd-neighbor

- bfd

- bfd

- bfd

- bfd

- bfd

- bfd

- bfd authentication key-id key

- bfd authentication key-id key

- bfd echo-interface

- bfd echo-rx-interval

- bfd echo

- bfd interval

- bfd interval

- bfd interval min_rx multiplier

- bfd interval min_rx multiplier

- bfd interval min_rx multiplier

- bfd move-session target

- bfd neighbor src-ip dest

- bfd optimize subinterface

- bfd per-link

- bfd session-store remove client

- bfd session-store source-ip dest-ip intf client

- bfd session state state

- bfd slow-timer

- bfd startup-timer bfd startup-timer

- binary-location

- blink

- bloggerd delete all

- bloggerd live-process-core process pid

- bloggerd live-process-core sap

- bloggerd log-dump all

- bloggerd log-dump once log-buffer sap event-history

- bloggerd log-dump once pss uuid

- bloggerd log-throttle

- bloggerd log-transfer

- bloggerd log-transfer

- bloggerd mleak-check directory1 directory2

- bloggerd mleak-dump all

- bloggerd parse log-buffer file

- bloggerd parse log-buffer file sap

- bloggerd parse pss file

- bmp-activate-server

- bmp-server

- boot-install nxos

- boot-order

- boot

- boot aci

- boot auto-copy

- boot kickstart

- boot mode lxc

- boot nxos

- boot nxos sup-1

- boot nxos sup-1 sup-2

- boot nxos sup-2

- boot order bootflash

- boot order pxe

- boot system

- bootmode boot

- bootmode extruntime

- bootmode hitless

- bootmode module

- bootmode nodiagruntime

- bootmode runtime

- buffer-boost

- buffer-delete

- buffer-move

- burst-detect rise-threshold bytes fall-threshold bytes2

backoff

backoff <initial-backoff> <maximum-backoff> | no backoff

Syntax Description

no

Negate a command or set its defaults

backoff

Set LDP session backoff parameters

initial-backoff

Initial session backoff time (seconds)

maximum-backoff

Maximum session backoff time (seconds)

Command Mode

- /exec/configure/ldp

backup-bw

backup-bw { <kbps> } | no backup-bw

Syntax Description

no

Negate a command or set its defaults

backup-bw

Represents bw for Fast Reroute backup

kbps

Amount of allocatable backup bw, any lsp may use

Command Mode

- /exec/configure/if-te

bandwidth

bandwidth { <bandwidth_val> | inherit [ <inherit_val> ] } | no bandwidth { [ <bandwidth_val> ] | inherit [ <inherit_val> ] }

Syntax Description

no

Negate a command or set its defaults

bandwidth

Set bandwidth informational parameter

inherit

Specify that bandwidth is inherited

Command Mode

- /exec/configure/if-eth-port-channel /exec/configure/if-port-channel-range /exec/configure/if-port-channel-sub /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel-p2p

bandwidth

[no] bandwidth { { <bw-value> [ bps | kbps | mbps | gbps ] | percent <percentage> } | { remaining percent <rem-perc> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

bandwidth

Specify bandwidth for the class

bps

(Optional) Bits per second

kbps

(Optional) Kilo bits per second

mbps

(Optional) Mega bits per second

gbps

(Optional) Giga bits per second

percent

Percentage of available bandwidth

percentage

Value in percentage

remaining

% of remaining bandwidth

rem-perc

Value in percentage

Command Mode

- /exec/configure/policy-map/type/plc/class

bandwidth

{ bandwidth <value> } | { no bandwidth }

Syntax Description

no

Negate a command or set its defaults

bandwidth

Bandwidth per flow

value

Per Flow Bandwidth in Mbps

Command Mode

- /exec/configure/nbm-flow/policy

bandwidth

bandwidth { <bandwidth_val> | inherit [ <inherit_val> ] } | no bandwidth { [ <bandwidth_val> ] | inherit [ <inherit_val> ] }

Syntax Description

no

Negate a command or set its defaults

bandwidth

Set bandwidth informational parameter

bandwidth_val

Bandwidth in kilobits

inherit

Specify that bandwidth is inherited

inherit_val

(Optional) Bandwidth in kilobits

Command Mode

- /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub

bandwidth

bandwidth { <bandwidth_val> | inherit [ <inherit_val> ] } | no bandwidth { [ <bandwidth_val> ] | inherit [ <inherit_val> ] }

Syntax Description

no

Negate a command or set its defaults

bandwidth

Set bandwidth informational parameter

bandwidth_val

Bandwidth in kilobits

inherit

Specify that bandwidth is inherited

inherit_val

(Optional) Bandwidth in kilobits

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-gig-ether-sub /exec/configure/if-remote-ethernet-sub

bandwidth

[no] bandwidth { { xxx <bw-value> [ bps | kbps | mbps | gbps ] | percent <percentage> } | { remaining percent <rem-perc> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

bandwidth

Specify bandwidth for the class

xxx

xxx

bps

(Optional) Bits per second

kbps

(Optional) Kilo bits per second

mbps

(Optional) Mega bits per second

gbps

(Optional) Giga bits per second

percent

Percentage of available bandwidth

percentage

Value in percentage

remaining

% of remaining bandwidth

rem-perc

Value in percentage

Command Mode

- /exec/configure/policy-map/type/queuing/class

bandwidth

[no] bandwidth | bandwidth { <bw> }

Syntax Description

no

Negate a command or set its defaults

bandwidth

Specify LSP bandwidth

bw

bandwidth requirement in kbps

Command Mode

- /exec/configure/te/lsp-attr

bandwidth

[no] bandwidth | bandwidth { <kbps> }

Syntax Description

no

Negate a command or set its defaults

bandwidth

tunnel bandwidth requirement

kbps

bandwidth requirement in kbps

Command Mode

- /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

bandwidth

bandwidth <bandwidth_val> | no bandwidth

Syntax Description

no

Negate a command or set its defaults

bandwidth

Set bandwidth informational parameter

bandwidth_val

Bandwidth in kilobits

Command Mode

- /exec/configure/if-any-tunnel

bandwidth

bandwidth <bandwidth_val> | no bandwidth

Syntax Description

no

Negate a command or set its defaults

bandwidth

Set bandwidth informational parameter

bandwidth_val

Bandwidth in kilobits

Command Mode

- /exec/configure/if-vlan-common

banner exec

{ banner exec <lineNo> } | { no banner exec }

Syntax Description

no

Negate a command or set its defaults

banner

Configure banner message

exec

Configure banner exec message

lineNo

Delimiter char (first char is delimiter char) followed by message ending with delimiter

Command Mode

- /exec/configure

banner motd

{ banner motd <line> } | { no banner motd }

Syntax Description

no

Negate a command or set its defaults

banner

Configure banner message

motd

Configure banner motd message

line

Delimiter char (Very first char is delimiter char) followed by message ending with delimiter

Command Mode

- /exec/configure

bcm-shell module

bcm-shell module <module> <quoted-cmd>

Syntax Description

bcm-shell

bcm shell/cmd

module

Module number of the linecard

module

Enter module number

quoted-cmd

the command to run on bcm-shell

Command Mode

- /exec

bcm-shell module

bcm-shell module <module>

Syntax Description

bcm-shell

bcm shell/cmd

module

Module number of the linecard

module

Enter module number

Command Mode

- /exec

beacon

[no] beacon

Syntax Description

no

(Optional) Negate a command or set its defaults

beacon

Disable/enable the beacon for an interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

begin exclude include end

| { begin | exclude | include | end } [ -i | -x ] + <expr> [ next <num> | prev <num> ] +

Syntax Description

|

Pipe command output to filter

begin

Begin with the line that matches

exclude

Exclude lines that match

include

Include lines that match

end

End with the line that matches

-i

(Optional) Ignore case difference when comparing strings

-x

(Optional) Print only lines where the match is a whole line

expr

Search for the expression

next

(Optional) Print <num> lines of context after every matching line

prev

(Optional) Print <num> lines of context before every matching line

num

(Optional) Print <num> lines of context

Command Mode

- /output

bestpath

[no] bestpath { always-compare-med | med { missing-as-worst | non-deterministic | confed } | compare-routerid | compare-neighborid | cost-community ignore | as-path multipath-relax }

Syntax Description

no

(Optional) Negate a command or set its defaults

bestpath

Change default bestpath selection algorithm

always-compare-med

Compare MED on paths from different AS

med

MED

missing-as-worst

Treat missing MED as highest MED

non-deterministic

Not always pick the best-MED path among paths from same AS

compare-routerid

Compare router-id for identical EBGP paths

compare-neighborid

When more paths available than max path config, use neighborid tibreaker

cost-community

cost community

ignore

Ignore cost communities in bestpath selection

confed

Compare MED only from paths originated from within a confederation

as-path

AS-Path

multipath-relax

Relax AS-Path restriction when choosing multipaths

Command Mode

- /exec/configure/router-bgp/vrf-cmds

bestpath all

[no] bestpath { all-paths-ecmp }

Syntax Description

no

(Optional) Negate a command or set its defaults

bestpath

Change default bestpath selection algorithm

all-paths-ecmp

Treat all paths as ECMP during bestpath calculation

Command Mode

- /exec/configure/router-bgp/router-bgp-af

bfd-app session auto-expiry timeout

bfd-app session auto-expiry { timeout <millis> | now }

Syntax Description

bfd-app

BFD application commands

auto-expiry

auto expiry start/end

session

session operation

timeout

timeout after

now

expiry reached, dont wait to timeout, do them now

millis

milli-secs later

Command Mode

- /exec/configure

bfd-app session remove

bfd-app session remove { all | intf <intf_id> | iod <iod_id> }

Syntax Description

bfd-app

BFD application commands

session

session operation

remove

Remove sessions

all

Remove all sessions

intf

Remove all sessions on interface

intf_id

Interface Id

iod

interface iod

iod_id

Interface iod in hex

Command Mode

- /exec/configure

bfd-app session src-ip dest intf

[no] bfd-app session src-ip { <src_ip> dest-ip <dest_ip> | <src_ipv6> dest-ip <dest_ipv6> } { intf <intf_id> | iod <iod_id> }

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd-app

BFD application commands

session

session operation

src-ip

Source ip

src_ip

Source ip value

dest-ip

Destination ip

dest_ip

Destination ip value

iod

interface iod

iod_id

Interface iod in hex

intf

interface

intf_id

Interface Id

Command Mode

- /exec/configure

bfd-neighbor

[no] bfd-neighbor <remote-peer-ip> <inner-dest-ip> <inner-dest-mac>

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd-neighbor

BFD

remote-peer-ip

Remote peer IP address

inner-dest-ip

Inner Destination IP address

inner-dest-mac

Inner Destination MAC address

Command Mode

- /exec/configure/if-nve

bfd

[no] bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

Enable IPv4 BFD on all ISIS interfaces

Command Mode

- /exec/configure/router-isis/router-isis-af-ipv6

bfd

[no] bfd [ ipv4 | ipv6 ]

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

BFD commands

ipv4

(Optional) ipv4 sessions

ipv6

(Optional) ipv6 sessions

Command Mode

- /exec/configure/if-ma /exec/configure/if-vlan /exec/configure/if-ma-p2p

bfd

[ no | default ] bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

bfd

Bidirectional Fast Detection for the neighbor

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

bfd

[no] bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

Enable BFD on all OSPF interfaces

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

bfd

[no] bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

Enable BFD on all EIGRP interfaces

Command Mode

- /exec/configure/router-eigrp /exec/configure/router-eigrp/router-eigrp-vrf /exec/configure/router-eigrp/router-eigrp-af-common

bfd

[no] bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

Enable BFD on all OSPF interfaces

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

bfd authentication key-id key

bfd [ { ipv4 | ipv6 } ] authentication <auth_name> key-id <key_id_val> { key <key_val> | hex-key <h_key_val> } | no bfd [ { ipv4 | ipv6 } ] authentication

Syntax Description

no

Negate a command or set its defaults

bfd

BFD commands

authentication

Configure BFD authentication parameters

ipv4

(Optional) ipv4 sessions

ipv6

(Optional) ipv6 sessions

auth_name

auth algorithm

key-id

Key ID to use in BFD frames

key_id_val

Key ID value

key

ASCII SHA1 secret

hex-key

HEX binary SHA1 secret

key_val

SHA1 secret value

h_key_val

SHA1 secret value. e.g ABCD123

Command Mode

- /exec/configure/if-ma /exec/configure/if-vlan /exec/configure/if-ma-p2p

bfd authentication key-id key

[ no | default ] bfd [ { ipv4 | ipv6 } ] authentication <auth_name> key-id <key_id_val> { key <key_val> | hex-key <h_key_val> }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

bfd

Bidirectional Fast Detection for the neighbor

authentication

Configure BFD authentication parameters

ipv4

(Optional) ipv4 sessions

ipv6

(Optional) ipv6 sessions

auth_name

auth algorithm

key-id

Key ID to use in BFD frames

key_id_val

Key ID value

key

ASCII SHA1 secret

hex-key

HEX binary SHA1 secret

key_val

SHA1 secret value

h_key_val

SHA1 secret value. e.g ABCD123

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

bfd echo-interface

[no] bfd echo-interface <ifindex>

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

BFD commands

echo-interface

Configure interface used for bfd echo frames

ifindex

loopback interface

Command Mode

- /exec/configure

bfd echo-rx-interval

bfd [ ipv4 | ipv6 ] echo-rx-interval <intv> | no bfd [ ipv4 | ipv6 ] echo-rx-interval

Syntax Description

no

Negate a command or set its defaults

bfd

BFD commands

ipv6

(Optional) ipv6 sessions

ipv4

(Optional) ipv4 sessions

echo-rx-interval

Configure BFD session echo rx interval

intv

Echo Rx Interval in milliseconds

Command Mode

- /exec/configure /exec/configure/if-ma /exec/configure/if-ma-p2p

bfd echo

[no] bfd [ { ipv4 | ipv6 } ] echo

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

BFD commands

echo

Configure Echo function for all address families

ipv4

(Optional) ipv4 sessions

ipv6

(Optional) ipv6 sessions

Command Mode

- /exec/configure/if-ma /exec/configure/if-vlan /exec/configure/if-ma-p2p

bfd interval

[no] bfd [ ipv4 | ipv6 ] interval [ <min_tx_mills> min_rx <min_rx_mills> multiplier <int_mult> ]

Syntax Description

no

Negate a command or set its defaults

bfd

BFD commands

interval

Configure BFD session interval parameters

ipv6

(Optional) ipv6 sessions

ipv4

(Optional) ipv4 sessions

min_tx_mills

(Optional) TX interval in milliseconds

min_rx

(Optional) Minimum RX interval

min_rx_mills

(Optional) RX interval in milliseconds

multiplier

(Optional) Configure detect multiplier for bfd sessions

int_mult

(Optional) Detect Multiplier

Command Mode

- /exec/configure

bfd interval

[no] bfd [ ipv4 | ipv6 ] interval [ <min_tx_mills> min_rx <min_rx_mills> multiplier <int_mult> ]

Syntax Description

no

Negate a command or set its defaults

bfd

BFD commands

interval

Configure BFD session interval parameters

ipv6

(Optional) ipv6 sessions

ipv4

(Optional) ipv4 sessions

min_tx_mills

(Optional) TX interval in milliseconds

min_rx

(Optional) Minimum RX interval

min_rx_mills

(Optional) RX interval in milliseconds

multiplier

(Optional) Configure detect multiplier for bfd sessions

int_mult

(Optional) Detect Multiplier

Command Mode

- /exec/configure/if-ma /exec/configure/if-ma-p2p

bfd interval min_rx multiplier

bfd [ ipv4 | ipv6 ] interval <min_tx_mills> min_rx <min_rx_mills> multiplier <int_mult> | { no | default } bfd [ ipv4 | ipv6 ] interval [ <min_tx_mills> min_rx <min_rx_mills> multiplier <int_mult> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

bfd

Bidirectional Fast Detection for the neighbor

interval

Configure BFD session interval parameters

ipv6

(Optional) ipv6 sessions

ipv4

(Optional) ipv4 sessions

min_tx_mills

TX interval in milliseconds

min_rx

Minimum RX interval

min_rx_mills

RX interval in milliseconds

multiplier

Configure detect multiplier for bfd sessions

int_mult

Detect Multiplier

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

bfd interval min_rx multiplier

bfd [ ipv6 | ipv4 ] interval <min_tx_mills> min_rx <min_rx_mills> multiplier <int_mult>

Syntax Description

bfd

BFD commands

interval

Configure BFD session interval parameters

ipv6

(Optional) ipv6 sessions

ipv4

(Optional) ipv4 sessions

min_tx_mills

TX interval in milliseconds

min_rx

Minimum RX interval

min_rx_mills

RX interval in milliseconds

multiplier

Configure detect multiplier for bfd sessions

int_mult

Detect Multiplier

Command Mode

- /exec/configure/if-ma /exec/configure/if-ma-p2p

bfd interval min_rx multiplier

bfd [ ipv6 | ipv4 ] interval <min_tx_mills> min_rx <min_rx_mills> multiplier <int_mult>

Syntax Description

bfd

BFD commands

interval

Configure BFD session interval parameters

ipv6

(Optional) ipv6 sessions

ipv4

(Optional) ipv4 sessions

min_tx_mills

TX interval in milliseconds

min_rx

Minimum RX interval

min_rx_mills

RX interval in milliseconds

multiplier

Configure detect multiplier for bfd sessions

int_mult

Detect Multiplier

Command Mode

- /exec/configure

bfd move-session target

bfd move-session target <target_mod> [ <discr> ]

Syntax Description

bfd

BFD commands

move-session

move a session

target

Target module

target_mod

Module number

discr

(Optional) Session discriminator

Command Mode

- /exec/configure/if-ma /exec/configure/if-ma-p2p

bfd neighbor src-ip dest

[no] bfd neighbor src-ip { <src_ip> dest-ip <dest_ip> | <src_ipv6> dest-ip <dest_ipv6> }

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

BFD commands

neighbor

BFD neighbor configuration commands (simulate client)

src-ip

Source ip

src_ip

Source ip value

dest-ip

Destination ip

dest_ip

Destination ip value

Command Mode

- /exec/configure/if-ma /exec/configure/if-ma-p2p

bfd optimize subinterface

[no] bfd [ ipv4 ] optimize subinterface

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

BFD commands

optimize

optimize

subinterface

optimize subinterfaces

ipv4

(Optional) ipv4 sessions

Command Mode

- /exec/configure/if-ma /exec/configure/if-ma-p2p

bfd per-link

[no] bfd [ { ipv4 | ipv6 } ] per-link

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

BFD commands

per-link

Run BFD sessions on each port-channel link

ipv4

(Optional) ipv4 sessions

ipv6

(Optional) ipv6 sessions

Command Mode

- /exec/configure/if-eth-port-channel /exec/configure/if-port-channel-sub /exec/configure/if-eth-port-channel-p2p

bfd session-store remove client

bfd session-store remove <hex_disc> client <int_cl>

Syntax Description

bfd

BFD commands

session-store

session store operation

remove

Remove session from session store

hex_disc

Session discriminator

client

Client Id

int_cl

client

Command Mode

- /exec/configure

bfd session-store source-ip dest-ip intf client

bfd session-store source-ip <src_ip> dest-ip <dest_ip> intf <intf_id> client <int_cl>

Syntax Description

bfd

BFD commands

session-store

Session store operation

source-ip

source ip

src_ip

source ip value

dest-ip

dest ip

dest_ip

source ip value

intf

interface

intf_id

Interface Id

client

Client Id

int_cl

client

Command Mode

- /exec/configure

bfd session state state

bfd session state <hex_disc> state <state_up_down>

Syntax Description

bfd

BFD commands

session

session related test

state

Change session state

hex_disc

Session discriminator

state

Change to state

state_up_down

UP/DOWN

Command Mode

- /exec/configure

bfd slow-timer

bfd [ { ipv4 | ipv6 } ] slow-timer <int_slow_timer> | no bfd [ { ipv4 | ipv6 } ] slow-timer

Syntax Description

no

Negate a command or set its defaults

bfd

BFD commands

slow-timer

Configure slow mode timer for sessions

int_slow_timer

Slow rate timer in milliseconds

ipv4

(Optional) ipv4 sessions

ipv6

(Optional) ipv6 sessions

Command Mode

- /exec/configure

bfd startup-timer bfd startup-timer

bfd startup-timer <int_startup_timer> | [ no ] bfd startup-timer

Syntax Description

no

(Optional) Negate a command or set its defaults

bfd

BFD commands

startup-timer

Configure Delayed Start Up timer for sessions

int_startup_timer

Start Up timer in seconds

Command Mode

- /exec/configure

binary-location

[no] binary-location <source-uri>

Syntax Description

no

(Optional) Negate a command or set its defaults

binary-location

the location binaries are downloaded from

source-uri

Location for restoration to pick up binaries

Command Mode

- /exec/configure/personality

blink

[no] blink { module <module> | <s0> <santa-cruz-range> | chassis | powersupply <psnum> | fan <fan_num> }

Syntax Description

no

(Optional) Negate a command or set its defaults

blink

blink locator led

module

blink module led

module

please enter the module number

s0

blink a specific xbar

santa-cruz-range

please enter the xbar number

chassis

blink chassis led

powersupply

blink powersupply led

psnum

powersupply number

fan

blink Fan led

fan_num

fan number

Command Mode

- /exec

bloggerd delete all

bloggerd delete { all-temporary-binary-log-dumps | all-temporary-binary-show-tech-files }

Syntax Description

bloggerd

Blogger commands

delete

Delete all logs of one type

all-temporary-binary-log-dumps

Delete all binary log dumps from the local partition (/var/sysmgr/tmp/)

all-temporary-binary-show-tech-files

Delete all binary show tech files

Command Mode

- /exec

bloggerd live-process-core process pid

bloggerd live-process-core process <process-name> pid <process-pid>

Syntax Description

bloggerd

Blogger commands

live-process-core

Request a process core dump without killing it

process

Linux Process name

process-name

Enter the Linux name of the process for which core is being requested (Eg: sysmgr)

pid

Process PID

process-pid

Enter the linux PID of the process for which core is being requested (Eg: 4571)

Command Mode

- /exec

bloggerd live-process-core sap

bloggerd live-process-core sap <sap>

Syntax Description

bloggerd

Blogger commands

live-process-core

Dump the core of the live-process

sap

Dump core for a particular SAP

sap

Enter a valid SAP. Enter 0 for ALL SAPs in this VDC

Command Mode

- /exec

bloggerd log-dump all

[no] bloggerd log-dump { all | [ module <module> ] sap <sap_num> [ vdc <new_id> | vdc-all ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

bloggerd

Blogger commands

log-dump

Dump Log Buffer

all

Log Dump for ALL services across ALL modules in the switch on reaching threshold

module

(Optional) Enable Buffer Dump for particular Module

module

(Optional) Enter a valid Module Number

sap

Enable Buffer Dump for a particular sap

sap_num

Enter a valid SAP. Enter 0 for ALL SAPs in this VDC

vdc

(Optional) Enable Log Dump for a particular VDC. DEFAULT_VDC by default

new_id

(Optional) Enter a valid VDC ID

vdc-all

(Optional) Enable Log Dump for the sap on ALL VDCs

Command Mode

- /exec/configure

bloggerd log-dump once log-buffer sap event-history

bloggerd log-dump once log-buffer sap <sap> event-history { errors | msgs | { app-specific <uuid> instance <buffer-instance> } }

Syntax Description

bloggerd

Blogger commands

log-dump

Dump Log Buffer

once

Dump Log Buffer once immediately

log-buffer

Dump Log buffer

sap

Enable Buffer Dump for a particular sap

sap

Enter a valid SAP. Enter 0 for ALL SAPs in this VDC

event-history

Event-History Buffers

errors

event-history errors

msgs

event-history messages

app-specific

application specific event history

uuid

Enter valid app's UUID

instance

Buffer Instance of the App-Specific SDWrap buffer

buffer-instance

Enter a valid SDWrap buffer instance for the app

Command Mode

- /exec

bloggerd log-dump once pss uuid

bloggerd log-dump once pss uuid <uuid>

Syntax Description

bloggerd

Blogger commands

log-dump

Dump Log Buffer

once

Dump Log Buffer once immediately

pss

Dump PSS

uuid

Dump PSS for a particular UUID

uuid

Enter a app's UUID

Command Mode

- /exec

bloggerd log-throttle

[no] bloggerd log-throttle [ min-rollover <min-rollover> max-rollover-per-minute <max-rollover-per-minute> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

bloggerd

Blogger commands

log-throttle

Enable Log Dump Throttling for all NxOS services

min-rollover

(Optional) Number of minimum buffer rollovers before starting to throttle. Default: 5

min-rollover

(Optional) Enter the mininum number of roll-overs before throttleing log-dump. Default: 5

max-rollover-per-minute

(Optional) Maximum allowed buffer rollovers per minute. Default: 1

max-rollover-per-minute

(Optional) Enter the maximum allowed roll-overs per minute before throttling. Default: 1

Command Mode

- /exec/configure

bloggerd log-transfer

bloggerd log-transfer { <ip-addr> <path> | logflash }

Syntax Description

bloggerd

Blogger commands

log-transfer

Configure log transfer

ip-addr

IP addr of logging server

path

Path in tftp server to store logs. Eg: logOutput

logflash

Move all log-files to logflash

Command Mode

- /exec/configure

bloggerd log-transfer

[no] bloggerd log-transfer

Syntax Description

no

Negate a command or set its defaults

bloggerd

Blogger commands

log-transfer

Configure log transfer

Command Mode

- /exec/configure

bloggerd mleak-check directory1 directory2

bloggerd mleak-check directory1 <uri0> directory2 <uri1>

Syntax Description

bloggerd

Blogger commands

mleak-check

Leak check

directory1

Enter path of directory

uri0

Linux path to file/directory (Eg: /bootflash/abc)

directory2

Enter path of directory

uri1

Linux path to file/directory (Eg: /bootflash/abc)

Command Mode

- /exec

bloggerd mleak-dump all

bloggerd mleak-dump all

Syntax Description

bloggerd

Blogger commands

mleak-dump

Leak dump

all

All apps on all modules

Command Mode

- /exec

bloggerd parse log-buffer file

bloggerd parse log-buffer { file | directory } <uri0>

Syntax Description

bloggerd

Blogger commands

parse

Parse a file

log-buffer

Parse buffer log file

directory

Enter path of directory

file

Enter file name. Please unzip file before parsing!

uri0

Linux path to file/directory (Eg: /bootflash/abc)

Command Mode

- /exec

bloggerd parse log-buffer file sap

bloggerd parse log-buffer file <uri0> sap <sap-num>

Syntax Description

bloggerd

Blogger commands

parse

Parse a file

log-buffer

Parse buffer log file

file

Enter file name. Please unzip file before parsing!

uri0

Linux path to file (Eg: /bootflash/abc)

sap

SAP of the application which should parse the file

sap-num

Enter a valid SAP. Enter 0 for ALL SAPs in this VDC

Command Mode

- /exec

bloggerd parse pss file

bloggerd parse pss file <uri0>

Syntax Description

bloggerd

Blogger commands

parse

Parse a file

pss

Parse a dumped PSS File

file

Enter file name (without pss extensions). Please unzip file before parsing!

uri0

Linux path to file/directory (Eg: /bootflash/abc)

Command Mode

- /exec

bmp-activate-server

bmp-activate-server <server-number> | { no | default } bmp-activate-server <server-number>

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

bmp-activate-server

Activate BMP monitoring for the peer

server-number

Server Id

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

bmp-server

[no] bmp-server <server-number>

Syntax Description

no

(Optional) Negate a command or set its defaults

bmp-server

Configure bmp-server

server-number

server number value

Command Mode

- /exec/configure/router-bgp

boot-install nxos

{ boot-install nxos <uri0> | no boot-install nxos [ <uri0> ] }

Syntax Description

no

Negate a command or set its defaults

boot-install

Configure boot variables

nxos

Configure NXOS image

uri0

Enter NXOS image uri

Command Mode

- /exec/configure

boot-order

boot-order <new_id>

Syntax Description

boot-order

The order at which a vdc will boot up. VDCs at the same level will be started parallely

new_id

The order at which a vdc will boot up. VDCs at the same level will be started parallely

Command Mode

- /exec/configure/vdc

boot

{ boot <s0> <uri0> [ module [ <module> ] ] | no boot <s0> [ <uri0> [ module [ <module> ] ] ] }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

s0

use [show boot variables] for list of keywords

uri0

Enter module image uri

module

(Optional) Enter module number for the image

module

(Optional) Enter module number

Command Mode

- /exec/configure

boot aci

{ boot aci <uri0> | no boot aci [ <uri0> ] }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

aci

Configure ACI image

uri0

Enter ACI image uri

Command Mode

- /exec/configure

boot auto-copy

[no] boot auto-copy

Syntax Description

no

(Optional) Negate a command or set its defaults

boot

Configure boot variables

auto-copy

Turns on/off autocopy of bootvar images

Command Mode

- /exec/configure

boot kickstart

{ boot kickstart <uri0> | no boot kickstart [ <uri0> ] }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

kickstart

Configure kickstart image

uri0

Enter Kickstart image uri

Command Mode

- /exec/configure

boot mode lxc

[no] boot mode lxc

Syntax Description

no

(Optional) Negate a command or set its defaults

boot

Configure boot mode

mode

boot mode

lxc

Turns on/off lxc mode

Command Mode

- /exec/configure

boot nxos

{ boot nxos <uri0> | no boot nxos [ <uri0> ] }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

nxos

Configure NXOS image

uri0

Enter nxos image uri

Command Mode

- /exec/configure

boot nxos sup-1

{ boot nxos <uri0> sup-1 | no boot nxos <uri0> sup-1 }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

nxos

Configure NXOS image

uri0

Enter kickstart image uri

sup-1

Enter sup-1 to configure the 1st sup

Command Mode

- /exec/configure

boot nxos sup-1 sup-2

{ boot nxos <uri0> sup-1 sup-2 | no boot nxos <uri0> sup-1 sup-2 }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

nxos

Configure NXOS image

uri0

Enter kickstart image uri

sup-1

Enter sup-1 to configure the 1st sup

sup-2

Enter sup-2 to configure the 2nd sup

Command Mode

- /exec/configure

boot nxos sup-2

{ boot nxos <uri0> sup-2 | no boot nxos <uri0> sup-2 }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

nxos

Configure NXOS image

uri0

Enter kickstart image uri

sup-2

Enter sup-2 to configure the 2nd sup

Command Mode

- /exec/configure

boot order bootflash

{ boot order bootflash [ pxe ] | no boot order bootflash [ pxe ] }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

order

Configure loader fallback order

bootflash

Boot from Bootflash

pxe

(Optional) Pxe Boot

Command Mode

- /exec/configure

boot order pxe

{ boot order pxe [ bootflash ] | no boot order pxe [ bootflash ] }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

order

Configure loader fallback order

pxe

Pxe Boot

bootflash

(Optional) Boot from Bootflash

Command Mode

- /exec/configure

boot system

{ boot system <uri0> | no boot system [ <uri0> ] }

Syntax Description

no

Negate a command or set its defaults

boot

Configure boot variables

system

Configure system image

uri0

Enter system image uri

Command Mode

- /exec/configure

bootmode boot

[no] bootmode boot

Syntax Description

no

(Optional) Negate a command or set its defaults

bootmode

set bootmode for all modules in the switch

boot

boot in boot mode

Command Mode

- /exec/configure

bootmode extruntime

[no] bootmode extruntime

Syntax Description

no

(Optional) Negate a command or set its defaults

bootmode

set bootmode for all modules in the switch

extruntime

boot in runtime mode with extended diags

Command Mode

- /exec/configure

bootmode hitless

[no] bootmode hitless

Syntax Description

no

(Optional) Negate a command or set its defaults

bootmode

set bootmode for all modules in the switch

hitless

boot in hitless mode

Command Mode

- /exec/configure

bootmode module

[no] bootmode module <module> { boot | extruntime | hitless | netboot | nodiagruntime | runtime }

Syntax Description

no

(Optional) Negate a command or set its defaults

bootmode

set bootmode for all modules in the switch

module

set bootmode for a given module in the switch

module

please enter module number

boot

boot in boot mode

extruntime

boot in runtime mode with extended diags

hitless

boot in hitless mode

netboot

boot using boot netboot in runtime mode

nodiagruntime

boot in runtime mode without running any diags

runtime

boot in runtime mode with normal diags

Command Mode

- /exec/configure

bootmode nodiagruntime

[no] bootmode nodiagruntime

Syntax Description

no

(Optional) Negate a command or set its defaults

bootmode

set bootmode for all modules in the switch

nodiagruntime

boot in runtime mode without running any diags

Command Mode

- /exec/configure

bootmode runtime

[no] bootmode runtime

Syntax Description

no

(Optional) Negate a command or set its defaults

bootmode

set bootmode for all modules in the switch

runtime

boot in runtime mode with normal diags

Command Mode

- /exec/configure

buffer-boost

[no] buffer-boost

Syntax Description

no

(Optional) Negate a command or set its defaults

buffer-boost

Enable extra buffers for this interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

buffer-delete

buffer-delete { <id-range> | <id> | all }

Syntax Description

buffer-delete

delete buffered command(s)

id-range

Range(whole-number) of command id(s) to be deleted from switch-profile buffer

id

Exact command id (x.x.x format) to be deleted from switch-profile buffer

all

delete all buffered commands

Command Mode

- /exec/configure

buffer-move

buffer-move <fromid> <toid>

Syntax Description

buffer-move

move buffered command(s)

fromid

Command id of command(s) to be moved in switch-profile buffer

toid

New command id to be assigned in switch-profile buffer

Command Mode

- /exec/configure

burst-detect rise-threshold bytes fall-threshold bytes2

[no] burst-detect rise-threshold <value-in-bytes> bytes fall-threshold <value-in-bytes> bytes2

Syntax Description

no

(Optional) Negate a command or set its defaults

burst-detect

Specify OOBST burst-detect thresholds for the class

rise-threshold

Threshold bytes(queue depth) to start monitoring burst

value-in-bytes

bytes

bytes

fall-threshold

Threshold bytes(queue depth) to stop monitoring burst

value-in-bytes

bytes2

bytes2

Command Mode

- /exec/configure/policy-map/type/queuing/class

Chapter 4. C Commands

- callhome

- callhome send configuration

- callhome send diagnostic

- callhome send eem subject body

- callhome test

- callhome test inventory

- callhome test supfail

- capability additional-paths receive

- capability additional-paths send

- capability suppress 4-byte-as

- capability vrf-lite

- capture session

- carrier-delay

- cbts-member tunnel-te

- cd

- cdp advertise v1

- cdp enable

- cdp enable

- cdp format device-id

- cdp holdtime

- cdp timer

- certificate

- cfs clear message-context name session-id

- cfs debug all

- cfs distribute

- cfs eth cos

- cfs eth distribute

- cfs ipv4 distribute

- cfs ipv6 distribute

- cfs merge all-fabrics name

- cfs region

- change-password

- channel-group

- channel-group

- channel-group

- channel-group force

- chassis-serial

- checkpoint

- checkpoint

- cipher-suite

- class-map

- class-map type control-plane

- class-map type network-qos

- class-map type psp

- class-map type queuing

- class-map type queuing

- class

- class

- class __inline__

- class class-default

- class type network-qos

- class type network-qos class-default

- class type psp

- class type queuing

- clean ip bfd

- clean ipv6 bfd

- clear

- clear

- clear

- clear

- clear aaa local user blocked username

- clear access-list counters

- clear access-list hardware counters

- clear access-list ipsg stats

- clear accounting log

- clear aclqos cl-qos

- clear aclqos fab

- clear aclqos fc

- clear aclqos libdrv

- clear aclqos map

- clear aclqos merge

- clear aclqos pl

- clear aclqos ppf-parse

- clear aclqos ppf

- clear aclqos qng-hw

- clear aclqos qng

- clear aclqos rl

- clear aclqos rm

- clear aclqos sch

- clear aclqos stats

- clear aclqos tbl

- clear aclqos trace-detail

- clear aclqos trace

- clear aclqos uf

- clear bfd statistics

- clear bgp

- clear bgp bmp stats server

- clear bgp event-history

- clear bgp private

- clear bootvar log

- clear cdp counters

- clear checkpoint database

- clear cli history

- clear clis event-history objstr

- clear controller accounting log

- clear copp statistics

- clear cores

- clear cores archive

- clear counters

- clear counters buffers

- clear counters interface

- clear counters interface all

- clear counters interface snmp

- clear counters mpls strip

- clear debug-logfile

- clear debug logfile

- clear eigrp event-history

- clear evb hosts

- clear evb hosts

- clear evb statistics

- clear fabric database dci vrf node-id

- clear fabric database host all vni

- clear fabric database host statistics

- clear fabric database include-vrf

- clear fabric database statistics

- clear fabric database statistics type server-proto xmpp ip

- clear fabric database statistics type server-proto radius group

- clear fabricpath counters dropped

- clear fabricpath isis adjacency

- clear fabricpath isis statistics

- clear fabricpath isis traffic

- clear flow exporter

- clear flow monitor

- clear forwarding adjacency module

- clear forwarding adjacency mpls stats

- clear forwarding cumulative counter

- clear forwarding distribution lisp counters all

- clear forwarding events-history

- clear forwarding inconsistency

- clear forwarding ipv4 multicast counters

- clear forwarding ipv6-l3-route-history

- clear forwarding ipv6 adjacency module

- clear forwarding ipv6 adjacency mpls stats

- clear forwarding ipv6 inconsistency

- clear forwarding ipv6 multicast counters

- clear forwarding ipv6 route module

- clear forwarding l2-mc-route-history

- clear forwarding l2-oiflist-history

- clear forwarding l2-route-history

- clear forwarding l2mcast info l2-oiflist-history

- clear forwarding l2mcast info l2-route-history

- clear forwarding l2mcast info l2-xbar-history

- clear forwarding l2mcast info statistics

- clear forwarding l2vpn trace member-history

- clear forwarding l3-route-history

- clear forwarding mpls drop-stats

- clear forwarding mpls stats

- clear forwarding mpls trace adj-history

- clear forwarding mpls trace ecmp-history

- clear forwarding mpls trace label-history

- clear forwarding mpls trace te-history

- clear forwarding oiflist-history

- clear forwarding route module

- clear forwarding trace ecmp-history

- clear forwarding trace mfib oif-history

- clear forwarding trace mfib oiflist-history

- clear forwarding trace mfib v4-route-history

- clear forwarding trace mfib v6-route-history

- clear forwarding trace nve-ir-peer-history

- clear forwarding trace nve-l3-vni-history

- clear forwarding trace nve-peer-history

- clear forwarding trace otv-adj-history

- clear forwarding trace otv-vlan-history

- clear forwarding trace v4-adj-history

- clear forwarding trace v4-pfx-history

- clear forwarding trace v4-rnh-history

- clear forwarding trace v6-adj-history

- clear forwarding trace v6-pfx-history

- clear forwarding trace v6-rnh-history

- clear forwarding trace vobj-history

- clear frame traffic

- clear fs-daemon log

- clear hardware flow ip

- clear hardware flow ipmac

- clear hardware flow ipv6

- clear hardware flow l2

- clear hardware flow mpls

- clear hardware ip verify

- clear hardware rate-limiter

- clear hsrp counters clear hsrp state-history

- clear icmpv6 cache

- clear install all failed-standby

- clear install failure-reason

- clear install log-history all

- clear install status

- clear ip

- clear ip adjacency cache

- clear ip adjacency no-ufdm

- clear ip adjacency statistics

- clear ip amt tunnel

- clear ip arp

- clear ip arp cache

- clear ip arp controller-statistics

- clear ip arp event-history

- clear ip arp inspection log

- clear ip arp inspection statistics vlan

- clear ip arp multihoming-statistics

- clear ip arp static-arps-outside-subnet-count

- clear ip arp statistics

- clear ip arp suppression-cache statistics

- clear ip arp tunnel-statistics

- clear ip arp vpc-statistics

- clear ip cache

- clear ip dhcp global statistics

- clear ip dhcp relay statistics

- clear ip dhcp snooping binding

- clear ip dhcp snooping statistics

- clear ip dns all config

- clear ip dns use-vrf config

- clear ip eigrp accounting

- clear ip eigrp event-history

- clear ip eigrp event-history bfd

- clear ip eigrp events

- clear ip eigrp logging

- clear ip eigrp redistribution

- clear ip eigrp route-map statistics redistribute

- clear ip eigrp traffic

- clear ip ftm statistics

- clear ip igmp event-history

- clear ip igmp groups

- clear ip igmp interface statistics

- clear ip igmp snooping event-history

- clear ip igmp snooping explicit-tracking

- clear ip igmp snooping groups

- clear ip igmp snooping proxy querier ports vlan

- clear ip igmp snooping report statistics

- clear ip igmp snooping statistics

- clear ip igmp snooping vpc peer-link-exclude

- clear ip interface statistics

- clear ip lisp data-cache

- clear ip lisp map-cache

- clear ip lisp statistics

- clear ip mbgp dampening

- clear ip mbgp flap-statistics

- clear ip mbgp peer-template

- clear ip mfwd event-history

- clear ip mroute

- clear ip mroute statistics

- clear ip msdp event-history

- clear ip msdp peer

- clear ip msdp policy statistics sa-policy in

- clear ip msdp sa

- clear ip msdp statistics

- clear ip nat translation

- clear ip ospf database

- clear ip ospf event-history

- clear ip ospf event-history detail

- clear ip ospf interface

- clear ip ospf neighbor

- clear ip ospf policy statistics

- clear ip ospf redistribution

- clear ip ospf statistics

- clear ip ospf traffic

- clear ip pim event-history

- clear ip pim interface statistics

- clear ip pim policy statistics

- clear ip pim policy statistics jp

- clear ip pim route

- clear ip pim statistics

- clear ip rip policy statistics redistribute bgp

- clear ip rip statistics

- clear ip routing multicast event-history

- clear ip stats

- clear ip traffic

- clear ip vip

- clear ipv6 adjacency no-ufdm

- clear ipv6 adjacency statistics

- clear ipv6 amt tunnel

- clear ipv6 cache

- clear ipv6 dhcp relay statistics

- clear ipv6 eigrp route-map statistics redistribute

- clear ipv6 icmp

- clear ipv6 icmp vpc-statistics

- clear ipv6 interface statistics

- clear ipv6 lisp data-cache

- clear ipv6 lisp statistics

- clear ipv6 mld groups

- clear ipv6 mroute

- clear ipv6 mtu

- clear ipv6 neighbor

- clear ipv6 netstack mroute

- clear ipv6 pim event-history

- clear ipv6 pim interface statistics

- clear ipv6 pim policy statistics jp

- clear ipv6 pim route

- clear ipv6 pim statistics

- clear ipv6 raguard statistics

- clear ipv6 rip policy statistics redistribute bgp

- clear ipv6 routing multicast event-history

- clear ipv6 statistics

- clear ipv6 traffic

- clear isis adjacency

- clear isis dpi

- clear isis event-history

- clear isis ipv6 route-map statistics

- clear isis redistribution

- clear isis route-map statistics

- clear isis spf-log

- clear isis statistics

- clear isis traffic

- clear itd statistics

- clear itd statistics

- clear keystore

- clear l2dbg

- clear l2fwder statistics

- clear l3vm event-history

- clear lacp counters

- clear ldap-server statistics

- clear license

- clear lim counters

- clear line

- clear lisp ddt referral-cache

- clear lisp dynamic-eid

- clear lisp proxy-itr

- clear lisp site

- clear lldp counters

- clear lldp counters interface

- clear logging ip access-list cache

- clear logging logfile

- clear logging nvram

- clear logging onboard

- clear logging onboard

- clear logging onboard fex

- clear logging session

- clear mac address-table datapath

- clear mac address-table dynamic

- clear macsec mka statistics

- clear mmode database

- clear mpls forwarding statistics

- clear mpls static trace

- clear mpls strip labels

- clear mpls switching label statistics

- clear mpls traffic-eng auto-bw timers

- clear mpls traffic-eng link-management counters

- clear mpls traffic-eng tunnel counters

- clear mvr counters

- clear mvr counters receiver-ports

- clear mvr counters source-ports

- clear nbm flow statistics

- clear ngoam

- clear ngoam

- clear ngoam pathtrace

- clear ntp session

- clear ntp statistics

- clear nve peer-ip

- clear nve peers history-log

- clear nve peers interface counters

- clear nve peers vni interface counters

- clear nve vni counters

- clear nvram

- clear nxapi-server logs

- clear onep error

- clear onep history

- clear onep session rate-limit

- clear onep statistics

- clear onep trace

- clear ospfv3 database

- clear ospfv3 event-history

- clear ospfv3 event-history detail

- clear ospfv3 interface

- clear ospfv3 neighbor

- clear ospfv3 policy statistics

- clear ospfv3 redistribution

- clear ospfv3 statistics

- clear ospfv3 traffic

- clear pktmgr cache interface

- clear pktmgr client

- clear pktmgr interface

- clear port-profile command-cache

- clear port-profile database

- clear port-security dynamic address vlan

- clear port-security dynamic interface

- clear port-security nvram

- clear processes log all

- clear processes log all vdc-all

- clear processes log archive

- clear processes log pid

- clear processes vdc log all

- clear processes vdc log pid

- clear ptp corrections

- clear ptp counters interface

- clear qos mpls-snmp

- clear qos policies

- clear qos policies force

- clear qos statistics

- clear queuing burst-detect

- clear queuing pfc-queue

- clear queuing pfc-queue interface

- clear radius-server statistics

- clear radius session

- clear rmon

- clear route-map pbr-statistics

- clear routing event-history

- clear routing ip multicast mfdm pending counters

- clear routing ip multicast rpf-source retry-cache

- clear routing ipv6 event-history

- clear routing ipv6 multicast

- clear routing memstats

- clear routing multicast

- clear rpm pss

- clear scheduler logfile

- clear screen

- clear session state name

- clear sflow statistics

- clear snmp counters

- clear snmp hostconfig

- clear sockets statistics

- clear spanning-tree counters

- clear spanning-tree detected-protocols

- clear spanning-tree sps-hist

- clear ssh hosts

- clear system login failures

- clear system reset-reason

- clear system reset-reason history

- clear tacacs-server statistics

- clear tech-support lock

- clear tech-support lock

- clear user

- clear veobc counters

- clear vlan access-list counters

- clear vlan counters

- clear vmtracker counters

- clear vpc statistics all

- clear vpc statistics peer-keepalive

- clear vpc statistics vpc

- clear vpc transport statistics

- clear vrrp statistics

- clear vrrpv3 event-history

- clear vrrpv3 statistics

- clear vtp counters

- clear xl

- cli alias name

- cli reload parsetree

- cli show running-config local

- cli var name

- cli var name

- cli var name

- cli var name

- cli verifynrun

- client-to-client reflection

- clis all

- clock-tolerance ntp oneway absolute

- clock format 12

- clock format show-timezone debug

- clock format show-timezone syslog

- clock protocol

- clock set

- clock summer

- clock sync-interval

- cluster-id

- collect counter bytes

- collect flow sampler id

- collect ip version

- collect routing destination as

- collect routing forwarding-status

- collect routing next-hop address ipv4

- collect routing next-hop address ipv6

- collect routing source as

- collect timestamp sys-uptime first

- collect transport tcp flags

- commit

- commit

- commit verbose

- compress-bitfields ipv6 multicast

- compress-bitfields ipv6 multicast

- compress-bitfields multicast

- conf-offset

- confederation identifier

- confederation peers

- config-source controller

- configure

- configure maintenance profile normal

- configure private

- configure profile

- configure replace

- configure session

- configure sync

- congestion-control ecn

- congestion-control random-detect

- congestion-control random-detect forward-nonecn

- congestion-control random-detect global-buffer minimum-threshold maximum-threshold

- congestion-control tail-drop

- connect

- continue

- contract-id

- control-plane

- control vlan

- control vlan

- controller-credentials username password 0

- controller description

- controller ip vrf

- controller type l2 identifier

- copp clear policy pps

- copp copy profile prefix

- copp distributed-policing enable

- copp profile

- copp profile

- copp rate-limit disable

- copy

- copy

- copy licenses

- copy recursive

- copy running vdc-all

- copy vdc-all

- core-on-no-memory

- core-on-no-memory

- cost

- count

- counter name value op

- cpu threshold

- cpu threshold rising falling interval

- crypto ca authenticate

- crypto ca crl request

- crypto ca enroll

- crypto ca export pkcs12

- crypto ca import certificate

- crypto ca import pkcs12

- crypto ca lookup

- crypto ca remote ldap

- crypto ca test verify

- crypto ca trustpoint

- crypto cert ssh-authorize

- crypto certificatemap mapname

- crypto key generate rsa

- crypto key param rsa label modulus

- crypto key zeroize rsa

- cryptographic-algorithm

- customer-id

- cut

callhome

callhome

Syntax Description

callhome

Enter the callhome configuration mode

Command Mode

- /exec/configure

callhome send configuration

callhome send configuration

Syntax Description

callhome

callhome commands

send

send a command callhome message

configuration

configuration type

Command Mode

- /exec

callhome send diagnostic

callhome send diagnostic

Syntax Description

callhome

callhome commands

send

send a command callhome message

diagnostic

dignostic command

Command Mode

- /exec

callhome send eem subject body

callhome send eem subject <s1> body <s2>

Syntax Description

callhome

callhome commands

send

send a command callhome message

eem

eem action email

subject

action email subject

body

action email body

s1

subject-text string

s2

body-text string

Command Mode

- /exec

callhome test

callhome test

Syntax Description

callhome

callhome commands

test

send a test callhome message

Command Mode

- /exec

callhome test inventory

callhome test inventory

Syntax Description

callhome

callhome commands

test

send a test callhome message

inventory

send a dummy callhome inventory

Command Mode

- /exec

callhome test supfail

callhome test supfail

Syntax Description

callhome

callhome commands

test

send a test callhome message

supfail

send a dummy callhome message about sup failure

Command Mode

- /exec

capability additional-paths receive

[ no | default ] capability additional-paths receive [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

capability

Advertise capability to the peer

additional-paths

Additional paths capability

receive

Additional paths Receive capability

disable

(Optional) Do not advertise additional paths Receive capability

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

capability additional-paths send

[ no | default ] capability additional-paths send [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

capability

Advertise capability to the peer

additional-paths

Additional paths capability

send

Additional paths Send capability

disable

(Optional) Do not advertise additional paths Send capability

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

capability suppress 4-byte-as

[ no | default ] capability suppress 4-byte-as

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

capability

Capability

suppress

Suppress sending out capability

4-byte-as

Suppress 4-byte AS Capability

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

capability vrf-lite

[no] capability vrf-lite [ evpn ]

Syntax Description

no

(Optional) Negate a command or set its defaults

capability

Capability

vrf-lite

Enable VRF-lite support

evpn

(Optional) Ethernet VPN

Command Mode

- /exec/configure/router-ospf/vrf

capture session

[no] capture session <session-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

capture

Enable packet capture on this filter for session

session

Session ID <1-48> for this session

session-id

Session ID <1-48> for this session

Command Mode

- /exec/configure/ipacl /exec/configure/ipv6acl /exec/configure/macacl /exec/configure/arpacl

carrier-delay

carrier-delay { <sec_val> | msec <msec_val> } | no carrier-delay

Syntax Description

no

Negate a command or set its defaults

carrier-delay

Specify delay for interface transitions

sec_val

Carrier Transitions delay seconds

msec

Carrier Transitions delay milliseconds

msec_val

Carrier Transitions delay milliseconds

Command Mode

- /exec/configure/if-vlan-common

cbts-member tunnel-te

[no] cbts-member tunnel-te <tunnel-num>

Syntax Description

no

(Optional) Negate a command or set its defaults

cbts-member

Member Tunnel

tunnel-te

Tunnel Interface

tunnel-num

Tunnel Interface number

Command Mode

- /exec/configure/if-te

cd

cd <uri0>

Syntax Description

cd

Change current directory

uri0

Enter the name of the directory

Command Mode

- /exec

cdp advertise v1

cdp advertise { v1 | v2 } | no cdp advertise [ v1 | v2 ]

Syntax Description

no

Negate a command or set its defaults

cdp

Configure CDP parameters

advertise

Highest CDP version supported on the switch

v1

CDP Version 1

v2

CDP Version 2

Command Mode

- /exec/configure

cdp enable

[no] cdp enable

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP interface parameters

enable

Enable/disable CDP on the interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

cdp enable

[no] cdp enable

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP interface parameters

enable

Enable/disable CDP on all interfaces

Command Mode

- /exec/configure

cdp format device-id

[no] cdp format device-id { mac-address | serial-number | system-name }

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP parameters

format

Device ID format for CDP

device-id

Device ID format for CDP

mac-address

Mac-address of the Chassis

serial-number

Chassis Serial Number/OUI

system-name

System name/Fully Qualified Domain Name (Default)

Command Mode

- /exec/configure

cdp holdtime

[no] cdp holdtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP parameters

holdtime

CDP hold time advertised (in seconds)

i0

CDP hold time advertised (in seconds)

Command Mode

- /exec/configure

cdp timer

[no] cdp timer <i1>

Syntax Description

no

(Optional) Negate a command or set its defaults

cdp

Configure CDP parameters

timer

CDP refresh time interval (in seconds)

i1

CDP refresh time interval (in seconds)

Command Mode

- /exec/configure

certificate

certificate <file-name> <host-name> | no certificate

Syntax Description

no

Negate a command or set its defaults

certificate

Specify certificate

file-name

.pem certificate filename

host-name

hostname associated with certificate

Command Mode

- /exec/configure/telemetry

cfs clear message-context name session-id

cfs clear message-context name <cfs-dyn-app-name> session-id <i0>

Syntax Description

cfs

CFS parameters

clear

clear message context

message-context

clear message context

name

clear message context for given application

cfs-dyn-app-name

Registered name of the local application

session-id

Seesion id of message context

i0

Seesion id

Command Mode

- /exec

cfs debug all

cfs debug all

Syntax Description

cfs

CFS parameters

debug

Internal command for debugs

all

Internal command for debugs

Command Mode

- /exec

cfs distribute

[no] cfs distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

distribute

Enable fabric wide distribution

Command Mode

- /exec/configure

cfs eth cos

{ cfs eth cos <i0> | no cfs eth cos [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

eth

ETH configurations

cos

Configure CFS Ethernet COS value

i0

COS Value Range

Command Mode

- /exec/configure

cfs eth distribute

[no] cfs eth distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

eth

ETH configurations

distribute

Enable CFS distribution over Ethernet

Command Mode

- /exec/configure

cfs ipv4 distribute

[no] cfs ipv4 { distribute | mcast-address <ip0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv4

IPv4 configurations

distribute

Enable CFS distribution over IPv4

mcast-address

Configure IPv4 multicast address

ip0

Admin scope [239.255/16, 239.192/16-239.251/16]

Command Mode

- /exec/configure

cfs ipv6 distribute

[no] cfs ipv6 { distribute | mcast-address <ipv60> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

IPv6 configurations

distribute

Enable CFS distribution over IPv6

mcast-address

Configure IPv6 multicast address

Command Mode

- /exec/configure

cfs merge all-fabrics name

cfs merge all-fabrics name <cfs-dyn-app-name> [ vsan <i0> ]

Syntax Description

cfs

CFS parameters

merge

Resolve the merge failures

all-fabrics

Fabric wide within the scope of the application

name

Application name

cfs-dyn-app-name

Registered name of the local application

vsan

(Optional) For logical applications only

i0

(Optional) Vsan Id

Command Mode

- /exec

cfs region

[no] cfs region <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

region

Regions to limit the distribution scope of application(s)

i0

Region Id

Command Mode

- /exec/configure

change-password

change-password [ old-password <s1> new-password <s2> ]

Syntax Description

change-password

Change your password

old-password

(Optional) Current password for the user

s1

(Optional) Current password for the user (clear text)

new-password

(Optional) New password for the user

s2

(Optional) New password for the user (clear text)

Command Mode

- /exec

channel-group

channel-group <channel-id> [ mode { active | passive | on } ]

Syntax Description

channel-group

Configure port channel parameters

mode

(Optional) Specify channeling mode

active

(Optional) Set channeling mode to ACTIVE

passive

(Optional) Set channeling mode to PASSIVE

on

(Optional) Set channeling mode to ON

channel-id

Specify a port-channel number

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group

[no] channel-group [ <channel-id> [ mode { active | passive | on } ] ]

Syntax Description

no

Negate a command or set its defaults

channel-group

Configure port channel parameters

mode

(Optional) Specify channeling mode

active

(Optional) Set channeling mode to ACTIVE

passive

(Optional) Set channeling mode to PASSIVE

on

(Optional) Set channeling mode to ON

channel-id

(Optional) Specify a port-channel number

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group

[no] channel-group

Syntax Description

no

Negate a command or set its defaults

channel-group

Configure port channel parameters

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group force

channel-group <channel-id> force [ mode { active | passive | on } ] | no channel-group <channel-id> force [ mode { active | passive | on } ]

Syntax Description

no

Negate a command or set its defaults

channel-group

add to/remove from a port-channel

channel-id

Specify a port-channel number

force

Forcefully add a port

mode

(Optional) Specify channeling mode

active

(Optional) Set channeling mode to ACTIVE

passive

(Optional) Set channeling mode to PASSIVE

on

(Optional) Set channeling mode to ON

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

chassis-serial

chassis-serial <chas-ser> | no chassis-serial

Syntax Description

no

Negate the command

chassis-serial

Chassis serial number

chas-ser

Serial number

Command Mode

- /exec/configure/fex

checkpoint

checkpoint { [ <name> ] [ description <descr_str> ] | file <file_uri> }

Syntax Description

checkpoint

Create configuration rollback checkpoint

name

(Optional) Checkpoint name

file

Create configuration rollback checkpoint to file

file_uri

Checkpoint file path

description

(Optional) checkpoint description for the given checkpoint

descr_str

(Optional) checkpoint description(can include spaces)

Command Mode

- /exec

checkpoint

[no] checkpoint <chkpoint_name>

Syntax Description

no

Negate a command or set its defaults

checkpoint

Delete configuration rollback checkpoint

chkpoint_name

Checkpoint name

Command Mode

- /exec

cipher-suite

[no] cipher-suite <suite>

Syntax Description

cipher-suite

Configure Cipher Suite

suite

Cipher Suite options

Command Mode

- /exec/configure/macsec-policy

class-map

[no] class-map [ type qos ] [ <any_or_all> ] <cmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

(Optional) Specify the type of this class-map

qos

(Optional) Qos class

any_or_all

(Optional) Enter match-any or match-all

cmap-name

class-map name

Command Mode

- /exec/configure

class-map type control-plane

[no] class-map type control-plane [ <opt_any_or_all> ] <cmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

control-plane

Control-Plane

opt_any_or_all

(Optional) Enter match-any or match-all

cmap-name

Class-map name

Command Mode

- /exec/configure

class-map type network-qos

[no] class-map type network-qos [ match-any ] <cmap-name-nq>

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

network-qos

Network QoS class

match-any

(Optional) Match on any criteria

cmap-name-nq

class-map name

Command Mode

- /exec/configure

class-map type psp

[no] class-map type psp [ <any_or_all> ] { <cmap-name-plc> | { handle <ppf_id> } } [ sequence <seq_no> ] [ client <clienttype> <clientID> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

psp

PSP class

any_or_all

(Optional) Enter match-any or match-all

cmap-name-plc

class-map name

handle

Handle

ppf_id

PPF ID

sequence

(Optional) sequence

seq_no

(Optional) Sequence number

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

Command Mode

- /exec/configure

class-map type queuing

[no] class-map type queuing [ <any_or_all> ] { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> }

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

queuing

Queuing class

any_or_all

(Optional) Enter match-any

cmap-enum-name

xxx

xxx

zzz

zzz

cmap-dce-name

Queuing class-map name

cmap-name-hque

Hierarchical class-map name

Command Mode

- /exec/configure

class-map type queuing

[no] class-map type queuing { <cmap-dce-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

class-map

Configure a class map

type

Specify the type of this class-map

queuing

Queuing class

cmap-dce-name

Queuing class-map name

Command Mode

- /exec/configure

class

[no] class [ type qos ] <cmap-name> [ insert-before [ type qos1 ] <cmap-name2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

type

(Optional) Specify the type of class

qos

(Optional) Match on Qos class

cmap-name

class map name

insert-before

(Optional) Insert this class before another class

qos1

(Optional) Insert before Qos class

cmap-name2

(Optional) class map name

Command Mode

- /exec/configure/policy-map

class

class { <cmap-name> [ insert-before <cmap-name2> ] | class-default } | no class { <cmap-name> | class-default }

Syntax Description

no

Negate a command or set its defaults

class

Attach class map to policy map

cmap-name

Class-map name

insert-before

(Optional) Insert this class before another class

cmap-name2

(Optional) class map name before which insertion should happen

class-default

Use class default

Command Mode

- /exec/configure/pmap

class __inline__

[no] class __inline__ [ type psp ] <cmap-name-plc> [ insert-before <cmap-name2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

__inline__

Inline Class

type

(Optional) Specify the type of class

psp

(Optional) Match on PSP class

cmap-name-plc

class map name

insert-before

(Optional) Insert this class before another class

cmap-name2

(Optional) class map name

Command Mode

- /exec/configure/policy-map/type/plc

class class-default

[no] class class-default

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

class-default

System default class matching otherwise unclassified packets

Command Mode

- /exec/configure/policy-map

class type network-qos

[no] class type network-qos <cmap-name-nq>

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Match on network-qos class-map

type

Specify the type of this class-map

network-qos

Network QoS policy

cmap-name-nq

Match class-map name

Command Mode

- /exec/configure/policy-map/type/uf

class type network-qos class-default

[no] class type network-qos class-default

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Match on network-qos class-map

type

Specify the type of this class-map

network-qos

Network QoS policy

class-default

System default class matching otherwise not classified cos values

Command Mode

- /exec/configure/policy-map/type/uf

class type psp

[no] class type psp { <cmap-name-plc> | { handle1 <ppf_id1> } } [ insert-before { <cmap-name2> | { handle2 <ppf_id2> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

type

Specify the type of class

psp

Match on PSP class

cmap-name-plc

class map name

handle1

Handle1

ppf_id1

PPF ID1

insert-before

(Optional) Insert this class before another class

cmap-name2

(Optional) class map name

handle2

(Optional) Handle2

ppf_id2

(Optional) PPF ID2

Command Mode

- /exec/configure/policy-map/type/plc

class type queuing

[no] class type queuing { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> } [ insert-before type queuing1 yyy <xcmap-enum-name> ]

Syntax Description

xxx

xxx

yyy

(Optional) yyy

zzz

zzz

no

(Optional) Negate a command or set its defaults

class

Policy Criteria

type

Specify the type of class

queuing

Match on Queuing class

cmap-enum-name

cmap-dce-name

Queuing class-map name

cmap-name-hque

Hierarchical class-map name

insert-before

(Optional) Insert this class before another class

queuing1

(Optional) Insert before Queuing class

xcmap-enum-name

(Optional)

Command Mode

- /exec/configure/policy-map/type/queuing

clean ip bfd

clean ip bfd

Syntax Description

clean

Clean internal datastructures

ip

IP related information

bfd

clean ip bfd datastructures

Command Mode

- /exec

clean ipv6 bfd

clean ipv6 bfd

Syntax Description

clean

Clean internal datastructures

ipv6

IPV6 related information

bfd

clean ip bfd datastructures

Command Mode

- /exec

clear

clear { { ip eigrp [ <eigrp-ptag> ] topology { { <address> <mask> } | { <prefix> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] topology { <ipv6-prefix> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

topology

Clear IP-EIGRP topology table entry

address

Network to display information about

mask

Network mask

prefix

IP prefix <network>/<length>, e.g., 192.168.0.0/16

eigrp-ptag

(Optional)

Command Mode

- /exec

clear

clear { { ip route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ip-addr> | <ip-prefix> } [ <nh-addr> | <nh-addr-v6> ] [ <nh-interface> ] } } [ no-ufdm ]

Syntax Description

clear

Reset functions

route

Clear routing information

routing

Clear routing information

vrf

(Optional) Clear per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

Clear IP commands

ipv4

(Optional) Clear IP commands

unicast

(Optional) Clear unicast information

topology

(Optional) Clear per-topology information

topology-name

(Optional) Topology name

all

Clear all routes

ip-addr

Clear single host route

ip-prefix

Clear single exact match route

nh-addr

(Optional) Clear single path

nh-interface

(Optional) Interface Name

no-ufdm

(Optional) Do not tell UFDM about the change

Command Mode

- /exec

clear

clear { { ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] ipv6 [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ipv6-addr> | <ipv6-prefix> } [ <nh-addr> <nh-interface> ] } } [ no-ufdm ]

Syntax Description

clear

Reset functions

route

Clear routing information

routing

Clear routing information

vrf

(Optional) Clear per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Clear IPv6 commands

unicast

(Optional) Clear unicast information

topology

(Optional) Clear per-topology information

topology-name

(Optional) Topology name

all

Clear all routes

nh-interface

(Optional) Interface Name

no-ufdm

(Optional) Do not tell UFDM about the change

Command Mode

- /exec

clear

clear { { ip eigrp [ <eigrp-ptag> ] neighbors { * | <address> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] neighbors { * | <ipv6-addr> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

neighbors

Clear EIGRP neighbors

*

Clear all EIGRP neighbors

address

IP-EIGRP neighbor address

interface

Interface

soft

(Optional) Soft reset

no-goodbye

(Optional) No goodbye

eigrp-ptag

(Optional)

Command Mode

- /exec

clear aaa local user blocked username

clear aaa local user blocked { username <s0> | all }

Syntax Description

clear

Reset functions

aaa

Configure aaa functions

local

Local username

user

Local system user

blocked

Clear blocked user

username

Blocked username

s0

Enter the username

all

Clear all the blocked users

Command Mode

- /exec

clear access-list counters

clear [ <ip_ipv6_mac> ] access-list counters [ <name> ]

Syntax Description

clear

Reset functions

ip_ipv6_mac

(Optional) IP/IPv6/MAC

access-list

Clear access list statistical information

counters

Clear access list counters

name

(Optional) List name

Command Mode

- /exec

clear access-list hardware counters

clear access-list hardware counters [ module <module> ]

Syntax Description

clear

Reset functions

access-list

Clear access list statistical information

hardware

hardware information

counters

Clear access list counters

module

(Optional) Slot/module

module

(Optional) Slot/module number

Command Mode

- /exec

clear access-list ipsg stats

clear access-list ipsg stats [ module <module> ] [ instance <instance_number> ]

Syntax Description

clear

Reset functions

access-list

access-list

ipsg

ipsg

stats

Clear Statistics of IPSG drop entries

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance_number

(Optional) ASIC Instance Number in Decimal

Command Mode

- /exec

clear accounting log

clear accounting log

Syntax Description

clear

Reset functions

accounting

Clear accounting log(s) in all vdcs

log

Clear the accounting log(s) in all vdcs

Command Mode

- /exec

clear aclqos cl-qos

clear aclqos cl-qos

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

cl-qos

cl-qos logs of ACLQOS

Command Mode

- /exec

clear aclqos fab

clear aclqos fab

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

fab

Fabric logs of ACLQOS

Command Mode

- /exec

clear aclqos fc

clear aclqos fc

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

fc

fc logs of ACLQOS

Command Mode

- /exec

clear aclqos libdrv

clear aclqos libdrv

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

libdrv

libdrv logs of ACLQOS

Command Mode

- /exec

clear aclqos map

clear aclqos map

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

map

map logs of ACLQOS

Command Mode

- /exec

clear aclqos merge

clear aclqos merge

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

merge

merge logs of ACLQOS

Command Mode

- /exec

clear aclqos pl

clear aclqos pl

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

pl

pl logs of ACLQOS

Command Mode

- /exec

clear aclqos ppf-parse

clear aclqos ppf-parse

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

ppf-parse

ppf-parse logs of ACLQOS

Command Mode

- /exec

clear aclqos ppf

clear aclqos ppf

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

ppf

ppf logs of ACLQOS

Command Mode

- /exec

clear aclqos qng-hw

clear aclqos qng-hw

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

qng-hw

Qng logs of ACLQOS

Command Mode

- /exec

clear aclqos qng

clear aclqos qng

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

qng

Qng logs of ACLQOS

Command Mode

- /exec

clear aclqos rl

clear aclqos rl

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

rl

RL logs of ACLQOS

Command Mode

- /exec

clear aclqos rm

clear aclqos rm

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

rm

RM logs of ACLQOS

Command Mode

- /exec

clear aclqos sch

clear aclqos sch

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

sch

Sch logs of ACLQOS

Command Mode

- /exec

clear aclqos stats

clear aclqos stats

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

stats

stats logs of ACLQOS

Command Mode

- /exec

clear aclqos tbl

clear aclqos tbl

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

tbl

tbl logs of ACLQOS

Command Mode

- /exec

clear aclqos trace-detail

clear aclqos trace-detail

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

trace-detail

detail logs of ACLQOS

Command Mode

- /exec

clear aclqos trace

clear aclqos trace

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

trace

trace logs of ACLQOS

Command Mode

- /exec

clear aclqos uf

clear aclqos uf

Syntax Description

clear

Reset functions

aclqos

Configure aclqos debug

uf

UF logs of ACLQOS

Command Mode

- /exec

clear bfd statistics

clear bfd statistics

Syntax Description

clear

Clear

bfd

bfd

statistics

statistics

Command Mode

- /exec

clear bgp

clear bgp { ipv4 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospf | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor <neighbor-id> [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network { <ip-addr> mask <ip-mask> | <ip-prefix> } } | { aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } { suppress-map | advertise-map } } } | { vpnv4 | vpnv6 } unicast policy statistics { neighbor <neighbor-id> [ { route-map | filter-list | prefix-list } { in | out } ] } | ipv6 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospfv3 | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network <ipv6-prefix> } | { aggregate-address <ipv6-prefix> { suppress-map | advertise-map } } } }

Syntax Description

clear

Reset functions

ipv4

Clear IPv4 address-family

ipv6

Clear IPv6 address-family

vpnv4

Clear VPNv4 address-family

vpnv6

Clear VPNv6 address-family

bgp

Clear BGP sessions

unicast

Clear unicast address-family

multicast

Clear multicast address-family

policy

Clear policy related information

statistics

Clear Route Filter statistics

redistribute

Statistics for redistribution

isis

(Optional) ISO IS-IS

ospf

(Optional) Open Shortest Path First (OSPF)

ospfv3

(Optional) Open Shortest Path First v3

rip

(Optional) Routing Information Protocol

eigrp

(Optional) Enhanced Interior Gateway Protocol

static

(Optional) Static routes

direct

(Optional) Directly connected

amt

(Optional) AMT anycast prefix

lisp

(Optional) LISP EID-prefixes in the non-default VRF

hmm

(Optional) HMM prefix

am

(Optional) AM routes (learned via ARP)

tag

(Optional) Source protocol tag

neighbor

Clear neighbor specific counters

neighbor-id

Neighbor IPv4 address

route-map

(Optional) Neighbor route-map

prefix-list

(Optional) Neighbor prefix-list

filter-list

(Optional) Neighbor filter-list

out

(Optional) Outbound policy

in

(Optional) Inbound policy

default-originate

(Optional) Default-originate policy

dampening

Clear dampening info

network

Configured IP prefix to advertise

aggregate-address

Configured BGP aggregate prefixes

suppress-map

Statistics of suppress policy

advertise-map

Statistics of advertise policy

ip-addr

IP network advertised

mask

Configured mask of the IP prefix advertised

ip-mask

Dotted 4-octet mask

ip-prefix

IP prefix in CIDR format

Command Mode

- /exec

clear bgp bmp stats server

clear bgp bmp stats server { <server-id> | all }

Syntax Description

clear

Reset functions

bgp

Clear BGP sessions

bmp

Clear BMP

stats

Server Stats

server

BMP Server

server-id

Server ID

all

All BMP Servers

Command Mode

- /exec

clear bgp event-history

clear bgp event-history { <bgp-event-hist> | detail | periodic | errors | objstore | all | msgs }

Syntax Description

clear

Reset functions

bgp

Clear BGP sessions

event-history

Clear event-history buffers

bgp-event-hist

Event History

errors

Show error logs of BGP

objstore

Show objstore logs of BGP

periodic

Show periodic logs of BGP

detail

Show detailed event logs

all

All event history buffers

msgs

Clear message logs of BGP

Command Mode

- /exec

clear bgp private

clear bgp private { all | global | threads | session | debug | io | memory | af | damp | lists | attr [ <ip-prefix> | <ipv6-prefix> ] | rpm-info [ <rpm-name> { <ip-prefix> | <ipv6-prefix> } ] | neighbor { <neighbor-id> | <ipv6-neighbor-id> } | slab | mqstat | ipc | rnh | rpm-attribute-cache | rpm-comm-attr-cache | peer-template <peer-template-name> | aggregates [ summary ] | bestpath }

Syntax Description

clear

Reset functions

bgp

Clear BGP sessions

private

Clear internal BGP counters

all

Clear all info

global

Clear global info

threads

Clear thread info

session

Clear session info

debug

Clear debug info

io

Clear IO info

memory

Clear memory info

af

Clear AF info

damp

Clear dampening info

lists

Clear BGP internal lists

attr

Clear BGP attributes

rpm-info

Clear BGP policy outbound info

ip-prefix

(Optional) Clear attribute for a prefix

neighbor

Clear neighbor specific counters

neighbor-id

Neighbor IP address

rpm-name

(Optional) Route-map name

slab

Clear information about SLABs used

mqstat

Clear message queue stats

ipc

Clear ipc information

rnh

Clear recursive next hops

aggregates

Clear information about aggregates

rpm-attribute-cache

Clear rpm attribute cache statistics

rpm-comm-attr-cache

Clear rpm community attribute cache statistics

peer-template

Clear information about a peer-template

bestpath

Clear internal information about bestpath

summary

(Optional) Summary only

peer-template-name

Peer-template name

Command Mode

- /exec

clear bootvar log

clear bootvar log

Syntax Description

clear

Reset functions

bootvar

Clear the bootvar log

log

Clear the bootvar log

Command Mode

- /exec

clear cdp counters

clear cdp { counters [ interface <if0> ] | table [ interface1 <if1> ] }

Syntax Description

clear

Reset functions

cdp

Cisco Discovery Protocol

counters

Clear CDP counters on all interfaces

interface

(Optional) Clear CDP counters on an interface

if0

(Optional)

table

Clear CDP cache on all interfaces

interface1

(Optional) Clear CDP cache on an interface

if1

(Optional)

Command Mode

- /exec

clear checkpoint database

clear checkpoint database [ user | system ]

Syntax Description

clear

Reset functions

checkpoint

Clear configuration rollback checkpoint

database

Clear configuration rollback checkpoint database

user

(Optional) Clear configuration rollback checkpoint database for user checkpoints

system

(Optional) Clear configuration rollback checkpoint database for system checkpoints

Command Mode

- /exec

clear cli history

clear cli history

Syntax Description

clear

Reset functions

cli

debug cli

history

history of cli commands

Command Mode

- /exec

clear clis event-history objstr

clear clis event-history { objstr | objstr-errors }

Syntax Description

clear

Reset functions

clis

cli server

event-history

Event history logs for clis

objstr

Log of Object Store events

objstr-errors

Log of Object Store error events

Command Mode

- /exec

clear controller accounting log

clear controller <ctrl-id> accounting log

Syntax Description

clear

Show running system information

controller

Controller command

ctrl-id

Controller id value

accounting

Accounting

log

Clear log information

Command Mode

- /exec

clear copp statistics

clear copp statistics

Syntax Description

clear

Reset functions

copp

Clear policy information for copp

statistics

Clear statistics

Command Mode

- /exec

clear cores

clear cores

Syntax Description

clear

Reset functions

cores

clear all core dumps for the switch

Command Mode

- /exec

clear cores archive

clear cores archive [ file <s0> ]

Syntax Description

clear

Reset functions

cores

clear all cores for this vdc

archive

clear all core dump files for this vdc from logflash on this module

file

(Optional) delete a core file on logflash

s0

(Optional) Name of file in directory 'core

Command Mode

- /exec

clear counters

clear counters

Syntax Description

clear

Reset functions

counters

Clear counters

Command Mode

- /exec

clear counters buffers

clear counters buffers [ module <module> [ instance <instance> ] ] [ __readonly__ <clear_valid> ]

Syntax Description

clear

Reset functions

counters

Clear counters

buffers

Clear system buffer max cell usage counter

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance

(Optional) ASIC Instance Number in Decimal

__readonly__

(Optional) Read Only

clear_valid

(Optional) Clear

Command Mode

- /exec

clear counters interface

clear counters interface <ifindex>

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

ifindex

Clear interface counters

Command Mode

- /exec

clear counters interface all

clear counters interface all

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

all

Clear all interface counters

Command Mode

- /exec

clear counters interface snmp

clear counters interface <ifindex> snmp

Syntax Description

clear

Reset functions

counters

Clear counters

interface

Clear interface counters

ifindex

Clear interface counters

snmp

Clear snmp interface counters

Command Mode

- /exec

clear counters mpls strip

clear counters mpls strip

Syntax Description

clear

Reset functions

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

counters

stats/counters for labels

Command Mode

- /exec

clear debug-logfile

clear debug-logfile <s0>

Syntax Description

clear

Reset functions

debug-logfile

Remove the debug logfile

s0

Provide name of the file

Command Mode

- /exec

clear debug logfile

clear debug logfile <s0>

Syntax Description

clear

Reset functions

debug

Debugging functions

logfile

Remove the debug logfile

s0

Provide name of the file

Command Mode

- /exec

clear eigrp event-history

clear eigrp [ <eigrp-ptag> ] event-history [ cli | notifications | all ]

Syntax Description

clear

Reset functions

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Clear the event history buffers

notifications

(Optional) EIGRP Notifications

cli

(Optional) EIGRP CLI related events

all

(Optional) All event history buffers

Command Mode

- /exec

clear evb hosts

clear evb { hosts | vsi } [ force-standby ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ]

Syntax Description

clear

Reset functions

evb

EVB (Edge Virtual Bridge)

hosts

Clear EVB host information

vsi

Clear EVB vsi information

force-standby

(Optional) Force to clear standby entries

mac

(Optional) Clear entries by filtering MAC address

mac-addr

(Optional) MAC Address

interface

(Optional) Clear entries by filtering interface

intf-name

(Optional) Interface name

vlan

(Optional) Clear entries by filtering VLAN

vlan-id

(Optional) VLAN ID

vni

(Optional) Clear entries by filtering VNI

vni-id

(Optional) VNI

ip

(Optional) Clear entries by filtering IP address

ipv6

(Optional) Clear entries by filtering IPv6 address

ip-addr

(Optional) IPV4 host address

Command Mode

- /exec

clear evb hosts

clear evb { hosts | vsi } [ force-standby ] *

Syntax Description

clear

Reset functions

evb

EVB (Edge Virtual Bridge)

hosts

Clear EVB host information

vsi

Clear EVB vsi information

force-standby

(Optional) Force to clear standby entries

*

Clear all entries (Should be a * character)

Command Mode

- /exec

clear evb statistics

clear evb statistics

Syntax Description

clear

Reset functions

evb

EVB (Edge Virtual Bridge)

statistics

Clear EVB Statistics

Command Mode

- /exec

clear fabric database dci vrf node-id

clear fabric database dci vrf { <vrf-name> | <vrf-known-name> } node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]

Syntax Description

clear

Reset functions

fabric

Fabric

database

Fabric Database

dci

DCI profile

vrf

Display per-VRF information

vrf-name

VRF name

vrf-known-name

Known VRF name

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

Command Mode

- /exec

clear fabric database host all vni

{ clear fabric database host { all | { vni <vni-id> } | { dot1q <vlan-id> } } [ re-sync ] } | { clear fabric database host vni <vni-id> re-apply } | { clear fabric database client uuid <uuid> }

Syntax Description

clear

Reset functions

fabric

database

host

Active Host to profile mapping

vni

Virtual Network Identifier

vni-id

dot1q

Dot1Q Encapsulation

vlan-id

re-apply

Download new config parameters and re-apply

re-sync

(Optional) Force to sync the host entry

all

Remove all entries

client

Auto-config client

uuid

Auto-config client UUID

uuid

UUID

Command Mode

- /exec

clear fabric database host statistics

clear fabric database host statistics

Syntax Description

clear

Reset functions

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

statistics

Statistics

Command Mode

- /exec

clear fabric database include-vrf

clear fabric database include-vrf <vrf-name>

Syntax Description

clear

Reset functions

fabric

database

include-vrf

Include VRF name

vrf-name

VRF name

Command Mode

- /exec

clear fabric database statistics

clear fabric database statistics [ type { network | profile | cabling | partition | bl-dci } [ server-proto ldap { ipv6 <ipv6addr> | ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] ]

Syntax Description

clear

Reset functions

fabric

Fabric

database

Clear Fabric Database

statistics

Clear database statistics

type

(Optional) Enter database type

network

(Optional) Network Database

profile

(Optional) Port or Switch Profile Database

cabling

(Optional) Cable Management Database

partition

(Optional) Partition Database

bl-dci

(Optional) Border Leaf - DCI

server-proto

(Optional) Enter database protocol

ldap

(Optional) Use LDAP

ipv6

(Optional) IPv6 address of server

ip

(Optional) IP address of server

ipaddr

(Optional) Enter IP address of server

host

(Optional) Hostname of server

hostname

(Optional) Enter hostname of server

port

(Optional) Port

portnum

(Optional) Enter port number

vrf

(Optional) vrf context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear fabric database statistics type server-proto xmpp ip

clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto xmpp { ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

fabric

Fabric

database

Clear Fabric Database

statistics

Clear database statistics

type

Enter database type

network

Network Database

profile

Port or Switch Profile Database

cabling

Cable Management Database

partition

Partition Database

bl-dci

Border Leaf - DCI

server-proto

Enter database protocol

xmpp

Use XMPP

ip

IP address of server

ipaddr

Enter IP address of server

host

Hostname of server

hostname

Enter hostname of server

port

(Optional) Port

portnum

(Optional) Enter port number

vrf

(Optional) vrf context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear fabric database statistics type server-proto radius group

clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto radius group <groupname>

Syntax Description

clear

Reset functions

fabric

Fabric

database

Clear Fabric Database

statistics

Clear database statistics

type

Enter database type

network

Network Database

profile

Port or Switch Profile Database

cabling

Cable Management Database

partition

Partition Database

bl-dci

Border Leaf - DCI

server-proto

Enter database protocol

radius

Use RADIUS

group

AAA group

groupname

Enter AAA group name of servers

Command Mode

- /exec

clear fabricpath counters dropped

clear fabricpath counters dropped [ module <module> ] [ __readonly__ <mod_bmp> <vdc_id> <msg> ]

Syntax Description

clear

Reset functions

fabricpath

clear fabricpath information

counters

Clear fabricpath counters

dropped

Packets dropped due to various vlan errors

module

(Optional) Specify one counter

module

(Optional) Module number

__readonly__

(Optional) Read Only

mod_bmp

(Optional) Bitmap of valid modules

vdc_id

(Optional) Current VDC id

msg

(Optional) Message to give details about command execution

Command Mode

- /exec

clear fabricpath isis adjacency

clear fabricpath isis [ <l2mp-isis-tag> ] adjacency { * | { <interface> | system-id <sid> } + }

Syntax Description

clear

Reset functions

fabricpath

Clear fabricpath information

isis

Fabricpath IS-IS information

l2mp-isis-tag

(Optional) Fabricpath domain tag

adjacency

Clear IS-IS adjacency state

*

IS-IS adjacencies on all interfaces

interface

IS-IS interface

system-id

Hostname or System ID

sid

Hostname or System ID (in the form of XXXX.XXXX.XXXX)

Command Mode

- /exec

clear fabricpath isis statistics

clear fabricpath isis [ <l2mp-isis-tag> ] statistics *

Syntax Description

clear

Reset functions

fabricpath

Clear fabricpath information

isis

Fabricpath IS-IS information

l2mp-isis-tag

(Optional) Fabricpath domain tag

statistics

Clear IS-IS protocol statistics

*

All IS-IS protocol statistics

Command Mode

- /exec

clear fabricpath isis traffic

clear fabricpath isis [ <l2mp-isis-tag> ] traffic { * | <interface> }

Syntax Description

clear

Reset functions

fabricpath

Clear fabricpath information

isis

Fabricpath IS-IS information

l2mp-isis-tag

(Optional) Fabricpath domain tag

traffic

Clear IS-IS traffic information

*

All IS-IS traffic information

interface

IS-IS interface

Command Mode

- /exec

clear flow exporter

clear flow exporter [ name ] <exportername>

Syntax Description

clear

Reset functions

flow

NetFlow information

exporter

Clear NetFlow exporter statistics

name

(Optional) The name of the exporter

exportername

Specify an exporter

Command Mode

- /exec

clear flow monitor

clear flow monitor [ name ] <monitorname> [ cache [ force-export ] | statistics ]

Syntax Description

clear

Reset functions

flow

NetFlow information

monitor

Clear monitor cache and statistics

name

(Optional) The name of the monitor

monitorname

Specify a monitor

cache

(Optional) Clear only monitor cache contents

force-export

(Optional) Force the cache entries to be exported

statistics

(Optional) Clear only the monitor cache statistics

Command Mode

- /exec

clear forwarding adjacency module

clear forwarding [ ip | ipv4 ] { adjacency } [ vrf <vrf-name> ] { <ip-addr> | all_routes } module { all_modules | <module> } [ force-delete ] [ no-urib ]

Syntax Description

clear

forwarding

forwarding information

ip

(Optional) ipv4

ipv4

(Optional) ipv4

adjacency

adjacency

vrf

(Optional) delete routes for a specific vrf

vrf-name

(Optional) VRF name

ip-addr

IPV4 source address

all_routes

delete all routes

module

module

all_modules

all module's

module

module number

no-urib

(Optional) Do not tell URIB about changes

force-delete

(Optional) Forcefully remove adj

Command Mode

- /exec

clear forwarding adjacency mpls stats

clear forwarding [ ip | ipv4 ] adjacency mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ <aif> ] [ <anh> ] [ module <module> ]

Syntax Description

clear

Reset functions

forwarding

forwarding

adjacency

display adjacency information

mpls

mpls adjacency information

stats

Clear adjacency statistics

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) ipv4

ipv4

(Optional) ipv4

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next hop

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding cumulative counter

clear forwarding cumulative counter [ all | v4_ucast_add | v4_ucast_del | v6_ucast_add | v6_ucast_del ] [ module <module> ]

Syntax Description

clear

clear

forwarding

forwarding information

cumulative

accumulated prefix add/delete count

counter

counter

all

(Optional) all

v4_ucast_add

(Optional) IPv4 unicast route add count

v4_ucast_del

(Optional) IPv4 unicast route delete count

v6_ucast_add

(Optional) IPv6 unicast route add count

v6_ucast_del

(Optional) IPv6 unicast route delete count

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding distribution lisp counters all

clear forwarding distribution lisp counters all

Syntax Description

clear

forwarding

forwarding

distribution

fib distribution information

lisp

lisp application

counters

counters

all

all vrf's

Command Mode

- /exec

clear forwarding events-history

clear forwarding events-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

events-history

Events history

Command Mode

- /exec

clear forwarding inconsistency

clear forwarding [ ipv4 | ip ] [ unicast ] inconsistency

Syntax Description

clear

clear

forwarding

forwarding

ip

(Optional) ipv4

ipv4

(Optional) ipv4

unicast

(Optional) unicast

inconsistency

route inconsistency check

Command Mode

- /exec

clear forwarding ipv4 multicast counters

clear forwarding ipv4 multicast counters [ vrf { <vrf-name> | <vrf-known-name> | all } ] { [ group <gaddr> [ source <saddr> ] ] | [ source <saddr> [ group <gaddr> ] ] } [ module <module> ]

Syntax Description

clear

forwarding

fib information

vrf

(Optional) Specify VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv4

Ipv4

multicast

Multicast IPv4 information

counters

group

(Optional) Multicast IPv4 Group specific info

gaddr

(Optional) Multicast IPv4 Group Address

source

(Optional) Multicast IPv4 Source specific info

saddr

(Optional) Multicast IPv4 Source Address

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding ipv6-l3-route-history

clear forwarding ipv6-l3-route-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

ipv6-l3-route-history

IPV6 L3 Route history

Command Mode

- /exec

clear forwarding ipv6 adjacency module

clear forwarding ipv6 adjacency [ vrf <vrf-name> ] { <ip-addr> | all_adjs } module { all_modules | <module> } [ force-delete ] [ no-urib ]

Syntax Description

clear

forwarding

forwarding information

ipv6

ipv6

adjacency

adjacency

vrf

(Optional) delete routes for a specific vrf

vrf-name

(Optional) VRF name

all_adjs

delete all adjs

module

module

all_modules

all module's

module

module number

no-urib

(Optional) Do not tell URIB about changes

force-delete

(Optional) Forcefully remove adj

Command Mode

- /exec

clear forwarding ipv6 adjacency mpls stats

clear forwarding ipv6 adjacency mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ <aif> ] [ <anh> ] [ module <module> ]

Syntax Description

clear

Reset functions

forwarding

forwarding

ipv6

ipv6

adjacency

adjacency information

mpls

mpls adjacency information

stats

Clear adjacency statistics

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

aif

(Optional) adjacency output interface

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding ipv6 inconsistency

clear forwarding ipv6 [ unicast ] inconsistency

Syntax Description

clear

clear

forwarding

forwarding

ipv6

ipv6

unicast

(Optional) unicast

inconsistency

route inconsistency check

Command Mode

- /exec

clear forwarding ipv6 multicast counters

clear forwarding ipv6 multicast counters [ vrf { <vrf-name> | <vrf-known-name> | all } ] { [ group <gaddr> [ source <saddr> ] ] | [ source <saddr> [ group <gaddr> ] ] } [ module <module> ]

Syntax Description

clear

forwarding

fib information

vrf

(Optional) Specify VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv6

Ipv6

multicast

Multicast IPv6 information

counters

group

(Optional) Multicast IPv6 Group specific info

source

(Optional) Multicast IPv6 Source specific info

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding ipv6 route module

clear forwarding ipv6 { route } [ vrf <vrf-name> ] { <prefix> | all_routes } module { all_modules | <module> } [ no-urib ]

Syntax Description

clear

forwarding

forwarding information

ipv6

ipv6

route

route

vrf

(Optional) delete routes for a specific vrf

vrf-name

(Optional) VRF name

all_routes

delete all routes

module

module

all_modules

all module's

module

module number

no-urib

(Optional) Do not tell URIB about changes

Command Mode

- /exec

clear forwarding l2-mc-route-history

clear forwarding l2-mc-route-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l2-mc-route-history

L2 MacgRoute history

Command Mode

- /exec

clear forwarding l2-oiflist-history

clear forwarding l2-oiflist-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l2-oiflist-history

L2 Oiflist history

Command Mode

- /exec

clear forwarding l2-route-history

clear forwarding l2-route-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l2-route-history

L2 Route history

Command Mode

- /exec

clear forwarding l2mcast info l2-oiflist-history

clear forwarding l2mcast info l2-oiflist-history [ module <num> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l2mcast

l2mcast

info

L2mcast Internal Info

l2-oiflist-history

L2 oiflist history

module

(Optional) Slot

num

(Optional) Slot number

Command Mode

- /exec

clear forwarding l2mcast info l2-route-history

clear forwarding l2mcast info l2-route-history [ module <num> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l2mcast

l2mcast

info

L2mcast Internal Info

l2-route-history

L2 Route history

module

(Optional) Slot

num

(Optional) Slot number

Command Mode

- /exec

clear forwarding l2mcast info l2-xbar-history

clear forwarding l2mcast info l2-xbar-history [ module <num> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l2mcast

l2mcast

info

L2mcast Internal Info

l2-xbar-history

L2 Route history

module

(Optional) Slot

num

(Optional) Slot number

Command Mode

- /exec

clear forwarding l2mcast info statistics

clear forwarding l2mcast info statistics [ module <num> ]

Syntax Description

clear

Clear all entries

forwarding

Forwarding Information

l2mcast

Layer-2 multicast

info

L2mcast Internal Info

statistics

L2mcast Internal Info Statistics

module

(Optional) Slot

num

(Optional) Slot number

Command Mode

- /exec

clear forwarding l2vpn trace member-history

clear forwarding l2vpn trace member-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l2vpn

L2VPN

trace

internal trace

member-history

member history

Command Mode

- /exec

clear forwarding l3-route-history

clear forwarding l3-route-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

l3-route-history

L3 Route history

Command Mode

- /exec

clear forwarding mpls drop-stats

clear forwarding mpls drop-stats

Syntax Description

clear

Clear Statistics

forwarding

forwarding

mpls

mpls forwarding

drop-stats

Clear dropped packets stats

Command Mode

- /exec

clear forwarding mpls stats

clear forwarding mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ table <table_id> ] [ [ label <label> | <prefix> | <v6prefix> ] | [ label-space <label-space-id> ] ] [ module <module> ]

Syntax Description

clear

Reset functions

forwarding

forwarding

mpls

mpls

stats

Clear Input Statistics

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known vrf name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

label-space

(Optional) label space

label-space-id

(Optional) label space id

label

(Optional) mpls labels

label

(Optional) mpls label value

prefix

(Optional) Labels for single exact match route

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding mpls trace adj-history

clear forwarding mpls trace adj-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

mpls

mpls

trace

internal trace

adj-history

adjacency history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding mpls trace ecmp-history

clear forwarding mpls trace ecmp-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

mpls

mpls

trace

internal trace

ecmp-history

ECMP history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding mpls trace label-history

clear forwarding mpls trace label-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

mpls

mpls

trace

internal trace

label-history

label history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding mpls trace te-history

clear forwarding mpls trace te-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

mpls

mpls

trace

internal trace

te-history

TE history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding oiflist-history

clear forwarding oiflist-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

oiflist-history

Oiflist history

Command Mode

- /exec

clear forwarding route module

clear forwarding [ ip | ipv4 ] { route } [ vrf <vrf-name> ] { <prefix> | all_routes } module { all_modules | <module> } [ no-urib ]

Syntax Description

clear

forwarding

forwarding information

ip

(Optional) ipv4

ipv4

(Optional) ipv4

route

route

vrf

(Optional) delete routes for a specific vrf

vrf-name

(Optional) VRF name

prefix

delete specific prefix

all_routes

delete all routes

module

module

all_modules

all module's

module

module number

no-urib

(Optional) Do not tell URIB about changes

Command Mode

- /exec

clear forwarding trace ecmp-history

clear forwarding trace ecmp-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

ecmp-history

ECMP history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace mfib oif-history

clear forwarding trace mfib oif-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

mfib

mfib entries

oif-history

oif history

Command Mode

- /exec

clear forwarding trace mfib oiflist-history

clear forwarding trace mfib oiflist-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

mfib

mfib entries

oiflist-history

oiflist history

Command Mode

- /exec

clear forwarding trace mfib v4-route-history

clear forwarding trace mfib v4-route-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

mfib

clear mfib entries

v4-route-history

v4 route history

Command Mode

- /exec

clear forwarding trace mfib v6-route-history

clear forwarding trace mfib v6-route-history

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

mfib

mfib entries

v6-route-history

v6 route history

Command Mode

- /exec

clear forwarding trace nve-ir-peer-history

clear forwarding trace nve-ir-peer-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

nve-ir-peer-history

NVE ir-peer history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace nve-l3-vni-history

clear forwarding trace nve-l3-vni-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

nve-l3-vni-history

NVE L3 VNI history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace nve-peer-history

clear forwarding trace nve-peer-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

nve-peer-history

NVE peer history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace otv-adj-history

clear forwarding trace otv-adj-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

otv-adj-history

otv adj history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace otv-vlan-history

clear forwarding trace otv-vlan-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

otv-vlan-history

otv vlan prefix history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace v4-adj-history

clear forwarding trace v4-adj-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

v4-adj-history

V4 adjacency history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace v4-pfx-history

clear forwarding trace v4-pfx-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

v4-pfx-history

V4 prefix history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace v4-rnh-history

clear forwarding trace v4-rnh-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

v4-rnh-history

V4 rnh history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace v6-adj-history

clear forwarding trace v6-adj-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

v6-adj-history

V6 adjacency history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace v6-pfx-history

clear forwarding trace v6-pfx-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

v6-pfx-history

V6 prefix history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace v6-rnh-history

clear forwarding trace v6-rnh-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

v6-rnh-history

V6 rnh history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear forwarding trace vobj-history

clear forwarding trace vobj-history [ module <module> ]

Syntax Description

clear

Clear bintrace entries

forwarding

forwarding

trace

internal trace

vobj-history

vobj history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

clear frame traffic

clear frame traffic

Syntax Description

clear

Reset functions

frame

Clear layer-2 frame statistics to/from the Route Processor

traffic

Clear layer-2 frame statistics to/from the Route Processor

Command Mode

- /exec

clear fs-daemon log

clear fs-daemon log

Syntax Description

clear

Reset functions

fs-daemon

Clear the fs daemon log

log

Clear the fs daemon log

Command Mode

- /exec

clear hardware flow ip

clear hardware flow ip [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]

Syntax Description

clear

Reset functions

hardware

Show hardware information

flow

Netflow Module

ip

Internet Protocol Version 4

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

force-export

(Optional) Force to export data to collector

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

clear hardware flow ipmac

clear hardware flow ipmac [ { { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ module <num> ]

Syntax Description

clear

Reset functions

hardware

Show hardware information

flow

Netflow Module

ipmac

IPv4+MAC

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

clear hardware flow ipv6

clear hardware flow ipv6 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]

Syntax Description

clear

Reset functions

hardware

Show hardware information

flow

Netflow Module

ipv6

Internet Protocol Version 6

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

force-export

(Optional) Force to export data to collector

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

clear hardware flow l2

clear hardware flow l2 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]

Syntax Description

clear

Reset functions

hardware

Show hardware information

flow

Netflow Module

l2

Layer 2 Protocol

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

instance

(Optional) Instance

inst

(Optional) Earl Instance

force-export

(Optional) Force to export data to collector

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

clear hardware flow mpls

clear hardware flow mpls [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]

Syntax Description

clear

Reset functions

hardware

Show hardware information

flow

Netflow Module

mpls

MPLS Protocol

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

force-export

(Optional) Force to export data to collector

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

clear hardware ip verify

clear hardware [ forwarding ] ip verify { all | address { source { broadcast | multicast } | class-e | destination { zero } | identical | reserved } | checksum | protocol | fragment | length { minimum | consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version } [ module <module> ]

Syntax Description

clear

Reset functions

hardware

Show hardware information

forwarding

(Optional) Show hardware information for forwarding path

ip

IPv4 and IPv6 protocols

verify

IP packet validation checks in hardware

class-e

Class E IDS check

all

All IP packet validation checks

address

IPv4 and IPv6 Source and destination address validation

source

Check source address

broadcast

Source address is 255.255.255.255

multicast

Source address is 224.x.x.x

destination

Check destination address

zero

Destination address is 0.0.0.0

identical

Same IP SA and DA

reserved

Source address is 127.x.x.x

checksum

Verify IPv4 and IPv6 packet checksum

protocol

Verify IP procotol

fragment

Check IPv4 and IPv6 fragment with non-zero offset and DF bit active

length

Validate IPv4 packet header and payload length

minimum

Minimum IPv4 header length

consistent

Actual frame size is equal to or more than IPv4 length plus ethernet header

maximum

Check max fragment offset and payload length

max-frag

Fragment offset field value

udp

Maximum UDP length has to be less than IPv4 payload length

max-tcp

Maximum TCP length has to be less than IPv4 payload length

tcp

Validate TCP packet header

tiny-frag

Check TCP tiny fragment

version

Must be 4 for an ethertype of IPv4 (0x0800)

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec

clear hardware rate-limiter

clear hardware rate-limiter { all | layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> | span-egress } [ module <module> ]

Syntax Description

clear

Reset functions

hardware

Show hardware information

rate-limiter

Clear Rate-Limiter statistics

all

Clear all Rate-Limiter statistics

layer-3

Layer-3 control and Routed packets

l3-opts

multicast

Multicast data packets

mcast-opts

layer-2

Layer-2 control and Bridged packets

l2-opts

opts

f1

Control packets from F1 modules to supervisor

f1-opts

span-egress

SPAN/ERSPAN egress packets

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec

clear hsrp counters clear hsrp state-history

clear hsrp counters [ <value> ] | clear hsrp state-history [ interface <interface-id> ] [ group <group-id> ]

Syntax Description

clear

Reset functions

hsrp

HSRP commands

counters

Internal counters

value

(Optional) Counter to be cleared

state-history

Clear Groups' state history

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

group

(Optional) Group number

group-id

(Optional) Group Number

Command Mode

- /exec

clear icmpv6 cache

clear icmpv6 cache { { interface [ <intf> ] } }

Syntax Description

clear

Reset functions

icmpv6

ICMPv6 Commands

cache

Clear icmpv6 cache

interface

Clear icmpv6 interface information

intf

(Optional) Interface name to clear

Command Mode

- /exec

clear install all failed-standby

clear install all failed-standby

Syntax Description

clear

Reset functions

install

Clear the installer log

all

Clear the install all log

failed-standby

Clear the failed-standby log

Command Mode

- /exec

clear install failure-reason

clear install failure-reason

Syntax Description

clear

Reset functions

install

Clear the installer log

failure-reason

Clear the install failure-reason log

Command Mode

- /exec

clear install log-history all

clear install log-history { all | oldest <i0> }

Syntax Description

clear

Reset functions

install

Install related show commands

log-history

Patch installer historical logs

all

Delete complete history log

oldest

oldest Delete the oldest <n> install log-history points

i0

Number of log-history points to delete

Command Mode

- /exec

clear install status

clear install status

Syntax Description

clear

Reset functions

install

Clear the installer log

status

Clear the installer status log

Command Mode

- /exec

clear ip

clear ip { netstack mroute | mroute data-created } { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

netstack

Netstack's local cache

mroute

Clear multicast routing table

data-created

Clear all Data-created PIM ASM (S,G) routes

all

Clear all routes

group-prefix

Clear all routes within the Group prefix

group

Clear all sources matching the Group

source

(Optional) Clear a (S,G) route

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip adjacency cache

clear ip adjacency cache { { interface [ <intf> ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

adjacency

Configure Adjmgr

cache

Clear adjacency cache

interface

Clear adjacency interface information

intf

(Optional) Interface name to clear

Command Mode

- /exec

clear ip adjacency no-ufdm

clear ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <ip-addr> | * } no-ufdm

Syntax Description

clear

Reset functions

ip

Clear IP commands

adjacency

Clear Adjacency

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip-addr

IPV4 source address

*

Delete all adjacency in this context

no-ufdm

Create inconsistancy in adjacency

Command Mode

- /exec

clear ip adjacency statistics

clear ip adjacency statistics

Syntax Description

clear

Reset functions

ip

Clear IP commands

adjacency

Clear Adjacency

statistics

Clear Adjacency Statistics

Command Mode

- /exec

clear ip amt tunnel

clear ip amt tunnel [ <address4> <port> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

AMT clear commands

amt

AMT show commands

ip

Display IP information

tunnel

Display tunnel information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

address4

(Optional) IP address of tunnel endpoint

port

(Optional) UDP port number of gateway

Command Mode

- /exec

clear ip arp

clear ip arp [ <interface> | <ip-address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ force-delete ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

Clear ARP table and statistics

interface

(Optional) ARP interface

ip-address

(Optional) IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Clear ARP entries for all vrfs

force-delete

(Optional) Clear the entries from ARP table without refresh

Command Mode

- /exec

clear ip arp cache

clear ip arp cache { { interface [ <intf> ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

arp

cache

Clear arp cache

interface

Clear arp interface information

intf

(Optional) Interface name to clear

Command Mode

- /exec

clear ip arp controller-statistics

clear ip arp controller-statistics

Syntax Description

clear

Reset functions

ip

Display IP information

arp

Display ARP table and statistics

controller-statistics

Controller statistics

Command Mode

- /exec

clear ip arp event-history

clear ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli | suppression-event | suppression-errors | controller-errors | dme-event | all } [ dump-to-file ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

ARP events

event-history

Clear the event history buffers

packet

inst packet logs

event

Internal event logs

sync-event

CFS and MCECM related event logs

ip-sync-event

L3 over vpc related event logs

control

ARP control event logs

ha

HA and GR logs

errors

inst error logs

lcache

lcache logs

lcache-errors

lcache_error logs

client-event

Client_event logs

client-errors

Client_error logs

cli

clear cli logs

snmp

SNMP logs

suppression-event

ARP suppression event logs

suppression-errors

ARP suppression error logs

controller-errors

Controller MAC-IP route error logs

dme-event

ARP DME event logs

all

All event history buffers

dump-to-file

(Optional) Dump the Arp event history logs into the file

Command Mode

- /exec

clear ip arp inspection log

clear ip arp inspection log

Syntax Description

clear

Reset functions

ip

Clear ip counters

arp

Clear State of ARP features

inspection

Clear State of ARP Inspection

log

Log Buffer

Command Mode

- /exec

clear ip arp inspection statistics vlan

clear ip arp inspection statistics vlan <vlan-id>

Syntax Description

clear

Reset functions

ip

Clear ip counters

arp

Clear State of ARP features

inspection

Clear State of ARP Inspection

statistics

Statistics

vlan

Vlan range

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec

clear ip arp multihoming-statistics

clear ip arp multihoming-statistics [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

Clear ARP table and statistics

interface

(Optional) ARP interface

multihoming-statistics

Display ARP Multihoming stats

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Clear ARP Multihoming statistics for all vrfs

Command Mode

- /exec

clear ip arp static-arps-outside-subnet-count

clear ip arp static-arps-outside-subnet-count

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

Display ARP table and statistics

static-arps-outside-subnet-count

Clear static ARPs outside subnet count

Command Mode

- /exec

clear ip arp statistics

clear ip arp statistics [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

Clear ARP table and statistics

interface

(Optional) ARP interface

statistics

Clear ARP statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Clear ARP statistics for all vrfs

Command Mode

- /exec

clear ip arp suppression-cache statistics

clear ip arp suppression-cache statistics

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

Clear ARP table and statistics

suppression-cache

ARP-suppression cache

statistics

clear suppression statistics

Command Mode

- /exec

clear ip arp tunnel-statistics

clear ip arp tunnel-statistics

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

Display ARP table and statistics

tunnel-statistics

Clear ARP statistics for tunneled packets

Command Mode

- /exec

clear ip arp vpc-statistics

clear ip arp vpc-statistics

Syntax Description

clear

Reset functions

ip

Clear IP commands

arp

Display ARP table and statistics

vpc-statistics

Clear ARP vPC statistics

Command Mode

- /exec

clear ip cache

clear ip cache { { interface [ <intf> ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

cache

Clear ip cache

interface

Clear ip interface information

intf

(Optional) Interface name to clear

Command Mode

- /exec

clear ip dhcp global statistics

clear ip dhcp global statistics

Syntax Description

clear

Reset functions

ip

Clear ip counters

dhcp

Clear State of DHCP features

global

Clear State of DHCP global stats

statistics

DHCP snooping statistics

Command Mode

- /exec

clear ip dhcp relay statistics

clear ip dhcp relay statistics [ interface <intf> | { interface <intf> serverip <ip-addr-val> [ use-vrf <vrf-name> ] } ]

Syntax Description

clear

Reset functions

ip

Clear ip counters

dhcp

Clear State of DHCP features

relay

Clear State of DHCP relay stats

statistics

DHCP Relay statistics

interface

(Optional) input interface

intf

(Optional) interface

serverip

(Optional) Helper address

ip-addr-val

(Optional) IP address

use-vrf

(Optional) helper address VRF membership

vrf-name

(Optional) VRF name

Command Mode

- /exec

clear ip dhcp snooping binding

clear ip dhcp snooping binding [ { vlan <vlan-id> mac <mac-addr> ip <ip-addr> interface <interface-id> } |

Syntax Description

clear

Reset functions

ip

Clear ip counters

dhcp

Clear State of DHCP features

snooping

Clear State of DHCP Snooping

binding

DHCP snooping bindings

vlan

(Optional) VLAN

vlan-id

(Optional) VLAN id

mac

(Optional) MAC address

mac-addr

(Optional) MAC address

ip

(Optional) IP address

ip-addr

(Optional) IP address

interface

(Optional) interface

interface-id

(Optional) interface

Command Mode

- /exec

clear ip dhcp snooping statistics

clear ip dhcp snooping statistics [ { vlan <vlan-id> interface <intf> } |

Syntax Description

clear

Reset functions

ip

Clear ip counters

dhcp

Clear State of DHCP features

snooping

Clear State of DHCP snooping stats

statistics

DHCP snooping statistics

vlan

(Optional) VLAN

vlan-id

(Optional) VLAN id

interface

(Optional) input interface

intf

(Optional) interface

Command Mode

- /exec

clear ip dns all config

clear ip dns all config

Syntax Description

clear

Clear entries

ip

Configure ip feature

dns

DNS related config

all

All DNS related content

config

Domain-name, name-server, domain-list, sortlist, options, results

Command Mode

- /exec

clear ip dns use-vrf config

clear ip dns use-vrf config

Syntax Description

clear

Clear entries

ip

Configure ip feature

dns

DNS related config

use-vrf

Config with keyword use-vrf

config

Domain-name, name-server, domain-list

Command Mode

- /exec

clear ip eigrp accounting

clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] accounting [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

accounting

Clear IP-EIGRP accounting statistics

Command Mode

- /exec

clear ip eigrp event-history

clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] event-history [ fsm | packet | rib | all ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Clear the event history buffers

fsm

(Optional) FSM log of EIGRP

packet

(Optional) Packet log of EIGRP

rib

(Optional) RIB log of EIGRP

all

(Optional) All event history buffers

Command Mode

- /exec

clear ip eigrp event-history bfd

clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] event-history bfd

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Clear the event history buffers

bfd

Show bfd log of EIGRP

Command Mode

- /exec

clear ip eigrp events

clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] events [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

events

Clear IP-EIGRP event logs

Command Mode

- /exec

clear ip eigrp logging

clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] logging [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

logging

Stop IP-EIGRP event logging

Command Mode

- /exec

clear ip eigrp redistribution

clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribution

Clear EIGRP redistributed information

Command Mode

- /exec

clear ip eigrp route-map statistics redistribute

clear ip eigrp [ <eigrp-ptag> ] route-map statistics redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

route-map

Route-map related information

statistics

Route-map statistics

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT Anycast prefix

lisp

LISP EID-prefixes

Command Mode

- /exec

clear ip eigrp traffic

clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] traffic [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

traffic

Clear IP-EIGRP traffic statistics

Command Mode

- /exec

clear ip ftm statistics

clear ip ftm statistics

Syntax Description

clear

Reset functions

ip

Clear IP commands

ftm

FTM API

statistics

Statistics

Command Mode

- /exec

clear ip igmp event-history

clear ip igmp event-history [ <igmp-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP related information

event-history

Clear event-history buffers

igmp-event-hist-buf-name

(Optional) Event hist buffer name

Command Mode

- /exec

clear ip igmp groups

clear ip igmp { groups | route } { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP related information

groups

Route information

route

Route information

all

Clear all routes

group-prefix

Clear all routes within the Group prefix

group

Clear all routes matching the Group

source

(Optional) Clear a (S,G) route

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip igmp interface statistics

clear ip igmp interface statistics [ <interface> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP statistics information

interface

Interface related information

statistics

Packet/internal counter statistics

interface

(Optional) Specific interface only

Command Mode

- /exec

clear ip igmp snooping event-history

clear ip igmp snooping event-history [ <igmp-snoop-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP Snooping

snooping

Clear IGMP Snooping

event-history

Clear event history buffers

igmp-snoop-event-hist-buf-name

(Optional) Event history buffer name

Command Mode

- /exec

clear ip igmp snooping explicit-tracking

clear ip igmp snooping explicit-tracking { vlan { <vlan> | all } | bridge-domain { <bdid> | all } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP Snooping

snooping

Clear IGMP Snooping

explicit-tracking

Clear Explicit Host tracking information

vlan

Clear explicit tracking information for VLAN

vlan

Specify VLAN

bridge-domain

Clear explicit tracking information for BD

bdid

Specify BD

all

Clear for all vlans/BD

Command Mode

- /exec

clear ip igmp snooping groups

clear ip igmp snooping groups { <all> | { <group-prefix> | <group> } [ <source> ] } [ interface <if-name> ] { vlan { <vlan> | all } | bridge-domain { <bdid> | all } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP Snooping

snooping

Clear IGMP Snooping

groups

Clear snooped groups

all

Clear all groups

group-prefix

Group prefix to clear

group

Group address to clear

source

(Optional) Source address to clear

interface

(Optional) Specify interface to clear group state

if-name

(Optional) Interface name to clear

vlan

Clear information for VLAN

vlan

Specify the VLAN number

bridge-domain

Clear information for BD

bdid

Specify the BD number

all

Clear for all VLAN/BDs

Command Mode

- /exec

clear ip igmp snooping proxy querier ports vlan

clear ip igmp snooping proxy querier ports { vlan <vlan> | bridge-domain <bdid> } <if-name> [ purge ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP Snooping

snooping

Clear IGMP Snooping

proxy

Clear IGMP snooping proxy

querier

Clear IGMP snooping proxy querier

ports

Clear IGMP snooping proxy querier ports

vlan

Clear for a specific vlan

vlan

Specify the VLAN number

bridge-domain

Clear for a specific BD

bdid

Specify the BD number

if-name

Interface name to clear

purge

(Optional) Remove port from priority list

Command Mode

- /exec

clear ip igmp snooping report statistics

clear ip igmp snooping { report-policy | access-group } statistics [ vlan <vlan> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP Snooping

snooping

Clear IGMP Snooping

report-policy

IGMP Report Policy

access-group

IGMP access-group

statistics

Policy statistics

vlan

(Optional) Clear VLAN IGMP snooping policy statistics information

vlan

(Optional) Specify VLAN

Command Mode

- /exec

clear ip igmp snooping statistics

clear ip igmp snooping statistics { vlan <vlan> | bridge-domain <bdid> | all }

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP Snooping

snooping

Clear IGMP Snooping

statistics

Packet/internal counter statistics

vlan

Clear VLAN statistics

vlan

Specify VLAN

bridge-domain

Clear BD statistics

bdid

Specify BD

all

All VLAN/BDs

Command Mode

- /exec

clear ip igmp snooping vpc peer-link-exclude

clear ip igmp snooping vpc peer-link-exclude { vlan <vlan> | bridge-domain <bdid> | all } [ group <group-addr> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

igmp

Clear IGMP Snooping

snooping

Clear IGMP Snooping

vpc

Clear vPC information

peer-link-exclude

Clear vPC peer-link Exclude state

vlan

Clear vpc peer-link Exclude state for VLAN

vlan

Specify VLAN

bridge-domain

Clear vpc peer-link Exclude state for BD

bdid

Specify BD

all

All VLAN/BDs

group

(Optional) Clear vpc peer-link Exclude state for VLAN/BD

group-addr

(Optional) Specify Group address

Command Mode

- /exec

clear ip interface statistics

clear ip interface statistics [ <interface> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

interface

Clear IP related interface information

statistics

Clear IP interface statistics

interface

(Optional) Clear IP statistics for interface

Command Mode

- /exec

clear ip lisp data-cache

clear ip lisp data-cache [ <eid> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

lisp

LISP clear commands

data-cache

Clear EID-to-RLOC data cache mapping in this ITR

eid

(Optional) Clear mapping for IP destination EID

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ip lisp map-cache

{ { clear ip lisp map-cache [ <eid-prefix> ] [ vrf { <vrf-name> | <vrf-known-name> } ] } | { clear ipv6 lisp map-cache [ <eid-prefix6> ] [ vrf { <vrf-name> | <vrf-known-name> } ] } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

ipv6

Clear IPv6 commands

lisp

LISP clear commands

map-cache

Clear an EID-to-RLOC cache mapping in this ITR

vrf

(Optional) Clear entry for particular vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

eid-prefix

(Optional) Clear entry associated with IP EID-prefix

Command Mode

- /exec

clear ip lisp statistics

clear ip lisp statistics [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

lisp

LISP clear commands

statistics

Clear global LISP statistics

vrf

(Optional) Clear statistics for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ip mbgp dampening

{ { clear ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] ipv4 { unicast | multicast } dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all dampening } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | vpnv4 unicast } dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv6 { unicast | multicast } | vpnv6 unicast } dampening [ <ipv6-prefix> ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all dampening } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

bgp

Clear BGP sessions

mbgp

Clear MBGP sessions

dampening

Clear route flap dampening information

ip-prefix

(Optional) Clear route flap dampening for prefix

ip-addr

(Optional) Clear route flap dampening for one network

ip-mask

(Optional) Network mask

ipv4

Clear IPv4 address-family

ipv6

Clear IPv6 address-family

vpnv4

Clear VPNv4 address-family

vpnv6

Clear VPNv6 address-family

unicast

Clear unicast address-family

multicast

Clear multicast address-family

all

Clear all address-families

Command Mode

- /exec

clear ip mbgp flap-statistics

{ { clear ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] ipv4 { unicast | multicast } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all flap-statistics } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | vpnv4 unicast } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] | regexp <regexp-str> ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv6 { unicast | multicast } | vpnv6 unicast } flap-statistics [ <ipv6-prefix> | regexp <regexp-str> ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all flap-statistics } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

clear

Reset functions

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip

Clear IP commands

bgp

Clear BGP sessions

mbgp

Clear MBGP sessions

flap-statistics

Clear flap statistics

ip-prefix

(Optional) Clear flap statistics for one prefix

ip-addr

(Optional) Clear flap statistics for one network

ip-mask

(Optional) Network mask

ipv4

Clear IPv4 address-family

ipv6

Clear IPv6 address-family

vpnv4

Clear VPNv4 address-family

vpnv6

Clear VPNv6 address-family

unicast

Clear unicast address-family

multicast

Clear multicast address-family

all

Clear all address-families

regexp

(Optional) Clear flap statistics for routes matching the regular expression

regexp-str

(Optional) Regular expression to match the AS paths

Command Mode

- /exec

clear ip mbgp peer-template

{ { clear ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { <neighbor-id> | * | <asn> | <prefix-id> peer-template <peer-template-name> } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { <neighbor-id> | * | <asn> | <prefix-id> | peer-template <peer-template-name> } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify | { ipv4 { unicast | multicast } | { vpnv4 | vpnv6 } unicast | all } { soft [ in | out ] | dampened-paths | flap-statistics | no-notify } ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast | mvpn | labeled-unicast } | ipv6 { unicast | multicast | mvpn | labeled-unicast } | { vpnv4 | vpnv6 } unicast | l2vpn vpls | l2vpn evpn | link-state | all } { <neighbor-id> | <ipv6-neighbor-id> | * | <asn> | peer-template <peer-template-name> | <prefix-id> | <ipv6-prefix-id> } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

bgp

Clear BGP sessions

mbgp

Clear MBGP sessions

neighbor-id

IP address of the neighbor to clear

prefix-id

Clear all neighbors matching the prefix

*

Clear all neighbors (Should be a * character)

asn

Clear all neighbors in an AS

peer-template

Clear all neighbors in a peer-template

peer-template-name

Peer-template name

soft

(Optional) Soft reconfiguration

in

(Optional) Clear soft reconfiguration inbound

out

(Optional) Clear soft reconfiguration outbound

ipv4

(Optional) Clear IPv4 address-family

ipv6

Clear IPv6 address-family

vpnv4

(Optional) Clear VPNv4 address-family

vpnv6

(Optional) Clear VPNv6 address-family

unicast

(Optional) Clear unicast address-family

multicast

(Optional) Clear multicast address-family

link-state

Clear link-state address-family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

labeled-unicast

Display BGP information for labeled-unicast address family

all

(Optional) Clear all address-families

dampened-paths

(Optional) Clear dampened paths for neighbor

flap-statistics

(Optional) Clear flap statistics for neighbor

no-notify

(Optional) Clear without sending notification

Command Mode

- /exec

clear ip mfwd event-history

clear ip mfwd event-history [ <mfwd-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

mfwd

Clear MCASTFWD related information

event-history

Clear event-history buffers

mfwd-event-hist-buf-name

(Optional) Event hist buffer name

Command Mode

- /exec

clear ip mroute

clear ip mroute [ repopulate ] { { <all> [ shared-tree | source-tree ] } | { <group-prefix> [ shared-tree | source-tree ] } | { <group> [ <source> | shared-tree | source-tree ] } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

mroute

Clear multicast routing table

repopulate

(Optional) Clear MRIB states and request other components to repopulate mroutes

all

Clear all routes

group-prefix

Clear all routes within the Group prefix

group

Clear all routes matching the Group

source

(Optional) Clear a (S,G) route

shared-tree

(Optional) Clear the (*,G) route associated with the group

source-tree

(Optional) Clear all (S,G) routes associated with the group

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip mroute statistics

clear ip mroute statistics { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

mroute

Clear multicast routing table

statistics

Clear statistics of multicast route

all

Clear all routes

group-prefix

Clear all routes within the Group prefix

group

Clear all routes matching the Group

source

(Optional) Clear a (S,G) route

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip msdp event-history

clear ip msdp event-history [ <msdp-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

msdp

MSDP global configuration commands

event-history

Clear the event-history buffer instances

msdp-event-hist-buf-name

(Optional) Specify the particular instance of the event-history buffer

Command Mode

- /exec

clear ip msdp peer

clear ip msdp peer <peer-address> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

msdp

MSDP clear commands

peer

Clear MSDP peer connection

peer-address

IP address of MSDP peer

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ip msdp policy statistics sa-policy in

clear ip msdp policy statistics sa-policy <peer-address> { in | out } [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

msdp

MSDP global configuration commands

policy

Policy information

statistics

Policy statistics

sa-policy

Configureed SA policy for MSDP peer

peer-address

IP address of MSDP peer for SA policy

in

Input policy

out

Output policy

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ip msdp sa

clear ip msdp { sa-cache | route } { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

msdp

MSDP clear commands

sa-cache

Clear contents of SA cache

route

Clear contents of SA cache

all

Clear all routes

group-prefix

Clear all routes within the Group prefix

group

Clear all routes matching the Group

source

(Optional) Clear a (S,G) route

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip msdp statistics

clear ip msdp statistics [ <peer-address> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

msdp

MSDP clear commands

statistics

Clear statistics for peers

peer-address

(Optional) IP address of MSDP peer

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ip nat translation

clear ip nat translation { all | inside <insideGlobalIP> <insideLocalIP> [ outside <outsideLocalIP> <outsideGlobalIP> ] | outside <outsideLocalIP> <outsideGlobalIP> }

Syntax Description

clear

Reset functions

ip

Clear ip counters

nat

Clear NAT

translation

Clear dynamic translation

all

Delete all dynamic translations

inside

Inside addresses

insideGlobalIP

Inside global IP address

insideLocalIP

Inside local IP address

outside

(Optional) Outside addresses

outsideLocalIP

(Optional) Outside local IP address

outsideGlobalIP

(Optional) Outside global IP address

Command Mode

- /exec

clear ip ospf database

clear ip ospf [ <tag> ] database

Syntax Description

clear

Reset functions

ip

Clear IP commands

ospf

Clear OSPF tables

tag

(Optional) Process tag

database

Clear the LSDB and all neighbors

Command Mode

- /exec

clear ip ospf event-history

clear ip ospf [ <tag> ] event-history [ adjacency | event | ha | flooding | lsa | spf | redistribution | cli | ldp | te | rib | hello | spf-trigger | objstore | all ]

Syntax Description

clear

Reset functions

ip

IP events

ospf

Debug OSPF events

tag

(Optional) Process tag

event-history

Clear the event history buffers

adjacency

(Optional) Adjacency formation logs

event

(Optional) Internal event logs

ha

(Optional) HA and GR logs

flooding

(Optional) LSA flooding logs

lsa

(Optional) LSA generation and database logs

spf

(Optional) SPF calculation logs

redistribution

(Optional) Redistribution logs

cli

(Optional) Cli logs

ldp

(Optional) LDP related logs

te

(Optional) MPLS TE related logs

rib

(Optional) RIB related logs

hello

(Optional) HELLO related logs

spf-trigger

(Optional) SPF TRIGGER related logs

objstore

(Optional) DME OBJSTORE related logs

all

(Optional) All event history buffers

Command Mode

- /exec

clear ip ospf event-history detail

clear ip ospf [ <tag> ] event-history detail

Syntax Description

clear

Reset functions

ip

IP events

ospf

Debug OSPF events

tag

(Optional) Process tag

event-history

Clear the event history buffer

detail

Detailed event history buffer

Command Mode

- /exec

clear ip ospf interface

clear ip ospf [ <tag> ] interface { * | <interface> }

Syntax Description

clear

Reset functions

ip

Clear IP commands

ospf

Clear OSPF tables

tag

(Optional) Process tag

interface

Clear one or more interfaces

*

Clear all interfaces

interface

Interface to clear

Command Mode

- /exec

clear ip ospf neighbor

clear ip ospf [ <tag> ] neighbor { { { * | <neighborid> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { <interface> } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

ospf

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbor

Clear one or more neighbors

*

Clear all neighbors

neighborid

Source IP address, or router ID of the neighbor

interface

Interface to clear all neighbors on

Command Mode

- /exec

clear ip ospf policy statistics

clear ip ospf [ <tag> ] policy statistics { { redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ospf

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

policy

Clear Policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

isis

ISO Intermediate-to-Intermediate (IS-IS)

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

ospf

Open Shortest Path First (OSPFv2)

eigrp

Enhanced Interior Gateway Protocol (EIGRP)

rip

Routing Information Protocol (RIP)

static

Static

direct

Directly connected

amt

AMT anycast prefix

lisp

LISP EID-prefixes

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

in

Filter networks sent to this area

out

Filter networks sent from this area

tag

Command Mode

- /exec

clear ip ospf redistribution

clear ip ospf [ <tag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ospf

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribution

Clear OSPF route redistribution

Command Mode

- /exec

clear ip ospf statistics

clear ip ospf [ <tag> ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ospf

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Clear event counters

Command Mode

- /exec

clear ip ospf traffic

clear ip ospf [ <tag> ] traffic [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

ospf

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Clear packet counters

interface

(Optional) Interface to clear all traffic on

Command Mode

- /exec

clear ip pim event-history

clear ip pim event-history [ <pim-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

pim

PIM clear commands

event-history

Clear event history buffers

pim-event-hist-buf-name

(Optional) Event history buffer instance

Command Mode

- /exec

clear ip pim interface statistics

clear ip pim interface statistics [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

pim

Clear PIM information

interface

Interface related information

statistics

Packet interface counter statistics

interface

(Optional) Interface name to clear

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip pim policy statistics

clear ip pim policy statistics { register-policy | bsr { bsr-policy | rp-candidate-policy } | auto-rp { rp-candidate-policy | mapping-agent-policy } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

pim

PIM global configuration commands

policy

Policy related information

statistics

Policy statistics

register-policy

Show statistics for register-policy

bsr

Bootstrap protocol RP-distribution policy

bsr-policy

Statistics for BSR messages

rp-candidate-policy

Statistics for RP candidate messages

auto-rp

Statistics for auto-rp messages

rp-candidate-policy

Statistics for RP candidate messages

mapping-agent-policy

Statistics for mapping agent messages

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip pim policy statistics jp

clear ip pim policy statistics { jp-policy | neighbor-policy } <interface>

Syntax Description

clear

Reset functions

ip

Clear IP commands

pim

PIM global configuration commands

policy

Policy related information

statistics

Policy statistics

jp-policy

Statistics for jp-policy

neighbor-policy

Statistics for neighbor-policy

interface

Interface

Command Mode

- /exec

clear ip pim route

clear ip pim route { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

pim

PIM clear commands

route

Route information

all

Clear all routes

group-prefix

Clear all routes within the Group prefix

group

Clear all routes matching the Group

source

(Optional) Clear a (S,G) route

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip pim statistics

clear ip pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

pim

Clear PIM information

statistics

Packet global counter statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip rip policy statistics redistribute bgp

{ { clear ip rip policy statistics redistribute bgp <as> } | { clear ip rip policy statistics redistribute eigrp <tag> } | { clear ip rip policy statistics redistribute isis <tag> } | { clear ip rip policy statistics redistribute rip <tag> } | { clear ip rip policy statistics redistribute ospf <tag> } | { clear ip rip policy statistics redistribute direct } | { clear ip rip policy statistics redistribute static } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

rip

Routing Information Protocol (RIP)

policy

Policy related information

statistics

Policy statistics

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

as

Autonomous system number

isis

Intermediate-to-intermediate (ISIS)

ospf

Open Shortest Path First (OSPFv2)

tag

Process tag

static

Static routes

direct

Directly connected routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip rip statistics

clear { ipv6 | ip } rip statistics [ * | <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

ip

Clear IP commands

rip

Routing Information Protocol (RIP)

statistics

Clear RIP statistics

*

(Optional) RIP statistics for all interfaces

interface

(Optional) RIP interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ip routing multicast event-history

clear ip routing multicast event-history [ <mrib-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

routing

Clear event-history buffers

multicast

Clear all multicast event-history buffers

event-history

Clear event history buffers

mrib-event-hist-buf-name

(Optional) Event history buffer

Command Mode

- /exec

clear ip stats

clear ip stats

Syntax Description

clear

Reset functions

ip

Clear IP commands

stats

Clear IP internal stats

Command Mode

- /exec

clear ip traffic

clear ip traffic [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ip

Clear IP commands

traffic

Clear IP global statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ip vip

clear ip vip { uuid <uuid> | <vip-addr> vrf { <vrf-name> | <vrf-known-name> } }

Syntax Description

clear

Reset functions

ip

Clear IP commands

vip

Clear virtual ip address

uuid

UUID of client

uuid

UUID of client whose vips needs to be cleared

vip-addr

VIP in format A.B.C.D

vrf

Display per-VRF information

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec

clear ipv6 adjacency no-ufdm

clear ipv6 adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <ipv6-addr> | * } no-ufdm

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

adjacency

Clear Adjacency

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

*

Delete all adjacency in this context

no-ufdm

Create inconsistancy in adjacency

Command Mode

- /exec

clear ipv6 adjacency statistics

clear ipv6 adjacency statistics

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

adjacency

Clear Adjacency

statistics

Clear Adjacency Statistics

Command Mode

- /exec

clear ipv6 amt tunnel

clear ipv6 amt tunnel [ <address6> <port> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

AMT clear commands

amt

AMT show commands

ipv6

Display IP information

tunnel

Display tunnel information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

port

(Optional) UDP port number of gateway

Command Mode

- /exec

clear ipv6 cache

clear ipv6 cache { { interface [ <intf> ] } }

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

cache

Clear ipv6 cache

interface

Clear ipv6 interface information

intf

(Optional) Interface name to clear

Command Mode

- /exec

clear ipv6 dhcp relay statistics

clear ipv6 dhcp relay statistics [ interface <intf> [ [ server-ip <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <dest-interface> ] ] | [ server-ip <ip-addr-val> [ interface <dest-interface> ] [ use-vrf <vrf-name> ] ] ] ]

Syntax Description

clear

Reset functions

ipv6

IPv6

dhcp

Clear State of DHCPv6 features

relay

Clear State of DHCPv6 relay stats

statistics

DHCPv6 Relay statistics

interface

(Optional) input interface

intf

(Optional) interface

server-ip

(Optional) Server address

use-vrf

(Optional) Server address VRF membership

vrf-name

(Optional) VRF name

interface

(Optional) Destination interface for the server address

dest-interface

(Optional) Destination interface

Command Mode

- /exec

clear ipv6 eigrp route-map statistics redistribute

clear ipv6 eigrp [ <eigrp-ptag> ] route-map statistics redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt | lisp } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

route-map

Route-map related information

statistics

Route-map statistics

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospfv3

Open Shortest Path First (OSPF) V3

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT Anycast prefix

lisp

LISP EID-prefixes

Command Mode

- /exec

clear ipv6 icmp

clear ipv6 { icmp | nd } { interface statistics [ <interface> ] | global statistics }

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

icmp

Clear ICMPv6 information

nd

Clear Neighbor Discovery interface information

interface

Clear ICMPv6 related interface information

statistics

Clear ICMPv6 interface statistics

global

Clear ICMPv6 global statistics

interface

(Optional) Interface to clear statistics for

Command Mode

- /exec

clear ipv6 icmp vpc-statistics

clear ipv6 icmp vpc-statistics

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

icmp

Clear ICMPv6 information

vpc-statistics

Clear ICMPv6 ND vPC statistics

Command Mode

- /exec

clear ipv6 interface statistics

clear ipv6 interface statistics [ <interface> ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

interface

Clear IPv6 related interface information

statistics

Clear IPv6 interface statistics

interface

(Optional) Interface to clear statistics for

Command Mode

- /exec

clear ipv6 lisp data-cache

clear ipv6 lisp data-cache [ <eid6> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

lisp

LISP clear commands

data-cache

Clear EID-to-RLOC data cache mapping in this ITR

eid6

(Optional) Clear mapping for IPv6 destination EID

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ipv6 lisp statistics

clear ipv6 lisp statistics [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

lisp

LISP clear commands

statistics

Clear global LISP statistics

vrf

(Optional) Clear statistics for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ipv6 mld groups

clear ipv6 [ icmp ] mld { groups | route } { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

icmp

(Optional) Clear ICMPv6 information

mld

Clear Multicast Listener Discovery information

groups

Route information

route

Route information

all

Clear all routes

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ipv6 mroute

clear ipv6 mroute { { <all> [ shared-tree | source-tree ] } | { <group-prefix> [ shared-tree | source-tree ] } | { <group> [ <source> | shared-tree | source-tree ] } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

mroute

Clear multicast routing table

all

Clear all routes

shared-tree

(Optional) Clear the (*,G) route associated with the group

source-tree

(Optional) Clear all (S,G) routes associated with the group

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ipv6 mtu

clear ipv6 mtu [ <ipv6-addr> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

mtu

Display IPV6 Path MTU Cache

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear ipv6 neighbor

clear ipv6 neighbor [ [ <nbr-addr> [ <intf> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] | vrf { <vrf-name> | <vrf-known-name> | all } | <interface> ] [ force-delete ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

neighbor

Clear ICMPv6 neighbor cache

intf

(Optional) Clear cache entries for given interface

interface

(Optional) Clear cache entries for given interface

force-delete

(Optional) Clear the cache entries without refresh

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ipv6 netstack mroute

clear ipv6 netstack mroute { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

netstack

Netstack's local cache

mroute

Multicast route information

all

Clear all routes

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ipv6 pim event-history

clear ipv6 pim event-history [ <pim6-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

pim

Clear PIM event history buffers

event-history

Clear event-history buffers

pim6-event-hist-buf-name

(Optional) Event-history buffer instance

Command Mode

- /exec

clear ipv6 pim interface statistics

clear ipv6 pim interface statistics [ <interface> ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

pim

Clear PIM6 information

interface

Interface related information

statistics

Packet interface counter statistics

interface

(Optional) Interface name to clear

Command Mode

- /exec

clear ipv6 pim policy statistics jp

clear ipv6 pim policy statistics { jp-policy | neighbor-policy } <interface>

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

pim

Clear PIM information

policy

Policy related information

statistics

Policy statistics

jp-policy

Statistics for jp-policy

neighbor-policy

Statistics for neighbor-policy

interface

Interface

Command Mode

- /exec

clear ipv6 pim route

clear ipv6 pim route { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

pim

PIM6 clear commands

route

Route information

all

Clear all routes

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ipv6 pim statistics

clear ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

pim

Clear PIM6 information

statistics

Packet global counter statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ipv6 raguard statistics

clear ipv6 raguard statistics

Syntax Description

clear

Reset functions

ipv6

IPv6

raguard

IPV6 raguard

statistics

RA packet drop count

Command Mode

- /exec

clear ipv6 rip policy statistics redistribute bgp

{ { clear ipv6 rip policy statistics redistribute bgp <as> } | { clear ipv6 rip policy statistics redistribute eigrp <tag> } | { clear ipv6 rip policy statistics redistribute isis <tag> } | { clear ipv6 rip policy statistics redistribute rip <tag> } | { clear ipv6 rip policy statistics redistribute ospfv3 <tag> } | { clear ipv6 rip policy statistics redistribute direct } | { clear ipv6 rip policy statistics redistribute static } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

rip

Routing Information Protocol (RIP)

policy

Policy related information

statistics

Policy statistics

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

isis

Intermediate-to-intermediate (ISIS)

ospfv3

Open Shortest Path First (OSPFv3)

tag

Process tag

static

Static routes

direct

Directly connected routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear ipv6 routing multicast event-history

clear ipv6 routing multicast event-history [ <m6rib-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

routing

Clear event-history buffers

multicast

Clear all multicast event-history buffers

event-history

Clear event-history buffers

m6rib-event-hist-buf-name

(Optional) Event-history buffer name

Command Mode

- /exec

clear ipv6 statistics

clear ipv6 statistics

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

statistics

Clear IPv6 global statistics

Command Mode

- /exec

clear ipv6 traffic

clear ipv6 traffic [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

ipv6

Clear IPv6 commands

traffic

Clear IPv6 traffic statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear isis adjacency

clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] adjacency { * | { <interface> | system-id <sid> } + } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

adjacency

Clear IS-IS adjacency state

*

IS-IS adjacencies on all interfaces

interface

IS-IS interface

system-id

Hostname or System ID

sid

Hostname or System ID (in the form of XXXX.XXXX.XXXX)

Command Mode

- /exec

clear isis dpi

clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] dpi [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

dpi

Clear IS-IS DPI logs

Command Mode

- /exec

clear isis event-history

clear isis [ <isis-tag> ] event-history [ <isis-event-hist-buf-name> ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

event-history

Clear event history buffers

isis-event-hist-buf-name

(Optional) Clear the specific event history buffer

Command Mode

- /exec

clear isis ipv6 route-map statistics

clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 route-map statistics { { redistribute { bgp <as> | { <src-isis> | eigrp | ospfv3 | rip } <tag> } } | { redistribute { static | direct | amt } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv6

Clear IS-IS IPv6 information

statistics

Clear IS-IS route-map statistics

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

eigrp

Enhanced Interior Gateway Protocol

as

Autonomous system number

src-isis

IS-IS Routing for IPv6

ospfv3

Open Shortest Path First (OSPF) V3

rip

RIP for IPv6 (RIPNG)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

route-map

Route-map to constrain redistribution

distribute

Distribute routes between ISIS levels

into

from level-n into level-m

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

Command Mode

- /exec

clear isis redistribution

clear isis [ <isis-tag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribution

Clear IS-IS redistributed information

Command Mode

- /exec

clear isis route-map statistics

clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] route-map statistics { { redistribute { bgp <as> | { <src-isis> | eigrp | ospf | rip } <tag> } } | { redistribute { static | direct | amt } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip

(Optional) Clear IS-IS IPv4 information

route-map

Clear IS-IS route-map information

statistics

Clear IS-IS route-map statistics

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

eigrp

Enhanced Interior Gateway Protocol

as

Autonomous system number

src-isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

rip

RIP for IPv4

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

distribute

Distribute routes between ISIS levels

into

from level-n into level-m

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

Command Mode

- /exec

clear isis spf-log

clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] spf-log [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

spf-log

Display IS-IS SPF information

Command Mode

- /exec

clear isis statistics

clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics { * | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Clear IS-IS protocol statistics

*

All IS-IS protocol statistics

interface

IS-IS interface

Command Mode

- /exec

clear isis traffic

clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic { * | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

isis

Clear IS-IS information

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Clear IS-IS traffic information

*

All IS-IS traffic information

interface

IS-IS interface

Command Mode

- /exec

clear itd statistics

clear itd statistics <service-name>

Syntax Description

clear

Reset functions

itd

ITD service

statistics

ITD statistics

service-name

ITD service-name

Command Mode

- /exec

clear itd statistics

clear itd statistics <service-name>

Syntax Description

clear

Reset functions

itd

ITD service

statistics

ITD statistics

service-name

ITD service-name

Command Mode

- /exec

clear keystore

clear { keystore | sksd } [ <index> | <name> ]

Syntax Description

clear

Reset functions

keystore

Clear all records in the keystore

sksd

Clear all records in the keystore/sksd-chip

index

(Optional) Clear secret at index <index>

name

(Optional) Clear secret with name <name>

Command Mode

- /exec

clear l2dbg

clear l2dbg { macdb | portdb | rvtepdb }

Syntax Description

clear

Clear

l2dbg

L2 debug databases

macdb

L2 debug MACDB

portdb

L2 debug PORTDB

rvtepdb

L2 debug RVTEPDB

Command Mode

- /exec

clear l2fwder statistics

clear l2fwder statistics

Syntax Description

clear

Reset functions

l2fwder

Clear L2FWDER related information

statistics

Clear the L2FWDER packet counters

Command Mode

- /exec

clear l3vm event-history

clear l3vm event-history { pss | errors | mts | reinit | cli | vrf | topology | all }

Syntax Description

clear

Reset functions

l3vm

Debug L3VM information

event-history

log debug events into event history buffer

pss

L3VM pss operation

errors

L3VM errors

mts

L3VM MTS messages

reinit

L3VM reinit events

cli

Log L3VM CLI related events

vrf

Log VRF related events

topology

Log Topology related events

all

All L3VM debugging

Command Mode

- /exec

clear lacp counters

clear lacp counters [ interface <if0> ]

Syntax Description

clear

Reset functions

lacp

LACP protocol

counters

LACP counters

interface

(Optional) Specify a port-channel

if0

(Optional)

Command Mode

- /exec

clear ldap-server statistics

clear ldap-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } } ]

Syntax Description

clear

Reset functions

ldap-server

Clear LDAP related parameters

statistics

Clear LDAP statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

clear license

clear license { <license-file> [ force ] | sprom | <s0> }

Syntax Description

clear

Reset functions

license

clear license

license-file

License file to be uninstalled

force

(Optional) Force license clear (don't prompt)

sprom

clear license contents in sprom

s0

License file to be uninstalled

Command Mode

- /exec

clear lim counters

clear lim counters [ timeline ]

Syntax Description

clear

Clear lim counters

lim

clear lim counters

counters

clear lim counters

timeline

(Optional) Clear all lim counters

Command Mode

- /exec

clear line

clear line <s0>

Syntax Description

clear

Reset functions

line

Kill a session on particular vty

s0

Enter the vty name

Command Mode

- /exec

clear lisp ddt referral-cache

clear lisp ddt referral-cache [ instance-id <iid> ] [ <eid-prefix> | <eid-prefix6> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

lisp

LISP clear commands

ddt

LISP Delegated Database Tree

referral-cache

Clear the DDT referral cache

vrf

(Optional) Clear entry for particular vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

instance-id

(Optional) Clear entry for specific instance-ID

iid

(Optional) 24-bit instance-ID value

eid-prefix

(Optional) Clear entry associated with IP EID-prefix

Command Mode

- /exec

clear lisp dynamic-eid

clear lisp dynamic-eid { <dyn-eid-name> | <dyn-eid> } [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

lisp

LISP clear commands

dynamic-eid

Clear dynamic-EID state

dyn-eid

IPv4 address of dynamic-EID entry

dyn-eid-name

Clear entries discovered for a dynamic-EID range

vrf

(Optional) Clear dynamic-EID entries for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear lisp proxy-itr

clear lisp proxy-itr [ <addr> | <addr6> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

lisp

LISP clear commands

proxy-itr

Clear discovered PITRs

addr

(Optional) IPv4 locator address of PITR

vrf

(Optional) Clear proxy-itr state for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear lisp site

clear lisp site <site-name> [ instance-id <iid> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

clear

Reset functions

lisp

LISP clear commands

site

Clear site registration data

site-name

Clear registration data for a single site

instance-id

(Optional) Clear registration for a single instance-id within a site

iid

(Optional) 24-bit instance-ID value

vrf

(Optional) Clear site entries for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

clear lldp counters

clear lldp counters

Syntax Description

clear

Reset functions

lldp

Reset the lldp counters

counters

Reset the lldp traffic counters to zero

Command Mode

- /exec

clear lldp counters interface

clear lldp counters interface <if0>

Syntax Description

clear

Reset functions

lldp

Reset the lldp counters

counters

Reset the lldp traffic counters to zero

interface

Clear lldp traffic counters per interface

if0

Enter interface

Command Mode

- /exec

clear logging ip access-list cache

clear logging ip access-list cache

Syntax Description

clear

Reset functions

logging

Clear logging information

ip

IP configuration

access-list

Access-list

cache

logging

Command Mode

- /exec

clear logging logfile

clear logging logfile

Syntax Description

clear

Reset functions

logging

Clear logging information

logfile

Clear logfile messages

Command Mode

- /exec

clear logging nvram

clear logging nvram

Syntax Description

clear

Reset functions

logging

Clear logging information

nvram

Clear nvram logs

Command Mode

- /exec

clear logging onboard

clear logging onboard [ { card-boot-history | card-first-power-on | environmental-history | error-stats | exception-log | interrupt-stats | module <module> [ { environmental-history | error-stats | exception-log | interrupt-stats | obfl-logs | stack-trace | card-boot-history | card-first-power-on } ] | obfl-logs | stack-trace } ]

Syntax Description

clear

Reset functions

logging

Clear logging information

onboard

Clear OBFL information

environmental-history

(Optional) Clear OBFL environmental history

error-stats

(Optional) Clear OBFL error statistics

exception-log

(Optional) Clear OBFL exception log

interrupt-stats

(Optional) Clear OBFL interrupt statistics

card-boot-history

(Optional) Clear Card Boot History

card-first-power-on

(Optional) Clear Card First Power On

module

(Optional) Clear OBFL information for Module

module

(Optional) Enter module number

obfl-logs

(Optional) Clear OBFL (boot-uptime/device-version/obfl-history).

stack-trace

(Optional) Clear OBFL stack trace

Command Mode

- /exec

clear logging onboard

clear logging onboard [ { counter-stats | epld-log | internal { <dc3_options> } | module <module> [ { counter-stats | internal { <dc3_options> } } ] } ]

Syntax Description

clear

Reset functions

logging

Clear logging information

onboard

Clear OBFL information

counter-stats

(Optional) Clear OBFL counter statistics

epld-log

(Optional) Clear EPLD log

internal

(Optional) Clear Logging Onboard Internal

module

(Optional) Clear OBFL information for Module

module

(Optional) Enter module number

counter-stats

(Optional) Clear OBFL counter statistics

dc3_options

(Optional) dc3 options

Command Mode

- /exec

clear logging onboard fex

clear logging onboard fex <ifex> { environmental-history | exception-log | internal { kernel | kernel-big | reset-reason } | obfl-log | stack-trace }

Syntax Description

clear

Reset functions

logging

Clear logging information

onboard

Clear OBFL information

fex

Clear OBFL information for FEX

ifex

Enter FEX ID

environmental-history

Clear OBFL environmental history

exception-log

Clear OBFL exception log

internal

Clear Logging Onboard Internal

reset-reason

Clear OBFL reset reason

kernel

Clear kernel log

kernel-big

Clear kernel log (large records)

obfl-log

Clear OBFL (boot-uptime/device-version/obfl-history)

stack-trace

Clear OBFL kernel stack trace

Command Mode

- /exec

clear logging session

clear logging session

Syntax Description

clear

Reset functions

logging

Clear logging information

session

Clear logging session

Command Mode

- /exec

clear mac address-table datapath

clear mac address-table datapath { dynamic [ vlan <id> ] | static [ vlan <id> ] | { statistics [ interface ] } | isis_intf_stats }

Syntax Description

clear

Clear

mac

MAC configuration commands

address-table

MAC Address Table

datapath

Titanium Datapath Table

dynamic

clear dynamic entries from Titanium PD Forwarding Table

static

USE WITH CAUTION!! clear static entries from Titanium PD Forwarding Table

vlan

(Optional) VLAN

id

(Optional) VLAN ID

statistics

Clear datapath statistics

interface

(Optional) Clear datapath interface statistics

isis_intf_stats

Statistics of ISIS Frames Tx/Rx

Command Mode

- /exec

clear mac address-table dynamic

clear mac address-table dynamic [ local ] [ address <mac-addr> | interface <interface-name> ] [ multicast-entries [ not-notified ] ] [ vlan <vlan-id> | vni <vni-id> | peer-ip <peer-ipv4> ] [ instance <instance> ] [ __readonly__ <info_str> ]

Syntax Description

clear

Clear

mac

MAC configuration commands

address-table

MAC Address Table

dynamic

clear dynamic entries from the Layer2 Forwarding Table

local

(Optional) clear MAC Entries Learned Locally and Not on the Overlay/VXLAN

address

(Optional) address

mac-addr

(Optional) MAC Address

interface

(Optional) Interface

interface-name

(Optional) Interface name

vlan

(Optional) VLAN

vlan-id

(Optional) VLAN ID

vni

(Optional) VXLAN Network Identifier

vni-id

(Optional) VXLAN Network Identifier

peer-ip

(Optional) VXLAN Peer IP Address

peer-ipv4

(Optional) VXLAN Peer IP Address

instance

(Optional) Eureka Instance

instance

(Optional) ASIC Instance Number

multicast-entries

(Optional) clear all dynamically learnt multicast entries

not-notified

(Optional) entries that exceed the hardware notification limit

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

- /exec

clear macsec mka statistics

clear macsec mka statistics [ interface <ifname> ]

Syntax Description

clear

Reset functions

macsec

Clear MACsec parameters

mka

Clear MKA parameters

statistics

Clear MKA statistics

interface

(Optional) Specify interface

ifname

(Optional) Interface list

Command Mode

- /exec

clear mmode database

clear mmode database

Syntax Description

clear

Reset functions

mmode

Clear mmode

database

Clear mmode database

Command Mode

- /exec

clear mpls forwarding statistics

clear mpls forwarding statistics [ interface { <interface> | all } ]

Syntax Description

clear

Reset functions

mpls

MPLS events

forwarding

Clear MPLS software forwarded

statistics

Traffic statistics

interface

(Optional) Interface specific information

interface

(Optional) Interface chosen to clear statistics

all

(Optional) All interfaces

Command Mode

- /exec

clear mpls static trace

clear mpls static trace { error | warning | event }

Syntax Description

clear

Clear MPLS static trace buffer

mpls

MPLS configuration commands

static

MPLS static

trace

MPLS static trace

error

MPLS static error trace

warning

MPLS static warning trace

event

MPLS static event trace

Command Mode

- /exec

clear mpls strip labels

clear mpls strip labels { static | dynamic | all }

Syntax Description

clear

Reset functions

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

labels

labels in database

all

all labels [default]

static

labels learned using cli

dynamic

dynamically learned

Command Mode

- /exec

clear mpls switching label statistics

clear mpls switching label statistics { all | <label-value> }

Syntax Description

clear

Reset functions

mpls

MPLS clear commands

switching

Clear MPLS label switching database information

label

Clear MPLS label information

statistics

Clear label statistics

all

Clear statistics for all labels

label-value

Label

Command Mode

- /exec

clear mpls traffic-eng auto-bw timers

clear mpls traffic-eng auto-bw timers

Syntax Description

auto-bw

Clear auto-bw collection

timers

Clear tunnel counters

clear

Reset functions

mpls

MPLS clear commands

traffic-eng

Clear MPLS Traffic-Engineering statistical information

Command Mode

- /exec

clear mpls traffic-eng link-management counters

clear mpls traffic-eng link-management counters

Syntax Description

link-management

Clear Link-Management statistical information

counters

Clear Link-Management counters

clear

Reset functions

mpls

MPLS clear commands

traffic-eng

Clear MPLS Traffic-Engineering statistical information

Command Mode

- /exec

clear mpls traffic-eng tunnel counters

clear mpls traffic-eng tunnel counters

Syntax Description

tunnel

Clear Tunnel statistics

counters

Clear tunnel counters

clear

Reset functions

mpls

MPLS clear commands

traffic-eng

Clear MPLS Traffic-Engineering statistical information

Command Mode

- /exec

clear mvr counters

clear mvr counters

Syntax Description

clear

Reset functions

mvr

Clear MVR info

counters

Clear MVR counters

Command Mode

- /exec

clear mvr counters receiver-ports

clear mvr counters receiver-ports [ <if0> ]

Syntax Description

clear

Reset functions

mvr

Clear MVR info

counters

Clear MVR counters

receiver-ports

Clear MVR receiver port counters

if0

(Optional) Interface name

Command Mode

- /exec

clear mvr counters source-ports

clear mvr counters source-ports [ <if0> ]

Syntax Description

clear

Reset functions

mvr

Clear MVR info

counters

Clear MVR counters

source-ports

Clear MVR source port counters

if0

(Optional) Interface name

Command Mode

- /exec

clear nbm flow statistics

clear nbm flow statistics

Syntax Description

clear

Clear

nbm

Non blocking Multicast

flow

NBM flows

statistics

Clear nbm flow statistics

Command Mode

- /exec

clear ngoam

clear ngoam { traceroute { { session { <handle> | all } } | { statistics { summary | { session { <handle> | all } } } } } [ force ] }

Syntax Description

clear

Reset functions

ngoam

ngoam information

traceroute

clear ngoam traceroute

statistics

clear ngoam statistics

summary

clear ngoam statistics summary

session

clear ngoam information by session handle

handle

specify session handle

all

clear stats for all traceroute sessions

force

(Optional) Clear it, do not ask to confirm

Command Mode

- /exec

clear ngoam

clear ngoam { loopback { { session { <ses-hdl> | all } } | { statistics { summary | { session { <ses-hdl> | all } } } } | database [ session <ses-hdl> ] } [ force ] }

Syntax Description

clear

Reset functions

ngoam

ngoam information

loopback

clear ngoam loopback

statistics

clear ngoam statistics

summary

clear ngoam statistics summary

database

clear ngoam database

session

clear ngoam information by session handle

ses-hdl

specify session handle

all

clear stats for all ping sessions

force

(Optional) Clear it, do not ask to confirm

Command Mode

- /exec

clear ngoam pathtrace

clear ngoam pathtrace { { statistics { summary | { session { <handle> | all } } } } | { database { session { <handle> | all } } } } [ force ]

Syntax Description

clear

Reset functions

ngoam

ngoam information

pathtrace

clear ngoam pathrace

database

clear ngoam pathtrace database

statistics

clear ngoam statistics

summary

clear ngoam statistics summary

session

clear ngoam information by session handle

handle

specify session handle

all

clear stats for all pathtrace sessions

force

(Optional) Clear it, do not ask to confirm

Command Mode

- /exec

clear ntp session

clear ntp session

Syntax Description

clear

Reset functions

ntp

Network Time Protocol

session

Clear the ntp configuration session

Command Mode

- /exec

clear ntp statistics

clear ntp statistics { all-peers | io | local | memory }

Syntax Description

clear

Reset functions

ntp

Network Time Protocol

statistics

Clear NTP Statistics

all-peers

Clear per-peer statistics counter of all peers

io

Clear input-output statistics

local

Clear counters maintained by the local NTP

memory

Clear statistics counters related to memory code

Command Mode

- /exec

clear nve peer-ip

clear nve peer-ip <peer_ipv4>

Syntax Description

clear

Clear

nve

Configure NVE information

peer-ip

peer ip

peer_ipv4

peer ip

Command Mode

- /exec

clear nve peers history-log

clear nve peers history-log

Syntax Description

clear

Reset functions

nve

Configure NVE information

peers

NVE Peer

history-log

nve_clear_peers_history_log_cmd

Command Mode

- /exec

clear nve peers interface counters

clear nve peers <addr> interface <nve-if>counters

Syntax Description

clear

Reset functions

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

interface

Interface

Command Mode

- /exec

clear nve peers vni interface counters

clear nve peers { <addr> | all } vni { <vni-id> | all } interface <nve-if>counters

Syntax Description

clear

Reset functions

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

all

Clear counters for all peers/VNIs

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

interface

Interface

Command Mode

- /exec

clear nve vni counters

clear nve vni { <vni-id> | all } counters

Syntax Description

clear

Reset functions

nve

Configure NVE information

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

counters

Counters

all

Clear counters for all vnis

Command Mode

- /exec

clear nvram

clear nvram

Syntax Description

clear

Reset functions

nvram

purge NVRAM

Command Mode

- /exec

clear nxapi-server logs

clear nxapi-server logs

Syntax Description

clear

Reset functions

nxapi-server

Clear NX-API Server

logs

Clear NX-API Server logs

Command Mode

- /exec

clear onep error

clear onep error

Syntax Description

clear

Reset functions

onep

One Platform

error

Clear the ONE-P error buffer

Command Mode

- /exec

clear onep history

clear onep history { { archived } | { all } | { session { all | <onep-session-id> } } }

Syntax Description

clear

Reset functions

onep

One Platform

history

One Platform history trails

archived

One Platform archived session

session

One Platform session

all

All sessions

onep-session-id

Specific session name

Command Mode

- /exec

clear onep session rate-limit

clear onep session rate-limit

Syntax Description

clear

Reset functions

onep

One Platform

session

One Platform session

rate-limit

rate limiting feature info

Command Mode

- /exec

clear onep statistics

clear onep statistics [ session { all | <onep-session-id> } ]

Syntax Description

clear

Reset functions

onep

One Platform

statistics

statistics

session

(Optional) One Platform session

all

(Optional) All sessions

onep-session-id

(Optional) Specific session name

Command Mode

- /exec

clear onep trace

clear onep trace

Syntax Description

clear

Reset functions

onep

One Platform

trace

Clear the ONE-P trace buffer

Command Mode

- /exec

clear ospfv3 database

clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ospfv3

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Clear the LSDB and all neighbors

Command Mode

- /exec

clear ospfv3 event-history

clear ospfv3 [ <tag> ] event-history [ adjacency | event | ha | flooding | lsa | spf | redistribution | cli | hello | spf-trigger | all ]

Syntax Description

clear

Reset functions

ospfv3

Debugging functions

tag

(Optional) Process tag

event-history

Clear the event history buffers

adjacency

(Optional) Adjacency formation logs

event

(Optional) Internal event logs

ha

(Optional) HA and GR logs

flooding

(Optional) LSA flooding logs

lsa

(Optional) LSA generation and databse logs

spf

(Optional) SPF calculation logs

redistribution

(Optional) Redistribution logs

cli

(Optional) Cli logs

hello

(Optional) HELLO related logs

spf-trigger

(Optional) SPF TRIGGER related logs

all

(Optional) All event history buffers

Command Mode

- /exec

clear ospfv3 event-history detail

clear ospfv3 [ <tag> ] event-history detail

Syntax Description

clear

Reset functions

ospfv3

Debugging functions

tag

(Optional) Process tag

event-history

Clear the event history buffer

detail

Detailed event history buffer

Command Mode

- /exec

clear ospfv3 interface

clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface { * | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ospfv3

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

Clear one or more interfaces

*

Clear all interfaces

interface

Interface to clear

Command Mode

- /exec

clear ospfv3 neighbor

clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbor { * | <neighborid> | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ospfv3

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbor

Clear one or more neighbors

*

Clear all neighbors

neighborid

Source IP address, or router ID of the neighbor

interface

Interface to clear all neighbors on

Command Mode

- /exec

clear ospfv3 policy statistics

clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] policy statistics { { redistribute { bgp <as> | { eigrp | isis | rip } <tag> | static | direct | amt | lisp } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

policy

Clear Policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

eigrp

Enhanced Interior Gateway Protocol (EIGRP)

rip

Routing Information Protocol (RIP)

isis

ISO Intermediate-to-Intermediate (IS-IS)

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

static

Static

direct

Directly connected

amt

AMT anycast prefix

lisp

LISP EID-prefixes

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

in

Filter networks sent to this area

out

Filter networks sent from this area

tag

Command Mode

- /exec

clear ospfv3 redistribution

clear ospfv3 [ <tag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ospfv3

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribution

Clear OSPFv3 route redistribution

Command Mode

- /exec

clear ospfv3 statistics

clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ospfv3

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Clear statistics counters

Command Mode

- /exec

clear ospfv3 traffic

clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

ospfv3

Clear OSPF tables

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Clear traffic counters

interface

(Optional) Interface to clear all traffic on

Command Mode

- /exec

clear pktmgr cache interface

clear pktmgr cache { { interface [ <intf> ] } | { vlan [ <vl> ] } }

Syntax Description

clear

Reset functions

pktmgr

Clear Packet Manager information

cache

Clear pktmgr cache

interface

Clear pktmgr related interface information

vlan

Clear pktmgr related vlan information

intf

(Optional) Interface name to clear

vl

(Optional) Vlan

Command Mode

- /exec

clear pktmgr client

clear pktmgr client [ <uuid> ]

Syntax Description

clear

Reset functions

pktmgr

Clear Packet Manager information

client

Clear pktmgr clients counters

uuid

(Optional) Clear pktmgr client counters for given uuid

Command Mode

- /exec

clear pktmgr interface

clear pktmgr interface [ <interface> ]

Syntax Description

clear

Reset functions

pktmgr

Clear Packet Manager information

interface

Clear pktmgr related interface information

interface

(Optional) Interface name to display

Command Mode

- /exec

clear port-profile command-cache

clear port-profile command-cache [ interface <intfname> ]

Syntax Description

clear

Reset functions

port-profile

Clear port-profiles

command-cache

Clear port-profile command cache

interface

(Optional) Name of interface

intfname

(Optional) Name of interface

Command Mode

- /exec

clear port-profile database

clear port-profile database

Syntax Description

clear

Reset functions

port-profile

Clear port-profiles

database

Clear port-profile database

Command Mode

- /exec

clear port-security dynamic address vlan

clear port-security dynamic address <mac-address> vlan <vlanid>

Syntax Description

clear

Reset functions

port-security

Clear port-security information

dynamic

dynamic addresses

address

secure address

mac-address

48 bit mac address

vlan

vlan information

vlanid

vlan id. Enter a value between 1 and 4094

Command Mode

- /exec

clear port-security dynamic interface

clear port-security dynamic interface <if_index> [ vlan <vlanid> ]

Syntax Description

clear

Reset functions

port-security

Clear port-security information

dynamic

dynamic addresses

interface

interface

if_index

ethernet

vlan

(Optional) vlan information

vlanid

(Optional) vlan id. Enter a value between 1 and 4094

Command Mode

- /exec

clear port-security nvram

clear port-security nvram

Syntax Description

clear

Reset functions

port-security

Clear port-security information

nvram

port-security nvram

Command Mode

- /exec

clear processes log all

clear processes log all

Syntax Description

clear

Reset functions

processes

process-related clear commands

log

Delete log files

all

Delete all the log files

Command Mode

- /exec

clear processes log all vdc-all

clear processes log all vdc-all

Syntax Description

clear

Reset functions

processes

process-related clear commands

log

Delete log files

all

Delete all the log files

vdc-all

Delete all the log files in all vdcs

Command Mode

- /exec

clear processes log archive

clear processes log archive [ file <s0> ]

Syntax Description

clear

Reset functions

processes

system manager spawned processes

log

Delete log files

archive

clear all process logs for this vdc from logflash on this module

file

(Optional) delete a log file on logflash

s0

(Optional) Name of file in directory 'log

Command Mode

- /exec

clear processes log pid

clear processes log pid <i0>

Syntax Description

clear

Reset functions

processes

process-related clear commands

log

Delete log files

pid

Delete log file of a specific process

i0

pid of the process

Command Mode

- /exec

clear processes vdc log all

clear processes vdc <e-vdc2> log all

Syntax Description

clear

Reset functions

processes

process-related clear commands

vdc

process-related clear commands in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Delete log files

all

Delete all the log files

Command Mode

- /exec

clear processes vdc log pid

clear processes vdc <e-vdc2> log pid <i1>

Syntax Description

clear

Reset functions

processes

process-related clear commands

vdc

process-related clear commands in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Delete log files

pid

Delete log file of a specific process

i1

pid of the process

Command Mode

- /exec

clear ptp corrections

clear ptp corrections

Syntax Description

clear

Reset functions

ptp

Precision Time Protocol (IEEE 1588) Subsystem

corrections

Clear history of PTP corrections

Command Mode

- /exec

clear ptp counters interface

clear ptp counters { interface <if0> | all }

Syntax Description

clear

Reset functions

ptp

Precision Time Protocol (IEEE 1588) Subsystem

counters

Clear PTP packet counters

interface

Clear for specific interface

all

Clear for all interfaces

if0

Command Mode

- /exec

clear qos mpls-snmp

clear qos mpls-snmp

Syntax Description

clear

Reset functions

mpls-snmp

MPLS default table-map and snmp indices in pss

Command Mode

- /exec

clear qos policies

clear qos policies

Syntax Description

clear

Reset functions

policies

Clear default policies

Command Mode

- /exec

clear qos policies force

clear qos policies force

Syntax Description

clear

Reset functions

policies

Clear default policies

force

Clear forcefully

Command Mode

- /exec

clear qos statistics

clear qos statistics [ { interface [ <iface-list> ] | vlan [ <vlan-list> ] } [ input | output ] [ type <qos-or-q> ] ]

Syntax Description

clear

Reset functions

statistics

Clear statistics

interface

(Optional) Clear statistics on a interface

iface-list

(Optional) List of Interfaces

vlan

(Optional) 802.1Q vlan

vlan-list

(Optional) List of vlan ids

input

(Optional) Input Service policy

output

(Optional) Output Service policy

type

(Optional) Policy type

qos-or-q

(Optional)

Command Mode

- /exec

clear queuing burst-detect

clear queuing burst-detect [ interface <if_name> [ queue <queue_num> ] ] [ module <module> ]

Syntax Description

clear

Clear all entries

queuing

Queuing related information

burst-detect

Out of Band micro-burst queue statistics

interface

(Optional) Interface

if_name

(Optional) interface name

queue

(Optional) Queue number for displaying statistics

queue_num

(Optional) Queue number

module

(Optional) Slot/module

module

(Optional) Slot/module number

Command Mode

- /exec

clear queuing pfc-queue

clear queuing pfc-queue [ interface <if_list> ]

Syntax Description

clear

Reset functions

queuing

clear queuing related counters

pfc-queue

clear watchdog timers

interface

(Optional) Interface

if_list

(Optional) List of interfaces

Command Mode

- /exec

clear queuing pfc-queue interface

clear queuing pfc-queue interface <if_list>

Syntax Description

clear

Reset functions

queuing

clear queuing related counters

pfc-queue

clear watchdog timers

interface

Interface

if_list

List of interfaces

Command Mode

- /exec

clear radius-server statistics

clear radius-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } } ]

Syntax Description

clear

Reset functions

radius-server

Clear RADIUS related parameters

statistics

Clear RADIUS statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

clear radius session

clear radius session

Syntax Description

clear

Reset functions

radius

clear to be commited RADIUS config and lock in fabric

session

clear to be commited RADIUS config and lock in fabric

Command Mode

- /exec

clear rmon

clear rmon { alarms | events | logs | hcalarms | all-alarms }

Syntax Description

clear

Reset functions

rmon

Clear RMON tables

alarms

Clear all 32 bit alarms

events

Clear rmon log this also clears rmon event table

logs

Clear rmon log

hcalarms

Clear all 64 bit rmon alarms

all-alarms

Clear all 32 bit and 64 bit rmon alarms

Command Mode

- /exec

clear route-map pbr-statistics

clear route-map { <route-map-name> | <route-map-cfg-name> } pbr-statistics

Syntax Description

clear

Reset functions

route-map

Route-map used for PBR

route-map-name

Route-map name

route-map-cfg-name

Known route-map name

pbr-statistics

Statistics for policy based routing

Command Mode

- /exec

clear routing event-history

clear routing [ ip | ipv4 ] [ unicast ] event-history { add-route | cli | delete-route | detail | errors | general | ha | loop-detection | modify-route | notifications | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary }

Syntax Description

clear

Reset functions

routing

Clear routing information

ip

(Optional) Clear IP commands

ipv4

(Optional) Clear IP commands

unicast

(Optional) Clear unicast information

event-history

Clear routing event log

add-route

Add route

cli

CLI

delete-route

Delete route

detail

Detail

errors

Errors

general

General

ha

HA

loop-detection

Loop detection

modify-route

Modify route

notifications

Notification

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

Command Mode

- /exec

clear routing ip multicast mfdm pending counters

clear routing ip multicast mfdm pending counters [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

routing

Clear routing information

ip

Clear IP commands

multicast

Clear MRIB information

mfdm

Clear MFDM information

pending

Clear MFDM pending information

counters

MFDM counters

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear routing ip multicast rpf-source retry-cache

clear routing ip multicast rpf-source retry-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

routing

Clear routing information

ip

Clear IP commands

multicast

Clear MRIB information

rpf-source

Clear RPF-Source information

retry-cache

Clear retry-cache information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear routing ipv6 event-history

clear routing ipv6 [ unicast ] event-history { am | cli | detail | errors | general | ha | lfe | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary }

Syntax Description

clear

Reset functions

routing

Clear routing information

ipv6

Clear IPv6 commands

unicast

(Optional) Clear unicast information

event-history

Clear routing event log

am

AM

cli

CLI

detail

Detail

errors

Errors

general

General

ha

HA

lfe

LFE

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

Command Mode

- /exec

clear routing ipv6 multicast

clear routing ipv6 multicast { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

routing

Clear routing information

ipv6

Clear IPv6 commands

multicast

Clear multicast routing table

all

Clear all routes

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear routing memstats

clear routing [ ip | ipv4 ] [ unicast ] memstats

Syntax Description

clear

Reset functions

routing

Clear routing information

ip

(Optional) Clear IP commands

ipv4

(Optional) Clear IP commands

unicast

(Optional) Display unicast information

memstats

Clear urib memory statistics

Command Mode

- /exec

clear routing multicast

clear routing [ ip | ipv4 ] multicast { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

clear

Reset functions

routing

Clear routing information

ip

(Optional) Clear IP commands

ipv4

(Optional) Clear IP commands

multicast

Clear multicast routing table

all

Clear all routes

group-prefix

Clear all routes within the Group prefix

group

Clear all routes matching Group

source

(Optional) Clear a (S,G) route

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

clear rpm pss

clear rpm pss { running | startup | all }

Syntax Description

clear

Reset functions

rpm

Route Policy Manager (RPM)

pss

Clear PSS related information

running

Clear the running PSS commands configuration

startup

Clear the startup PSS commands configuration

all

Clear all PSS commands configurarion

Command Mode

- /exec

clear scheduler logfile

clear scheduler logfile

Syntax Description

clear

Reset functions

scheduler

Scheduler clear commands

logfile

Clear scheduler log file

Command Mode

- /exec

clear screen

clear screen

Syntax Description

clear

Reset functions

screen

Clear screen

Command Mode

- /exec

clear session state name

clear session state name <s4>

Syntax Description

clear

Reset functions

session

Reset confg session internals

state

Reset confg session internal state

name

Reset confg session internal state for a given name

s4

Enter the name of the session

Command Mode

- /exec

clear sflow statistics

clear sflow statistics

Syntax Description

clear

Reset functions

sflow

sFlow global configuration

statistics

Clear sFlow statistics

Command Mode

- /exec

clear snmp counters

clear snmp counters

Syntax Description

clear

Reset functions

snmp

Clear SNMP Tables

counters

Clear SNMP counters

Command Mode

- /exec

clear snmp hostconfig

clear snmp hostconfig

Syntax Description

clear

Reset functions

snmp

Clear SNMP Tables

hostconfig

Clear SNMP Host List

Command Mode

- /exec

clear sockets statistics

clear sockets statistics { all | tcp | tcp6 | udp | udp6 | raw | raw6 }

Syntax Description

clear

Reset functions

sockets

Clear sockets statistics

statistics

Clear sockets statistics

all

Clear TCP/UDP/RAW v4/v6 statistics

tcp

Clear TCP v4 statistics

tcp6

Clear TCP v6 statistics

udp

Clear UDP v4 statistics

udp6

Clear UDP v6 statistics

raw

Clear RAW v4 statistics

raw6

Clear RAW v6 statistics

Command Mode

- /exec

clear spanning-tree counters

clear spanning-tree counters [ interface <interface-id> | vlan <vlan-id> | bridge-domain <bd-id> ]

Syntax Description

clear

Reset functions

spanning-tree

Spanning Tree Subsystem

counters

Clear spanning tree statistics

interface

(Optional) Specify an interface as a target for the command

interface-id

(Optional) Specify an interface as a target for the command

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

Command Mode

- /exec

clear spanning-tree detected-protocols

clear spanning-tree detected-protocols [ interface <interface-id> ]

Syntax Description

clear

Reset functions

spanning-tree

Spanning Tree Subsystem

detected-protocols

Restart the protocol migration process

interface

(Optional) Specify an interface as a target for the command

interface-id

(Optional) Specify an interface as a target for the command

Command Mode

- /exec

clear spanning-tree sps-hist

clear spanning-tree sps-hist

Syntax Description

clear

Reset functions

spanning-tree

Spanning Tree Subsystem

sps-hist

Set port state stats

Command Mode

- /exec

clear ssh hosts

clear ssh hosts

Syntax Description

clear

Reset functions

ssh

Clear ssh values

hosts

Clear the list of trusted ssh hosts

Command Mode

- /exec

clear system login failures

clear system login failures

Syntax Description

clear

Reset functions

system

System management commands

login

Secure Login

failures

Clear login failures in the current watch period

Command Mode

- /exec

clear system reset-reason

clear system reset-reason

Syntax Description

clear

Reset functions

system

Clear logs in system

reset-reason

Clear reset-reason logs in the system

Command Mode

- /exec

clear system reset-reason history

clear system reset-reason history

Syntax Description

clear

Reset functions

system

Clear logs in system

reset-reason

Clear reset-reason logs in the system

history

Clear reset-reason history logs in the system

Command Mode

- /exec

clear tacacs-server statistics

clear tacacs-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { autho_statistics <autho_failed_transactions> <autho_succ_transactions> <autho_req_sent> <autho_req_timedout> <autho_resp_no_match> <autho_resp_not_processed> <autho_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } ]

Syntax Description

clear

Reset functions

tacacs-server

Clear TACACS related parameters

statistics

Clear TACACS statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

autho_statistics

(Optional) Authorization Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

autho_failed_transactions

(Optional) Authorization: Failed transactions

autho_succ_transactions

(Optional) Authorization: Successful transactions

autho_req_sent

(Optional) Authorization: Requests sent

autho_req_timedout

(Optional) Authorization: Requests timedout

autho_resp_no_match

(Optional) Authorization: Responses with no matching requests

autho_resp_not_processed

(Optional) Authorization: Responses not processed

autho_resp_error

(Optional) Authorization: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

clear tech-support lock

clear tech-support lock

Syntax Description

clear

Reset functions

tech-support

Gather information for troubleshooting

lock

Clear the lock which prohibits multiple show techs to run in parallel

Command Mode

- /exec

clear tech-support lock

clear tech-support lock

Syntax Description

clear

Reset functions

tech-support

Gather information for troubleshooting

lock

Clear the lock which prohibits multiple show techs to run in parallel

Command Mode

- /exec

clear user

clear user <s0>

Syntax Description

clear

Reset functions

user

Logout a particular user

s0

Enter the username

Command Mode

- /exec

clear veobc counters

clear veobc counters

Syntax Description

clear

Reset function

veobc

Reset the veobc counters

counters

Reset the veobc statistic counters to zero

Command Mode

- /exec

clear vlan access-list counters

clear vlan access-list counters [ <name> ]

Syntax Description

clear

Reset functions

vlan

Vlan commands

access-list

Clear access list statistical information

counters

Clear access list counters

name

(Optional) List name

Command Mode

- /exec

clear vlan counters

clear vlan [ id <vlan-id> ] counters

Syntax Description

clear

Reset functions

vlan

Vlan commands

id

(Optional) clear VLAN counters by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

counters

display counters

Command Mode

- /exec

clear vmtracker counters

clear vmtracker counters

Syntax Description

clear

Clear

vmtracker

Clear vmtracker info

counters

Clear vmtracker counter info

Command Mode

- /exec

clear vpc statistics all

clear vpc statistics all

Syntax Description

clear

Reset functions

vpc

Virtual Port Channel configuration

statistics

Statistics

all

All vPC statistics

Command Mode

- /exec

clear vpc statistics peer-keepalive

clear vpc statistics peer-keepalive

Syntax Description

clear

Reset functions

vpc

Virtual Port Channel configuration

statistics

Statistics

peer-keepalive

peer keepalive module related statistics

Command Mode

- /exec

clear vpc statistics vpc

clear vpc statistics { vpc <vpc_num> | peer-link }

Syntax Description

clear

Reset functions

vpc

Statistics for a specific vPC

statistics

Statistics

vpc_num

Virtual Port Channel number

peer-link

stats for peer-link

Command Mode

- /exec

clear vpc transport statistics

clear vpc transport statistics [ __readonly__ <last-clear-time> ]

Syntax Description

clear

Reset functions

vpc

Virtual Port Channel configuration

transport

cfs transport

statistics

Statistics

__readonly__

(Optional) Read Only

last-clear-time

(Optional) time difference from last clear time

Command Mode

- /exec/

clear vrrp statistics

clear vrrp statistics [ interface <intf_num> ] [ vr <vr_id> ]

Syntax Description

clear

Reset functions

vrrp

Clear virtual router

statistics

Clear global virtual router statistics

interface

(Optional) Select interface

intf_num

(Optional)

vr

(Optional) [1-255] clear virtual router statistics

vr_id

(Optional)

Command Mode

- /exec

clear vrrpv3 event-history

clear vrrpv3 event-history { debugs | errors | msgs | all }

Syntax Description

clear

Reset functions

vrrpv3

VRRPv3 Clear commands

event-history

Clear event history buffers of vrrpv3

debugs

Clear debug event buffer of vrrpv3

errors

Clear errors event buffer of vrrpv3

msgs

Clear MTS event buffer of vrrpv3

all

Clear all event buffers of vrrpv3

Command Mode

- /exec

clear vrrpv3 statistics

clear vrrpv3 statistics [ <interface_num> [ <group_num> ] ] [ <opt_v4_or_v6> ]

Syntax Description

clear

Reset functions

vrrpv3

VRRPv3 Clear commands

statistics

VRRPV3 statistics

interface_num

(Optional) Interface

group_num

(Optional) Group number

opt_v4_or_v6

(Optional) Enter ipv4 or ipv6

Command Mode

- /exec

clear vtp counters

clear vtp counters

Syntax Description

clear

Reset functions

vtp

Clear VTP items

counters

Clear VTP counters

Command Mode

- /exec

clear xl

clear xl

Syntax Description

clear

Reset functions

xl

Command Mode

- /exec

cli alias name

{ cli alias name <s0> <line> | no cli alias name <s0> [ <line> ] }

Syntax Description

no

Negate a command or set its defaults

cli

Configure CLI commands

alias

Define an alias

name

Specify the alias

s0

Alias command

line

Alias definition

Command Mode

- /exec/configure

cli reload parsetree

cli reload parsetree

Syntax Description

cli

reload

parsetree

Command Mode

- /exec

cli show running-config local

cli show running-config local

Syntax Description

cli

show

running-config

local

Command Mode

- /exec

cli var name

cli no var name <s0>

Syntax Description

cli

CLI commands

no

Negate a command or set its defaults

var

Unset a variable

name

Specify a variable name

s0

Variable name

Command Mode

- /exec

cli var name

{ cli var name <s0> <line> | no cli var name <s0> [ <line> ] }

Syntax Description

no

Negate a command or set its defaults

cli

Configure CLI commands

var

Define a variable

name

Specify a variable name

s0

Variable name

line

Variable value

Command Mode

- /exec/configure

cli var name

[no] cli var name <s0>

Syntax Description

no

Negate a command or set its defaults

cli

CLI commands

var

Unset a variable

name

Specify a variable name

s0

Variable name

Command Mode

- /exec

cli var name

cli var name <s0> <line>

Syntax Description

cli

CLI commands

var

Define a variable

name

Specify a variable name

s0

Variable name

line

Variable value

Command Mode

- /exec

cli verifynrun

[no] cli verifynrun

Syntax Description

no

(Optional) Negate a command or set its defaults

cli

CLI commands

verifynrun

Verify and run

Command Mode

- /exec

client-to-client reflection

[no] client-to-client reflection

Syntax Description

no

(Optional) Negate a command or set its defaults

client-to-client

Configure client-to-client route reflection

reflection

reflection of routes permitted

Command Mode

- /exec/configure/router-bgp/router-bgp-af

clis all

clis { no debug | undebug } all

Syntax Description

clis

dcos cli command

no

Negate a command or set its defaults

undebug

Disable Debugging functions (See also debug)

debug

Debugging functions

all

Disable

Command Mode

- /exec

clock-tolerance ntp oneway absolute

{ { no | default } clock-tolerance | clock-tolerance ntp oneway { absolute <abs-value> | percent <percentage> } }

Syntax Description

no

clock-tolerance

ntp

default

Set a command to its defaults

clock-tolerance

Set acceptable clock synchronization error

ntp

Acceptable clock synchronization error due to NTP

oneway

Acceptable clock synchronization error in oneway measurement

absolute

Acceptable error in microseconds

percent

Acceptable error as percent of value measured

abs-value

Number in microseconds

percentage

Percentage of one-way delay

Command Mode

- /exec/configure/ip-sla/jitter

clock format 12

[no] clock format { 12-hours | 24-hours }

Syntax Description

no

(Optional) Negate a command or set its defaults

clock

Clock

format

Display format of clock

12-hours

12 hours display

24-hours

24 hours display

Command Mode

- /exec/configure

clock format show-timezone debug

[no] clock format show-timezone debug

Syntax Description

no

(Optional) Negate a command or set its defaults

clock

Clock

format

Display format of clock

show-timezone

Display the configured timezone

debug

Display the configured timezone in debugs

Command Mode

- /exec/configure

clock format show-timezone syslog

[no] clock format show-timezone syslog

Syntax Description

no

(Optional) Negate a command or set its defaults

clock

Clock

format

Display format of clock

show-timezone

Display the configured timezone

syslog

Display the configured timezone in syslogs

Command Mode

- /exec/configure

clock protocol

[no] clock protocol { ntp | ptp | none } vdc <vdc-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

clock

Clock

protocol

protocol

ntp

ntp

ptp

ptp

none

none (clock can be set manually)

vdc

vdc

vdc-id

vdc-id

Command Mode

- /exec/configure

clock set

clock set <s0> <i0> { April <i1> | August <i2> | December <i3> | February <i4> | January <i5> | July <i6> | June <i7> | March <i8> | May <i9> | November <i10> | October <i11> | September <i12> }

Syntax Description

clock

Clock

set

HH:MM:SS Current Time

s0

HH:MM:SS Current Time

i0

Day of the month

April

Month of the year

i1

Enter the year (no abbreviation)

August

Month of the year

i2

Enter the year (no abbreviation)

December

Month of the year

i3

Enter the year (no abbreviation)

February

Month of the year

i4

Enter the year (no abbreviation)

January

Month of the year

i5

enter the year (no abbreviation)

July

Month of the year

i6

Enter the year (no abbreviation)

June

Month of the year

i7

Enter the year (no abbreviation)

March

Month of the year

i8

Enter the year (no abbreviation)

May

Month of the year

i9

Enter the year (no abbreviation)

November

Month of the year

i10

Enter the year (no abbreviation)

October

Month of the year

i11

Enter the year (no abbreviation)

September

Month of the year

i12

Enter the year (no abbreviation)

Command Mode

- /exec

clock summer

{ clock { summer-time <s0> [ <i0> <s1> <s2> <s3> <i1> <s4> <s5> <s6> [ <i2> ] ] | timezone <s7> <i3> <i4> } | no clock { summer-time [ <s0> <i0> <s1> <s2> <s3> <i1> <s4> <s5> <s6> <i2> ] | timezone [ <s7> <i3> <i4> ] } }

Syntax Description

no

Negate a command or set its defaults

clock

Clock

summer-time

Configure summer (daylight savings) time

s0

Name of time zone in summer, such as PDT, CDT, EDT, etc..

i0

(Optional) Week number to start (first week=1, last week=5)

s1

(Optional) Weekday to start

s2

(Optional) Month to start

s3

(Optional) HH:MM Time to start

i1

(Optional) Week number to end (first week=1, last week=5)

s4

(Optional) Weekday to end

s5

(Optional) Month to end

s6

(Optional) HH:MM Time to end

i2

(Optional) Offset to add in minutes

timezone

Configure time zone

s7

Name of time zone, such as PST, MST, CST, EST, etc..

i3

Hours offset from UTC

i4

Minutes offset from UTC

Command Mode

- /exec/configure

clock sync-interval

[no] clock sync-interval <intv>

Syntax Description

no

(Optional) Negate a command or set its defaults

clock

Clock

sync-interval

sync-interval in seconds

intv

interval

Command Mode

- /exec/configure

cluster-id

[no] cluster-id { <ip-cluster-id> | <int-cluster-id> }

Syntax Description

no

(Optional) Negate a command or set its defaults

cluster-id

Configure Route Reflector Cluster-ID

ip-cluster-id

Cluster-id as an IP address

int-cluster-id

Cluster-id as a 32 bit quantity

Command Mode

- /exec/configure/router-bgp/vrf-cmds

collect counter bytes

[no] collect counter { bytes | packets } [ long ]

Syntax Description

collect

Specify a non-key field

counter

Counters to collect

bytes

Total number of bytes

packets

Total number of packets

long

(Optional) Long counter (64 bits)

Command Mode

- /exec/configure/nfm-record

collect flow sampler id

[no] collect flow sampler id

Syntax Description

collect

Specify a non-key field

flow

Flow identifying fields

sampler

Sampler

id

Identifer for sampler used for the flow

Command Mode

- /exec/configure/nfm-record

collect ip version

[no] collect ip version

Syntax Description

collect

Specify a non-key field

ip

IP attributes

version

IPv4 or IPv6

Command Mode

- /exec/configure/nfm-record

collect routing destination as

[no] collect routing destination as [ peer ]

Syntax Description

collect

Specify a non-key field

routing

Routing attributes

destination

AS destination

as

Destination AS number of origin network

peer

(Optional) Destination AS number of the peer network

Command Mode

- /exec/configure/nfm-record

collect routing forwarding-status

[no] collect routing forwarding-status

Syntax Description

collect

Specify a non-key field

routing

Routing attributes

forwarding-status

Forwarding status of the packet

Command Mode

- /exec/configure/nfm-record

collect routing next-hop address ipv4

[no] collect routing next-hop address ipv4 [ bgp ]

Syntax Description

collect

Specify a non-key field

routing

Routing attributes

next-hop

Next hop address

address

Address

ipv4

IPv4 next hop address

bgp

(Optional) BGP next hop IPv4 address

Command Mode

- /exec/configure/nfm-record

collect routing next-hop address ipv6

[no] collect routing next-hop address ipv6 [ bgp ]

Syntax Description

collect

Specify a non-key field

routing

Routing attributes

next-hop

Next hop address

address

Address

ipv6

IPv6 next hop address

bgp

(Optional) BGP next hop IPv6 address

Command Mode

- /exec/configure/nfm-record

collect routing source as

[no] collect routing source as [ peer ]

Syntax Description

collect

Specify a non-key field

routing

Routing attributes

source

AS source

as

AS source

peer

(Optional) Source AS number of the peer network

Command Mode

- /exec/configure/nfm-record

collect timestamp sys-uptime first

[no] collect timestamp sys-uptime { first | last }

Syntax Description

collect

Specify a non-key field

timestamp

Timestamp fields

sys-uptime

System uptime

first

Time the first packet was seen

last

Time the most recent packet was seen

Command Mode

- /exec/configure/nfm-record

collect transport tcp flags

[no] collect transport tcp flags

Syntax Description

collect

Specify a non-key field

transport

Transport layer fields

tcp

TCP layer fields

flags

TCP flags

Command Mode

- /exec/configure/nfm-record

commit

commit

Syntax Description

commit

commit itd session

Command Mode

- /exec/configure/itd-session-device-group

commit

commit

Syntax Description

commit

Commit the current configuration session

Command Mode

- /exec/configure

commit verbose

commit verbose

Syntax Description

commit

Commit the current configuration session

verbose

Commit the current configuration session with more details

Command Mode

- /exec/configure

compress-bitfields ipv6 multicast

[no] compress-bitfields ipv6 multicast

Syntax Description

no

(Optional) Negate a command or set its defaults

compress-bitfields

Compress bitfields for improved memory utilization

ipv6

Use for IPv6 multicast

multicast

Use compressed bitfields for M6RIB and PIM6

Command Mode

- /exec/configure

compress-bitfields ipv6 multicast

[no] compress-bitfields ipv6 multicast

Syntax Description

no

(Optional) Negate a command or set its defaults

compress-bitfields

Compress bitfield for improved memory utilization

ipv6

Use for IPv6 multicast

multicast

Use compressed bitfields for M6RIB and PIM

Command Mode

- /exec/configure

compress-bitfields multicast

[no] compress-bitfields [ ipv4 ] multicast

Syntax Description

no

(Optional) Negate a command or set its defaults

compress-bitfields

Compress bitfield for improved memory utilization

ipv4

(Optional) Use for IPv4 multicast

multicast

Use compressed bitfields for MRIB and PIM

Command Mode

- /exec/configure

conf-offset

[no] conf-offset <offset>

Syntax Description

conf-offset

Configure Confidentiality offset

offset

Confidentiality offset options

Command Mode

- /exec/configure/macsec-policy

confederation identifier

[no] confederation identifier <confed-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

confederation

AS confederation parameters

identifier

Set routing domain confederation AS

confed-id

AS number

Command Mode

- /exec/configure/router-bgp/vrf-cmds

confederation peers

[no] confederation peers <confed-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

confederation

AS confederation parameters

peers

Peer ASs in BGP confederation

confed-id

AS number

Command Mode

- /exec/configure/router-bgp/vrf-cmds

config-source controller

[no] config-source controller

Syntax Description

no

(Optional) Negate a command or set its defaults

config-source

Configuration source for this NVE interface. Defaults to CLI

controller

Controller

Command Mode

- /exec/configure/if-nve

configure

configure [ terminal ]

Syntax Description

configure

Enter configuration mode

terminal

(Optional) Configure the system from terminal input

Command Mode

- /exec

configure maintenance profile normal

[no] configure maintenance profile { normal-mode | maintenance-mode }

Syntax Description

no

(Optional) Negate a command or set its defaults

configure

Enter configuration mode

maintenance

maintenance profile mode

profile

maintenance profile

normal-mode

Normal mode profile

maintenance-mode

Maintenance mode profile

Command Mode

- /exec

configure private

configure private [ sandbox ]

Syntax Description

configure

Enter configuration mode

private

Prototype place holder for config session phase two

sandbox

(Optional) Used by the CLI sandbox

Command Mode

- /exec

configure profile

[no] configure profile <all_conf_profile_name> [ type admin ]

Syntax Description

no

(Optional) Negate a command or set its defaults

configure

Enter configuration mode

profile

Configure profile

all_conf_profile_name

Enter the name of the configure profile

type

(Optional) config profile type

admin

(Optional) config profile admin type

Command Mode

- /exec

configure replace

configure replace { <uri_local> | <uri_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } [ verbose ] [ show-patch ] [ debug ]

Syntax Description

configure

Configure the box

replace

Perform a replace of the running-config

uri_local

Configuration file to use

uri_remote

Configuration file to use

source-interface

(Optional) Select source interface

intf

(Optional)

vrf

(Optional) Display per-VRF information

verbose

(Optional) Show the logs of operation

show-patch

(Optional) Show the patch to be applied

debug

(Optional) Skip errors and proceed with rollback

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

configure session

configure session <s0>

Syntax Description

configure

Enter configuration mode

session

Configure the system in a session

s0

Enter the name of the session

Command Mode

- /exec

configure sync

configure sync

Syntax Description

configure

Enter configuration mode

sync

Configure the system in config-sync mode

Command Mode

- /exec

congestion-control ecn

[no] congestion-control ecn

Syntax Description

no

(Optional) Negate a command or set its defaults

congestion-control

Congestion Control Protocol

ecn

Enable ECN protocol

Command Mode

- /exec/configure/policy-map/type/uf/class

congestion-control random-detect

[no] congestion-control random-detect { [ threshold { burst-optimized | mesh-optimized } ] | { minimum-threshold <min-thresh> [ packets | bytes | kbytes | mbytes ] maximum-threshold <max-thresh> [ packets1 | bytes1 | kbytes1 | mbytes1 ] drop-probability <drop-prob> } } { [ ecn ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

congestion-control

Congestion Control Protocol

random-detect

Enable WRED protocol

threshold

(Optional) Threshold

minimum-threshold

Minimum Threshold

maximum-threshold

Maximum Threshold

burst-optimized

(Optional) Threshold optimized for bursty traffic

mesh-optimized

(Optional) Threshold optimized for mesh traffic

drop-probability

Drop Probability at Maximum Threshold

drop-prob

Drop Probability Value

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo Bytes

mbytes

(Optional) Mega Bytes

packets1

(Optional) Packets

bytes1

(Optional) Bytes

kbytes1

(Optional) Kilo Bytes

mbytes1

(Optional) Mega Bytes

ecn

(Optional) Explicit Congestion Notification

Command Mode

- /exec/configure/policy-map/type/uf/class

congestion-control random-detect forward-nonecn

[no] congestion-control random-detect forward-nonecn

Syntax Description

no

(Optional) Negate the command

congestion-control

Congestion control protocol

random-detect

Enable WRED protocol

forward-nonecn

Forward non ECN capable traffic without WRED dropping

Command Mode

- /exec/configure

congestion-control random-detect global-buffer minimum-threshold maximum-threshold

[no] congestion-control random-detect global-buffer minimum-threshold { <min-thresh> [ packets | bytes | kbytes | mbytes ] } maximum-threshold { <max-thresh> [ packets1 | bytes1 | kbytes1 | mbytes1 ] }

Syntax Description

no

(Optional) Negate the command

congestion-control

Congestion control protocol

random-detect

Enable WRED protocol

global-buffer

global buffer threshold

minimum-threshold

Specify minimum threshold for WRED

min-thresh

Minimum threshold value

maximum-threshold

Specify maximum threshold for WRED

max-thresh

Maximum threshold value

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

packets1

(Optional) Packets

bytes1

(Optional) Bytes

kbytes1

(Optional) Kilo Bytes

mbytes1

(Optional) Mega Bytes

Command Mode

- /exec/configure

congestion-control tail-drop

[no] congestion-control tail-drop [ threshold { burst-optimized | mesh-optimized } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

congestion-control

Congestion Control Protocol

tail-drop

Enable Tail-Drop

threshold

(Optional) Threshold

burst-optimized

(Optional) Threshold optimized for bursty traffic

mesh-optimized

(Optional) Threshold optimized for mesh traffic

Command Mode

- /exec/configure/policy-map/type/uf/class

connect

[no] connect

Syntax Description

no

(Optional) Negate a command or set its defaults

connect

Connect to remote host

Command Mode

- /exec/configure/vmt-conn

continue

{ continue <value> } | { no continue [ <value> ] }

Syntax Description

no

Negate a command or set its defaults

continue

Continue on a different entry within the route-map

value

Route-map entry sequence number

Command Mode

- /exec/configure/route-map

contract-id

{ contract-id <s0> | no contract-id }

Syntax Description

no

Negate a command or set its defaults

contract-id

Service contract id of the customer

s0

Provide contract number (as specified in the service agreement)

Command Mode

- /exec/configure/callhome

control-plane

control-plane

Syntax Description

control-plane

Enter to control-plane sub-mode

Command Mode

- /exec/configure

control vlan

[no] control vlan <vlan-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

control

ITD control vlan

vlan

control vlan

vlan-id

Control vlan id

Command Mode

- /exec/configure/itd-inout

control vlan

[no] control vlan <vlan-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

control

ITD control vlan

vlan

control vlan

vlan-id

Control vlan id

Command Mode

- /exec/configure/itd-inout

controller-credentials username password 0

[no] controller-credentials username <user> password { 0 <clear> | 7 <encrypted> }

Syntax Description

no

(Optional) Negate a command or set its defaults

controller-credentials

NBM Controller login credentials

username

User ID

user

Enter user ID

password

Password

0

Password that follows should be in clear text

clear

Password in clear text

7

Password that follows should be encrypted text

encrypted

Encrypted password

Command Mode

- /exec/configure/nbm-controller

controller description

{ controller description <ctrlr-desc> | no controller description }

Syntax Description

no

Negate a command or set its defaults

controller

Controller command

description

Controller description

ctrlr-desc

String description of the controller

Command Mode

- /exec/configure/controller-type

controller ip vrf

[no] controller ip <cntlr-ip> vrf { <vrf-name> | <vrf-known-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

controller

Controller

ip

IP Address

cntlr-ip

IP Address of Controller

vrf

vrf context

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec/configure/nbm-controller

controller type l2 identifier

[no] controller type { l2-vxlan | vxlan } identifier <controller-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

controller

Controller command

type

Controller type

l2-vxlan

l2-vxlan

vxlan

vxlan

identifier

Controller identifier

controller-id

Controller id value

Command Mode

- /exec/configure

copp clear policy pps

copp clear policy pps

Syntax Description

copp

copp

clear

clear

policy

policy

pps

pps

Command Mode

- /exec/configure

copp copy profile prefix

copp copy profile <profile_type> { prefix | suffix } <user_string>

Syntax Description

copp

Control-Plane Policing

copy

Make a copy of the CoPP Profile

profile

CoPP Profile

profile_type

CoPP Profile Types

prefix

prefix for the copied policy

suffix

suffix for the copied policy

user_string

Enter prefix/suffix for the copied policy

Command Mode

- /exec

copp distributed-policing enable

[no] copp distributed-policing enable

Syntax Description

no

(Optional) Negate a command or set its defaults

copp

Control-Plane Policing

distributed-policing

distributed policer

enable

enable distributed policing

Command Mode

- /exec/configure

copp profile

[no] copp profile [ <profile_type> ]

Syntax Description

no

Negate a command or set its defaults

copp

Control-Plane Policing

profile

CoPP Profile

profile_type

(Optional) CoPP Profile Types

Command Mode

- /exec/configure

copp profile

copp profile <profile_type>

Syntax Description

copp

Control-Plane Policing

profile

CoPP Profile

profile_type

CoPP Profile Types

Command Mode

- /exec/configure

copp rate-limit disable

[no] copp rate-limit disable

Syntax Description

no

(Optional) Negate a command or set its defaults

copp

copp

rate-limit

rate-limit

disable

Disable rate-limit on CoPP queues

Command Mode

- /exec/configure

copy

copy { { <src_local> { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } | { <src_remote> { <dest_local> [ compact ] | running-config [ echo-commands ] [ stop-at-first-failure ] | startup-config } } [ source-interface <intf> | vrf <vrf-known-name> ] | { <src_core> { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } | { running-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } | { startup-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } }

Syntax Description

copy

Copy from one file to another

src_local

Select source filesystem

src_core

Select source filesystem

dest_local

Select destination filesystem

dest_remote

Select destination filesystem

src_remote

Select source filesystem

vrf

(Optional) Display per-VRF information

source-interface

(Optional) Select source interface

intf

(Optional)

vrf-known-name

(Optional) Known VRF name

compact

(Optional) Compacting NXOS NBI image using scp

running-config

Copy from source to running configuration

running-config-src

Copy running configuration to destination

startup-config

Copy from source to startup configuration

startup-config-src

Copy startup configuration to destination

echo-commands

(Optional) Echo the commands before applying them (to correlate errors)

stop-at-first-failure

(Optional) Stop at first error

Command Mode

- /exec

copy

copy { { <src_local> { <dest_local> | running-config [ echo-commands ] [ stop-at-first-failure ] | startup-config | scheduled-config } } | { <src_core> <dest_local_core> } | { running-config-src { startup-config [ fabric ] | <dest_local_config> } } | { startup-config-src { running-config [ echo-commands ] [ stop-at-first-failure ] | <dest_local_config> } } | { switch-profile-cfg <dest_local_config> } }

Syntax Description

copy

Copy from one file to another

src_local

Select source filesystem

src_core

Select source filesystem

dest_local

Select destination filesystem

dest_local_core

Select destination filesystem

dest_local_config

Select destination filesystem

running-config

Copy from source to running configuration

running-config-src

Copy running configuration to destination

startup-config

Copy from source to startup configuration

startup-config-src

Copy startup configuration to destination

scheduled-config

Schedule configuration at the specified source to be applied at next switch reload

switch-profile-cfg

Copy switch profile running configuration to destination

echo-commands

(Optional) Echo the commands before applying them (to correlate errors)

stop-at-first-failure

(Optional) Stop at first error

fabric

(Optional) Copy from source to fabric startup configuration

Command Mode

- /exec

copy licenses

copy licenses <uri0>

Syntax Description

copy

Copy from one file to another

licenses

Backup license files

uri0

Specify URL (with .tar extension) for backing up license files

Command Mode

- /exec

copy recursive

copy <source> <destination> recursive [ vrf <vrf-known-name> ]

Syntax Description

copy

Copy from one file to another

recursive

Recursively copy files and folders

source

Select source filesystem

destination

Select destination filesystem

vrf

(Optional) Display per-VRF information

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

copy running vdc-all

copy { running-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } | startup-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } vdc-all

Syntax Description

copy

Copy from one file to another

dest_remote

Select destination filesystem

vrf

(Optional) Display per-VRF information

vrf-known-name

(Optional) Known VRF name

source-interface

(Optional) Select source interface

intf

(Optional)

running-config-src

Copy running configuration to destination

startup-config-src

Copy startup configuration to destination

vdc-all

Perform copy for all vdcs

Command Mode

- /exec

copy vdc-all

copy { running-config-src { startup-config | <dest_local_config> } | startup-config-src { running-config | <dest_local_config> } } vdc-all

Syntax Description

copy

Copy from one file to another

dest_local_config

Select destination filesystem

running-config-src

Copy running configuration to destination

startup-config

Copy from source to startup configuration

running-config

Copy from source to running configuration

startup-config-src

Copy startup configuration to destination

vdc-all

Perform copy for all vdcs

Command Mode

- /exec

core-on-no-memory

[no] core-on-no-memory

Syntax Description

no

(Optional) Negate a command or set its defaults

core-on-no-memory

Generate core dump on memory allocation failure

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

core-on-no-memory

[no] core-on-no-memory

Syntax Description

no

(Optional) Negate a command or set its defaults

core-on-no-memory

Generate core dump on memory allocation failure

Command Mode

- /exec/configure/router-ospf

cost

{ cost <cost> } | { no cost [ <cost> ] }

Syntax Description

no

Negate a command or set its defaults

cost

Cost associated with interface

cost

Cost value

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

count

| count

Syntax Description

|

Pipe command output to filter

count

Count number of lines

Command Mode

- /output

counter name value op

counter name <counter-name> value <counter-value> op <op-val>

Syntax Description

counter

Specify the name of the counter

name

Specify the name of the counter

counter-name

Name of the counter

value

Specify the value to be applied to the counter

counter-value

Enter the value

op

Specify the operator to be applied

op-val

Enter the value of the operator

Command Mode

- /exec

cpu threshold

[no] cpu threshold [ rising <risingth> falling <fallingth> interval <seconds> ]

Syntax Description

no

Negate a command or set its defaults

cpu

CPU resource

threshold

Threshold settings

rising

(Optional) Rising threshold setting

risingth

(Optional) Rising threshold in percentage

falling

(Optional) Falling threshold setting

fallingth

(Optional) Falling threshold in percentage

interval

(Optional) Observation interval setting

seconds

(Optional) Observation interval in seconds

Command Mode

- /exec/configure/onep

cpu threshold rising falling interval

cpu threshold rising <risingth> falling <fallingth> interval <seconds>

Syntax Description

cpu

CPU resource

threshold

Threshold settings

rising

Rising threshold setting

risingth

Rising threshold in percentage

falling

Falling threshold setting

fallingth

Falling threshold in percentage

interval

Observation interval setting

seconds

Observation interval in seconds

Command Mode

- /exec/configure/onep

crypto ca authenticate

[no] crypto ca authenticate <s0> [ accept ]

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

authenticate

Authenticate the certificate authority certificate

s0

trustpoint label

accept

(Optional) accept the certificate automatically

Command Mode

- /exec/configure

crypto ca crl request

[no] crypto ca crl request <s0> <uri0>

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

crl

import certificate revocation list

request

import certificate revocation list

s0

trustpoint label

uri0

Specify source file name

Command Mode

- /exec/configure

crypto ca enroll

[no] crypto ca enroll <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

enroll

Create certificate request

s0

trustpoint label

Command Mode

- /exec/configure

crypto ca export pkcs12

[no] crypto ca export <s0> pkcs12 <uri0> <s1>

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

export

export rsa private key and certificates in pkcs#12

s0

trustpoint label

pkcs12

destination file url

uri0

Specify destination file name

s1

passphrase to encrypt the private key

Command Mode

- /exec/configure

crypto ca import certificate

[no] crypto ca import <s0> certificate

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

import

import the certificate or key

s0

trustpoint label

certificate

import the certificate

Command Mode

- /exec/configure

crypto ca import pkcs12

crypto ca import <s0> pkcs12 <uri0> <s1>

Syntax Description

crypto

Set crypto settings

ca

Configure certificate authority related information

import

import the certificate or key

s0

trustpoint label

pkcs12

source file url

uri0

source file url

s1

passphrase to decrypt the private key

Command Mode

- /exec/configure

crypto ca lookup

[no] crypto ca lookup { remote | local | both }

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

lookup

Choose the certstore for authentication

remote

Use remote certstore

local

Use local certstore

both

Use both local and remote certstore

Command Mode

- /exec/configure

crypto ca remote ldap

[no] crypto ca remote ldap { server-group <s0> | [ crl-refresh-time <i0> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

remote

Use ca from remote certstore

ldap

Ldap certstore

crl-refresh-time

(Optional) Configure refresh-time to fetch crl from remote certstore

i0

(Optional) Refresh time value in hours. A value of 0 will now run the refresh routine once.

server-group

Ldap server group

s0

Ldap server group name

Command Mode

- /exec/configure

crypto ca test verify

[no] crypto ca test verify <uri0>

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

test

certificate tests

verify

verify the certificate

uri0

Specify certificate file name

Command Mode

- /exec/configure

crypto ca trustpoint

[no] crypto ca trustpoint <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

ca

Configure certificate authority related information

trustpoint

Configure trustpoint certificate authority

s0

trustpoint label

Command Mode

- /exec/configure

crypto cert ssh-authorize

[no] crypto cert ssh-authorize [ <s0> map <s1> [ <s2> ] | default map <s3> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Configure crypto settings

cert

Configure certificate maping filter settings

ssh-authorize

Configure mapping filter for ssh

s0

(Optional) Issuer name of the certificate

map

(Optional) Mapping filter to be applied

s1

(Optional) Name of the mapping filter which is already configured

s2

(Optional) Name of the mapping filter which is already configured

default

(Optional) Default map for ssh authorization

s3

(Optional) Name of the default mapping filter which is already configured

Command Mode

- /exec/configure

crypto certificatemap mapname

[no] crypto certificatemap mapname <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

certificatemap

Configure certificatemap filters

mapname

Create a new filter map

s0

Name of the filter map

Command Mode

- /exec/configure

crypto key generate rsa

[no] crypto key generate rsa [ { [ exportable ] [ modulus <i0> ] | [ label <s0> ] [ [ exportable ] [ modulus1 <i1> ] ] | modulus2 <i2> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

key

Configure key pair related information

generate

Configure key pair generation related information

rsa

Configure rsa key pair generation related information

exportable

(Optional) key-pair is exportable

modulus

(Optional) key-pair size

i0

(Optional) key-pair size

label

(Optional) key-pair label

s0

(Optional) key-pair label

exportable

(Optional) key-pair is exportable

modulus1

(Optional) key-pair size

i1

(Optional) key-pair size

modulus2

(Optional) key-pair size

i2

(Optional) key-pair size

Command Mode

- /exec/configure

crypto key param rsa label modulus

[no] crypto key param rsa label <s0> modulus <i0> [ exportable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

key

Configure key pair related information

param

Configure key pair related information

rsa

Configure rsa key pair related information

label

key-pair label

s0

key-pair label

modulus

key-pair size

i0

key-pair size

exportable

(Optional) key-pair is exportable

Command Mode

- /exec/configure

crypto key zeroize rsa

[no] crypto key zeroize rsa <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

crypto

Set crypto settings

key

Configure key pair related information

zeroize

Delete key-pair

rsa

Delete rsa key-pair

s0

key-pair label

Command Mode

- /exec/configure

cryptographic-algorithm

[no] cryptographic-algorithm <algo>

Syntax Description

no

(Optional) Negate a command or set its defaults

cryptographic-algorithm

Set cryptographic-algorithm to be used

algo

Crytographic-algorithm

Command Mode

- /exec/configure/keychain-key

customer-id

{ customer-id <s0> | no customer-id }

Syntax Description

no

Negate a command or set its defaults

customer-id

customer id

s0

Provide customer id (as specified in the service agreement)

Command Mode

- /exec/configure/callhome

cut

| cut { -b <bytes> | -c <chars> | -f <fields> | -d <delim> | -s | --help } +

Syntax Description

|

Pipe command output to filter

cut

Print selected parts of lines.

-b

output only these bytes

-c

output only these characters

-d

specify other field delimiter (default is TAB).

-f

output only these fields also print any line that contains no delimiter character, unless the -s option is specified

-s

do not print lines not containing delimiters

bytes

{n|n-|n-m|-m} N-th byte, N to end of line, N to M, start of line to N

chars

{n|n-|n-m|-m} N-th char, N to end of line, N to M, start of line to N

fields

{n|n-|n-m|-m} N-th field, N to end of line, N to M, start of line to N

delim

field separator char, TAB is default, use ' ' for space

--help

print help of underlying unix command

Command Mode

- /output

Chapter 5. D Commands

- dampen-igp-metric

- dampening

- dampening

- data-pattern

- data-source

- database-mapping

- databits

- databits

- datapath transport mts

- db-jid

- db-security user password

- db-table

- dead-interval

- dead-interval

- dead-interval

- deadtime

- deadtime

- deadtime

- dec

- default-information originate

- default-information originate

- default-information originate

- default-information originate

- default-information originate

- default-information originate

- default-information originate always rd route-target

- default-metric

- default-metric

- default-metric

- default-metric

- default-metric

- default-originate

- define

- delay

- delay

- delay

- delay restore

- delay restore interface

- delay up

- delete

- delete ca-certificate

- delete certificate

- delete crl

- demand-circuit

- deny

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description

- description description

- dest-ipaddr

- dest-port

- destination-group

- destination-profile

- destination-profile

- destination-profile CiscoTAC-1 alert-group

- destination-profile CiscoTAC-1 email-addr

- destination-profile CiscoTAC-1 http

- destination-profile CiscoTAC-1 message-level

- destination-profile CiscoTAC-1 message-size

- destination-profile CiscoTAC-1 transport-method http

- destination-profile CiscoTAC-1 transport-method email

- destination-profile alert-group

- destination-profile email-addr

- destination-profile format

- destination-profile full-txt-destination alert-group

- destination-profile full-txt-destination email-addr

- destination-profile full-txt-destination http

- destination-profile full-txt-destination message-level

- destination-profile full-txt-destination message-size

- destination-profile full-txt-destination transport-method email

- destination-profile full-txt-destination transport-method http

- destination-profile http

- destination-profile message-level

- destination-profile message-size

- destination-profile short-txt-destination alert-group

- destination-profile short-txt-destination email-addr

- destination-profile short-txt-destination http

- destination-profile short-txt-destination message-size

- destination-profile short-txt-destination message-level

- destination-profile short-txt-destination transport-method email

- destination-profile short-txt-destination transport-method http

- destination-profile transport-method email

- destination-profile transport-method http

- destination-sup interface

- destination

- destination1 interface

- destination

- destination interface

- destination ip

- device-group

- device-group

- devtest sap

- diagnostic bootup level

- diagnostic bootup level bypass

- diagnostic clear result module all diagnostic clear result module test

- diagnostic eem action aggressive

- diagnostic monitor interval module test all hour min second

- diagnostic monitor module all

- diagnostic monitor module test all

- diagnostic ondemand action-on-failure continue failure-count diagnostic ondemand action-on-failure stop

- diagnostic ondemand iteration

- diagnostic ondemand test-parameter module test port_lb packet-length

- diagnostic pss shrink

- diagnostic start module test

- diagnostic stop module test all

- diagnostic test simulation module test diagnostic test simulation module test clear

- diff-clean

- diff-clean all-users

- diff

- dir

- disable-connected-check

- disable-memory-alert-check

- disable-peer-as-check

- disable-policy-batching

- disable

- discard-route external

- discard-route external

- discovery

- distance

- distance

- distance

- distance

- distance

- distance

- distribute-list route in

- distribute into route-map all

- dns

- domain-id

- domain-id secondary

- domain-tag

- dont-capability-negotiate

- dos2nxos

- dot1q

- dot1q

- dot1q default dynamic

- down-bit-ignore

- downlink delay

- dpp set-qos-group

- dscp

- dst-grp

- dual-active exclude interface-vlan

- dual-stage translate xml

- duplex

- duplex

- duplicate-message throttle

- dynamic-capability

- dynamic-med-interval

dampen-igp-metric

dampen-igp-metric <sec> | no dampen-igp-metric

Syntax Description

no

Negate a command or set its defaults

dampen-igp-metric

Dampen IGP metric-related changes

sec

Time interval in seconds

Command Mode

- /exec/configure/router-bgp/router-bgp-af

dampening

[no] dampening [ { <half-life> <reuse-limit> <suppress-limit> <max-suppress-time> } | { route-map <rmap-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

dampening

Configure route flap dampening

half-life

(Optional) Decay half life

reuse-limit

(Optional) Value to start reusing a route

suppress-limit

(Optional) Value to start suppressing a route

max-suppress-time

(Optional) Maximum suppress time for stable route

route-map

(Optional) Apply route-map to specify dampening criteria

rmap-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls

dampening

[no] dampening [ { <half-life> <reuse-limit> <suppress-limit> <max-suppress-time> } | { route-map <rmap-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

dampening

Configure route flap dampening

half-life

(Optional) Decay half life

reuse-limit

(Optional) Value to start reusing a route

suppress-limit

(Optional) Value to start suppressing a route

max-suppress-time

(Optional) Maximum suppress time for stable route

route-map

(Optional) Apply route-map to specify dampening criteria

rmap-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-link-state /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

data-pattern

{ { no | default } data-pattern | data-pattern <hex-pattern> }

Syntax Description

no

default

Set a command to its defaults

data-pattern

Data Pattern

hex-pattern

Data Pattern in Hex

Command Mode

- /exec/configure/ip-sla/udp

data-source

{ data-source <type> } | { no data-source [ <type> ] }

Syntax Description

no

Negate a command or set its defaults

data-source

Specify the data source

type

Command Mode

- /exec/configure/telemetry/sensor-group

database-mapping

{ [ no ] database-mapping { <eid-prefix> | <eid-prefix6> } { redistribute | { { <locator> | <locator6> } priority <priority> weight <weight> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

database-mapping

Configure EID-prefix and locator-set for dynamic-EID

eid-prefix

IP EID-prefix for RLOC static mapping

locator

IP address of LISP-VM routers

priority

Configures which Locators from a set are preferred

priority

Lower priority Locator takes preference

weight

Traffic load-spreading among Locators

weight

Specified in a percentage from 0 to 100

redistribute

Used for redistirbuting into routing protocols

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

databits

[no] databits <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

databits

Set number of databits per character

i0

Number of data bits

Command Mode

- /exec/configure/console

databits

[no] databits <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

databits

Set number of databits per character

i0

Number of data bits

Command Mode

- /exec/configure/com1

datapath transport mts

[no] datapath transport mts

Syntax Description

no

(Optional) Negate a command or set its defaults

datapath

One Platform datapath

transport

transport for datapath

mts

mts

Command Mode

- /exec/configure/onep

db-jid

[no] db-jid <jid> [ key-type <key-type> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

db-jid

Jabber ID of database

jid

Enter Jabber ID of database

key-type

(Optional) Query key type for this database

key-type

(Optional)

Command Mode

- /exec/configure/fabric-db/server-xmpp

db-security user password

[no] db-security user <user> password { 0 <clear> | 7 <encrypted> | <password> } [ shared-secret { 10 <clear> | 7 <encrypted> | <secret> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

db-security

Database Security

user

User ID

user

Enter user ID

password

Password

0

Password that follows should be in clear text

clear

Password in clear text

7

Password that follows should be in encrypted text

encrypted

Encrypted password

password

Enter password in clear text

shared-secret

(Optional) Shared-secret

10

(Optional) Indicates that password that follows should be in clear text

clear

(Optional) Password in clear text

7

(Optional) Password that follows should be in encrypted text

encrypted

(Optional) Encrypted password

secret

(Optional) Enter shared-secret in clear text

Command Mode

- /exec/configure/fabric-db/server-ldap

db-table

[no] db-table <tablename> [ key-type <key-type> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

db-table

Table name to search

tablename

Enter table name to search

key-type

(Optional) Query key type for this table

key-type

(Optional)

Command Mode

- /exec/configure/fabric-db/server-ldap

dead-interval

{ { dead-interval <interval> } | { no dead-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

dead-interval

Dead interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

dead-interval

{ { dead-interval <interval> } | { no dead-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

dead-interval

Dead interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

dead-interval

{ { dead-interval <interval> } | { no dead-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

dead-interval

Dead interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

deadtime

[no] deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes

Command Mode

- /exec/configure/radius

deadtime

[no] deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes

Command Mode

- /exec/configure/ldap

deadtime

[no] deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes

Command Mode

- /exec/configure/tacacs+

dec

dec <expr>

Syntax Description

dec

calculator with results in decimal format

expr

the expression to compute (integer arithmetics)

Command Mode

- /exec

default-information originate

[no] default-information originate [ always ] [ route-map <map-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

RIP control distribution of default route

originate

RIP distribute a default route

always

(Optional) RIP always advertise default route

route-map

(Optional) Policy to constrain redistribution

map-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

default-information originate

[no] default-information originate [ always ] [ route-map <policy-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control distribution of default route

originate

Distribute a default route

always

(Optional) Always advertise default route

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

default-information originate

[no] default-information originate [ always ] [ route-map <map-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control origination of a default route

originate

Originate a default route

always

(Optional) Always advertise default route

route-map

(Optional) Route-map to announce default routes

map-name

(Optional) A 'routing-rules' route-map name

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-common

default-information originate

[no] default-information originate [ always ] [ route-map <policy-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control distribution of default route

originate

Distribute a default route

always

(Optional) Always advertise default route

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

default-information originate

[no] default-information originate [ always ] [ route-map <map> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control origination of a default route

originate

Originate a default route

always

(Optional) Always advertise default route

route-map

(Optional) Use a route-map for default route metrics

map

(Optional) Route-map name

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

default-information originate

[no] default-information originate

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control distribution of default information

originate

Distribute a default route

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-label

default-information originate always rd route-target

[no] default-information originate always rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } route-target { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control distribution of default information

originate

Distribute a default route

always

Always advertise default route

rd

VPN Route Distinguisher

ext-comm-rd-aa4nn2

VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

VPN route distinguisher in aa:nn format

route-target

Specify Target VPN Extended Communities

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

- /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6

default-metric

default-metric <metric> | no default-metric [ <metric> ]

Syntax Description

no

Negate a command or set its defaults

default-metric

RIP default metric

metric

RIP metric value

Command Mode

- /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

default-metric

{ default-metric <cost> } | { no default-metric [ <cost> ] }

Syntax Description

no

Negate a command or set its defaults

default-metric

Specify default metric for redistributed routes

cost

Metric value

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

default-metric

{ default-metric <cost> } | { no default-metric [ <cost> ] }

Syntax Description

no

Negate a command or set its defaults

default-metric

Specify default metric for redistributed routes

cost

Metric value

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

default-metric

{ { default-metric <bw> <delay> <rel> <load> <mtu> } | { no default-metric [ <bw> <delay> <rel> <load> <mtu> ] } }

Syntax Description

no

Negate a command or set its defaults

default-metric

Set metric of redistributed routes

bw

Bandwidth in Kbits per second

delay

Delay metric

rel

Reliability metric where 255 is 100% reliable

load

Effective bandwidth metric (Loading) where 255 is 100% loaded

mtu

Maximum Transmission Unit metric of the path

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

default-metric

[no] default-metric <metric>

Syntax Description

no

(Optional) Negate a command or set its defaults

default-metric

Set metric of redistributed routes

metric

Default Metric

Command Mode

- /exec/configure/router-bgp/router-bgp-af

default-originate

[ no | default ] default-originate [ route-map <rmap-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

default-originate

Originate a default toward this peer

route-map

(Optional) Route-map to specify criteria for originating default

rmap-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

define

[no] define <paramname> [ <paramtype> ] [ <paramdesc> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

define

Define a parameter

paramname

Enter the name of the parameter

paramtype

(Optional) param type

paramdesc

(Optional) Enter the parameter description

Command Mode

- /exec/configure/param-list

delay

delay <delay_val> | no delay [ <delay_val> ]

Syntax Description

no

Negate a command or set its defaults

delay

Specify interface throughput delay

delay_val

Throughput delay (tens of microseconds)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel /exec/configure/if-ethernet-all /exec/configure/if-ethernet-p2p /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel-range

delay

delay <delay_val> | no delay [ <delay_val> ]

Syntax Description

no

Negate a command or set its defaults

delay

Specify interface throughput delay

delay_val

Throughput delay (tens of microseconds)

Command Mode

- /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub

delay

delay <microseconds> | no delay

Syntax Description

no

Negate a command or set its defaults

delay

Specify interface throughput delay

microseconds

Throughput delay (tens of microseconds)

Command Mode

- /exec/configure/if-vlan-common

delay restore

delay restore <time-out> | no delay restore

Syntax Description

no

Negate a command or set its defaults

delay

Initialization delay

restore

Delay after restoring peer-link

time-out

Delay in bringing up the vPC links (in seconds)

Command Mode

- /exec/configure/vpc-domain

delay restore interface

delay restore { interface-vlan <time-out> | interface-bridge-domain <time-out> } | no delay restore { interface-vlan | interface-bridge-domain }

Syntax Description

no

Negate a command or set its defaults

delay

Initialization delay

restore

Delay after restoring peer-link

interface-vlan

Delay in bringing-up interface-vlan

interface-bridge-domain

Delay in bringing-up interface-bridge-domain

time-out

Delay in bringing up the interface-vlan or interface-bridge-domain (in seconds)

Command Mode

- /exec/configure/vpc-domain

delay up

delay { { up <up_delay> [ down <down_delay> ] } | { down <down_delay> [ up <up_delay> ] } } | no delay

Syntax Description

no

Negate a command or set its defaults

delay

Tracking delay

up

Delay up change notification

up_delay

Seconds to delay

down

(Optional) Delay down change notification

down_delay

(Optional) Seconds to delay

Command Mode

- /exec/configure/track /exec/configure/tr-list-bool /exec/configure/tr-list-thrp /exec/configure/tr-list-thrw

delete

delete { <uri0> | <uri1> | <uri2> } [ no-prompt ]

Syntax Description

delete

delete a file or directory

uri0

Delete a file or directory

uri1

Delete a file or directory on expansion flash

uri2

Directory or filename on logflash

no-prompt

(Optional) Do not prompt for multiple deletion of files

Command Mode

- /exec

delete ca-certificate

delete ca-certificate

Syntax Description

delete

Delete the certificates

ca-certificate

Delete the ca certificates

Command Mode

- /exec/configure/trustpoint

delete certificate

delete certificate [ force ]

Syntax Description

delete

Delete the certificates

certificate

Delete the identity certificate

force

(Optional) Force delete the identity certificate

Command Mode

- /exec/configure/trustpoint

delete crl

delete crl

Syntax Description

delete

Delete the certificates

crl

Delete the CRL

Command Mode

- /exec/configure/trustpoint

demand-circuit

[no] demand-circuit

Syntax Description

no

(Optional) Negate a command or set its defaults

demand-circuit

OSPF Demand circuit

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

deny

[no] deny { <proto_icmp> | <proto_igmp> | <proto_ip> | <proto_all> | { { <proto_tcp> | <proto_udp> } [ { src <src_port_op> <src_port1_num> } | { src <src_port_range_op> <src_port1_num> <src_port2_num> } ] [ { { dest | dst } <dest_port_op> <dest_port1_num> } | { { dest | dst } <dest_port_range_op> <dest_port1_num> <dest_port2_num> } ] } } [ log ]

Syntax Description

deny

Deny

proto_tcp

Protocol

proto_udp

Protocol

proto_icmp

Protocol

proto_igmp

Protocol

proto_ip

Protocol

proto_all

Protocol

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port_range_op

(Optional) Source Port-Range operator

dest_port_range_op

(Optional) Destination Port-Range operator

src_port1_num

(Optional) Source port number

src_port2_num

(Optional) Source port number

dest_port1_num

(Optional) Destination port number

dest_port2_num

(Optional) Destination port number

src

(Optional) Configure source port parameters

dest

(Optional) Configure destination port parameters

dst

(Optional) Configure destination port parameters

log

(Optional) Log matches against this entry

Command Mode

- /exec/configure/rbacl

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 80 characters

desc_line

Description of maximum 80 characters

Command Mode

- /exec/configure/if-overlay /exec/configure/if-te /exec/configure/if-nve

description

{ [ no ] description <text> }

Syntax Description

description

description for this profile

text

description

Command Mode

- /exec/configure/dot1x-cred

description

description <descr> | no description

Syntax Description

no

Negate the command

description

FEX description

descr

Description

Command Mode

- /exec/configure/fex

description

{ description <line> } | { no description }

Syntax Description

no

Negate a command or set its defaults

description

Description of the VRF

line

VRF description string

Command Mode

- /exec/configure/vrf

description

description <line> | no description

Syntax Description

no

Negate a command or set its defaults

description

Add a description for the role

line

Enter the description string(can include spaces)

Command Mode

- /exec/configure/role

description

{ description <line> | no description }

Syntax Description

no

Negate a command or set its defaults

description

Description of the route-map

line

Route-map description string

Command Mode

- /exec/configure/route-map

description

{ [ no ] description <line> | no description }

Syntax Description

description

Provide a description for this Flow Record

line

Record description string (63 characters maximum)

Command Mode

- /exec/configure/nfm-record

description

{ [ no ] description <line> | no description }

Syntax Description

description

Provide a description for this Flow Monitor

line

Monitor description string (63 characters maximum)

Command Mode

- /exec/configure/nfm-monitor

description

{ [ no ] description <line> | no description }

Syntax Description

description

Provide a description for this Flow Exporter

line

Monitor description string (63 characters maximum)

Command Mode

- /exec/configure/nfm-exporter

description

{ [ no ] description <line> | no description }

Syntax Description

description

Provide a description for this Flow Sampler

line

Sampler description string (63 characters maximum)

Command Mode

- /exec/configure/nfm-sampler

description

{ description <descr> } | { no description }

Syntax Description

description

Configure description of the profile

descr

Description of maximum 64 characters

Command Mode

- /exec/configure/configngoamprofile

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-port-channel /exec/configure/if-eth-port-channel /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub /exec/configure/if-loopback /exec/configure/if-ethernet-all /exec/configure/if-ethernet-p2p /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel-range

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters

Command Mode

- /exec/configure/if-mgmt-ether

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters

Command Mode

- /exec/configure/if-nve

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

no

Negate a command or set its defaults

description

Class-Map description

desc-str

Description of this class-map (up to 200 characters)

Command Mode

- /exec/configure/class-map

description

[no] description <desc-str>

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Class-Map description

desc-str

Description of this class-map (up to 200 characters)

Command Mode

- /exec/configure/class-map/type/queuing

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

no

Negate a command or set its defaults

description

Table-Map description

desc-str

Description of this table-map (up to 200 characters)

Command Mode

- /exec/configure/table-map

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

no

Negate a command or set its defaults

description

Policy-Map description

desc-str

Description of this policy-map (up to 200 characters)

Command Mode

- /exec/configure/policy-map

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

no

Negate a command or set its defaults

description

Policy-Map description

desc-str

Description of this policy-map (up to 200 characters)

Command Mode

- /exec/configure/policy-map/type/queuing

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters

Command Mode

- /exec/configure/if-any-tunnel

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

no

Negate a command or set its defaults

description

Class-Map description

desc-str

Description of this class-map (up to 200 characters)

Command Mode

- /exec/configure/class-map/type/uf

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

no

Negate a command or set its defaults

description

Policy-Map description

desc-str

Description of this policy-map (up to 200 characters)

Command Mode

- /exec/configure/policy-map/type/uf

description

{ description <description_text> | no description [ <description_text> ] }

Syntax Description

no

Negate a command or set its defaults

description

Virtual service description

description_text

Description of this virtual service

Command Mode

- /exec/configure/virt-serv

description

description <describe> | no description

Syntax Description

no

Negate a command or set its defaults

description

Description for the BMP server

describe

Upto 80 characters describing this server

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

description

description <describe> | { no | default } description [ <describe> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

description

Neighbor specific description

describe

Upto 80 characters describing this neighbor

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

description

description [ port-profile ] <desc_line> | no description [ port-profile ] [ <desc_line> ]

Syntax Description

no

Negate a command or set its defaults

description

Enter port-profile description of maximum 80 characters

port-profile

(Optional) Hack for conf-sync

desc_line

Enter port-profile description of maximum 80 characters

Command Mode

- /exec/configure/port-profile

description

description <descr> | no description

Syntax Description

no

Negate a command or set its defaults

description

Session description (max 32 characters)

descr

Enter the description string(can include spaces)

Command Mode

- /exec/configure/monitor-common

description

description <desc_line> | no description

Syntax Description

no

Negate a command or set its defaults

description

Interface specific description

desc_line

Up to 255 characters describing this interface

Command Mode

- /exec/configure/if-vlan-common

description

[no] description <description>

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Configure description for the policy

description

Description for the policy

Command Mode

- /exec/configure/event-manager-applet

description

[no] description

Syntax Description

no

Negate a command or set its defaults

description

Configure description for the policy

Command Mode

- /exec/configure/event-manager-applet

description

[no] description [ <desc> ] | description <desc>

Syntax Description

no

Negate a command or set its defaults

description

Group description

desc

(Optional) Up to 80 characters describing this group

Command Mode

- /exec/configure/if-eth-any/vrrpv3

description

description <desc> | no description

Syntax Description

no

Negate a command or set its defaults

description

Fabric Path topology description

desc

Description of maximum 80 characters

Command Mode

- /exec/configure/fp-topology

description

{ [ no ] description <descrip-string> }

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Provide a description string for the LISP site

descrip-string

Description string

Command Mode

- /exec/configure/lisp-site /exec/configure/vrf/lisp-site

description description

[no] description | description <desc>

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Pathway description

desc

Up to 80 characters describing this pathway

Command Mode

- /exec/configure/if-eth-any/vrrs

dest-ipaddr

{ { no | default } dest-ipaddr | dest-ipaddr { <ip-address> | <hostname> } }

Syntax Description

no

Negate a command or set its defaults

default

Set a command to its defaults

dest-ipaddr

Destination ip address

ip-address

IP address, broadcast disallowed

hostname

IP Hostname, broadcast disallowed

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp

dest-port

{ { no | default } dest-port | dest-port <port> }

Syntax Description

no

default

Set a command to its defaults

dest-port

Destination port

port

udp port number

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp

destination-group

[no] destination-group <dgrp-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-group

Create destination group

dgrp-id

Identifier

Command Mode

- /exec/configure/telemetry

destination-profile

[no] destination-profile <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s0

User defined destination profile name

Command Mode

- /exec/configure/callhome

destination-profile

[no] destination-profile

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Specify the default destination profile

Command Mode

- /exec/configure/telemetry

destination-profile CiscoTAC-1 alert-group

[no] destination-profile CiscoTAC-1 alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events

Command Mode

- /exec/configure/callhome

destination-profile CiscoTAC-1 email-addr

[no] destination-profile CiscoTAC-1 email-addr <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

email-addr

Add email addr

s0

Provide email address, example: jdow@xyz.com

Command Mode

- /exec/configure/callhome

destination-profile CiscoTAC-1 http

[no] destination-profile CiscoTAC-1 http <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

http

Add http or https url

s0

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL

Command Mode

- /exec/configure/callhome

destination-profile CiscoTAC-1 message-level

destination-profile CiscoTAC-1 message-level <i0>

Syntax Description

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode

- /exec/configure/callhome

destination-profile CiscoTAC-1 message-size

destination-profile CiscoTAC-1 message-size <i0>

Syntax Description

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

message-size

Configure maximum message size (default 5000000)

i0

Provide maximum possible message size

Command Mode

- /exec/configure/callhome

destination-profile CiscoTAC-1 transport-method http

[no] destination-profile CiscoTAC-1 transport-method http

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

transport-method

Callhome message sending transport-method

http

http transport-method

Command Mode

- /exec/configure/callhome

destination-profile CiscoTAC-1 transport-method email

[no] destination-profile CiscoTAC-1 transport-method email

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

transport-method

Callhome message sending transport-method

email

email transport-method

Command Mode

- /exec/configure/callhome

destination-profile alert-group

[no] destination-profile <s0> alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s0

User defined destination profile name

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events

Command Mode

- /exec/configure/callhome

destination-profile email-addr

[no] destination-profile <s0> email-addr <s1>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s0

User defined destination profile name

email-addr

Add email addr

s1

Provide email address, example: jdow@xyz.com

Command Mode

- /exec/configure/callhome

destination-profile format

destination-profile <s0> format { full-txt | short-txt | XML }

Syntax Description

destination-profile

Configure destination profiles

s0

User defined destination profile name

format

Callhome message format (default XML)

full-txt

Plain text message format

short-txt

Short text message format

XML

XML message format

Command Mode

- /exec/configure/callhome

destination-profile full-txt-destination alert-group

[no] destination-profile full-txt-destination alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events

Command Mode

- /exec/configure/callhome

destination-profile full-txt-destination email-addr

[no] destination-profile full-txt-destination email-addr <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

email-addr

Add email addr

s0

Provide email address, example: jdow@xyz.com

Command Mode

- /exec/configure/callhome

destination-profile full-txt-destination http

[no] destination-profile full-txt-destination http <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

http

Add http or https url

s0

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL

Command Mode

- /exec/configure/callhome

destination-profile full-txt-destination message-level

destination-profile full-txt-destination message-level <i0>

Syntax Description

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode

- /exec/configure/callhome

destination-profile full-txt-destination message-size

destination-profile full-txt-destination message-size <i0>

Syntax Description

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

message-size

Configure maximum message size (default 2500000)

i0

Provide maximum possible message size

Command Mode

- /exec/configure/callhome

destination-profile full-txt-destination transport-method email

[no] destination-profile full-txt-destination transport-method email

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

transport-method

Callhome message sending transport-method

email

email transport-method

Command Mode

- /exec/configure/callhome

destination-profile full-txt-destination transport-method http

[no] destination-profile full-txt-destination transport-method http

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

transport-method

Callhome message sending transport-method

http

http transport-method

Command Mode

- /exec/configure/callhome

destination-profile http

[no] destination-profile <s4> { http <s2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s4

User defined destination profile name

http

Add http or https url

s2

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL

Command Mode

- /exec/configure/callhome

destination-profile message-level

destination-profile <s0> message-level <i0>

Syntax Description

destination-profile

Configure destination profiles

s0

User defined destination profile name

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode

- /exec/configure/callhome

destination-profile message-size

destination-profile <s0> message-size <i0>

Syntax Description

destination-profile

Configure destination profiles

s0

User defined destination profile name

message-size

Configure maximum message size (default 2500000)

i0

Provide maximum possible message size

Command Mode

- /exec/configure/callhome

destination-profile short-txt-destination alert-group

[no] destination-profile short-txt-destination alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events

Command Mode

- /exec/configure/callhome

destination-profile short-txt-destination email-addr

[no] destination-profile short-txt-destination email-addr <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

email-addr

Add email addr

s0

Provide email address, example: jdow@xyz.com

Command Mode

- /exec/configure/callhome

destination-profile short-txt-destination http

[no] destination-profile short-txt-destination http <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

http

Add http or https url

s0

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL

Command Mode

- /exec/configure/callhome

destination-profile short-txt-destination message-size

destination-profile short-txt-destination message-size <i0>

Syntax Description

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

message-size

Configure maximum message size (default 4000)

i0

Command Mode

- /exec/configure/callhome

destination-profile short-txt-destination message-level

destination-profile short-txt-destination message-level <i0>

Syntax Description

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode

- /exec/configure/callhome

destination-profile short-txt-destination transport-method email

[no] destination-profile short-txt-destination transport-method email

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

transport-method

Callhome message sending transport-method

email

email transport-method

Command Mode

- /exec/configure/callhome

destination-profile short-txt-destination transport-method http

[no] destination-profile short-txt-destination transport-method http

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

transport-method

Callhome message sending transport-method

http

http transport-method

Command Mode

- /exec/configure/callhome

destination-profile transport-method email

[no] destination-profile <s5> transport-method email

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s5

User defined destination profile name

transport-method

Callhome message sending transport-method

email

email transport-method

Command Mode

- /exec/configure/callhome

destination-profile transport-method http

[no] destination-profile <s6> transport-method http

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s6

User defined destination profile name

transport-method

Callhome message sending transport-method

http

http transport-method

Command Mode

- /exec/configure/callhome

destination-sup interface

[no] destination-sup interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-sup

Destination configuration

interface

Configure interfaces

interface

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

destination

{ [ no ] destination { <ipaddr> | <ipv6addr> } [ use-vrf { <vrf_name> | <vrf-known-name> } ] | no destination }

Syntax Description

destination

Specify the destination address

ipaddr

Destination IP address for collector

use-vrf

(Optional) Optional VRF label

vrf_name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure/nfm-exporter

destination1 interface

[no] destination1 interface <interface_range>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination1

Destination configuration

interface

Configure interfaces

interface_range

Command Mode

- /exec/configure/monitor-local-dst

destination

[no] destination | destination <ipaddr>

Syntax Description

no

Negate a command or set its defaults

destination

destination of tunnel

ipaddr

ip address (A.B.C.D)

Command Mode

- /exec/configure/if-te

destination interface

[no] destination interface <interface_range>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination

Destination configuration

interface

Configure interfaces

interface_range

Command Mode

- /exec/configure/monitor-local-dst

destination ip

[no] destination ip <ipaddress>

Syntax Description

no

(Optional) Negate a command or set its defaults

destination

Destination configuration

ip

Configure remote IP address

ipaddress

Command Mode

- /exec/configure/config-monitor-erspan-src

device-group

{ device-group <name> } | { no device-group <name> }

Syntax Description

no

Negate a command or set its defaults

device-group

ITD device group

name

ITD device group name

Command Mode

- /exec/configure/itd

device-group

{ device-group <name> } | { no device-group <name> }

Syntax Description

no

Negate a command or set its defaults

device-group

ITD device group

name

ITD device group name

Command Mode

- /exec/configure/itd

devtest sap

devtest sap <sap> [ exec <func> ]

Syntax Description

devtest

Remote API invocation (helps testing and debugging)

sap

Specify the SAP address of the destination queue

sap

SAP address of the destination queue (0 == Registry)

exec

(Optional) Specify the API name to be invoked on the remote feature

func

(Optional) Examples:

Command Mode

- /exec

diagnostic bootup level

[no] diagnostic bootup level

Syntax Description

no

Negate a command or set its defaults

diagnostic

Diagnostic commands

bootup

Configure Diagnostic for bootup

level

Select diagnostic level

Command Mode

- /exec/configure

diagnostic bootup level bypass

diagnostic bootup level { bypass | complete }

Syntax Description

diagnostic

Diagnostic commands

bootup

Configure Diagnostic for bootup

level

Select diagnostic level

bypass

Skip all bootup test

complete

Complete level

Command Mode

- /exec/configure

diagnostic clear result module all diagnostic clear result module test

diagnostic clear result module all | diagnostic clear result module <module> test { <test-id> | all }

Syntax Description

diagnostic

Diagnostic commands

clear

Erase Diagnostic Test Results/Stats

result

Diagnostic test result

module

Module keyword

module

Module number

all

Select all

test

Diagnostic test selection

test-id

Command Mode

- /exec

diagnostic eem action aggressive

[no] diagnostic eem action aggressive

Syntax Description

no

(Optional) Negate a command or set its defaults

diagnostic

Diagnostic commands

eem

Configure Diagnostic for eem

action

Select diagnostic action

aggressive

Take aggressive default actions

Command Mode

- /exec/configure

diagnostic monitor interval module test all hour min second

diagnostic monitor interval module <module> test { all | <name> | <test-id> } hour <hour-cntr> min <min-cntr> second <sec-cntr> | no diagnostic monitor interval module <module> test { all | <name> | <test-id> }

Syntax Description

no

Negate a command or set its defaults

diagnostic

Diagnostic commands

monitor

Configure diagnostic monitoring test

interval

Configure diagnostic monitoring tests interval

module

Module Keyword

module

Module number

test

Diagnostic test selection

all

Select all test ID

test-id

name

Test name

hour

Hour of the day

hour-cntr

Interval in hours

min

Minute of an hour

min-cntr

Interval in minutes

second

Second of a minute

sec-cntr

Interval in seconds

Command Mode

- /exec/configure

diagnostic monitor module all

[no] diagnostic monitor module all [ test <name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

diagnostic

Diagnostic commands

monitor

Configure diagnostic monitoring test

module

Module Keyword

all

Select all module ID

test

(Optional) Diagnostic test selection

name

(Optional) Test name

Command Mode

- /exec/configure

diagnostic monitor module test all

diagnostic monitor module <module> test { all | <name> | <test-id> } | no diagnostic monitor module <module> test { all | <name> | <test-id> }

Syntax Description

no

Negate a command or set its defaults

diagnostic

Diagnostic commands

monitor

Configure diagnostic monitoring test

module

Module Keyword

module

Module number

test

Diagnostic test selection

all

Select all test ID

test-id

name

Test name

Command Mode

- /exec/configure

diagnostic ondemand action-on-failure continue failure-count diagnostic ondemand action-on-failure stop

diagnostic ondemand action-on-failure continue failure-count <failure-cnt> | diagnostic ondemand action-on-failure stop

Syntax Description

diagnostic

Diagnostic commands

ondemand

On demand diagnostic setting

action-on-failure

Set action to take if test fails

continue

Continue ondemand test until test failure limit is reached

failure-count

Continue failing tests this many times

stop

Stop ondemand tests immediately if a test fails

failure-cnt

Maximum number of test failures allowed

Command Mode

- /exec

diagnostic ondemand iteration

diagnostic ondemand iteration <iteration-count>

Syntax Description

diagnostic

Diagnostic commands

ondemand

On demand diagnostic setting

iteration

Set number of times to repeat ondemand test list

iteration-count

Number of times to repeat ondemand test list

Command Mode

- /exec

diagnostic ondemand test-parameter module test port_lb packet-length

diagnostic ondemand test-parameter module <module> test port_lb packet-length <size>

Syntax Description

diagnostic

Diagnostic commands

ondemand

Ondemand command

test-parameter

Set test parameter

module

Module keyword

module

Module number

test

Diagnostic test selection

port_lb

Port loop back test

packet-length

Size of the packet

size

Packet size for the selected module

Command Mode

- /exec

diagnostic pss shrink

diagnostic pss shrink

Syntax Description

diagnostic

Diagnostic commands

pss

PSS command

shrink

compact the diag_port_lb PSS

Command Mode

- /exec

diagnostic start module test

diagnostic start module <module> test { all | <name> | <test-id> | non-disruptive | per-port } [ port { iall | <port-id> } ]

Syntax Description

diagnostic

Diagnostic commands

start

Starting on demand diagnostic

module

Module keyword

module

Module Number

test

Diagnostic test selection

all

Select all test ID

name

Test name

test-id

non-disruptive

Select the Non-Disruptive test suite [Attribute = N]

per-port

Select the Per-Port test suite [Attribute = P]

port

(Optional) Interface port selection

iall

(Optional) Select all ports

port-id

(Optional)

Command Mode

- /exec

diagnostic stop module test all

diagnostic stop module <module> test { all | <name> | <test-id> }

Syntax Description

diagnostic

Diagnostic commands

stop

Stopping diagnostic

module

Module keyword

module

Module Number

test

Diagnostic test selection

all

Select all test ID

test-id

name

Test name

Command Mode

- /exec

diagnostic test simulation module test diagnostic test simulation module test clear

diagnostic test simulation module <module> test <test-id> [ port { <port-id> | all } ] { success | fail | random-fail } | diagnostic test simulation module <module> test <test-id> clear

Syntax Description

diagnostic

Diagnostic commands

test

Diagnostic test selection

simulation

Simulating Diagnostic result

module

Module keyword

module

Module Number

test

Diagnostic test selection

test-id

port

(Optional) Interface port selection

all

(Optional) Select all ports

port-id

(Optional)

success

pass test result

fail

fail test result

random-fail

fail test result randomly

clear

Stop simulation

Command Mode

- /exec

diff-clean

diff-clean [ all-sessions ]

Syntax Description

diff-clean

remove temp files created by '| diff' filters

all-sessions

(Optional) remove '| diff' temp files from all sessions (past and present!) of current user

Command Mode

- /exec

diff-clean all-users

diff-clean all-users

Syntax Description

diff-clean

remove temp files created by '| diff' filters

all-users

remove '| diff' temp files from all sessions (past and present!) of all users

Command Mode

- /exec

diff

| diff [ again | echo | -c [ <lines> ] | -b | -B | -i | -I <regexp> | -y | --left-column | -W <columns> | -q | -s ] +

Syntax Description

|

Pipe command output to filter

diff

show difference between current and previous invocation (creates temp files: remove them with 'diff-clean' command and dont use it on commands with big outputs, like 'show tech'!)

again

(Optional) dont create new file: use old ones, just change display options or add more filters

echo

(Optional) echo the current file (only effective if no old file)

-c

(Optional) set number of lines of context (default 3)

lines

(Optional) number of lines of context

-b

(Optional) Ignore changes in amount of white space

-B

(Optional) Ignore changes that just insert or delete blank lines

-i

(Optional) Ignore changes in case

-I

(Optional) Ignore changes that just insert or delete lines that match regexp

regexp

(Optional) regexp of lines to ignore

-y

(Optional) Use the side by side output format

--left-column

(Optional) Print only the left column of two common lines in side by side format

-W

(Optional) Use an output width of <columns> in side by side format

columns

(Optional) Use an output width of <columns> in side by side format

-q

(Optional) Report only whether the files differ, not the details of the differences

-s

(Optional) Report when two files are the same

Command Mode

- /output

dir

dir [ <uri0> | <uri1> | <uri2> ] [ __readonly__ { TABLE_dir <fsize> <timestring> <fname> } { <usage> <bytesused> <bytesfree> <bytestotal> } ]

Syntax Description

dir

list files in a directory

uri0

(Optional) Directory or filename

uri1

(Optional) Directory or filename on expansion flash

uri2

(Optional) Directory or filename on log flash

__readonly__

(Optional) Read Only

TABLE_dir

(Optional) show dir

fsize

(Optional) filesize

timestring

(Optional) time string

fname

(Optional) filename

usage

(Optional) usage

bytesused

(Optional) bytes used

bytesfree

(Optional) bytes free

bytestotal

(Optional) bytes total

Command Mode

- /exec

disable-connected-check

[ no | default ] disable-connected-check

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

disable-connected-check

Disable check for directly connected peer

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

disable-memory-alert-check

[no] disable-memory-alert-check

Syntax Description

no

(Optional) Negate a command or set its defaults

disable-memory-alert-check

Disables the system memory alert handling in BGP

Command Mode

- /exec/configure/router-bgp

disable-peer-as-check

[ no | default ] disable-peer-as-check

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

disable-peer-as-check

Disable checking of peer AS-number while advertising

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

disable-policy-batching

[no] disable-policy-batching [ nexthop | { { ipv4 | ipv6 } prefix-list <prfxlist-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

disable-policy-batching

Disable batching evaluation of outbound policy for a peer

nexthop

(Optional) batching based on nexthop

ipv4

(Optional) IPv4 address-family

ipv6

(Optional) IPv6 address-family

prefix-list

(Optional) Apply prefix-list

prfxlist-name

(Optional) Name of prefix-list

Command Mode

- /exec/configure/router-bgp

disable

disable

Syntax Description

disable

disable callhome

Command Mode

- /exec/configure/callhome

discard-route external

[no] discard-route { external | internal }

Syntax Description

no

(Optional) Negate a command or set its defaults

discard-route

Install discard route

external

External route

internal

Internal route

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

discard-route external

[no] discard-route { external | internal }

Syntax Description

no

(Optional) Negate a command or set its defaults

discard-route

Install discard route

external

External route

internal

Internal route

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

discovery

discovery { quick-start | hello { holdtime <link-hello-holdtime> | interval <link-hello-intvl> } | targeted-hello { accept [ from <pfx-list> ] | tgt-holdtime <tgt-hello-holdtime> | tgt-interval <tgt-hello-intvl> } | ignore-transport-address | omit-transport-address | spoofing } | no discovery { quick-start | hello { holdtime | interval } | targeted-hello { accept | tgt-holdtime | tgt-interval } | ignore-transport-address | omit-transport-address | spoofing }

Syntax Description

no

Negate a command or set its defaults

discovery

LDP discovery

quick-start

Enable quick LDP Hello transmissions on interface up

hello

LDP discovery Hello

interval

LDP discovery Hello interval

holdtime

LDP discovery Hello holdtime

link-hello-holdtime

Holdtime in seconds

link-hello-intvl

Hello interval in seconds

targeted-hello

LDP discovery Targeted Hello

accept

Accept targeted hellos

from

(Optional) Prefix list to specify acceptable targeted hello sources

pfx-list

(Optional) Name of prefix list

tgt-holdtime

LDP discovery Targeted Hello holdtime

tgt-hello-holdtime

Holdtime in seconds

tgt-interval

LDP discovery Targeted Hello interval

tgt-hello-intvl

Hello interval in seconds

ignore-transport-address

omit-transport-address

spoofing

Command Mode

- /exec/configure/ldp

distance

distance <admin-dist> | no distance [ <admin-dist> ]

Syntax Description

no

Negate a command or set its defaults

distance

OSPFv3 administrative distance

admin-dist

adminitrative distance value

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

distance

distance <distance> | no distance [ <distance> ]

Syntax Description

no

Negate a command or set its defaults

distance

RIP administrative distance

distance

RIP administrative distance

Command Mode

- /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

distance

distance <admin-dist> | no distance [ <admin-dist> ]

Syntax Description

no

Negate a command or set its defaults

distance

OSPF administrative distance

admin-dist

adminitrative distance value

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

distance

distance <admin-dist> | no distance [ <admin-dist> ]

Syntax Description

no

Negate a command or set its defaults

distance

Administrative distance

admin-dist

Distance value

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv6

distance

{ { distance <int-distance> <ext-distance> } | { no distance [ <int-distance> <ext-distance> ] } }

Syntax Description

no

Negate a command or set its defaults

distance

Define an administrative distance

int-distance

Distance for internal routes

ext-distance

Distance for external routes

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

distance

distance <ebgp-dist> <ibgp-dist> <local-dist> | no distance [ <ebgp-dist> <ibgp-dist> <local-dist> ]

Syntax Description

no

Negate a command or set its defaults

distance

Configure administrative distance

ebgp-dist

Distance for EBGP routes

ibgp-dist

Distance for IBGP routes

local-dist

Distance for local routes

Command Mode

- /exec/configure/router-bgp/router-bgp-af

distribute-list route in

[no] distribute-list { { route-map <map> } | { prefix-list <list> } } { in | out } <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

distribute-list

Filter networks in routing updates

route-map

Use a route-map for route filtering

map

Route-map name

prefix-list

Use a prefix-list for route filtering

list

Reference to prefix-list name

in

Filter incoming routing updates

out

Filter outgoing routing updates

interface

Interface name

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

distribute into route-map all

{ { distribute <src-level> into <dst-level> { { route-map { <map-name> | <rtr_pol_name> } } | all } } | { no distribute <src-level> into <dst-level> [ { route-map { <map-name> | <rtr_pol_name> } } | all ] } }

Syntax Description

no

Negate a command or set its defaults

distribute

Distribute routes between ISIS levels

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

route-map

Route Map to constrain distribution

into

from level-n into level-m

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

all

Distribute all level-n routes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-common

dns

[no] dns { <WORD> } { name-server { <hostname> | <ip-address> } } { [ source-ip { <source-ip-hostname> | <source-ip-address> } ] | [ source-port <src-port> ] } +

Syntax Description

no

(Optional)

source-ip

(Optional) source-port

src-port

(Optional)

dns

DNS Operation

WORD

Target IP Address or Hostname

name-server

Name Server

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

source-port

(Optional) Source Port

Command Mode

- /exec/configure/ip-sla

domain-id

domain-id { <id> | { type <dtype> value <dvalue> } | Null } | no domain-id [ <id> | { type <dtype> value <dvalue> } | Null ]

Syntax Description

no

Negate a command or set its defaults

domain-id

OSPF domain-ID

id

OSPF domain ID in IP address format

type

OSPF domain ID type in Hex format

dtype

OSPF domain ID type in Hex format

value

OSPF domain ID ext. community value in Hex

dvalue

Null

Null Domain-ID

Command Mode

- /exec/configure/router-ospf/vrf

domain-id secondary

domain-id { <id> | { type <dtype> value <dvalue> } | Null } secondary | no domain-id [ <id> | { type <dtype> value <dvalue> } | Null ] secondary

Syntax Description

no

Negate a command or set its defaults

domain-id

OSPF domain-ID

id

OSPF domain ID in IP address format

type

OSPF domain ID type in Hex format

dtype

OSPF domain ID type in Hex format

value

OSPF domain ID ext. community value in Hex

dvalue

Null

Null Domain-ID

secondary

Secondary Domain-ID

Command Mode

- /exec/configure/router-ospf/vrf

domain-tag

[no] domain-tag <as-number>

Syntax Description

no

(Optional) Negate a command or set its defaults

domain-tag

Set OSPF process domain-tag

as-number

AS number

Command Mode

- /exec/configure/router-ospf/vrf

dont-capability-negotiate

[ no | default ] dont-capability-negotiate

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

dont-capability-negotiate

Don't negotiate capability with this neighbor

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

dos2nxos

dos2nxos <uri0>

Syntax Description

dos2nxos

DOS to NXOS text file format converter

uri0

Filename to be displayed

Command Mode

- /exec

dot1q

{ dot1q <dot1q-id> <intf-id> } | { no dot1q }

Syntax Description

no

Negate a command or set its defaults

dot1q

Encapsulation dot1q/bd

dot1q-id

Encapsulation dot1q/bd value

intf-id

Name of the interface for ngoam on which dot1q is configured

Command Mode

- /exec/configure/configngoamprofile

dot1q

{ dot1q <vlan-id> [ cos <cos-val> ] } | { no dot1q }

Syntax Description

no

Negate a command or set its defaults

dot1q

specify flow profile to include dot1q tag

vlan-id

specify flow profile vlan-id

cos

(Optional) specify class of service

cos-val

(Optional) class of service value

Command Mode

- /exec/configure/configngoamprofileflow

dot1q default dynamic

{ dot1q default dynamic } | { no dot1q default }

Syntax Description

no

Negate a command or set its defaults

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

default

Default (wildcard). Match any dot1q when there is no specific dot1q mapping configured

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

down-bit-ignore

{ down-bit-ignore } | { no down-bit-ignore }

Syntax Description

no

Negate a command or set its defaults

down-bit-ignore

Configure a PE router to ignore the DN bit for network summary, external and NSSA external LSA

Command Mode

- /exec/configure/router-ospf/vrf

downlink delay

downlink delay <ena-dis-flg> [ timeout <time-out> ] | no downlink delay

Syntax Description

no

Negate a command or set its defaults

downlink

Change downlink linkup time

delay

delay bringup of downlinks

ena-dis-flg

Enable/Disable downlink delay feature

timeout

(Optional) downlink ports enable delay in seconds

time-out

(Optional) Time out

Command Mode

- /exec/configure

dpp set-qos-group

[no] dpp set-qos-group <qos-group>

Syntax Description

no

(Optional) Negate a command or set its defaults

dpp

Dynamic Packet Prioritization

set-qos-group

QoS group to be mapped

qos-group

QoS Group Value

Command Mode

- /exec/configure/policy-map/type/uf/class

dscp

{ [ no ] dscp <dscp> | no dscp }

Syntax Description

dscp

Optional DSCP

dscp

Differentiated services codepoint value

Command Mode

- /exec/configure/nfm-exporter

dst-grp

[no] dst-grp <d-grp-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

dst-grp

Associated destination group

d-grp-id

Identifier

Command Mode

- /exec/configure/telemetry/subscription

dual-active exclude interface-vlan

dual-active exclude interface-vlan <allow-vlans> | no dual-active exclude interface-vlan

Syntax Description

no

Negate a command or set its defaults

dual-active

Configuration when peer link is down but peer is alive

interface-vlan

Interface vlan and bridge-domain configuration

exclude

Interface vlans to exclude from suspension when dual-active

allow-vlans

Set allowed interface vlans/bridge-domain

Command Mode

- /exec/configure/vpc-domain

dual-stage translate xml

dual-stage translate <dn> { xml | json } <in_file> <out_file> [ exec-python ] [ delete-files ]

Syntax Description

dual-stage

Related to 2 stage commit

translate

Convert from external restful format to internal JSON

xml

Input file has XML

json

Input file has JSON

dn

DN param

in_file

Input file name

out_file

Output file name

exec-python

(Optional) Execute python script after translation

delete-files

(Optional) Delete input and output files after translation

Command Mode

- /exec

duplex

duplex <duplex_mode> | no duplex [ <duplex_mode> ]

Syntax Description

no

Negate a command or set its defaults

duplex

Enter the port duplex mode

duplex_mode

Interface duplex mode

Command Mode

- /exec/configure/if-mgmt-ether

duplex

duplex <duplex_mode> | no duplex [ <duplex_mode> ]

Syntax Description

no

Negate a command or set its defaults

duplex

Enter the port duplex mode

duplex_mode

Interface duplex mode

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

duplicate-message throttle

[no] duplicate-message throttle

Syntax Description

no

(Optional) Negate a command or set its defaults

duplicate-message

Configure throttling of duplicate callhome alert messages

throttle

Enable throttling of duplicate callhome alert messages

Command Mode

- /exec/configure/callhome

dynamic-capability

[ no | default ] dynamic-capability

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

dynamic-capability

Dynamic capability

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

dynamic-med-interval

[no] dynamic-med-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

dynamic-med-interval

Sets the interval for dampening of med changes

sec

Time interval in seconds

Command Mode

- /exec/configure/router-bgp

Chapter 6. E Commands

- ebgp-multihop

- echo

- eem test

- eemtest policy-add

- eemtest policy-remove

- egress-engineering

- eid-notify authentication-key

- eid-notify key

- eid-prefix

- eigrp event-history cli size

- eigrp file-debug

- eltm distribute

- email-addr

- email-contact

- email

- email

- emulated-switch

- enable

- enable

- enable Cert

- enable secret 0 5

- encapsulation dot1Q

- encapsulation dot1Q

- encapsulation mpls

- encrypt pause-frame

- encryption decrypt type6

- encryption delete type6

- encryption re-encrypt obfuscated

- end-job

- end

- enforce-first-as

- enrollment terminal

- errdisable

- errdisable detect cause acl-exception

- errdisable port detect cause acl-exception

- errdisable recovery interval

- erspan-id

- ethanalyzer local

- ethernet-segment

- ethernet-segment delay-restore time

- ethernet-tag encapsulation dot1q default static

- ethernet-tag encapsulation dot1q static

- ethernet-tag encapsulation vni default static

- ethernet-tag encapsulation vni static

- evb batch-response disable

- evb mac

- evb reinit-keep-alive

- evb resource-wait-delay

- event-history

- event-history acllog category all

- event-history acllog category all

- event-history acllog category fc2

- event-history acllog category fc2

- event-history acllog category mts

- event-history acllog category mts

- event-history adbm category all

- event-history adbm category all

- event-history adbm category fc2

- event-history adbm category fc2

- event-history adbm category mts

- event-history adbm category mts

- event-history callhome

- event-history capability

- event-history cli

- event-history copp category all

- event-history copp category all

- event-history copp category fc2

- event-history copp category fc2

- event-history copp category mts

- event-history copp category mts

- event-history dot1x

- event-history drap category all

- event-history drap category all

- event-history drap category mts

- event-history drap category mts

- event-history eltm category all

- event-history eltm category all

- event-history eltm category fc2

- event-history eltm category fc2

- event-history eltm category mts

- event-history eltm category mts

- event-history errors

- event-history ethpm

- event-history events

- event-history exceptionlog

- event-history fex category all

- event-history fex category all

- event-history fex category fc2

- event-history fex category fc2

- event-history fex category mts

- event-history fex category mts

- event-history im category mts

- event-history imp category all

- event-history imp category all

- event-history imp category fc2

- event-history imp category fc2

- event-history imp category mts

- event-history imp category mts

- event-history interface vlan category all

- event-history interface vlan category mts

- event-history interface vlan category mts

- event-history keystore

- event-history lacp category all

- event-history lacp category all

- event-history lacp category fc2

- event-history lacp category fc2

- event-history lacp category mts

- event-history lacp category mts

- event-history license

- event-history lldp category all

- event-history lldp category all

- event-history lldp category fc2

- event-history lldp category fc2

- event-history lldp category mts

- event-history lldp category mts

- event-history m2rib category all

- event-history mfdm category all

- event-history mfdm category all

- event-history mfdm category fc2

- event-history mfdm category fc2

- event-history mfdm category mts

- event-history mfdm category mts

- event-history mmode category all

- event-history module

- event-history pfstat category all

- event-history pfstat category all

- event-history pfstat category fc2

- event-history pfstat category fc2

- event-history pfstat category mts

- event-history pfstat category mts

- event-history platform buffer-size

- event-history platform category all

- event-history platform category all

- event-history pltfm_config category all

- event-history pltfm_config category all

- event-history pltfm_config category fc2

- event-history pltfm_config category fc2

- event-history pltfm_config category mts

- event-history pltfm_config category mts

- event-history plugin

- event-history poap category all

- event-history poap category all

- event-history poap category fc2

- event-history poap category fc2

- event-history poap category mts

- event-history poap category mts

- event-history port-profile category all

- event-history port-profile category mts

- event-history port-security category all

- event-history port-security category all

- event-history port-security category fc2

- event-history port-security category fc2

- event-history port-security category mts

- event-history port-security category mts

- event-history port_client category all

- event-history port_client category all

- event-history port_client category fc2

- event-history port_client category fc2

- event-history port_client category mts

- event-history port_client category mts

- event-history private-vlan category all

- event-history private-vlan category mts

- event-history private-vlan category mts

- event-history sensor

- event-history session-mgr category all

- event-history session-mgr category all

- event-history session-mgr category mts

- event-history session-mgr category mts

- event-history sflow

- event-history snmp

- event-history spanning-tree category all

- event-history spm category all

- event-history spm category all

- event-history spm category fc2

- event-history spm category fc2

- event-history spm category mts

- event-history spm category mts

- event-history stripcl category all

- event-history stripcl category all

- event-history stripcl category mts

- event-history tamnw category all

- event-history tamnw category all

- event-history tamnw category fc2

- event-history tamnw category fc2

- event-history tamnw category mts

- event-history tamnw category mts

- event-history udld category all

- event-history ufdm category all

- event-history ufdm category all

- event-history ufdm category fc2

- event-history ufdm category fc2

- event-history ufdm category mts

- event-history ufdm category mts

- event-history vdc category all

- event-history vdc category all

- event-history vdc category mts

- event-history vlan category all

- event-history vlan category mts

- event-history vlan category mts

- event-history xbar category all

- event-history xbar category all

- event-history xbar category debug

- event-history xbar category debug

- event-history xbar category mts

- event-history xbar category mts

- event-log-size

- event-logging

- event

- event application sub-system type

- event cli match

- event counter name entry-val entry-op

- event fanabsent time

- event fanbad time

- event fib adjacency extra

- event fib resource tcam usage

- event fib route

- event gold module test testing-type scheduled consecutive-failure

- event interface name parameter entry-val entry-op entry-type poll-interval

- event manager applet

- event manager clear counter

- event manager clear history events

- event manager command maximum-timeout

- event manager environment

- event manager policy

- event manager run

- event manager script

- event memory

- event module-failure type module count

- event module status module1

- event neighbor-discovery

- event none

- event oir fan

- event oir module

- event oir powersupply

- event policy-default count

- event poweroverbudget

- event snmp oid get-type exact entry-op entry-val poll-interval

- event storm-control

- event syslog pattern

- event sysmgr memory major minor clear

- event sysmgr switchover count time

- event temperature threshold

- event test match

- event timer

- event track state

- evpn

- evpn esi multihoming

- evpn multihoming core-tracking

- exceptionlog module syserr devid errtype errcode phylayer ports harderror

- exclude access-list

- exclude access-list

- exec-timeout

- exec-timeout

- exit

- exit

- exp

- explicit-null

- explicit-path identifier

- export map

- export vrf default map

- exporter

ebgp-multihop

ebgp-multihop <ebgp-ttl> | { no | default } ebgp-multihop [ <ebgp-ttl> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

ebgp-multihop

Specify multihop TTL for remote peer

ebgp-ttl

EBGP TTL value

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

echo

echo [ -e ] [ <line> ]

Syntax Description

echo

echo argument back to screen (useful for scripts)

-e

(Optional) enable interpretation of the backslash-escaped characters

line

(Optional) the string to echo (use quotes if string contains spaces)

Command Mode

- /exec

eem test

eem test <param>

Syntax Description

eem

Event Manager command

test

Do test action

param

Test action parameter (dummy value)

Command Mode

- /exec

eemtest policy-add

eemtest policy-add <name> [ override <override-name> ]

Syntax Description

eemtest

EEM test commands

policy-add

Add a client policy

name

Name of policy (cannot have underscore in first two characters)

override

(Optional) Override a system policy

override-name

(Optional) Name of the system policy to override - should begin with double underscore

Command Mode

- /exec

eemtest policy-remove

eemtest policy-remove <name> [ override <override-name> ]

Syntax Description

eemtest

EEM test commands

policy-remove

Remove a client policy

name

Name of policy (cannot have underscore in first two characters)

override

(Optional) Override a system policy

override-name

(Optional) Name of the system policy to override - should begin with double underscore

Command Mode

- /exec

egress-engineering

[ no | default ] egress-engineering [ peer-set <peer-set-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

egress-engineering

Configure Egress Peer Engineering (EPE) for peer

peer-set

(Optional) Configure EPE Peer-Set

peer-set-name

(Optional) EPE Peer-Set name

Command Mode

- /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-neighbor-stmp /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

eid-notify authentication-key

[no] eid-notify authentication-key <key>

Syntax Description

no

(Optional) Negate a command or set its defaults

eid-notify

First hop xTR notification

authentication-key

Authentication key used by EID-Nofity destinations

key

SHA-1 password

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

eid-notify key

[no] eid-notify <addr> key <auth-key>

Syntax Description

no

(Optional) Negate a command or set its defaults

eid-notify

First hop xTR notification

addr

Address of the first-hop xTR to be notified

key

Authentication key used by EID-Nofity destinations

auth-key

SHA-1 password

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

eid-prefix

{ [ no ] eid-prefix { <eid-prefix> | <eid-prefix6> } [ instance-id <iid> ] [ route-tag <tag> ] [ accept-more-specifics ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

eid-prefix

EID-prefix for LISP site

eid-prefix

IP EID-prefix of the site

instance-id

(Optional) Configures instance-ID for site's EID-prefix

iid

(Optional) 24-bit instance-ID value

route-tag

(Optional) Route tag for LISP EID-prefix routes

tag

(Optional) 32-bit value for tag

accept-more-specifics

(Optional) Allow more-specifics of site EID-prefix to register

Command Mode

- /exec/configure/lisp-site /exec/configure/vrf/lisp-site

eigrp event-history cli size

[no] eigrp [ <eigrp-ptag> ] event-history { cli } size { <size_in_text> | <size_in_Kbytes> }

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Event History of EIGRP

cli

EIGRP CLI related events

size

Configure the size of the event-hist buffer

size_in_text

Buffer size

size_in_Kbytes

Size of the file in kbytes

Command Mode

- /exec/configure

eigrp file-debug

[no] eigrp file-debug

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

EIGRP

file-debug

Collect all debugs to a file

Command Mode

- /exec/configure

eltm distribute

[no] eltm distribute

Syntax Description

no

(Optional)

eltm

ELTM Configuration

distribute

Distribute ELTM Info to clients

Command Mode

- /exec/configure

email-addr

[no] email-addr <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

email-addr

Add email addr to send output of jobs configured for this schedule

s0

Provide email address, example: jdow@xyz.com

Command Mode

- /exec/configure/schedule

email-contact

{ email-contact <s0> | no email-contact }

Syntax Description

no

Negate a command or set its defaults

email-contact

email address of the contact person

s0

Provide email address, example: jdow@xyz.com

Command Mode

- /exec/configure/callhome

email

| email [ -f <fromemail> | -r <replytoemail> | -S <smtphost> | -P <smtpport> | -s <subject> | -c <vrf-known-name> ] + <toemail>

Syntax Description

|

Pipe command output to filter

email

Email command output

-f

(Optional) From address

fromemail

(Optional) Email address

-r

(Optional) Reply to address

replytoemail

(Optional) Email address

-S

(Optional) SMTP host

smtphost

(Optional) IPV4/IPV6 address or DNS name

-P

(Optional) SMTP port

smtpport

(Optional) SMTP port number

-s

(Optional) Subject

subject

(Optional) Email subject

-c

(Optional) VRF

vrf-known-name

(Optional) VRF name

toemail

Recipient email address

Command Mode

- /output

email

[no] email

Syntax Description

no

(Optional) Negate a command or set its defaults

email

Configure pipe email

Command Mode

- /exec/configure

emulated-switch

[no] emulated-switch <switch-id> <graph-id> <em-type>

Syntax Description

no

(Optional) Negate a command or set its defaults

emulated-switch

Generate an emulated switch id, test cmd

switch-id

Enter the switch id 1-4094

graph-id

Enter 1 or 2

em-type

Enter es or as

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

enable

enable [ <enable-level> ]

Syntax Description

enable

Turn on privileged commands

enable-level

(Optional) Enable Level

Command Mode

- /exec

enable

[no] enable

Syntax Description

no

(Optional) Negate a command or set its defaults

enable

enable callhome

Command Mode

- /exec/configure/callhome

enable Cert

[no] enable { Cert-DN-match | user-server-group }

Syntax Description

no

(Optional) Negate a command or set its defaults

enable

Enable

user-server-group

Enable/Disable group validation

Cert-DN-match

Enable/Disable Cert-DN matching

Command Mode

- /exec/configure/ldap

enable secret 0 5

{ [ test ] enable secret { 0 <key1> | 5 <key2> | <key3> } [ { priv-lvl <n> | all } ] } | { no enable secret [ { 0 <key1> | 5 <key2> | <key3> } ] [ { priv-lvl <n> | all } ] }

Syntax Description

no

Negate a command or set its defaults

test

(Optional) test secrets

enable

create secret for privilege escalation

secret

create secret for privilege escalation (defaults to highest priv-lvl 14/15)

0

Indicates that the secret that follows should be in clear text

key1

Secret for privilege escalation (clear text)

5

Indicates that the secret that follows should be encrypted

key2

strongly encrypted secret

key3

Secret for user privilege escalation (clear text)

priv-lvl

(Optional) Privilege-level to which this secret belongs

n

(Optional) Privilege-level

all

(Optional) Add/remove all privilege level secrets

Command Mode

- /exec/configure

encapsulation dot1Q

encapsulation dot1Q <vlan_id> | no encapsulation dot1Q [ <vlan_id> ]

Syntax Description

no

Negate a command or set its defaults

encapsulation

Set encapsulation type for an interface

dot1Q

IEEE 802.1Q Virtual LAN

vlan_id

IEEE 802.1Q VLAN ID required

Command Mode

- /exec/configure/if-ether-sub /exec/configure/if-port-channel-sub /exec/configure/if-ether-sub-p2p

encapsulation dot1Q

encapsulation dot1Q <vlan_id> | no encapsulation dot1Q [ <vlan_id> ]

Syntax Description

no

Negate a command or set its defaults

encapsulation

Set encapsulation type for an interface

dot1Q

IEEE 802.1Q Virtual LAN

vlan_id

IEEE 802.1Q VLAN ID required

Command Mode

- /exec/configure/if-gig-ether-sub /exec/configure/if-remote-ethernet-sub

encapsulation mpls

[ no | default ] encapsulation mpls

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

encapsulation

Configure encapsulation type for EVPN routes

mpls

Mpls encapsulation

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

encrypt pause-frame

[no] encrypt pause-frame

Syntax Description

encrypt

Enable/disable encryption for specific type of frames

pause-frame

Ethernet PAUSE frames

Command Mode

- /exec/configure/cts-dot1x /exec/configure/cts-manual

encryption decrypt type6

encryption decrypt type6

Syntax Description

encryption

Strong encryption for credential(s)

decrypt

Decrypts strongly encrypted secret(s) to obfuscated type(s)

type6

type6 secrets present in system

Command Mode

- /exec

encryption delete type6

encryption delete type6 [ <uuid> | <name> ]

Syntax Description

encryption

Strong encryption for credential(s)

delete

Deletes strongly encrypted secret(s)

type6

type6 secrets present in system

uuid

(Optional) uuid of the app

name

(Optional) Service name

Command Mode

- /exec

encryption re-encrypt obfuscated

encryption re-encrypt obfuscated

Syntax Description

encryption

Strong encryption for credential(s)

re-encrypt

Re-encrypts weekly encrypted secret(s) to strongly encrypted secret(s)

obfuscated

type-3/type-7/clear-text secrets present in system

Command Mode

- /exec

end-job

end-job

Syntax Description

end-job

End scheduler job

Command Mode

- /exec

end

end

Syntax Description

end

Go to exec mode

Command Mode

- /global

enforce-first-as

[no] enforce-first-as

Syntax Description

no

(Optional) Negate a command or set its defaults

enforce-first-as

Enforce neighbor AS is the first AS in AS-PATH attribute (EBGP)

Command Mode

- /exec/configure/router-bgp

enrollment terminal

[no] enrollment terminal

Syntax Description

no

(Optional) Negate a command or set its defaults

enrollment

Configure trustpoint enrollment

terminal

Configure trustpoint enrollment via console

Command Mode

- /exec/configure/trustpoint

errdisable

errdisable { detect cause_detect { all_cause | link-flap_cause | loopback_cause } | recovery { cause_recovery { all_recovery | udld | loopback_recovery | bpduguard | security-violation | psecure-violation | link-flap-recovery | storm-control | dcbx-no-ack | vpc-peerlink | failed-port-state } } } | no errdisable { detect cause_detect { all_cause | link-flap_cause | loopback_cause } | recovery { cause_recovery { all_recovery | udld | loopback_recovery | bpduguard | security-violation | psecure-violation | link-flap-recovery | storm-control | dcbx-no-ack | vpc-peerlink | failed-port-state } } }

Syntax Description

no

Negate a command or set its defaults

errdisable

Error disable

detect

Error disable detection

cause_detect

Enable error disable detection for application

all_cause

Enable error detection on all cases

link-flap_cause

Enable error disable detection on linkstate-flapping

loopback_cause

Enable error disable detection on loopback detected by UDLD

recovery

Error disable recovery

cause_recovery

Enable error disable recovery for application

all_recovery

Enable timer to recover from all causes

udld

Enable timer to recover from udld error disabled state

loopback_recovery

Enable timer to recover from loopback error disabled state detected by UDLD

bpduguard

Enable timer to recover from BPDU Guard error disable state

security-violation

Enable timer to recover from 802.1x violation disable state

psecure-violation

Enable timer to recover from psecure violation disable state

link-flap-recovery

Enable timer to recover from linkstate flapping

storm-control

Enable timer to recover from storm control error disabled state

dcbx-no-ack

Enable timer to recover from no DCBX Acks

vpc-peerlink

Enable timer to recover from inconsistent vpc peer-link

failed-port-state

Enable timer to recover from stp set port state failure

Command Mode

- /exec/configure

errdisable detect cause acl-exception

[no] errdisable detect cause acl-exception

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure

errdisable port detect cause acl-exception

[no] errdisable port detect cause acl-exception

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/if-ethernet /exec/configure/if-ethernet-switch

errdisable recovery interval

errdisable recovery interval <val> | no errdisable recovery interval [ <val> ]

Syntax Description

no

Negate a command or set its defaults

errdisable

Error disable

recovery

Error disable recovery

interval

Error disable recovery timer value

val

timer-interval (sec)

Command Mode

- /exec/configure

erspan-id

[no] erspan-id <flow_id>

Syntax Description

no

(Optional) Negate a command or set its defaults

erspan-id

Erspan ID for ERSPAN sessions

flow_id

erspan-id

Command Mode

- /exec/configure/monitor-erspan

ethanalyzer local

[no] ethanalyzer local [ { { {

Syntax Description

{

(Optional) inband

no

(Optional) Negate a command or set its defaults

ethanalyzer

Configure cisco packet analyzer

local

start local capture of frames to Sup

Command Mode

- /exec

ethernet-segment

[no] ethernet-segment <es-num>

Syntax Description

no

(Optional) Negate a command or set its defaults

ethernet-segment

Configure Ethernet-Segment

es-num

ethernet-segment number

Command Mode

- /exec/configure/if-eth-port-channel-switch

ethernet-segment delay-restore time

[no] ethernet-segment delay-restore time <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

ethernet-segment

ethernet-segment

delay-restore

delay-restore

time

time

sec

time in seconds

Command Mode

- /exec/configure/evpn-esi-mh

ethernet-tag encapsulation dot1q default static

{ ethernet-tag encapsulation dot1q default { static <profile-name> | dynamic } } | { no ethernet-tag encapsulation dot1q default }

Syntax Description

no

Negate a command or set its defaults

ethernet-tag

Data snooping triggers

encapsulation

Encapsulation/Trigger type

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

default

Default (wildcard). Match any dot1q when there is no specific dot1q mapping configured

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

ethernet-tag encapsulation dot1q static

{ ethernet-tag encapsulation dot1q <vlan-id> { static <profile-name> | dynamic } } | { no ethernet-tag encapsulation dot1q <vlan-id> }

Syntax Description

no

Negate a command or set its defaults

ethernet-tag

Data snooping triggers

encapsulation

Encapsulation/Trigger type

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

vlan-id

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

ethernet-tag encapsulation vni default static

{ ethernet-tag encapsulation vni default { static <profile-name> | dynamic } } | { no ethernet-tag encapsulation vni default }

Syntax Description

no

Negate a command or set its defaults

ethernet-tag

Data snooping triggers

encapsulation

Encapsulation/Trigger type

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

vni

Virtual Network Identifier

default

Default (wildcard). Match any vni when there is no specific vni mapping configured

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

ethernet-tag encapsulation vni static

{ ethernet-tag encapsulation vni <vni-id> { static <profile-name> | dynamic } } | { no ethernet-tag encapsulation vni <vni-id> }

Syntax Description

no

Negate a command or set its defaults

ethernet-tag

Data snooping triggers

encapsulation

Encapsulation/Trigger type

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

vni

Virtual Network Identifier

vni-id

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

evb batch-response disable

{ [ no ] evb batch-response disable }

Syntax Description

no

(Optional) Negate a command or set its defaults

evb

EVB (Edge Virtual Bridge)

batch-response

Disable batch-response

disable

Disable batch-response

Command Mode

- /exec/configure

evb mac

{ evb mac <mac-addr> } | { no evb mac [ <mac-addr> ] }

Syntax Description

no

Negate a command or set its defaults

evb

EVB (Edge Virtual Bridge)

mac

VDP multicast MAC address

mac-addr

MAC Address

Command Mode

- /exec/configure

evb reinit-keep-alive

{ evb reinit-keep-alive <exp> } | { no evb reinit-keep-alive [ <exp> ] }

Syntax Description

no

Negate a command or set its defaults

evb

EVB (Edge Virtual Bridge)

reinit-keep-alive

Keepalive

exp

Timer exponent. (Min 22 exp ~ 40 seconds)

Command Mode

- /exec/configure

evb resource-wait-delay

{ evb resource-wait-delay <exp> } | { no evb resource-wait-delay [ <exp> ] }

Syntax Description

no

Negate a command or set its defaults

evb

EVB (Edge Virtual Bridge)

resource-wait-delay

Resource wait delay

exp

Timer exponent. (Min 22 exp ~ 40 seconds)

Command Mode

- /exec/configure

event-history

[no] event-history { detail | periodic | objstore } [ size { <size_in_text> | <bytes> | disable } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event-history

Configure event-history details

detail

Detailed event history buffer

periodic

Periodic events history buffer

objstore

Objstore events history buffer

size

(Optional) Set the buffer size

disable

(Optional) Disable the buffer

size_in_text

(Optional) Buffer size

bytes

(Optional) Buffer size in bytes

Command Mode

- /exec/configure/router-bgp

event-history acllog category all

event-history acllog category all

Syntax Description

event-history

switch wide event history configuration

acllog

Configure acllog event logs

category

Configure acllog event logs for category

all

Configure acllog event logs for category all events

Command Mode

- /exec

event-history acllog category all

event-history acllog no category all

Syntax Description

event-history

switch wide event history configuration

acllog

Configure acllog event logs

no

Disable acllog event logs for category

category

Configure acllog event logs for category

all

Configure acllog event logs for category all events

Command Mode

- /exec

event-history acllog category fc2

event-history acllog category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

acllog

Configure acllog event logs

category

Configure acllog event logs for category

fc2

Configure acllog event logs for category FC2

rx

(Optional) Configure acllog event logs for FC2 Rx frames

brief

(Optional) Configure brief acllog event logs for FC2 Rx

detail

(Optional) Configure detail acllog event logs for FC2 Rx

tx

(Optional) Configure acllog event logs for FC2 Tx frames

brief1

(Optional) Configure brief acllog event logs for FC2 Tx

detail1

(Optional) Configure detail acllog event logs for FC2 Tx

Command Mode

- /exec

event-history acllog category fc2

event-history acllog no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

acllog

Configure acllog event logs

no

Disable acllog event logs for category

category

Configure acllog event logs for category

fc2

Configure acllog event logs for category FC2

rx

(Optional) Configure acllog event logs for FC2 Rx frames

brief

(Optional) Configure brief acllog event logs for FC2 Rx

detail

(Optional) Configure detail acllog event logs for FC2 Rx

tx

(Optional) Configure acllog event logs for FC2 Tx frames

brief1

(Optional) Configure brief acllog event logs for FC2 Tx

detail1

(Optional) Configure detail acllog event logs for FC2 Tx

Command Mode

- /exec

event-history acllog category mts

event-history acllog no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

acllog

Configure acllog event logs

no

Disable acllog event logs for category

category

Configure acllog event logs for category

mts

Configure acllog event logs for category mts

rx

(Optional) Configure acllog event logs for mts Rx frames

brief

(Optional) Configure brief acllog event logs for mts Rx

detail

(Optional) Configure detail acllog event logs for mts Rx

tx

(Optional) Configure acllog event logs for mts Tx frames

brief1

(Optional) Configure brief acllog event logs for mts Tx

detail1

(Optional) Configure detail acllog event logs for mts Tx

Command Mode

- /exec

event-history acllog category mts

event-history acllog category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

acllog

Configure acllog event logs

category

Configure acllog event logs for category

mts

Configure acllog event logs for category mts

rx

(Optional) Configure acllog event logs for mts Rx frames

brief

(Optional) Configure brief acllog event logs for mts Rx

detail

(Optional) Configure detail acllog event logs for mts Rx

tx

(Optional) Configure acllog event logs for mts Tx frames

brief1

(Optional) Configure brief acllog event logs for mts Tx

detail1

(Optional) Configure detail acllog event logs for mts Tx

Command Mode

- /exec

event-history adbm category all

event-history adbm category all

Syntax Description

event-history

switch wide event history configuration

adbm

Configure adbm event logs

category

Configure adbm event logs for category

all

Configure adbm event logs for category all events

Command Mode

- /exec

event-history adbm category all

event-history adbm no category all

Syntax Description

event-history

switch wide event history configuration

adbm

Configure adbm event logs

no

Disable adbm event logs for category

category

Configure adbm event logs for category

all

Configure adbm event logs for category all events

Command Mode

- /exec

event-history adbm category fc2

event-history adbm category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

adbm

Configure adbm event logs

category

Configure adbm event logs for category

fc2

Configure adbm event logs for category FC2

rx

(Optional) Configure adbm event logs for FC2 Rx frames

brief

(Optional) Configure brief adbm event logs for FC2 Rx

detail

(Optional) Configure detail adbm event logs for FC2 Rx

tx

(Optional) Configure adbm event logs for FC2 Tx frames

brief1

(Optional) Configure brief adbm event logs for FC2 Tx

detail1

(Optional) Configure detail adbm event logs for FC2 Tx

Command Mode

- /exec

event-history adbm category fc2

event-history adbm no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

adbm

Configure adbm event logs

no

Disable adbm event logs for category

category

Configure adbm event logs for category

fc2

Configure adbm event logs for category FC2

rx

(Optional) Configure adbm event logs for FC2 Rx frames

brief

(Optional) Configure brief adbm event logs for FC2 Rx

detail

(Optional) Configure detail adbm event logs for FC2 Rx

tx

(Optional) Configure adbm event logs for FC2 Tx frames

brief1

(Optional) Configure brief adbm event logs for FC2 Tx

detail1

(Optional) Configure detail adbm event logs for FC2 Tx

Command Mode

- /exec

event-history adbm category mts

event-history adbm category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

adbm

Configure adbm event logs

category

Configure adbm event logs for category

mts

Configure adbm event logs for category mts

rx

(Optional) Configure adbm event logs for mts Rx frames

brief

(Optional) Configure brief adbm event logs for mts Rx

detail

(Optional) Configure detail adbm event logs for mts Rx

tx

(Optional) Configure adbm event logs for mts Tx frames

brief1

(Optional) Configure brief adbm event logs for mts Tx

detail1

(Optional) Configure detail adbm event logs for mts Tx

Command Mode

- /exec

event-history adbm category mts

event-history adbm no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

adbm

Configure adbm event logs

no

Disable adbm event logs for category

category

Configure adbm event logs for category

mts

Configure adbm event logs for category mts

rx

(Optional) Configure adbm event logs for mts Rx frames

brief

(Optional) Configure brief adbm event logs for mts Rx

detail

(Optional) Configure detail adbm event logs for mts Rx

tx

(Optional) Configure adbm event logs for mts Tx frames

brief1

(Optional) Configure brief adbm event logs for mts Tx

detail1

(Optional) Configure detail adbm event logs for mts Tx

Command Mode

- /exec

event-history callhome

event-history callhome { mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] | no mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] }

Syntax Description

event-history

switch wide event history configuration

callhome

Configure Callhome event logs

mts

Configure callhome event logs for MTS

rx

(Optional) Configure callhome event logs for MTS Rx frames

brief

(Optional) Configure brief callhome event logs for MTS Rx

detail

(Optional) Configure detail callhome event logs for MTS Rx

tx

(Optional) Configure callhome event logs for MTS Tx frames

brief1

(Optional) Configure brief callhome event logs for MTS Tx

detail1

(Optional) Configure detail callhome event logs for MTS Tx

no

Disable callhome event logs for MTS

mts

Configure callhome event logs for MTS

rx

(Optional) Configure callhome event logs for MTS Rx frames

brief1

(Optional) Configure brief callhome event logs for MTS Rx

detail1

(Optional) Configure detail callhome event logs for MTS Rx

tx

(Optional) Configure callhome event logs for MTS Tx frames

brief2

(Optional) Configure brief callhome event logs for MTS Tx

detail2

(Optional) Configure detail callhome event logs for MTS Tx

Command Mode

- /exec

event-history capability

event-history capability { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

capability

Configure capability event logs

category

Configure capability event logs for category

all

Configure capability event logs for category all events

mts

Configure capability event logs for category mts

rx

(Optional) Configure capability event logs for mts Rx frames

brief

(Optional) Configure brief capability event logs for mts Rx

detail

(Optional) Configure detail capability event logs for mts Rx

tx

(Optional) Configure capability event logs for mts Tx frames

brief1

(Optional) Configure brief capability event logs for mts Tx

detail1

(Optional) Configure detail capability event logs for mts Tx

no

Disable capability event logs for category

category

Configure capability event logs for category

all

Configure capability event logs for category all events

mts

Configure capability event logs for category mts

rx

(Optional) Configure capability event logs for mts Rx frames

brief1

(Optional) Configure brief capability event logs for mts Rx

detail1

(Optional) Configure detail capability event logs for mts Rx

tx

(Optional) Configure capability event logs for mts Tx frames

brief2

(Optional) Configure brief capability event logs for mts Tx

detail2

(Optional) Configure detail capability event logs for mts Tx

Command Mode

- /exec

event-history cli

[no] event-history cli [ size { <size_in_text> | <bytes> | disable } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event-history

Configure event-history details

cli

CLI event history buffer

size

(Optional) Set the buffer size

disable

(Optional) Disable the buffer

size_in_text

(Optional) Buffer size

bytes

(Optional) Buffer size in bytes

Command Mode

- /exec/configure/router-bgp

event-history copp category all

event-history copp no category all

Syntax Description

event-history

switch wide event history configuration

copp

Configure copp event logs

no

Disable copp event logs for category

category

Configure copp event logs for category

all

Configure copp event logs for category all events

Command Mode

- /exec

event-history copp category all

event-history copp category all

Syntax Description

event-history

switch wide event history configuration

copp

Configure copp event logs

category

Configure copp event logs for category

all

Configure copp event logs for category all events

Command Mode

- /exec

event-history copp category fc2

event-history copp no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

copp

Configure copp event logs

no

Disable copp event logs for category

category

Configure copp event logs for category

fc2

Configure copp event logs for category FC2

rx

(Optional) Configure copp event logs for FC2 Rx frames

brief

(Optional) Configure brief copp event logs for FC2 Rx

detail

(Optional) Configure detail copp event logs for FC2 Rx

tx

(Optional) Configure copp event logs for FC2 Tx frames

brief1

(Optional) Configure brief copp event logs for FC2 Tx

detail1

(Optional) Configure detail copp event logs for FC2 Tx

Command Mode

- /exec

event-history copp category fc2

event-history copp category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

copp

Configure copp event logs

category

Configure copp event logs for category

fc2

Configure copp event logs for category FC2

rx

(Optional) Configure copp event logs for FC2 Rx frames

brief

(Optional) Configure brief copp event logs for FC2 Rx

detail

(Optional) Configure detail copp event logs for FC2 Rx

tx

(Optional) Configure copp event logs for FC2 Tx frames

brief1

(Optional) Configure brief copp event logs for FC2 Tx

detail1

(Optional) Configure detail copp event logs for FC2 Tx

Command Mode

- /exec

event-history copp category mts

event-history copp no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

copp

Configure copp event logs

no

Disable copp event logs for category

category

Configure copp event logs for category

mts

Configure copp event logs for category mts

rx

(Optional) Configure copp event logs for mts Rx frames

brief

(Optional) Configure brief copp event logs for mts Rx

detail

(Optional) Configure detail copp event logs for mts Rx

tx

(Optional) Configure copp event logs for mts Tx frames

brief1

(Optional) Configure brief copp event logs for mts Tx

detail1

(Optional) Configure detail copp event logs for mts Tx

Command Mode

- /exec

event-history copp category mts

event-history copp category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

copp

Configure copp event logs

category

Configure copp event logs for category

mts

Configure copp event logs for category mts

rx

(Optional) Configure copp event logs for mts Rx frames

brief

(Optional) Configure brief copp event logs for mts Rx

detail

(Optional) Configure detail copp event logs for mts Rx

tx

(Optional) Configure copp event logs for mts Tx frames

brief1

(Optional) Configure brief copp event logs for mts Tx

detail1

(Optional) Configure detail copp event logs for mts Tx

Command Mode

- /exec

event-history dot1x

event-history dot1x { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

dot1x

Configure dot1x event logs

category

Configure dot1x event logs for category

all

Configure dot1x event logs for category all events

mts

Configure dot1x event logs for category mts

rx

(Optional) Configure dot1x event logs for mts Rx frames

brief

(Optional) Configure brief dot1x event logs for mts Rx

detail

(Optional) Configure detail dot1x event logs for mts Rx

tx

(Optional) Configure dot1x event logs for mts Tx frames

brief1

(Optional) Configure brief dot1x event logs for mts Tx

detail1

(Optional) Configure detail dot1x event logs for mts Tx

no

Disable dot1x event logs for category

category

Configure dot1x event logs for category

all

Configure dot1x event logs for category all events

mts

Configure dot1x event logs for category mts

rx

(Optional) Configure dot1x event logs for mts Rx frames

brief1

(Optional) Configure brief dot1x event logs for mts Rx

detail1

(Optional) Configure detail dot1x event logs for mts Rx

tx

(Optional) Configure dot1x event logs for mts Tx frames

brief2

(Optional) Configure brief dot1x event logs for mts Tx

detail2

(Optional) Configure detail dot1x event logs for mts Tx

Command Mode

- /exec

event-history drap category all

event-history drap no category all

Syntax Description

event-history

switch wide event history configuration

drap

Configure drap event logs

no

Disable drap event logs for category

category

Configure drap event logs for category

all

Configure drap event logs for category all events

Command Mode

- /exec

event-history drap category all

event-history drap category all

Syntax Description

event-history

switch wide event history configuration

drap

Configure drap event logs

category

Configure drap event logs for category

all

Configure drap event logs for category all events

Command Mode

- /exec

event-history drap category mts

event-history drap no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

drap

Configure drap event logs

no

Disable drap event logs for category

category

Configure drap event logs for category

mts

Configure drap event logs for category mts

rx

(Optional) Configure drap event logs for mts Rx frames

brief

(Optional) Configure brief drap event logs for mts Rx

detail

(Optional) Configure detail drap event logs for mts Rx

tx

(Optional) Configure drap event logs for mts Tx frames

brief1

(Optional) Configure brief drap event logs for mts Tx

detail1

(Optional) Configure detail drap event logs for mts Tx

Command Mode

- /exec

event-history drap category mts

event-history drap category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

drap

Configure drap event logs

category

Configure drap event logs for category

mts

Configure drap event logs for category mts

rx

(Optional) Configure drap event logs for mts Rx frames

brief

(Optional) Configure brief drap event logs for mts Rx

detail

(Optional) Configure detail drap event logs for mts Rx

tx

(Optional) Configure drap event logs for mts Tx frames

brief1

(Optional) Configure brief drap event logs for mts Tx

detail1

(Optional) Configure detail drap event logs for mts Tx

Command Mode

- /exec

event-history eltm category all

event-history eltm no category all

Syntax Description

event-history

switch wide event history configuration

eltm

Configure eltm event logs

no

Disable eltm event logs for category

category

Configure eltm event logs for category

all

Configure eltm event logs for category all events

Command Mode

- /exec

event-history eltm category all

event-history eltm category all

Syntax Description

event-history

switch wide event history configuration

eltm

Configure eltm event logs

category

Configure eltm event logs for category

all

Configure eltm event logs for category all events

Command Mode

- /exec

event-history eltm category fc2

event-history eltm category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

eltm

Configure eltm event logs

category

Configure eltm event logs for category

fc2

Configure eltm event logs for category FC2

rx

(Optional) Configure eltm event logs for FC2 Rx frames

brief

(Optional) Configure brief eltm event logs for FC2 Rx

detail

(Optional) Configure detail eltm event logs for FC2 Rx

tx

(Optional) Configure eltm event logs for FC2 Tx frames

brief

(Optional) Configure brief eltm event logs for FC2 Tx

detail

(Optional) Configure detail eltm event logs for FC2 Tx

Command Mode

- /exec

event-history eltm category fc2

event-history eltm no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

eltm

Configure eltm event logs

no

Disable eltm event logs for category

category

Configure eltm event logs for category

fc2

Configure eltm event logs for category FC2

rx

(Optional) Configure eltm event logs for FC2 Rx frames

brief

(Optional) Configure brief eltm event logs for FC2 Rx

detail

(Optional) Configure detail eltm event logs for FC2 Rx

tx

(Optional) Configure eltm event logs for FC2 Tx frames

brief

(Optional) Configure brief eltm event logs for FC2 Tx

detail

(Optional) Configure detail eltm event logs for FC2 Tx

Command Mode

- /exec

event-history eltm category mts

event-history eltm category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

eltm

Configure eltm event logs

category

Configure eltm event logs for category

mts

Configure eltm event logs for category mts

rx

(Optional) Configure eltm event logs for mts Rx frames

brief

(Optional) Configure brief eltm event logs for mts Rx

detail

(Optional) Configure detail eltm event logs for mts Rx

tx

(Optional) Configure eltm event logs for mts Tx frames

brief

(Optional) Configure brief eltm event logs for mts Tx

detail

(Optional) Configure detail eltm event logs for mts Tx

Command Mode

- /exec

event-history eltm category mts

event-history eltm no category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

eltm

Configure eltm event logs

no

Disable eltm event logs for category

category

Configure eltm event logs for category

mts

Configure eltm event logs for category mts

rx

(Optional) Configure eltm event logs for mts Rx frames

brief

(Optional) Configure brief eltm event logs for mts Rx

detail

(Optional) Configure detail eltm event logs for mts Rx

tx

(Optional) Configure eltm event logs for mts Tx frames

brief

(Optional) Configure brief eltm event logs for mts Tx

detail

(Optional) Configure detail eltm event logs for mts Tx

Command Mode

- /exec

event-history errors

[no] event-history errors [ size { <size_in_text> | <bytes> | disable } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event-history

Configure event-history details

errors

Errors history buffer

size

(Optional) Set the buffer size

disable

(Optional) Disable the buffer

size_in_text

(Optional) Buffer size

bytes

(Optional) Buffer size in bytes

Command Mode

- /exec/configure/router-bgp

event-history ethpm

event-history ethpm { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

ethpm

Configure ethpm event logs

category

Configure ethpm event logs for category

all

Configure ethpm event logs for category all events

mts

Configure ethpm event logs for category mts

rx

(Optional) Configure ethpm event logs for mts Rx frames

brief

(Optional) Configure brief ethpm event logs for mts Rx

detail

(Optional) Configure detail ethpm event logs for mts Rx

tx

(Optional) Configure ethpm event logs for mts Tx frames

brief1

(Optional) Configure brief ethpm event logs for mts Tx

detail1

(Optional) Configure detail ethpm event logs for mts Tx

no

Disable ethpm event logs for category

category

Configure ethpm event logs for category

all

Configure ethpm event logs for category all events

mts

Configure ethpm event logs for category mts

rx

(Optional) Configure ethpm event logs for mts Rx frames

brief1

(Optional) Configure brief ethpm event logs for mts Rx

detail1

(Optional) Configure detail ethpm event logs for mts Rx

tx

(Optional) Configure ethpm event logs for mts Tx frames

brief2

(Optional) Configure brief ethpm event logs for mts Tx

detail2

(Optional) Configure detail ethpm event logs for mts Tx

Command Mode

- /exec

event-history events

[no] event-history events [ size { <size_in_text> | <bytes> | disable } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event-history

Configure event-history details

events

Events history buffer

size

(Optional) Set the buffer size

disable

(Optional) Disable the buffer

size_in_text

(Optional) Buffer size

bytes

(Optional) Buffer size in bytes

Command Mode

- /exec/configure/router-bgp

event-history exceptionlog

event-history exceptionlog { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

exceptionlog

Configure expl manager event logs

category

Configure exceptionlog manager event logs for category

all

Configure explog eventlogs for category all events

mts

Configure exceptionlog manager event logs for category mts

rx

(Optional) Configure exceptionlog manager event logs for mts Rx frames

brief

(Optional) Configure brief exceptionlog manager event logs for mts Rx

detail

(Optional) Configure detail exceptionlog manager event logs for mts Rx

tx

(Optional) Configure exceptionlog manager event logs for mts Tx frames

brief1

(Optional) Configure brief exceptionlog manager event logs for mts Tx

detail1

(Optional) Configure detail exceptionlog manager event logs for mts Tx

no

Disable exceptionlog manager event logs for category

category

Configure exceptionlog manager event logs for category

all

Configure explog eventlogs for category all events

mts

Configure exceptionlog manager event logs for category mts

rx

(Optional) Configure exceptionlog manager event logs for mts Rx frames

brief1

(Optional) Configure brief exceptionlog manager event logs for mts Rx

detail1

(Optional) Configure detail exceptionlog manager event logs for mts Rx

tx

(Optional) Configure exceptionlog manager event logs for mts Tx frames

brief2

(Optional) Configure brief exceptionlog manager event logs for mts Tx

detail2

(Optional) Configure detail exceptionlog manager event logs for mts Tx

Command Mode

- /exec

event-history fex category all

event-history fex category all

Syntax Description

event-history

switch wide event history configuration

fex

Configure FEX event logs

category

Configure FEX event logs for category

all

Configure FEX event logs for category all events

Command Mode

- /exec

event-history fex category all

event-history fex no category all

Syntax Description

event-history

switch wide event history configuration

fex

Configure FEX event logs

no

Disable FEX event logs for category

category

Configure FEX event logs for category

all

Configure FEX event logs for category all events

Command Mode

- /exec

event-history fex category fc2

event-history fex category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

fex

Configure FEX event logs

category

Configure FEX event logs for category

fc2

Configure FEX event logs for category FC2

rx

(Optional) Configure FEX event logs for FC2 Rx frames

brief

(Optional) Configure brief FEX event logs for FC2 Rx

detail

(Optional) Configure detail FEX event logs for FC2 Rx

tx

(Optional) Configure FEX event logs for FC2 Tx frames

brief1

(Optional) Configure brief FEX event logs for FC2 Tx

detail1

(Optional) Configure detail FEX event logs for FC2 Tx

Command Mode

- /exec

event-history fex category fc2

event-history fex no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

fex

Configure FEX event logs

no

Disable FEX event logs for category

category

Configure FEX event logs for category

fc2

Configure FEX event logs for category FC2

rx

(Optional) Configure FEX event logs for FC2 Rx frames

brief

(Optional) Configure brief FEX event logs for FC2 Rx

detail

(Optional) Configure detail FEX event logs for FC2 Rx

tx

(Optional) Configure FEX event logs for FC2 Tx frames

brief1

(Optional) Configure brief FEX event logs for FC2 Tx

detail1

(Optional) Configure detail FEX event logs for FC2 Tx

Command Mode

- /exec

event-history fex category mts

event-history fex no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

fex

Configure FEX event logs

no

Disable FEX event logs for category

category

Configure FEX event logs for category

mts

Configure FEX event logs for category mts

rx

(Optional) Configure FEX event logs for mts Rx frames

brief

(Optional) Configure brief FEX event logs for mts Rx

detail

(Optional) Configure detail FEX event logs for mts Rx

tx

(Optional) Configure FEX event logs for mts Tx frames

brief1

(Optional) Configure brief FEX event logs for mts Tx

detail1

(Optional) Configure detail FEX event logs for mts Tx

Command Mode

- /exec

event-history fex category mts

event-history fex category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

fex

Configure FEX event logs

category

Configure FEX event logs for category

mts

Configure FEX event logs for category mts

rx

(Optional) Configure FEX event logs for mts Rx frames

brief

(Optional) Configure brief FEX event logs for mts Rx

detail

(Optional) Configure detail FEX event logs for mts Rx

tx

(Optional) Configure FEX event logs for mts Tx frames

brief1

(Optional) Configure brief FEX event logs for mts Tx

detail1

(Optional) Configure detail FEX event logs for mts Tx

Command Mode

- /exec

event-history im category mts

event-history im no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

im

Configure im event logs

no

Disable im event logs for category

category

Configure im event logs for category

mts

Configure im event logs for category mts

rx

(Optional) Configure im event logs for mts Rx frames

brief

(Optional) Configure brief im event logs for mts Rx

detail

(Optional) Configure detail im event logs for mts Rx

tx

(Optional) Configure im event logs for mts Tx frames

brief1

(Optional) Configure brief im event logs for mts Tx

detail1

(Optional) Configure detail im event logs for mts Tx

Command Mode

- /exec

event-history imp category all

event-history imp no category all

Syntax Description

event-history

switch wide event history configuration

imp

Configure imp event logs

no

Disable imp event logs for category

category

Configure imp event logs for category

all

Configure imp event logs for category all events

Command Mode

- /exec

event-history imp category all

event-history imp category all

Syntax Description

event-history

switch wide event history configuration

imp

Configure imp event logs

category

Configure imp event logs for category

all

Configure imp event logs for category all events

Command Mode

- /exec

event-history imp category fc2

event-history imp no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

imp

Configure imp event logs

no

Disable imp event logs for category

category

Configure imp event logs for category

fc2

Configure imp event logs for category FC2

rx

(Optional) Configure imp event logs for FC2 Rx frames

brief

(Optional) Configure brief imp event logs for FC2 Rx

detail

(Optional) Configure detail imp event logs for FC2 Rx

tx

(Optional) Configure imp event logs for FC2 Tx frames

brief1

(Optional) Configure brief imp event logs for FC2 Tx

detail1

(Optional) Configure detail imp event logs for FC2 Tx

Command Mode

- /exec

event-history imp category fc2

event-history imp category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

imp

Configure imp event logs

category

Configure imp event logs for category

fc2

Configure imp event logs for category FC2

rx

(Optional) Configure imp event logs for FC2 Rx frames

brief

(Optional) Configure brief imp event logs for FC2 Rx

detail

(Optional) Configure detail imp event logs for FC2 Rx

tx

(Optional) Configure imp event logs for FC2 Tx frames

brief1

(Optional) Configure brief imp event logs for FC2 Tx

detail1

(Optional) Configure detail imp event logs for FC2 Tx

Command Mode

- /exec

event-history imp category mts

event-history imp no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

imp

Configure imp event logs

no

Disable imp event logs for category

category

Configure imp event logs for category

mts

Configure imp event logs for category mts

rx

(Optional) Configure imp event logs for mts Rx frames

brief

(Optional) Configure brief imp event logs for mts Rx

detail

(Optional) Configure detail imp event logs for mts Rx

tx

(Optional) Configure imp event logs for mts Tx frames

brief1

(Optional) Configure brief imp event logs for mts Tx

detail1

(Optional) Configure detail imp event logs for mts Tx

Command Mode

- /exec

event-history imp category mts

event-history imp category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

imp

Configure imp event logs

category

Configure imp event logs for category

mts

Configure imp event logs for category mts

rx

(Optional) Configure imp event logs for mts Rx frames

brief

(Optional) Configure brief imp event logs for mts Rx

detail

(Optional) Configure detail imp event logs for mts Rx

tx

(Optional) Configure imp event logs for mts Tx frames

brief1

(Optional) Configure brief imp event logs for mts Tx

detail1

(Optional) Configure detail imp event logs for mts Tx

Command Mode

- /exec

event-history interface vlan category all

event-history interface vlan [ no ] category all

Syntax Description

event-history

switch wide event history configuration

interface

Configure interfaces

vlan

Configure interface vlan event logs

no

(Optional) Disable interface vlan logs for category

category

Configure interface vlan event logs for category

all

Configure interface vlan event logs for category all events

Command Mode

- /exec

event-history interface vlan category mts

event-history interface vlan [ no ] category mts [ rx [ { brief | detail } ] ]

Syntax Description

event-history

switch wide event history configuration

interface

Configure interfaces

vlan

Configure interface vlan event logs

no

(Optional) Disable interface vlan logs for category

category

Configure interface vlan event logs for category

mts

Configure interface vlan event logs for category mts

rx

(Optional) Configure interface vlan event logs for mts Rx frames

brief

(Optional) Configure brief interface vlan event logs for mts Rx

detail

(Optional) Configure detail interface vlan event logs for mts Rx

Command Mode

- /exec

event-history interface vlan category mts

event-history interface vlan [ no ] category mts [ tx [ { brief | detail } ] ]

Syntax Description

event-history

switch wide event history configuration

interface

Configure interfaces

vlan

Configure interface vlan event logs

no

(Optional) Disable interface vlan logs for category

category

Configure interface vlan event logs for category

mts

Configure interface vlan event logs for category mts

tx

(Optional) Configure interface vlan event logs for mts Tx frames

brief

(Optional) Configure brief interface vlan event logs for mts Tx

detail

(Optional) Configure detail interface vlan event logs for mts Tx

Command Mode

- /exec

event-history keystore

event-history { keystore | sksd } { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

keystore

Configure keystore event logs

sksd

Configure keystore/sksd event logs

category

Configure keystore event logs for category

all

Configure keystore event logs for category all events

mts

Configure keystore event logs for category mts

rx

(Optional) Configure keystore event logs for mts Rx frames

brief

(Optional) Configure brief keystore event logs for mts Rx

detail

(Optional) Configure detail keystore event logs for mts Rx

tx

(Optional) Configure keystore event logs for mts Tx frames

brief1

(Optional) Configure brief keystore event logs for mts Tx

detail1

(Optional) Configure detail keystore event logs for mts Tx

no

Disable keystore event logs for category

category

Configure keystore event logs for category

all

Configure keystore event logs for category all events

mts

Configure keystore event logs for category mts

rx

(Optional) Configure keystore event logs for mts Rx frames

brief1

(Optional) Configure brief keystore event logs for mts Rx

detail1

(Optional) Configure detail keystore event logs for mts Rx

tx

(Optional) Configure keystore event logs for mts Tx frames

brief2

(Optional) Configure brief keystore event logs for mts Tx

detail2

(Optional) Configure detail keystore event logs for mts Tx

Command Mode

- /exec

event-history lacp category all

event-history lacp category all

Syntax Description

event-history

switch wide event history configuration

lacp

Configure lacp event logs

category

Configure lacp event logs for category

all

Configure lacp event logs for category all events

Command Mode

- /exec

event-history lacp category all

event-history lacp no category all

Syntax Description

event-history

switch wide event history configuration

lacp

Configure lacp event logs

no

Disable lacp event logs for category

category

Configure lacp event logs for category

all

Configure lacp event logs for category all events

Command Mode

- /exec

event-history lacp category fc2

event-history lacp category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lacp

Configure lacp event logs

category

Configure lacp event logs for category

fc2

Configure lacp event logs for category FC2

rx

(Optional) Configure lacp event logs for FC2 Rx frames

brief

(Optional) Configure brief lacp event logs for FC2 Rx

detail

(Optional) Configure detail lacp event logs for FC2 Rx

tx

(Optional) Configure lacp event logs for FC2 Tx frames

brief1

(Optional) Configure brief lacp event logs for FC2 Tx

detail1

(Optional) Configure detail lacp event logs for FC2 Tx

Command Mode

- /exec

event-history lacp category fc2

event-history lacp no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lacp

Configure lacp event logs

no

Disable lacp event logs for category

category

Configure lacp event logs for category

fc2

Configure lacp event logs for category FC2

rx

(Optional) Configure lacp event logs for FC2 Rx frames

brief

(Optional) Configure brief lacp event logs for FC2 Rx

detail

(Optional) Configure detail lacp event logs for FC2 Rx

tx

(Optional) Configure lacp event logs for FC2 Tx frames

brief1

(Optional) Configure brief lacp event logs for FC2 Tx

detail1

(Optional) Configure detail lacp event logs for FC2 Tx

Command Mode

- /exec

event-history lacp category mts

event-history lacp no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lacp

Configure lacp event logs

no

Disable lacp event logs for category

category

Configure lacp event logs for category

mts

Configure lacp event logs for category mts

rx

(Optional) Configure lacp event logs for mts Rx frames

brief

(Optional) Configure brief lacp event logs for mts Rx

detail

(Optional) Configure detail lacp event logs for mts Rx

tx

(Optional) Configure lacp event logs for mts Tx frames

brief1

(Optional) Configure brief lacp event logs for mts Tx

detail1

(Optional) Configure detail lacp event logs for mts Tx

Command Mode

- /exec

event-history lacp category mts

event-history lacp category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lacp

Configure lacp event logs

category

Configure lacp event logs for category

mts

Configure lacp event logs for category mts

rx

(Optional) Configure lacp event logs for mts Rx frames

brief

(Optional) Configure brief lacp event logs for mts Rx

detail

(Optional) Configure detail lacp event logs for mts Rx

tx

(Optional) Configure lacp event logs for mts Tx frames

brief1

(Optional) Configure brief lacp event logs for mts Tx

detail1

(Optional) Configure detail lacp event logs for mts Tx

Command Mode

- /exec

event-history license

event-history license { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

license

Configure license manager event logs

category

Configure license manager event logs for category

all

Configure license manager event logs for category all events

mts

Configure license manager event logs for category mts

rx

(Optional) Configure license manager event logs for mts Rx frames

brief

(Optional) Configure brief license manager event logs for mts Rx

detail

(Optional) Configure detail license manager event logs for mts Rx

tx

(Optional) Configure license manager event logs for mts Tx frames

brief1

(Optional) Configure brief license manager event logs for mts Tx

detail1

(Optional) Configure detail license manager event logs for mts Tx

no

Disable license manager event logs for category

category

Configure license manager event logs for category

all

Configure license manager event logs for category all events

mts

Configure license manager event logs for category mts

rx

(Optional) Configure license manager event logs for mts Rx frames

brief1

(Optional) Configure brief license manager event logs for mts Rx

detail1

(Optional) Configure detail license manager event logs for mts Rx

tx

(Optional) Configure license manager event logs for mts Tx frames

brief2

(Optional) Configure brief license manager event logs for mts Tx

detail2

(Optional) Configure detail license manager event logs for mts Tx

Command Mode

- /exec

event-history lldp category all

event-history lldp no category all

Syntax Description

event-history

switch wide event history configuration

lldp

Configure lldp event logs

no

Disable lldp event logs for category

category

Configure lldp event logs for category

all

Configure lldp event logs for category all events

Command Mode

- /exec

event-history lldp category all

event-history lldp category all

Syntax Description

event-history

switch wide event history configuration

lldp

Configure lldp event logs

category

Configure lldp event logs for category

all

Configure lldp event logs for category all events

Command Mode

- /exec

event-history lldp category fc2

event-history lldp category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lldp

Configure lldp event logs

category

Configure lldp event logs for category

fc2

Configure lldp event logs for category FC2

rx

(Optional) Configure lldp event logs for FC2 Rx frames

brief

(Optional) Configure brief lldp event logs for FC2 Rx

detail

(Optional) Configure detail lldp event logs for FC2 Rx

tx

(Optional) Configure lldp event logs for FC2 Tx frames

brief1

(Optional) Configure brief lldp event logs for FC2 Tx

detail1

(Optional) Configure detail lldp event logs for FC2 Tx

Command Mode

- /exec

event-history lldp category fc2

event-history lldp no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lldp

Configure lldp event logs

no

Disable lldp event logs for category

category

Configure lldp event logs for category

fc2

Configure lldp event logs for category FC2

rx

(Optional) Configure lldp event logs for FC2 Rx frames

brief

(Optional) Configure brief lldp event logs for FC2 Rx

detail

(Optional) Configure detail lldp event logs for FC2 Rx

tx

(Optional) Configure lldp event logs for FC2 Tx frames

brief1

(Optional) Configure brief lldp event logs for FC2 Tx

detail1

(Optional) Configure detail lldp event logs for FC2 Tx

Command Mode

- /exec

event-history lldp category mts

event-history lldp category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lldp

Configure lldp event logs

category

Configure lldp event logs for category

mts

Configure lldp event logs for category mts

rx

(Optional) Configure lldp event logs for mts Rx frames

brief

(Optional) Configure brief lldp event logs for mts Rx

detail

(Optional) Configure detail lldp event logs for mts Rx

tx

(Optional) Configure lldp event logs for mts Tx frames

brief1

(Optional) Configure brief lldp event logs for mts Tx

detail1

(Optional) Configure detail lldp event logs for mts Tx

Command Mode

- /exec

event-history lldp category mts

event-history lldp no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

lldp

Configure lldp event logs

no

Disable lldp event logs for category

category

Configure lldp event logs for category

mts

Configure lldp event logs for category mts

rx

(Optional) Configure lldp event logs for mts Rx frames

brief

(Optional) Configure brief lldp event logs for mts Rx

detail

(Optional) Configure detail lldp event logs for mts Rx

tx

(Optional) Configure lldp event logs for mts Tx frames

brief1

(Optional) Configure brief lldp event logs for mts Tx

detail1

(Optional) Configure detail lldp event logs for mts Tx

Command Mode

- /exec

event-history m2rib category all

event-history m2rib category all

Syntax Description

event-history

switch wide event history configuration

m2rib

Configure m2rib event logs

category

Configure m2rib event logs for category

all

Configure m2rib event logs for category all events

Command Mode

- /exec

event-history mfdm category all

event-history mfdm no category all

Syntax Description

event-history

switch wide event history configuration

mfdm

Configure mfdm event logs

no

Disable mfdm event logs for category

category

Configure mfdm event logs for category

all

Configure mfdm event logs for category all events

Command Mode

- /exec

event-history mfdm category all

event-history mfdm category all

Syntax Description

event-history

switch wide event history configuration

mfdm

Configure mfdm event logs

category

Configure mfdm event logs for category

all

Configure mfdm event logs for category all events

Command Mode

- /exec

event-history mfdm category fc2

event-history mfdm category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

mfdm

Configure mfdm event logs

category

Configure mfdm event logs for category

fc2

Configure mfdm event logs for category FC2

rx

(Optional) Configure mfdm event logs for FC2 Rx frames

brief

(Optional) Configure brief mfdm event logs for FC2 Rx

detail

(Optional) Configure detail mfdm event logs for FC2 Rx

tx

(Optional) Configure mfdm event logs for FC2 Tx frames

brief

(Optional) Configure brief mfdm event logs for FC2 Tx

detail

(Optional) Configure detail mfdm event logs for FC2 Tx

Command Mode

- /exec

event-history mfdm category fc2

event-history mfdm no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

mfdm

Configure mfdm event logs

no

Disable mfdm event logs for category

category

Configure mfdm event logs for category

fc2

Configure mfdm event logs for category FC2

rx

(Optional) Configure mfdm event logs for FC2 Rx frames

brief

(Optional) Configure brief mfdm event logs for FC2 Rx

detail

(Optional) Configure detail mfdm event logs for FC2 Rx

tx

(Optional) Configure mfdm event logs for FC2 Tx frames

brief

(Optional) Configure brief mfdm event logs for FC2 Tx

detail

(Optional) Configure detail mfdm event logs for FC2 Tx

Command Mode

- /exec

event-history mfdm category mts

event-history mfdm category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

mfdm

Configure mfdm event logs

category

Configure mfdm event logs for category

mts

Configure mfdm event logs for category mts

rx

(Optional) Configure mfdm event logs for mts Rx frames

brief

(Optional) Configure brief mfdm event logs for mts Rx

detail

(Optional) Configure detail mfdm event logs for mts Rx

tx

(Optional) Configure mfdm event logs for mts Tx frames

brief

(Optional) Configure brief mfdm event logs for mts Tx

detail

(Optional) Configure detail mfdm event logs for mts Tx

Command Mode

- /exec

event-history mfdm category mts

event-history mfdm no category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

mfdm

Configure mfdm event logs

no

Disable mfdm event logs for category

category

Configure mfdm event logs for category

mts

Configure mfdm event logs for category mts

rx

(Optional) Configure mfdm event logs for mts Rx frames

brief

(Optional) Configure brief mfdm event logs for mts Rx

detail

(Optional) Configure detail mfdm event logs for mts Rx

tx

(Optional) Configure mfdm event logs for mts Tx frames

brief

(Optional) Configure brief mfdm event logs for mts Tx

detail

(Optional) Configure detail mfdm event logs for mts Tx

Command Mode

- /exec

event-history mmode category all

event-history mmode [ no ] category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] }

Syntax Description

event-history

switch wide event history configuration

mmode

Configure mmode event logs

no

(Optional) Disable mmode event logs for category

category

Configure mmode event logs for category

all

Configure mmode event logs for category all events

mts

Configure mmode event logs for category mts

rx

(Optional) Configure mmode event logs for mts Rx frames

brief

(Optional) Configure brief mmode event logs for mts Rx

detail

(Optional) Configure detail mmode event logs for mts Rx

tx

(Optional) Configure mmode event logs for mts Tx frames

brief1

(Optional) Configure brief mmode event logs for mts Tx

detail1

(Optional) Configure detail mmode event logs for mts Tx

Command Mode

- /exec

event-history module

event-history module { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

module

Configure module event logs

category

Configure module event logs for category

all

Configure module event logs for category all events

mts

Configure module event logs for category mts

rx

(Optional) Configure module event logs for mts Rx frames

brief

(Optional) Configure brief module event logs for mts Rx

detail

(Optional) Configure detail module event logs for mts Rx

tx

(Optional) Configure module event logs for mts Tx frames

brief1

(Optional) Configure brief module event logs for mts Tx

detail1

(Optional) Configure detail module event logs for mts Tx

no

Disable module event logs for category

category

Configure module event logs for category

all

Configure module event logs for category all events

mts

Configure module event logs for category mts

rx

(Optional) Configure module event logs for mts Rx frames

brief1

(Optional) Configure brief module event logs for mts Rx

detail1

(Optional) Configure detail module event logs for mts Rx

tx

(Optional) Configure module event logs for mts Tx frames

brief2

(Optional) Configure brief module event logs for mts Tx

detail2

(Optional) Configure detail module event logs for mts Tx

Command Mode

- /exec

event-history pfstat category all

event-history pfstat no category all

Syntax Description

event-history

switch wide event history configuration

pfstat

Configure pfstat event logs

no

Disable pfstat event logs for category

category

Configure pfstat event logs for category

all

Configure pfstat event logs for category all events

Command Mode

- /exec

event-history pfstat category all

event-history pfstat category all

Syntax Description

event-history

switch wide event history configuration

pfstat

Configure pfstat event logs

category

Configure pfstat event logs for category

all

Configure pfstat event logs for category all events

Command Mode

- /exec

event-history pfstat category fc2

event-history pfstat category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

pfstat

Configure pfstat event logs

category

Configure pfstat event logs for category

fc2

Configure pfstat event logs for category FC2

rx

(Optional) Configure pfstat event logs for FC2 Rx frames

brief

(Optional) Configure brief pfstat event logs for FC2 Rx

detail

(Optional) Configure detail pfstat event logs for FC2 Rx

tx

(Optional) Configure pfstat event logs for FC2 Tx frames

brief

(Optional) Configure brief pfstat event logs for FC2 Tx

detail

(Optional) Configure detail pfstat event logs for FC2 Tx

Command Mode

- /exec

event-history pfstat category fc2

event-history pfstat no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

pfstat

Configure pfstat event logs

no

Disable pfstat event logs for category

category

Configure pfstat event logs for category

fc2

Configure pfstat event logs for category FC2

rx

(Optional) Configure pfstat event logs for FC2 Rx frames

brief

(Optional) Configure brief pfstat event logs for FC2 Rx

detail

(Optional) Configure detail pfstat event logs for FC2 Rx

tx

(Optional) Configure pfstat event logs for FC2 Tx frames

brief

(Optional) Configure brief pfstat event logs for FC2 Tx

detail

(Optional) Configure detail pfstat event logs for FC2 Tx

Command Mode

- /exec

event-history pfstat category mts

event-history pfstat category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

pfstat

Configure pfstat event logs

category

Configure pfstat event logs for category

mts

Configure pfstat event logs for category mts

rx

(Optional) Configure pfstat event logs for mts Rx frames

brief

(Optional) Configure brief pfstat event logs for mts Rx

detail

(Optional) Configure detail pfstat event logs for mts Rx

tx

(Optional) Configure pfstat event logs for mts Tx frames

brief

(Optional) Configure brief pfstat event logs for mts Tx

detail

(Optional) Configure detail pfstat event logs for mts Tx

Command Mode

- /exec

event-history pfstat category mts

event-history pfstat no category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

pfstat

Configure pfstat event logs

no

Disable pfstat event logs for category

category

Configure pfstat event logs for category

mts

Configure pfstat event logs for category mts

rx

(Optional) Configure pfstat event logs for mts Rx frames

brief

(Optional) Configure brief pfstat event logs for mts Rx

detail

(Optional) Configure detail pfstat event logs for mts Rx

tx

(Optional) Configure pfstat event logs for mts Tx frames

brief

(Optional) Configure brief pfstat event logs for mts Tx

detail

(Optional) Configure detail pfstat event logs for mts Tx

Command Mode

- /exec

event-history platform buffer-size

event-history platform buffer-size <i0>

Syntax Description

event-history

switch wide event history configuration

platform

Configure platform event logs

buffer-size

Configure platform event logs buffer size

i0

please enter buffer size

Command Mode

- /exec

event-history platform category all

event-history platform no category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] }

Syntax Description

event-history

switch wide event history configuration

platform

Configure platform event logs

no

Disable platform event logs for category

category

Configure platform event logs for category

all

Configure platform event logs for category all events

mts

Configure platform event logs for category mts

rx

(Optional) Configure platform event logs for mts Rx frames

brief

(Optional) Configure brief platform event logs for mts Rx

detail

(Optional) Configure detail platform event logs for mts Rx

tx

(Optional) Configure platform event logs for mts Tx frames

brief1

(Optional) Configure brief platform event logs for mts Tx

detail1

(Optional) Configure detail platform event logs for mts Tx

Command Mode

- /exec

event-history platform category all

event-history platform category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] }

Syntax Description

event-history

switch wide event history configuration

platform

Configure platform event logs

category

Configure platform event logs for category

all

Configure platform event logs for category all events

mts

Configure platform event logs for category mts

rx

(Optional) Configure platform event logs for mts Rx frames

brief

(Optional) Configure brief platform event logs for mts Rx

detail

(Optional) Configure detail platform event logs for mts Rx

tx

(Optional) Configure platform event logs for mts Tx frames

brief1

(Optional) Configure brief platform event logs for mts Tx

detail1

(Optional) Configure detail platform event logs for mts Tx

Command Mode

- /exec

event-history pltfm_config category all

event-history pltfm_config no category all

Syntax Description

event-history

switch wide event history configuration

pltfm_config

Configure pltfm_config event logs

no

Disable pltfm_config event logs for category

category

Configure pltfm_config event logs for category

all

Configure pltfm_config event logs for category all events

Command Mode

- /exec

event-history pltfm_config category all

event-history pltfm_config category all

Syntax Description

event-history

switch wide event history configuration

pltfm_config

Configure pltfm_config event logs

category

Configure pltfm_config event logs for category

all

Configure pltfm_config event logs for category all events

Command Mode

- /exec

event-history pltfm_config category fc2

event-history pltfm_config no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

pltfm_config

Configure pltfm_config event logs

no

Disable pltfm_config event logs for category

category

Configure pltfm_config event logs for category

fc2

Configure pltfm_config event logs for category FC2

rx

(Optional) Configure pltfm_config event logs for FC2 Rx frames

brief

(Optional) Configure brief pltfm_config event logs for FC2 Rx

detail

(Optional) Configure detail pltfm_config event logs for FC2 Rx

tx

(Optional) Configure pltfm_config event logs for FC2 Tx frames

brief1

(Optional) Configure brief pltfm_config event logs for FC2 Tx

detail1

(Optional) Configure detail pltfm_config event logs for FC2 Tx

Command Mode

- /exec

event-history pltfm_config category fc2

event-history pltfm_config category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

pltfm_config

Configure pltfm_config event logs

category

Configure pltfm_config event logs for category

fc2

Configure pltfm_config event logs for category FC2

rx

(Optional) Configure pltfm_config event logs for FC2 Rx frames

brief

(Optional) Configure brief pltfm_config event logs for FC2 Rx

detail

(Optional) Configure detail pltfm_config event logs for FC2 Rx

tx

(Optional) Configure pltfm_config event logs for FC2 Tx frames

brief1

(Optional) Configure brief pltfm_config event logs for FC2 Tx

detail1

(Optional) Configure detail pltfm_config event logs for FC2 Tx

Command Mode

- /exec

event-history pltfm_config category mts

event-history pltfm_config category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

pltfm_config

Configure pltfm_config event logs

category

Configure pltfm_config event logs for category

mts

Configure pltfm_config event logs for category mts

rx

(Optional) Configure pltfm_config event logs for mts Rx frames

brief

(Optional) Configure brief pltfm_config event logs for mts Rx

detail

(Optional) Configure detail pltfm_config event logs for mts Rx

tx

(Optional) Configure pltfm_config event logs for mts Tx frames

brief1

(Optional) Configure brief pltfm_config event logs for mts Tx

detail1

(Optional) Configure detail pltfm_config event logs for mts Tx

Command Mode

- /exec

event-history pltfm_config category mts

event-history pltfm_config no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

pltfm_config

Configure pltfm_config event logs

no

Disable pltfm_config event logs for category

category

Configure pltfm_config event logs for category

mts

Configure pltfm_config event logs for category mts

rx

(Optional) Configure pltfm_config event logs for mts Rx frames

brief

(Optional) Configure brief pltfm_config event logs for mts Rx

detail

(Optional) Configure detail pltfm_config event logs for mts Rx

tx

(Optional) Configure pltfm_config event logs for mts Tx frames

brief1

(Optional) Configure brief pltfm_config event logs for mts Tx

detail1

(Optional) Configure detail pltfm_config event logs for mts Tx

Command Mode

- /exec

event-history plugin

event-history plugin { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ] } | no category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

plugin

Configure plugin event logs

category

Configure plugin event logs for category

all

Configure plugin event logs for category all events

mts

Configure plugin event logs for category mts

rx

(Optional) Configure plugin event logs for mts Rx frames

brief

(Optional) Configure brief plugin event logs for mts Rx

detail

(Optional) Configure detail plugin event logs for mts Rx

tx

(Optional) Configure plugin event logs for mts Tx frames

brief

(Optional) Configure brief plugin event logs for mts Tx

detail

(Optional) Configure detail plugin event logs for mts Tx

no

Disable plugin event logs for category

category

Configure plugin event logs for category

all

Configure plugin event logs for category all events

mts

Configure plugin event logs for category mts

rx

(Optional) Configure plugin event logs for mts Rx frames

brief

(Optional) Configure brief plugin event logs for mts Rx

detail

(Optional) Configure detail plugin event logs for mts Rx

tx

(Optional) Configure plugin event logs for mts Tx frames

brief

(Optional) Configure brief plugin event logs for mts Tx

detail

(Optional) Configure detail plugin event logs for mts Tx

Command Mode

- /exec

event-history poap category all

event-history poap category all

Syntax Description

event-history

switch wide event history configuration

poap

Configure poap event logs

category

Configure poap event logs for category

all

Configure poap event logs for category all events

Command Mode

- /exec

event-history poap category all

event-history poap no category all

Syntax Description

event-history

switch wide event history configuration

poap

Configure poap event logs

no

Disable poap event logs for category

category

Configure poap event logs for category

all

Configure poap event logs for category all events

Command Mode

- /exec

event-history poap category fc2

event-history poap category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

poap

Configure poap event logs

category

Configure poap event logs for category

fc2

Configure poap event logs for category FC2

rx

(Optional) Configure poap event logs for FC2 Rx frames

brief

(Optional) Configure brief poap event logs for FC2 Rx

detail

(Optional) Configure detail poap event logs for FC2 Rx

tx

(Optional) Configure poap event logs for FC2 Tx frames

brief1

(Optional) Configure brief poap event logs for FC2 Tx

detail1

(Optional) Configure detail poap event logs for FC2 Tx

Command Mode

- /exec

event-history poap category fc2

event-history poap no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

poap

Configure poap event logs

no

Disable poap event logs for category

category

Configure poap event logs for category

fc2

Configure poap event logs for category FC2

rx

(Optional) Configure poap event logs for FC2 Rx frames

brief

(Optional) Configure brief poap event logs for FC2 Rx

detail

(Optional) Configure detail poap event logs for FC2 Rx

tx

(Optional) Configure poap event logs for FC2 Tx frames

brief1

(Optional) Configure brief poap event logs for FC2 Tx

detail1

(Optional) Configure detail poap event logs for FC2 Tx

Command Mode

- /exec

event-history poap category mts

event-history poap category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

poap

Configure poap event logs

category

Configure poap event logs for category

mts

Configure poap event logs for category mts

rx

(Optional) Configure poap event logs for mts Rx frames

brief

(Optional) Configure brief poap event logs for mts Rx

detail

(Optional) Configure detail poap event logs for mts Rx

tx

(Optional) Configure poap event logs for mts Tx frames

brief1

(Optional) Configure brief poap event logs for mts Tx

detail1

(Optional) Configure detail poap event logs for mts Tx

Command Mode

- /exec

event-history poap category mts

event-history poap no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

poap

Configure poap event logs

no

Disable poap event logs for category

category

Configure poap event logs for category

mts

Configure poap event logs for category mts

rx

(Optional) Configure poap event logs for mts Rx frames

brief

(Optional) Configure brief poap event logs for mts Rx

detail

(Optional) Configure detail poap event logs for mts Rx

tx

(Optional) Configure poap event logs for mts Tx frames

brief1

(Optional) Configure brief poap event logs for mts Tx

detail1

(Optional) Configure detail poap event logs for mts Tx

Command Mode

- /exec

event-history port-profile category all

event-history port-profile [ no ] category all

Syntax Description

event-history

switch wide event history configuration

port-profile

Configure port-profile event logs

category

Configure port-profile event logs for category

no

(Optional) Disable port-profile event logs for category

all

Configure port-profile event logs for category all events

Command Mode

- /exec

event-history port-profile category mts

event-history port-profile [ no ] category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

port-profile

Configure port-profile event logs

no

(Optional) Disable port-profile event logs for category

category

Configure port-profile event logs for category

mts

Configure port-profile event logs for category mts

rx

(Optional) Configure port-profile event logs for mts Rx frames

brief

(Optional) Configure brief port-profile event logs for mts Rx

detail

(Optional) Configure detail port-profile event logs for mts Rx

tx

(Optional) Configure port-profile event logs for mts Tx frames

brief1

(Optional) Configure brief port-profile event logs for mts Tx

detail1

(Optional) Configure detail port-profile event logs for mts Tx

Command Mode

- /exec

event-history port-security category all

event-history port-security category all

Syntax Description

event-history

switch wide event history configuration

port-security

Configure port-security event logs

category

Configure port-security event logs for category

all

Configure port-security event logs for category all events

Command Mode

- /exec

event-history port-security category all

event-history port-security no category all

Syntax Description

event-history

switch wide event history configuration

port-security

Configure port-security event logs

no

Disable port-security event logs for category

category

Configure port-security event logs for category

all

Configure port-security event logs for category all events

Command Mode

- /exec

event-history port-security category fc2

event-history port-security category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

port-security

Configure port-security event logs

category

Configure port-security event logs for category

fc2

Configure port-security event logs for category FC2

rx

(Optional) Configure port-security event logs for FC2 Rx frames

brief

(Optional) Configure brief port-security event logs for FC2 Rx

detail

(Optional) Configure detail port-security event logs for FC2 Rx

tx

(Optional) Configure port-security event logs for FC2 Tx frames

brief1

(Optional) Configure brief port-security event logs for FC2 Tx

detail1

(Optional) Configure detail port-security event logs for FC2 Tx

Command Mode

- /exec

event-history port-security category fc2

event-history port-security no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

port-security

Configure port-security event logs

no

Disable port-security event logs for category

category

Configure port-security event logs for category

fc2

Configure port-security event logs for category FC2

rx

(Optional) Configure port-security event logs for FC2 Rx frames

brief

(Optional) Configure brief port-security event logs for FC2 Rx

detail

(Optional) Configure detail port-security event logs for FC2 Rx

tx

(Optional) Configure port-security event logs for FC2 Tx frames

brief1

(Optional) Configure brief port-security event logs for FC2 Tx

detail1

(Optional) Configure detail port-security event logs for FC2 Tx

Command Mode

- /exec

event-history port-security category mts

event-history port-security no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

port-security

Configure port-security event logs

no

Disable port-security event logs for category

category

Configure port-security event logs for category

mts

Configure port-security event logs for category mts

rx

(Optional) Configure port-security event logs for mts Rx frames

brief

(Optional) Configure brief port-security event logs for mts Rx

detail

(Optional) Configure detail port-security event logs for mts Rx

tx

(Optional) Configure port-security event logs for mts Tx frames

brief1

(Optional) Configure brief port-security event logs for mts Tx

detail1

(Optional) Configure detail port-security event logs for mts Tx

Command Mode

- /exec

event-history port-security category mts

event-history port-security category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

port-security

Configure port-security event logs

category

Configure port-security event logs for category

mts

Configure port-security event logs for category mts

rx

(Optional) Configure port-security event logs for mts Rx frames

brief

(Optional) Configure brief port-security event logs for mts Rx

detail

(Optional) Configure detail port-security event logs for mts Rx

tx

(Optional) Configure port-security event logs for mts Tx frames

brief1

(Optional) Configure brief port-security event logs for mts Tx

detail1

(Optional) Configure detail port-security event logs for mts Tx

Command Mode

- /exec

event-history port_client category all

event-history port_client no category all

Syntax Description

event-history

switch wide event history configuration

port_client

Configure port_client event logs

no

Disable port_client event logs for category

category

Configure port_client event logs for category

all

Configure port_client event logs for category all events

Command Mode

- /exec

event-history port_client category all

event-history port_client category all

Syntax Description

event-history

switch wide event history configuration

port_client

Configure port_client event logs

category

Configure port_client event logs for category

all

Configure port_client event logs for category all events

Command Mode

- /exec

event-history port_client category fc2

event-history port_client no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

port_client

Configure port_client event logs

no

Disable port_client event logs for category

category

Configure port_client event logs for category

fc2

Configure port_client event logs for category FC2

rx

(Optional) Configure port_client event logs for FC2 Rx frames

brief

(Optional) Configure brief port_client event logs for FC2 Rx

detail

(Optional) Configure detail port_client event logs for FC2 Rx

tx

(Optional) Configure port_client event logs for FC2 Tx frames

brief

(Optional) Configure brief port_client event logs for FC2 Tx

detail

(Optional) Configure detail port_client event logs for FC2 Tx

Command Mode

- /exec

event-history port_client category fc2

event-history port_client category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

port_client

Configure port_client event logs

category

Configure port_client event logs for category

fc2

Configure port_client event logs for category FC2

rx

(Optional) Configure port_client event logs for FC2 Rx frames

brief

(Optional) Configure brief port_client event logs for FC2 Rx

detail

(Optional) Configure detail port_client event logs for FC2 Rx

tx

(Optional) Configure port_client event logs for FC2 Tx frames

brief

(Optional) Configure brief port_client event logs for FC2 Tx

detail

(Optional) Configure detail port_client event logs for FC2 Tx

Command Mode

- /exec

event-history port_client category mts

event-history port_client category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

port_client

Configure port_client event logs

category

Configure port_client event logs for category

mts

Configure port_client event logs for category mts

rx

(Optional) Configure port_client event logs for mts Rx frames

brief

(Optional) Configure brief port_client event logs for mts Rx

detail

(Optional) Configure detail port_client event logs for mts Rx

tx

(Optional) Configure port_client event logs for mts Tx frames

brief

(Optional) Configure brief port_client event logs for mts Tx

detail

(Optional) Configure detail port_client event logs for mts Tx

Command Mode

- /exec

event-history port_client category mts

event-history port_client no category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

port_client

Configure port_client event logs

no

Disable port_client event logs for category

category

Configure port_client event logs for category

mts

Configure port_client event logs for category mts

rx

(Optional) Configure port_client event logs for mts Rx frames

brief

(Optional) Configure brief port_client event logs for mts Rx

detail

(Optional) Configure detail port_client event logs for mts Rx

tx

(Optional) Configure port_client event logs for mts Tx frames

brief

(Optional) Configure brief port_client event logs for mts Tx

detail

(Optional) Configure detail port_client event logs for mts Tx

Command Mode

- /exec

event-history private-vlan category all

event-history private-vlan [ no ] category all

Syntax Description

event-history

switch wide event history configuration

private-vlan

Configure private VLAN event logs

no

(Optional) Disable private VLAN logs for category

category

Configure private VLAN event logs for category

all

Configure private VLAN event logs for category all events

Command Mode

- /exec

event-history private-vlan category mts

event-history private-vlan [ no ] category mts [ rx [ { brief | detail } ] ]

Syntax Description

event-history

switch wide event history configuration

private-vlan

Configure private VLAN event logs

no

(Optional) Disable private VLAN logs for category

category

Configure private VLAN event logs for category

mts

Configure private VLAN event logs for category mts

rx

(Optional) Configure private VLAN event logs for mts Rx frames

brief

(Optional) Configure brief private VLAN event logs for mts Rx

detail

(Optional) Configure detail private VLAN event logs for mts Rx

Command Mode

- /exec

event-history private-vlan category mts

event-history private-vlan [ no ] category mts [ tx [ { brief | detail } ] ]

Syntax Description

event-history

switch wide event history configuration

private-vlan

Configure private VLAN event logs

no

(Optional) Disable private VLAN logs for category

category

Configure private VLAN event logs for category

mts

Configure private VLAN event logs for category mts

tx

(Optional) Configure private VLAN event logs for mts Tx frames

brief

(Optional) Configure brief private VLAN event logs for mts Tx

detail

(Optional) Configure detail private VLAN event logs for mts Tx

Command Mode

- /exec

event-history sensor

event-history sensor { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ] } | no category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

sensor

Configure sensor USD event logs

category

Configure sensor USD event logs for category

all

Configure sensor USD event logs for category all events

mts

Configure sensor USD event logs for category mts

rx

(Optional) Configure sensor USD event logs for mts Rx frames

brief

(Optional) Configure brief sensor USD event logs for mts Rx

detail

(Optional) Configure detail sensor USD event logs for mts Rx

tx

(Optional) Configure sensor USD event logs for mts Tx frames

brief

(Optional) Configure brief sensor USD event logs for mts Tx

detail

(Optional) Configure detail sensor USD event logs for mts Tx

no

Disable sensor USD event logs for category

category

Configure sensor USD event logs for category

all

Configure sensor USD event logs for category all events

mts

Configure sensor USD event logs for category mts

rx

(Optional) Configure sensor USD event logs for mts Rx frames

brief

(Optional) Configure brief sensor USD event logs for mts Rx

detail

(Optional) Configure detail sensor USD event logs for mts Rx

tx

(Optional) Configure sensor USD event logs for mts Tx frames

brief

(Optional) Configure brief sensor USD event logs for mts Tx

detail

(Optional) Configure detail sensor USD event logs for mts Tx

Command Mode

- /exec

event-history session-mgr category all

event-history session-mgr category all

Syntax Description

event-history

switch wide event history configuration

session-mgr

Configure session-mgr event logs

category

Configure session-mgr event logs for category

all

Configure session-mgr event logs for category all events

Command Mode

- /exec

event-history session-mgr category all

event-history session-mgr no category all

Syntax Description

event-history

switch wide event history configuration

session-mgr

Configure session-mgr event logs

no

Disable session-mgr event logs for category

category

Configure session-mgr event logs for category

all

Configure session-mgr event logs for category all events

Command Mode

- /exec

event-history session-mgr category mts

event-history session-mgr no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

session-mgr

Configure session-mgr event logs

no

Disable session-mgr event logs for category

category

Configure session-mgr event logs for category

mts

Configure session-mgr event logs for category mts

rx

(Optional) Configure session-mgr event logs for mts Rx frames

brief

(Optional) Configure brief session-mgr event logs for mts Rx

detail

(Optional) Configure detail session-mgr event logs for mts Rx

tx

(Optional) Configure session-mgr event logs for mts Tx frames

brief1

(Optional) Configure brief session-mgr event logs for mts Tx

detail1

(Optional) Configure detail session-mgr event logs for mts Tx

Command Mode

- /exec

event-history session-mgr category mts

event-history session-mgr category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

session-mgr

Configure session-mgr event logs

category

Configure session-mgr event logs for category

mts

Configure session-mgr event logs for category mts

rx

(Optional) Configure session-mgr event logs for mts Rx frames

brief

(Optional) Configure brief session-mgr event logs for mts Rx

detail

(Optional) Configure detail session-mgr event logs for mts Rx

tx

(Optional) Configure session-mgr event logs for mts Tx frames

brief1

(Optional) Configure brief session-mgr event logs for mts Tx

detail1

(Optional) Configure detail session-mgr event logs for mts Tx

Command Mode

- /exec

event-history sflow

event-history sflow { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

sflow

Configure sFlow event logs

category

Configure sFlow event logs for category

all

Configure sFlow event logs for category all events

mts

Configure sFlow event logs for category mts

rx

(Optional) Configure sFlow event logs for mts Rx frames

brief

(Optional) Configure brief sFlow event logs for mts Rx

detail

(Optional) Configure detail sFlow event logs for mts Rx

tx

(Optional) Configure sFlow event logs for mts Tx frames

brief1

(Optional) Configure brief sFlow event logs for mts Tx

detail1

(Optional) Configure detail sFlow event logs for mts Tx

no

Disable sFlow event logs for category

category

Configure sFlow event logs for category

all

Configure sFlow event logs for category all events

mts

Configure sFlow event logs for category mts

rx

(Optional) Configure sFlow event logs for mts Rx frames

brief1

(Optional) Configure brief sFlow event logs for mts Rx

detail1

(Optional) Configure detail sFlow event logs for mts Rx

tx

(Optional) Configure sFlow event logs for mts Tx frames

brief2

(Optional) Configure brief sFlow event logs for mts Tx

detail2

(Optional) Configure detail sFlow event logs for mts Tx

Command Mode

- /exec

event-history snmp

event-history snmp { category { all | mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ] } | no category { all | mts [ { rx [ { brief1 | detail1 } ] | tx [ { brief2 | detail2 } ] } ] } }

Syntax Description

event-history

switch wide event history configuration

snmp

Configure SNMP event logs

category

Configure SNMP event logs for category

all

Configure SNMP event logs for category all events

mts

Configure snmp event logs for category MTS

rx

(Optional) Configure snmp event logs for MTS Rx frames

brief

(Optional) Configure brief SNMP event logs for MTS Rx

detail

(Optional) Configure detail SNMP event logs for MTS Rx

tx

(Optional) Configure SNMP event logs for MTS Tx frames

brief1

(Optional) Configure brief SNMP event logs for MTS Tx

detail1

(Optional) Configure detail snmp event logs for MTS Tx

no

Disable SNMP event logs for category

category

Configure SNMP event logs for category

all

Configure SNMP event logs for category all events

mts

Configure snmp event logs for category MTS

rx

(Optional) Configure snmp event logs for MTS Rx frames

brief1

(Optional) Configure brief SNMP event logs for MTS Rx

detail1

(Optional) Configure detail SNMP event logs for MTS Rx

tx

(Optional) Configure SNMP event logs for MTS Tx frames

brief2

(Optional) Configure brief SNMP event logs for MTS Tx

detail2

(Optional) Configure detail snmp event logs for MTS Tx

Command Mode

- /exec

event-history spanning-tree category all

event-history spanning-tree category all

Syntax Description

event-history

switch wide event history configuration

spanning-tree

Configure stp event logs

category

Configure stp event logs for category

all

Configure stp event logs for category all events

Command Mode

- /exec

event-history spm category all

event-history spm category all

Syntax Description

event-history

switch wide event history configuration

spm

Configure spm event logs

category

Configure spm event logs for category

all

Configure spm event logs for category all events

Command Mode

- /exec

event-history spm category all

event-history spm no category all

Syntax Description

event-history

switch wide event history configuration

spm

Configure spm event logs

no

Disable spm event logs for category

category

Configure spm event logs for category

all

Configure spm event logs for category all events

Command Mode

- /exec

event-history spm category fc2

event-history spm category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

spm

Configure spm event logs

category

Configure spm event logs for category

fc2

Configure spm event logs for category FC2

rx

(Optional) Configure spm event logs for FC2 Rx frames

brief

(Optional) Configure brief spm event logs for FC2 Rx

detail

(Optional) Configure detail spm event logs for FC2 Rx

tx

(Optional) Configure spm event logs for FC2 Tx frames

brief1

(Optional) Configure brief spm event logs for FC2 Tx

detail1

(Optional) Configure detail spm event logs for FC2 Tx

Command Mode

- /exec

event-history spm category fc2

event-history spm no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

spm

Configure spm event logs

no

Disable spm event logs for category

category

Configure spm event logs for category

fc2

Configure spm event logs for category FC2

rx

(Optional) Configure spm event logs for FC2 Rx frames

brief

(Optional) Configure brief spm event logs for FC2 Rx

detail

(Optional) Configure detail spm event logs for FC2 Rx

tx

(Optional) Configure spm event logs for FC2 Tx frames

brief1

(Optional) Configure brief spm event logs for FC2 Tx

detail1

(Optional) Configure detail spm event logs for FC2 Tx

Command Mode

- /exec

event-history spm category mts

event-history spm no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

spm

Configure spm event logs

no

Disable spm event logs for category

category

Configure spm event logs for category

mts

Configure spm event logs for category mts

rx

(Optional) Configure spm event logs for mts Rx frames

brief

(Optional) Configure brief spm event logs for mts Rx

detail

(Optional) Configure detail spm event logs for mts Rx

tx

(Optional) Configure spm event logs for mts Tx frames

brief1

(Optional) Configure brief spm event logs for mts Tx

detail1

(Optional) Configure detail spm event logs for mts Tx

Command Mode

- /exec

event-history spm category mts

event-history spm category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

spm

Configure spm event logs

category

Configure spm event logs for category

mts

Configure spm event logs for category mts

rx

(Optional) Configure spm event logs for mts Rx frames

brief

(Optional) Configure brief spm event logs for mts Rx

detail

(Optional) Configure detail spm event logs for mts Rx

tx

(Optional) Configure spm event logs for mts Tx frames

brief1

(Optional) Configure brief spm event logs for mts Tx

detail1

(Optional) Configure detail spm event logs for mts Tx

Command Mode

- /exec

event-history stripcl category all

event-history stripcl no category all

Syntax Description

event-history

switch wide event history configuration

stripcl

Configure stripcl event logs

no

Disable stripcl event logs for category

category

Configure stripcl event logs for category

all

Configure stripcl event logs for category all events

Command Mode

- /exec

event-history stripcl category all

event-history stripcl category all

Syntax Description

event-history

switch wide event history configuration

stripcl

Configure stripcl event logs

category

Configure stripcl event logs for category

all

Configure stripcl event logs for category all events

Command Mode

- /exec

event-history stripcl category mts

event-history stripcl category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

stripcl

Configure stripcl event logs

category

Configure stripcl event logs for category

mts

Configure stripcl event logs for category mts

rx

(Optional) Configure stripcl event logs for mts Rx frames

brief

(Optional) Configure brief stripcl event logs for mts Rx

detail

(Optional) Configure detail stripcl event logs for mts Rx

tx

(Optional) Configure stripcl event logs for mts Tx frames

brief

(Optional) Configure brief stripcl event logs for mts Tx

detail

(Optional) Configure detail stripcl event logs for mts Tx

Command Mode

- /exec

event-history tamnw category all

event-history tamnw category all

Syntax Description

event-history

switch wide event history configuration

tamnw

Configure tamnw event logs

category

Configure tamnw event logs for category

all

Configure tamnw event logs for category all events

Command Mode

- /exec

event-history tamnw category all

event-history tamnw no category all

Syntax Description

event-history

switch wide event history configuration

tamnw

Configure tamnw event logs

no

Disable tamnw event logs for category

category

Configure tamnw event logs for category

all

Configure tamnw event logs for category all events

Command Mode

- /exec

event-history tamnw category fc2

event-history tamnw category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

tamnw

Configure tamnw event logs

category

Configure tamnw event logs for category

fc2

Configure tamnw event logs for category FC2

rx

(Optional) Configure tamnw event logs for FC2 Rx frames

brief

(Optional) Configure brief tamnw event logs for FC2 Rx

detail

(Optional) Configure detail tamnw event logs for FC2 Rx

tx

(Optional) Configure tamnw event logs for FC2 Tx frames

brief

(Optional) Configure brief tamnw event logs for FC2 Tx

detail

(Optional) Configure detail tamnw event logs for FC2 Tx

Command Mode

- /exec

event-history tamnw category fc2

event-history tamnw no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

tamnw

Configure tamnw event logs

no

Disable tamnw event logs for category

category

Configure tamnw event logs for category

fc2

Configure tamnw event logs for category FC2

rx

(Optional) Configure tamnw event logs for FC2 Rx frames

brief

(Optional) Configure brief tamnw event logs for FC2 Rx

detail

(Optional) Configure detail tamnw event logs for FC2 Rx

tx

(Optional) Configure tamnw event logs for FC2 Tx frames

brief

(Optional) Configure brief tamnw event logs for FC2 Tx

detail

(Optional) Configure detail tamnw event logs for FC2 Tx

Command Mode

- /exec

event-history tamnw category mts

event-history tamnw category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

tamnw

Configure tamnw event logs

category

Configure tamnw event logs for category

mts

Configure tamnw event logs for category mts

rx

(Optional) Configure tamnw event logs for mts Rx frames

brief

(Optional) Configure brief tamnw event logs for mts Rx

detail

(Optional) Configure detail tamnw event logs for mts Rx

tx

(Optional) Configure tamnw event logs for mts Tx frames

brief

(Optional) Configure brief tamnw event logs for mts Tx

detail

(Optional) Configure detail tamnw event logs for mts Tx

Command Mode

- /exec

event-history tamnw category mts

event-history tamnw no category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

tamnw

Configure tamnw event logs

no

Disable tamnw event logs for category

category

Configure tamnw event logs for category

mts

Configure tamnw event logs for category mts

rx

(Optional) Configure tamnw event logs for mts Rx frames

brief

(Optional) Configure brief tamnw event logs for mts Rx

detail

(Optional) Configure detail tamnw event logs for mts Rx

tx

(Optional) Configure tamnw event logs for mts Tx frames

brief

(Optional) Configure brief tamnw event logs for mts Tx

detail

(Optional) Configure detail tamnw event logs for mts Tx

Command Mode

- /exec

event-history udld category all

event-history udld category all

Syntax Description

event-history

switch wide event history configuration

udld

Configure udld event logs

category

Configure udld event logs for category

all

Configure udld event logs for category all events

Command Mode

- /exec

event-history ufdm category all

event-history ufdm category all

Syntax Description

event-history

switch wide event history configuration

ufdm

Configure ufdm event logs

category

Configure ufdm event logs for category

all

Configure ufdm event logs for category all events

Command Mode

- /exec

event-history ufdm category all

event-history ufdm no category all

Syntax Description

event-history

switch wide event history configuration

ufdm

Configure ufdm event logs

no

Disable ufdm event logs for category

category

Configure ufdm event logs for category

all

Configure ufdm event logs for category all events

Command Mode

- /exec

event-history ufdm category fc2

event-history ufdm no category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

ufdm

Configure ufdm event logs

no

Disable ufdm event logs for category

category

Configure ufdm event logs for category

fc2

Configure ufdm event logs for category FC2

rx

(Optional) Configure ufdm event logs for FC2 Rx frames

brief

(Optional) Configure brief ufdm event logs for FC2 Rx

detail

(Optional) Configure detail ufdm event logs for FC2 Rx

tx

(Optional) Configure ufdm event logs for FC2 Tx frames

brief

(Optional) Configure brief ufdm event logs for FC2 Tx

detail

(Optional) Configure detail ufdm event logs for FC2 Tx

Command Mode

- /exec

event-history ufdm category fc2

event-history ufdm category fc2 [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

ufdm

Configure ufdm event logs

category

Configure ufdm event logs for category

fc2

Configure ufdm event logs for category FC2

rx

(Optional) Configure ufdm event logs for FC2 Rx frames

brief

(Optional) Configure brief ufdm event logs for FC2 Rx

detail

(Optional) Configure detail ufdm event logs for FC2 Rx

tx

(Optional) Configure ufdm event logs for FC2 Tx frames

brief

(Optional) Configure brief ufdm event logs for FC2 Tx

detail

(Optional) Configure detail ufdm event logs for FC2 Tx

Command Mode

- /exec

event-history ufdm category mts

event-history ufdm no category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

ufdm

Configure ufdm event logs

no

Disable ufdm event logs for category

category

Configure ufdm event logs for category

mts

Configure ufdm event logs for category mts

rx

(Optional) Configure ufdm event logs for mts Rx frames

brief

(Optional) Configure brief ufdm event logs for mts Rx

detail

(Optional) Configure detail ufdm event logs for mts Rx

tx

(Optional) Configure ufdm event logs for mts Tx frames

brief

(Optional) Configure brief ufdm event logs for mts Tx

detail

(Optional) Configure detail ufdm event logs for mts Tx

Command Mode

- /exec

event-history ufdm category mts

event-history ufdm category mts [ { rx [ { brief | detail } ] | tx [ { brief | detail } ] } ]

Syntax Description

event-history

switch wide event history configuration

ufdm

Configure ufdm event logs

category

Configure ufdm event logs for category

mts

Configure ufdm event logs for category mts

rx

(Optional) Configure ufdm event logs for mts Rx frames

brief

(Optional) Configure brief ufdm event logs for mts Rx

detail

(Optional) Configure detail ufdm event logs for mts Rx

tx

(Optional) Configure ufdm event logs for mts Tx frames

brief

(Optional) Configure brief ufdm event logs for mts Tx

detail

(Optional) Configure detail ufdm event logs for mts Tx

Command Mode

- /exec

event-history vdc category all

event-history vdc category all

Syntax Description

event-history

switch wide event history configuration

vdc

Configure vdc_mgr event logs

category

Configure vdc_mgr event logs for category

all

Configure vdc_mgr event logs for category all events

Command Mode

- /exec

event-history vdc category all

event-history vdc no category all

Syntax Description

event-history

switch wide event history configuration

vdc

Configure vdc_mgr event logs

no

Disable vdc_mgr event logs for category

category

Configure vdc_mgr event logs for category

all

Configure vdc_mgr event logs for category all events

Command Mode

- /exec

event-history vdc category mts

event-history vdc no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

vdc

Configure vdc_mgr event logs

no

Disable vdc_mgr event logs for category

category

Configure vdc_mgr event logs for category

mts

Configure vdc_mgr event logs for category mts

rx

(Optional) Configure vdc_mgr event logs for mts Rx frames

brief

(Optional) Configure brief vdc_mgr event logs for mts Rx

detail

(Optional) Configure detail vdc_mgr event logs for mts Rx

tx

(Optional) Configure vdc_mgr event logs for mts Tx frames

brief1

(Optional) Configure brief vdc_mgr event logs for mts Tx

detail1

(Optional) Configure detail vdc_mgr event logs for mts Tx

Command Mode

- /exec

event-history vlan category all

event-history vlan [ no ] category all

Syntax Description

event-history

switch wide event history configuration

vlan

Configure vlan manager event logs

no

(Optional) Disable vlan manager logs for category

category

Configure vlan manager event logs for category

all

Configure vlan manager event logs for category all events

Command Mode

- /exec

event-history vlan category mts

event-history vlan [ no ] category mts [ tx [ { brief | detail } ] ]

Syntax Description

event-history

switch wide event history configuration

vlan

Configure vlan manager event logs

no

(Optional) Disable vlan manager logs for category

category

Configure vlan manager event logs for category

mts

Configure vlan manager event logs for category mts

tx

(Optional) Configure vlan manager event logs for mts Tx frames

brief

(Optional) Configure brief vlan manager event logs for mts Tx

detail

(Optional) Configure detail vlan manager event logs for mts Tx

Command Mode

- /exec

event-history vlan category mts

event-history vlan [ no ] category mts [ rx [ { brief | detail } ] ]

Syntax Description

event-history

switch wide event history configuration

vlan

Configure vlan manager event logs

no

(Optional) Disable vlan manager logs for category

category

Configure vlan manager event logs for category

mts

Configure vlan manager event logs for category mts

rx

(Optional) Configure vlan manager event logs for mts Rx frames

brief

(Optional) Configure brief vlan manager event logs for mts Rx

detail

(Optional) Configure detail vlan manager event logs for mts Rx

Command Mode

- /exec

event-history xbar category all

event-history xbar category all

Syntax Description

event-history

switch wide event history configuration

xbar

Configure xbar event logs

category

Configure xbar event logs for category

all

Configure xbar event logs for category all events

Command Mode

- /exec

event-history xbar category all

event-history xbar no category all

Syntax Description

event-history

switch wide event history configuration

xbar

Configure xbar event logs

no

Disable xbar event logs for category

category

Configure xbar event logs for category

all

Configure xbar event logs for category all events

Command Mode

- /exec

event-history xbar category debug

event-history xbar category debug { demux | deque | flow | ha | init }

Syntax Description

event-history

switch wide event history configuration

xbar

Configure xbar event logs

category

Configure xbar event logs for category

debug

Configure xbar event logs for category debug

demux

Configure xbar event logs for category demux

deque

Configure xbar event logs for category deque

flow

Configure xbar event logs for category flow

ha

Configure xbar event logs for category HA

init

Configure xbar event logs for category init

Command Mode

- /exec

event-history xbar category debug

event-history xbar no category debug { demux | deque | flow | ha | init }

Syntax Description

event-history

switch wide event history configuration

xbar

Configure xbar event logs

no

Disable xbar event logs for category

category

Configure xbar event logs for category

debug

Configure xbar event logs for category debug

demux

Configure xbar event logs for category demux

deque

Configure xbar event logs for category deque

flow

Configure xbar event logs for category flow

ha

Configure xbar event logs for category HA

init

Configure xbar event logs for category init

Command Mode

- /exec

event-history xbar category mts

event-history xbar category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

xbar

Configure xbar event logs

category

Configure xbar event logs for category

mts

Configure xbar event logs for category mts

rx

(Optional) Configure xbar event logs for mts Rx frames

brief

(Optional) Configure brief xbar event logs for mts Rx

detail

(Optional) Configure detail xbar event logs for mts Rx

tx

(Optional) Configure xbar event logs for mts Tx frames

brief1

(Optional) Configure brief xbar event logs for mts Tx

detail1

(Optional) Configure detail xbar event logs for mts Tx

Command Mode

- /exec

event-history xbar category mts

event-history xbar no category mts [ { rx [ { brief | detail } ] | tx [ { brief1 | detail1 } ] } ]

Syntax Description

event-history

switch wide event history configuration

xbar

Configure xbar event logs

no

Disable xbar event logs for category

category

Configure xbar event logs for category

mts

Configure xbar event logs for category mts

rx

(Optional) Configure xbar event logs for mts Rx frames

brief

(Optional) Configure brief xbar event logs for mts Rx

detail

(Optional) Configure detail xbar event logs for mts Rx

tx

(Optional) Configure xbar event logs for mts Tx frames

brief1

(Optional) Configure brief xbar event logs for mts Tx

detail1

(Optional) Configure detail xbar event logs for mts Tx

Command Mode

- /exec

event-log-size

{ { [ eigrp ] event-log-size <size> } | { no [ eigrp ] event-log-size [ <size> ] } }

Syntax Description

no

Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

event-log-size

Set IP-EIGRP event log size

size

Event log size

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

event-logging

[no] [ eigrp ] event-logging

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

event-logging

Log IP-EIGRP routing events

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

event

[no] event

Syntax Description

no

Negate a command or set its defaults

event

Configure an event specification

Command Mode

- /exec/configure/event-manager-applet

event application sub-system type

[no] event application [ tag <tag_id> ] sub-system <sub-system-id> type <event-type>

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

application

Application specific event

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

sub-system

Sub-system ID that will publish the application event

sub-system-id

Sub-system ID value

type

Event type within the specified sub-system

event-type

Event type value

Command Mode

- /exec/configure/event-manager-applet

event cli match

[no] event cli [ tag <tag_id> ] match <regex> [ count <countnum> [ time <interval> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

cli

Create a cli event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

match

Enter cli regex to be used for matching

regex

CLI regex, use * to wildcard a token

count

(Optional) Enter an integer to be used as count

countnum

(Optional) Integer count

time

(Optional) Enter time interval within which the events need to happen

interval

(Optional) Time interval in seconds, 0 for indefinitely

Command Mode

- /exec/configure/event-manager-applet

event counter name entry-val entry-op

[no] event counter [ tag <tag_id> ] name <counter-name> entry-val <entry-val> entry-op <entry-op> [ exit-val <exit-val> exit-op <exit-op> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

counter

Create a counter event

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

name

Enter the name of the counter

counter-name

Name of the counter

entry-val

Specify the counter entry conditions

entry-val

Specify the value for comparison with the counter value

entry-op

Specify the operator to be used for comparison

entry-op

Specify the comparison operator

exit-val

(Optional) Specify the counter exit conditions

exit-val

(Optional) Specify the value for comparison with the counter value

exit-op

(Optional) Specify the operator to be used for comparison

exit-op

(Optional) Specify the comparison operator

Command Mode

- /exec/configure/event-manager-applet

event fanabsent time

[no] event fanabsent [ fan <fan-number> ] time <time-interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

fanabsent

Create fanabsent event specification

fan

(Optional) Optional. Enter fan number (optional arg)

fan-number

(Optional) Enter fan-number

time

Enter time

time-interval

Time in seconds fan can stay absent

Command Mode

- /exec/configure/event-manager-applet

event fanbad time

[no] event fanbad [ fan <fan-number> ] time <time-interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

fanbad

Create fanbad event specification

fan

(Optional) Optional. Enter fan number (optional arg)

fan-number

(Optional) Enter fan-number

time

Enter time

time-interval

Time in seconds fan can stay bad

Command Mode

- /exec/configure/event-manager-applet

event fib adjacency extra

[no] event fib adjacency extra

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

fib

FIB related event

adjacency

Adjacency related event

extra

Route extra in FIB

Command Mode

- /exec/configure/event-manager-applet

event fib resource tcam usage

[no] event fib resource tcam usage

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

fib

FIB related event

resource

Specify forwarding hardware resource related event

tcam

Specify TCAM related event

usage

Specify TCAM usage related event

Command Mode

- /exec/configure/event-manager-applet

event fib route

[no] event fib route { inconsistent | missing | extra }

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

fib

FIB related event

route

IP Route related event

inconsistent

Inconsistent route in FIB

missing

Missing route in FIB

extra

Route extra in FIB

Command Mode

- /exec/configure/event-manager-applet

event gold module test testing-type scheduled consecutive-failure

event gold module { <module> | all } test { <name> } [ severity { minor | moderate | major } ] testing-type { scheduled | monitoring } consecutive-failure <cnt> | no event gold module { <module> | all } test { <name> }

Syntax Description

no

Negate a command or set its defaults

event

Configure an event specification

gold

Create a 'Diagnostic' event specification

module

Module keyword

module

Module Number

all

Select all module ID

test

Diagnostic test selection

name

Test name

severity

(Optional) Severity of failure

minor

(Optional) Minor failure

moderate

(Optional) Moderate failure

major

(Optional) Major failure

testing-type

Type of Diagnostic test

scheduled

Scheduled Test

monitoring

Monitoring Test

consecutive-failure

Consecutive number of times failure has occurred

cnt

Failure count

Command Mode

- /exec/configure/event-manager-applet

event interface name parameter entry-val entry-op entry-type poll-interval

[no] event interface [ tag <tag_id> ] name <interface-name> parameter <counter-name> entry-val <entry-val> entry-op { en_gt | en_ge | en_eq | en_ne | en_lt | en_le } entry-type { en_value | en_increment | en_rate } poll-interval <poll-int-val> [ exit-comb { or | and } ] [ exit-val <exit-val> exit-op { ex_gt | ex_ge | ex_eq | ex_ne | ex_lt | ex_le } exit-type { ex_value | ex_increment | ex_rate } ] [ exit-time <exit-time-val> ] [ exit-event { false | true } ] [ average-factor <avg-factor-val> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

interface

Interface event

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

name

Interface name

interface-name

Interface name string

parameter

Interface counter to monitor

counter-name

Name of the interface counter

entry-val

Counter value be compared to raise interface event

entry-val

Entry counter value

entry-op

Entry comparison operator

en_gt

Greater than

en_ge

Greater than or equal to

en_eq

Equal to

en_ne

Not equal to

en_lt

Less than

en_le

Less than or equal to

entry-type

Entry comparison type

en_value

Entry-val specifies an absolute value

en_increment

Entry-val specifies an increment

en_rate

Entry-val specifies the rate of change over a period

poll-interval

Interval between consecutive polls in seconds

exit-comb

(Optional) Exit combination operator for exit condition tests

or

(Optional) Either exit-op/exit-val or exit-time must exist

and

(Optional) Both exit-op/exit-val and exit-time must exist

exit-val

(Optional) Exit counter value for interface event

exit-val

(Optional) Exit value

exit-op

(Optional) Exit comparison operator

ex_gt

(Optional) Greater than

ex_ge

(Optional) Greater than or equal to

ex_eq

(Optional) Equal to

ex_ne

(Optional) Not equal to

ex_lt

(Optional) Less than

ex_le

(Optional) Less than or equal to

exit-type

(Optional) Exit comparison type

ex_value

(Optional) Exit-val specifies an absolute value

ex_increment

(Optional) Exit-val specifies an increment

ex_rate

(Optional) Exit-val specifies the rate of change over a period

exit-time

(Optional) Time before event monitoring is reenabled

exit-event

(Optional) Raise an exit event upon exit

false

(Optional) Do not raise an exit event upon exit

true

(Optional) Raise an exit event upon exit

average-factor

(Optional) Period used for rate based calculations

avg-factor-val

(Optional) Average factor value

Command Mode

- /exec/configure/event-manager-applet

event manager applet

[no] event manager applet <name> [ module <module-id> ] [ override <override-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Event Manager commands

manager

Event Manager commands

applet

Create/Modify an Event Manager Policy

name

Name of policy (cannot have underscore in first two characters)

module

(Optional) Restrict policy to a module

module-id

(Optional)

override

(Optional) Override a system policy

override-name

(Optional) Name of the system policy to override - should begin with double underscore

Command Mode

- /exec/configure

event manager clear counter

event manager clear counter <counter-name>

Syntax Description

event

Event Manager commands

manager

Event Manager commands

clear

Clear event manager information

counter

Clear the value of a counter

counter-name

Name of the counter

Command Mode

- /exec

event manager clear history events

event manager clear history events

Syntax Description

event

Event Manager commands

manager

Event Manager commands

clear

Clear event manager information

history

Clear the stored/archived information

events

Clear all the stored/archived event history for this VDC

Command Mode

- /exec

event manager command maximum-timeout

event manager command maximum-timeout

Syntax Description

event

Event Manager commands

manager

Event Manager commands

command

Cli's configured as policy actions

maximum-timeout

Allot maximum timeout for cli action execution

Command Mode

- /exec

event manager environment

event manager environment <varname> <varvalue> | no event manager environment <varname>

Syntax Description

no

Negate a command or set its defaults

event

Event Manager commands

manager

Event Manager commands

environment

Configure an environment variable

varname

Name of the environment variable

varvalue

Value of the environment variable

Command Mode

- /exec/configure

event manager policy

event manager policy <name>

Syntax Description

event

Event Manager commands

manager

Event Manager commands

policy

Register a script policy and activate it

name

Name of the script policy file

Command Mode

- /exec/configure

event manager run

event manager run <policy-name> [ <arg1> [ <arg2> [ <arg3> [ <arg4> [ <arg5> [ <arg6> [ <arg7> [ <arg8> [ <arg9> [ <arg10> ] ] ] ] ] ] ] ] ] ]

Syntax Description

event

Event Manager commands

manager

Event Manager commands

run

Trigger/run an event manager policy manually

policy-name

Name of the policy to be triggered-cannot specify default system policy

arg1

(Optional) User specified data value 1

arg2

(Optional) User specified data value 2

arg3

(Optional) User specified data value 3

arg4

(Optional) User specified data value 4

arg5

(Optional) User specified data value 5

arg6

(Optional) User specified data value 6

arg7

(Optional) User specified data value 7

arg8

(Optional) User specified data value 8

arg9

(Optional) User specified data value 9

arg10

(Optional) User specified data value 10

Command Mode

- /exec

event manager script

[no] event manager script <name> [ override <override-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Event Manager commands

manager

Event Manager commands

script

Create/Modify an Event Manager Policy

name

Name of the policy - cannot have underscore in first two characters

override

(Optional) Have this policy override a system policy

override-name

(Optional) Name of the system policy to override - should begin with double underscore

Command Mode

- /exec/configure

event memory

[no] event memory { minor | severe | critical }

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

memory

Create memory thresholds event specification

minor

Minor alert

severe

Severe alert

critical

Critical alert

Command Mode

- /exec/configure/event-manager-applet

event module-failure type module count

[no] event module-failure [ tag <tag_id> ] type <err-name> module { all | <module> } count <countnum> [ time <interval> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

module-failure

Create a 'module-failure' event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

type

Enter an error type

err-name

module

Enter a module number

all

All modules

module

Enter module number

count

Enter an integer to be used as count

countnum

Integer count

time

(Optional) Enter time interval within which the events need to happen

interval

(Optional) Time interval in seconds

Command Mode

- /exec/configure/event-manager-applet

event module status module1

[no] event module [ tag <tag_id> ] status { online | offline | any } module1 { all | <module> }

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

module

Create a 'module' event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

status

Status event

online

Online status

offline

Offline status

any

Online or offline status

module1

Enter a module number

all

All modules

module

Enter module number

Command Mode

- /exec/configure/event-manager-applet

event neighbor-discovery

[no] event [ tag <tag_id> ] neighbor-discovery

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

neighbor-discovery

Show CDP new neighbors

Command Mode

- /exec/configure/event-manager-applet

event none

[no] event none [ tag <tag_id> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

none

Manually run policy event with none

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

Command Mode

- /exec/configure/event-manager-applet

event oir fan

[no] event oir [ tag <tag_id> ] fan { insert | remove | anyoir } [ <fannum> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

oir

Create Online-Insertion-Removal event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

fan

Fan OIR

insert

OIR insert

remove

OIR remove

anyoir

any OIR (Either insert or remove)

fannum

(Optional) Optional. Enter Fan number.

Command Mode

- /exec/configure/event-manager-applet

event oir module

[no] event oir [ tag <tag_id> ] module { insert | remove | anyoir } [ <module> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

oir

Create Online-Insertion-Removal event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

module

Module OIR

insert

OIR insert

remove

OIR remove

anyoir

any OIR (Either insert or remove)

module

(Optional) Optional. Enter module number

Command Mode

- /exec/configure/event-manager-applet

event oir powersupply

[no] event oir [ tag <tag_id> ] powersupply { insert | remove | anyoir } [ <powersupnum> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

oir

Create Online-Insertion-Removal event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

powersupply

powersupply OIR

insert

OIR insert

remove

OIR remove

anyoir

any OIR (Either insert or remove)

powersupnum

(Optional) Optional. Enter powersupply number

Command Mode

- /exec/configure/event-manager-applet

event policy-default count

[no] event policy-default count <countnum> [ time <interval> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

policy-default

Use the event in the system policy being overridden

count

Enter an integer to be used as count

countnum

Integer count

time

(Optional) Enter time interval within which the events need to happen

interval

(Optional) Time interval in seconds

Command Mode

- /exec/configure/event-manager-applet

event poweroverbudget

[no] event poweroverbudget

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

poweroverbudget

Create poweroverbudget event specification

Command Mode

- /exec/configure/event-manager-applet

event snmp oid get-type exact entry-op entry-val poll-interval

[no] event snmp [ tag <tag_id> ] oid <oid-val> get-type { exact | next } entry-op { ent_gt | ent_ge | ent_eq | ent_ne | ent_lt | ent_le } entry-val <entry-val> [ { exit-comb { or | and } exit-op { ex_gt | ex_ge | ex_eq | ex_ne | ex_lt | ex_le } exit-val <exit-val> exit-time <exit-time-val> } | { exit-op1 { ex_gt1 | ex_ge1 | ex_eq1 | ex_ne1 | ex_lt1 | ex_le1 } exit-val1 <exit-val1> } ] poll-interval <poll-int-val>

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

snmp

Create a 'snmp' event specification.

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

oid

oid of data element in dot notation.

oid-val

oid of data element in dot notation.

get-type

The type of SNMP get operation.

exact

exact

next

next

entry-op

entry comparison operator.

ent_gt

greater than

ent_ge

greater than or equal to

ent_eq

equal to

ent_ne

not equal to

ent_lt

less than

ent_le

less than or equal to

entry-val

value to compare with the current polled value

entry-val

value to compare with the current polled value

exit-comb

(Optional) exit criterion combination

or

(Optional) logical OR

and

(Optional) logical AND

exit-op

(Optional) exit comparison operator.

ex_gt

(Optional) greater than

ex_ge

(Optional) greater than or equal to

ex_eq

(Optional) equal to

ex_ne

(Optional) not equal to

ex_lt

(Optional) less than

ex_le

(Optional) less than or equal to

exit-val

(Optional) value to compare with the current polled value

exit-val

(Optional) value to compare with the current polled value

exit-op1

(Optional) exit comparison operator.

ex_gt1

(Optional) greater than

ex_ge1

(Optional) greater than or equal to

ex_eq1

(Optional) equal to

ex_ne1

(Optional) not equal to

ex_lt1

(Optional) less than

ex_le1

(Optional) less than or equal to

exit-val1

(Optional) value to compare with the current polled value

exit-val1

(Optional) value to compare with the current polled value

exit-time

(Optional) exit time

exit-time-val

(Optional) exit time in seconds

poll-interval

polling interval

poll-int-val

polling interval in seconds

Command Mode

- /exec/configure/event-manager-applet

event storm-control

[no] event storm-control

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

storm-control

Create a storm control event specification

Command Mode

- /exec/configure/event-manager-applet

event syslog pattern

[no] event syslog [ tag <tag_id> ] [ occurs <num-occurences> ] [ period <period-value> ] [ priority [ <i0> | alerts | critical | debugging | emergencies | errors | informational | notifications | warnings ] ] pattern <regex>

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

syslog

Create a syslog event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

occurs

(Optional) Enter an integer to be used for number of occurences

num-occurences

(Optional) Integer count

period

(Optional) Enter time interval within which the events need to happen

period-value

(Optional) Time interval in seconds, 0 for indefinitely

priority

(Optional) Priority of the log message

i0

(Optional) Enter priority of the log message

alerts

(Optional) Alert log message

critical

(Optional) Critical log message

debugging

(Optional) Debugging log message

emergencies

(Optional) Emergency log message

errors

(Optional) Error log message

informational

(Optional) Informational log message

notifications

(Optional) Notifications log message

warnings

(Optional) Warning log message

pattern

Enter regex to be used for matching

regex

SYSLOG regex

Command Mode

- /exec/configure/event-manager-applet

event sysmgr memory major minor clear

[no] event sysmgr memory [ module <module> ] major <i0> minor <i1> clear <i2>

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

sysmgr

system manager related events

memory

memory alert event

module

(Optional) Optional. Enter module number

module

(Optional) Enter module-number

major

set major memory threshold

i0

major memory threshold

minor

set minor memory threshold

i1

minor memory threshold

clear

set clear memory alert threshold

i2

clear memory threshold

Command Mode

- /exec/configure/event-manager-applet

event sysmgr switchover count time

[no] event sysmgr switchover count <countnum> time <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

sysmgr

System manager related events

switchover

Switchover related event

count

Number of switchovers after which event should be triggered

countnum

Integer count

time

Enter time interval within which the events need to happen

interval

Time interval in seconds

Command Mode

- /exec/configure/event-manager-applet

event temperature threshold

[no] event temperature [ module <module> ] [ sensor <sensornum> ] threshold { major | minor | any }

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

temperature

Create temperature event specification

module

(Optional) Optional. Enter module number (optional arg)

module

(Optional) Enter module-number

sensor

(Optional) Optional. Enter sensor number (optional arg)

sensornum

(Optional) Enter sensor number

threshold

Enter Major or Minor threshold

major

Major threshold

minor

Minor threshold

any

Major or Minor

Command Mode

- /exec/configure/event-manager-applet

event test match

[no] event test [ tag <tag_id> ] match <num> [ count <countnum> ] [ time <interval> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

test

Create a 'test' event specification

match

Enter an integer to be used for matching

num

Integer value

count

(Optional) Enter an integer to be used as count

countnum

(Optional) Integer count

time

(Optional) <interval>

interval

(Optional) Time interval in seconds

Command Mode

- /exec/configure/event-manager-applet

event timer

[no] event timer [ tag <tag_id> ] { watchdog wtime <watchdog-time> | absolute atime <absolute-time> | countdown ctime <countdown-time> | cron cron-entry <cron-time> } [ name <timer_name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

event

Configure an event specification

timer

Create a timer event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

name

(Optional) name of the timer

timer_name

(Optional) Enter the timer name

watchdog

Watchdog timer event

wtime

Time period for watchdog

watchdog-time

<1-1924991999[.0-999]> Enter seconds[.milliseconds] value

absolute

Absolute timer event.

atime

epoch time for absolute. Try epochconverter online tool to get value

absolute-time

<1-1924991999[.0-999]> Enter seconds[.milliseconds] value

countdown

Countdown timer event

ctime

Time period for countdown

countdown-time

<1-1924991999[.0-999]> Enter seconds[.milliseconds] value

cron

Cron timer event

cron-entry

Cron entry string

cron-time

format: * * * * * => min hour dom month dow

Command Mode

- /exec/configure/event-manager-applet

event track state

event track [ tag <tag_id> ] <object-id> state { any | up | down } | no event track [ tag <tag_id> ] <object-id>

Syntax Description

no

Negate a command or set its defaults

event

Configure an event specification

track

Create a 'track' event specification

tag

(Optional) event tag identifier

tag_id

(Optional) tag name

object-id

Track objects

state

State of tracking object

any

Any state

down

Down state

up

Up state

Command Mode

- /exec/configure/event-manager-applet

evpn

[no] evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

evpn

Enter EVPN configuration mode

Command Mode

- /exec/configure

evpn esi multihoming

[no] evpn esi multihoming

Syntax Description

no

(Optional) unconfigure the command

evpn

VxLAN evpn feature

esi

ESI based multihoming

multihoming

Multihoming feature

Command Mode

- /exec/configure/evpn-esi-multihoming

evpn multihoming core-tracking

[no] evpn multihoming core-tracking

Syntax Description

no

(Optional) Negate a command or set its defaults

evpn

VxLAN evpn feature

multihoming

VxLAN evpn multihoming

core-tracking

core interface tracking

Command Mode

- /exec/configure/if-port-channel /exec/configure/if-routing /exec/configure/if-vlan

exceptionlog module syserr devid errtype errcode phylayer ports harderror

exceptionlog module <module> syserr <syserr> devid <id> errtype <type> errcode <code> phylayer <phy> ports <list> harderror <hard> [ { desc <str> } ] [ { inband <intinband> } ]

Syntax Description

exceptionlog

Exception log

module

Enter a module number

module

Enter module number

syserr

Enter syserr

syserr

Syserr code

devid

Enter device id

id

Device id

errtype

Enter error type

type

Error type

errcode

Enter error code

code

Error code

phylayer

Enter phy layer

phy

Phy layer

ports

Enter failed ports

list

List of ports

harderror

Irrecoverable error?

hard

Error sub-category

desc

(Optional) Enter error description

str

(Optional) Error description

inband

(Optional) inband flag

intinband

(Optional) inband flag

Command Mode

- /exec

exclude access-list

[no] exclude access-list <acl-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

exclude

ACL to exclude from redirection

access-list

ITD access-list name

acl-name

ITD exclude ACL name

Command Mode

- /exec/configure/itd

exclude access-list

[no] exclude access-list <acl-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

exclude

ACL to exclude from redirection

access-list

ITD access-list name

acl-name

ITD exclude ACL name

Command Mode

- /exec/configure/itd

exec-timeout

{ exec-timeout <i0> | no exec-timeout [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

exec-timeout

Configure exec timeout

i0

Enter timeout in minutes, 0 to disable

Command Mode

- /exec/configure/line

exec-timeout

{ exec-timeout <i0> | no exec-timeout [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

exec-timeout

Configure exec timeout

i0

Enter timeout in minutes, 0 to disable

Command Mode

- /exec/configure/console

exit

exit

Syntax Description

exit

Exit from command interpreter

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

exit

exit

Syntax Description

exit

Exit from command interpreter

Command Mode

- /global

exp

[no] exp { default | <val> [ <val> [ <val> [ <val> [ <val> [ <val> [ <val> [ <val> ] ] ] ] ] ] ] [ default ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

exp

Set the experimental values allowed for this interface

default

Default all unconfigured exp to this interface

val

Enter up to 8 experimental values separated by white-spaces

Command Mode

- /exec/configure/tunnel-te/cbts-member

explicit-null

explicit-null [ for <pfx-list> ] [ to <peer-pfx-list> ] | no explicit-null

Syntax Description

no

Negate a command or set its defaults

explicit-null

Advertise Explicit Null label in place of Implicit Null

for

(Optional) Prefix list specifying controls on destination prefixes

pfx-list

(Optional) Name of prefix list

to

(Optional) Access-list specifying controls on LDP peers

peer-pfx-list

(Optional) Name of prefix list

Command Mode

- /exec/configure/ldp

explicit-path identifier

[no] explicit-path { identifier <id> | name <string> }

Syntax Description

no

(Optional) Negate a command or set its defaults

explicit-path

Configure explicit-path

identifier

Specify explicit path by number

id

Enter number

name

Specify explicit path by name

string

Enter name

Command Mode

- /exec/configure/te

export map

[no] export map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

export

VRF export

map

Route-map based VRF export

rmap-name

Route-map name

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

export vrf default map

[no] export vrf default [ <prefix-limit> ] map <rmap-name> [ allow-vpn ]

Syntax Description

no

(Optional) Negate a command or set its defaults

export

VRF export

vrf

Virtual Router Context

default

VRF name (default)

prefix-limit

(Optional) Maximum prefix limit

map

Route-map based VRF import

rmap-name

Route-map name

allow-vpn

(Optional) Allow re-importation of VPN imported routes

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

exporter

[no] exporter <exportername>

Syntax Description

exporter

Add an Exporter to use to export records

exportername

Name of exporter

Command Mode

- /exec/configure/nfm-monitor

Chapter 7. F Commands

- fabric-interface

- fabric-soo

- fabric database auto-pull dci vrf node-id

- fabric database auto-pull vni interface

- fabric database inherit-profile-map

- fabric database mobility-domain

- fabric database override-profile

- fabric database override-vrf-profile

- fabric database profile-map

- fabric database profile-map global

- fabric database refresh dot1q

- fabric database refresh vni

- fabric database timer

- fabric database type bl-dci

- fabric database type cabling

- fabric database type network

- fabric database type partition

- fabric database type profile

- fabric forwarding anycast-gateway-mac

- fabric forwarding dup-host-ip-addr-detection

- fabric forwarding dup-host-recovery-timer recover-count

- fabric forwarding limit-vlan-mac

- fabric forwarding mode anycast-gateway

- fabric forwarding selective-host-probe

- fabricpath domain

- fabricpath domain default

- fabricpath dynamic switch-id

- fabricpath force link-bringup

- fabricpath graceful-merge disable

- fabricpath isis authentication-check

- fabricpath isis authentication-type cleartext

- fabricpath isis authentication key-chain

- fabricpath isis csnp-interval

- fabricpath isis event-history adjacency

- fabricpath isis event-history cli

- fabricpath isis event-history csnp

- fabricpath isis event-history drap

- fabricpath isis event-history events

- fabricpath isis event-history graceful

- fabricpath isis event-history ha

- fabricpath isis event-history iih

- fabricpath isis event-history lsp-flood

- fabricpath isis event-history lsp-gen

- fabricpath isis event-history m2rib

- fabricpath isis event-history mccast

- fabricpath isis event-history psnp

- fabricpath isis event-history redist

- fabricpath isis event-history spf-leaf

- fabricpath isis event-history spf-tree

- fabricpath isis event-history urib

- fabricpath isis fabric-control

- fabricpath isis hello-interval

- fabricpath isis hello-multiplier

- fabricpath isis hello-padding

- fabricpath isis hello-padding always

- fabricpath isis lsp-interval

- fabricpath isis mesh-group

- fabricpath isis metric

- fabricpath isis mtu-check

- fabricpath isis retransmit-interval

- fabricpath isis retransmit-throttle-interval

- fabricpath isis test add

- fabricpath isis topology

- fabricpath load-balance

- fabricpath load-balance multicast

- fabricpath load-balance unicast

- fabricpath multicast aggregate-routes

- fabricpath multicast load-balance

- fabricpath switch-id

- fabricpath switch-id

- fabricpath timers allocate-delay

- fabricpath timers linkup-delay

- fabricpath timers transition-delay

- fabricpath topology-member

- fabricpath topology

- fabricpath unicast route

- failaction

- failaction

- fast-convergence

- fast-external-fallover

- fast-flood enable

- fast-flood enable

- fast-flood enable

- fast-flood interval

- fast-flood interval

- fast-flood interval

- fast-reload

- fast-reroute

- fast-reroute backup-prot-preempt optimize-bw

- feature-set

- feature-set

- feature

- feature bash-shell

- feature bfd

- feature bgp

- feature catena

- feature dhcp

- feature eigrp

- feature evb

- feature evmed

- feature glbp

- feature hsrp

- feature icam

- feature imp

- feature interface-vlan

- feature isis

- feature lacp

- feature ldap

- feature lldp

- feature macsec

- feature mpls evpn

- feature mpls l3vpn

- feature mpls ldp

- feature mpls oam

- feature mpls segment-routing

- feature mpls static

- feature mpls traffic-engineering

- feature msdp

- feature mvpn

- feature nat

- feature nbm

- feature ngoam

- feature ntp

- feature nv overlay

- feature nxapi

- feature nxdb

- feature nxsdk

- feature openflow

- feature ospf

- feature ospfv3

- feature password encryption aes

- feature pbr

- feature pim

- feature plb

- feature poap

- feature pong

- feature port-security

- feature privilege

- feature ptp

- feature rip

- feature rise

- feature scheduler

- feature scp-server

- feature sflow

- feature sftp-server

- feature smart-channel

- feature ssh

- feature tacacs

- feature telemetry

- feature telnet

- feature tunnel

- feature udld

- feature vmtracker

- feature vn-segment-vlan-based

- feature vpc

- feature vrrp

- feature vrrpv3

- feature vtp

- fec

- fex

- fex associate

- fex management-instance fabric

- fex pinning redistribute

- fhrp delay minimum

- fhrp delay reload

- filesys delete

- filter

- filter access-group

- filter ipv6 access-group

- filter out

- find

- fips debug errors debug

- fips mode enable

- flow exporter

- flow forward

- flow monitor

- flow record

- flow timeout

- flow timeout active

- flow timeout aggressive threshold

- flow timeout fast threshold

- flow timeout inactive

- flow timeout session

- flowcontrol hardware

- flush-routes

- flush-routes

- flush-routes

- flush-routes

- flush-routes

- flush-routes

- follow

- forceshut reset-reason

- format bootflash

- format bootflash check-filesystem

- format usb1

- format usb2

- forward

- forwarder preempt

- forwarding-adjacency

- fragments

- frequency

- from to

- from to

fabric-interface

fabric-interface <ifname> | no fabric-interface <ifname>

Syntax Description

no

Negate a command or set its defaults

fabric-interface

Fabric interface to use

ifname

Interface Name

Command Mode

- /exec/configure/if-remote-ethernet /exec/configure/if-eth-base /exec/configure/if-ethernet-all handle auto 619

fabric-soo

[no] fabric-soo { <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-soo

Fabric Site of Origin

ext-comm-soo-aa4nn2

VPN extcommunity in aa4:fabric_id format

ext-comm-soo-aa2nn4

VPN extcommunity in aa:fabric_id format

Command Mode

- /exec/configure/router-bgp

fabric database auto-pull dci vrf node-id

fabric database auto-pull dci vrf <vrf-name> node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

dci

DCI profile

vrf

Display per-VRF information

vrf-name

VRF name

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

Command Mode

- /exec

fabric database auto-pull vni interface

fabric database auto-pull { vni <vni-id> | dot1q <vlan-id> } interface <interface-id> [ { overwrite-vlan | overwrite-bd } <ow-vlan-id> ]

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

vni

Pull ethernet-tag vni configuration

vni-id

dot1q

Pull ethernet-tag dot1q configuration

vlan-id

interface

Applied interface

interface-id

Name of interface

overwrite-vlan

(Optional) Overwrite the system generate vlan

overwrite-bd

(Optional) Overwrite the system generate bd

ow-vlan-id

(Optional)

Command Mode

- /exec

fabric database inherit-profile-map

{ fabric database inherit-profile-map <id> } | { no fabric database inherit-profile-map }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

inherit-profile-map

Inherit a profile map. All non-global mappings will be inherited.

id

Profile Map ID

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-port-channel

fabric database mobility-domain

[no] fabric database mobility-domain <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

mobility-domain

Tag to identify mobility domain name

name

Mobility Domain Name

Command Mode

- /exec/configure

fabric database override-profile

[no] fabric database override-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-profile

Override the network profile name

profilename

Enter the profile name to override network profile

Command Mode

- /exec/configure

fabric database override-vrf-profile

[no] fabric database override-vrf-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-vrf-profile

Override the VRF (partition) profile name

profilename

Enter the profile name to override VRF profile

Command Mode

- /exec/configure

fabric database profile-map

[no] fabric database profile-map <id>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

id

Profile Map ID

Command Mode

- /exec/configure

fabric database profile-map global

[no] fabric database profile-map global

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

global

Global profile (apply to all interfaces)

Command Mode

- /exec/configure

fabric database refresh dot1q

fabric database refresh dot1q <vlan-id> [ { mobility-domain <name> | interface <interface-id> } ]

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

dot1q

Dot1Q Encapsulation

vlan-id

interface

(Optional) Applied interface

interface-id

(Optional) Name of interface

mobility-domain

(Optional) Tag to identify mobility domain name

name

(Optional) Mobility Domain Name

Command Mode

- /exec

fabric database refresh vni

fabric database refresh { vni <vni-id> | include-vrf { <vrf-name> } }

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

vni

Virtual Network Identifier

vni-id

include-vrf

Include VRF name

vrf-name

VRF name

Command Mode

- /exec

fabric database timer

[no] fabric database timer { cleanup | recovery | vdp | re-add } <timeout>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

database

timer

HMM timers

cleanup

Delay in minutes before profile is deleted

recovery

Delay in minutes before recovered profile is deleted

vdp

Delay in minutes before new VDP requests (after un-apply) are accepted

re-add

Delay in minutes before new client requests (after un-apply) are accepted

timeout

Set timeout in minutes

Command Mode

- /exec/configure

fabric database type bl-dci

[no] fabric database type bl-dci

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

bl-dci

Border Leaf - DCI

Command Mode

- /exec/configure

fabric database type cabling

[no] fabric database type cabling

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

cabling

Cable Management Database

Command Mode

- /exec/configure

fabric database type network

[no] fabric database type network

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

network

Network Database

Command Mode

- /exec/configure

fabric database type partition

[no] fabric database type partition

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

partition

Partition Database

Command Mode

- /exec/configure

fabric database type profile

[no] fabric database type profile

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

profile

Port or Switch Profile Database

Command Mode

- /exec/configure

fabric forwarding anycast-gateway-mac

{ fabric forwarding anycast-gateway-mac <mac-addr> } | { no fabric forwarding anycast-gateway-mac }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

anycast-gateway-mac

Anycast Gateway MAC of the Switch

mac-addr

MAC address

Command Mode

- /exec/configure

fabric forwarding dup-host-ip-addr-detection

{ fabric forwarding dup-host-ip-addr-detection <mmoves> <nsecs> | no fabric forwarding dup-host-ip-addr-detection }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-ip-addr-detection

To detect duplicate host address in n secs

mmoves

Set Number of host moves to be allowed in n secs. Default is 5

nsecs

Set the duplicate detection timeout in secs for host moves. Default is 180

Command Mode

- /exec/configure

fabric forwarding dup-host-recovery-timer recover-count

{ fabric forwarding dup-host-recovery-timer <timeout> recover-count <count> | no fabric forwarding dup-host-recovery-timer }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-recovery-timer

Refresh the frozen duplicate host

timeout

Set the timeout in secs to refresh the duplicate host. Default is 30 secs

recover-count

Maximum number of refreshes

count

Set the maximum number of host refresh. Default is 5.

Command Mode

- /exec/configure

fabric forwarding limit-vlan-mac

[no] fabric forwarding limit-vlan-mac <max-limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

limit-vlan-mac

Maximum number of end-hosts allowed to have the same (vlan, MAC) mapping in a given vrf (Default is 2048)

max-limit

Set max-limit

Command Mode

- /exec/configure

fabric forwarding mode anycast-gateway

{ fabric forwarding mode anycast-gateway } | { no fabric forwarding mode }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

mode

Forwarding Modes

anycast-gateway

Anycast Gateway Forwarding Mode

Command Mode

- /exec/configure/if-vlan /exec/configure/if-vlan-range

fabric forwarding selective-host-probe

[no] fabric forwarding selective-host-probe

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

selective-host-probe

Trigger unconditional host probe

Command Mode

- /exec/configure

fabricpath domain

[no] fabricpath domain <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Data Center Intermediate System to Intermediate System (L2MP-IS-IS)

domain

Fabricpath IS-IS domain

tag

Process tag

Command Mode

- /exec/configure/if-vlan

fabricpath domain default

fabricpath domain default

Syntax Description

fabricpath

Configure fabricpath global commands

domain

Enter fabricpath IS-IS domain configuration mode

default

default fabricpath domain

Command Mode

- /exec/configure

fabricpath dynamic switch-id

{ fabricpath dynamic switch-id <switch-id-value> }

Syntax Description

fabricpath

fabricpath configuration

dynamic

Dynamically configured switch-id

switch-id

Dynamically configured switch-id

switch-id-value

switch-id-value

Command Mode

- /exec/configure

fabricpath force link-bringup

fabricpath force link-bringup

Syntax Description

fabricpath

fabricpath information

force

Force link merge

link-bringup

Force link merge

Command Mode

- /exec

fabricpath graceful-merge disable

{ fabricpath graceful-merge disable } | { no fabricpath graceful-merge disable }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

graceful-merge

Graceful merging of netwoks

disable

Disable graceful merge of networks

Command Mode

- /exec/configure

fabricpath isis authentication-check

[no] fabricpath isis authentication-check

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

authentication-check

Check authentication on received hellos

Command Mode

- /exec/configure/if-switching

fabricpath isis authentication-type cleartext

{ fabricpath isis authentication-type { cleartext | md5 } | no fabricpath isis authentication-type [ { cleartext | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

authentication-type

Set hello authentication type

cleartext

Cleartext

md5

HMAC-MD5

Command Mode

- /exec/configure/if-switching

fabricpath isis authentication key-chain

{ fabricpath isis authentication key-chain <auth-keychain> | no fabricpath isis authentication key-chain [ <auth-keychain> ] }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

authentication

Set hello authentication keychain

key-chain

Set hello authentication keychain

auth-keychain

authentication keychain

Command Mode

- /exec/configure/if-switching

fabricpath isis csnp-interval

[no] fabricpath isis csnp-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

csnp-interval

Set CSNP interval in seconds

sec

CSNP interval value

Command Mode

- /exec/configure/if-switching

fabricpath isis event-history adjacency

[no] fabricpath isis event-history adjacency [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

adjacency

Adjacency events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history cli

[no] fabricpath isis event-history cli [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

cli

CLI events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history csnp

[no] fabricpath isis event-history csnp [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

csnp

CSNP events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history drap

[no] fabricpath isis event-history drap [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

drap

DRAP events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history events

[no] fabricpath isis event-history events [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

events

Message and high-level events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history graceful

[no] fabricpath isis event-history graceful [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

graceful

Graceful Restart events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history ha

[no] fabricpath isis event-history ha [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

ha

High-Availability events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history iih

[no] fabricpath isis event-history iih [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

iih

Interface hello events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history lsp-flood

[no] fabricpath isis event-history lsp-flood [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

lsp-flood

LSP-flood events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history lsp-gen

[no] fabricpath isis event-history lsp-gen [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

lsp-gen

LSP-Gen events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history m2rib

[no] fabricpath isis event-history m2rib [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

m2rib

M2rib events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history mccast

[no] fabricpath isis event-history mccast [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

mccast

Mccast events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history psnp

[no] fabricpath isis event-history psnp [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

psnp

PSNP events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history redist

[no] fabricpath isis event-history redist [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

redist

Redistribution events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history spf-leaf

[no] fabricpath isis event-history spf-leaf [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

spf-leaf

Shortest path first events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history spf-tree

[no] fabricpath isis event-history spf-tree [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

spf-tree

SPF-Tree events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis event-history urib

[no] fabricpath isis event-history urib [ { size { <size_in_text> | <size_in_kbytes> } } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

event-history

Configure event-history buffers

urib

URIB events

size

(Optional) Configure size

size_in_text

(Optional) Buffer size

size_in_kbytes

(Optional) Size in kbytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis fabric-control

[no] fabricpath isis fabric-control

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

fabric-control

Set interface to fabric-control svi

Command Mode

- /exec/configure/if-vlan

fabricpath isis hello-interval

[no] fabricpath isis hello-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

hello-interval

Set Hello interval in seconds

sec

Hello interval value

Command Mode

- /exec/configure/if-switching

fabricpath isis hello-multiplier

[no] fabricpath isis hello-multiplier <multi>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

hello-multiplier

Set multiplier for Hello holding time

multi

Hello multiplier value

Command Mode

- /exec/configure/if-switching

fabricpath isis hello-padding

{ fabricpath isis hello-padding | no fabricpath isis hello-padding [ always ] }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

hello-padding

Pad IS-IS hello PDUs to full MTU

always

(Optional) Pad every hello

Command Mode

- /exec/configure/if-switching

fabricpath isis hello-padding always

fabricpath isis hello-padding always

Syntax Description

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

hello-padding

Pad IS-IS hello PDUs to full MTU

always

Pad every hello

Command Mode

- /exec/configure/if-switching

fabricpath isis lsp-interval

[no] fabricpath isis lsp-interval <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

lsp-interval

Set LSP transmission interval

msec

LSP transmission interval (milliseconds)

Command Mode

- /exec/configure/if-switching

fabricpath isis mesh-group

{ fabricpath isis mesh-group { blocked | <mesh-id> } | no fabricpath isis mesh-group [ { blocked | <mesh-id> } ] }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

mesh-group

Set IS-IS mesh group

mesh-id

Mesh group number

blocked

Block LSPs on this interface

Command Mode

- /exec/configure/if-switching

fabricpath isis metric

[no] fabricpath isis metric <metric>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

metric

Configure the metric for interface

metric

Default metric

Command Mode

- /exec/configure/if-switching /exec/configure/if-any/if-fp-topology

fabricpath isis mtu-check

[no] fabricpath isis mtu-check

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

mtu-check

Check mtu on received hellos, if its padded

Command Mode

- /exec/configure/if-switching

fabricpath isis retransmit-interval

[no] fabricpath isis retransmit-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

retransmit-interval

Set per-LSP retransmission interval

sec

Interval between retransmissions of the same LSP (seconds)

Command Mode

- /exec/configure/if-switching

fabricpath isis retransmit-throttle-interval

[no] fabricpath isis retransmit-throttle-interval <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

retransmit-throttle-interval

Set interface LSP retransmission interval

msec

Delay between retransmitted LSPs (milliseconds)

Command Mode

- /exec/configure/if-switching

fabricpath isis test add

fabricpath isis test { ip | ipv6 | mac } { add | del } <vlan-id> { <v4-source> <v4-group> | <v6-source> <v6-group> | <mac-source> <mac-group> }

Syntax Description

fabricpath

Configure fabricpath global commands

isis

Fabricpath IS-IS global commands

test

Test command for IPV6/MAC/IP

ipv6

Display IS-IS IPv6 information

ip

Display IS-IS IPv4 information

mac

Display IS-IS MAC information

add

Add IPV4/V6 route

del

Delete IPV4/V6 route

vlan-id

Display IS-IS VLAN information

v4-source

Display single IP redistribute route

v4-group

Display single IP redistribute route

mac-source

Display single MAC redistribute route

mac-group

Display single MAC redistribute route

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fabricpath isis topology

[no] fabricpath isis topology <topo-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

isis

Fabricpath IS-IS interface commands

topology

Enable topology on interface

topo-id

Topology ID

Command Mode

- /exec/configure/if-switching /exec/configure/if-p2p

fabricpath load-balance

[no] fabricpath load-balance { source | source-destination | xor | destination | symmetric }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

load-balance

Configure load-balancing parameters

source

Include source parameters

source-destination

Include source and destination parameters

xor

Include ex-or of source and destination parameters. This option defaults to symmetric control in F2 modules.

destination

Include destination parameters

symmetric

Symmetric (default)

Command Mode

- /exec/configure

fabricpath load-balance multicast

[no] fabricpath load-balance multicast { [ { source | source-destination | xor | destination | symmetric } ] [ rotate-amount <rot_amt> ] [ include-vlan ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

load-balance

Configure load-balancing parameters

multicast

Multicast

source

(Optional) Include source parameters

source-destination

(Optional) Include source and destination parameters

xor

(Optional) Include ex-or of source and destination parameters.This option defaults to symmetric control in F2 modules.

destination

(Optional) Include destination parameters

symmetric

(Optional) Symmetric (default)

rotate-amount

(Optional) Rotate amount for hash string

rot_amt

(Optional) in bytes (hex)

include-vlan

(Optional) Use vlan

Command Mode

- /exec/configure

fabricpath load-balance unicast

[no] fabricpath load-balance unicast { [ { source | source-destination | xor | destination | symmetric } ] [ { layer3 | layer4 | mixed } ] [ rotate-amount <rot_amt> ] [ include-vlan ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

load-balance

Configure load-balancing parameters

unicast

Unicast

source

(Optional) Include source parameters

source-destination

(Optional) Include source and destination parameters

xor

(Optional) Include ex-or of source and destination parameters.This option defaults to symmetric control in F2 modules.

destination

(Optional) Include destination parameters

symmetric

(Optional) Symmetric (default)

layer3

(Optional) Only Layer-3 parameters considered

layer4

(Optional) Only Layer-4 parameters considered

mixed

(Optional) Mix of Layer-3 and Layer-4 paramaters (default)

rotate-amount

(Optional) Rotate amount for hash string

rot_amt

(Optional) in bytes (hex)

include-vlan

(Optional) Use vlan

Command Mode

- /exec/configure

fabricpath multicast aggregate-routes

{ no fabricpath multicast aggregate-routes | fabricpath multicast aggregate-routes [ exclude <ftag-ids> ] }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

multicast

Configure multicast information

aggregate-routes

Program specific routes for broadcast/multicast trees

exclude

(Optional) don't aggregate routes for these ftags

ftag-ids

(Optional) range of ftag ids for the trees

Command Mode

- /exec/configure

fabricpath multicast load-balance

fabricpath multicast load-balance | no fabricpath multicast load-balance

Syntax Description

no

Negate a command or set its defaults

fabricpath

Configuration for a fabricpath network

multicast

Configuration pertaining to all multi-destination packets

load-balance

Make both vPC peers as partial designated forwarders when possible

Command Mode

- /exec/configure/vpc-domain

fabricpath switch-id

fabricpath switch-id <es_id> | no fabricpath switch-id [ <es_id> ]

Syntax Description

no

Negate a command or set its defaults

fabricpath

Configuration for a fabricpath network

switch-id

Configure the fabricpath switch ID

es_id

Fabricpath Switch ID

Command Mode

- /exec/configure/vpc-domain

fabricpath switch-id

{ fabricpath switch-id <switch-id-value> } | { no fabricpath switch-id }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

switch-id

Statically configured switch-id

switch-id-value

switch-id-value

Command Mode

- /exec/configure

fabricpath timers allocate-delay

{ fabricpath timers allocate-delay <timer-value> } | { no fabricpath timers allocate-delay }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

timers

fabricpath switch-id timers

allocate-delay

Time delay new resource propagation

timer-value

timer value in seconds

Command Mode

- /exec/configure

fabricpath timers linkup-delay

{ fabricpath timers linkup-delay <timer-value> } | { no fabricpath timers linkup-delay }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

timers

fabricpath switch-id timers

linkup-delay

Time delay for link bringup for detecting conflicts

timer-value

timer value in seconds

Command Mode

- /exec/configure

fabricpath timers transition-delay

{ fabricpath timers transition-delay <timer-value> } | { no fabricpath timers transition-delay }

Syntax Description

no

Negate a command or set its defaults

fabricpath

fabricpath configuration

timers

fabricpath switch-id timers

transition-delay

Time delay transitiond value propagation

timer-value

timer value in seconds

Command Mode

- /exec/configure

fabricpath topology-member

{ fabricpath topology-member <tpg-id> } | { no fabricpath topology-member <tpg-id> }

Syntax Description

no

Negate a command or set its defaults

fabricpath

Configure fabricpath topology

topology-member

Set interface's fabricpath topology membership

tpg-id

Fabricpath Topology ID 1-63

Command Mode

- /exec/configure/if-switching

fabricpath topology

{ fabricpath topology <tpg-id> } | { no fabricpath topology <tpg-id> }

Syntax Description

no

Negate a command or set its defaults

fabricpath

Configure fabricpath topology

topology

Configure fabricpath topology

tpg-id

Fabricpath Topology ID 1-63

Command Mode

- /exec/configure

fabricpath unicast route

[no] fabricpath unicast route { local { ftag <ftag> swid <switchid> [ sswid <subswitchid> ] | ES ftag <ftag> swid <switchid> } | remote { ftag <ftag> swid <switchid> [ sswid <subswitchid> ] nhif <nhifid_range> | IIC ftag <ftag> swid <switchid> [ sswid <subswitchid> ] nhif <nhifid> | ESSSW ftag <ftag> swid <switchid> sswid <subswitchid> nhif <nhifid> | INVRT ftag <ftag> swid <switchid> sswid <subswitchid> nhif <nhifid> } [ dist <dist> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabricpath

fabricpath configuration

unicast

Unicast

route

route

local

local route

ES

Program as ES route

remote

remote route

IIC

Program as IIC route

ESSSW

Program as ES-SSW route

INVRT

Program as inverse route

ftag

FTAG for route

ftag

FTAG for route (hex)

swid

Switch ID for route

switchid

Route switchid (hex)

sswid

(Optional) Sub-switch ID for route

subswitchid

(Optional) Route sub-switch id (hex)

nhif

Next hop interface

nhifid_range

Next hop interface range

nhifid

Next hop interface

dist

(Optional) Specify metric for route (defaults to 100)

dist

(Optional) Administration distance for route

Command Mode

- /exec/configure

failaction

[no] failaction { [ node { reassign | drop } ] | [ cluster drop ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

failaction

ITD failaction

node

(Optional) ITD failaction node

reassign

(Optional) ITD failaction reassign

drop

(Optional) ITD failaction drop

cluster

(Optional) ITD failaction cluster

Command Mode

- /exec/configure/itd

failaction

[no] failaction { [ node { reassign | drop | least-bucket } ] | [ bucket { distribute } ] | [ cluster drop ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

failaction

ITD failaction

node

(Optional) ITD failaction node

reassign

(Optional) ITD failaction reassign

drop

(Optional) ITD failaction drop

least-bucket

(Optional) ITD failaction least-bucket node

bucket

(Optional) ITD failaction bucket reassign

distribute

(Optional) ITD failaction distribute reassign

cluster

(Optional) ITD failaction cluster

Command Mode

- /exec/configure/itd

fast-convergence

[no] fast-convergence

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-convergence

Configure vPC fast convergence

Command Mode

- /exec/configure/vpc-domain

fast-external-fallover

[no] fast-external-fallover

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-external-fallover

Immediately reset the session if the link to a directly connected BGP peer goes down

Command Mode

- /exec/configure/router-bgp

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

fast-reload

fast-reload { [ nxos <uri> | trigger-gr | save-config | [ non-interruptive | nosrg ] ] + | force-all [ nxos <uri> ] + } [ override ]

Syntax Description

fast-reload

fast-reload software

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

non-interruptive

(Optional) Non-Interruptive image upgrade

nosrg

(Optional) nosrg

override

(Optional) Do fast-reload without impact check

trigger-gr

(Optional) Enable BGP GR for compatible peers

save-config

(Optional) Save running-config to startup-config before fast-reload

force-all

Force upgrade the system

Command Mode

- /exec

fast-reroute

[no] fast-reroute | fast-reroute [ node-protect | bw-protect ] +

Syntax Description

no

Negate a command or set its defaults

fast-reroute

Specify mpls tunnel can be fast-rerouted

node-protect

(Optional) node protection desired

bw-protect

(Optional) bandwidth protection desired

Command Mode

- /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

fast-reroute backup-prot-preempt optimize-bw

[no] fast-reroute backup-prot-preempt optimize-bw | no fast-reroute timers promotion | fast-reroute timers promotion <seconds>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-reroute

fast-reroute parameters

backup-prot-preempt

Preemption algorithm for backup tunnels

optimize-bw

Reduce bandwidth wastage (default: minimize LSPs preempted)

timers

configure fast-reroute timer

promotion

Configure how often we scan for LSP backup promotion

seconds

seconds between promotions (0 disables promotion.)

Command Mode

- /exec/configure/te

feature-set

feature-set <fs>

Syntax Description

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

- /exec/configure

feature-set

[no] feature-set <fs>

Syntax Description

no

Negate a command or set its defaults

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

- /exec/configure

feature

[no] feature <arg1>

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Feature name

arg1

Enter feature name

Command Mode

- /exec/configure/rolefeaturegrp

feature bash-shell

[no] feature bash-shell

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bash-shell

Enable/Disable bash-shell

Command Mode

- /exec/configure

feature bfd

[no] feature bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bfd

bfd

Command Mode

- /exec/configure

feature bgp

[no] feature bgp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bgp

Enable/Disable Border Gateway Protocol (BGP)

Command Mode

- /exec/configure

feature catena

[no] feature catena

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

catena

Enable/Disable catena

Command Mode

- /exec/configure

feature dhcp

[no] feature dhcp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

dhcp

Enable/Disable DHCP Manager

Command Mode

- /exec/configure

feature eigrp

[no] feature eigrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

eigrp

Enable/Disable Enhanced Interior Gateway Routing Protocol (EIGRP)

Command Mode

- /exec/configure

feature evb

[no] feature evb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evb

Enable/Disable Edge Virtual Bridge (EVB)

Command Mode

- /exec/configure

feature evmed

[no] feature evmed

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evmed

Enable/Disable Generic event detectors

Command Mode

- /exec/configure

feature glbp

[no] feature glbp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

glbp

Enable/Disable Gateway Load Balancing Protocol (GLBP)

Command Mode

- /exec/configure

feature hsrp

[no] feature hsrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

hsrp

Enable/Disable Hot Standby Router Protocol (HSRP)

Command Mode

- /exec/configure

feature icam

[no] feature icam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

icam

Enable/Disable icam

Command Mode

- /exec/configure

feature imp

[no] feature imp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

imp

Enable/Disable IMP

Command Mode

- /exec/configure

feature interface-vlan

[no] feature interface-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

interface-vlan

Enable/Disable interface vlan

Command Mode

- /exec/configure

feature isis

[no] feature isis

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

isis

Enable/Disable IS-IS Unicast Routing Protocol (IS-IS)

Command Mode

- /exec/configure

feature lacp

[no] feature lacp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lacp

Enable/Disable LACP

Command Mode

- /exec/configure

feature ldap

[no] feature ldap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ldap

Enable/Disable ldap

Command Mode

- /exec/configure

feature lldp

[no] feature lldp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lldp

Enable/Disable LLDP

Command Mode

- /exec/configure

feature macsec

[no] feature macsec

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

macsec

Enable/Disable CTS

Command Mode

- /exec/configure

feature mpls evpn

[no] feature mpls evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

evpn

Enable MPLS EVPN

Command Mode

- /exec/configure

feature mpls l3vpn

[no] feature mpls l3vpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

l3vpn

Enable/Disable Layer 3 Virtual Private Networks

Command Mode

- /exec/configure

feature mpls ldp

[no] feature mpls ldp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

ldp

Enable/Disable Label Distribution Protocol

Command Mode

- /exec/configure

feature mpls oam

[no] feature mpls oam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

oam

Enable MPLS OAM

Command Mode

- /exec/configure

feature mpls segment-routing

[no] feature mpls segment-routing

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

segment-routing

Enable Segment-routing

Command Mode

- /exec/configure

feature mpls static

[no] feature mpls static

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

static

Enable/Disable Static Labeled Paths

Command Mode

- /exec/configure

feature mpls traffic-engineering

[no] feature mpls traffic-engineering

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

traffic-engineering

Enable/Disable MPLS Traffic Engineering

Command Mode

- /exec/configure

feature msdp

[no] feature msdp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

msdp

Enable/Disable Multicast Source Discovery Protocol (MSDP)

Command Mode

- /exec/configure

feature mvpn

[no] feature mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mvpn

Multicast Virtual Private Networks.

Command Mode

- /exec/configure

feature nat

[no] feature nat

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nat

Enable/Disable NAT

Command Mode

- /exec/configure

feature nbm

[no] feature nbm

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable a feature

nbm

Enable/Disable Non Blocking Multicast (NBM) feature

Command Mode

- /exec/configure

feature ngoam

[no] feature ngoam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngoam

Enable/Disable ngoam

Command Mode

- /exec/configure

feature ntp

[no] feature ntp

Syntax Description

no

(Optional) Negate a command or set its default

feature

Command to enable/disable features

ntp

Enable/Disable NTP

Command Mode

- /exec/configure

feature nv overlay

[no] feature nv overlay

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nv

Enable/Disable VxLAN

overlay

Enable/Disable VxLAN

Command Mode

- /exec/configure

feature nxapi

[no] feature nxapi

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxapi

Enable/Disable nxapi

Command Mode

- /exec/configure

feature nxdb

[no] feature nxdb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxdb

Enable/Disable nxdb

Command Mode

- /exec/configure

feature nxsdk

[no] feature nxsdk

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxsdk

Enable/Disable nxsdk Services

Command Mode

- /exec/configure

feature openflow

[no] feature openflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

openflow

Enable/Disable OpenFlow agent

Command Mode

- /exec/configure

feature ospf

[no] feature ospf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospf

Enable/Disable Open Shortest Path First Protocol (OSPF)

Command Mode

- /exec/configure

feature ospfv3

[no] feature ospfv3

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospfv3

Enable/Disable Open Shortest Path First Version 3 Protocol (OSPFv3)

Command Mode

- /exec/configure

feature password encryption aes

[no] feature password encryption aes

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Enable the feature

password

Credential(s) for the user(s)/device(s)

encryption

Strong encryption for credential(s)

aes

Encrypt using AES encryption standard

Command Mode

- /exec/configure

feature pbr

[no] feature pbr

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pbr

Enable/Disable Policy Based Routing(PBR)

Command Mode

- /exec/configure

feature pim

[no] feature pim

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pim

Enable/Disable Protocol Independent Multicast (PIM)

Command Mode

- /exec/configure

feature plb

[no] feature plb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

plb

Enable/Disable Pervasive Load Balancing feature

Command Mode

- /exec/configure

feature poap

[no] feature poap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

poap

Enable/Disable POAP

Command Mode

- /exec/configure

feature pong

[no] feature pong

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pong

Enable/Disable Pong

Command Mode

- /exec/configure

feature port-security

[no] feature port-security

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable eth port security features

port-security

Enable/Disable port-security

Command Mode

- /exec/configure

feature privilege

[no] feature privilege

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

privilege

Enable/Disable IOS type privilege level support

Command Mode

- /exec/configure

feature ptp

[no] feature ptp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ptp

Enable/Disable PTP

Command Mode

- /exec/configure

feature rip

[no] feature rip

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

rip

Enable/Disable Routing Information Protocol (RIP)

Command Mode

- /exec/configure

feature rise

[no] feature rise

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

rise

Enable/Disable RISE

Command Mode

- /exec/configure

feature scheduler

[no] feature scheduler

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scheduler

Enable/Disable scheduler

Command Mode

- /exec/configure

feature scp-server

[no] feature scp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scp-server

Enable/Disable SCP server

Command Mode

- /exec/configure

feature sflow

[no] feature sflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sflow

Enable/Disable sFlow agent

Command Mode

- /exec/configure

feature sftp-server

[no] feature sftp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sftp-server

Enable/Disable SFTP server

Command Mode

- /exec/configure

feature smart-channel

[no] feature smart-channel

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

smart-channel

Enable/Disable smart-channel

Command Mode

- /exec/configure

feature ssh

[no] feature ssh

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ssh

Enable/Disable ssh

Command Mode

- /exec/configure

feature tacacs

[no] feature tacacs +

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

Command Mode

- /exec/configure

feature telemetry

[no] feature telemetry

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telemetry

Enable/Disable Telemetry

Command Mode

- /exec/configure

feature telnet

[no] feature telnet

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telnet

Enable/Disable telnet

Command Mode

- /exec/configure

feature tunnel

[no] feature tunnel

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

tunnel

Enable/Disable Tunnel Manager

Command Mode

- /exec/configure

feature udld

[no] feature udld

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

udld

Enable/Disable UDLD

Command Mode

- /exec/configure

feature vmtracker

[no] feature vmtracker

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vmtracker

Enable/Disable VM Tracker feature

Command Mode

- /exec/configure

feature vn-segment-vlan-based

[no] feature vn-segment-vlan-based

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vn-segment-vlan-based

Enable/Disable VLAN based VN segment

Command Mode

- /exec/configure

feature vpc

[no] feature vpc

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vpc

Enable/Disable VPC (Virtual Port Channel)

Command Mode

- /exec/configure

feature vrrp

[no] feature vrrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vrrp

Enable/Disable Virtual Router Redundancy Protocol (VRRP)

Command Mode

- /exec/configure

feature vrrpv3

[no] feature vrrpv3

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vrrpv3

Enable/Disable Virtual Router Redundancy Protocol (VRRP) version 3

Command Mode

- /exec/configure

feature vtp

[no] feature vtp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vtp

Enable/Disable VTP

Command Mode

- /exec/configure

fec

fec <fec_val> | no fec [ <fec_val> ]

Syntax Description

no

Negate a command or set its defaults

fec

Forwarding error correction

fec_val

Interface FEC options

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

fex

[no] fex <chas_no>

Syntax Description

no

(Optional) Negate the command

fex

FEX configuration

chas_no

FEX number

Command Mode

- /exec/configure

fex associate

fex associate <chassis_no> [ chassis-serial <serial_no> [ module-serial <mod_serial> ] [ module-slot { left | right } ] ] | no fex associate [ <chassis_no> ]

Syntax Description

no

Negate a command or set its defaults

fex

Configure FEX fabric

associate

Associate the port to a FEX

chassis_no

FEX number

chassis-serial

(Optional) Chassis serial number

serial_no

(Optional) Serial number

module-serial

(Optional) Module serial number

mod_serial

(Optional) Module serial number

module-slot

(Optional) Module Slot

left

(Optional) Left IO module slot

right

(Optional) Right IO module slot

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-port-channel

fex management-instance fabric

fex management-instance <inst> fabric <fabric_no> | no fex management-instance

Syntax Description

no

Negate a command or set its defaults

fex

FEX configuration

management-instance

Management instance configuration

inst

Management Instance

fabric

Left fabric or Right fabric

fabric_no

Fabric number

Command Mode

- /exec/configure handle auto 619

fex pinning redistribute

fex pinning redistribute <rchas_id>

Syntax Description

fex

FEX control commands

pinning

Pinning redistribution

redistribute

Redistribute FEX ports to fabric ports

rchas_id

FEX number

Command Mode

- /exec

fhrp delay minimum

[no] fhrp delay minimum | fhrp delay minimum <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

minimum

minimum delay

delay

Seconds to delay

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan

fhrp delay reload

[no] fhrp delay reload | fhrp delay reload <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

reload

reload delay

delay

Seconds to delay

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan

filesys delete

filesys delete <s0>

Syntax Description

filesys

file system command

delete

delete a file on file system

s0

file name

Command Mode

- /exec

filter

[no] filter [ subject-name <s0> | altname-email <s1> | altname-upn <s2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Configure mapping filter

subject-name

(Optional) Subject name of the certificate

s0

(Optional) Subject name

altname-email

(Optional) Email id as an alternate name

s1

(Optional) Email id

altname-upn

(Optional) User principal name as an alternate name

s2

(Optional) User principal name

Command Mode

- /exec/configure/certmap-filter

filter access-group

[no] filter access-group <acl-name> [ allow-sharing ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

access-group

access control group

acl-name

access control list name

allow-sharing

(Optional) allow up to 4 access control groups on same source interface

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter ipv6 access-group

[no] filter ipv6 access-group <acl-name> [ allow-sharing ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

ipv6

ipv6 access group

access-group

access control group

acl-name

access control list name

allow-sharing

(Optional) allow up to 4 access control groups on same source interface

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter out

[ no | default ] { filter-list <fltrlist-name> } { out | in }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

filter-list

Apply AS-PATH filter-list

fltrlist-name

Name of filter-list

out

Apply policy to outgoing routes

in

Apply policy to incoming routes

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

find

find <s0>

Syntax Description

find

Find a file below the current directory

s0

Enter the filename prefix to search

Command Mode

- /exec

fips debug errors debug

[no] fips debug errors { debug-lc-post-on-maint | reset-debug-lc-post-on-maint }

Syntax Description

no

(Optional) Negate a command or set its defaults

fips

Enable/Disable FIPS mode

debug

Introduce errors into FIPS tests

errors

Introduce errors

debug-lc-post-on-maint

Run the switch on debug mode for fips maintenance state

reset-debug-lc-post-on-maint

Reset the mode from debug-lc-post-on-maint

Command Mode

- /exec/

fips mode enable

[no] fips mode enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fips

Enable/Disable FIPS mode

mode

FIPS mode

enable

Enable/Disable FIPS mode

Command Mode

- /exec/configure

flow exporter

[no] flow exporter <exportername>

Syntax Description

flow

Enable/Disable NetFlow configuration

exporter

Define a Flow Exporter

exportername

Name of Flow Exporter

Command Mode

- /exec/configure

flow forward

[no] flow { forward | reverse }

Syntax Description

no

(Optional) Negate a command or set its defaults

flow

Configure ngoam flow

forward

Ngoam forward flow

reverse

Ngoam reverse flow

Command Mode

- /exec/configure/configngoamprofile

flow monitor

[no] flow monitor <monitorname>

Syntax Description

flow

Enable/Disable NetFlow configuration

monitor

Define a Flow Monitor

monitorname

Name of Flow Monitor

Command Mode

- /exec/configure

flow record

[no] flow record <recordname>

Syntax Description

flow

Enable/Disable NetFlow configuration

record

Define a Flow Record

recordname

Record name

Command Mode

- /exec/configure

flow timeout

{ [ no ] flow timeout <time> | no flow timeout }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

time

Time in seconds (flush-cache-Only for F2 cards)

Command Mode

- /exec/configure

flow timeout active

{ [ no ] flow timeout active <time> | no flow timeout active }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

active

Active or long timeout

time

Time in seconds

Command Mode

- /exec/configure

flow timeout aggressive threshold

{ [ no ] flow timeout aggressive threshold <percentage> | no flow timeout aggressive }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

aggressive

Aggressive aging

threshold

Threshold to start the aggressive aging

percentage

Percentage of NetFlow Table full

Command Mode

- /exec/configure

flow timeout fast threshold

{ [ no ] flow timeout fast <time> threshold <packets> | no flow timeout fast }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

fast

Fast aging timeout

time

Time in seconds

threshold

Threshold to start fast aging

packets

Number of packets in flow before timeout for the flow to not expire

Command Mode

- /exec/configure

flow timeout inactive

{ [ no ] flow timeout inactive <time> | no flow timeout inactive }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

inactive

inactive or normal timeout

time

Time in seconds

Command Mode

- /exec/configure

flow timeout session

[no] flow timeout session

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

session

Enable TCP session aging

Command Mode

- /exec/configure

flowcontrol hardware

[no] flowcontrol hardware

Syntax Description

no

(Optional) Negate a command or set its defaults

flowcontrol

Set flow control

hardware

Set hardware flowcontrol

Command Mode

- /exec/configure/com1

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

- /exec/configure/router-eigrp

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

- /exec/configure/router-rip

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

- /exec/configure/router-ospf

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on non-graceful controlled restart

Command Mode

- /exec/configure/router-isis

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

- /exec/configure/router-ospf3

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB upon controlled restart

Command Mode

- /exec/configure/router-bgp

follow

follow <name> | no follow

Syntax Description

no

Negate a command or set its defaults

follow

Group to be followed

name

master name string to follow

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

forceshut reset-reason

forceshut [ { module <module> | <s0> <santa-cruz-range> | zone <zonenum> <subzone> } ] reset-reason <reset_reason_string>

Syntax Description

forceshut

Force the entire switch to shut down

module

(Optional) Optional. Module to be forceshut(optional arg)

module

(Optional) please enter the module number

s0

(Optional) Power off a specific xbar

santa-cruz-range

(Optional) please enter the xbar number

zone

(Optional) Optional. Zone to be forceshut(optional arg)

zonenum

(Optional) please enter the zone number

subzone

(Optional) please enter the subzone number

reset-reason

Shut down (with reset-reason)

reset_reason_string

please enter reset_reason_string in quotes

Command Mode

- /exec

format bootflash

format bootflash:

Syntax Description

format

Format disks

bootflash:

Format bootflash:

Command Mode

- /exec

format bootflash check-filesystem

format bootflash: check-filesystem

Syntax Description

format

Format disks

bootflash:

Format bootflash:

check-filesystem

Format bootflash: and fix any errors in file system

Command Mode

- /exec

format usb1

format usb1:

Syntax Description

format

Format disks

usb1:

Format usb1:

Command Mode

- /exec

format usb2

format usb2:

Syntax Description

format

Format disks

usb2:

Format usb2:

Command Mode

- /exec

forward

[no] forward

Syntax Description

no

(Optional) Negate a command or set its defaults

forward

Configure paths

Command Mode

- /exec/configure/mpls_static/ipv4/lsp/inlabel

forwarder preempt

[no] forwarder preempt [ delay minimum <min-delay> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

forwarder

Forwarder Configuration

preempt

Overthrow lower priority designated routers

delay

(Optional) Wait before preempting

minimum

(Optional) Delay at least this long

min-delay

(Optional) Number of seconds for minimum delay

Command Mode

- /exec/configure/if-eth-any/glbp

forwarding-adjacency

[no] forwarding-adjacency | forwarding-adjacency [ holdtime <msec> ]

Syntax Description

no

Negate a command or set its defaults

forwarding-adjacency

Treat this tunnel as a Forwarding Adjacency

holdtime

(Optional) How long in msecs to wait upon flooding a down Forwarding Adjacency

msec

(Optional) Holdtime on MPLS TE Down

Command Mode

- /exec/configure/if-te

fragments

[no] fragments <opt_type>

Syntax Description

no

(Optional) Negate a command or set its defaults

opt_type

frag_op_type

Command Mode

- /exec/configure/ipacl /exec/configure/ipv6acl

frequency

{ { no | default } frequency | frequency <seconds> }

Syntax Description

no

default

Set a command to its defaults

frequency

Frequency of an operation

seconds

Frequency in seconds

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

from to

[no] { { from <frm-list> to <to-val> } | { default { <value> | copy | ignore } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

ignore

Ignore any unspecified values

Command Mode

- /exec/configure/table-map

from to

{ [ no ] { { from <frm-list> to <to-val> } | { default <value> } } } | default copy

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

Command Mode

- /exec/configure/def-tmap

Chapter 8. G Commands

- generate type7_encrypted_secret

- getnext

- glbp

- global-block

- graceful-restart-helper

- graceful-restart

- graceful-restart

- graceful-restart

- graceful-restart

- graceful-restart

- graceful-restart

- graceful-restart

- graceful-restart

- graceful-restart grace-period

- graceful-restart grace-period

- graceful-restart helper-disable

- graceful-restart helper-disable

- graceful-restart restart-time

- graceful-restart stalepath-time

- graceful-restart t3 manual

- graceful-restart t3 manual

- graceful-restart t3 manual

- graceful consistency-check

- grep

- grep

- grep

- guestshell

- gunzip

- gzip

generate type7_encrypted_secret

generate type7_encrypted_secret

Syntax Description

generate

generate

type7_encrypted_secret

Type 7 Encrypted Secret

Command Mode

- /exec

getnext

| getnext

Syntax Description

|

Pipe command output to filter

getnext

return next instance instead of specified one, or first instance if none specified (if supported by feature)

Command Mode

- /output

glbp

[no] glbp <group-num>

Syntax Description

no

(Optional) Negate a command or set its defaults

glbp

Configure GLBP

group-num

Group Number

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel

global-block

[no] global-block <min-srgb-label> <max-srgb-label>

Syntax Description

no

(Optional) Negate a command or set its defaults

global-block

Specify global block range for Segment Routing bindings

min-srgb-label

Minimum label value

max-srgb-label

Maximum label value

Command Mode

- /exec/configure/ulib

graceful-restart-helper

[no] graceful-restart-helper

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart-helper

Configure Graceful Restart Helper mode functionality

Command Mode

- /exec/configure/router-bgp/vrf-cmds

graceful-restart

[no] graceful-restart

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

graceful-restart

[no] graceful-restart [ planned-only ]

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

planned-only

(Optional) Enable graceful restart only for a planned restart

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

graceful-restart

graceful-restart [ timers { forwarding-holding <fwdg-holdtime> | max-recovery <recovery-time> | neighbor-liveness <peer-liveness-time> } ] | no graceful-restart [ timers { forwarding-holding | max-recovery | neighbor-liveness } ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Configure LDP Graceful Restart

timers

(Optional) Configure Graceful Restart timers

forwarding-holding

(Optional) Forwarding State Holding time

fwdg-holdtime

(Optional) seconds

max-recovery

(Optional) Max-Recovery time

recovery-time

(Optional) seconds

neighbor-liveness

(Optional) Neighbor-Liveness time

peer-liveness-time

(Optional) seconds

Command Mode

- /exec/configure/ldp

graceful-restart

[no] graceful-restart [ planned-only ]

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

planned-only

(Optional) Enable graceful restart only for a planned restart

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

graceful-restart

{ { [ no ] [ eigrp ] graceful-restart } | { [ no ] nsf } }

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

graceful-restart

Peer resync without adjancency reset

nsf

Non-stop forwarding

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

graceful-restart

[no] graceful-restart

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

graceful-restart

[no] graceful-restart

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure Graceful Restart functionality

Command Mode

- /exec/configure/router-bgp/vrf-cmds

graceful-restart

[no] graceful-restart

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

graceful-restart grace-period

[no] graceful-restart grace-period <grace-period>

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

grace-period

Configure maximum interval to restart gracefully

grace-period

Grace period in seconds

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

graceful-restart grace-period

[no] graceful-restart grace-period <grace-period>

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

grace-period

Configure maximum interval to restart gracefully

grace-period

Grace period in seconds

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

graceful-restart helper-disable

[no] graceful-restart helper-disable

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

helper-disable

Disable helper mode

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

graceful-restart helper-disable

[no] graceful-restart helper-disable

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

helper-disable

Disable helper mode

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

graceful-restart restart-time

graceful-restart restart-time <restart-time> | no graceful-restart restart-time [ <restart-time> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Configure Graceful Restart functionality

restart-time

Maximum time for restart advertised to peers

restart-time

Restart time (seconds)

Command Mode

- /exec/configure/router-bgp/vrf-cmds

graceful-restart stalepath-time

graceful-restart stalepath-time <stalepath-time> | no graceful-restart stalepath-time [ <stalepath-time> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Configure Graceful Restart functionality

stalepath-time

Maximum time to keep a restarting peer's stale routes

stalepath-time

Stalepath time (seconds)

Command Mode

- /exec/configure/router-bgp/vrf-cmds

graceful-restart t3 manual

graceful-restart t3 manual <sec> | no graceful-restart t3 manual [ <sec> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

t3

Set the T3 (RFC 3847) graceful restart timer

manual

Change manually T3 default value

sec

Specify T3 value (secs)

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

graceful-restart t3 manual

graceful-restart t3 manual <sec> | no graceful-restart t3 manual [ <sec> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

t3

Set the T3 (RFC 3847) graceful restart timer

manual

Change manually T3 default value

sec

Specify T3 value (secs)

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

graceful-restart t3 manual

graceful-restart t3 manual <sec> | no graceful-restart t3 manual [ <sec> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

t3

Set the T3 (RFC 3847) graceful restart timer

manual

Change manually T3 default value

sec

Specify T3 value (secs)

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

graceful consistency-check

[no] graceful consistency-check

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful

Enable graceful features

consistency-check

Enable graceful type-1 consistency check

Command Mode

- /exec/configure/vpc-domain

grep

| { grep | egrep } [ -c | -i | -n | -v | -w | -x | <ctx> | -A <num> | -B <num> ] + <expr>

Syntax Description

|

Pipe command output to filter

grep

Grep - print lines matching a pattern

egrep

Egrep - print lines matching a pattern

-c

(Optional) Print a total count of matching lines only

-i

(Optional) Ignore case difference when comparing strings

-n

(Optional) Print each match preceded by its line number

-v

(Optional) Print only lines that contain no matches for <expr>

-w

(Optional) Print only lines where the match is a complete word

-x

(Optional) Print only lines where the match is a whole line

ctx

(Optional) Print <num> lines of context on each side of every match

-A

(Optional) Print <num> lines of context after every matching line

-B

(Optional) Print <num> lines of context before every matching line

num

(Optional) Print <num> lines of context

expr

Search for the expression

Command Mode

- /output

grep

| { grep | egrep } [ count | ignore-case | line-number | invert-match | word-exp | line-exp | <ctx> | next <num> | prev <num> ] + <expr>

Syntax Description

|

Pipe command output to filter

grep

Grep - print lines matching a pattern

egrep

Egrep - print lines matching a pattern

count

(Optional) Print a total count of matching lines only

ignore-case

(Optional) Ignore case difference when comparing strings

line-number

(Optional) Print each match preceded by its line number

invert-match

(Optional) Print only lines that contain no matches for <expr>

word-exp

(Optional) Print only lines where the match is a complete word

line-exp

(Optional) Print only lines where the match is a whole line

ctx

(Optional) Print <num> lines of context on each side of every match

next

(Optional) Print <num> lines of context after every matching line

prev

(Optional) Print <num> lines of context before every matching line

num

(Optional) Print <num> lines of context

expr

Search for the expression

Command Mode

- /output

grep

| { grep | egrep } [ -c | -i | -n | -v | -w | -x | <ctx> | -A <num> | -B <num> ] + [ -- ] <expr>

Syntax Description

|

Pipe command output to filter

grep

Grep

egrep

Egrep

-c

(Optional) Print a total count of matching lines only

-i

(Optional) Ignore case difference when comparing strings

-n

(Optional) Print each match preceded by its line number

-v

(Optional) Print only lines that contain no matches for <expr>

-w

(Optional) Print only lines where the match is a complete word

-x

(Optional) Print only lines where the match is a whole line

ctx

(Optional) Print <num> lines of context on each side of every match

-A

(Optional) Print <num> lines of context after every matching line

-B

(Optional) Print <num> lines of context before every matching line

num

(Optional) Print <num> lines of context

--

(Optional) --

expr

Search for the expression

Command Mode

- /output

guestshell

guestshell [ { enable [ { package <enable_uri> } ] } | { upgrade [ { package <upgrade_uri> } ] } | { disable } | { destroy } | { reboot } | <sync_cmd_name> | { resize { rootfs <gsh_rootfs> | cpu <gsh_cpu> | memory <gsh_memory> } } | { run { <cmd_args> } } ]

Syntax Description

guestshell

Request a guest shell

enable

(Optional) Enable the guest shell service

upgrade

(Optional) Upgrade the guest shell service package to a different version

disable

(Optional) Disable the guest shell service package

destroy

(Optional) Disable and uninstall the guest shell service package

sync_cmd_name

(Optional) Synchronize the contents of the guest shell to standby supervisor

reboot

(Optional) Deactivate and reactivate the guest shell service

resize

(Optional) Resize the existing/default guest shell parameters

rootfs

(Optional) Resize the guest shell root filesystem to a larger value

gsh_rootfs

(Optional) New root filesystem size (in MB)

cpu

(Optional) Resize the system CPU share allocated to guest shell

gsh_cpu

(Optional) New CPU share allocation (as % of system CPU)

memory

(Optional) Resize the system memory allocated to guest shell

gsh_memory

(Optional) New memory size (in MB)

package

(Optional) Package location

enable_uri

(Optional) File name (with .ova extension) for the virtual service

upgrade_uri

(Optional) File name (with .ova extension) for the virtual service

run

(Optional) Execute/run program in the guest shell

cmd_args

(Optional) Executable with optional arguments

Command Mode

- /exec

gunzip

gunzip <uri0>

Syntax Description

gunzip

Uncompresses LZ77 coded files

uri0

Enter filename (filename must have .gz extension)

Command Mode

- /exec

gzip

gzip <uri0>

Syntax Description

gzip

Compresses file using LZ77 coding

uri0

Enter filename

Command Mode

- /exec

Chapter 9. H Commands

- ha-policy single

- ha-stateful

- hardware access-list lou resource threshold

- hardware access-list match inner-header

- hardware access-list module

- hardware access-list tcam region

- hardware access-list tcam region double-wide

- hardware access-list tcam region double-wide

- hardware access-list tcam region qualify udf

- hardware ecmp hash-offset

- hardware ecmp hash-polynomial

- hardware ejector enable

- hardware fan-zone raise-speed

- hardware forwarding l3 resource route non-deterministic

- hardware forwarding unicast trace

- hardware ip glean throttle

- hardware ip glean throttle maximum

- hardware ip glean throttle syslog

- hardware ip glean throttle timeout

- hardware ipv6 glean throttle

- hardware ipv6 glean throttle maximum

- hardware ipv6 glean throttle syslog

- hardware ipv6 glean throttle timeout

- hardware module boot-order reverse

- hardware profile buffer info poll-interval timer

- hardware profile buffer info port-threshold threshold

- hardware profile ecmp auto-recovery threshold

- hardware profile ecmp resilient

- hardware profile ecmp template module

- hardware profile front portmode

- hardware profile ipv6 alpm carve-value

- hardware profile ipv6 lpm-entries maximum

- hardware profile module

- hardware profile multicast max-limit

- hardware profile multicast max-limit lpm-entries

- hardware profile multicast optimization disable

- hardware profile multicast prefer-source-tree

- hardware profile multicast syslog-threshold

- hardware profile openflow

- hardware profile pfc mmu buffer-reservation

- hardware profile portmode

- hardware profile tcam ipv6-sup-tcam match-inner

- hardware profile tcam region

- hardware profile tcam region span qualify udf

- hardware profile tcam region spanv6-l2 qualify udf

- hardware profile tcam region spanv6 qualify udf

- hardware profile tcam resource service-template

- hardware profile tcam resource template

- hardware profile tcam syslog-threshold

- hardware profile ucast6 lpm-65-to-127-max-limit

- hardware profile ucast6 max-limit

- hardware profile unicast enable-host-ecmp

- hardware profile unicast syslog-threshold

- hardware sample-redirect module redirect-interface

- head

- header-type 3

- hello-interval

- hello-interval

- hello-interval

- hex

- history

- history

- history

- history

- history

- history

- history buffer

- history syslog

- hold adjacency

- hold ip route

- hold ipv6 route

- hold timeout

- holdtime

- hop

- host-reachability protocol

- host-reachability protocol controller

- hostname

- hostname dynamic

- hostname dynamic

- hostname dynamic

- hsrp

- hsrp anycast

- hsrp bfd

- hsrp bfd all-interfaces

- hsrp delay minimum

- hsrp force state vlan

- hsrp ipv6

- hsrp mac-refresh

- hsrp timers extended-hold

- hsrp use-bia

- hsrp version 1

- http get

- human

- human

- hw-module logging onboard

- hw-module logging onboard

ha-policy single

ha-policy { single-sup <hap-change> | dual-sup <sw-change> } +

Syntax Description

ha-policy

Change HA policy for this VDC

hap-change

Change HA policy for this VDC

single-sup

Change HA policy for this VDC for single-sup situations

dual-sup

Change HA policy for this VDC for dual-sup situations

sw-change

Set hap policy

Command Mode

- /exec/configure/vdc

ha-stateful

[no] ha-stateful

Syntax Description

no

(Optional) Negate a command or set its defaults

ha-stateful

Enable stateful OSPF HA

Command Mode

- /exec/configure/router-ospf

hardware access-list lou resource threshold

[no] hardware access-list lou resource threshold <threshold>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

lou

LOU

resource

hardware resource

threshold

port expansion threshold

threshold

value of threshold

Command Mode

- /exec/configure

hardware access-list match inner-header

[no] hardware access-list match inner-header

Syntax Description

no

(Optional) Negate the command or set its defaults

hardware

Change hardware usage settings

access-list

Access Control List

match

Match criteria in ACL

inner-header

Match inner header fields in IPinIP/GRE packets

Command Mode

- /exec/configure

hardware access-list module

[no] hardware access-list { resource-pooling | resource pooling } module <module-number>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Show hardware information

access-list

Access Control List

resource-pooling

Enable ACL programming across TCAM banks

resource

hardware resource

pooling

Enable ACL programming across TCAM banks

module

module number

module-number

specify module number

Command Mode

- /exec/configure

hardware access-list tcam region

[no] hardware access-list tcam region <type> <tcam_size>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

type

Region type

tcam_size

Enter tcam size

Command Mode

- /exec/configure

hardware access-list tcam region double-wide

[no] hardware access-list tcam region <arp-ether> <arpether_tcam_size> double-wide

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

arp-ether

Region type

arpether_tcam_size

Enter tcam size

double-wide

Double Width

Command Mode

- /exec/configure

hardware access-list tcam region double-wide

[no] hardware access-list tcam region <double-wide-region> <tcam_size> double-wide

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

double-wide-region

Region type

tcam_size

Enter tcam size

double-wide

Double Width

Command Mode

- /exec/configure

hardware access-list tcam region qualify udf

[no] hardware access-list tcam region <udf_tcam_type> qualify { udf | v6udf } { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

udf_tcam_type

Region type

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

v6udf

Configure IPv6 UDF names

udf_name

UDF name

Command Mode

- /exec/configure

hardware ecmp hash-offset

[no] hardware ecmp hash-offset <value> [ concatenation ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

ecmp

ECMP configuration

hash-offset

Configure hash offset

value

Hash offset 0-15 non-concatenate mode, 0-63 concatenate mode

concatenation

(Optional) Configure hash concatenation

Command Mode

- /exec/configure

hardware ecmp hash-polynomial

hardware ecmp hash-polynomial <poly-type> | no hardware ecmp hash-polynomial

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

ecmp

ECMP configuration

hash-polynomial

Configure hash polynomial

poly-type

Polynomial type

Command Mode

- /exec/configure

hardware ejector enable

[no] hardware ejector enable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

ejector

Card ejector functionality

enable

enabled means when both ejectors are open, card is powered down

Command Mode

- /exec/configure

hardware fan-zone raise-speed

[no] hardware fan-zone <fan_zone_id> raise-speed <speed-to-raise>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

fan-zone

Fan Zone supported in the switch

fan_zone_id

please enter fan zone id whose speed needs to be increased

raise-speed

Speed to be added for current fan zone speed

speed-to-raise

please enter additional fan speed

Command Mode

- /exec/configure

hardware forwarding l3 resource route non-deterministic

[no] hardware forwarding l3 resource route non-deterministic

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

hardware information

forwarding

forwarding information

l3

Layer-3

resource

hardware resources

route

TCAM capacity to hold prefixes

non-deterministic

extend upto 1M

Command Mode

- /exec/configure

hardware forwarding unicast trace

[no] hardware forwarding unicast trace

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

forwarding

Hardware forwarding

unicast

Hardware Unicast forwarding

trace

Debug traces

Command Mode

- /exec/configure

hardware ip glean throttle

[no] hardware ip glean throttle

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

Command Mode

- /exec/configure

hardware ip glean throttle maximum

{ hardware ip glean throttle maximum <count> } | { no hardware ip glean throttle maximum }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

maximum

Maximum number of entries

count

Count

Command Mode

- /exec/configure

hardware ip glean throttle syslog

{ hardware ip glean throttle syslog <pkt-count> } | { no hardware ip glean throttle syslog }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

syslog

Threshold for syslog for number of packets hitting the entry

pkt-count

Packet count

Command Mode

- /exec/configure

hardware ip glean throttle timeout

{ hardware ip glean throttle timeout <timeout-in-sec> } | { no hardware ip glean throttle timeout }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

timeout

Timeout

timeout-in-sec

Timeout value in seconds (should be multiple of 30, else will be rounded off to nearest boundary)

Command Mode

- /exec/configure

hardware ipv6 glean throttle

[no] hardware ipv6 glean throttle

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

Command Mode

- /exec/configure

hardware ipv6 glean throttle maximum

{ hardware ipv6 glean throttle maximum <count> } | { no hardware ipv6 glean throttle maximum }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

maximum

Maximum number of entries

count

Count

Command Mode

- /exec/configure

hardware ipv6 glean throttle syslog

{ hardware ipv6 glean throttle syslog <pkt-count> } | { no hardware ipv6 glean throttle syslog }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

syslog

Threshold for syslog for number of packets hitting the entry

pkt-count

Packet count

Command Mode

- /exec/configure

hardware ipv6 glean throttle timeout

{ hardware ipv6 glean throttle timeout <timeout-in-sec> } | { no hardware ipv6 glean throttle timeout }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

timeout

Timeout

timeout-in-sec

Timeout value in seconds (should be multiple of 30, else will be rounded off to nearest boundary)

Command Mode

- /exec/configure

hardware module boot-order reverse

[no] hardware module boot-order reverse

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

module

applies on all the modules

boot-order

Configure order of module power-up

reverse

reverse order of module power-up

Command Mode

- /exec/configure

hardware profile buffer info poll-interval timer

[no] hardware profile buffer info poll-interval [ module <module> ] timer <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

buffer

System buffer

info

Information

poll-interval

System buffer status polling interval

module

(Optional) Slot/module

module

(Optional) Slot/module number

timer

Polling timer

msec

Polling timer value in msecs

Command Mode

- /exec/configure

hardware profile buffer info port-threshold threshold

[no] hardware profile buffer info port-threshold [ module <module> ] threshold <value>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

buffer

System buffer

info

Information

port-threshold

Set port egress buffer usage threshold

module

(Optional) Slot/module

module

(Optional) Slot/module number

threshold

threshold value

value

percentage of maximum usage

Command Mode

- /exec/configure

hardware profile ecmp auto-recovery threshold

hardware profile ecmp auto-recovery threshold <percentage> | no hardware profile ecmp auto-recovery threshold

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

ecmp

ECMP settings

auto-recovery

ECMP auto-recovery settings

threshold

ECMP table free percentage threshold for auto-recovery

percentage

Percentage

Command Mode

- /exec/configure

hardware profile ecmp resilient

[no] hardware profile ecmp resilient

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

ecmp

ECMP settings

resilient

Configure ECMP resilient mode

Command Mode

- /exec/configure

hardware profile ecmp template module

[no] hardware profile ecmp template [ l3vpn ] module <module>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

ecmp

set the ecmp template profile

template

set the ecmp template profile

l3vpn

(Optional) set the l3vpn ecmp template profile

module

Enter module number

module

Command Mode

- /exec/configure

hardware profile front portmode

hardware profile front portmode <port-mode> | no hardware profile front portmode

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

front

port 1 QSFP/SFP+ settings

portmode

QSFP or SFP+

port-mode

Configure QSFP/sfp+ port mode

Command Mode

- /exec/configure

hardware profile ipv6 alpm carve-value

[no] hardware profile ipv6 alpm carve-value <ipv6_alpm_carve_value>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

ipv6

ipv6

alpm

alpm mode

carve-value

carve value

ipv6_alpm_carve_value

maximum entries

Command Mode

- /exec/configure

hardware profile ipv6 lpm-entries maximum

[no] hardware profile ipv6 lpm-entries maximum <ipv6_lpm_max_entry>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

ipv6

ipv6

lpm-entries

lpm(non-host) entries

maximum

maximum limit

ipv6_lpm_max_entry

maximum entries

Command Mode

- /exec/configure

hardware profile module

[no] hardware profile [ vxlan | mpls ] module { all | <module> }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

vxlan

(Optional) Set the hardware profile for module to vxlan

mpls

(Optional) Set the hardware profile for module to MPLS

module

Enter module number

all

All modules

module

Command Mode

- /exec/configure

hardware profile multicast max-limit

{ hardware profile multicast max-limit <mcast-ent> } | { no hardware profile multicast max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

max-limit

maximum limit for multicast entries

mcast-ent

Mcast Table Entries

Command Mode

- /exec/configure

hardware profile multicast max-limit lpm-entries

[no] hardware profile multicast max-limit lpm-entries <ipv4_mcast_lpm_max_entry>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

max-limit

maximum limit for multicast entries

lpm-entries

lpm(non-host) entries

ipv4_mcast_lpm_max_entry

maximum entries

Command Mode

- /exec/configure

hardware profile multicast optimization disable

[no] hardware profile multicast optimization disable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

multicast

set multicast profile

optimization

set multicast optimization profile

disable

set the multicast optimization disable profile

Command Mode

- /exec/configure

hardware profile multicast prefer-source-tree

[no] hardware profile multicast prefer-source-tree [ eternity [ limit <max-limit> ] ]

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

prefer-source-tree

prefer the source tree

eternity

(Optional) prefer source tree for eternity and not for just 2 minutes

limit

(Optional) Configure a limit for the number of hardware entries used

max-limit

(Optional) Number of (S,G) for which source tree is preferred

Command Mode

- /exec/configure

hardware profile multicast syslog-threshold

[no] hardware profile multicast syslog-threshold <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

syslog-threshold

MROUTE table syslog threshold

percentage

Percentage (Default is 90)

Command Mode

- /exec/configure

hardware profile openflow

[no] hardware profile { openflow [ agent default { drop | normal } ] | { tap-aggregation [ l2drop ] } }

Syntax Description

no

(Optional) Negate the command

hardware

Hardware Internal Information

profile

Profile

openflow

Openflow

tap-aggregation

Tap Aggregation

l2drop

(Optional) Drop non IP traffic ingress on mode tap interfaces

agent

(Optional) Act as Openflow Agent

default

(Optional) Specify default action for frames which don't match any flow

drop

(Optional) Drop all frames that miss MAC

normal

(Optional) [default]Flood unknown traffic

Command Mode

- /exec/configure

hardware profile pfc mmu buffer-reservation

[no] hardware profile pfc mmu buffer-reservation <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

Hardware Internal Information

profile

profile settings

pfc

System level priority-flow-control settings

mmu

Hardware memory management unit configuration

buffer-reservation

Shared pool buffer reservation

percentage

Percentage of shared pool buffers to be reserved

Command Mode

- /exec/configure

hardware profile portmode

{ hardware profile portmode <port-mode> [ 2-tuple ] } | no hardware profile portmode

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

portmode

QSFP port mode setting

port-mode

Configure QSFP port mode

2-tuple

(Optional) Display QSFP portnames in 2-tuple mode even in 10G mode

Command Mode

- /exec/configure

hardware profile tcam ipv6-sup-tcam match-inner

{ hardware profile tcam ipv6-sup-tcam match-inner } | { no hardware profile tcam ipv6-sup-tcam match-inner }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

ipv6-sup-tcam

IPv6 SUP TCAM parameters

match-inner

match inner payload for tunnel packets

Command Mode

- /exec/configure

hardware profile tcam region

[no] hardware profile tcam region { <tcam_compat_type> <tcam_compat_size> | ifacl <tcam_compat_size> [ double-wide ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

profile

profile

tcam

Configure tcam parameters

region

Configure tcam region

ifacl

IPV4 PACL size

double-wide

(Optional) Configure tcam as double wide

tcam_compat_type

tcam_compat_size

Enter tcam size

Command Mode

- /exec/configure

hardware profile tcam region span qualify udf

[no] hardware profile tcam region span qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

span

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

- /exec/configure

hardware profile tcam region spanv6-l2 qualify udf

[no] hardware profile tcam region spanv6-l2 qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

spanv6-l2

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

- /exec/configure

hardware profile tcam region spanv6 qualify udf

[no] hardware profile tcam region spanv6 qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

spanv6

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

- /exec/configure

hardware profile tcam resource service-template

[no] hardware profile tcam resource service-template { <name> } [ module { <lc> | <fm> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

resource

Configure tcam hardware resources

service-template

Commit template

name

Select name of template

module

(Optional) Specify a module number

lc

(Optional) line card number

fm

(Optional) fabric module number

Command Mode

- /exec/configure handle auto 424

hardware profile tcam resource template

[no] hardware profile tcam resource template { <name> { ref-template <temp-nontahoe> | ref-template-tahoe <temp-tahoe> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

resource

Configure tcam hardware resources

template

Configure template based tcam carving parameters

ref-template

Select a default template as reference

temp-nontahoe

ref-template-tahoe

Select a default template as reference

temp-tahoe

name

Create/Select name of custom template

Command Mode

- /exec/configure

hardware profile tcam syslog-threshold

{ hardware profile tcam syslog-threshold <percentage> } | { no hardware profile tcam syslog-threshold }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

syslog-threshold

TCAMs syslog threshold

percentage

Percentage

Command Mode

- /exec/configure

hardware profile ucast6 lpm-65-to-127-max-limit

{ hardware profile ucast6 lpm-65-to-127-max-limit <unicast-ent> } | { no hardware profile ucast6 lpm-65-to-127-max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

ucast6

unicast ipv6 settings

lpm-65-to-127-max-limit

maximum limit for unicast ipv6 lpm-65-to-127 entries, default is 256

unicast-ent

Unicast ipv6 lpm-65-to-127 Table Entries

Command Mode

- /exec/configure

hardware profile ucast6 max-limit

{ hardware profile ucast6 max-limit <unicast-ent> } | { no hardware profile ucast6 max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

ucast6

unicast ipv6 settings

max-limit

maximum limit for unicast ipv6 entries

unicast-ent

Unicast ipv6 Table Entries

Command Mode

- /exec/configure

hardware profile unicast enable-host-ecmp

[no] hardware profile unicast enable-host-ecmp [ arp-nd | [ ipv4 [ arp ] ] | [ ipv6 [ nd ] ] ]

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

unicast

Unicast settings

enable-host-ecmp

Enable ECMP support for /32 (IPv4) and /128 (IPv6) routes

ipv4

(Optional) Enable ECMP support for /32 (IPv4 Only) Routes

ipv6

(Optional) Enable ECMP support for /128 (IPv6 Only) Routes

arp-nd

(Optional) Retain ARP (IPv4) and ND (IPv6) Routes in Host-Table

arp

(Optional) Retain ARP Entries in Host-Table

nd

(Optional) Retain ND Entries in Host-Table

Command Mode

- /exec/configure

hardware profile unicast syslog-threshold

{ hardware profile unicast syslog-threshold <percentage> } | { no hardware profile unicast syslog-threshold }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

unicast

Unicast settings

syslog-threshold

Unicast Route table syslog threshold

percentage

Percentage

Command Mode

- /exec/configure

hardware sample-redirect module redirect-interface

hardware sample-redirect module <num> redirect-interface <interface>

Syntax Description

hardware

Change hardware usage settings

sample-redirect

Redirect netflow sampled data

module

Line card module

num

slot number

redirect-interface

Interface for redirecting the traffic

interface

Interface Name

Command Mode

- /exec

head

| head [ -n <lines> ]

Syntax Description

|

Pipe command output to filter

head

Display first lines

-n

(Optional) modify number of lines (default 10)

lines

(Optional) number of lines to print

Command Mode

- /output

header-type 3

[no] header-type 3

Syntax Description

no

(Optional) Negate a command or set its defaults

header-type

Set ERSPAN Source version

3

ERSPAN Source Version 3

Command Mode

- /exec/configure/config-monitor-erspan-src

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

hex

hex <expr>

Syntax Description

hex

calculator with results in decimal format

expr

the expression to compute (integer arithmetics)

Command Mode

- /exec

history

{ no | default } history { { buckets-kept } | { distributions-of-statistics-kept } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { filter } | { hours-of-statistics-kept } | { lives-kept } | { statistics-distribution-interval } }

Syntax Description

no

interval

(Optional) buckets

default

Set a command to its defaults

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

enhanced

Enable enhanced history collection

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

filter

Add operation to History when...

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho

history

history { { buckets-kept <num-buckets-kept> } | { distributions-of-statistics-kept <num-dist-stats> } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { filter { all | failures | none | overThreshold } } | { hours-of-statistics-kept <num-hours-of-stats> } | { lives-kept <life-size-value> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

interval

(Optional) buckets

interval-seconds

(Optional) <num-buckets>

life-size-value

<dist-interval>

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

num-buckets-kept

Bucket size value (default 15)

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

num-dist-stats

Distribution bucket size value (default 1)

enhanced

Enable enhanced history collection

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

filter

Add operation to History when...

all

Collect every operation in History

failures

Collect operations that fail in History

none

Shutoff History collection

overThreshold

Collect operations that are over threshold in History

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

num-hours-of-stats

Hour groups size value (default 2)

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

dist-interval

Distribution interval value in msec (default 20)

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho

history

{ no | default } history { { buckets-kept } | { distributions-of-statistics-kept } | { filter } | { hours-of-statistics-kept } | { lives-kept } | { statistics-distribution-interval } }

Syntax Description

no

default

Set a command to its defaults

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

filter

Add operation to History when...

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

Command Mode

- /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

history

history { { buckets-kept <num-buckets-kept> } | { distributions-of-statistics-kept <num-dist-stats> } | { filter { all | failures | none | overThreshold } } | { hours-of-statistics-kept <num-hours-of-stats> } | { lives-kept <life-size-value> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

dist-interval

<num-buckets-kept>

num-hours-of-stats

<life-size-value>

distributions-of-statistics-kept

hours-of-statistics-kept

statistics-distribution-interval

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

num-buckets-kept

Bucket size value (default 15)

num-dist-stats

Distribution bucket size value (default 1)

filter

Add operation to History when...

all

Collect every operation in History

failures

Collect operations that fail in History

none

Shutoff History collection

overThreshold

Collect operations that are over threshold in History

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

life-size-value

Life size value (default 0)

Command Mode

- /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

history

{ no | default } history { { distributions-of-statistics-kept } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { hours-of-statistics-kept } | { statistics-distribution-interval } }

Syntax Description

no

interval

(Optional) buckets

distributions-of-statistics-kept

hours-of-statistics-kept

statistics-distribution-interval

default

Set a command to its defaults

history

History and Distribution Data

enhanced

Enable enhanced history collection

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

Command Mode

- /exec/configure/ip-sla/jitter

history

history { { distributions-of-statistics-kept <num-dist-stats> } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { hours-of-statistics-kept <num-hours-of-stats> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

interval

(Optional) buckets

num-buckets

(Optional) <num-hours-of-stats>

enhanced

hours-of-statistics-kept

history

History and Distribution Data

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

num-dist-stats

Distribution bucket size value (default 1)

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

num-hours-of-stats

Hour groups size value (default 2)

statistics-distribution-interval

Statistics distribution interval size

dist-interval

Distribution interval value in msec (default 20)

Command Mode

- /exec/configure/ip-sla/jitter

history buffer

[no] history buffer [ { size [ <onep-historysize> [ purge <historypurge> ] ] } | { purge <historypurge> [ size <onep-historysize> ] } | { session [ <appname-str> ] } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

history

One Platform history trails

buffer

In memory buffering of API history trails

session

(Optional) Session history filter

appname-str

(Optional) Full or partial session name

size

(Optional) History buffer size in bytes

onep-historysize

(Optional) Bytes (default: 32768)

purge

(Optional) Purge the oldest or newest session history

historypurge

(Optional) Purge session history

Command Mode

- /exec/configure/onep

history syslog

[no] history syslog

Syntax Description

no

(Optional) Negate a command or set its defaults

history

One Platform history trails

syslog

Enable the API history trails to syslog

Command Mode

- /exec/configure/onep

hold adjacency

hold adjacency <all>

Syntax Description

hold

Hold

adjacency

Display adjacency table

all

Hold all adjcencies

Command Mode

- /exec

hold ip route

hold ip { route | rnh } [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

hold

Hold

ip

IPv4

route

Hold routing information

rnh

Hold only RNH information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Hold all routes

Command Mode

- /exec

hold ipv6 route

hold ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

hold

Hold

ipv6

IPv6

route

Hold routing information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Hold all routes

Command Mode

- /exec

hold timeout

hold timeout <timeout_val>

Syntax Description

hold

Hold timer

timeout

timer timeout

timeout_val

timeout duration in seconds

Command Mode

- /exec/configure/vpc-domain

holdtime

holdtime { infinite | <secs> } | no holdtime

Syntax Description

no

Negate a command or set its defaults

holdtime

LDP session holdtime

infinite

Ignore LDP session holdtime

secs

Holdtime in seconds

Command Mode

- /exec/configure/ldp

hop

{ hop <val> } | { no hop }

Syntax Description

no

Negate a command or set its defaults

hop

Configure ngoam hop count

val

Configure ngoam service hop count value

Command Mode

- /exec/configure/configngoamprofile

host-reachability protocol

[no] host-reachability protocol [ bgp | openflow | openflow-ir ]

Syntax Description

no

(Optional) Negate a command or set its defaults

host-reachability

Configure host reachability advertisement

protocol

Control protocol to use

bgp

(Optional) Border Gateway Protocol

openflow

(Optional) OpenFlow

openflow-ir

(Optional) OpenFlow-IR

Command Mode

- /exec/configure/if-nve

host-reachability protocol controller

[no] host-reachability protocol controller <controller-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

host-reachability

Configure host reachability advertisement

protocol

Control protocol to use

controller

Controller

controller-id

Controller id value

Command Mode

- /exec/configure/if-nve

hostname

{ hostname | switchname } <name> | no { hostname | switchname }

Syntax Description

no

Negate a command or set its defaults

hostname

Configure system's host name

switchname

Configure system's host name

name

Enter switchname

Command Mode

- /exec/configure

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

hsrp

[no] hsrp <group-id> [ ipv4 ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

group-id

Group number (0-255 for HSRPv1)

ipv4

(Optional) Configure IP Version 4 group

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp anycast

[no] hsrp anycast <id> { ipv4 | ipv6 | both }

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP configuration commands

anycast

Anycast related commands

id

Bundle number

ipv4

Associate IP Version 4 for the bundle

ipv6

Associate IP Version 6 for the bundle

both

Associate IP Version 4 and 6 for the bundle

Command Mode

- /exec/configure

hsrp bfd

[no] hsrp bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

bfd

BFD protocol

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp bfd all-interfaces

[no] hsrp bfd all-interfaces

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

bfd

BFD protocol

all-interfaces

On all interfaces

Command Mode

- /exec/configure

hsrp delay minimum

hsrp delay { minimum <min-delay> | reload <reload-delay> } + | no hsrp delay [ minimum | reload ]

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

delay

HSRP initialisation delay

minimum

Minimum delay

reload

Delay after reload

min-delay

<0-10000> Delay in seconds

reload-delay

<0-10000> Delay in seconds

minimum

(Optional) reload

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp force state vlan

hsrp force state vlan { <vlans> | all }

Syntax Description

hsrp

Hot Standby Router Protocol (HSRP) information

force

Move the HSRP state

state

HSRP state

vlan

HSRP state changes for these vlans

all

Include all HSRP configured VLANs

vlans

VLAN IDs of the VLAN for which state change will affect

Command Mode

- /exec

hsrp ipv6

[no] hsrp <group-id> ipv6

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

group-id

Group number

ipv6

Configure IP Version 6 group

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp mac-refresh

hsrp mac-refresh [ <time> ] | no hsrp mac-refresh

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

mac-refresh

Interface mac-refresh time

time

(Optional) Timeout value (0-10000) in sec

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp timers extended-hold

[no] hsrp timers extended-hold [ <extended-hold> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

timers

Global Timers

extended-hold

Extended Hold

extended-hold

(Optional) Time in seconds

Command Mode

- /exec/configure

hsrp use-bia

[no] hsrp use-bia [ scope interface ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

use-bia

HSRP uses interface's burned in address

scope

(Optional) Specify the scope of use-bia

interface

(Optional) Use-bia applies to all groups on this interface or sub-interface

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp version 1

hsrp version { 1 | 2 } | no hsrp version

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

version

HSRP version

1

Version 1

2

Version 2

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

http get

[no] http { get } <WORD> { [ cache { disable | enable } ] [ proxy <proxy-info> ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] [ version <http-version> ] } +

Syntax Description

no

(Optional)

cache

(Optional) enable

proxy

(Optional) <proxy-info>

source-ip

(Optional) <source-ip-hostname>

source-port

(Optional) <src-port>

version

(Optional) <http-version>

http

HTTP Operation

get

HTTP get operation

WORD

URL

enable

(Optional) enable download of cached entries (default)

disable

(Optional) disable download of cached entries (default)

proxy-info

(Optional) proxy information string

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

src-port

(Optional) Port Number (Recommended port range between 1025-65534)

http-version

(Optional) Supported HTTP versions are '1.0' and '1.1'.

Command Mode

- /exec/configure/ip-sla

human

| human

Syntax Description

|

Pipe command output to filter

human

output in human format

Command Mode

- /output

human

| human

Syntax Description

|

Pipe command output to filter

human

output in human format

Command Mode

- /output

hw-module logging onboard

[no] hw-module logging onboard [ { environmental-history | error-stats | interrupt-stats | module <module> [ { environmental-history | error-stats | interrupt-stats | obfl-logs | cpuhog } ] | obfl-logs | cpuhog } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hw-module

Enable/Disable OBFL information

logging

Enable/Disable OBFL information

onboard

Enable/Disable OBFL information

environmental-history

(Optional) Enable/Disable OBFL environmental history

error-stats

(Optional) Enable/Disable OBFL error statistics

interrupt-stats

(Optional) Enable/Disable OBFL interrupt statistics

cpuhog

(Optional) Enable/Disable OBFL cpu hog events

module

(Optional) Enable/Disable OBFL information for Module

module

(Optional) Enter module number

obfl-logs

(Optional) Enable/Disable OBFL (boot-uptime/device-version/obfl-history)

Command Mode

- /exec/configure

hw-module logging onboard

[no] hw-module logging onboard [ { counter-stats | module <module> [ { counter-stats } ] } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hw-module

Enable/Disable OBFL information

logging

Enable/Disable OBFL information

onboard

Enable/Disable OBFL information

counter-stats

(Optional) Enable/Disable OBFL counter statistics

module

(Optional) Enable/Disable OBFL information for Module

module

(Optional) Enter module number

Command Mode

- /exec/configure

Chapter 10. I Commands

- icmp-echo

- icmpv6 cache disable

- icmpv6 cfs-queue

- icmpv6 library mts-queue

- icmpv6 mts-queue

- import

- import interface

- import l2vpn evpn

- import map

- import running-config

- import vpn unicast

- import vrf default map

- in-label allocate

- in-order-guarantee

- include profile

- include profile any

- index next

- ingress-replication

- ingress-replication protocol bgp

- ingress-replication protocol static

- ingress

- ingress interface

- ingress interface

- inherit peer-policy

- inherit peer-policy

- inherit peer-session

- inherit peer

- inherit port-profile

- initial-delay

- initial-refresh skip

- inject-map exist-map

- install activate

- install add

- install all

- install commit

- install deactivate

- install epld

- install epld

- install epld

- install epld

- install epld psu

- install feature-set fcoe-npv

- install feature-set mpls

- install license

- install module

- install remove

- install reset

- instance-id

- instance

- instance

- instance vlan

- interface-vlan reset credits

- interface-vlan reset fsm

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface

- interface breakout module

- interface breakout module

- interface breakout module port map

- interface breakout module port map

- interface down delay

- interop-enable

- ip

- ip

- ip

- ip

- ip

- ip access-class

- ip access-group

- ip access-list

- ip access-list match-local-traffic

- ip address

- ip address dhcp

- ip address secondary

- ip adjacency cache disable

- ip adjacency forcedownload

- ip adjacency l2fm-reg

- ip adjacency notify interval

- ip adjacency peer-gmac

- ip adjacency remote-adj

- ip adjacency route distance

- ip adjacency statistics collect

- ip adjacency statistics interval

- ip allow address-overlap

- ip allow port

- ip amt anycast-gateway-address

- ip amt anycast-relay-prefix

- ip amt gateway

- ip amt gateway send-discovery

- ip amt join-policy

- ip amt qqic

- ip amt relay-advertisement-address

- ip amt relay

- ip amt state-limit

- ip amt tunnel-limit

- ip arp

- ip arp

- ip arp allow-static-arp-outside-subnet

- ip arp broadcast mac-mismatch

- ip arp cache disable

- ip arp cache limit

- ip arp cfs-queue

- ip arp cos

- ip arp delete-adj-on-mac-delete

- ip arp event-history size

- ip arp event-history size

- ip arp garp-storm

- ip arp garp-storm timer count

- ip arp gratuitous hsrp duplicate

- ip arp gratuitous request

- ip arp gratuitous update

- ip arp inspection filter vlan

- ip arp inspection log-buffer entries

- ip arp inspection trust

- ip arp inspection validate

- ip arp inspection vlan

- ip arp mts-queue

- ip arp off-list timeout

- ip arp rarp fabric-forwarding

- ip arp rarp fabric-forwarding rate-limit

- ip arp request

- ip arp suppression-cache

- ip arp suppression testnum

- ip arp suppression timeout

- ip arp synchronize

- ip arp synchronize pull

- ip arp synchronize push

- ip arp test

- ip arp timeout

- ip arp timeout

- ip as-path access-list deny

- ip as-path access-list deny

- ip as-path access-list seq deny

- ip authentication

- ip auto-discard

- ip bandwidth-percent eigrp

- ip bandwidth eigrp

- ip cache disable

- ip community-list expanded deny

- ip community-list expanded deny

- ip community-list expanded seq deny

- ip community-list standard permit internet local-AS

- ip community-list standard permit internet local-AS

- ip community-list standard seq permit internet local-AS

- ip default-gateway

- ip delay eigrp

- ip destination

- ip dhcp packet strict-validation

- ip dhcp relay

- ip dhcp relay address

- ip dhcp relay information option

- ip dhcp relay information option trust

- ip dhcp relay information option vpn

- ip dhcp relay information trust-all

- ip dhcp relay information trusted

- ip dhcp relay source-address hsrp

- ip dhcp relay source-interface

- ip dhcp relay source-interface

- ip dhcp relay sub-option circuit-id customized

- ip dhcp relay sub-option circuit-id format-type string

- ip dhcp relay sub-option type cisco

- ip dhcp relay subnet-broadcast

- ip dhcp smart-relay

- ip dhcp smart-relay global

- ip dhcp snooping

- ip dhcp snooping information option

- ip dhcp snooping ipsg-excluded vlan

- ip dhcp snooping trust

- ip dhcp snooping verify mac-address

- ip dhcp snooping vlan

- ip directed-broadcast

- ip distribute-list eigrp

- ip dns source-interface

- ip domain-list

- ip domain-lookup

- ip domain-name

- ip drop-glean

- ip dscp-lop

- ip dscp

- ip eigrp bfd

- ip eigrp event-history bfd size

- ip eigrp event-history errors

- ip eigrp event-history size

- ip eigrp shutdown

- ip extcommunity-list expanded deny

- ip extcommunity-list standard permit

- ip flow monitor input

- ip flow monitor input

- ip flow monitor input

- ip flow monitor input

- ip flow monitor output

- ip flow monitor output

- ip forward

- ip ftp source-interface

- ip hello-interval eigrp

- ip hold-time eigrp

- ip host

- ip http source-interface

- ip icmp-errors source-interface

- ip igmp allow-v3-asm

- ip igmp any-query-destination

- ip igmp bootup-delay

- ip igmp enforce-router-alert

- ip igmp event-history cli

- ip igmp event-history ha

- ip igmp event-history interface

- ip igmp event-history interface

- ip igmp event-history mtrace

- ip igmp event-history mvr

- ip igmp event-history policy

- ip igmp event-history vrf

- ip igmp file-debug

- ip igmp flush-routes

- ip igmp group-timeout

- ip igmp ha-stateful

- ip igmp immediate-leave

- ip igmp join-group

- ip igmp last-member-query-count

- ip igmp last-member-query-response-time

- ip igmp querier

- ip igmp query-interval

- ip igmp query-max-response-time

- ip igmp report-link-local-groups

- ip igmp report prefix-list

- ip igmp robustness-variable

- ip igmp snooping

- ip igmp snooping

- ip igmp snooping

- ip igmp snooping

- ip igmp snooping access-group

- ip igmp snooping disable-nve-static-router-port

- ip igmp snooping disable-nve-static-router-port

- ip igmp snooping drop-invalid-reports

- ip igmp snooping event-history igmp-snoop-internal

- ip igmp snooping event-history mfdm-sum

- ip igmp snooping event-history mfdm

- ip igmp snooping event-history rib

- ip igmp snooping event-history vlan-events

- ip igmp snooping event-history vlan

- ip igmp snooping event-history vpc

- ip igmp snooping explicit-tracking

- ip igmp snooping explicit-tracking

- ip igmp snooping fast-leave

- ip igmp snooping fast-leave

- ip igmp snooping group-timeout

- ip igmp snooping group-timeout

- ip igmp snooping last-member-query-count

- ip igmp snooping last-member-query-count

- ip igmp snooping last-member-query-interval

- ip igmp snooping last-member-query-interval

- ip igmp snooping limit

- ip igmp snooping link-local-groups-suppression

- ip igmp snooping link-local-groups-suppression

- ip igmp snooping link-local-groups-suppression

- ip igmp snooping many-to-one-enhance

- ip igmp snooping max-gq-miss

- ip igmp snooping minimum-verison

- ip igmp snooping mrouter interface

- ip igmp snooping mrouter interface

- ip igmp snooping mrouter vpc-peer-link

- ip igmp snooping optimise-multicast-flood

- ip igmp snooping optimise-multicast-flood

- ip igmp snooping optimised-multicast-flood

- ip igmp snooping optimised

- ip igmp snooping proxy-leave use-group-address

- ip igmp snooping proxy general-queries

- ip igmp snooping proxy general-queries

- ip igmp snooping querier-timeout

- ip igmp snooping querier-timeout

- ip igmp snooping querier

- ip igmp snooping querier

- ip igmp snooping query-interval

- ip igmp snooping query-interval

- ip igmp snooping query-max-response-time

- ip igmp snooping query-max-response-time

- ip igmp snooping report-flood all

- ip igmp snooping report-suppression

- ip igmp snooping report-suppression

- ip igmp snooping report-suppression

- ip igmp snooping report prefix interface

- ip igmp snooping robustness-variable

- ip igmp snooping robustness-variable

- ip igmp snooping self-mac-check

- ip igmp snooping startup-query-count

- ip igmp snooping startup-query-count

- ip igmp snooping startup-query-interval

- ip igmp snooping startup-query-interval

- ip igmp snooping static-group interface

- ip igmp snooping static-group interface

- ip igmp snooping syslog-threshold

- ip igmp snooping v3-report-suppression

- ip igmp snooping v3-report-suppression

- ip igmp snooping v3-report-suppression

- ip igmp snooping version

- ip igmp snooping version

- ip igmp snooping vpc

- ip igmp snooping vpc

- ip igmp snooping vpc peer-link-exclude

- ip igmp snooping vpc peer-routes-download

- ip igmp snooping vxlan-umc drop

- ip igmp snooping vxlan

- ip igmp spoof-check

- ip igmp ssm-translate

- ip igmp startup-query-count

- ip igmp startup-query-interval

- ip igmp state-limit

- ip igmp static

- ip igmp suppress v3-gsq

- ip igmp syslog-threshold

- ip igmp version

- ip lisp alt-vrf

- ip lisp database-mapping dynamic priority weight

- ip lisp disable-spoof-alert

- ip lisp etr

- ip lisp etr accept-map-request-mapping

- ip lisp etr glean-mapping

- ip lisp etr map-cache-ttl

- ip lisp etr map-register-ttl

- ip lisp etr map-server key

- ip lisp hardware-forwarding

- ip lisp itr-etr

- ip lisp itr

- ip lisp itr drop-on-cache-miss

- ip lisp itr forward-on-cache-miss

- ip lisp itr map-resolver

- ip lisp itr send-data-probe

- ip lisp locator-down

- ip lisp locator-vrf

- ip lisp locator reachability exclude

- ip lisp map-cache-limit

- ip lisp map-cache drop native-forward map-request priority weight

- ip lisp map-request-source

- ip lisp map-resolver

- ip lisp map-server

- ip lisp map-server try-map-cache

- ip lisp multicast

- ip lisp nat-traversal

- ip lisp ntr

- ip lisp null0-is-alt-miss

- ip lisp proxy-etr

- ip lisp proxy-itr

- ip lisp short-map-cache-ttl

- ip lisp shortest-eid-prefix-length

- ip lisp source-locator

- ip lisp translate inside outside

- ip lisp use-bgp-locators

- ip lisp use-petr priority weight

- ip load-sharing address

- ip load-sharing per-packet

- ip local-proxy-arp

- ip local policy route-map

- ip mfwd event-history cli

- ip mfwd event-history l2

- ip mfwd event-history packet

- ip mfwd event-history vrf

- ip mfwd mstatic register

- ip mroute

- ip msdp description

- ip msdp event-history cli

- ip msdp event-history events

- ip msdp event-history routes

- ip msdp event-history tcp

- ip msdp flush-routes

- ip msdp group-limit source

- ip msdp keepalive

- ip msdp mesh-group

- ip msdp no-sa-data

- ip msdp originator-id

- ip msdp password

- ip msdp peer connect-source

- ip msdp reconnect-interval

- ip msdp redistribute

- ip msdp sa-interval

- ip msdp sa-limit

- ip msdp sa-policy in

- ip msdp sa-policy out

- ip msdp shutdown

- ip mtu eigrp

- ip multicast last-hop-meter

- ip multicast multipath

- ip multicast multipath resilient

- ip multicast rpf-meter

- ip multicast rpf mofrr

- ip name-server

- ip nat inside

- ip nat inside source

- ip nat outside source

- ip nat pool netmask

- ip nat pool netmask

- ip nat translation

- ip nat translation max-entries

- ip nat translation sampling-timeout

- ip next-hop-self eigrp

- ip offset-list eigrp

- ip ospf advertise-subnet

- ip ospf authentication-key

- ip ospf authentication

- ip ospf authentication key-chain

- ip ospf bfd

- ip ospf cost

- ip ospf dead-interval

- ip ospf event-history

- ip ospf event-history cli size

- ip ospf event-history detail size

- ip ospf flood-bw-percentage

- ip ospf hello-interval

- ip ospf message-digest-key md5

- ip ospf mtu-ignore

- ip ospf network broadcast

- ip ospf network point-to-point

- ip ospf passive-interface

- ip ospf priority

- ip ospf retransmit-interval

- ip ospf shutdown

- ip ospf transmit-delay

- ip passive-interface eigrp

- ip pim anycast-rp

- ip pim assert-pad

- ip pim assert-rate-limit

- ip pim auto-enable

- ip pim auto-rp listen

- ip pim auto-rp mapping-agent-policy

- ip pim auto-rp mapping-agent send-rp-discovery

- ip pim auto-rp rp-candidate-policy

- ip pim auto-rp rp-candidate send-rp-announce group-list route-map prefix-list

- ip pim bfd-instance

- ip pim bfd

- ip pim bidir-rp-limit

- ip pim border-router

- ip pim border

- ip pim bsr-candidate

- ip pim bsr bsr-policy

- ip pim bsr listen

- ip pim bsr rp-candidate-policy

- ip pim cpu-punt dr-only

- ip pim df-offer-burst-interval

- ip pim dr-delay

- ip pim dr-priority

- ip pim event-history assert

- ip pim event-history bidir

- ip pim event-history cli

- ip pim event-history data-register-receive

- ip pim event-history hello

- ip pim event-history join-prune-summary

- ip pim event-history join-prune-tw

- ip pim event-history join-prune

- ip pim event-history mrib

- ip pim event-history mvpn

- ip pim event-history null-register

- ip pim event-history packet

- ip pim event-history pim-library

- ip pim event-history rp

- ip pim event-history txlist

- ip pim event-history vpc

- ip pim event-history vrf

- ip pim file-debug

- ip pim flush-routes

- ip pim group-list

- ip pim hello-authentication ah-md5

- ip pim hello-interval

- ip pim jp-delay

- ip pim jp-interval

- ip pim jp-policy

- ip pim log-neighbor-changes

- ip pim mtu

- ip pim neighbor-policy prefix-list

- ip pim non-dr flood

- ip pim null-reg-delay

- ip pim null-reg-routes

- ip pim passive

- ip pim pre-build-spt

- ip pim register-policy

- ip pim register-rate-limit

- ip pim register-replicate

- ip pim register-source

- ip pim register-until-stop

- ip pim restart-congestion-period

- ip pim rp-address

- ip pim rp-candidate group-list route-map prefix-list

- ip pim sg-expiry-timer infinity

- ip pim sparse-mode

- ip pim ssm

- ip pim state-limit

- ip pim strict-rfc-compliant

- ip pim strict-rfc-compliant

- ip ping source-interface

- ip policy match router-address

- ip policy route-map

- ip port-unreachable

- ip port access-group

- ip port access-group

- ip prefix-list description

- ip prefix-list permit

- ip prefix-list seq permit

- ip proxy-arp

- ip radius source-interface

- ip redirects

- ip rip authentication key-chain

- ip rip authentication mode text

- ip rip metric

- ip rip passive-interface

- ip rip poison-reverse

- ip rip route-filter route in

- ip rip summary-address

- ip route

- ip route static bfd

- ip router eigrp

- ip router isis

- ip router ospf area

- ip router ospf multi-area

- ip router rip

- ip routing download-on-convergence

- ip routing event-history

- ip routing multicast enforce-rpf

- ip routing multicast event-history cli

- ip routing multicast event-history mdt

- ip routing multicast event-history mfdm-debugs

- ip routing multicast event-history mfdm-events

- ip routing multicast event-history mfdm-stats

- ip routing multicast event-history notify-clients

- ip routing multicast event-history rib-summary

- ip routing multicast event-history rib

- ip routing multicast event-history urib-debugs

- ip routing multicast event-history vrf

- ip routing multicast file-debug

- ip routing multicast holddown

- ip routing multicast software-replicate

- ip rsvp

- ip secondary

- ip sla

- ip sla group schedule

- ip sla logging traps

- ip sla reaction-configuration react

- ip sla reaction-trigger

- ip sla reset

- ip sla responder

- ip sla restart

- ip sla schedule

- ip source-route

- ip source binding vlan interface

- ip source icmp-errors

- ip split-horizon eigrp

- ip ssh source-interface

- ip sticky-arp

- ip summary-address eigrp ipv6 summary-address eigrp

- ip tacacs source-interface

- ip tcp path-mtu-discovery

- ip tcp synwait-time

- ip telnet source-interface

- ip tftp source-interface

- ip traceroute source-interface

- ip ttl

- ip unnumbered

- ip unreachables

- ip verify source dhcp-snooping-vlan

- ip verify unicast source reachable-via rx

- ipv6

- ipv6 access-class

- ipv6 access-list

- ipv6 access-list match-local-traffic

- ipv6 address

- ipv6 address dhcp

- ipv6 address secondary

- ipv6 address use-link-local-only

- ipv6 adjacency-stale-timer

- ipv6 adjacency forcedownload

- ipv6 adjacency l2fm-reg

- ipv6 adjacency peer-gmac

- ipv6 adjacency remote-adj

- ipv6 adjacency route distance

- ipv6 amt gateway

- ipv6 amt gateway send-discovery

- ipv6 amt relay

- ipv6 cache disable

- ipv6 dad

- ipv6 destination

- ipv6 dhcp relay

- ipv6 dhcp relay address

- ipv6 dhcp relay address ipv6 dhcp relay address

- ipv6 dhcp relay option type cisco

- ipv6 dhcp relay option vpn

- ipv6 dhcp relay source-interface

- ipv6 dhcp relay source-interface

- ipv6 flood unknown ucast

- ipv6 flow monitor input

- ipv6 flow monitor input

- ipv6 flow monitor input

- ipv6 flow monitor input

- ipv6 flow monitor output

- ipv6 flow monitor output

- ipv6 forward

- ipv6 host

- ipv6 icmp test rfc-4884

- ipv6 icmp vip vmac protocol group

- ipv6 link-local

- ipv6 local policy route-map

- ipv6 mroute

- ipv6 multicast last-hop-meter

- ipv6 multicast notify-interval

- ipv6 multicast rpf-meter

- ipv6 nd cache limit

- ipv6 nd dad attempts

- ipv6 nd hop-limit

- ipv6 nd limit-incomplete-adjacency

- ipv6 nd limit_threshold_am_queue

- ipv6 nd mac-extract

- ipv6 nd managed-config-flag

- ipv6 nd mtu

- ipv6 nd ns-interval

- ipv6 nd off-list timeout

- ipv6 nd other-config-flag

- ipv6 nd prefix

- ipv6 nd prefix default

- ipv6 nd process adjacency statistics

- ipv6 nd ra-interval

- ipv6 nd ra-lifetime

- ipv6 nd ra dns search-list sequence

- ipv6 nd ra dns search-list suppress

- ipv6 nd ra dns server sequence

- ipv6 nd ra dns server suppress

- ipv6 nd ra route suppress

- ipv6 nd raguard

- ipv6 nd reachable-time

- ipv6 nd retrans-timer

- ipv6 nd route route-preference High Low Medium infinite

- ipv6 nd router-preference High Low Medium

- ipv6 nd solicit-na accept

- ipv6 nd suppress-ra

- ipv6 nd synchronize

- ipv6 nd synchronize

- ipv6 neighbor

- ipv6 neighbor allow-static-neighbor-outside-subnet

- ipv6 pim anycast-rp

- ipv6 pim auto-rp listen

- ipv6 pim auto-rp mapping-agent-policy

- ipv6 pim auto-rp mapping-agent send-rp-discovery

- ipv6 pim auto-rp rp-candidate-policy

- ipv6 pim auto-rp rp-candidate send-rp-announce group

- ipv6 pim bidir-rp-limit

- ipv6 pim border

- ipv6 pim bsr-candidate

- ipv6 pim bsr bsr-policy

- ipv6 pim bsr listen

- ipv6 pim bsr rp-candidate-policy

- ipv6 pim dr-priority

- ipv6 pim event-history assert-receive

- ipv6 pim event-history bidir

- ipv6 pim event-history hello

- ipv6 pim event-history join-prune-summary

- ipv6 pim event-history join-prune

- ipv6 pim event-history null-register

- ipv6 pim event-history packet

- ipv6 pim event-history rp

- ipv6 pim event-history vrf

- ipv6 pim flush-routes

- ipv6 pim hello-authentication ah-md5

- ipv6 pim hello-interval

- ipv6 pim isolate

- ipv6 pim jp-delay

- ipv6 pim jp-policy

- ipv6 pim log-neighbor-changes

- ipv6 pim neighbor-policy

- ipv6 pim passive

- ipv6 pim register-policy

- ipv6 pim register-rate-limit

- ipv6 pim rp-address

- ipv6 pim rp-candidate group

- ipv6 pim sparse-mode

- ipv6 pim ssm

- ipv6 pim state-limit

- ipv6 pim use-shared-tree-only spt-threshold infinity group-list

- ipv6 policy route-map

- ipv6 port traffic-filter

- ipv6 prefix-list description

- ipv6 prefix-list permit

- ipv6 prefix-list seq permit

- ipv6 queue-packets-limit

- ipv6 queue-packets

- ipv6 redirects

- ipv6 route

- ipv6 route static bfd

- ipv6 router isis

- ipv6 router ospfv3 area

- ipv6 router ospfv3 multi-area

- ipv6 routing event-history size

- ipv6 routing multicast event-history cli

- ipv6 routing multicast event-history mfdm-debugs

- ipv6 routing multicast event-history mfdm-events

- ipv6 routing multicast event-history mfdm-stats

- ipv6 routing multicast event-history rib-summary

- ipv6 routing multicast event-history rib

- ipv6 routing multicast event-history vrf

- ipv6 routing multicast holddown

- ipv6 routing multicast software-replication

- ipv6 source-route

- ipv6 switch-packets

- ipv6 traffic-filter

- ipv6 unreachables

- ipv6 verify unicast source reachable-via rx

- ipv6 vip

- is-type

- ishow cli find nodes

- ishow cli modes

- ishow cli nodes

- ishow cli paths

- ishow cli tags

- ishow core backtrace

- isis authentication-check

- isis authentication-check level-1

- isis authentication-check level-2

- isis authentication-type cleartext

- isis authentication-type cleartext

- isis authentication key-chain

- isis authentication key-chain

- isis bfd

- isis circuit-type

- isis csnp-interval level

- isis event-history adjacency

- isis event-history cli

- isis event-history csnp

- isis event-history dis

- isis event-history events

- isis event-history graceful

- isis event-history ha

- isis event-history iih

- isis event-history lsp-flood

- isis event-history lsp-gen

- isis event-history mtr

- isis event-history psnp

- isis event-history redist

- isis event-history spf-leaf

- isis event-history spf-tree

- isis event-history tlv

- isis event-history urib

- isis hello-interval

- isis hello-interval level

- isis hello-multiplier

- isis hello-multiplier level

- isis hello-padding

- isis hello-padding always

- isis ipv6 bfd

- isis ipv6 metric

- isis lsp-interval

- isis mesh-group

- isis metric

- isis mtu-check

- isis mtu-check level

- isis network point-to-point

- isis passive-interface

- isis priority level

- isis retransmit-interval

- isis retransmit-throttle-interval

- isis shutdown

- isolate

- isolate

- isolate

- isolate

- isolate

- isolate

- isolate

- itd

- itd

- itd device-group

- itd device-group

- itd session access-list refresh

- itd session device-group

- itd statistics

- itd statistics

icmp-echo

[no] icmp-echo { <hostname> | <ip-address> | <ipv6-address> } { [ source-ip { <source-ip-hostname> | <source-ip-address> | <source-ipv6-address> } ] | [ source-interface <if_index> ] }

Syntax Description

no

(Optional)

source-ip

(Optional) source-interface

icmp-echo

ICMP Echo Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

source-interface

(Optional) Source Interface (ingress icmp packet interface)

if_index

(Optional) Source Interface

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

Command Mode

- /exec/configure/ip-sla

icmpv6 cache disable

[no] icmpv6 cache disable

Syntax Description

no

(Optional) Negate a command or set its defaults

icmpv6

ICMPv6 Commands

cache

Disable cache

disable

Disable cache

Command Mode

- /exec/configure

icmpv6 cfs-queue

{ icmpv6 cfs-queue <size> } | { no icmpv6 cfs-queue }

Syntax Description

no

Negate a command or set its defaults

icmpv6

ICMPv6 Commands

cfs-queue

cfs-queue

size

Size for adjacencies to be sent in CFSoE payload

Command Mode

- /exec/configure

icmpv6 library mts-queue

{ icmpv6 library mts-queue <size> } | { no icmpv6 library mts-queue }

Syntax Description

no

Negate a command or set its defaults

icmpv6

ICMPv6 Commands

library

library data queue

mts-queue

mts-queue

size

Size for icmpv6 data sap qlimit

Command Mode

- /exec/configure

icmpv6 mts-queue

{ icmpv6 mts-queue <size> } | { no icmpv6 mts-queue }

Syntax Description

no

Negate a command or set its defaults

icmpv6

ICMPv6 Commands

mts-queue

mts-queue

size

Size for icmpv6 data sap qlimit

Command Mode

- /exec/configure

import

import

Syntax Description

import

import

Command Mode

- /exec/configure

import interface

import interface <if0>

Syntax Description

import

import

interface

Interface configuration

if0

interface type and number in module/slot format

Command Mode

- /exec/configure

import l2vpn evpn

[ no | default ] import l2vpn evpn [ route-map <import-map> ] [ reoriginate ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

import

Import the routes into another AF

l2vpn

L2VPN

evpn

EVPN

reoriginate

(Optional) Reoriginate the route with new RT

route-map

(Optional) Apply route-map to specify import criteria

import-map

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6

import map

[no] import map <rmap-name> [ evpn ]

Syntax Description

no

(Optional) Negate a command or set its defaults

import

VRF import

map

Route-map based VRF import

rmap-name

Route-map name

evpn

(Optional) EVPN

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

import running-config

import running-config [ exclude interface ethernet ]

Syntax Description

import

import

running-config

running-config

exclude

(Optional) Exclude

interface

(Optional) Exclude all interfaces of this type

ethernet

(Optional) running-config excluding physical interfaces

Command Mode

- /exec/configure

import vpn unicast

[ no | default ] import vpn unicast [ route-map <import-map> ] [ reoriginate ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

import

Import the routes into another AF

vpn

L3VPN

unicast

unicast

reoriginate

(Optional) Reoriginate the route with new RT

route-map

(Optional) Apply route-map to specify import criteria

import-map

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

import vrf default map

import vrf default [ <prefix-limit> ] map <rmap-name> | no import vrf default [ <prefix-limit> ] map <rmap-name>

Syntax Description

no

Negate a command or set its defaults

import

VRF import

vrf

Virtual Router Context

default

VRF name (default)

prefix-limit

(Optional) Maximum prefix limit

map

Route-map based VRF import

rmap-name

Route-map name

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

in-label allocate

[no] in-label <static-inlabel> allocate [ policy { <prefix> <mask> | <prefix-mask> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

in-label

Configure local label assignment and forwarding for the LSP

allocate

Allocate this label

policy

(Optional) Allocate policy-based IP prefix

static-inlabel

Label Value

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

prefix-mask

(Optional) Destination prefix/mask

Command Mode

- /exec/configure/mpls_static/ipv4/lsp

in-order-guarantee

[no] in-order-guarantee

Syntax Description

no

(Optional) Negate a command or set its defaults

in-order-guarantee

Enable IOD

Command Mode

- /exec/configure/policy-map/type/uf/class

include profile

[no] include profile { <all_conf_profile_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

include

Include a port-profile

profile

config-profile

all_conf_profile_name

Enter the name of the profile

Command Mode

- /exec/configure

include profile any

[no] include profile any

Syntax Description

no

(Optional) Negate a command or set its defaults

include

Include a port-profile

profile

config-profile

any

dynamically include profile during apply

Command Mode

- /exec/configure

index next

{ { index <index> { next-address [ loose | strict ] <ipaddr> | exclude-address <ipaddr> } } | { no index <index> } }

Syntax Description

no

Negate a command or set its defaults

index

Specify the next entry index to add, edit (or delete)

index

Previous index number

next-address

Specify the next address in the path

loose

(Optional) Target address is loose

strict

(Optional) Target address is strict

exclude-address

Exclude an address from subsequent partial path segments

ipaddr

Enter IP address (A.B.C.D)

Command Mode

- /exec/configure/te/expl-path

ingress-replication

ingress-replication <addr>

Syntax Description

ingress-replication

Configure ingress replication

addr

Remote Peer IP Address

Command Mode

- /exec/configure/if-nve/vni

ingress-replication protocol bgp

[no] ingress-replication protocol bgp

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress-replication

Configure ingress replication

protocol

Control protocol to use

bgp

Border Gateway Protocol

Command Mode

- /exec/configure/if-nve/vni

ingress-replication protocol static

[no] ingress-replication protocol static

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress-replication

Configure ingress replication

protocol

Control protocol to use

static

Static End-point Configuration

Command Mode

- /exec/configure/if-nve/vni

ingress

{ ingress <ifh> | no ingress }

Syntax Description

no

Negate a command or set its defaults

ingress

Ingress interface to determine enhanced forwarding enabled

ifh

Name of the interface for ngoam on which fabric forwarding is configured

Command Mode

- /exec/configure/configngoamprofile

ingress interface

[no] ingress interface <interface-ref> [ next-hop <ip-addr> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress

ITD ingress interface

interface

ITD ingress interface

interface-ref

next-hop

(Optional) next hop ip address

ip-addr

(Optional) Next hop IPv4 address connected to ingress intrerface

Command Mode

- /exec/configure/itd /exec/configure/itd-inout

ingress interface

[no] ingress interface <interface-ref>

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress

ITD ingress interface

interface

ITD ingress interface

interface-ref

Command Mode

- /exec/configure/itd /exec/configure/itd-inout

inherit peer-policy

[no] inherit peer-policy <peer-policy-template-name> <policy-preference>

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer-policy

Inherit a peer-policy template

peer-policy-template-name

Template name

policy-preference

Sequence number

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

inherit peer-policy

[no] inherit peer-policy <peer-policy-template-name> <policy-preference>

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer-policy

Inherit a peer-policy template

peer-policy-template-name

Template name

policy-preference

Sequence number

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

inherit peer-session

[no] inherit peer-session <peer-session-template-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer-session

Inherit a peer-session template

peer-session-template-name

Template name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

inherit peer

[no] inherit peer <peer-template-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer

Inherit a peer template

peer-template-name

Peer template name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

inherit port-profile

[no] inherit port-profile { <s0> | <s1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a port-profile

port-profile

Inherit a port-profile

s0

Enter the name of the profile

s1

Enter the name of the profile

Command Mode

- /exec/configure/if-any /exec/configure/if-port-channel exec/configure/if-port-channel-range /exec/configure/if-ethernet-m /exec/configure/if-ethernet-switch-m /exec/configure/if-te /exec/configure/if-pseudowire

initial-delay

[no] initial-delay <time-in-sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

initial-delay

Configure delay interval to connect to the BMP server

time-in-sec

Delay value

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

initial-refresh skip

[no] initial-refresh { skip | delay <time-in-sec> }

Syntax Description

no

(Optional) Negate a command or set its defaults

initial-refresh

Configure initial-refresh for the BMP server

skip

Skip sending the initial route update to the BMP server

delay

Delay after which the initial route update is sent to the BMP server

time-in-sec

Delay value

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

inject-map exist-map

[no] inject-map <inject-map-name> exist-map <exist-map-name> [ copy-attributes ]

Syntax Description

no

(Optional) Negate a command or set its defaults

inject-map

Routemap which specifies prefixes to inject

inject-map-name

Route-map name

exist-map

Routemap which specifies exist condition

exist-map-name

Route-map name

copy-attributes

(Optional) Copy attributes from aggregate

Command Mode

- /exec/configure/router-bgp/router-bgp-af

install activate

install activate <patch> + [ forced ]

Syntax Description

install

Install package

activate

Activate package

patch

Package Name

forced

(Optional) non-interactive

Command Mode

- /exec

install add

install add { <package-name> | <uri1> } [ vrf <vrf-known-name> ] [ [ activate [ upgrade | downgrade ] ] [ forced ] ]

Syntax Description

install

Install package

add

Add package

package-name

Package name

uri1

Enter package uri

vrf

(Optional) Display per-VRF information

vrf-known-name

(Optional) Known VRF name

activate

(Optional) Activate package

forced

(Optional) non-interactive

upgrade

(Optional) Upgrade package

downgrade

(Optional) Downgrade package

Command Mode

- /exec

install all

install { all [ nxos <uri> | kickstart <uri1> | system <uri3> | serial ] + [ force ] [ non-disruptive | no-reload | noswitchover ] [ bios | no-save ] [ bios-force ] [ non-interruptive ] [ compact ] | force-all [ nxos <uri> | serial ] + [ non-disruptive ] [ force ] }

Syntax Description

install

upgrade software

all

Upgrade the system

kickstart

(Optional) boot-variable name

uri1

(Optional) Enter image uri

system

(Optional) boot-variable name

uri3

(Optional) Enter image uri

no-reload

(Optional) Exit right before reload during install.

noswitchover

(Optional) Exit right before reload during install.

non-interruptive

(Optional) Non-Interruptive install.

no-save

(Optional) Config not saved. Manually save config before starting install all

bios

(Optional) BIOS Only

bios-force

(Optional) Forcefully upgrade bios.

force

(Optional) Forcefully allow ISSU with target image .

non-disruptive

(Optional) Non-Disruptive install.

compact

(Optional) Compact image to make it nexus 3k only

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

serial

(Optional) Upgrade linecards in serial

force-all

Force upgrade the system

Command Mode

- /exec

install commit

install commit [ <patch> ]

Syntax Description

install

Install package

commit

Commit software patch

patch

(Optional) Package Name

Command Mode

- /exec

install deactivate

install deactivate <patch> + [ forced ]

Syntax Description

install

Install package

deactivate

Deactivate package

patch

Package Name

forced

(Optional) non-interactive

Command Mode

- /exec

install epld

install epld <uri1> { { module { <module> } { primary | golden } [ force ] } }

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

module

Enter the module number to be upgraded

primary

Upgrade primary fpga image

golden

Upgrade golden fpga image

force

(Optional) Force Install EPLD from EPLD image

Command Mode

- /exec

install epld

install epld <uri1> { { module { <module> } [ force ] } }

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

module

Enter the module number to be upgraded

force

(Optional) Force Install EPLD from EPLD image

Command Mode

- /exec

install epld

install epld <uri1> { { module { all } [ force ] } }

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

all

Install all the modules

force

(Optional) Force Install EPLD from EPLD image

Command Mode

- /exec

install epld

install epld <uri1> { { module { all } { primary | golden } [ force ] } }

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

all

Install all the modules

primary

Upgrade primary fpga image

golden

Upgrade golden fpga image

force

(Optional) Force Install EPLD from EPLD image

Command Mode

- /exec

install epld psu

install epld <uri1> psu

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

psu

Upgrade PSU firmware

Command Mode

- /exec

install feature-set fcoe-npv

[no] install feature-set fcoe-npv

Syntax Description

no

(Optional) Negate a command or set its defaults

install

install a feature-set

feature-set

install feature-set

fcoe-npv

FCOE-NPV

Command Mode

- /exec/configure

install feature-set mpls

[no] install feature-set mpls

Syntax Description

no

(Optional) Negate a command or set its defaults

install

install a feature-set

feature-set

install feature-set

mpls

MPLS

Command Mode

- /exec/configure

install license

install license <uri0> [ <s0> ]

Syntax Description

install

upgrade software

license

install license

uri0

Specify URL for license file

s0

(Optional) Specify a target name for the license file

Command Mode

- /exec

install module

install module <module> { bios [ [ system <uri0> ] [ forced2 ] ] | bios [ primary | golden ] [ forced ] | image [ { forced1 | system1 <uri1> } ] }

Syntax Description

install

upgrade software

module

Upgrade for module

module

Enter module index

bios

Upgrade module bios

system

(Optional) System Image

uri0

(Optional) Local URI containing the system Image

forced2

(Optional) Force install bios

primary

(Optional) Upgrade the Primary bios

golden

(Optional) Upgrade the Golden bios

forced

(Optional) Force install bios

image

Upgrade module image

forced1

(Optional) Bypass SRG check

system1

(Optional) System Image

uri1

(Optional) Local URI containing the system Image

Command Mode

- /exec

install remove

install remove { <patch> | inactive } [ forced ]

Syntax Description

install

Install package

remove

Remove package

patch

Package Name

inactive

All inactive except non-committed packages

forced

(Optional) Remove package

Command Mode

- /exec

install reset

install reset

Syntax Description

install

Install package

reset

Reset software patches and packages to base version

Command Mode

- /exec

Usage Guidelines

Use this command to remove all application persistency files such as patch rpms, third party rpms, and application configuration in the /etc directory other than configuration.

instance-id

[no] instance-id <iid>

Syntax Description

no

(Optional) Negate a command or set its defaults

instance-id

Configures Instance-ID for global data-mappings

iid

24-bit instance-ID value

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

instance

[no] instance <plistinst> [ cross-check ] | instance <plistinst>

Syntax Description

no

Negate a command or set its defaults

instance

Configure a parameter list instance

plistinst

Enter the name of the parameter list instance

cross-check

(Optional) Explicitly search for referencing config profile

Command Mode

- /exec/configure/param-list

instance

[no] instance <instance-id> [ vlan <vlan-list> ]

Syntax Description

no

Negate a command or set its defaults

instance

Map vlans to an MST instance

instance-id

MST instance id

vlan

(Optional) Range of vlans to add to the instance mapping

vlan-list

(Optional) vlan range ex: 1-65, 72, 200 - 300

Command Mode

- /exec/configure/spanning-tree/mst/configuration

instance vlan

instance <instance-id> vlan <vlan-list>

Syntax Description

instance

Map vlans to an MST instance

instance-id

MST instance id

vlan

Range of vlans to add to the instance mapping

vlan-list

vlan range ex: 1-65, 72, 200 - 300

Command Mode

- /exec/configure/spanning-tree/mst/configuration

interface-vlan reset credits

interface-vlan reset credits [ <count> ]

Syntax Description

interface-vlan

Vlan Interface

reset

Reset SVI Credits

credits

SVI Credits

count

(Optional) Set SVI Credit Count

Command Mode

- /exec/configure

interface-vlan reset fsm

interface-vlan <vlan-id> reset fsm

Syntax Description

interface-vlan

Vlan Interface

vlan-id

VLAN Id

reset

Reset SVI Credits

fsm

SVI FSM

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

{ interface <interface-range> } | { no interface }

Syntax Description

no

Negate a command or set its defaults

interface

Configure ngoam egress interface

interface-range

Configure ngoam egress interface

Command Mode

- /exec/configure/configngoamprofile

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

interface <interface>

Syntax Description

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface

[no] interface <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name

Command Mode

- /exec/configure

interface breakout module

[no] interface breakout module <module> [ map <breakout_map> ]

Syntax Description

no

Negate a command or set its defaults

interface

Configure interfaces

breakout

Configuring the breakout for a module

module

High Bandwidth Module

module

High Bandwidth Module number

map

(Optional) Breakout Map

breakout_map

(Optional) Breakout Map to be applied to all the ports in this module

Command Mode

- /exec/configure

interface breakout module

interface breakout module <module> [ map <breakout_map> ]

Syntax Description

interface

Configure interfaces

breakout

Configuring the breakout for a module

module

High Bandwidth Module

module

High Bandwidth Module number

map

(Optional) Breakout Map

breakout_map

(Optional) Breakout Map to be applied to all the ports in this module

Command Mode

- /exec/configure

interface breakout module port map

interface breakout module <module> port <port_num> map <breakout_map>

Syntax Description

interface

Configure interfaces

breakout

Configuring the breakout for an interface

module

High Bandwidth Module

module

High Bandwidth Module number

port

High Bandwidth Port(HBP)

port_num

Parent(HBP / Front-panel) port to be broken out

map

Breakout Map

breakout_map

Breakout Map to be applied to the parent port

Command Mode

- /exec/configure

interface breakout module port map

[no] interface breakout module <module> port <port_num> map <breakout_map>

Syntax Description

no

Negate a command or set its defaults

interface

Configure interfaces

breakout

Configuring the breakout for an interface

module

High Bandwidth Module

module

High Bandwidth Module number

port

High Bandwidth Port(HBP)

port_num

Parent(HBP / Front-panel) port to be broken out

map

Breakout Map

breakout_map

Breakout Map to be applied to the parent port

Command Mode

- /exec/configure

interface down delay

[no] interface down delay |

Syntax Description

down

delay

no

Negate a command or set its defaults

interface

Add tunnel interface config

delay

Tunnel interface down delay config

Command Mode

- /exec/configure/if-te

interop-enable

[no] interop-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

interop-enable

Enable interoperability with IOS XR boxes in the network

Command Mode

- /exec/configure/otv-isis

ip

ip [ <ipaddress> | <ipprefix> ] | no ip [ <ipaddress> | <ipprefix> ]

Syntax Description

no

Negate a command or set its defaults

ip

Enable HSRP IPv4 and set the virtual IP address

ipaddress

(Optional) Virtual IP address

ipprefix

(Optional) Virtual IP address and mask length

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4

ip

[no] ip <ipaddr>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

ip address of redundancy group member

ipaddr

Redundancy-group node IP address

Command Mode

- /exec/configure/if-nve/rgrp

ip

[no] ip { { group <gaddr> } | { group-range <gaddr_start> to <gaddr_end> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP Address

group

Multicast group

gaddr

IPv4 group address

group-range

Multicast Group address range

gaddr_start

First Group address

to

Range

gaddr_end

Last Group address

Command Mode

- /exec/configure/nbm-flow/policy

ip

[no] ip [ <ipaddress> [ secondary ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Set Virtual IP address

ipaddress

(Optional) Virtual IP address

secondary

(Optional) Make this a secondary IP address

Command Mode

- /exec/configure/if-eth-any/glbp

ip

ip { <ipv6address> | autoconfig } | no ip [ { <ipv6address> | autoconfig } ]

Syntax Description

no

Negate a command or set its defaults

ip

Enable HSRP IPv6 and set the virtual IP address

autoconfig

Obtain address using autoconfiguration

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv6

ip access-class

[no] ip access-class <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

access-class

Specify IPv4 access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/line

ip access-group

[no] ip access-group <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

access-group

Specify access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/if-set-acl-l3

ip access-list

[no] ip access-list <name> [ client <clienttype> <clientID> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

access-list

Configure access list

name

List name

client

(Optional) set client type

clienttype

(Optional) CLI/ONEP

clientID

(Optional) client appID

Command Mode

- /exec/configure

ip access-list match-local-traffic

[no] ip access-list match-local-traffic | ip access-list match-local-traffic

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

access-list

Configure access list

match-local-traffic

Enable access-list matching for locally generated traffic

Command Mode

- /exec/configure

ip address

[no] ip address [ { <ip-addr> <ip-mask> | <ip-prefix> } [ route-preference <pref> ] [ tag <tag> ] ] | ip address { <ip-addr> <ip-mask> | <ip-prefix> } [ route-preference <pref> ] [ tag <tag> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

ip-addr

(Optional) IP address in format i.i.i.i

ip-mask

(Optional) IP network mask in format m.m.m.m

ip-prefix

(Optional) IP prefix and network mask length in format x.x.x.x/m

route-preference

(Optional) URIB route preference for local/direct routes

pref

(Optional) Local/direct route preference

tag

(Optional) URIB route tag value for local/direct routes

tag

(Optional) Local/direct tag value

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-mpls-tunnel /exec/configure/if-gre-tunnel /exec/configure/if-vsan /exec/configure/if-cpp

ip address dhcp

[no] ip address dhcp

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

dhcp

Configure IP address from a dhcp server

Command Mode

- /exec/configure/if-vlan /exec/configure/if-ethernet /exec/configure/if-mgmt-config /exec/configure/if-ethernet-all /exec/configure/if-sub

ip address secondary

[no] ip address { <ip-addr> <ip-mask> | <ip-prefix> } secondary [ route-preference <pref> ] [ tag <tag> ] | ip address { <ip-addr> <ip-mask> | <ip-prefix> } secondary [ route-preference <pref> ] [ tag <tag> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip-prefix

IP prefix and network mask length in format x.x.x.x/m

secondary

Configure additional IP addresses on interface

route-preference

(Optional) URIB route preference for local/direct routes

pref

(Optional) Local/direct route preference

tag

(Optional) URIB route tag value for local/direct routes

tag

(Optional) Local/direct tag value

Command Mode

- /exec/configure/if-igp /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-vsan /exec/configure/if-cpp

ip adjacency cache disable

[no] ip adjacency cache disable

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

cache

Disable cache

disable

Disable cache

Command Mode

- /exec/configure

ip adjacency forcedownload

ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ip-addr> } | * } forcedownload

Syntax Description

ip

Configure IP features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

ip-addr

IPV4 source address

*

for all adjacencies in this context

forcedownload

Create consistancy in UFDM

Command Mode

- /exec/configure

ip adjacency l2fm-reg

[no] ip adjacency l2fm-reg { [ vrf <vrf-known-name> ] | <interface> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

l2fm-reg

Register with l2fm

vrf

(Optional) vrf name

vrf-known-name

(Optional) Known VRF name

interface

Interface name

Command Mode

- /exec/configure

ip adjacency notify interval

{ ip adjacency notify interval <time> } | { no ip adjacency notify interval }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

notify

Notify URIB/FIB

interval

Time interval

time

value in milli seconds

Command Mode

- /exec/configure

ip adjacency peer-gmac

[no] ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ip-addr> } | * } peer-gmac

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

ip-addr

IPV4 source address

*

for all adjacencies in this context

peer-gmac

Set/clear the peer-gmac bit

Command Mode

- /exec/configure

ip adjacency remote-adj

[no] ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ip-addr> } | * } remote-adj

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

ip-addr

IPV4 source address

*

for all adjacencies in this context

remote-adj

Set/clear the remote-adj bit

Command Mode

- /exec/configure

ip adjacency route distance

{ ip adjacency route distance <pref> } | { no ip adjacency route distance }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

route

route

distance

admin-distance

pref

preference

Command Mode

- /exec/configure

ip adjacency statistics collect

{ ip adjacency statistics collect } | { no ip adjacency statistics collect }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

statistics

Statistics

collect

Collection

Command Mode

- /exec/configure

ip adjacency statistics interval

{ ip adjacency statistics interval <time> } | { no ip adjacency statistics interval }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

statistics

Statistics

interval

Interval

time

Timer timeout value

Command Mode

- /exec/configure

ip allow address-overlap

[no] ip allow address-overlap

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

allow

Allow interface IP address overlap

address-overlap

Allow interface IP address overlap

Command Mode

- /exec/configure

ip allow port

{ ip allow port { <allow_ports> | none } | no ip allow port [ <allow_ports> | none ] }

Syntax Description

no

Negate a command or set its defaults

ip

IP protocol

port

Well known UDP/TCP ports

allow

Restrict the set of allowed ports

allow_ports

Comma separated list of ports or ranges

none

Disallow binding to any ports

Command Mode

- /exec/configure/virt-serv

ip amt anycast-gateway-address

{ { ip amt anycast-gateway-address <address> } | { no ip amt anycast-gateway-address [ <address> ] } | { ipv6 amt anycast-gateway-address <address6> } | { no ipv6 amt anycast-gateway-address [ <address6> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

anycast-gateway-address

Configure anycast address for AMT gateway

address

IP anycast address of AMT gateway

Command Mode

- /exec/configure /exec/configure/vrf

ip amt anycast-relay-prefix

{ { ip amt anycast-relay-prefix <prefix> } | { no ip amt anycast-relay-prefix [ <prefix> ] } | { ipv6 amt anycast-relay-prefix <prefix6> } | { no ipv6 amt anycast-relay-prefix [ <prefix6> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

anycast-relay-prefix

Configure anycast prefix for AMT relay

prefix

IP anycast prefix for AMT relay

Command Mode

- /exec/configure /exec/configure/vrf

ip amt gateway

[no] ip amt gateway

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

amt

AMT global configuration commands

gateway

Configures IPv4 AMT gateway functionality

Command Mode

- /exec/configure /exec/configure/vrf

ip amt gateway send-discovery

[no] ip amt gateway send-discovery

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

amt

AMT global configuration commands

gateway

Configures IP AMT gateway functionality

send-discovery

Trigger a Discovery message to the Anycast address

Command Mode

- /exec/configure /exec/configure/vrf

ip amt join-policy

{ [ no ] { ip | ipv6 } amt join-policy <jroute-map> [ gateway <groute-map> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

join-policy

Configures what (S,G) are allowed to be joined

jroute-map

Route-map describing (S,G) entries allowed

gateway

(Optional) Configure join-policy per gateway

groute-map

(Optional) Route-map describing gateway or sets of gateways

Command Mode

- /exec/configure /exec/configure/vrf

ip amt qqic

[no] { ip | ipv6 } amt qqic <qqic-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

qqic

Configure Querier's Query Interval Code

qqic-value

QQIC value

Command Mode

- /exec/configure /exec/configure/vrf

ip amt relay-advertisement-address

{ { ip amt relay-advertisement-address <address> } | { no ip amt relay-advertisement-address [ <address> ] } | { ipv6 amt relay-advertisement-address <address6> } | { no ipv6 amt relay-advertisement-address [ <address6> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

relay-advertisement-address

Address to use by AMT relay

address

IP unicast address for AMT relay to use

Command Mode

- /exec/configure /exec/configure/vrf

ip amt relay

[no] ip amt relay

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

amt

AMT global configuration commands

relay

Configures IPv4 AMT relay functionality

Command Mode

- /exec/configure /exec/configure/vrf

ip amt state-limit

{ [ no ] { ip | ipv6 } amt state-limit <limit> [ gateway <route-map> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

state-limit

Configure the maximum number of (S,G) entries allowed

limit

Number of entries total or per AMT gateway

gateway

(Optional) Configure state limit per gateway

route-map

(Optional) Route-map describing gateway or sets of gateways

Command Mode

- /exec/configure /exec/configure/vrf

ip amt tunnel-limit

{ { { ip | ipv6 } amt tunnel-limit <limit> } | { no { ip | ipv6 } amt tunnel-limit [ <limit> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

tunnel-limit

Configure the maximum tunnels allowed

limit

Number of tunnels

Command Mode

- /exec/configure /exec/configure/vrf

ip arp

{ ip arp <ip-address> <mac-address> | no ip arp <ip-address> [ <mac-address> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

ip-address

IP address

mac-address

MAC address

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

ip arp

{ ip arp { [ am mts-batch <batch-timer> ] | [ lookup_timeout <l2rib-timer> ] } }

Syntax Description

ip

Configure IP features

arp

Configure ARP parameters

am

(Optional) Adjacency Manager

mts-batch

(Optional) Configure ARP-AM mts batch count

lookup_timeout

(Optional) arp_l2rib_lookup_timeout

batch-timer

(Optional) Interval in milliseconds

l2rib-timer

(Optional) Interval in seconds

Command Mode

- /exec/configure

ip arp allow-static-arp-outside-subnet

[no] ip arp allow-static-arp-outside-subnet

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

allow-static-arp-outside-subnet

Allow static ARP outside interface subnet

Command Mode

- /exec/configure

ip arp broadcast mac-mismatch

{ ip arp broadcast mac-mismatch } | { no ip arp broadcast mac-mismatch }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

broadcast

Enable/disable arp broadcasr

mac-mismatch

when there is a smac mismatch

Command Mode

- /exec/configure

ip arp cache disable

[no] ip arp cache disable

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

cache

Disable cache

disable

Disable cache

Command Mode

- /exec/configure

ip arp cache limit

{ { ip arp cache limit <max> } | { no ip arp cache limit } } [ syslog <rate> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

cache

ARP cache parameters

limit

Limit size of ARP adjacencies cache

max

Maximum number of ARP entries

syslog

(Optional) Syslog messages

rate

(Optional) Syslogs per second

Command Mode

- /exec/configure

ip arp cfs-queue

{ ip arp cfs-queue <size> } | { no ip arp cfs-queue }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

ARP

cfs-queue

cfs-queue

size

Size for adjacencies to be sent in CFSoE payload

Command Mode

- /exec/configure

ip arp cos

{ ip arp cos <cosval> } | { no ip arp cos }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

cos

COS for ARP packet

cosval

COS value

Command Mode

- /exec/configure

ip arp delete-adj-on-mac-delete

[no] ip arp delete-adj-on-mac-delete

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

delete-adj-on-mac-delete

Delete the adjacency on MAC delete

Command Mode

- /exec/configure/if-vlan-common

ip arp event-history size

[no] ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli | suppression-event | suppression-errors | dme-event } size { <size_in_Kbytes> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP events

arp

Configure ARP parameters

event-history

log debug events into event history buffer

packet

inst packet logs

event

Internal event logs

sync-event

CFS and MCECM related event logs

ip-sync-event

L3 over vpc events

control

ARP control event logs

ha

HA and GR logs

errors

inst error logs

lcache

lcache logs

lcache-errors

lcache_error logs

client-event

Client_event logs

client-errors

Client_error logs

cli

cli logs

snmp

SNMP logs

suppression-event

ARP suppression event logs

suppression-errors

ARP suppression error logs

dme-event

ARP DME event logs

size

Configure the size of the event-hist buffer

size_in_Kbytes

Size of the file in kbytes

Command Mode

- /exec/configure

ip arp event-history size

[no] ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli | suppression-event | suppression-errors | controller-errors | dme-event } size { <size_in_text> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP events

arp

Configure ARP parameters

event-history

log debug events into event history buffer

packet

inst packet logs

event

Internal event logs

sync-event

CFS and MCECM related event logs

ip-sync-event

L3 over vpc events

control

ARP control event logs

ha

HA and GR logs

errors

inst error logs

lcache

lcache logs

lcache-errors

lcache_error logs

client-event

Client_event logs

client-errors

Client_error logs

cli

cli logs

snmp

SNMP logs

suppression-event

ARP suppression event logs

suppression-errors

ARP suppression error logs

controller-errors

Controller MAC-IP route error logs

dme-event

ARP DME event logs

size

Configure the size of the event-hist buffer

size_in_text

Buffer size

Command Mode

- /exec/configure

ip arp garp-storm

{ ip arp garp-storm } | { no ip arp garp-storm }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

garp-storm

Configure timer values for garp-storm

Command Mode

- /exec/configure

ip arp garp-storm timer count

{ ip arp garp-storm timer <garp-timer> count <garp-count> } | { no ip arp garp-storm timer <garp-timer> count <garp-count> }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

garp-storm

Configure timer values for garp-storm

timer

Set the garp-storm timer value in seconds

garp-timer

Timer value in seconds

count

Set the garp count value

garp-count

Timer value in seconds

Command Mode

- /exec/configure

ip arp gratuitous hsrp duplicate

{ ip arp gratuitous hsrp duplicate | no ip arp gratuitous hsrp duplicate }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

gratuitous

gratuitous

hsrp

hsrp

duplicate

duplicate address detection

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

ip arp gratuitous request

{ ip arp gratuitous request | no ip arp gratuitous request }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

gratuitous

gratuitous

request

Enable/Disable sending grat. arp request when duplicate address detected

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan

ip arp gratuitous update

{ ip arp gratuitous update | no ip arp gratuitous update }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

gratuitous

gratuitous

update

Enable/Disable arp cache updates for gratuitous arp

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

ip arp inspection filter vlan

[no] ip arp inspection filter <arp-acl-name> vlan <vlan-range>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

filter

Filter

arp-acl-name

Access list name

vlan

Vlan range

vlan-range

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

ip arp inspection log-buffer entries

[no] ip arp inspection log-buffer { entries <number1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

log-buffer

Log Buffer Configuration

entries

Number of entries for log buffer

number1

Number of entries for log buffer

Command Mode

- /exec/configure

ip arp inspection trust

[no] ip arp inspection trust

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

trust

Configure trust state

Command Mode

- /exec/configure/if-switching

ip arp inspection validate

[no] ip arp inspection validate { src-mac | dst-mac | ip1 } +

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

validate

Validate addresses

src-mac

Validate source MAC address

dst-mac

Validate destination MAC address

ip1

Validate IP addresses

Command Mode

- /exec/configure

ip arp inspection vlan

[no] ip arp inspection vlan <vlan-id> [ logging { dhcp-bindings { permit | all | inone } } ]

Syntax Description

logging

(Optional) dhcp-bindings

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

vlan

Enable/Disable ARP Inspection on vlans

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

dhcp-bindings

(Optional) Logging of packet that match DHCP bindings

permit

(Optional) Log DHCP Binding Permitted packets

all

(Optional) Log all packets that match DHCP bindings

inone

(Optional) Do not log packets

Command Mode

- /exec/configure

ip arp mts-queue

{ ip arp mts-queue <size> } | { no ip arp mts-queue }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

ARP

mts-queue

mts-queue

size

Size for arp data sap qlimit

Command Mode

- /exec/configure

ip arp off-list timeout

{ ip arp off-list timeout <time> } | { no ip arp off-list timeout }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

off-list

off-list

timeout

Expire time

time

Expire time value in seconds

Command Mode

- /exec/configure

ip arp rarp fabric-forwarding

[no] ip arp rarp fabric-forwarding

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

rarp

Enable/Disable forwarding of RARP messages on fabric

fabric-forwarding

Forward RARP requests to the fabric

Command Mode

- /exec/configure

ip arp rarp fabric-forwarding rate-limit

[no] ip arp rarp fabric-forwarding rate-limit <rate>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

rarp

Enable/Disable forwarding of RARP messages on fabric

fabric-forwarding

Forward RARP requests to the fabric

rate-limit

Forwarding rate of the RARP frames

rate

RARP frames-per-second

Command Mode

- /exec/configure

ip arp request

ip arp request <ip-address>

Syntax Description

ip

Configure IP features

arp

Configure ARP parameters

request

Trigger ARP request

ip-address

IP address

Command Mode

- /exec/configure/if-igp

ip arp suppression-cache

ip arp suppression-cache { [ clear { local | remote } vlan <vlan-id> [ <ip-address> ] ] | [ download remote vlan <vlan-id> [ <ip-address> ] ] }

Syntax Description

clear

(Optional) Clear ARP suppression cache entries

ip

Clear IP commands

download

(Optional) download local entires from ARP cache, remote from l2rib

arp

Clear ARP table and statistics

suppression-cache

ARP-suppression cache

local

(Optional) Local entries

remote

(Optional) Remote entries

vlan

(Optional) Vlan id

vlan-id

(Optional) Vlan

ip-address

(Optional) IP address

Command Mode

- /exec

ip arp suppression testnum

ip arp suppression testnum <testnum> [ { <ip-address> <mac-address> <vlan_id> <interface> <phy-interface> } <count> ]

Syntax Description

ip

Configure IP features

arp

Configure ARP parameters

suppression

ARP-suppression based event

testnum

test case number

testnum

id of test (1-100)

ip-address

(Optional) IP address

mac-address

(Optional) MAC address

vlan_id

(Optional) Vlan

interface

(Optional) ARP interface

phy-interface

(Optional) ARP interface

count

(Optional) no of adjacencies needed

Command Mode

- /exec/configure

ip arp suppression timeout

{ ip arp suppression timeout <time-out> } | { no ip arp suppression timeout }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

suppression

ARP-suppression based event

timeout

ARP timeout

time-out

Time-out value in seconds. Time-out = 0 indicates disabled

Command Mode

- /exec/configure

ip arp synchronize

[no] ip arp synchronize

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

ARP

synchronize

CFS synchronize

Command Mode

- /exec/configure/vpc-domain

ip arp synchronize pull

ip arp synchronize pull

Syntax Description

ip

Configure IP features

arp

ARP

synchronize

CFS synchronize

pull

Initiate CFS pull request

Command Mode

- /exec

ip arp synchronize push

ip arp synchronize push

Syntax Description

ip

Configure IP features

arp

ARP

synchronize

CFS synchronize

push

Initiate CFS push message

Command Mode

- /exec

ip arp test

{ ip arp test <ip-address> <mac-address> <mode> | no ip arp test <ip-address> [ <mac-address> ] <mode> }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

test

test command

ip-address

IP address

mac-address

MAC address

mode

Mode: 1 - Data plane, 2 - Control plane, 3 - Peer Sync

Command Mode

- /exec/configure/if-vlan-common

ip arp timeout

{ ip arp timeout <time-out> } | { no ip arp timeout }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

timeout

ARP timeout

time-out

Time-out value in seconds

Command Mode

- /exec/configure/config-mgmt /exec/configure/if-igp

ip arp timeout

{ ip arp timeout <time-out> } | { no ip arp timeout }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

timeout

ARP timeout

time-out

Time-out value in seconds

Command Mode

- /exec/configure

ip as-path access-list deny

{ ip as-path access-list <aspl-name> [ timeout <sec> ] { { deny | permit } <line> } } | { no ip as-path access-list <aspl-name> [ timeout <sec> ] [ { deny | permit } <line> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

as-path

BGP autonomous system path filter

access-list

Specify an access list name

aspl-name

AS path access list name

aspl-name

Known as-path access-list name

timeout

(Optional) Timeout to be used for checking regex cpu hog

sec

(Optional) No. of seconds used as timeout

deny

Specify packets to reject

permit

Specify packets to forward

line

A

Command Mode

- /exec/configure

ip as-path access-list deny

{ ip as-path access-list <aspl-name> [ timeout <sec> ] { { deny | permit } <line> } } | { no ip as-path access-list <aspl-name> [ timeout <sec> ] [ { deny | permit } <line> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

as-path

BGP autonomous system path filter

access-list

Specify an access list name

aspl-name

AS path access list name

aspl-name

Known as-path access-list name

timeout

(Optional) Timeout to be used for checking regex cpu hog

sec

(Optional) No. of seconds used as timeout

deny

Specify packets to reject

permit

Specify packets to forward

line

A

Command Mode

- /exec/configure

ip as-path access-list seq deny

{ ip as-path access-list <aspl-name> seq <seq> [ timeout <sec> ] { { deny | permit } <line> } } | { no ip as-path access-list <aspl-name> seq <seq> [ timeout <sec> ] [ { deny | permit } <line> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

as-path

BGP autonomous system path filter

access-list

Specify an access list name

aspl-name

AS path access list name

aspl-name

Known as-path access-list name

seq

Sequence number of an entry

seq

Sequence number

timeout

(Optional) Timeout to be used for checking regex cpu hog

sec

(Optional) No. of seconds used as timeout

deny

Specify packets to reject

permit

Specify packets to forward

line

A

Command Mode

- /exec/configure

ip authentication

[no] { ip | ipv6 } authentication { { key-chain eigrp <eigrp-ptag> <chain> } | { mode eigrp <eigrp-ptag> md5 } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

authentication

Configures EIGRP authentication subcommands

key-chain

key-chain

eigrp-ptag

Process tag

chain

name of key-chain

mode

mode

eigrp

EIGRP interface configuration commands

md5

Keyed message digest

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip auto-discard

[no] ip auto-discard

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

auto-discard

Auto 0.0.0.0/0 discard route

Command Mode

- /exec/configure /exec/configure/vrf

ip bandwidth-percent eigrp

{ { { ip | ipv6 } bandwidth-percent eigrp <eigrp-ptag> <percent> } | { no { ip | ipv6 } bandwidth-percent eigrp <eigrp-ptag> [ <percent> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

bandwidth-percent

Configures IP-EIGRP bandwidth limit

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

percent

Maximum bandwidth percentage that EIGRP may use

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip bandwidth eigrp

{ { { ip | ipv6 } bandwidth eigrp <eigrp-ptag> <bw> } | { no { ip | ipv6 } bandwidth eigrp <eigrp-ptag> [ <bw> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

bandwidth

Set bandwidth for interface used in EIGRP metric calculation

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

bw

Bandwidth in kilobits

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip cache disable

[no] ip cache disable

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

cache

Disable cache

disable

Disable cache

Command Mode

- /exec/configure

ip community-list expanded deny

{ ip community-list expanded <name> [ timeout <sec> ] { deny | permit } <line> } | { no ip community-list expanded <name> [ timeout <sec> ] [ { deny | permit } <line> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

community-list

Add a community list entry

expanded

Add an expanded community list entry

name

Name of expanded community list

timeout

(Optional) Timeout to be used for checking regex cpu hog

sec

(Optional) No. of seconds used as timeout

deny

Specify community to reject

permit

Specify community to accept

line

Regular-expression(must

Command Mode

- /exec/configure

ip community-list expanded deny

{ ip community-list expanded <name> [ timeout <sec> ] { deny | permit } <line> } | { no ip community-list expanded <name> [ timeout <sec> ] [ { deny | permit } <line> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

community-list

Add a community list entry

expanded

Add an expanded community list entry

name

Name of expanded community list

timeout

(Optional) Timeout to be used for checking regex cpu hog

sec

(Optional) No. of seconds used as timeout

deny

Specify community to reject

permit

Specify community to accept

line

Regular-expression(must

Command Mode

- /exec/configure

ip community-list expanded seq deny

{ ip community-list expanded <name> seq <seq> [ timeout <sec> ] { deny | permit } <line> } | { no ip community-list expanded <name> seq <seq> [ timeout <sec> ] [ { deny | permit } <line> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

community-list

Add a community list entry

expanded

Add an expanded community list entry

name

Name of expanded community list

seq

Sequence number of an entry

seq

Sequence number

timeout

(Optional) Timeout to be used for checking regex cpu hog

sec

(Optional) No. of seconds used as timeout

deny

Specify community to reject

permit

Specify community to accept

line

Regular-expression(must

Command Mode

- /exec/configure

ip community-list standard permit internet local-AS

{ ip community-list standard <name> { permit | deny } { internet | local-AS | no-advertise | no-export | <aann> | <number> | <hex_num> } + } | { no ip community-list standard <name> [ permit | deny ] [ { internet | local-AS | no-advertise | no-export | <aann> | <number> | <hex_num> } + ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

community-list

Add a community list entry

standard

Add a standard Community list entry

name

Standard community list name

permit

Specify community to accept

deny

Specify community to reject

internet

Internet (well-known community)

local-AS

Do not send outside local AS (well-known community)

no-advertise

Do not advertise to any peer (well-known community)

no-export

Do not export to next AS (well-known community)

aann

Community number aa:nn format

number

Community number

hex_num

Community number in hex

internet

(Optional) local-AS

Command Mode

- /exec/configure

ip community-list standard permit internet local-AS

{ ip community-list standard <name> { permit | deny } { internet | local-AS | no-advertise | no-export | <aann> | <number> | <hex_num> } + } | { no ip community-list standard <name> [ permit | deny ] [ { internet | local-AS | no-advertise | no-export | <aann> | <number> | <hex_num> } + ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

community-list

Add a community list entry

standard

Add a standard Community list entry

name

Standard community list name

permit

Specify community to accept

deny

Specify community to reject

internet

Internet (well-known community)

local-AS

Do not send outside local AS (well-known community)

no-advertise

Do not advertise to any peer (well-known community)

no-export

Do not export to next AS (well-known community)

aann

Community number aa:nn format

number

Community number

hex_num

Community number in hex

internet

(Optional) local-AS

Command Mode

- /exec/configure

ip community-list standard seq permit internet local-AS

{ ip community-list standard <name> seq <seq> { permit | deny } { internet | local-AS | no-advertise | no-export | <aann> | <number> | <hex_num> } + } | { no ip community-list standard <name> seq <seq> [ permit | deny ] [ { internet | local-AS | no-advertise | no-export | <aann> | <number> | <hex_num> } + ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

community-list

Add a community list entry

standard

Add a standard Community list entry

name

Standard community list name

seq

Sequence number of an entry

seq

Sequence number

permit

Specify community to accept

deny

Specify community to reject

internet

Internet (well-known community)

local-AS

Do not send outside local AS (well-known community)

no-advertise

Do not advertise to any peer (well-known community)

no-export

Do not export to next AS (well-known community)

aann

Community number aa:nn format

number

Community number

hex_num

Community number in hex

internet

(Optional) local-AS

Command Mode

- /exec/configure

ip default-gateway

[no] ip default-gateway <ip-addr> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

default-gateway

Configure default gateway

ip-addr

IP prefix in format i.i.i.i

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure /exec/configure/config-mgmt /exec/configure/vrf /exec/configure/if-gre-tunnel

ip delay eigrp

{ { { ip | ipv6 } delay eigrp <eigrp-ptag> <delay> [ picoseconds ] } | { no { ip | ipv6 } delay eigrp <eigrp-ptag> [ <delay> ] [ picoseconds ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

delay

Set delay for interface used in EIGRP metric calculation

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

delay

Throughput delay

picoseconds

(Optional) Delay units in picoseconds

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip destination

{ ip { destination | source } <addr> } | { no ip { destination | source } }

Syntax Description

no

Negate a command or set its defaults

ip

specify flow ipv4 address

source

specify flow source ipv4 address

destination

specify flow destination ip address

addr

ipv4 address

Command Mode

- /exec/configure/configngoamprofileflow

ip dhcp packet strict-validation

[no] ip dhcp packet strict-validation

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

packet

DHCP packet

strict-validation

DHCP packet strict validation

Command Mode

- /exec/configure/

ip dhcp relay

[no] ip dhcp relay

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

Enable DHCP relay agent

Command Mode

- /exec/configure

ip dhcp relay address

[no] ip dhcp relay address [ <ip-addr-val> [ use-vrf <vrf-name> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

Configure relay agent

address

Configure DHCP server to refer to

ip-addr-val

(Optional) IP address

use-vrf

(Optional) helper address VRF membership

vrf-name

(Optional) VRF name

Command Mode

- /exec/configure/if-igp /exec/configure/ppm-ethernet-switch /exec/configure/ppm-port-channel-switch

ip dhcp relay information option

[no] ip dhcp relay information option

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

information

Relay agent information option

option

Insert relay information in BOOTREQUEST

Command Mode

- /exec/configure

ip dhcp relay information option trust

[no] ip dhcp relay information option trust

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

information

Relay agent information option

option

Relay agent option

trust

Enable relay trust functionality on the system

Command Mode

- /exec/configure

ip dhcp relay information option vpn

[no] ip dhcp relay information option vpn

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

information

Relay agent information option

option

Insert relay information in BOOTREQUEST

vpn

Enable relay support across VRFs

Command Mode

- /exec/configure

ip dhcp relay information trust-all

[no] ip dhcp relay information trust-all

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

information

Relay agent information option

trust-all

Enable relay trust on all the interfaces

Command Mode

- /exec/configure

ip dhcp relay information trusted

[no] ip dhcp relay information trusted

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

information

Relay agent information option

trusted

Enable relay trust on this interface

Command Mode

- /exec/configure/if-igp

ip dhcp relay source-address hsrp

[no] ip dhcp relay source-address hsrp

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

Configure DHCPv4 relay agent

source-address

Configure source address for DHCPv4 relay

hsrp

Use VIP address instead of SVI address

Command Mode

- /exec/configure /exec/configure/if-igp

ip dhcp relay source-interface

[no] ip dhcp relay source-interface

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

Configure relay agent

source-interface

Configure source interface for DHCP relay

Command Mode

- /exec/configure /exec/configure/if-igp

ip dhcp relay source-interface

ip dhcp relay source-interface <interface-name>

Syntax Description

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

Configure relay agent

source-interface

Configure source interface for DHCP relay

interface-name

Source interface

Command Mode

- /exec/configure /exec/configure/if-igp

ip dhcp relay sub-option circuit-id customized

[no] ip dhcp relay sub-option circuit-id customized

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

sub-option

Relay agent information option sub-option

circuit-id

sub-option of option82

customized

circuit id customized to include vlan id, slot and port info

Command Mode

- /exec/configure

ip dhcp relay sub-option circuit-id format-type string

[no] ip dhcp relay sub-option circuit-id format-type string [ format <format-string> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

sub-option

Relay agent suboption

circuit-id

Relay agent circuit-id suboption

format-type

Specify suboption format type

string

Use string format for suboption

format

(Optional) Specify format string

format-string

(Optional) Format string

Command Mode

- /exec/configure

ip dhcp relay sub-option type cisco

[no] ip dhcp relay sub-option type cisco

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

DHCP relay agent parameters

sub-option

Relay agent suboption

type

Relay agent suboption type

cisco

Use Cisco propritery suboptions

Command Mode

- /exec/configure

ip dhcp relay subnet-broadcast

[no] ip dhcp relay subnet-broadcast

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

relay

Configure DHCP relay

subnet-broadcast

Configure DHCP relay subnet-broadcast on interface

Command Mode

- /exec/configure/if-igp

ip dhcp smart-relay

[no] ip dhcp smart-relay

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

smart-relay

Configure DHCP smart relay on interface

Command Mode

- /exec/configure/if-igp

ip dhcp smart-relay global

[no] ip dhcp smart-relay global

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

smart-relay

Configure DHCP smart relay

global

Configure DHCP smart relay globally

Command Mode

- /exec/configure

ip dhcp snooping

[no] ip dhcp snooping

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

snooping

DHCP Snooping

Command Mode

- /exec/configure/

ip dhcp snooping information option

[no] ip dhcp snooping information option

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

snooping

DHCP Snooping

information

DHCP Snooping information

option

DHCP Snooping information option

Command Mode

- /exec/configure/

ip dhcp snooping ipsg-excluded vlan

[no] ip dhcp snooping ipsg-excluded vlan <vlan-id10>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

snooping

DHCP Snooping

ipsg-excluded

exclude ipsg

vlan

DHCP Snooping ipsg excluded vlan

vlan-id10

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

ip dhcp snooping trust

[no] ip dhcp snooping trust

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

snooping

DHCP Snooping

trust

DHCP Snooping trust config

Command Mode

- /exec/configure/if-switching

ip dhcp snooping verify mac-address

[no] ip dhcp snooping verify mac-address

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

snooping

DHCP Snooping

verify

DHCP snooping verify

mac-address

DHCP snooping verify mac-address

Command Mode

- /exec/configure/

ip dhcp snooping vlan

[no] ip dhcp snooping vlan <vlan-id10>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dhcp

Configure DHCP snooping or relay

snooping

DHCP Snooping

vlan

DHCP Snooping vlan

vlan-id10

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

ip directed-broadcast

[no] ip directed-broadcast [ <acl-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

directed-broadcast

IP directed-broadcast

acl-name

(Optional) ACL policy name

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config

ip distribute-list eigrp

[no] { ip | ipv6 } distribute-list eigrp <eigrp-ptag> { { route-map <map> } | { prefix-list <list> } } { in | out }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

distribute-list

Filter networks in routing updates

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

route-map

Use a route-map for route filtering

map

Route-map name

prefix-list

Use a prefix-list for route filtering

list

Reference to prefix-list name

in

Filter incoming routing updates

out

Filter outgoing routing updates

Command Mode

- /exec/configure/if-igp

ip dns source-interface

[no] ip dns source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

dns

Configure dns client

source-interface

Configure source interface feature for domain-lookup

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip domain-list

[no] ip domain-list { <s0> | <s1> [ use-vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

domain-list

Add additional domain names

s0

Enter a domain

s1

Enter a domain

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure /exec/configure/vrf

ip domain-lookup

[no] ip domain-lookup

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

domain-lookup

Enable/Disable DNS

Command Mode

- /exec/configure

ip domain-name

[no] ip domain-name { <s0> | <s1> [ use-vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

domain-name

Specify default domain name

s0

Enter the default domain

s1

Enter the default domain

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure /exec/configure/vrf

ip drop-glean

[no] ip drop-glean

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

drop-glean

Installs the secondary subnet routes as Drop routes

Command Mode

- /exec/configure/if-vlan-common

ip dscp-lop

[no] ip dscp-lop | ip dscp-lop { <dscp-val> | <dscp-enum> }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

dscp-lop

Set DSCP to be used for locally originated packets for IPv4 and IPv6. Cos will not be set.

dscp-val

Specify DSCP value for Locally Originated packets for IPv4 and IPv6

dscp-enum

Command Mode

- /exec/configure

ip dscp

[no] ip dscp <dscp_value>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Set ERSPAN IP options

dscp

Set the IP DSCP value

dscp_value

Command Mode

- /exec/configure/config-monitor-erspan-src

ip eigrp bfd

[no] ip eigrp <eigrp-tag> bfd [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

eigrp

EIGRP interface configuration commands

eigrp-tag

Process tag

bfd

Enable BFD on this interface

disable

(Optional) Disable BFD on this interface

Command Mode

- /exec/configure/if-igp

ip eigrp event-history bfd size

[no] { ip | ipv6 } eigrp [ <eigrp-ptag> ] event-history bfd size { <size_in_text> | <size_in_Kbytes> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Event History of EIGRP

bfd

Show bfd log of EIGRP

size

Configure the size of the event-hist buffer

size_in_text

Buffer size

size_in_Kbytes

Size of the file in kbytes

Command Mode

- /exec/configure

ip eigrp event-history errors

[no] { ip | ipv6 } eigrp [ <eigrp-ptag> ] event-history { errors | msgs }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Event History of EIGRP

errors

Show error log of EIGRP

msgs

Show message log of EIGRP

Command Mode

- /exec/configure

ip eigrp event-history size

[no] { ip | ipv6 } eigrp [ <eigrp-ptag> ] event-history { fsm | packet | rib } size { <size_in_text> | <size_in_Kbytes> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Clear IP commands

ipv6

Clear IPv6 commands

eigrp

EIGRP clear commands

eigrp-ptag

(Optional) Process tag

event-history

Event History of EIGRP

fsm

FSM log of EIGRP

packet

Packet log of EIGRP

rib

RIB log of EIGRP

size

Configure the size of the event-hist buffer

size_in_text

Buffer size

size_in_Kbytes

Size of the file in kbytes

Command Mode

- /exec/configure

ip eigrp shutdown

[no] { ip | ipv6 } eigrp <eigrp-ptag> shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

shutdown

Shutdown EIGRP on this interface

Command Mode

- /exec/configure/if-igp

ip extcommunity-list expanded deny

{ ip extcommunity-list expanded <name> { deny | permit } <line> } | { no ip extcommunity-list expanded <name> [ { deny | permit } <line> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

extcommunity-list

Add a extcommunity list entry

expanded

Add an expanded extcommunity list entry

name

Name of expanded extcommunity list

deny

Specify extcommunity to reject

permit

Specify extcommunity to accept

line

Regular-expression(must

Command Mode

- /exec/configure

ip extcommunity-list standard permit

{ ip extcommunity-list standard <name> { permit | deny } { { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } | { rt { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { soo { <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> } } } + | { no ip extcommunity-list standard <name> [ permit | deny ] [ { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } | { rt { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { soo { <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> } } ] + } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

extcommunity-list

Add a extcommunity list entry

standard

Add a standard Extcommunity list entry

name

Standard extcommunity list name

permit

Specify extcommunity to accept

deny

Specify extcommunity to reject

4byteas-generic

Generic extended community

transitive

Transitive extcommunity

non-transitive

Non-Transitive extcommunity

rt

Router-Target

soo

Site-Of-Origin

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

ext-comm-rt-aa2nn4

Extcommunity number

ext-comm-rt-aa4nn2

Extcommunity number

ext-comm-soo-aa2nn4

Extcommunity number

ext-comm-soo-aa4nn2

Extcommunity number

Command Mode

- /exec/configure

ip flow monitor input

[no] ip flow monitor <monitorname> input [ sampler <samplername> ]

Syntax Description

ip

Configure IP features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan-config

ip flow monitor input

[no] ip flow monitor <monitorname> { input | output } [ sampler <samplername> ]

Syntax Description

ip

Configure IP features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/if-routing /exec/configure/if-mgmt-ether /exec/configure/if-any-tunnel /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

ip flow monitor input

[no] ip flow monitor <monitorname> { input | output } [ sampler <samplername> ]

Syntax Description

ip

Configure IP features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan

ip flow monitor input

[no] ip flow monitor <monitorname> { input | output } [ sampler <samplername> ]

Syntax Description

ip

Configure IP features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/if-vlan-common

ip flow monitor output

ip flow monitor <monitorname> output [ sampler <samplername> ]

Syntax Description

ip

Configure IP features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan-config

ip flow monitor output

[no] ip flow monitor <monitorname> output [ sampler <samplername> ]

Syntax Description

ip

Configure IP features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan-config

ip forward

ip forward | no ip forward

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

forward

Enable ip forwarding on interface

Command Mode

- /exec/configure/if-vlan /exec/configure/if-vlan-range /exec/configure/if-igp

ip ftp source-interface

[no] ip ftp source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ftp

Configure FTP client

source-interface

Configure source interface feature for FTP client

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip hello-interval eigrp

{ { { ip | ipv6 } hello-interval eigrp <eigrp-ptag> <hello-interval> } | { no { ip | ipv6 } hello-interval eigrp <eigrp-ptag> [ <hello-interval> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

hello-interval

Configures IP-EIGRP hello interval

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

hello-interval

Seconds between hello transmissions

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip hold-time eigrp

{ { { ip | ipv6 } hold-time eigrp <eigrp-ptag> <holdtime> } | { no { ip | ipv6 } hold-time eigrp <eigrp-ptag> [ <holdtime> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

hold-time

Configures IP-EIGRP hold time

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

holdtime

Seconds before neighbor is considered down

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip host

[no] ip host <s0> <ipv4_0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

host

Add an entry to the ip hostname table

s0

Name of Host

ipv4_0

Enter an IP address

Command Mode

- /exec/configure

ip http source-interface

[no] ip http source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

http

Configure HTTP client

source-interface

Configure source interface feature for FTP client

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip icmp-errors source-interface

ip icmp-errors source-interface <interface> [ <icmp_type> ] | no ip icmp-errors source-interface [ <interface> <icmp_type> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

icmp-errors

ICMP unreachable/TTL-exceeded/param-prob messages

source-interface

Configure source-address for applications

interface

Interface to pick source-address from

icmp_type

(Optional) ICMPv6 types

Command Mode

- /exec/configure /exec/configure/vrf

ip igmp allow-v3-asm

[no] ip igmp allow-v3-asm

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

allow-v3-asm

Accept IGMPv3 reports for non SSM groups

Command Mode

- /exec/configure/if-igp

ip igmp any-query-destination

[no] ip igmp any-query-destination

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

any-query-destination

Allow any destination-IP for General Queries

Command Mode

- /exec/configure

ip igmp bootup-delay

{ { no ip igmp bootup-delay [ <delay> ] } | { ip igmp bootup-delay <delay> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

bootup-delay

Configures bootup route add delay to RIB

delay

(Optional) Delay downloading in seconds

Command Mode

- /exec/configure

ip igmp enforce-router-alert

[no] ip igmp enforce-router-alert

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

enforce-router-alert

Enforce Router Alert option check for IGMPv2 and IGMPv3 packets

Command Mode

- /exec/configure

ip igmp event-history cli

[no] ip igmp event-history cli { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

cli

CLI events for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp event-history ha

[no] ip igmp event-history ha { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

ha

HA events for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp event-history interface

[no] ip igmp event-history { interface-debugs | group-debugs } { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

interface-debugs

Interface-debugs for IGMP

group-debugs

Group-debugs for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp event-history interface

[no] ip igmp event-history { interface-events | group-events } { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

interface-events

Interface-events for IGMP

group-events

Group-events for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp event-history mtrace

[no] ip igmp event-history mtrace { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

mtrace

Mtrace events for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp event-history mvr

[no] ip igmp event-history mvr { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

mvr

MVR events for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp event-history policy

[no] ip igmp event-history policy { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

policy

Policy events for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp event-history vrf

[no] ip igmp event-history vrf { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

event-history

Configure event-history buffers

vrf

VRF events for IGMP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp file-debug

[no] ip igmp file-debug

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

file-debug

Collect all debugs to a file

Command Mode

- /exec/configure

ip igmp flush-routes

[no] ip igmp flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

flush-routes

Remove routes when restarting IGMP

Command Mode

- /exec/configure

ip igmp group-timeout

{ { no ip igmp group-timeout [ <time> ] } | { ip igmp group-timeout <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

group-timeout

Configures group membership timeout for IGMPv2

time

(Optional) Time in seconds

Command Mode

- /exec/configure/if-igp

ip igmp ha-stateful

[no] ip igmp ha-stateful

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

ha-stateful

Enable stateful IGMP HA

Command Mode

- /exec/configure

ip igmp immediate-leave

[no] ip igmp immediate-leave

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

immediate-leave

Enable/Disable immediate leave

Command Mode

- /exec/configure/if-igp

ip igmp join-group

[no] ip igmp join-group { { <group> [ source <source> ] } | { route-map <route-map-name> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

join-group

Configures local group membership for router

group

Multicast group IP address

source

(Optional) Configures source address for IGMPv3 (S,G) Channel

source

(Optional) Source IP address

route-map

Join group policy

route-map-name

Route-map name

Command Mode

- /exec/configure/if-igp

ip igmp last-member-query-count

{ { no ip igmp last-member-query-count [ <count> ] } | { ip igmp last-member-query-count <count> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

last-member-query-count

Configures number of group-specific Queries sent

count

(Optional) Count value

Command Mode

- /exec/configure/if-igp

ip igmp last-member-query-response-time

{ { no ip igmp last-member-query-response-time [ <interval> ] } | { ip igmp last-member-query-response-time <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

last-member-query-response-time

Configures last member query response time

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/if-igp

ip igmp querier

{ { no ip igmp { querier-timeout | query-timeout } [ <time> ] } | { ip igmp { querier-timeout | query-timeout } <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

querier-timeout

Configures querier timeout for IGMPv2

query-timeout

Configures querier timeout for IGMPv2

time

(Optional) Time in seconds

Command Mode

- /exec/configure/if-igp

ip igmp query-interval

{ { no ip igmp query-interval [ <interval> ] } | { ip igmp query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

query-interval

Configures interval between Query transmission

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/if-igp

ip igmp query-max-response-time

{ { no ip igmp query-max-response-time [ <time> ] } | { ip igmp query-max-response-time <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

query-max-response-time

Configures MRT for query messages

time

(Optional) Time in seconds

Command Mode

- /exec/configure/if-igp

ip igmp report-link-local-groups

[no] ip igmp report-link-local-groups

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

report-link-local-groups

Send Reports for groups in 224.0.0.0/24

Command Mode

- /exec/configure/if-igp

ip igmp report prefix-list

{ { ip igmp { report-policy | access-group } { <route-map-name> | prefix-list <prefix-list-name> } } | { no ip igmp { report-policy | access-group } [ <route-map-name> | prefix-list <prefix-list-name> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

report-policy

IGMP Report Policy

access-group

IGMP access-group

route-map-name

Route-map name

prefix-list

Prefix list policy

prefix-list-name

Name of prefix-list

Command Mode

- /exec/configure/if-igp

ip igmp robustness-variable

{ { no ip igmp robustness-variable [ <value> ] } | { ip igmp robustness-variable <value> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

robustness-variable

Configures RFC defined Robustness Variable

value

(Optional) Count value

Command Mode

- /exec/configure/if-igp

ip igmp snooping

[no] ip igmp snooping { holddown-timer <timer> | cc-mode | m2rib-max-omfs <omf-count> | m2rib-max-omf-routes <omf-route-count> | m2rib-max-routes <route-count> | m2rib-max-buffers <buf-count> }

Syntax Description

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

no

(Optional) Negate a command or set its defaults

holddown-timer

Intitial holddown period after switchover/restart

cc-mode

Enter MFDM congestion-control mode

m2rib-max-omfs

Number of OMF entries in M2RIB buffer

m2rib-max-routes

Number of route entries in M2RIB buffer

m2rib-max-omf-routes

Number of omf route entries in M2RIB buffer

m2rib-max-buffers

Number of update buffers with M2RIB

timer

Delay (in secs)

omf-count

route-count

buf-count

omf-route-count

Command Mode

- /exec/configure

ip igmp snooping

{ { no ip igmp snooping } | { ip igmp snooping } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping

{ { no ip igmp snooping } | { ip igmp snooping } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

Command Mode

- /exec/configure/vlan

ip igmp snooping

{ { no ip igmp snooping } | { ip igmp snooping } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

Command Mode

- /exec/configure

ip igmp snooping access-group

[no] ip igmp snooping access-group <route-map-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

access-group

Configures filter policy for groups mentioned in route-map

route-map-name

route-map name

Command Mode

- /exec/configure/vlan-config

ip igmp snooping disable-nve-static-router-port

[no] ip igmp snooping disable-nve-static-router-port

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

disable-nve-static-router-port

Disable NVE as a static router port

Command Mode

- /exec/configure

ip igmp snooping disable-nve-static-router-port

[no] ip igmp snooping disable-nve-static-router-port

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

disable-nve-static-router-port

Disable NVE as a static router port

Command Mode

- /exec/configure

ip igmp snooping drop-invalid-reports

[no] ip igmp snooping drop-invalid-reports

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

drop-invalid-reports

drop invalid reports

Command Mode

- /exec/configure

ip igmp snooping event-history igmp-snoop-internal

[no] ip igmp snooping event-history igmp-snoop-internal { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

event-history

Configure event-history buffers

igmp-snoop-internal

Internal events for IGMP-snoop

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp snooping event-history mfdm-sum

[no] ip igmp snooping event-history mfdm-sum { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

event-history

Configure event-history buffers

mfdm-sum

MFDM-SUM events for IGMP-snoop

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp snooping event-history mfdm

[no] ip igmp snooping event-history mfdm { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

event-history

Configure event-history buffers

mfdm

MFDM events for IGMP-snoop

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp snooping event-history rib

[no] ip igmp snooping event-history rib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

event-history

Configure event-history buffers

rib

RIB events for IGMP-snoop

size

Configure siaze

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp snooping event-history vlan-events

[no] ip igmp snooping event-history vlan-events { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

event-history

Configure event-history buffers

vlan-events

VLAN/BD events for IGMP-snoop

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp snooping event-history vlan

[no] ip igmp snooping event-history vlan { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

event-history

Configure event-history buffers

vlan

VLAN/BD events for IGMP-snoop

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp snooping event-history vpc

[no] ip igmp snooping event-history vpc { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

event-history

Configure event-history buffers

vpc

VPC events for IGMP-snoop

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip igmp snooping explicit-tracking

{ { no ip igmp snooping explicit-tracking } | { ip igmp snooping explicit-tracking } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

explicit-tracking

Configures Explicit Host tracking for VLAN/BD

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping explicit-tracking

{ { no ip igmp snooping explicit-tracking } | { ip igmp snooping explicit-tracking } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

explicit-tracking

Configures Explicit Host tracking for VLAN/BD

Command Mode

- /exec/configure/vlan

ip igmp snooping fast-leave

{ { no ip igmp snooping fast-leave } | { ip igmp snooping fast-leave } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

fast-leave

Configures Fast leave for the VLAN/BD

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping fast-leave

{ { no ip igmp snooping fast-leave } | { ip igmp snooping fast-leave } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

fast-leave

Configures Fast leave for the VLAN/BD

Command Mode

- /exec/configure/vlan

ip igmp snooping group-timeout

[no] ip igmp snooping group-timeout { <timeout> | never }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

group-timeout

Configures group membership timeout in all VLAN/BDs

timeout

Timeout in minutes

never

Never expire ports from group membership

Command Mode

- /exec/configure

ip igmp snooping group-timeout

[no] ip igmp snooping group-timeout { <timeout> | never }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

group-timeout

Configures group membership timeout in VLAN/BD

timeout

Timeout in minutes

never

Never expire ports from group membership

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping last-member-query-count

{ { no ip igmp snooping last-member-query-count [ <count> ] } | { ip igmp snooping last-member-query-count <count> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

last-member-query-count

Configures number of group-specific queries sent

count

(Optional) Count value

Command Mode

- /exec/configure/vlan

ip igmp snooping last-member-query-count

{ { no ip igmp snooping last-member-query-count [ <count> ] } | { ip igmp snooping last-member-query-count <count> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

last-member-query-count

Configures number of group-specific queries sent

count

(Optional) Count value

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping last-member-query-interval

{ { no ip igmp snooping last-member-query-interval [ <interval> ] } | { ip igmp snooping last-member-query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

last-member-query-interval

Configures interval between group-specific Query transmissions

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/vlan

ip igmp snooping last-member-query-interval

{ { no ip igmp snooping last-member-query-interval [ <interval> ] } | { ip igmp snooping last-member-query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

last-member-query-interval

Configures interval between group-specific Query transmissions

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping limit

[no] ip igmp snooping limit [ <max-grps> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

limit

Limits number of groups that could be joined per interface to <max-grps>

max-grps

(Optional) Maximum Groups per interface

Command Mode

- /exec/configure/vlan-config

ip igmp snooping link-local-groups-suppression

[no] ip igmp snooping link-local-groups-suppression

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

link-local-groups-suppression

Configures VLAN/BD link-local groups suppression

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping link-local-groups-suppression

[no] ip igmp snooping link-local-groups-suppression

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

link-local-groups-suppression

Configures VLAN/BD link-local groups suppression

Command Mode

- /exec/configure/vlan

ip igmp snooping link-local-groups-suppression

[no] ip igmp snooping link-local-groups-suppression

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

link-local-groups-suppression

Configures Global link-local groups suppression

Command Mode

- /exec/configure

ip igmp snooping many-to-one-enhance

[no] ip igmp snooping many-to-one-enhance

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

many-to-one-enhance

Enable many to one optimization for n3500 platform

Command Mode

- /exec/configure

ip igmp snooping max-gq-miss

{ { no ip igmp snooping max-gq-miss } | { ip igmp snooping max-gq-miss <count> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

max-gq-miss

Configure general query miss count

count

Max number of GQ misses allowed

Command Mode

- /exec/configure

ip igmp snooping minimum-verison

{ { no ip igmp snooping minimum-verison [ <min-ver> ] } | { ip igmp snooping minimum-verison <min-ver> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

minimum-verison

Doesn't process IGMP packets of versions below <min-ver>

min-ver

(Optional) Minimum IGMP version

Command Mode

- /exec/configure/vlan-config

ip igmp snooping mrouter interface

{ { no ip igmp snooping mrouter interface <interface> } | { ip igmp snooping mrouter interface <interface> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

mrouter

Configures static multicast router interface

interface

Specify interface for static-mrouter

interface

Interface name

Command Mode

- /exec/configure/vlan

ip igmp snooping mrouter interface

{ [ no ] ip igmp snooping mrouter interface [ vsi ] <interface> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

mrouter

Configures static multicast router interface

interface

Specify interface for static-mrouter

vsi

(Optional) Specify if this interface is a VSI

interface

Interface name

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping mrouter vpc-peer-link

[no] ip igmp snooping mrouter vpc-peer-link

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

mrouter

Configures static multicast router interface

vpc-peer-link

Specify vpc-peer-link as static mrouter for all VLAN/BDs

Command Mode

- /exec/configure

ip igmp snooping optimise-multicast-flood

[no] ip igmp snooping optimise-multicast-flood

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

optimise-multicast-flood

Configures Optimized Multicast Flood (OMF) on all VLAN/BDs

Command Mode

- /exec/configure

ip igmp snooping optimise-multicast-flood

[no] ip igmp snooping optimise-multicast-flood

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

optimise-multicast-flood

Configures Optimised Multicast Flood (OMF) on the VLAN/BD

Command Mode

- /exec/configure/vlan

ip igmp snooping optimised-multicast-flood

[no] ip igmp snooping optimised-multicast-flood

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

optimised-multicast-flood

Configures Optimised Multicast Flood (OMF) on the VLAN/BD

Command Mode

- /exec/configure/vlan

ip igmp snooping optimised

[no] ip igmp snooping { optimised-multicast-flood | optimise-multicast-flood }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

optimised-multicast-flood

Configures Optimised Multicast Flood (OMF) on the VLAN

optimise-multicast-flood

Configures Optimised Multicast Flood (OMF) on the VLAN

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping proxy-leave use-group-address

{ { ip igmp snooping proxy-leave use-group-address } | { no ip igmp snooping proxy-leave use-group-address } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

proxy-leave

Proxy Leave

use-group-address

Use group address for proxy leave

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping proxy general-queries

[no] ip igmp snooping proxy general-queries [ mrt <mrt> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

proxy

Configures IGMP snooping proxy

general-queries

Configures proxy for general-queries

mrt

(Optional) Configure max-response-time for the switch's proxy general-queries

mrt

(Optional) MRT in seconds

Command Mode

- /exec/configure

ip igmp snooping proxy general-queries

[no] ip igmp snooping proxy general-queries [ mrt <mrt> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

proxy

Configures IGMP snooping proxy

general-queries

Configures proxy for general-queries

mrt

(Optional) Configure max-response-time for the switch's proxy general-queries

mrt

(Optional) MRT in seconds

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping querier-timeout

{ { no ip igmp snooping querier-timeout [ <time> ] } | { ip igmp snooping querier-timeout <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

querier-timeout

Configures querier timeout for IGMPv2

time

(Optional) Time in seconds

Command Mode

- /exec/configure/vlan

ip igmp snooping querier-timeout

{ { no ip igmp snooping querier-timeout [ <time> ] } | { ip igmp snooping querier-timeout <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

querier-timeout

Configures querier timeout for IGMPv2

time

(Optional) Time in seconds

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping querier

{ { no ip igmp snooping querier [ <querier> ] } | { ip igmp snooping querier <querier> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

querier

Enables snooping querier

querier

(Optional) Querier IP address

Command Mode

- /exec/configure/vlan

ip igmp snooping querier

{ { no ip igmp snooping querier [ <querier> ] } | { ip igmp snooping querier <querier> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

querier

Enables snooping querier

querier

(Optional) Querier IP address

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping query-interval

{ { no ip igmp snooping query-interval [ <interval> ] } | { ip igmp snooping query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

query-interval

Configures interval between query transmission

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/vlan

ip igmp snooping query-interval

{ { no ip igmp snooping query-interval [ <interval> ] } | { ip igmp snooping query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

query-interval

Configures interval between query transmission

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping query-max-response-time

{ { no ip igmp snooping query-max-response-time [ <time> ] } | { ip igmp snooping query-max-response-time <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

query-max-response-time

Configures MRT for query messages

time

(Optional) Time in seconds

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping query-max-response-time

{ { no ip igmp snooping query-max-response-time [ <time> ] } | { ip igmp snooping query-max-response-time <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

query-max-response-time

Configures MRT for query messages

time

(Optional) Time in seconds

Command Mode

- /exec/configure/vlan

ip igmp snooping report-flood all

{ { ip igmp snooping report-flood { all | interface <interface> } } | { no ip igmp snooping report-flood { all | interface <interface> } } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

report-flood

Configures Report flooding on a VLAN

interface

Specify interface for report flooding

all

Flood on ALL active ports of VLAN

interface

Interface name

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping report-suppression

{ { no ip igmp snooping report-suppression } | { ip igmp snooping report-suppression } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

report-suppression

Configures Global IGMPv1/IGMPv2 Report Suppression

Command Mode

- /exec/configure

ip igmp snooping report-suppression

{ { no ip igmp snooping report-suppression } | { ip igmp snooping report-suppression } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

report-suppression

Configures IGMPv1/IGMPv2 Report Suppression for the VLAN/BD

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping report-suppression

{ { no ip igmp snooping report-suppression } | { ip igmp snooping report-suppression } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

report-suppression

Configures IGMPv1/IGMPv2 Report Suppression for the VLAN/BD

Command Mode

- /exec/configure/vlan

ip igmp snooping report prefix interface

{ [ no ] ip igmp snooping { report-policy | access-group } { prefix-list | route-map } <pname> interface <interface> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

report-policy

IGMP Report Policy

access-group

IGMP access-group

prefix-list

IPv4 Prefix-List Policy

route-map

Route-Map Policy

pname

Policy Name Name

interface

Specify interface for filtering

interface

Interface name

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping robustness-variable

{ { no ip igmp snooping robustness-variable [ <value> ] } | { ip igmp snooping robustness-variable <value> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

robustness-variable

Configures RFC defined Robustness Variable

value

(Optional) Count value

Command Mode

- /exec/configure/vlan

ip igmp snooping robustness-variable

{ { no ip igmp snooping robustness-variable [ <value> ] } | { ip igmp snooping robustness-variable <value> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

robustness-variable

Configures RFC defined Robustness Variable

value

(Optional) Count value

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping self-mac-check

[no] ip igmp snooping self-mac-check

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

self-mac-check

enable loopback packet check and drop it

snooping

Configures IGMP Snooping

Command Mode

- /exec/configure

ip igmp snooping startup-query-count

{ { no ip igmp snooping startup-query-count [ <count> ] } | { ip igmp snooping startup-query-count <count> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

startup-query-count

Configures number of queries sent at startup

count

(Optional) Count value

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping startup-query-count

{ { no ip igmp snooping startup-query-count [ <count> ] } | { ip igmp snooping startup-query-count <count> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

startup-query-count

Configures number of queries sent at startup

count

(Optional) Count value

Command Mode

- /exec/configure/vlan

ip igmp snooping startup-query-interval

{ { no ip igmp snooping startup-query-interval [ <interval> ] } | { ip igmp snooping startup-query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

startup-query-interval

Configures query interval at startup

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/vlan

ip igmp snooping startup-query-interval

{ { no ip igmp snooping startup-query-interval [ <interval> ] } | { ip igmp snooping startup-query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

startup-query-interval

Configures query interval at startup

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping static-group interface

{ { no ip igmp snooping static-group <group> [ source <source> ] interface <interface> } | { ip igmp snooping static-group <group> [ source <source> ] interface <interface> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

static-group

Configures static group membership

group

Group IP Address

source

(Optional) Configures static (S,G) channel

source

(Optional) Source IP Address

interface

Specify interface for static-group

interface

Interface name

Command Mode

- /exec/configure/vlan

ip igmp snooping static-group interface

{ [ no ] ip igmp snooping static-group <group> [ source <source> ] interface [ vsi ] <interface> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

static-group

Configures static group membership

group

Group IP Address

source

(Optional) Configures static (S,G) channel

source

(Optional) Source IP Address

interface

Specify interface for static-group

vsi

(Optional) Specify if this interface is a VSI

interface

Interface name

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping syslog-threshold

{ ip igmp snooping syslog-threshold <percentage> } | { no ip igmp snooping syslog-threshold }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

syslog-threshold

IGMP SNOOPING table syslog threshold

percentage

Percentage

Command Mode

- /exec/configure

ip igmp snooping v3-report-suppression

{ { no ip igmp snooping v3-report-suppression } | { ip igmp snooping v3-report-suppression } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

v3-report-suppression

Configures IGMPv3 Report Suppression and Proxy Reporting for the VLAN/BD

Command Mode

- /exec/configure/vlan

ip igmp snooping v3-report-suppression

{ { no ip igmp snooping v3-report-suppression } | { ip igmp snooping v3-report-suppression } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

v3-report-suppression

Configures IGMPv3 Report Suppression and Proxy Reporting for the VLAN/BD

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping v3-report-suppression

{ { no ip igmp snooping v3-report-suppression } | { ip igmp snooping v3-report-suppression } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

v3-report-suppression

Configures Global IGMPv3 Report Suppression and Proxy Reporting

Command Mode

- /exec/configure

ip igmp snooping version

{ { no ip igmp snooping version [ <version> ] } | { ip igmp snooping version <version> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

version

Configures IGMP version number for VLAN/BD

version

(Optional) Version number value

Command Mode

- /exec/configure/vlan

ip igmp snooping version

{ { no ip igmp snooping version [ <version> ] } | { ip igmp snooping version <version> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP configuration commands

snooping

Configures IGMP Snooping

version

Configures IGMP version number for VLAN/BD

version

(Optional) Version number value

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

ip igmp snooping vpc

ip igmp snooping vpc { clear-cfs-flag | clear-pending-flag | clear-native-flag }

Syntax Description

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

vpc

vPC related command

clear-cfs-flag

clear cfs learnt flag from the routes / oifs

clear-native-flag

clear native learnt flag from the routes / oifs

clear-pending-flag

clear pending flag if set

Command Mode

- /exec/configure

ip igmp snooping vpc

ip igmp snooping vpc [ vpc-incremental | vpc-sync-only ]

Syntax Description

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

vpc

vPC related events

vpc-sync-only

(Optional) default - no vpc-incremental with route proxy disabled

vpc-incremental

(Optional) vpc-incremental mode with route proxy enabled

Command Mode

- /exec/configure

ip igmp snooping vpc peer-link-exclude

[no] ip igmp snooping vpc peer-link-exclude

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

vpc

Configures vPC

peer-link-exclude

Exclude vPC Peer-link for Routed multicast traffic

Command Mode

- /exec/configure

ip igmp snooping vpc peer-routes-download

ip igmp snooping vpc peer-routes-download [ stale ]

Syntax Description

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

vpc

vPC related command

peer-routes-download

get peer-learnt routes

stale

(Optional) stale the cfs learnt entry, i.e. clear cfs_flag

Command Mode

- /exec/configure

ip igmp snooping vxlan-umc drop

[no] ip igmp snooping vxlan-umc drop [ vlan <vlans-range> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

vxlan-umc

Turn off flooding on VLANs

drop

Drop unknown multicast traffic on all VLANs

vlan

(Optional) VLAN list to drop the unknown multicast traffic

vlans-range

(Optional) VLAN IDs for which unknown multicast traffic is dropped

Command Mode

- /exec/configure

ip igmp snooping vxlan

{ { no ip igmp snooping vxlan } | { ip igmp snooping vxlan } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

snooping

Configures IGMP Snooping

vxlan

Configures Snooping for vxlan vlans

Command Mode

- /exec/configure

ip igmp spoof-check

[no] ip igmp spoof-check

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

spoof-check

Enable spoof check for IGMP

Command Mode

- /exec/configure

ip igmp ssm-translate

[no] ip igmp ssm-translate <group> <source>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP global configuration commands

ssm-translate

Translate IGMPv1/v2 reports to (S,G) route entries

group

IP Multicast group range

source

IP Multicast address source

Command Mode

- /exec/configure /exec/configure/vrf

ip igmp startup-query-count

{ { no ip igmp startup-query-count [ <count> ] } | { ip igmp startup-query-count <count> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

startup-query-count

Configures number of queries sent at startup

count

(Optional) Count value

Command Mode

- /exec/configure/if-igp

ip igmp startup-query-interval

{ { no ip igmp startup-query-interval [ <interval> ] } | { ip igmp startup-query-interval <interval> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

startup-query-interval

Configures query interval at startup

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/if-igp

ip igmp state-limit

{ { ip igmp state-limit <max-states> [ reserved <route-map-name> <max-reserved> ] } | { no ip igmp state-limit [ <max-states> [ reserved <route-map-name> <max-reserved> ] ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

state-limit

Configures State limit

max-states

Maximum states allowed

reserved

(Optional) Reserve the states using route-map

route-map-name

(Optional) Route-map name

max-reserved

(Optional) Maximum (*,G)/(S,G) entires allowed on the interface

Command Mode

- /exec/configure/if-igp

ip igmp static

[no] ip igmp { static-group | static-oif } { { <group> [ source <source> ] } | { route-map <route-map-name> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

static-group

Configures static oif for a multicast forwarding entry

static-oif

Configures static oif for a multicast forwarding entry

group

Multicast group IP address

source

(Optional) Configures source address for IGMPv3 (S,G) Channel

source

(Optional) Source IP address

route-map

Static group policy

route-map-name

Route-map name

Command Mode

- /exec/configure/if-igp

ip igmp suppress v3-gsq

[no] ip igmp suppress v3-gsq

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

suppress

Suppress

v3-gsq

v3 GSQ

Command Mode

- /exec/configure/if-igp

ip igmp syslog-threshold

{ ip igmp syslog-threshold <percentage> } | { no ip igmp syslog-threshold }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP related events

syslog-threshold

IGMP table syslog threshold

percentage

Percentage

Command Mode

- /exec/configure

ip igmp version

{ { no ip igmp version [ <version> ] } | { ip igmp version <version> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

igmp

IGMP interface configuration commands

version

Configures IGMP version number for interface

version

(Optional) Version number value

Command Mode

- /exec/configure/if-igp

ip lisp alt-vrf

{ { [ no ] ip lisp alt-vrf { <vrf-name> | <vrf-known-name> } } | { [ no ] ipv6 lisp alt-vrf { <vrf-name> | <vrf-known-name> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

alt-vrf

Activate LISP-ALT functionality in VRF

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp database-mapping dynamic priority weight

{ [ no ] ip lisp database-mapping <eid-prefix> { <locator> | <locator6> | { dynamic <interface> } } priority <priority> weight <weight> } | { no ip lisp database-mapping <eid-prefix> { <locator> | <locator6> | { dynamic <interface> } } } | { [ no ] ipv6 lisp database-mapping <eid-prefix6> { <locator> | <locator6> | { dynamic <interface> } } priority <priority> weight <weight> } | { no ipv6 lisp database-mapping <eid-prefix6> { <locator> | <locator6> | { dynamic <interface> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

database-mapping

Configures Locator addresses for an ETR

eid-prefix

IP EID-prefix to advertise locators for

locator

IP address of loopback or other ETR loopback interface

dynamic

Get locator dynamically

interface

Interface to learn dynamic locator

priority

Configures which Locators from a set are preferred

priority

Lower priority Locator takes preference

weight

Traffic load-spreading among Locators

weight

Specified in a percentage from 0 to 100

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp disable-spoof-alert

[no] { ip | ipv6 } lisp disable-spoof-alert

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

disable-spoof-alert

Disable spoof-alert checking for Map-Replies

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp etr

[no] { ip | ipv6 } lisp etr

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

etr

Configures LISP Egress Tunnel Router (ETR) parameters

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp etr accept-map-request-mapping

{ { [ no ] ip lisp etr accept-map-request-mapping [ verify ] } | { [ no ] ipv6 lisp etr accept-map-request-mapping [ verify ] } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

etr

Configures LISP Egress Tunnel Router (ETR) parameters

lisp

LISP global configuration commands

accept-map-request-mapping

Configures an ETR to cache mappings received from Map-Request messages

verify

(Optional) Send Map-Request back to Map-Request originator of a Mapping Data Record

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp etr glean-mapping

{ { [ no ] ip lisp etr glean-mapping [ verify ] } | { [ no ] ipv6 lisp etr glean-mapping } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

etr

Configures LISP Egress Tunnel Router (ETR) parameters

lisp

LISP global configuration commands

glean-mapping

Glean locator mapping from outer DA for inner DA EID

verify

(Optional) Send Map-Request to ITR to verify data gleaning

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp etr map-cache-ttl

{ [ no ] ip lisp etr map-cache-ttl <minutes> } | { no ip lisp etr map-cache-ttl } | { [ no ] ipv6 lisp etr map-cache-ttl <minutes> } | { no ipv6 lisp etr map-cache-ttl }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

etr

Configures LISP Egress Tunnel Router (ETR) parameters

lisp

LISP global configuration commands

map-cache-ttl

Configures TTL for Map-Reply messages

minutes

Time-to-Live in units of minutes

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp etr map-register-ttl

{ [ no ] ip lisp etr map-register-ttl <minutes> } | { no ip lisp etr map-register-ttl } | { [ no ] ipv6 lisp etr map-register-ttl <minutes> } | { no ipv6 lisp etr map-register-ttl }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

etr

Configures LISP Egress Tunnel Router (ETR) parameters

lisp

LISP global configuration commands

map-register-ttl

Configures TTL for Map-Register messages

minutes

Time-to-Live in units of minutes

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp etr map-server key

{ { [ no ] ip lisp etr map-server { <ms> | <ms6> } [ key-type { sha1 | sha2 } ] key <key> } | { [ no ] ipv6 lisp etr map-server { <ms> | <ms6> } [ key-type { sha1 | sha2 } ] key <key> } | { [ no ] ip lisp etr map-server { <ms> | <ms6> } proxy-reply } | { [ no ] ipv6 lisp etr map-server { <ms> | <ms6> } proxy-reply } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

etr

Configures LISP Egress Tunnel Router (ETR) parameters

map-server

To interact with Map-Server

ms

Address of IPv4 map-server

key-type

(Optional) Authentication key type, either sha1 or sha2

sha1

(Optional) Use sha1 authenication in Map-Register messages

sha2

(Optional) Use sha2 authenication in Map-Register messages

key

Authentication key used with Map-Server

key

SHA-1 password key

proxy-reply

Request Map-Server to send Map-Replies on behalf of site

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp hardware-forwarding

[no] { ip | ipv6 } lisp hardware-forwarding

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

hardware-forwarding

Enable/disable Nexus 7K hardware forwarding

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp itr-etr

[no] { ip | ipv6 } lisp itr-etr

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

itr-etr

Configures both LISP ITR and ETR functionality

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp itr

[no] { ip | ipv6 } lisp itr

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

itr

Configures LISP Ingress Tunnel Router (ITR) parameters

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp itr drop-on-cache-miss

{ { [ no ] ip lisp itr drop-on-cache-miss } | { [ no ] ipv6 lisp itr drop-on-cache-miss } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

itr

Configures LISP Ingress Tunnel Router (ITR) parameters

drop-on-cache-miss

Drop packet when EID not found in cache

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp itr forward-on-cache-miss

{ { [ no ] ip lisp itr forward-on-cache-miss } | { [ no ] ipv6 lisp itr forward-on-cache-miss } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

itr

Configures LISP Ingress Tunnel Router (ITR) parameters

forward-on-cache-miss

Do not LISP encapsulate packet when EID not found in cache

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp itr map-resolver

{ [ no ] { ip | ipv6 } lisp itr map-resolver { <mr> | <mr6> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

itr

Configures LISP Ingress Tunnel Router (ITR) parameters

map-resolver

To interact with Map-Resolver

mr

Address of IPv4 map-server

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp itr send-data-probe

{ { [ no ] ip lisp itr send-data-probe } | { [ no ] ipv6 lisp itr send-data-probe } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

itr

Configures LISP Ingress Tunnel Router (ITR) parameters

send-data-probe

Send a Data-Probe instead of Map-Request on the LISP-ALT topology

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp locator-down

{ { [ no ] ip lisp locator-down <eid-prefix> { <locator> | <locator6> } } | { [ no ] ipv6 lisp locator-down <eid-prefix6> { <locator> | <locator6> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

locator-down

Manually set locator status to unreachable

eid-prefix

IP EID-prefix to find locator to set down

locator

IP address of already configured locator

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp locator-vrf

{ { [ no ] ip lisp locator-vrf { <vrf-name> | <vrf-known-name> } } | { [ no ] ipv6 lisp locator-vrf { <vrf-name> | <vrf-known-name> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

locator-vrf

Configure what VRF to use for locator command references

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp locator reachability exclude

[no] { ip | ipv6 } lisp locator reachability { exclude-default | minimum-mask-length <minmask> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ip

Configure IP features

ipv6

Configure IPv6 features

locator

Configure locator parameters

reachability

Configure reachability parameters

exclude-default

Exclude default route to reach remote locators

minimum-mask-length

Exclude routes coarser than the given mask length

minmask

Minimum mask length for the routes to locators

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp map-cache-limit

[no] { ip | ipv6 } lisp map-cache-limit <limit> [ reserve-list <prefix-list> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

map-cache-limit

Configures maximum size of map-cache

limit

Maximum number of map-cache entries

reserve-list

(Optional) EID-prefixes guaranteed to be stored in map-cache

prefix-list

(Optional) Reference to prefix-list name

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp map-cache drop native-forward map-request priority weight

{ { [ no ] ip lisp map-cache <eid-prefix> { drop | native-forward | map-request | { { <locator> | <locator6> } priority <priority> weight <weight> [ down ] } } } | { [ no ] ipv6 lisp map-cache <eid-prefix6> { drop | native-forward | map-request | { { <locator6> | <locator> } priority <priority> weight <weight> [ down ] } } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

map-cache

Configures static EID-to-RLOC mappings for an ITR

eid-prefix

IP EID-prefix for RLOC static mapping

locator

IP address of loopback or other ETR loopback interface

priority

Configures which Locators from a set are preferred

priority

Lower priority Locator takes preference

weight

Traffic load-spreading among Locators

weight

Specified in a percentage from 0 to 100

down

(Optional) Set state to down for RLOC

drop

Drop packets that match this map-cache entry

native-forward

Natively forward packets that match his map-cache entry

map-request

Send Map-Request for LISP destination EID

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp map-request-source

{ [ no ] ip lisp map-request-source <source> } | { no ip lisp map-request-source } | { [ no ] ipv6 lisp map-request-source <source6> } | { no ipv6 lisp map-request-source }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

map-request-source

Configures source address for Map-Request message

source

Source address for IPv4 Map-Request message

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp map-resolver

{ [ no ] { ip | ipv6 } lisp map-resolver }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

map-resolver

Configures LISP Map Resolver functionality

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp map-server

{ [ no ] { ip | ipv6 } lisp map-server }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

map-server

Configures LISP Map Server functionality

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp map-server try-map-cache

{ [ no ] { ip | ipv6 } lisp map-server try-map-cache }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

map-server

Configures LISP Map Server functionality

try-map-cache

Forward Map-Request to RLOCs from map-cache when site configuration does not exist

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp multicast

[no] ip lisp multicast

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

lisp

LISP global configuration commands

multicast

Configures LISP to carry multicast traffic, when ITR or ETR function is enabled

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp nat-traversal

[no] { ip | ipv6 } lisp nat-traversal

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP interface configuration commands

nat-traversal

Send Echo messages to Map-Server to get global locator

Command Mode

- /exec/configure/if-igp

ip lisp ntr

[no] ip lisp ntr <locator>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

lisp

LISP global configuration commands

ntr

Configures LISP NAT Tunnel Router (NTR)

locator

Local IP address in locator namespace

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp null0-is-alt-miss

[no] { ip | ipv6 } lisp null0-is-alt-miss

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

null0-is-alt-miss

Consider a ALT route with null0 next-hop as a lookup miss

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp proxy-etr

{ { [ no ] ip lisp proxy-etr } | { [ no ] ipv6 lisp proxy-etr } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

proxy-etr

Configures a Proxy ETR (PETR)

lisp

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp proxy-itr

{ { [ no ] ip lisp proxy-itr { <local-rloc> | <local-rloc6> } + } | { [ no ] ipv6 lisp proxy-itr { <local-rloc> | <local-rloc6> } + } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

proxy-itr

Configures a Proxy ITR (PTR)

local-rloc

Local IP address in locator namespace

lisp

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp short-map-cache-ttl

{ [ no ] { ip | ipv6 } lisp short-map-cache-ttl }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

short-map-cache-ttl

Sets both positive and negative TTL in Map-Reply to 1 minute

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp shortest-eid-prefix-length

{ { [ no ] ip lisp shortest-eid-prefix-length <pl> } | { [ no ] ipv6 lisp shortest-eid-prefix-length <pl6> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

shortest-eid-prefix-length

Do not accept EID-prefixes shorter than configured value

pl

IPv4 EID-prefix length

pl6

IPv6 EID-prefix length

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp source-locator

{ [ no ] { ip | ipv6 } lisp source-locator <interface> [ secondary ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP interface configuration commands

source-locator

Select source locator when destination locator uses this interface

interface

Use primary address from interface as source locator

secondary

(Optional) Use secondary address on interface as source locator

Command Mode

- /exec/configure/if-igp

ip lisp translate inside outside

{ { [ no ] ip lisp translate inside <nrEID> outside <rEID> } | { [ no ] ipv6 lisp translate inside <nrEID6> outside <rEID6> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

translate

Translate source address on ITR or destination address on ETR

inside

Site-based non-routable EID

nrEID

IPv4 inside address

outside

External-based routable EID

rEID

IPv4 outside address

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp use-bgp-locators

[no] { ip | ipv6 } lisp use-bgp-locators [ route-map <rmap-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

use-bgp-locators

Use next-hops from BGP as locators for map-cache entries

route-map

(Optional) Route-map applied to on-demand routes.

rmap-name

(Optional) Route-map name

Command Mode

- /exec/configure /exec/configure/vrf

ip lisp use-petr priority weight

[no] { ip | ipv6 } lisp use-petr { <petr> | <petr6> } priority <priority> weight <weight>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

lisp

LISP global configuration commands

use-petr

Encapsulate to Proxy ETR for matching forward-native entry

petr

IPv4 locator address of PETR

priority

Configures which Locators from a set are preferred

priority

Lower priority Locator takes preference

weight

Traffic load-spreading among Locators

weight

Specified in a percentage from 0 to 100

Command Mode

- /exec/configure /exec/configure/vrf

ip load-sharing address

[no] ip load-sharing address { source-destination [ port source-destination2 | gre | gre-outer ] | destination port2 destination2 | source } { [ rotate <rotate> ] | [ concatenation ] } + [ universal-id <random-seed> ] | no ip load-sharing address

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

load-sharing

ECMP load-sharing

address

Configure source/destination addresses, port numbers and hash

source-destination

Use both source and destination values for address

port

(Optional) Use source-destination value for port

gre

(Optional) Use source-destination value for gre-key

gre-outer

(Optional) Use outer IPv4 header fields for GRE tunnel hashing

source-destination2

(Optional) Use both source and destination values for port

destination

Use destination address

port2

Use destination value for port

destination2

Use destination port

source

Use source address

rotate

(Optional) Offset to be used in the hash

rotate

(Optional) Value used for offset, default value is 32

concatenation

(Optional) Enable/Disable concatenation

universal-id

(Optional) Universal-id to randomize hash functions for load-balance

random-seed

(Optional) Value used to randomize hash

Command Mode

- /exec/configure

ip load-sharing per-packet

ip load-sharing per-packet | no ip load-sharing [ per-packet ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

load-sharing

Style of load sharing

per-packet

Enable per-packet load balancing on interface

Command Mode

- /exec/configure/if-igp

ip local-proxy-arp

{ ip local-proxy-arp | no ip local-proxy-arp }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

local-proxy-arp

Configure local proxy ARP

Command Mode

- /exec/configure/if-igp /exec/configure/if-vlan-common

ip local policy route-map

ip local policy route-map <route-map-name> | no ip local policy route-map [ <route-map-name> | <route-map-name> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

local

Configure local PBR feature

policy

Configure PBR feature

route-map

Route-map for PBR

route-map-name

Route-map name

route-map-name

(Optional) Route-map name

route-map-name

(Optional) Known route-map name

Command Mode

- /exec/configure /exec/configure/vrf

ip mfwd event-history cli

[no] ip mfwd event-history cli { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

mfwd

Configures Global IP Multicast Forwarding

event-history

Configure event-history buffers

cli

CLI events for MCASTFWD

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip mfwd event-history l2

[no] ip mfwd event-history l2 { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

mfwd

Configures Global IP Multicast Forwarding

event-history

Configure event-history buffers

l2

Layer2 events for MCASTFWD

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip mfwd event-history packet

[no] ip mfwd event-history packet { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

mfwd

Configures Global IP Multicast Forwarding

event-history

Configure event-history buffers

packet

Packet events for Multicast forwarding

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip mfwd event-history vrf

[no] ip mfwd event-history vrf { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

mfwd

Configures Global IP Multicast Forwarding

event-history

Configure event-history buffers

vrf

VRF events for MCASTFWD

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip mfwd mstatic register

[no] ip mfwd mstatic register

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

mfwd

Configures Global IP Multicast Forwarding

mstatic

Static Multicast Route

register

Register

Command Mode

- /exec/configure

ip mroute

[no] ip mroute { <ip-addr> <ip-mask> | <ip-prefix> } { { <next-hop> | <nh-prefix> } | <interface> } [ <pref> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

mroute

Configure multicast RPF static route

ip-addr

IP prefix in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip-prefix

IP prefix and network mask length in format x.x.x.x/m

next-hop

IP next-hop address in format i.i.i.i

nh-prefix

IP next-hop prefix in format i.i.i.i/m

interface

Interface for interface static multicast routes

pref

(Optional) Route preference

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp description

ip msdp description <peer-address> <text> | no ip msdp description <peer-address> [ <text> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

description

Configure MSDP description for peer

peer-address

IP address of MSDP peer

text

Text description

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp event-history cli

[no] ip msdp event-history cli { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

event-history

Configure event-history buffer

cli

CLI logs for MSDP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip msdp event-history events

[no] ip msdp event-history events { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

event-history

Configure event-history buffer

events

Peer events for MSDP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip msdp event-history routes

[no] ip msdp event-history routes { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

event-history

Configure event-history buffer

routes

Route logs for MSDP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip msdp event-history tcp

[no] ip msdp event-history tcp { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

event-history

Configure event-history buffer

tcp

TCP logs for MSDP

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip msdp flush-routes

[no] ip msdp flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

flush-routes

Remove routes when restarting MSDP

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp group-limit source

[no] ip msdp group-limit <limit> source <sprefix>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

group-limit

Limit the number of groups per source

limit

Limit on number of groups

source

Sources to limit groups to

sprefix

Prefix to match sources against

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp keepalive

ip msdp keepalive <peer-address> <interval> <timeout> | no ip msdp keepalive <peer-address> [ <interval> <timeout> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

keepalive

Configure MSDP keepalive parameters for peer

peer-address

IP address of MSDP peer

interval

Keepalive interval in seconds

timeout

Keepalive timeout in seconds

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp mesh-group

ip msdp mesh-group <peer-address> <name> | no ip msdp mesh-group <peer-address> [ <name> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

mesh-group

Configure member of mesh-group

name

Name of mesh-group

peer-address

IP address of MSDP peer in mesh-group

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp no-sa-data

[no] ip msdp no-sa-data

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

no-sa-data

Don't send SA-encapsulated data

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp originator-id

ip msdp originator-id <interface> | no ip msdp originator-id [ <interface> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

originator-id

Configure alternative router-id for MSDP

interface

Use IP address of interface for originator-id

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp password

ip msdp password <peer-address> <password> | no ip msdp password <peer-address> [ <password> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

password

Configure MD5 authentication password

peer-address

IP address of MSDP peer

password

MD5 password

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp peer connect-source

{ { ip msdp peer <peer-address> connect-source <interface> [ remote-as <asn> ] } | { no ip msdp peer <peer-address> [ connect-source <interface> ] [ remote-as <asn> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

peer

Configure MSDP peer

peer-address

IP address of MSDP peer

connect-source

Configure local IP address for TCP connection

interface

Use IP address of interface for peer address

remote-as

(Optional) Configure remote Autonomous System Number

asn

(Optional) AS number

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp reconnect-interval

ip msdp reconnect-interval <interval> | no ip msdp reconnect-interval [ <interval> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

reconnect-interval

Configure connection reconnect interval

interval

Interval in seconds

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp redistribute

[no] ip msdp redistribute [ route-map <route-map-name> | prefix-list <prefix-list-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

redistribute

Configure SA policy for all MSDP peer

route-map

(Optional) route-map policy

route-map-name

(Optional) Route-map name

prefix-list

(Optional) Prefix list policy

prefix-list-name

(Optional) Name of prefix-list

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp sa-interval

ip msdp sa-interval <interval> | no ip msdp sa-interval [ <interval> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

sa-interval

Configure Source-Active message transmission interval

interval

Interval in seconds

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp sa-limit

ip msdp sa-limit <peer-address> <limit> | no ip msdp sa-limit <peer-address> [ <limit> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

sa-limit

Configure maximum (S,G) entries allowed

limit

Number of (S,G) entries

peer-address

IP address of MSDP peer in mesh-group

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp sa-policy in

[no] ip msdp sa-policy <peer-address> { <route-map-name> | prefix-list <prefix-list-name> | <rtr_pol_name> } in

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

sa-policy

Configure SA policy for MSDP peer

prefix-list

Prefix list policy

in

Input policy

peer-address

IP address of MSDP peer for SA policy

route-map-name

Route-map name

prefix-list-name

Name of prefix-list

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp sa-policy out

[no] ip msdp sa-policy <peer-address> { <route-map-name> | prefix-list <prefix-list-name> | <rtr_pol_name> } out

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

sa-policy

Configure SA policy for MSDP peer

prefix-list

Prefix list policy

out

Output policy

peer-address

IP address of MSDP peer for SA policy

route-map-name

Route-map name

prefix-list-name

Name of prefix-list

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ip msdp shutdown

ip msdp shutdown <peer-address> | no ip msdp shutdown <peer-address>

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

msdp

MSDP global configuration commands

shutdown

Administratively shut down peer

peer-address

IP address of MSDP peer

Command Mode

- /exec/configure /exec/configure/vrf

ip mtu eigrp

{ { { ip | ipv6 } mtu eigrp <eigrp-ptag> <mtu> } | { no { ip | ipv6 } mtu eigrp <eigrp-ptag> [ <mtu> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

mtu

Set Max Packet Size to be used by EIGRP

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

mtu

Interface MTU

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip multicast last-hop-meter

ip multicast last-hop-meter <kbps> [ <burst-size> ] | no ip multicast last-hop-meter [ <kbps> [ <burst-size> ] ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

multicast

Configure IP multicast global parameters

last-hop-meter

RPF-failed meter

kbps

Rate in kilobits/sec

burst-size

(Optional) Burst size in kilobytes

Command Mode

- /exec/configure

ip multicast multipath

[no] ip multicast multipath { none | legacy | s-g-hash [ next-hop-based ] | nbm }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

multicast

Configure IP multicast global parameters

multipath

Configure ECMP multicast load splitting

legacy

Configure hash based on source and group

none

Disable ECMP multicast load splitting

s-g-hash

Configure hash based on source and group address

next-hop-based

(Optional) Configure hash based on source, group, next-hop address

nbm

Configure NBM controlled RPF interface

Command Mode

- /exec/configure /exec/configure/vrf

ip multicast multipath resilient

[no] ip multicast multipath resilient

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

multicast

Configure IP multicast global parameters

multipath

Configure ECMP multicast load splitting

resilient

Configure resilient RPF interface

Command Mode

- /exec/configure /exec/configure/vrf

ip multicast rpf-meter

ip multicast rpf-meter { { <kbps> [ <burst-size> ] } | hardware-drop-all } | no ip multicast rpf-meter [ { <kbps> [ <burst-size> ] } | hardware-drop-all ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

multicast

Configure IP multicast global parameters

rpf-meter

RPF-failed meter

kbps

Rate in kilobits/sec

burst-size

(Optional) Burst size in kilobytes

hardware-drop-all

Drop all RPF-failed packets in hardware

Command Mode

- /exec/configure

ip multicast rpf mofrr

[no] ip multicast rpf mofrr { [ route-map <route-map-name> ] | [ damping-interval <secs> ] | [ resilient ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

multicast

Configure IP multicast global parameters

rpf

RIB based

mofrr

Multicast only fast re-route

route-map

(Optional) route-map policy

route-map-name

(Optional) route-map policy name

damping-interval

(Optional) Mofrr swover damping interval

secs

(Optional) Interval in seconds

resilient

(Optional) Make mofrr RPF resilient

Command Mode

- /exec/configure /exec/configure/vrf

ip name-server

[no] ip name-server { { <ipv4_0> | <ipv6_1> } [ { <ipv4_2> | <ipv6_3> } [ { <ipv4_4> | <ipv6_5> } [ { <ipv4_6> | <ipv6_7> } [ { <ipv4_8> | <ipv6_9> } [ { <ipv4_10> | <ipv6_11> } ] ] ] ] ] | { <ipv4_12> | <ipv6_13> } [ use-vrf { <vrf-name> | <vrf-known-name> } ] | { <ipv4_14> | <ipv6_15> } [ { <ipv4_16> | <ipv6_17> } [ use-vrf { <vrf-name> | <vrf-known-name> } ] ] | { <ipv4_18> | <ipv6_19> } [ { <ipv4_20> | <ipv6_21> } [ { <ipv4_22> | <ipv6_23> } [ use-vrf { <vrf-name> | <vrf-known-name> } ] ] ] | { <ipv4_24> | <ipv6_25> } [ { <ipv4_26> | <ipv6_27> } [ { <ipv4_28> | <ipv6_29> } [ { <ipv4_30> | <ipv6_31> } [ use-vrf { <vrf-name> | <vrf-known-name> } ] ] ] ] | { <ipv4_32> | <ipv6_33> } [ { <ipv4_34> | <ipv6_35> } [ { <ipv4_36> | <ipv6_37> } [ { <ipv4_38> | <ipv6_39> } [ { <ipv4_40> | <ipv6_41> } [ use-vrf { <vrf-name> | <vrf-known-name> } ] ] ] ] ] | { <ipv4_42> | <ipv6_43> } [ { <ipv4_44> | <ipv6_45> } [ { <ipv4_46> | <ipv6_47> } [ { <ipv4_48> | <ipv6_49> } [ { <ipv4_50> | <ipv6_51> } [ { <ipv4_52> | <ipv6_53> } [ use-vrf { <vrf-name> | <vrf-known-name> } ] ] ] ] ] ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

name-server

Specify nameserver address

ipv4_0

Enter an IPv4 address

ipv4_2

(Optional) Enter an IPv4 address

ipv4_4

(Optional) Enter an IPv4 address

ipv4_6

(Optional) Enter an IPv4 address

ipv4_8

(Optional) Enter an IPv4 address

ipv4_10

(Optional) Enter an IPv4 address

ipv4_12

Enter an IPv4 address

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4_14

Enter an IPv4 address

ipv4_16

(Optional) Enter an IPv4 address

ipv4_18

Enter an IPv4 address

ipv4_20

(Optional) Enter an IPv4 address

ipv4_22

(Optional) Enter an IPv4 address

ipv4_24

Enter an IPv4 address

ipv4_26

(Optional) Enter an IPv4 address

ipv4_28

(Optional) Enter an IPv4 address

ipv4_30

(Optional) Enter an IPv4 address

ipv4_32

Enter an IPv4 address

ipv4_34

(Optional) Enter an IPv4 address

ipv4_36

(Optional) Enter an IPv4 address

ipv4_38

(Optional) Enter an IPv4 address

ipv4_40

(Optional) Enter an IPv4 address

ipv4_42

Enter an IPv4 address

ipv4_44

(Optional) Enter an IPv4 address

ipv4_46

(Optional) Enter an IPv4 address

ipv4_48

(Optional) Enter an IPv4 address

ipv4_50

(Optional) Enter an IPv4 address

ipv4_52

(Optional) Enter an IPv4 address

Command Mode

- /exec/configure /exec/configure/vrf

ip nat inside

[no] ip nat { inside | outside }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

nat

NAT interface commands

inside

Inside interface for address translation

outside

Outside interface for address translation

Command Mode

- /exec/configure/if-port-channel /exec/configure/if-vlan /exec/configure/if-remote-ethernet /exec/configure/if-igp /exec/configure/if-routing

ip nat inside source

[no] ip nat inside source { { static <insideLocalIP> <insideGlobalIP> [ vrf <vrf-name> [ match-in-vrf ] ] [ group <group-id> [ dynamic ] ] [ add-route ] } | { static { tcp | udp } <insideLocalIP> <insideLocalPort> <insideGlobalIP> <insideGlobalPort> [ vrf <vrf-name> [ match-in-vrf ] ] [ group <group-id> [ dynamic ] ] [ add-route ] } | { list <acl-name> } { pool <pool-name> [ vrf <vrf-name> [ match-in-vrf ] ] [ overload ] | interface <globalAddrInterface> [ vrf <vrf-name> [ match-in-vrf ] ] overload } [ group <group-id> dynamic ] [ add-route ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

nat

NAT configuration commands

inside

Inside address translation

source

Source address translation

static

Specify static local->global mapping

tcp

Transmission Control Protocol

udp

User Datagram Protocol

list

Specify access list describing local addresses

pool

Name pool of global addresses

interface

Specify interface for global address

vrf

(Optional) Specify vrf

match-in-vrf

(Optional) Match incoming vrf

dynamic

(Optional) Dynamic twice NAT group

insideLocalIP

Inside local IP address

insideLocalPort

Local UDP/TCP port

insideGlobalIP

Inside global IP address

insideGlobalPort

Global UDP/TCP port

group

(Optional) Specify group for the twice NAT

group-id

(Optional) Group ID for the twice NAT

acl-name

Access-list-name

pool-name

Pool name for global addresses

add-route

(Optional) Add a static route for outside local address

vrf-name

(Optional) vrf name

globalAddrInterface

interface type and number in module/slot format

overload

(Optional) Overload an address translation

Command Mode

- /exec/configure

ip nat outside source

[no] ip nat outside source { static <outsideGlobalIP> <outsideLocalIP> [ vrf <vrf-name> [ match-in-vrf ] ] [ group <group-id> [ dynamic ] ] [ add-route ] | static { tcp | udp } <outsideGlobalIP> <outsideGlobalPort> <outsideLocalIP> <outsideLocalPort> [ vrf <vrf-name> [ match-in-vrf ] ] [ group <group-id> [ dynamic ] ] [ add-route ] | list <acl-name> pool <pool-name> [ vrf <vrf-name> [ match-in-vrf ] ] [ group <group-id> dynamic ] } [ add-route ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

nat

NAT configuration commands

outside

Outside address translation

source

Source address translation

static

Specify static global->local mapping

tcp

Transmission Control Protocol

udp

User Datagram Protocol

list

Specify access list describing local addresses

pool

Name pool of global addresses

vrf

(Optional) Specify vrf

match-in-vrf

(Optional) Match incoming vrf

outsideGlobalIP

Outside global IP address

outsideGlobalPort

Outside Global UDP/TCP port

outsideLocalIP

Outside local IP address

outsideLocalPort

Outside Local UDP/TCP port

group

(Optional) Specify group for the twice NAT

dynamic

(Optional) Dynamic twice NAT group

group-id

(Optional) Group ID for the twice NAT

acl-name

Access-list-name

vrf-name

(Optional) vrf name

pool-name

Pool name for global addresses

add-route

(Optional) Add a static route for outside local address

Command Mode

- /exec/configure

ip nat pool netmask

ip nat pool <pool-name> <start-ip> <end-ip> { netmask <netmask> | prefix-length <prefix-length> } [ no-alias ] | no ip nat pool <pool-name>

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

nat

NAT configuration commands

pool

Define pool of addresses

netmask

Specify the network mask

prefix-length

Specify the prefix length

no-alias

(Optional) Do not create alias for these pool addresses

pool-name

Pool name

start-ip

Start IP address

end-ip

End IP address

netmask

Network mask

prefix-length

Prefix length

Command Mode

- /exec/configure

ip nat pool netmask

ip nat pool <pool-name> { netmask <netmask> | prefix-length <prefix-length> } [ no-alias ]

Syntax Description

ip

Configure IP features

nat

NAT configuration commands

pool

Define pool of addresses

netmask

Specify the network mask

prefix-length

Specify the prefix length

no-alias

(Optional) Do not create alias for these pool addresses

pool-name

Pool name

netmask

Network mask

prefix-length

Prefix length

Command Mode

- /exec/configure

ip nat translation

[no] ip nat translation { tcp-timeout | udp-timeout | timeout } <timeout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

nat

NAT configuration commands

translation

NAT translation entry configuration

tcp-timeout

Specify timeout for NAT TCP flows

udp-timeout

Specify timeout for NAT UDP flows

timeout

Specify timeout for dynamic NAT flows

timeout

Timeout in seconds

Command Mode

- /exec/configure

ip nat translation max-entries

ip nat translation max-entries [ all-host ] <max> | no ip nat translation max-entries [ all-host ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

nat

NAT configuration commands

translation

NAT translation entry configuration

max-entries

Specify maximum number of NAT dynamic entries

all-host

(Optional) Specify maximum number of NAT entries for each host

max

Number of entries

Command Mode

- /exec/configure

ip nat translation sampling-timeout

[no] ip nat translation sampling-timeout <timeout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

nat

NAT configuration commands

translation

NAT translation entry configuration

sampling-timeout

Specify timeout after which the checking for activity is done

timeout

Timeout in seconds (max: 2days)

Command Mode

- /exec/configure

ip next-hop-self eigrp

[no] { ip | ipv6 } next-hop-self eigrp <eigrp-ptag>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

next-hop-self

Configures IP-EIGRP next-hop-self

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

Command Mode

- /exec/configure/if-igp

ip offset-list eigrp

[no] { ip | ipv6 } offset-list eigrp <eigrp-ptag> { { route-map <map> } | { prefix-list <list> } } { in | out } <offset>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

offset-list

Add or subtract offset from EIGRP metrics

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

route-map

Use a route-map for offset-list selection

map

Route-map name

prefix-list

Use a prefix-list for offset-list selection

list

Reference to prefix-list name

in

Perform offset on incoming updates

out

Perform offset on outgoing updates

offset

Offset

Command Mode

- /exec/configure/if-igp

ip ospf advertise-subnet

[no] ip ospf advertise-subnet

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

advertise-subnet

Advertise loopback interface IP subnet in router LSA

Command Mode

- /exec/configure/if-loopback

ip ospf authentication-key

{ { ip ospf authentication-key <key> } | { no ip ospf authentication-key [ <key> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

authentication-key

Configure the authentication key for the interface

key

Authentication key

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf authentication

[no] ip ospf authentication [ message-digest | null ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

authentication

Authentication on the interface

message-digest

(Optional) Use message-digest authentication

null

(Optional) Use null(disable) authentication

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf authentication key-chain

{ ip ospf authentication key-chain <keychain> } | { no ip ospf authentication key-chain [ <keychain> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

authentication

Authentication on the interface

key-chain

Authentication password key-chain

keychain

Key-chain name

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf bfd

[no] ip ospf bfd [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

bfd

Enable BFD on this interface

disable

(Optional) Disable BFD on this interface

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ip ospf cost

{ ip ospf cost <cost> } | { no ip ospf cost [ <cost> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

cost

Cost associated with interface

cost

Cost value

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf dead-interval

{ ip ospf dead-interval <interval> } | { no ip ospf dead-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

dead-interval

Dead interval

interval

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf event-history

[ ip ospf event-history { adjacency | event | ha | flooding | lsa | spf | redistribution | ldp | te | rib | hello | spf-trigger | objstore } size { <size_in_text> | <size_in_Kbytes> } ] | [ no ip ospf event-history { adjacency | event | ha | flooding | lsa | spf | redistribution | ldp | te | rib | hello | spf-trigger | objstore } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP events

ospf

Debug OSPF events

event-history

log debug events into event history buffer

adjacency

(Optional) Adjacency formation logs

event

(Optional) Internal event logs

ha

(Optional) HA and GR logs

flooding

(Optional) LSA flooding logs

lsa

(Optional) LSA generation and databse logs

spf

(Optional) SPF calculation logs

redistribution

(Optional) Redistribution logs

ldp

(Optional) LDP related logs

te

(Optional) MPLS TE related logs

rib

(Optional) RIB related logs

hello

(Optional) HELLO related logs

spf-trigger

(Optional) SPF TRIGGER related logs

objstore

(Optional) DME OBJSTORE related logs

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

- /exec/configure/router-ospf

ip ospf event-history cli size

[ no ip ospf event-history cli ] | [ ip ospf event-history cli size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

(Optional) IP events

ospf

(Optional) Debug OSPF events

event-history

(Optional) log debug events into event history buffer

cli

(Optional) Cli logs

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

- /exec/configure/router-ospf

ip ospf event-history detail size

[ no ip ospf event-history detail ] | [ ip ospf event-history detail size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

(Optional) IP events

ospf

(Optional) Debug OSPF events

event-history

(Optional) log debug events into event history buffer

detail

(Optional) Detailed event history buffer

size

(Optional) Configure the size of the verbose event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

- /exec/configure/router-ospf

ip ospf flood-bw-percentage

[no] ip ospf flood-bw-percentage <percentage>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

flood-bw-percentage

Percentage of bandwidth used for flooding

percentage

Negate a command or set its defaults

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf hello-interval

{ ip ospf hello-interval <interval> } | { no ip ospf hello-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

hello-interval

Hello interval

interval

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf message-digest-key md5

{ { ip ospf message-digest-key <keyid> md5 <key> } | { no ip ospf message-digest-key <keyid> [ md5 <key> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

message-digest-key

Message digest authentication password (key)

keyid

Key ID

md5

Use MD5 algorithm

key

The OSPF password (key)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf mtu-ignore

[no] ip ospf mtu-ignore

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

mtu-ignore

Disable OSPF MTU mismatch detection

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf network broadcast

{ ip ospf network { broadcast | point-to-point } } | { no ip ospf network [ { broadcast | point-to-point } ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

network

Network type

broadcast

Specify OSPF broadcast multi-access network

point-to-point

Specify OSPF point-to-point network

Command Mode

- /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ip ospf network point-to-point

{ ip ospf network point-to-point } | { no ip ospf network [ point-to-point ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

network

Network type

point-to-point

Specify OSPF point-to-point network

Command Mode

- /exec/configure/if-loopback

ip ospf passive-interface

[ default | no ] ip ospf passive-interface

Syntax Description

default

(Optional) Undo a command

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

passive-interface

Suppress routing updates on the interface

Command Mode

- /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ip ospf priority

{ ip ospf priority <prio> } | { no ip ospf priority [ <prio> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

priority

Router priority

prio

Router priority

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf retransmit-interval

{ ip ospf retransmit-interval <interval> } | { no ip ospf retransmit-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip ospf shutdown

[no] ip ospf shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

shutdown

shutdown ospf on this interface

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ip ospf transmit-delay

{ ip ospf transmit-delay <delay> } | { no ip ospf transmit-delay [ <delay> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ospf

OSPF configuration commands

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip passive-interface eigrp

[ default | no ] { ip | ipv6 } passive-interface eigrp <eigrp-ptag>

Syntax Description

default

(Optional) Undo a command

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

passive-interface

Suppress routing updates on an interface

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

Command Mode

- /exec/configure/if-igp

ip pim anycast-rp

[no] ip pim anycast-rp <anycast-rp> <rp-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

anycast-rp

Configure an RP in an Anycast-RP set (using PIM)

anycast-rp

Address for the Anycast-RP address

rp-addr

Address of RP in the Anycast-RP set

Command Mode

- /exec/configure /exec/configure/vrf

ip pim assert-pad

[no] ip pim assert-pad

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

assert-pad

Change the PIM assert padding for interoperability

Command Mode

- /exec/configure

ip pim assert-rate-limit

{ { ip pim assert-rate-limit <rate> } | { no ip pim assert-rate-limit [ <rate> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

assert-rate-limit

Rate limit for PIM Asserts

rate

Packets per second

Command Mode

- /exec/configure /exec/configure/vrf

ip pim auto-enable

{ { no ip pim auto-enable } | { ip pim auto-enable } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

auto-enable

Auto-enable configure on the vrf

Command Mode

- /exec/configure /exec/configure/vrf

ip pim auto-rp listen

{ ip pim auto-rp { listen | forward } + } | { no ip pim auto-rp [ { listen | forward } + ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

listen

Listen to Auto-RP messages

forward

Forward Auto-RP messages

Command Mode

- /exec/configure /exec/configure/vrf

ip pim auto-rp mapping-agent-policy

{ ip pim auto-rp mapping-agent-policy { <route-map-name> | <rtr_pol_name> } | no ip pim auto-rp mapping-agent-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

mapping-agent-policy

Specify policy for filtering Mapping Agent messages

route-map-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ip pim auto-rp mapping-agent send-rp-discovery

{ { ip pim { { auto-rp mapping-agent } | send-rp-discovery } <interface> [ scope <ttl> ] } | { no ip pim { { auto-rp mapping-agent } | send-rp-discovery } [ <interface> ] [ scope <ttl> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

send-rp-discovery

Configures router to send Auto-RP Discovery messages

mapping-agent

Configures router as an Auto-RP RP-mapping agent

interface

Use IP address of interface for Auto-RP Announce messages

scope

(Optional) Configure the scope of Auto-RP Discovery messages

ttl

(Optional) TTL value for scope

Command Mode

- /exec/configure /exec/configure/vrf

ip pim auto-rp rp-candidate-policy

{ ip pim auto-rp rp-candidate-policy { <route-map-name> | <rtr_pol_name> } | no ip pim auto-rp rp-candidate-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

rp-candidate-policy

Specify policy for filtering RP candidate messages

route-map-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ip pim auto-rp rp-candidate send-rp-announce group-list route-map prefix-list

{ { ip pim { auto-rp rp-candidate | send-rp-announce } { <interface> | <ipaddr> } { group-list <prefix> | route-map <route-map-name> | prefix-list <prefix-list-name> } { [ scope <ttl> ] | [ interval <interval> ] | [ bidir ] } + } | { no ip pim { { auto-rp rp-candidate } | send-rp-announce } [ <interface> | <ipaddr> ] [ group-list <prefix> | route-map <route-map-name> | prefix-list <prefix-list-name> ] { [ scope <ttl> ] | [ interval <interval> ] | [ bidir ] } } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

send-rp-announce

Configures router to send Auto-RP Announce messages

rp-candidate

Configures router to be an Auto-RP candidate RP

interface

Use IP address of interface for Auto-RP Announce messages

ipaddr

IP address of RP for group

group-list

Group range list

prefix

Prefix of group range

route-map

Group range policy for Auto-RP Candidate RP

route-map-name

Route-map name

prefix-list

Prefix List policy for Auto-RP Candidate RP

prefix-list-name

Name of prefix-list

scope

(Optional) Configure the scope of Auto-RP Announce messages

ttl

(Optional) TTL value for scope

interval

(Optional) Auto-RP Announce message transmission interval

interval

(Optional) Interval in seconds

bidir

(Optional) Group range advertised in PIM bidirectional mode

Command Mode

- /exec/configure /exec/configure/vrf

ip pim bfd-instance

[no] ip pim bfd-instance [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

bfd-instance

Configures BFD on interface

disable

(Optional) Disable BFD on interface

Command Mode

- /exec/configure/if-igp

ip pim bfd

[no] ip pim bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

bfd

Enable / Disable BFD for all PIM interfaces in the VRF

Command Mode

- /exec/configure /exec/configure/vrf

ip pim bidir-rp-limit

[no] ip pim bidir-rp-limit <limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

bidir-rp-limit

Configures maximum Bidir RPs for IPv4 PIM in this VRF

limit

Set limit for Bidir RPs permitted in IPv4 PIM

Command Mode

- /exec/configure /exec/configure/vrf

ip pim border-router

[no] ip pim border-router

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

border-router

Configures the interface to be a boundary of a PIM-SM domain

Command Mode

- /exec/configure/if-igp

ip pim border

[no] ip pim border

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

border

Configures interface to be a boundary of a PIM domain

Command Mode

- /exec/configure/if-igp

ip pim bsr-candidate

{ { ip pim [ bsr ] bsr-candidate <interface> [ hash-len <hash-len> ] [ priority <priority> ] [ interval <interval> ] } | { no ip pim [ bsr ] bsr-candidate [ <interface> ] [ hash-len <hash-len> ] [ priority <priority> ] [ interval <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

bsr

(Optional) Bootstrap protocol RP-distribution configuration

bsr-candidate

Configure router as a Bootstrap Router candidate

interface

Use IP address of interface for Bootstrap messages

hash-len

(Optional) Hash mask length used in Bootstrap messages

hash-len

(Optional) Hash mask length value

priority

(Optional) BSR priority used in Bootstrap messages

priority

(Optional) BSR priority value

interval

(Optional) Bootstrap message transmission interval

interval

(Optional) Interval in seconds

Command Mode

- /exec/configure /exec/configure/vrf

ip pim bsr bsr-policy

{ ip pim bsr bsr-policy { <route-map-name> | <rtr_pol_name> } | no ip pim bsr bsr-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

bsr

Bootstrap protocol RP-distribution configuration

bsr-policy

Specify policy for filtering BSR messages

route-map-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ip pim bsr listen

{ ip pim bsr { listen | forward } + } | { no ip pim bsr [ { listen | forward } + ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

bsr

Bootstrap protocol RP-distribution configuration

listen

Listen to Bootstrap/Candidate-RP messages

forward

Forward Bootstrap/Candidate-RP messages

Command Mode

- /exec/configure /exec/configure/vrf

ip pim bsr rp-candidate-policy

{ ip pim bsr rp-candidate-policy { <route-map-name> | <rtr_pol_name> } | no ip pim bsr rp-candidate-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

bsr

Bootstrap protocol RP-distribution configuration

rp-candidate-policy

Specify policy for filtering RP candidate messages

route-map-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ip pim cpu-punt dr-only

{ { no ip pim cpu-punt dr-only } | { ip pim cpu-punt dr-only } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

cpu-punt

Disable PIM NON-DR copy-to-cpu on RPF check failure

dr-only

Disable PIM NON-DR copy-to-cpu on RPF check failure

Command Mode

- /exec/configure /exec/configure/vrf

ip pim df-offer-burst-interval

[no] ip pim df-offer-burst-interval <burst-interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

df-offer-burst-interval

Interval between DF offer bursts

burst-interval

Interval in milliseconds

Command Mode

- /exec/configure /exec/configure/vrf

ip pim dr-delay

{ { ip pim dr-delay <delay> } | { no ip pim dr-delay [ <delay> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

dr-delay

Configures delay for PIM DR election on interface

delay

Delay value

Command Mode

- /exec/configure/if-igp

ip pim dr-priority

{ { ip pim dr-priority <priority> } | { no ip pim dr-priority [ <priority> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

dr-priority

Configures priority for PIM DR election on interface

priority

Priority value

Command Mode

- /exec/configure/if-igp

ip pim event-history assert

[no] ip pim event-history assert { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

assert

Assert events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history bidir

[no] ip pim event-history bidir { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

bidir

Bidir events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history cli

[no] ip pim event-history cli { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

cli

CLI events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history data-register-receive

[no] ip pim event-history data-register-receive { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

data-register-receive

Data register recv events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history hello

[no] ip pim event-history hello { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

hello

Hello events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history join-prune-summary

[no] ip pim event-history join-prune-summary { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

join-prune-summary

JoinPrune-Summary for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history join-prune-tw

[no] ip pim event-history join-prune-tw { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

join-prune-tw

JoinPrune-tw for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history join-prune

[no] ip pim event-history join-prune { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

join-prune

Join Prune events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history mrib

[no] ip pim event-history mrib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

Configure PIM event history

event-history

Configure event-history buffer

mrib

MRIB events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history mvpn

[no] ip pim event-history mvpn { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

Configure PIM event history

event-history

Configure event-history buffer

mvpn

MVPN events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history null-register

[no] ip pim event-history null-register { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

null-register

Null register events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history packet

[no] ip pim event-history packet { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

packet

Packet events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history pim-library

[no] ip pim event-history pim-library { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

Configure PIM event history

event-history

Configure event-history buffer

pim-library

PIM library events

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history rp

[no] ip pim event-history rp { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

rp

RP events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history txlist

[no] ip pim event-history txlist { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

Configure PIM event history

event-history

Configure event-history buffer

txlist

Txlist events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history vpc

[no] ip pim event-history vpc { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

Configure PIM event history

event-history

Configure event-history buffer

vpc

vPC events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim event-history vrf

[no] ip pim event-history vrf { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

event-history

Configure event-history buffer

vrf

VRF events for PIM

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip pim file-debug

[no] ip pim file-debug

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

file-debug

Collect all debugs to a file

Command Mode

- /exec/configure

ip pim flush-routes

[no] ip pim flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

flush-routes

Remove routes when restarting PIM

Command Mode

- /exec/configure /exec/configure/vrf

ip pim group-list

[no] ip pim { use-shared-tree-only | spt-threshold infinity } group-list { <route-map-name> | prefix-list <prefix-list-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

use-shared-tree-only

Use (*,G) only state, no source state is created

spt-threshold

Source-tree switching threshold

infinity

Never switch to source-tree

group-list

Specify group ranges through policy

route-map-name

Route-map name

prefix-list

Prefix List policy

prefix-list-name

Name of prefix-list

Command Mode

- /exec/configure /exec/configure/vrf

ip pim hello-authentication ah-md5

{ ip pim hello-authentication ah-md5 <auth-key> | no ip pim hello-authentication ah-md5 [ <auth-key> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

hello-authentication

Add AH header option to Hellos

ah-md5

Use MD5 HMAC

auth-key

MD5 authentication key

Command Mode

- /exec/configure/if-igp

ip pim hello-interval

{ { ip pim hello-interval <interval> } | { no ip pim hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

hello-interval

Configures the Hello interval for interface

interval

Interval in milliseconds

Command Mode

- /exec/configure/if-igp

ip pim jp-delay

{ { ip pim jp-delay <delay> } | { no ip pim jp-delay [ <delay> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

jp-delay

Join-Prune message inter-packet delay

delay

Delay value in microseconds

Command Mode

- /exec/configure /exec/configure/vrf

ip pim jp-interval

[no] ip pim jp-interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

jp-interval

Join-Prune interval used between peers

interval

Interval in seconds

Command Mode

- /exec/configure/if-igp

ip pim jp-policy

{ ip pim jp-policy { <route-map-name> | prefix-list <prefix-list-name> } [ in | out ] | no ip pim jp-policy { <route-map-name> | prefix-list <prefix-list-name> } [ in | out ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

jp-policy

Specify policy for receiving Join-Prune messages

route-map-name

Route-map name

prefix-list

Prefix List policy for static RP

prefix-list-name

Name of prefix-list

in

(Optional) Inbound

out

(Optional) Outbound

Command Mode

- /exec/configure/if-igp

ip pim log-neighbor-changes

[no] ip pim log-neighbor-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

log-neighbor-changes

Log up/down PIM neighbor transitions

Command Mode

- /exec/configure /exec/configure/vrf

ip pim mtu

[no] ip pim mtu <size>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

mtu

MTU for IP PIM packet

size

MTU

Command Mode

- /exec/configure

ip pim neighbor-policy prefix-list

{ { ip pim neighbor-policy { <route-map-name> | prefix-list <prefix-list-name> } } | { no ip pim neighbor-policy [ <route-map-name> | prefix-list <prefix-list-name> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

neighbor-policy

Configures a neighbor policy for filtering adjacencies

route-map-name

Route-map name

prefix-list

Prefix List policy for neighbor

prefix-list-name

Name of prefix-list

Command Mode

- /exec/configure/if-igp

ip pim non-dr flood

{ { no ip pim non-dr flood } | { ip pim non-dr flood } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

non-dr

Enable PIM NON-DR flood on vlan

flood

Enable PIM NON-DR flood on vlan

Command Mode

- /exec/configure /exec/configure/vrf

ip pim null-reg-delay

{ { ip pim null-reg-delay <delay> } | { no ip pim null-reg-delay [ <delay> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

null-reg-delay

Null registers inter-batch delay

delay

Delay value in microseconds

Command Mode

- /exec/configure /exec/configure/vrf

ip pim null-reg-routes

{ { ip pim null-reg-routes <num> } | { no ip pim null-reg-routes [ <num> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

null-reg-routes

Null registers number of routes

num

Numerical value

Command Mode

- /exec/configure /exec/configure/vrf

ip pim passive

{ ip pim passive | no ip pim passive }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

passive

Interface in passive mode. No send/recv

Command Mode

- /exec/configure/if-igp

ip pim pre-build-spt

{ { { ip pim pre-build-spt [ force ] } [ route-map <route-map-name> | prefix-list <prefix-list-name> ] } | { no ip pim pre-build-spt } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

pre-build-spt

Pre construct PIM trees for all known (S,G)s

force

(Optional) Enable pre-build-spt irrespective of (*,G) state

route-map

(Optional) Route Map policy for pre-build-spt

route-map-name

(Optional) Route-map name

prefix-list

(Optional) Prefix List policy for pre-build-spt

prefix-list-name

(Optional) Name of prefix-list

Command Mode

- /exec/configure /exec/configure/vrf

ip pim register-policy

{ ip pim register-policy { <route-map-name> | prefix-list <prefix-list-name> } | no ip pim register-policy [ <route-map-name> | prefix-list <prefix-list-name> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

register-policy

Specify policy for receiving Register messages

route-map-name

Route-map name

prefix-list

Prefix List policy for Registers

prefix-list-name

Name of prefix-list

Command Mode

- /exec/configure /exec/configure/vrf

ip pim register-rate-limit

{ { ip pim register-rate-limit <rate> } | { no ip pim register-rate-limit [ <rate> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

register-rate-limit

Rate limit for PIM data registers

rate

Packets per second

Command Mode

- /exec/configure /exec/configure/vrf

ip pim register-replicate

[no] ip pim register-replicate

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

register-replicate

Enable software replication of decapsulated PIM Register packets

Command Mode

- /exec/configure

ip pim register-source

{ { ip pim register-source { <src-interface> } } | { no ip pim register-source [ <src-interface> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

register-source

Configure source address for Register messages

src-interface

Use IP address of this interface for Register messages

Command Mode

- /exec/configure /exec/configure/vrf

ip pim register-until-stop

[no] ip pim register-until-stop

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

register-until-stop

Send Data Registers till Register Stop is received

Command Mode

- /exec/configure

ip pim restart-congestion-period

{ { ip pim restart-congestion-period <period> } | { no ip pim restart-congestion-period [ <period> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

restart-congestion-period

PIM restart congestion period

period

Period value in seconds

Command Mode

- /exec/configure /exec/configure/vrf

ip pim rp-address

{ { ip pim rp-address <rp-address> [ group-list <prefix> | route-map <route-map-name> | prefix-list <prefix-list-name> ] [ bidir ] [ override ] } | { no ip pim rp-address <rp-address> [ group-list <prefix> | route-map <route-map-name> | prefix-list <prefix-list-name> ] [ bidir ] [ override ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

rp-address

Configure static RP for group range

rp-address

IP address of router which is RP for group range

group-list

(Optional) Group range for static RP

prefix

(Optional) Group range prefix

route-map

(Optional) Route Map policy for static RP

route-map-name

(Optional) Route-map name

prefix-list

(Optional) Prefix List policy for static RP

prefix-list-name

(Optional) Name of prefix-list

bidir

(Optional) Group range is treated in PIM bidirectional mode

override

(Optional) RP address will override the dynamically learnt RPs

Command Mode

- /exec/configure /exec/configure/vrf

ip pim rp-candidate group-list route-map prefix-list

{ { ip pim [ bsr ] rp-candidate <interface> { group-list <prefix> | route-map <route-map-name> | prefix-list <prefix-list-name> } [ priority <priority> ] [ interval <interval> ] [ bidir ] } | { no ip pim [ bsr ] rp-candidate [ <interface> ] [ group-list <prefix> ] [ route-map <route-map-name> ] [ prefix-list <prefix-list-name> ] [ priority <priority> ] [ interval <interval> ] [ bidir ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

bsr

(Optional) Bootstrap protocol RP-distribution configuration

rp-candidate

Configure router as a Rendezvous Point (RP) candidate

interface

Use IP address of interface for Candidate-RP messages

group-list

Group range list

prefix

Prefix of group range

route-map

Group range policy for Candidate RP

route-map-name

Route-map name

prefix-list

Prefix List policy for Candidate RP

prefix-list-name

Name of prefix-list

priority

(Optional) RP priority used in Candidate-RP messages

priority

(Optional) RP priority value

interval

(Optional) Bootstrap message transmission interval

interval

(Optional) Interval in seconds

bidir

(Optional) Group range advertised in PIM bidirectional mode

Command Mode

- /exec/configure /exec/configure/vrf

ip pim sg-expiry-timer infinity

{ { ip pim [ sparse ] sg-expiry-timer { <expiry-time> | infinity } [ sg-list <route-map-name> | prefix-list <prefix-list-name> ] } | { no ip pim [ sparse ] sg-expiry-timer { <expiry-time> | infinity } [ sg-list <route-map-name> | prefix-list <prefix-list-name> ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

sparse

(Optional) PIM ASM

sg-expiry-timer

Adjust expiry time for PIM ASM (S,G) routes

expiry-time

Expiry timer interval in seconds

infinity

Never expire (S,G) route due to data inactivity

sg-list

(Optional) Specifies route-map for (S,G)s to apply the expiry timer

route-map-name

(Optional) Route-map name

prefix-list

(Optional) Specifies prefix-list for (S,G)s to apply the expiry timer

prefix-list-name

(Optional) Name of prefix-list

Command Mode

- /exec/configure /exec/configure/vrf

ip pim sparse-mode

ip pim sparse-mode | no ip pim [ sparse-mode ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

sparse-mode

Configures sparse-mode PIM on interface

Command Mode

- /exec/configure/if-igp

ip pim ssm

{ ip pim ssm { { range { <group> + | none } } | { route-map <route-map-name> } | { prefix-list <prefix-list-name> } } | no ip pim ssm { { range { <group> + | none } } | { route-map <route-map-name> } | { prefix-list <prefix-list-name> } } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

ssm

Source Specific Multicast (SSM) groups

range

Configure explicit group ranges

group

List of group range prefixes

route-map

Group range route-map policy for SSM range

route-map-name

Route-map name

prefix-list

Group range prefix-list policy for SSM range

prefix-list-name

Name of prefix-list

none

Remove all SSM group ranges

Command Mode

- /exec/configure /exec/configure/vrf

ip pim state-limit

{ { ip pim state-limit <max-states> [ reserved <route-map-name> <max-reserved> ] } | { no ip pim state-limit [ <max-states> [ reserved <route-map-name> <max-reserved> ] ] } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

state-limit

Configures State limit

max-states

Maximum (*,G)/(S,G) entries allowed in this VRF

reserved

(Optional) Configures Reserved limit

route-map-name

(Optional) Route-map name

max-reserved

(Optional) Maximum reserved (*,G)/(S,G) entries allowed in this VRF

Command Mode

- /exec/configure /exec/configure/vrf

ip pim strict-rfc-compliant

{ { ip pim strict-rfc-compliant } | { no ip pim strict-rfc-compliant } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM global configuration commands

strict-rfc-compliant

Don't process joins from unknown neighbors

Command Mode

- /exec/configure /exec/configure/vrf

ip pim strict-rfc-compliant

{ { ip pim strict-rfc-compliant } | { no ip pim strict-rfc-compliant } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

pim

PIM interface configuration commands

strict-rfc-compliant

Dont process joins from unknown neighbors on this interface

Command Mode

- /exec/configure/if-igp

ip ping source-interface

[no] ip ping source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ping

Configure ping client

source-interface

Configure source interface feature for ping client

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip policy match router-address

[no] ip policy match router-address

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

policy

Configure PBR feature

match

Match values

router-address

Router's IP address

Command Mode

- /exec/configure

ip policy route-map

ip policy route-map <route-map-name> | no ip policy route-map [ <route-map-name> | <route-map-name> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

policy

Configure PBR feature

route-map

Route-map for PBR

route-map-name

Route-map name

route-map-name

(Optional) Route-map name

route-map-name

(Optional) Known route-map name

Command Mode

- /exec/configure/if-igp

ip port-unreachable

[no] ip port-unreachable

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

port-unreachable

Enable sending ICMP port-unreachable

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config

ip port access-group

[no] ip port access-group <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

port

Port policy

access-group

Specify access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/if-set-acl-l2

ip port access-group

[no] ip port access-group <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

port

Port policy

access-group

Specify access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/system/acl

ip prefix-list description

{ ip prefix-list <ipv4-pfl-name> description <line> } | { no ip prefix-list <ipv4-pfl-name> description }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

prefix-list

Build a prefix list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

description

Description of the IP prefix list

line

IP prefix-list description string

Command Mode

- /exec/configure

ip prefix-list permit

{ ip prefix-list <ipv4-pfl-name> { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } [ mask <mask> ] } | { no ip prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } [ { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } [ mask <mask> ] ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

prefix-list

Build a prefix list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

permit

Specify routes to forward

deny

Specify routes to reject

prefix

IP prefix network/length, e.g., 35.0.0.0/8

eq

(Optional) Exact prefix length to be matched

equal

(Optional) Exact prefix length

ge

(Optional) Minimum prefix length to be matched

greater

(Optional) Minimum prefix length

le

(Optional) Maximum prefix length to be matched

lesser

(Optional) Maximum prefix length

mask

(Optional) Explicit match mask

mask

(Optional) Mask to use with the prefix

Command Mode

- /exec/configure

ip prefix-list seq permit

{ ip prefix-list <ipv4-pfl-name> seq <seq> { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } [ mask <mask> ] } | { no ip prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } seq <seq> [ { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } [ mask <mask> ] ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

prefix-list

Build a prefix list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

seq

Sequence number of an entry

seq

Sequence number

permit

Specify routes to forward

deny

Specify routes to reject

prefix

IP prefix network/length, e.g., 35.0.0.0/8

eq

(Optional) Exact prefix length to be matched

equal

(Optional) Exact prefix length

ge

(Optional) Minimum prefix length to be matched

greater

(Optional) Minimum prefix length

le

(Optional) Maximum prefix length to be matched

lesser

(Optional) Maximum prefix length

mask

(Optional) Explicit match mask

mask

(Optional) Mask to use with the prefix

Command Mode

- /exec/configure

ip proxy-arp

{ ip proxy-arp | no ip proxy-arp }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

proxy-arp

Configure proxy ARP

Command Mode

- /exec/configure/if-igp /exec/configure/if-vlan-common

ip radius source-interface

[no] ip radius source-interface | ip radius source-interface <interface>

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

radius

Radius server

source-interface

Source interface to be used to reach radius server

interface

Interface Description

Command Mode

- /exec/configure

ip redirects

ip redirects | no ip redirects

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

redirects

Send ICMP Redirect messages

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config

ip rip authentication key-chain

{ ip rip authentication key-chain <keychain> | no ip rip authentication key-chain [ <keychain> ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

rip

RIP configuration commands

authentication

Authentication control

key-chain

Set authentication key-chain

keychain

Name of key-chain

Command Mode

- /exec/configure/if-igp

ip rip authentication mode text

{ ip rip authentication mode { text | md5 } | no ip rip authentication mode [ { text | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

rip

RIP configuration commands

authentication

RIP authentication control

mode

Set authentication mode

text

Clear text authentication

md5

Keyed message digest

Command Mode

- /exec/configure/if-igp

ip rip metric

{ ipv6 | ip } rip { metric-offset | offset-list } <metric> | no { ipv6 | ip } rip { metric-offset | offset-list } [ <metric> ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

ip

Configure IP features

rip

RIP configuration commands

metric-offset

RIP metric for interface

offset-list

RIP metric for interface

metric

RIP metric value

Command Mode

- /exec/configure/if-igp

ip rip passive-interface

[no] { ipv6 | ip } rip passive-interface

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

ip

Configure IP features

rip

RIP configuration commands

passive-interface

RIP passive interface

Command Mode

- /exec/configure/if-igp

ip rip poison-reverse

[no] { ipv6 | ip } rip poison-reverse

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

ip

Configure IP features

rip

RIP configuration commands

poison-reverse

RIP poison reverse (default split-horizon)

Command Mode

- /exec/configure/if-igp

ip rip route-filter route in

[no] { ipv6 | ip } rip route-filter { route-map <map> | prefix-list <list> } { in | out }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

ip

Configure IP features

rip

RIP configuration commands

route-filter

RIP route filtering

route-map

route-map policy to constrain route filtering

prefix-list

prefix-list policy to constrain route filtering

map

Route-map name

list

prefix-list name

in

inbound

out

outbound

Command Mode

- /exec/configure/if-igp

ip rip summary-address

[no] ip rip summary-address <ip-prefix> | no ipv6 rip summary-address <ipv6-prefix> | ipv6 rip summary-address <ipv6-prefix>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

rip

RIP configuration commands

summary-address

RIP summarization address

ip-prefix

Exact prefix

Command Mode

- /exec/configure/if-igp

ip route

[no] ip route { <ip-addr> <ip-mask> | <ip-prefix> } { <interface> | { { <pin-interface> <next-hop> } | { <next-hop> | <nh-prefix> } | { <vlan-interface> } } [ vrf { <vrf-name> | <vrf-known-name> } ] } [ track <object-num> ] [ name <rt-name> ] [ tag <tag-value> | <pref> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

route

Route information

ip-addr

IP prefix in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip-prefix

IP prefix and network mask length in format x.x.x.x/m

pin-interface

Pin interface

next-hop

IP next-hop address in format i.i.i.i

nh-prefix

IP next-hop prefix in format i.i.i.i/m

interface

Interface for interface static routes

vlan-interface

vlan interface

track

(Optional) Specify the Object to be Tracked

object-num

(Optional) Track Object Number

name

(Optional) Specify name of the next hop

rt-name

(Optional) Name of next hop

pref

(Optional) Route preference

tag

(Optional) Supply tag value with static route

tag-value

(Optional) 32-bit value for tag

vrf

(Optional) VRF for next-hop if different from this vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure /exec/configure/config-mgmt /exec/configure/vrf

ip route static bfd

[no] ip route static bfd <pin-interface> <next-hop>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

route

Route information

static

Static route based configuration

bfd

Enable bfd detection on static route

pin-interface

Interface on which bfd has to be enabled

next-hop

IP next-hop address in format i.i.i.i

Command Mode

- /exec/configure /exec/configure/config-mgmt /exec/configure/vrf

ip router eigrp

[no] { ip | ipv6 } router eigrp <eigrp-ptag>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

router

Enable a routing process

eigrp

Configure an EIGRP routing process on interface

eigrp-ptag

Process tag

Command Mode

- /exec/configure/if-igp

ip router isis

[no] ip router isis <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

router

Enable a routing process

isis

Intermediate System to Intermediate System (IS-IS)

tag

Process tag

Command Mode

- /exec/configure/if-igp

ip router ospf area

[no] ip router ospf <tag> area { <area-id-ip> | <area-id-int> } [ secondaries none ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

router

Enable a routing process

ospf

OSPF configuration commands

tag

Process tag

area

Area associated with interface

area-id-ip

OSPF area ID in IP address format

area-id-int

OSPF area ID as a decimal format

secondaries

(Optional) Do not include secondary IP addresses

none

(Optional) Do not include secondary IP addresses

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip router ospf multi-area

[no] ip router ospf [ <tag> ] multi-area <area-id-ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

router

Enable a routing process

ospf

OSPF configuration commands

tag

(Optional) Process tag

multi-area

Multi area associated with interface

area-id-ip

Area Id as an integer or ip address

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ip router rip

[no] { ipv6 | ip } router rip <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

router

Enable a routing process

rip

Routing Information Protocol (RIP)

tag

Process tag

Command Mode

- /exec/configure/if-igp

ip routing download-on-convergence

[no] ip routing download-on-convergence

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP events

routing

Enable debugging for routing events

download-on-convergence

Download Routes/RNHs after Table Convergence

Command Mode

- /exec/configure

ip routing event-history

[no] ip routing event-history { add-route | cli | delete-route | detail | errors | general | ha | loop-detection | modify-route | notifications | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary } size { <size_in_text> | <size_in_bytes> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

event-history

Configure routing event log

add-route

Add route

cli

CLI

delete-route

Delete route

detail

Detail

errors

Errors

general

General

ha

HA

loop-detection

Loop detection

modify-route

Modify route

notifications

Notification

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

size

Size of buffer

size_in_text

Buffer size

size_in_bytes

Enter an integer value for the event history buffer

Command Mode

- /exec/configure

ip routing multicast enforce-rpf

[no] ip routing multicast enforce-rpf

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Configure routing information

multicast

Configure multicast

enforce-rpf

Enforce RPF Check

Command Mode

- /exec/configure

ip routing multicast event-history cli

[no] ip routing multicast event-history cli { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

cli

CLI events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history mdt

[no] ip routing multicast event-history mdt { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

mdt

MDT events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history mfdm-debugs

[no] ip routing multicast event-history mfdm-debugs { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

mfdm-debugs

MFDM debugs for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history mfdm-events

[no] ip routing multicast event-history mfdm-events { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure mfdm-stats event-history buffer

event-history

Configure event history buffers

mfdm-events

Non-periodic MFDM events in MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history mfdm-stats

[no] ip routing multicast event-history mfdm-stats { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

mfdm-stats

MFDM-Stats events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history notify-clients

[no] ip routing multicast event-history notify-clients { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

notify-clients

Clients notify debugs for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history rib-summary

[no] ip routing multicast event-history rib-summary { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event-history buffers

rib-summary

RIB events for MRIB-summary

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history rib

[no] ip routing multicast event-history rib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event-history buffers

rib

RIB events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history urib-debugs

[no] ip routing multicast event-history urib-debugs { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

urib-debugs

URIB debugs for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast event-history vrf

[no] ip routing multicast event-history vrf { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

vrf

VRF events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ip routing multicast file-debug

[no] { ip | ipv4 } routing multicast file-debug

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv4

Configure IP features

routing

Routing information

multicast

Configure multicast

file-debug

Collect all debugs to a file

Command Mode

- /exec/configure

ip routing multicast holddown

{ ip | ipv4 } routing multicast holddown { <route-holddown-sec> | <none> } | no { ip | ipv4 } routing multicast holddown [ <route-holddown-sec> | <none> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv4

Configure IP features

routing

Routing information

multicast

Configure multicast

holddown

Initial holddown period

route-holddown-sec

Delay in seconds

none

Disable holddown

Command Mode

- /exec/configure

ip routing multicast software-replicate

[no] ip routing multicast software-replicate [ iif ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

routing

Routing information

multicast

Configure multicast

software-replicate

Enable software replication of PIM ASM leak packets

iif

(Optional) Enable software replication on incoming interface

Command Mode

- /exec/configure

ip rsvp

[no] ip rsvp

Syntax Description

ip

Configure IP features

rsvp

RSVP configuration commands

Command Mode

- /exec/configure

ip secondary

ip { <ipaddress> | <ipprefix> } secondary | no ip { <ipaddress> | <ipprefix> } secondary

Syntax Description

no

Negate a command or set its defaults

ip

Enable HSRP IPv4 and set the virtual IP address

ipaddress

Virtual IP address

ipprefix

Virtual IP address and mask length

secondary

Make this IP address a secondary virtual IP address

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4

ip sla

[no] ip sla <index>

Syntax Description

no

(Optional)

ip

sla

Service Level Agreement (SLA)

index

Entry Number

Command Mode

- /exec/configure

ip sla group schedule

{ no ip sla group schedule <group-id> | ip sla group schedule <group-id> { { add <operation-ids> | delete <operation-ids> } | { <operation-ids> schedule-period <schedule-period-seconds> { [ ageout <ageout-seconds> ] [ frequency { <frequency-seconds> | range <random-frequency-range> } ] [ life { forever | <life-seconds> } ] [ start-time { <hhmm> [ { January | February | March | April | May | June | July | August | September | October | November | December } <day> | <day> [ January | February | March | April | May | June | July | August | September | October | November | December ] ] | pending | now | after <hhmm> } ] } + } | reschedule } }

Syntax Description

no

add

delete

start-time

(Optional) January

October

(Optional) November

operation-ids

<schedule-period-seconds>

random-frequency-range

(Optional) <ageout-seconds>

ip

sla

Service Level Agreement (SLA)

group

Group Configuration or Group Scheduling

schedule

Group scheduling

group-id

Group schedule entry number

delete

Delete probes from existing group

reschedule

Reschedule the group using previous config

operation-ids

Multiple probe ID's to be group scheduled

schedule-period

Group schedule period range

schedule-period-seconds

seconds

frequency

(Optional) Group operation frequency

range

(Optional) Group operation frequency-range for random scheduling

frequency-seconds

(Optional) Specify frequency in seconds

ageout

(Optional) How long to keep this Entry when inactive

ageout-seconds

(Optional) Ageout Seconds

life

(Optional) Length of time to execute in seconds

life-seconds

(Optional) Life seconds (default 3600)

forever

(Optional) continue running forever

after

(Optional) Start after a certain amount of time from now

hhmm

(Optional) Start time (hh:mm)

January

(Optional) Month of year

February

(Optional) Month of year

March

(Optional) Month of year

April

(Optional) Month of year

May

(Optional) Month of year

June

(Optional) Month of year

July

(Optional) Month of year

August

(Optional) Month of year

September

(Optional) Month of year

October

(Optional) Month of year

November

(Optional) Month of year

December

(Optional) Month of year

day

(Optional) Day of month

now

(Optional) Start now

pending

(Optional) Start pending

Command Mode

- /exec/configure

ip sla logging traps

[no] ip sla logging traps

Syntax Description

no

(Optional)

ip

sla

Service Level Agreement (SLA)

logging

Enable Syslog

traps

Enable syslog traps

Command Mode

- /exec/configure

ip sla reaction-configuration react

[no] ip sla reaction-configuration <react-cfg-entry-num> react <monitored-element> | ip sla reaction-configuration <react-cfg-entry-num> react <monitored-element> { [ action-type <action> ] [ threshold-value <rising-value> <falling-value> ] [ threshold-type { <neverImmed> | <consecutive> [ <consecutive-occurances> ] | <xOfy> [ <x-value> <y-value> ] | <average> [ <n-attempts> ] } ] } +

Syntax Description

no

action-type

(Optional) threshold-value

falling-value

(Optional) <neverImmed>

consecutive-occurances

(Optional) <x-value>

ip

sla

Service Level Agreement (SLA)

reaction-configuration

IP SLAs Reaction-Configuration

react-cfg-entry-num

Entry Number

react

Reaction variable to be configured

monitored-element

monitored element

action

(Optional)

threshold-value

(Optional) Threshold Value

rising-value

(Optional) Upper limit for Threshold

threshold-type

(Optional) Threshold Type

neverImmed

(Optional)

consecutive

(Optional)

xOfy

(Optional)

average

(Optional)

x-value

(Optional) X value

y-value

(Optional) Y value

n-attempts

(Optional) N Value

Command Mode

- /exec/configure

ip sla reaction-trigger

[no] ip sla reaction-trigger <entry-num> <target-entry>

Syntax Description

no

(Optional)

ip

sla

Service Level Agreement (SLA)

reaction-trigger

IP SLAs Trigger Assignment

entry-num

Entry Number

target-entry

Target entry Number

Command Mode

- /exec/configure

ip sla reset

ip sla reset

Syntax Description

ip

sla

Service Level Agreement (SLA)

reset

IP SLAs Reset

Command Mode

- /exec/configure

ip sla responder

[no] ip sla responder [ { tcp-connect [ ipaddress<tcp-ip> ] port <tcp-port> } | { udp-echo [ ipaddress <udp-ip> ] port <udp-port> } ]

Syntax Description

tcp-connect

(Optional) ipaddress

no

(Optional)

ip

sla

responder

Enable IP SLAs Responder

ipaddress

(Optional) Permanent address

port

(Optional) Permanent port

tcp-port

(Optional) Port Number

udp-echo

(Optional) Setup udp-echo responder

udp-ip

(Optional) IP Address or IP HostName

udp-port

(Optional) Port Number

Command Mode

- /exec/configure

ip sla restart

ip sla restart <index>

Syntax Description

ip

sla

Service Level Agreement (SLA)

restart

Restart An Active Entry

index

Entry Number

Command Mode

- /exec/configure

ip sla schedule

{ no ip sla schedule <index> | ip sla schedule <index> { [ life { <life-seconds> | forever } ] [ start-time { <hhmm> [ { January | February | March | April | May | June | July | August | September | October | November | December } <day> | <day> [ January | February | March | April | May | June | July | August | September | October | November | December ] ] | pending | now | { after <hhmm> } } ] [ ageout <ageout-seconds> ] [ recurring ] } + }

Syntax Description

no

life

(Optional) forever

August

(Optional) September

recurring

(Optional) <life-seconds>

ip

sla

Service Level Agreement (SLA)

schedule

Entry Scheduling

index

Entry Number

life-seconds

(Optional) Life seconds (default 3600)

forever

(Optional) continue running forever

start-time

(Optional) When to start this entry

hhmm

(Optional) Start time (hh:mm)

January

(Optional) Month of year

February

(Optional) Month of year

March

(Optional) Month of year

April

(Optional) Month of year

May

(Optional) Month of year

June

(Optional) Month of year

July

(Optional) Month of year

August

(Optional) Month of year

September

(Optional) Month of year

October

(Optional) Month of year

November

(Optional) Month of year

December

(Optional) Month of year

day

(Optional) Day of month

now

(Optional) Start now

after

(Optional) Start after a certain amount of time from now

pending

(Optional) Start pending

ageout

(Optional) How long to keep this Entry when inactive

ageout-seconds

(Optional) Ageout Seconds

Command Mode

- /exec/configure

ip source-route

[no] ip source-route

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

source-route

IP source routing option

Command Mode

- /exec/configure

ip source binding vlan interface

[no] ip source binding <ipaddr1> <macaddr> vlan <vlanid> interface <interface1>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

source

IP source

binding

Static binding

ipaddr1

IP address

macaddr

MAC address

vlan

VLAN

vlanid

VLAN id

interface

interface

interface1

interface

Command Mode

- /exec/configure

ip source icmp-errors

[no] ip source <interface> icmp-errors

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

source

Configure source-address for applications

interface

Interface to pick source-address from

icmp-errors

ICMP unreachable/TTL-exceeded/param-prob messages

Command Mode

- /exec/configure /exec/configure/vrf

ip split-horizon eigrp

[no] { ip | ipv6 } split-horizon eigrp <eigrp-ptag>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

split-horizon

Configures IP-EIGRP split-horizon on interface

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

Command Mode

- /exec/configure/if-igp

ip ssh source-interface

[no] ip ssh source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ssh

Configure ssh

source-interface

Configure source interface feature for domain-lookup

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip sticky-arp

{ ip sticky-arp [ ignore ] | no ip sticky-arp ignore }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

sticky-arp

Configure sticky ARP

ignore

(Optional) Ignore previously configured sticky ARP

Command Mode

- /exec/configure/if-igp /exec/configure/if-vlan-common

ip summary-address eigrp ipv6 summary-address eigrp

{ [ no ] ip summary-address eigrp <eigrp-ptag> { { <address> <mask> } | { <prefix> } } [ <distance> ] [ leak-map <leak-map> ] | [ no ] ipv6 summary-address eigrp <eigrp-ptag> <ipv6-prefix> [ <distance> ] [ leak-map <leak-map> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

summary-address

Configures IP-EIGRP summary address on interface

eigrp

EIGRP interface configuration commands

eigrp-ptag

Process tag

address

IP address

mask

IP network mask

prefix

IP prefix in slash format

distance

(Optional) Administrative distance

leak-map

(Optional) Allow dynamic prefixes based on the leak-map

leak-map

(Optional) leak-map name

eigrp-ptag

Command Mode

- /exec/configure/if-igp

ip tacacs source-interface

[no] ip tacacs source-interface | ip tacacs source-interface <interface>

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

tacacs

Tacacs server

source-interface

Source interface to be used to reach tacacs server

interface

Interface Description

Command Mode

- /exec/configure

ip tcp path-mtu-discovery

{ { ip tcp path-mtu-discovery } | { no ip tcp path-mtu-discovery } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

tcp

Global TCP parameters

path-mtu-discovery

Enable path-MTU discovery on TCP

Command Mode

- /exec/configure /exec/configure/config-mgmt

ip tcp synwait-time

{ { no ip tcp synwait-time } | { ip tcp synwait-time <time> } }

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

tcp

Global TCP parameters

synwait-time

Set time to wait on new TCP connections

time

Wait time

Command Mode

- /exec/configure /exec/configure/config-mgmt

ip telnet source-interface

[no] ip telnet source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

telnet

Configure telnet

source-interface

Configure source interface feature for domain-lookup

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip tftp source-interface

[no] ip tftp source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

tftp

Configure TFTP client

source-interface

Configure source interface feature for TFTP client

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip traceroute source-interface

[no] ip traceroute source-interface <ifnum> [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

traceroute

Configure traceroute client

source-interface

Configure source interface feature for traceroute

ifnum

Source interface

vrf

(Optional) Configure VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure

ip ttl

[no] ip ttl <ttl_value>

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Set ERSPAN IP options

ttl

Set the IP time-to-live value

ttl_value

Command Mode

- /exec/configure/config-monitor-erspan-src

ip unnumbered

ip unnumbered <interface> | no ip unnumbered [ <interface> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

unnumbered

Configure interface as unnumbered

interface

Interface with IP address

Command Mode

- /exec/configure/ppm-ethernet-switch /exec/configure/if-p2p /exec/configure/if-gre-tunnel /exec/configure/if-any-tunnel /exec/configure/if-port-channel-sub

ip unreachables

[no] ip unreachables

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

unreachables

Enable sending ICMP unreachables (other than port-unreachable)

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config

ip verify source dhcp-snooping-vlan

[no] ip verify source dhcp-snooping-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

verify

Configure Unicast Reverse Path Forwarding or IP Source Guard

source

IP Source Guard related commands

dhcp-snooping-vlan

Vlans on which snooping is enabled

Command Mode

- /exec/configure/if-switching

ip verify unicast source reachable-via rx

[no] ip verify unicast source reachable-via { rx | any } [ policy { <policy-name> | <acl_pol_name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

verify

Configure Unicast Reverse Path Forwarding or IP Source Guard

unicast

Unicast Reverse Path Forwarding

source

Validation of source address

reachable-via

Specify reachability check to apply to the source address

rx

Source is reachable via interface on which packet was received

any

Source is reachable via any interface

policy

(Optional) Unicast Reverse Path Forwarding fail policy

policy-name

(Optional) An uRPF fail policy name

acl_pol_name

(Optional) An existing access-rules policy

Command Mode

- /exec/configure/if-igp

ipv6

{ [ <seqno> ] | no } <permitdeny> { ipv6 | <proto> | <ipv6_other_proto> } { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ { dscp { <dscp_num> | <dscp_str> } } ] [ { flow-label <flow_num> } ] [ fragments ] [ log ] [ time-range <time_range_name> ] [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ capture session <session-id> ] { [ <actionv6> <actionidv6> ] }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

ipv6

Any IPV6 protocol

proto

A protocol number

ipv6_other_proto

ipv6_other_proto

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

src_any

Any

src_key_host

A single source host

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

dst_any

Any

dst_key_host

A single destination host

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

flow-label

(Optional) Flow label

flow_num

(Optional) Flow label value

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

actionv6

(Optional) ActionV6

actionidv6

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipv6acl

ipv6 access-class

[no] ipv6 access-class <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

access-class

Specify IPv6 access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/line

ipv6 access-list

[no] ipv6 access-list <name> [ client <clienttype> <clientID> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

access-list

Configure access list

name

List name

client

(Optional) set client type

clienttype

(Optional) CLI/ONEP

clientID

(Optional) client appID

Command Mode

- /exec/configure

ipv6 access-list match-local-traffic

[no] ipv6 access-list match-local-traffic | ipv6 access-list match-local-traffic

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

access-list

Configure access list

match-local-traffic

Enable access-list matching for locally generated traffic

Command Mode

- /exec/configure

ipv6 address

[no] ipv6 address [ { autoconfig [ default ] | [ <ipv6-prefix> [ eui64 ] [ route-preference <pref> ] [ tag <tag> ] [ anycast ] ] } ] | ipv6 address { autoconfig [ default ] | [ <ipv6-prefix> [ eui64 ] [ route-preference <pref> ] [ tag <tag> ] [ anycast ] ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

address

Configure IPv6 address on interface

autoconfig

(Optional) Configure IPv6 Stateless address autoconfig

default

(Optional) For SLAAC, adds default route and the nh would be fetched from RA source address

eui64

(Optional) Configure Extended Unique Identifier for the low-order 64 bits

anycast

(Optional) Configure IPv6 anycast address on interface

route-preference

(Optional) U6RIB route preference for local/direct routes

pref

(Optional) Local/direct route preference

tag

(Optional) U6RIB route tag value for local/direct routes

tag

(Optional) Local/direct tag value

Command Mode

- /exec/configure/if-igp /exec/configure/if-any-tunnel /exec/configure/if-vsan /exec/configure/if-mgmt-config

ipv6 address dhcp

[no] ipv6 address dhcp

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

address

Configure IPv6 address on interface

dhcp

Configure IPv6 address from a dhcp server

Command Mode

- /exec/configure/if-vlan /exec/configure/if-ethernet /exec/configure/if-mgmt-config /exec/configure/if-ethernet-all /exec/configure/if-sub

ipv6 address secondary

ipv6 address <ipv6-prefix> [ eui64 ] secondary

Syntax Description

ipv6

Configure IPv6 features

address

Configure IPv6 address on interface

eui64

(Optional) Configure Extended Unique Identifier for the low-order 64 bits

secondary

Configures additional addresses on interface

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-vsan

ipv6 address use-link-local-only

[no] ipv6 address use-link-local-only | ipv6 address use-link-local-only

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

address

Configure IPv6 address on interface

use-link-local-only

Enable IPv6 on interface using only a single link-local address

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-vsan

ipv6 adjacency-stale-timer

{ { ipv6 [ icmp ] adjacency-stale-timer <stale-time> } | { no ipv6 [ icmp ] adjacency-stale-timer [ <stale-time> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

icmp

(Optional) Configure icmp parameters

adjacency-stale-timer

When probing for an adjacency begins

stale-time

Seconds after adjacency uptime

Command Mode

- /exec/configure

ipv6 adjacency forcedownload

ipv6 adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ipv6-addr> } | * } forcedownload

Syntax Description

ipv6

Configure IPv6 features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

*

for all adjacencies in this context

forcedownload

Create consistancy in UFDM

Command Mode

- /exec/configure

ipv6 adjacency l2fm-reg

[no] ipv6 adjacency l2fm-reg { [ vrf <vrf-known-name> ] | <interface> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

adjacency

Configure Adjmgr

l2fm-reg

Register with l2fm

vrf

(Optional) vrf name

vrf-known-name

(Optional) Known VRF name

interface

Interface name

Command Mode

- /exec/configure

ipv6 adjacency peer-gmac

[no] ipv6 adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ipv6-addr> } | * } peer-gmac

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

*

for all adjacencies in this context

peer-gmac

Set/clear the peer-gmac bit

Command Mode

- /exec/configure

ipv6 adjacency remote-adj

[no] ipv6 adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ipv6-addr> } | * } remote-adj

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

*

for all adjacencies in this context

remote-adj

Set/clear the remote-adj bit

Command Mode

- /exec/configure

ipv6 adjacency route distance

{ ipv6 adjacency route distance <pref> } | { no ipv6 adjacency route distance }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

adjacency

Configure Adjmgr

route

route

distance

admin-distance

pref

preference

Command Mode

- /exec/configure

ipv6 amt gateway

[no] ipv6 amt gateway

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

amt

AMT global configuration commands

gateway

Configures IPv6 AMT gateway functionality

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 amt gateway send-discovery

[no] ipv6 amt gateway send-discovery

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

amt

AMT global configuration commands

gateway

Configures IPv6 AMT gateway functionality

send-discovery

Trigger a Discovery message to the Anycast address

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 amt relay

[no] ipv6 amt relay

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

amt

AMT global configuration commands

relay

Configures IPv6 AMT relay functionality

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 cache disable

[no] ipv6 cache disable

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

cache

Disable cache

disable

Disable cache

Command Mode

- /exec/configure

ipv6 dad

ipv6 dad { skip-results | force-dad | address <ipv6-prefix> } | no ipv6 dad skip-results

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

dad

Duplicate Address Detection

skip-results

Skip DAD results

force-dad

Does force DAD on given interface

address

Address to verify duplicate address in LAN

Command Mode

- /exec/configure/if-igp

ipv6 destination

{ ipv6 { destination | source } <addr> } | { no ipv6 { destination | source } }

Syntax Description

no

Negate a command or set its defaults

ipv6

specify flow ipv6 address

source

specify flow source ipv6 address

destination

specify flow destination ipv6 address

Command Mode

- /exec/configure/configngoamprofileflow

ipv6 dhcp relay

[no] ipv6 dhcp relay

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

dhcp

Configure DHCPv6 relay

relay

Configure DHCPv6 relay agent

Command Mode

- /exec/configure

ipv6 dhcp relay address

[no] ipv6 dhcp relay address [ <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <interface-name> ] ] | no ipv6 dhcp relay address [ <ip-addr-val> [ interface <interface-name> ] [ use-vrf <vrf-name> ] ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

dhcp

Configure DHCPv6 relay

relay

Configure DHCPv6 relay agent

address

Configure DHCPv6 server relay address

use-vrf

(Optional) server address VRF membership

vrf-name

(Optional) VRF name

interface

(Optional) Destination interface for the relay address

interface-name

(Optional) Destination interface

Command Mode

- /exec/configure/if-igp

ipv6 dhcp relay address ipv6 dhcp relay address

ipv6 dhcp relay address <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <interface-name> ] | ipv6 dhcp relay address <ip-addr-val> [ interface <interface-name> ] [ use-vrf <vrf-name> ]

Syntax Description

ipv6

Configure IPv6 features

dhcp

Configure DHCPv6 relay

relay

Configure DHCPv6 relay agent

address

Configure DHCPv6 server relay address

use-vrf

(Optional) server address VRF membership

vrf-name

(Optional) VRF name

interface

(Optional) Destination interface for the relay address

interface-name

(Optional) Destination interface

Command Mode

- /exec/configure/if-igp /exec/configure/ppm-ethernet-switch /exec/configure/ppm-port-channel-switch

ipv6 dhcp relay option type cisco

[no] ipv6 dhcp relay option type cisco

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

dhcp

Configure DHCPv6 relay

relay

DHCPv6 relay agent parameters

option

Relay agent option

type

Relay agent option type

cisco

Use Cisco propritery options

Command Mode

- /exec/configure

ipv6 dhcp relay option vpn

[no] ipv6 dhcp relay option vpn

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

dhcp

Configure DHCPv6 relay

relay

DHCPv6 relay agent parameters

option

Insert DHCPv6 relay information in Relay forward

vpn

Enable DHCPv6 relay support across VRFs

Command Mode

- /exec/configure

ipv6 dhcp relay source-interface

ipv6 dhcp relay source-interface <interface-name>

Syntax Description

ipv6

Configure IPv6 features

dhcp

Configure DHCPv6 relay

relay

Configure DHCPv6 relay agent

source-interface

Configure source interface for DHCPv6 relay

interface-name

Source interface

Command Mode

- /exec/configure /exec/configure/if-igp

ipv6 dhcp relay source-interface

[no] ipv6 dhcp relay source-interface

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

dhcp

Configure DHCPv6 relay

relay

Configure DHCPv6 relay agent

source-interface

Configure source interface for DHCPv6 relay

Command Mode

- /exec/configure /exec/configure/if-igp

ipv6 flood unknown ucast

[no] ipv6 flood unknown ucast

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

flood

Enable flood unknown ucast

unknown

Enable flood unknown ucast

ucast

Enable flood unknown ucast

Command Mode

- /exec/configure

ipv6 flow monitor input

[no] ipv6 flow monitor <monitorname> { input | output } [ sampler <samplername> ]

Syntax Description

ipv6

Configure IPv6 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan

ipv6 flow monitor input

[no] ipv6 flow monitor <monitorname> { input | output } [ sampler <samplername> ]

Syntax Description

ipv6

Configure IPv6 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/if-routing /exec/configure/if-mgmt-ether /exec/configure/if-any-tunnel /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

ipv6 flow monitor input

[no] ipv6 flow monitor <monitorname> input [ sampler <samplername> ]

Syntax Description

ipv6

Configure IPv6 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan-config

ipv6 flow monitor input

[no] ipv6 flow monitor <monitorname> { input | output } [ sampler <samplername> ]

Syntax Description

ipv6

Configure IPv6 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/if-vlan-common

ipv6 flow monitor output

ipv6 flow monitor <monitorname> output [ sampler <samplername> ]

Syntax Description

ipv6

Configure IPv6 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan-config

ipv6 flow monitor output

[no] ipv6 flow monitor <monitorname> output [ sampler <samplername> ]

Syntax Description

ipv6

Configure IPv6 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

output

Apply Flow Monitor on output traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/vlan-config

ipv6 forward

ipv6 forward | no ipv6 forward

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

forward

Enable ipv6 forwarding on interface

Command Mode

- /exec/configure/if-vlan /exec/configure/if-vlan-range

ipv6 host

[no] ipv6 host <s0> <ipv6_0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

host

Add an entry to the ip hostname table

s0

Name of Host

Command Mode

- /exec/configure

ipv6 icmp test rfc-4884

ipv6 icmp test rfc-4884 <pkt_size>

Syntax Description

ipv6

Configure IPv6 features

icmp

ICMPv6 commands

test

test command

rfc-4884

RFC

pkt_size

ipv6 pkt size

Command Mode

- /exec/configure/if-igp

ipv6 icmp vip vmac protocol group

[no] ipv6 icmp vip <ipv6-addr> vmac <mac-addr> protocol <prot> group <id>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

icmp

ICMPv6 commands

vip

Virtual IPv6 address

vmac

Virtual MAC address

mac-addr

Layer-2 MAC address

protocol

FHRP protocol

prot

HSRP VRRP GLBP

group

Group id

id

Group id

Command Mode

- /exec/configure/if-igp

ipv6 link-local

[no] ipv6 link-local [ <ipv6-addr> ] | ipv6 link-local <ipv6-addr>

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

link-local

Change format of link-local address

Command Mode

- /exec/configure/if-vlan /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-igp /exec/configure/if-vsan

ipv6 local policy route-map

ipv6 local policy route-map <route-map-name> | no ipv6 local policy route-map [ <route-map-name> | <route-map-name> ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

local

Configure local PBR feature

policy

Configure PBR feature

route-map

Route-map for PBR

route-map-name

Route-map name

route-map-name

(Optional) Route-map name

route-map-name

(Optional) Known route-map name

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 mroute

[no] ipv6 mroute <ipv6-prefix> { { <next-hop> | <nh-prefix> } | <interface> } [ <pref> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

mroute

Configure multicast RPF static route

interface

Interface for interface static multicast routes

pref

(Optional) Route preference

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 multicast last-hop-meter

ipv6 multicast last-hop-meter <kbps> [ <burst-size> ] | no ipv6 multicast last-hop-meter [ <kbps> [ <burst-size> ] ]

Syntax Description

no

Negate a command or set its defaults

ipv6

IPV6 protocol events

multicast

Configure IPV6 multicast global parameters

last-hop-meter

RPF-failed meter

kbps

Rate in kilobits/sec

burst-size

(Optional) Burst size in kilobytes

Command Mode

- /exec/configure

ipv6 multicast notify-interval

ipv6 multicast notify-interval <interval> | no ipv6 multicast notify-interval [ <interval> ]

Syntax Description

no

Negate a command or set its defaults

ipv6

IPV6 protocol events

multicast

Configure IPV6 multicast global parameters

notify-interval

M6RIB notification interval

interval

Timer interval in milliseconds

Command Mode

- /exec/configure

ipv6 multicast rpf-meter

ipv6 multicast rpf-meter { { <kbps> [ <burst-size> ] } | hardware-drop-all } | no ipv6 multicast rpf-meter [ { <kbps> [ <burst-size> ] } | hardware-drop-all ]

Syntax Description

no

Negate a command or set its defaults

ipv6

IPV6 protocol events

multicast

Configure IPV6 multicast global parameters

rpf-meter

RPF-failed meter

kbps

Rate in kilobits/sec

burst-size

(Optional) Burst size in kilobytes

hardware-drop-all

Drop all RPF-failed packets in hardware

Command Mode

- /exec/configure

ipv6 nd cache limit

{ { ipv6 nd cache limit <max> } | { no ipv6 nd cache limit } } [ syslog <rate> ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

cache

ND cache parameters

limit

Limit size of ND adjacencies cache

max

Max no of ND adjacencies configured

syslog

(Optional) Syslog messages

rate

(Optional) Syslogs per second

Command Mode

- /exec/configure

ipv6 nd dad attempts

ipv6 nd dad attempts <attempt> | no ipv6 nd dad attempts

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

dad

Duplicate Address Detection

attempts

Set IPv6 Duplicate Address Detection Transmits

attempt

Number of attempts

Command Mode

- /exec/configure/if-igp

ipv6 nd hop-limit

{ { ipv6 nd hop-limit <hop-limit> } | { no ipv6 nd hop-limit [ <hop-limit> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

hop-limit

Sent in RA messages, tells hosts what hop-limit to use when originating IPv6 packets

hop-limit

Hop limit in IPv6 header

Command Mode

- /exec/configure/if-igp

ipv6 nd limit-incomplete-adjacency

{ { ipv6 nd limit-incomplete-adjacency <count> } | { no ipv6 nd limit-incomplete-adjacency [ <count> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

limit-incomplete-adjacency

Number of incomplete adjacencies

count

Count

Command Mode

- /exec/configure

ipv6 nd limit_threshold_am_queue

{ { ipv6 nd limit_threshold_am_queue <count> } | { no ipv6 nd limit_threshold_am_queue [ <count> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

limit_threshold_am_queue

Threshold AM queue

count

Count

Command Mode

- /exec/configure

ipv6 nd mac-extract

[no] ipv6 nd mac-extract [ exclude nud-phase ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

mac-extract

Extract next hop MAC address embedded in IPV6 address

exclude

(Optional) Exclude

nud-phase

(Optional) during NUD phase

Command Mode

- /exec/configure/if-igp

ipv6 nd managed-config-flag

[no] ipv6 nd managed-config-flag

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

managed-config-flag

Sent in RA messages, tells hosts to use stateful address auto-configuration to obtain address information

Command Mode

- /exec/configure/if-igp

ipv6 nd mtu

{ { ipv6 nd mtu <mtu> } | { no ipv6 nd mtu [ <mtu> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

mtu

Sent in RA messages, tells hosts what MTU to use on this link

mtu

MTU in bytes

Command Mode

- /exec/configure/if-igp

ipv6 nd ns-interval

{ { ipv6 nd ns-interval <interval> [ <retry-count> ] } | { no ipv6 nd ns-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ns-interval

Retransmission interval between sending Neighbor-Solicitation messages

interval

Interval in milliseconds

retry-count

(Optional) NS Retry count

Command Mode

- /exec/configure/if-igp

ipv6 nd off-list timeout

{ ipv6 nd off-list timeout <time> } | { no ipv6 nd off-list timeout }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

Display Neighbor Discovery interface information

off-list

off-list

timeout

Expire time

time

Expire time value in seconds

Command Mode

- /exec/configure

ipv6 nd other-config-flag

[no] ipv6 nd other-config-flag

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

other-config-flag

Sent in RA messages, tells hosts to use stateful auto-configuration to obtain non-address related information

Command Mode

- /exec/configure/if-igp

ipv6 nd prefix

{ { ipv6 nd prefix <prefix> [ { <val-life> | infinite } { <perf-life> | infinite } [ [ no-autoconfig ] [ no-onlink ] [ no-rtr-address ] [ off-link ] ] | no-advertise ] } | { no ipv6 nd prefix <prefix> } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

prefix

IPv6 Prefix to advertise in RA

val-life

(Optional) Valid Lifetime (secs)

infinite

(Optional) Infinite Valid Lifetime

no-advertise

(Optional) Do not advertise prefix

perf-life

(Optional) Preferred Lifetime (secs)

infinite

(Optional) Infinite Preferred Lifetime

no-autoconfig

(Optional) Do not use prefix for autoconfiguration

no-onlink

(Optional) Do not use prefix for onlink determination

no-rtr-address

(Optional) Do not send full router address in prefix advert

off-link

(Optional) Prefix is offlink

Command Mode

- /exec/configure/if-igp

ipv6 nd prefix default

{ { ipv6 nd prefix default [ { <val-life> | infinite } { <perf-life> | infinite } [ [ no-autoconfig ] [ no-onlink ] [ no-rtr-address ] [ off-link ] ] | no-advertise ] } | { no ipv6 nd prefix default } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

prefix

IPv6 Prefix to advertise in RA

default

Specify prefix default parameters

val-life

(Optional) Valid Lifetime (secs)

infinite

(Optional) Infinite Valid Lifetime

no-advertise

(Optional) Do not advertise prefix

perf-life

(Optional) Preferred Lifetime (secs)

infinite

(Optional) Infinite Preferred Lifetime

no-autoconfig

(Optional) Do not use prefix for autoconfiguration

no-onlink

(Optional) Do not use prefix for onlink determination

no-rtr-address

(Optional) Do not send full router address in prefix advert

off-link

(Optional) Prefix is offlink

Command Mode

- /exec/configure/if-igp

ipv6 nd process adjacency statistics

[no] ipv6 nd process adjacency statistics

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

process

Process Adjacency Statistics

adjacency

Adjacency

statistics

Statistics

Command Mode

- /exec/configure

ipv6 nd ra-interval

ipv6 nd ra-interval <interval> [ min <min-interval> ] | no ipv6 nd ra-interval [ <interval> ] [ min <min-interval> ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ra-interval

Interval between sending Router-Advertisement messages

interval

Interval in seconds

min

(Optional) Minimum interval between sending RA messages

min-interval

(Optional) Interval in seconds

Command Mode

- /exec/configure/if-igp

ipv6 nd ra-lifetime

{ { ipv6 nd ra-lifetime <lifetime> } | { no ipv6 nd ra-lifetime [ <lifetime> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ra-lifetime

Sent in RA messages, Router Lifetime of a default router, 0 means this router will not be the default router

lifetime

Lifetime in seconds

Command Mode

- /exec/configure/if-igp

ipv6 nd ra dns search-list sequence

[no] ipv6 nd ra dns search-list <dnssl> [ { <dnssl_life> | infinite } ] sequence <seqno>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

search-list

DNS Search List

dnssl

Configure DNS Search List to advertise in RA

dnssl_life

(Optional) Configure IPv6 DNS Search list life time

infinite

(Optional) Configure IPv6 DNS Search list life time with infinite

sequence

Sequence of Search List

seqno

Sequence number

Command Mode

- /exec/configure/if-igp

ipv6 nd ra dns search-list suppress

[no] ipv6 nd ra dns search-list suppress

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

search-list

DNS Search List

suppress

Disable sending DNSSL in Router-Advertisement messages

Command Mode

- /exec/configure/if-igp

ipv6 nd ra dns server sequence

[no] ipv6 nd ra dns server <ipv6_addr> [ { <rdnss_life> | infinite } ] sequence <seqno>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

server

Domain Name System Server

rdnss_life

(Optional) Configure IPv6 DNS Server life time

infinite

(Optional) Configure IPv6 DNS Server life time with infinite

sequence

Sequence of Server

seqno

Sequence number

Command Mode

- /exec/configure/if-igp

ipv6 nd ra dns server suppress

[no] ipv6 nd ra dns server suppress

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

server

Domain Name System Server

suppress

Disable sending RDNSS in Router-Advertisement messages

Command Mode

- /exec/configure/if-igp

ipv6 nd ra route suppress

[no] ipv6 nd ra route suppress

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

route

Route Information Option in RFC 4191

suppress

Disable sending Route Information Options in RA messages

Command Mode

- /exec/configure/if-igp

ipv6 nd raguard

[no] ipv6 nd raguard

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

Configure IPv6 ND

raguard

Configure RA guard

Command Mode

- /exec/configure/if-switching

ipv6 nd reachable-time

{ { ipv6 nd reachable-time <time> } | { no ipv6 nd reachable-time [ <time> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

reachable-time

Sent in RA messages, advertised time when a node considers a neighbor up after receiving a reachability confirmation

time

Time in milliseconds

Command Mode

- /exec/configure/if-igp

ipv6 nd retrans-timer

{ { ipv6 nd retrans-timer <time> } | { no ipv6 nd retrans-timer [ <time> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

retrans-timer

Sent in RA messages, advertised time between NS messages

time

Time in milliseconds

Command Mode

- /exec/configure/if-igp

ipv6 nd route route-preference High Low Medium infinite

{ { ipv6 nd route <prefix> route-preference { High | Low | Medium } { <lifetime> | infinite } [ { verify-reachability } ] } | { no ipv6 nd route { <prefix> | all } route-preference } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

route

Route Information Option in RFC 4191

route-preference

Route preference value

High

High router preference

Low

Low router preference

Medium

Medium router preference

lifetime

Lifetime (secs)

infinite

Infinite lifetime of prefix

verify-reachability

(Optional) Verify if route is present in Route table

all

Remove all the Router Preference prefixes

Command Mode

- /exec/configure/if-igp

ipv6 nd router-preference High Low Medium

{ { ipv6 nd router-preference { High | Low | Medium } } | { no ipv6 nd router-preference } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

router-preference

Set default router preference value

High

High default router preference

Low

Low default router preference

Medium

Medium default router preference

Command Mode

- /exec/configure/if-igp

ipv6 nd solicit-na accept

{ ipv6 nd solicit-na { { accept [ no-probe | <interval> ] | [ no-accept ] } | { accept1 [ no-probe1 | <interval1> ] | [ no-accept1 ] } } } | { no ipv6 nd solicit-na }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

solicit-na

Solicited Neighbor Advertisemen

accept

Accept Solicit NA without incomplete entry

no-probe

(Optional) Do not probe, create a Reachable Entry

interval

(Optional) Probe Interval in Seconds

no-accept

(Optional) Do not accept Solicit NA without incomplete entry

accept1

Accept Solicit NA without incomplete entry

no-probe1

(Optional) Do not probe, create a Reachable Entry

interval1

(Optional) Probe Interval in Seconds

no-accept1

(Optional) Do not accept Solicit NA without incomplete entry

Command Mode

- /exec/configure

ipv6 nd suppress-ra

[no] ipv6 nd suppress-ra [ mtu ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

ICMPv6 Neighbor Discovery commands

suppress-ra

Disable sending Router-Advertisement messages

mtu

(Optional) Disable sending MTU in Router-Advertisement messages

Command Mode

- /exec/configure/if-igp

ipv6 nd synchronize

[no] ipv6 nd synchronize

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

Display Neighbor Discovery interface information

synchronize

CFS synchronize

Command Mode

- /exec/configure/vpc-domain

ipv6 nd synchronize

ipv6 nd synchronize [ pull | push ]

Syntax Description

ipv6

Configure IPv6 features

nd

Display Neighbor Discovery interface information

synchronize

CFS synchronize

pull

(Optional) Initiate CFS pull request

push

(Optional) Initiate CFS push message

Command Mode

- /exec

ipv6 neighbor

[no] ipv6 neighbor <ipv6-addr> [ <mac-addr> ] | ipv6 neighbor <ipv6-addr> <mac-addr>

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

neighbor

Configure IPv6 address to layer-2 address mapping

mac-addr

(Optional) Layer-2 MAC address

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

ipv6 neighbor allow-static-neighbor-outside-subnet

[no] ipv6 neighbor allow-static-neighbor-outside-subnet

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

neighbor

Configure IPv6 address to layer-2 address mapping

allow-static-neighbor-outside-subnet

Allow static neighbor outside interface subnet

Command Mode

- /exec/configure

ipv6 pim anycast-rp

[no] ipv6 pim anycast-rp <anycast-rp> <rp-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

anycast-rp

Configure an RP in an Anycast-RP set (using PIM6)

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim auto-rp listen

{ ipv6 pim auto-rp { listen | forward } + } | { no ipv6 pim auto-rp [ { listen | forward } + ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

auto-rp

Enable listening or forwarding of Auto-RP messages

listen

Listen to Auto-RP messages

forward

Forward Auto-RP messages

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim auto-rp mapping-agent-policy

{ ipv6 pim auto-rp mapping-agent-policy { <route-map-name> | <rtr_pol_name> } | no ipv6 pim auto-rp mapping-agent-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

mapping-agent-policy

Specify policy for filtering Mapping Agent messages

route-map-name

A route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim auto-rp mapping-agent send-rp-discovery

{ { ipv6 pim { { auto-rp mapping-agent } | send-rp-discovery } <interface> [ scope <ttl> ] } | { no ipv6 pim { { auto-rp mapping-agent } | send-rp-discovery } [ <interface> ] [ scope <ttl> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

auto-rp

Auto-RP protocol RP-distribution configuration

pim

PIM6 global configuration commands

send-rp-discovery

Configures router to send Auto-RP Discovery messages

mapping-agent

Configures router as an Auto-RP RP-mapping agent

interface

IPV6 address of interface for Auto-RP Announce messages

scope

(Optional) Configure the scope of Auto-RP Discovery messages

ttl

(Optional) TTL value for scope

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim auto-rp rp-candidate-policy

{ ipv6 pim auto-rp rp-candidate-policy { <route-map-name> | <rtr_pol_name> } | no ipv6 pim auto-rp rp-candidate-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

rp-candidate-policy

Specify policy for filtering RP candidate messages

route-map-name

A route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim auto-rp rp-candidate send-rp-announce group

{ { ipv6 pim { { auto-rp rp-candidate } | send-rp-announce } <interface> { group-list <prefix> | route-map <route-map-name> } { [ scope <ttl> ] | [ interval <interval> ] | [ bidir ] } + } | { no ipv6 pim { { auto-rp rp-candidate } | send-rp-announce } [ <interface> ] [ group-list <prefix> ] [ route-map <route-map-name> ] { [ scope <ttl> ] | [ interval <interval> ] | [ bidir ] } } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

auto-rp

Auto-RP protocol RP-distribution configuration

send-rp-announce

Configures router to send Auto-RP Announce messages

rp-candidate

Configures router to be an Auto-RP candidate RP

interface

IPV6 address of interface for nnounce messages

group-list

Group range list

route-map

Group range policy for Auto-RP Candidate RP

route-map-name

route-map name

scope

(Optional) Configure the scope of Auto-RP Announce messages

ttl

(Optional) TTL value for scope

interval

(Optional) Auto-RP Announce message transmission interval

interval

(Optional) Interval in seconds

bidir

(Optional) Group range advertised in PIM6 bidirectional mode

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim bidir-rp-limit

[no] ipv6 pim bidir-rp-limit <limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

bidir-rp-limit

Configures maximum Bidir RPs for IPv6 PIM in this VRF

limit

Set limit for Bidir RPs permitted in IPv6 PIM

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim border

[no] ipv6 pim border

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

border

Configures interface to be a boundary of a PIM6 domain

Command Mode

- /exec/configure/if-igp

ipv6 pim bsr-candidate

{ { ipv6 pim [ bsr ] bsr-candidate <interface> [ hash-len <hash-len> ] [ priority <priority> ] } | { no ipv6 pim [ bsr ] bsr-candidate [ <interface> ] [ hash-len <hash-len> ] [ priority <priority> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

bsr

(Optional) Bootstrap protocol RP-distribution configuration

bsr-candidate

Configure router as a Bootstrap Router candidate

interface

Use IPV6 address of interface for Bootstrap messages

hash-len

(Optional) Hash mask length used in Bootstrap messages

hash-len

(Optional) Hash mask length value

priority

(Optional) BSR priority used in Bootstrap messages

priority

(Optional) BSR priority value

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim bsr bsr-policy

{ ipv6 pim bsr bsr-policy { <route-map-name> | <rtr_pol_name> } | no ipv6 pim bsr bsr-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

bsr

Bootstrap protocol RP-distribution configuration

bsr-policy

Specify policy for filtering BSR messages

route-map-name

A route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim bsr listen

{ ipv6 pim bsr { listen | forward } + } | { no ipv6 pim bsr [ { listen | forward } + ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

bsr

Bootstrap protocol RP-distribution configuration

listen

Listen to Bootstrap/Candidate-RP messages

forward

Forward Bootstrap/Candidate-RP messages

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim bsr rp-candidate-policy

{ ipv6 pim bsr rp-candidate-policy { <route-map-name> | <rtr_pol_name> } | no ipv6 pim bsr rp-candidate-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

bsr

Bootstrap protocol RP-distribution configuration

rp-candidate-policy

Specify policy for filtering RP candidate messages

route-map-name

A route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim dr-priority

{ { ipv6 pim dr-priority <priority> } | { no ipv6 pim dr-priority [ <priority> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

dr-priority

Configures priority for PIM6 DR election on interface

priority

Priority value

Command Mode

- /exec/configure/if-igp

ipv6 pim event-history assert-receive

[no] ipv6 pim event-history assert-receive { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

assert-receive

Assert-receive events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history bidir

[no] ipv6 pim event-history bidir { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

bidir

Bidir events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history hello

[no] ipv6 pim event-history hello { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

hello

Hello events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history join-prune-summary

[no] ipv6 pim event-history join-prune-summary { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

join-prune-summary

Join/Prune-Summary events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history join-prune

[no] ipv6 pim event-history join-prune { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

join-prune

Join/Prune events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history null-register

[no] ipv6 pim event-history null-register { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

null-register

Reg events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history packet

[no] ipv6 pim event-history packet { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

packet

Packet events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history rp

[no] ipv6 pim event-history rp { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

rp

RP events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim event-history vrf

[no] ipv6 pim event-history vrf { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

event-history

Configure event-history buffer

vrf

VRF events for PIM6

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 pim flush-routes

[no] ipv6 pim flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

flush-routes

Remove routes when restarting PIM6

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim hello-authentication ah-md5

{ ipv6 pim hello-authentication ah-md5 <auth-key> | no ipv6 pim hello-authentication ah-md5 [ <auth-key> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

hello-authentication

Add AH header option to Hellos

ah-md5

Use MD5 HMAC

auth-key

MD5 authentication key

Command Mode

- /exec/configure/if-igp

ipv6 pim hello-interval

{ { ipv6 pim hello-interval { <interval-min> | <interval-max> } } | { no ipv6 pim hello-interval [ <interval-min> | <interval-max> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

hello-interval

Configures the Hello interval for interface

interval-min

Interval in milliseconds

interval-max

Interval in milliseconds

Command Mode

- /exec/configure/if-igp

ipv6 pim isolate

[no] ipv6 pim isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

isolate

Isolate this router from IPV6 PIM perspective

Command Mode

- /exec/configure

ipv6 pim jp-delay

{ { ipv6 pim jp-delay <delay> } | { no ipv6 pim jp-delay [ <delay> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

jp-delay

Join-Prune message inter-packet delay

delay

Delay value in microseconds

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim jp-policy

{ ipv6 pim jp-policy { <route-map-name> | <rtr_pol_name> } [ in | out ] | no ipv6 pim jp-policy [ <route-map-name> | <rtr_pol_name> ] [ in | out ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

jp-policy

Specify policy for receiving Join-Prune messages

route-map-name

A route-map name

rtr_pol_name

An existing routing-rules policy

in

(Optional) Inbound

out

(Optional) Outbound

Command Mode

- /exec/configure/if-igp

ipv6 pim log-neighbor-changes

[no] ipv6 pim log-neighbor-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

log-neighbor-changes

Log up/down PIM6 neighbor transitions

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim neighbor-policy

{ ipv6 pim neighbor-policy <route-map-name> | no ipv6 pim neighbor-policy [ <route-map-name> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

neighbor-policy

Configures a neighbor policy for filtering adjacencies

route-map-name

A route-map name

Command Mode

- /exec/configure/if-igp

ipv6 pim passive

[no] ipv6 pim passive

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

passive

Interface in passive mode. No send/recv

Command Mode

- /exec/configure/if-igp

ipv6 pim register-policy

{ ipv6 pim register-policy { <route-map-name> | <rtr_pol_name> } | no ipv6 pim register-policy [ <route-map-name> | <rtr_pol_name> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

register-policy

Specify policy for receiving Register messages

route-map-name

A route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim register-rate-limit

{ { ipv6 pim register-rate-limit <rate> } | { no ipv6 pim register-rate-limit [ <rate> ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

register-rate-limit

Rate limit for PIM data registers

rate

Packets per second

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim rp-address

{ { ipv6 pim rp-address <rp-address> [ group-list <prefix> | route-map <route-map-name> | prefix-list <prefix-list-name> ] [ bidir ] [ override ] } | { no ipv6 pim rp-address <rp-address> [ group-list <prefix> | route-map <route-map-name> | prefix-list <prefix-list-name> ] [ bidir ] [ override ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

rp-address

Configure static RP for group range

group-list

(Optional) Group range for static RP

route-map

(Optional) Route Map policy for static RP

route-map-name

(Optional) route-map name

prefix-list

(Optional) Prefix List policy for static RP

prefix-list-name

(Optional) prefix-list name

bidir

(Optional) Group range is treated in PIM6 bidirectional mode

override

(Optional) Overrides the dynamically learnt RPs

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim rp-candidate group

{ { ipv6 pim [ bsr ] rp-candidate <interface> { group-list <prefix> | route-map <route-map-name> } [ priority <priority> ] [ interval <interval> ] [ bidir ] } | { no ipv6 pim [ bsr ] rp-candidate [ <interface> ] [ group-list <prefix> ] [ route-map <route-map-name> ] [ priority <priority> ] [ interval <interval> ] [ bidir ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

bsr

(Optional) Bootstrap protocol RP-distribution configuration

rp-candidate

Configure router as a Rendezvous Point (RP) candidate

interface

IPV6 address of interface for Candidate-RP messages

group-list

Group range list

route-map

Group range policy for Candidate RP

route-map-name

route-map name

priority

(Optional) RP priority used in Candidate-RP messages

priority

(Optional) RP priority value

interval

(Optional) Bootstrap message transmission interval

interval

(Optional) Interval in seconds

bidir

(Optional) Group range advertised in PIM6 bidirectional mode

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim sparse-mode

ipv6 pim sparse-mode | no ipv6 pim [ sparse-mode ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 interface configuration commands

sparse-mode

Configures sparse-mode PIMv6 on interface

Command Mode

- /exec/configure/if-igp

ipv6 pim ssm

{ ipv6 pim ssm { { range { <group> + | none } } | { route-map <route-map-name> } } | no ipv6 pim ssm { { range { <group> + | none } } | { route-map <route-map-name> } } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

ssm

Source Specific Multicast (SSM) groups

range

Configure explicit group ranges

none

Remove all SSM group ranges

route-map

Group range policy for SSM range

route-map-name

A route-map name

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim state-limit

{ { ipv6 pim state-limit <max-states> [ reserved <route-map-name> <max-reserved> ] } | { no ipv6 pim state-limit [ <max-states> [ reserved <route-map-name> <max-reserved> ] ] } }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

state-limit

Configures State limit

max-states

Maximum (*,G)/(S,G) entries allowed in this VRF

reserved

(Optional) Configures Reserved limit

route-map-name

(Optional) Route-map name

max-reserved

(Optional) Maximum reserved (*,G)/(S,G) entries allowed in this VRF

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 pim use-shared-tree-only spt-threshold infinity group-list

{ ipv6 pim { use-shared-tree-only | spt-threshold infinity } group-list <route-map-name> } | { no ipv6 pim { use-shared-tree-only | spt-threshold infinity } [ group-list <route-map-name> ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

pim

PIM6 global configuration commands

use-shared-tree-only

Use (*,G) only state, no source state is created

spt-threshold

Source-tree switching threshold

infinity

Never switch to source-tree

group-list

Specify group ranges through policy

route-map-name

Route-map name

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 policy route-map

ipv6 policy route-map <route-map-name> | no ipv6 policy route-map [ <route-map-name> | <route-map-name> ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

policy

Configure PBR feature

route-map

Route-map for PBR

route-map-name

Route-map name

route-map-name

(Optional) Route-map name

route-map-name

(Optional) Known route-map name

Command Mode

- /exec/configure/if-igp

ipv6 port traffic-filter

[no] ipv6 port traffic-filter <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

port

Port policy

traffic-filter

Specify access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/if-set-acl-l2

ipv6 prefix-list description

{ ipv6 prefix-list <ipv6-pfl-name> description <line> } | { no ipv6 prefix-list <ipv6-pfl-name> description }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

prefix-list

Build a prefix list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

description

Description of the IPv6 prefix list

line

IPv6 prefix-list description string

Command Mode

- /exec/configure

ipv6 prefix-list permit

{ ipv6 prefix-list <ipv6-pfl-name> { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } } | { no ipv6 prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } [ { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

prefix-list

Build a prefix list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

permit

Specify routes to forward

deny

Specify routes to reject

eq

(Optional) Exact prefix length to be matched

equal

(Optional) Exact prefix length

ge

(Optional) Minimum prefix length to be matched

greater

(Optional) Minimum prefix length

le

(Optional) Maximum prefix length to be matched

lesser

(Optional) Maximum prefix length

Command Mode

- /exec/configure

ipv6 prefix-list seq permit

{ ipv6 prefix-list <ipv6-pfl-name> seq <seq> { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } } | { no ipv6 prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } seq <seq> [ { permit | deny } <prefix> { [ eq <equal> ] | [ ge <greater> ] [ le <lesser> ] } ] }

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

prefix-list

Build a prefix list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

seq

Sequence number of an entry

seq

Sequence number

permit

Specify routes to forward

deny

Specify routes to reject

eq

(Optional) Exact prefix length to be matched

equal

(Optional) Exact prefix length

ge

(Optional) Minimum prefix length to be matched

greater

(Optional) Minimum prefix length

le

(Optional) Maximum prefix length to be matched

lesser

(Optional) Maximum prefix length

Command Mode

- /exec/configure

ipv6 queue-packets-limit

[no] ipv6 queue-packets-limit [ <limit> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

queue-packets-limit

Maximum number of queue packets for unresolved NDS

limit

(Optional) Unresolved ND queue packet limit

Command Mode

- /exec/configure

ipv6 queue-packets

[no] ipv6 queue-packets

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

queue-packets

Queue 1 packet when triggered NS is sent

Command Mode

- /exec/configure

ipv6 redirects

ipv6 [ nd ] redirects | no ipv6 [ nd ] redirects

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

nd

(Optional) ICMPv6 Neighbor Discovery commands

redirects

Enable sending ICMPv6 Redirect messages

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-config

ipv6 route

[no] ipv6 route <ipv6-prefix> { <interface> | { { <link-local> <interface-link-local> } | { <pin-interface> <next-hop> } | { <next-hop> | <nh-prefix> } | { <vlan-interface> } } [ vrf { <vrf-name> | <vrf-known-name> } ] } [ track <object-num> ] [ name <rt-name> ] [ <pref> | tag <tag-value> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

route

Configure IPv6 unicast static route

interface

Interface for interface static routes

vlan-interface

vlan interface

name

(Optional) Specify name of the next hop

rt-name

(Optional) Name of next hop

pin-interface

Pin interface

interface-link-local

Interface for interface static routes

track

(Optional) Specify the Object to be Tracked

object-num

(Optional) Track Object Number

vrf

(Optional) VRF for next-hop if different from this vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

pref

(Optional) Route preference

tag

(Optional) Supply tag value with static route

tag-value

(Optional) 32-bit value for tag

Command Mode

- /exec/configure /exec/configure/vrf

ipv6 route static bfd

[no] ipv6 route static bfd <pin-interface> <next-hop>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IP features

route

Route information

static

Static route based configuration

bfd

Enable bfd detection on static route

pin-interface

Interface on which bfd has to be enabled

Command Mode

- /exec/configure /exec/configure/config-mgmt /exec/configure/vrf

ipv6 router isis

[no] ipv6 router isis <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

router

Enable a routing process

isis

Intermediate System to Intermediate System (IS-IS)

tag

Process tag

Command Mode

- /exec/configure/if-igp

ipv6 router ospfv3 area

[no] ipv6 router ospfv3 <tag> area { <area-id-ip> | <area-id-int> } [ secondaries none ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

router

Enable a routing process

ospfv3

OSPFv3 configuration commands

tag

Process tag

area

Area associated with interface

area-id-ip

OSPFv3 area ID in IP address format

area-id-int

OSPFv3 area ID as a decimal format

secondaries

(Optional) Do not include secondary IPv6 addresses

none

(Optional) Do not include secondary IPv6 addresses

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ipv6 router ospfv3 multi-area

[no] ipv6 router ospfv3 [ <tag> ] multi-area <area-id-ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

router

Enable a routing process

ospfv3

OSPFv3 configuration commands

tag

(Optional) Process tag

multi-area

Multi-Area associated with interface

area-id-ip

Area Id as an integer or ip address

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ipv6 routing event-history size

[no] ipv6 routing event-history { am | cli | detail | errors | general | ha | lfe | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary } size { <size_in_text> | <size_in_bytes> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

event-history

Configure routing event log

am

AM

cli

CLI

detail

Detail

errors

Errors

general

General

ha

HA

lfe

LFE

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

size

Size of buffer

size_in_text

Buffer size

size_in_bytes

Enter an integer value for the event history buffer

Command Mode

- /exec/configure

ipv6 routing multicast event-history cli

[no] ipv6 routing multicast event-history cli { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

cli

CLI events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 routing multicast event-history mfdm-debugs

[no] ipv6 routing multicast event-history mfdm-debugs { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

mfdm-debugs

MFDM events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 routing multicast event-history mfdm-events

[no] ipv6 routing multicast event-history mfdm-events { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

mfdm-events

Non-periodic MFDM events in MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 routing multicast event-history mfdm-stats

[no] ipv6 routing multicast event-history mfdm-stats { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

mfdm-stats

MFDM-stats events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 routing multicast event-history rib-summary

[no] ipv6 routing multicast event-history rib-summary { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

event-history

Configure event-history buffers

rib-summary

RIB events for MRIB-summary

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 routing multicast event-history rib

[no] ipv6 routing multicast event-history rib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

rib

RIB events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 routing multicast event-history vrf

[no] ipv6 routing multicast event-history vrf { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

event-history

Configure event history buffers

vrf

VRF events for MRIB

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

ipv6 routing multicast holddown

ipv6 routing multicast holddown { <route-holddown-sec> | <none> } | no ipv6 routing multicast holddown [ <route-holddown-sec> | <none> ]

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

holddown

Initial holddown period

route-holddown-sec

Delay in seconds

none

Disable holddown

Command Mode

- /exec/configure

ipv6 routing multicast software-replication

[no] ipv6 routing multicast software-replication

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

routing

Routing information

multicast

Configure multicast

software-replication

Enable software replication of PIM ASM leak packets

Command Mode

- /exec/configure

ipv6 source-route

[no] ipv6 source-route [ rh0 ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

source-route

Process IPv6 Routing Header

rh0

(Optional) Process IPv6 Routing Header - Type 0 (RH0)

Command Mode

- /exec/configure

ipv6 switch-packets

[no] ipv6 switch-packets [ lla ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

switch-packets

Switch ND packets received on core ports

lla

(Optional) Switch ND packets targeted to Link local address on core ports

Command Mode

- /exec/configure

ipv6 traffic-filter

[no] ipv6 traffic-filter <name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

traffic-filter

Specify access control for packets

name

List name

inout

Traffic direction

Command Mode

- /exec/configure/if-set-acl-l3

ipv6 unreachables

[no] ipv6 [ icmp ] unreachables

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

icmp

(Optional) ICMPv6 commands

unreachables

Enable sending ICMPv6 Unreachable messages (port-unreachables are always rate-limit enabled)

Command Mode

- /exec/configure/if-igp

ipv6 verify unicast source reachable-via rx

[no] ipv6 verify unicast source reachable-via { rx | any }

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

verify

Unicast Reverse Path Forwarding

unicast

Unicast Reverse Path Forwarding

source

Validation of source address

reachable-via

Specify reachability check to apply to the source address

rx

Source is reachable via interface on which packet was received

any

Source is reachable via any interface

Command Mode

- /exec/configure/if-igp

ipv6 vip

[no] ipv6 vip <ipv6-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

ipv6

Configure IPv6 features

vip

Virtual IPv6 address

Command Mode

- /exec/configure/if-igp

is-type

is-type <is-type> | no is-type [ <is-type> ]

Syntax Description

no

Negate a command or set its defaults

is-type

IS type for this IS-IS process

is-type

IS-IS IS type

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

ishow cli find nodes

ishow cli find nodes [ <component> ] [ recurse ]

Syntax Description

ishow

Show internal information

cli

Show CLI information

find

nodes

display

component

(Optional) display

recurse

(Optional) go

Command Mode

- /exec

ishow cli modes

ishow cli modes

Syntax Description

ishow

Show internal information

cli

Show CLI information

modes

show

Command Mode

- /exec

ishow cli nodes

ishow cli nodes [ <mode> ]

Syntax Description

ishow

Show internal information

cli

Show CLI information

nodes

show

mode

(Optional) mode

Command Mode

- /exec

ishow cli paths

ishow cli paths <component> [ <type> ]

Syntax Description

ishow

Show internal information

cli

Show CLI information

paths

show

component

component

type

(Optional)

Command Mode

- /exec

ishow cli tags

ishow cli tags

Syntax Description

ishow

Show internal information

cli

Show CLI information

tags

Command Mode

- /exec

ishow core backtrace

ishow core <pid> backtrace

Syntax Description

ishow

Show internal information

core

display info from core file

pid

PID from 'show cores

backtrace

display backtrace -- needs enough space to unzip the core file!

Command Mode

- /exec

isis authentication-check

[no] isis authentication-check

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

authentication-check

Check authentication on received hellos

Command Mode

- /exec/configure/if-p2p

isis authentication-check level-1

[no] isis authentication-check level-1

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

authentication-check

Check authentication on received hellos

level-1

Configure authentication check for level-1 IIHs

Command Mode

- /exec/configure/if-ma

isis authentication-check level-2

[no] isis authentication-check level-2

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

authentication-check

Check authentication on received hellos

level-2

Configure authentication check for level-2 IIHs

Command Mode

- /exec/configure/if-ma

isis authentication-type cleartext

{ isis authentication-type { cleartext | md5 } | no isis authentication-type [ { cleartext | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

authentication-type

Set hello authentication type

cleartext

Cleartext

md5

HMAC-MD5

Command Mode

- /exec/configure/if-p2p

isis authentication-type cleartext

{ isis authentication-type { cleartext | md5 } <level> | no isis authentication-type [ { cleartext | md5 } ] <level> }

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

authentication-type

Set hello authentication type

cleartext

Cleartext

md5

HMAC-MD5

level

IS-IS level

Command Mode

- /exec/configure/if-ma

isis authentication key-chain

{ isis authentication key-chain <auth-keychain> <level> | no isis authentication key-chain [ <auth-keychain> ] <level> }

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

authentication

Set hello authentication keychain

key-chain

Set hello authentication keychain

auth-keychain

authentication keychain

level

IS-IS level

Command Mode

- /exec/configure/if-ma

isis authentication key-chain

{ isis authentication key-chain <auth-keychain> | no isis authentication key-chain [ <auth-keychain> ] }

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

authentication

Set hello authentication keychain

key-chain

Set hello authentication keychain

auth-keychain

authentication keychain

Command Mode

- /exec/configure/if-p2p

isis bfd

[no] isis bfd [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

bfd

Interface BFD configuration

disable

(Optional) Disable BFD on interface

Command Mode

- /exec/configure/if-igp

isis circuit-type

isis circuit-type <circuit-type> | no isis circuit-type [ <circuit-type> ]

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

circuit-type

Configure circuit type for interface

circuit-type

IS-IS circuit type

Command Mode

- /exec/configure/if-igp

isis csnp-interval level

[no] isis csnp-interval <sec> { level-1 | level-2 }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

csnp-interval

Set CSNP interval in seconds

sec

CSNP interval value

level-1

Specify interval for level-1 CSNPs

level-2

Specify interval for level-2 CSNPs

Command Mode

- /exec/configure/if-igp

isis event-history adjacency

[no] isis event-history adjacency { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

adjacency

Adjacency events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history cli

[no] isis event-history cli { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

cli

CLI events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history csnp

[no] isis event-history csnp { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

csnp

CSNP events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history dis

[no] isis event-history dis { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

dis

Dis events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history events

[no] isis event-history events { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

events

Events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history graceful

[no] isis event-history graceful { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

graceful

Graceful Restart events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history ha

[no] isis event-history ha { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

ha

HA events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history iih

[no] isis event-history iih { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

iih

IIH events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history lsp-flood

[no] isis event-history lsp-flood { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

lsp-flood

LSP-flood events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history lsp-gen

[no] isis event-history lsp-gen { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

lsp-gen

LSP-Gen events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history mtr

[no] isis event-history mtr { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

mtr

MTR events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history psnp

[no] isis event-history psnp { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

psnp

PSNP events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history redist

[no] isis event-history redist { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

redist

Redist events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history spf-leaf

[no] isis event-history spf-leaf { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

spf-leaf

Shortest path first events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history spf-tree

[no] isis event-history spf-tree { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

spf-tree

SPF-Tree events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history tlv

[no] isis event-history tlv { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

tlv

TLV events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis event-history urib

[no] isis event-history urib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

Event-history buffers for IS-IS

event-history

Configure event-history buffers

urib

URIB events for IS-IS

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

isis hello-interval

[no] isis hello-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

hello-interval

Set Hello interval in seconds

sec

Hello interval value

Command Mode

- /exec/configure/if-p2p

isis hello-interval level

[no] isis hello-interval <sec> { level-1 | level-2 }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

hello-interval

Set Hello interval in seconds

sec

Hello interval value

level-1

Specify hello-interval for level-1 IIHs

level-2

Specify hello-interval for level-2 IIHs

Command Mode

- /exec/configure/if-ma

isis hello-multiplier

[no] isis hello-multiplier <multi>

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

hello-multiplier

Set multiplier for Hello holding time

multi

Hello multiplier value

Command Mode

- /exec/configure/if-p2p

isis hello-multiplier level

[no] isis hello-multiplier <multi> { level-1 | level-2 }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

hello-multiplier

Set multiplier for Hello holding time

multi

Hello multiplier value

level-1

Specify hello multiplier for level-1 IIHs

level-2

Specify hello multiplier for level-2 IIHs

Command Mode

- /exec/configure/if-ma

isis hello-padding

{ isis hello-padding | no isis hello-padding [ always ] }

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

hello-padding

Pad IS-IS hello PDUs to full MTU

always

(Optional) Pad every hello

Command Mode

- /exec/configure/if-igp

isis hello-padding always

isis hello-padding always

Syntax Description

isis

IS-IS configuration commands

hello-padding

Pad IS-IS hello PDUs to full MTU

always

Pad every hello

Command Mode

- /exec/configure/if-igp

isis ipv6 bfd

[no] isis ipv6 bfd [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

ipv6

Enable BFD for ipv6

bfd

Interface BFD configuration

disable

(Optional) Disable BFD on interface

Command Mode

- /exec/configure/if-igp

isis ipv6 metric

[no] isis ipv6 metric <metric> <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

metric

Configure metric for IPV6 topology

ipv6

Configure metric for IPV6 topology

metric

Default metric

level

IS-IS level

Command Mode

- /exec/configure/if-igp /exec/configure/router-isis/router-isis-af-ipv6

isis lsp-interval

[no] isis lsp-interval <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

lsp-interval

Set LSP transmission interval

msec

LSP transmission interval (milliseconds)

Command Mode

- /exec/configure/if-igp

isis mesh-group

{ isis mesh-group { blocked | <mesh-id> } | no isis mesh-group [ { blocked | <mesh-id> } ] }

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

mesh-group

Set IS-IS mesh group

mesh-id

Mesh group number

blocked

Block LSPs on this interface

Command Mode

- /exec/configure/if-igp

isis metric

[no] isis metric <metric> <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

metric

Configure the metric for interface

metric

Default metric

level

IS-IS level

Command Mode

- /exec/configure/if-igp /exec/configure/if-mpls-tunnel

isis mtu-check

[no] isis mtu-check

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

mtu-check

Check mtu on received hellos, if its padded

Command Mode

- /exec/configure/if-p2p

isis mtu-check level

[no] isis mtu-check { level-1 | level-2 }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

mtu-check

Check mtu on received hellos, if its padded

level-1

Configure mtu-check for level-1

level-2

Configure mtu-check for level-2

Command Mode

- /exec/configure/if-ma

isis network point-to-point

[no] isis network point-to-point

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

network

Change interface medium to p2p

point-to-point

Change interface medium to p2p

Command Mode

- /exec/configure/if-igp /exec/configure/if-mpls-tunnel

isis passive-interface

isis passive-interface <level> | no isis passive-interface <level> | default isis passive-interface [ <level_obsolete> ]

Syntax Description

no

Negate a command or set its defaults

isis

IS-IS configuration commands

passive-interface

Suppress IS-IS PDU

default

Undo a command

level

Level to suppress

level_obsolete

(Optional) Level to suppress

Command Mode

- /exec/configure/if-igp

isis priority level

[no] isis priority <priority> { level-1 | level-2 }

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

priority

Set priority for DIS election

priority

Priority value

level-1

Specify priority for level-1 routing

level-2

Specify priority for level-2 routing

Command Mode

- /exec/configure/if-ma

isis retransmit-interval

[no] isis retransmit-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

retransmit-interval

Set per-LSP retransmission interval

sec

Interval between retransmissions of the same LSP (seconds)

Command Mode

- /exec/configure/if-p2p

isis retransmit-throttle-interval

[no] isis retransmit-throttle-interval <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

retransmit-throttle-interval

Set interface LSP retransmission interval

msec

Delay between retransmitted LSPs (milliseconds)

Command Mode

- /exec/configure/if-p2p

isis shutdown

[no] isis shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

isis

IS-IS configuration commands

shutdown

Graceful shutdown IS-IS functionality on the interface

Command Mode

- /exec/configure/if-igp

isolate

[no] isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

isolate

Isolate this router from RIP perspective

Command Mode

- /exec/configure/router-rip

isolate

[no] isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

isolate

Isolate this router from OSPF perspective

Command Mode

- /exec/configure/router-ospf

isolate

[no] isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

isolate

Isolate router, ISIS perspective (set overload)

Command Mode

- /exec/configure/router-isis

isolate

[no] isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

isolate

Isolate this router from OSPFV3 perspective

Command Mode

- /exec/configure/router-ospf3

isolate

[no] isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

isolate

Isolate this router from EIGRP perspective

Command Mode

- /exec/configure/router-eigrp

isolate

[no] isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

isolate

Isolate this router from BGP perspective

Command Mode

- /exec/configure/router-bgp

isolate

[no] isolate

Syntax Description

no

(Optional) Negate a command or set its defaults

isolate

Isolate fabric spine (set overload)

Command Mode

- /exec/configure/l2mp-isis

itd

{ itd <service-name> } | { no itd <service-name> }

Syntax Description

no

Negate a command or set its defaults

itd

ITD service

service-name

ITD service-name

Command Mode

- /exec/configure

itd

{ itd <service-name> } | { no itd <service-name> }

Syntax Description

no

Negate a command or set its defaults

itd

ITD service

service-name

ITD service-name

Command Mode

- /exec/configure

itd device-group

{ itd device-group <svc-name> } | { no itd device-group <svc-name> }

Syntax Description

no

Negate a command or set its defaults

itd

ITD service

device-group

ITD device group

svc-name

service-name

Command Mode

- /exec/configure

itd device-group

{ itd device-group <svc-name> } | { no itd device-group <svc-name> }

Syntax Description

no

Negate a command or set its defaults

itd

ITD service

device-group

ITD device group

svc-name

service-name

Command Mode

- /exec/configure

itd session access-list refresh

itd session access-list <acl-name> refresh

Syntax Description

itd

ITD service

session

ITD session

access-list

ITD access-list

acl-name

acl-name

refresh

refresh

Command Mode

- /exec/configure

itd session device-group

{ itd session device-group <svc-name> } | { no itd session device-group <svc-name> }

Syntax Description

no

Negate a command or set its defaults

itd

ITD service

session

ITD session

device-group

ITD device group

svc-name

service-name

Command Mode

- /exec/configure

itd statistics

{ itd statistics <service-name> } | { no itd statistics <service-name> }

Syntax Description

no

Negate a command or set its defaults

itd

ITD service

statistics

ITD statistics

service-name

ITD service-name

Command Mode

- /exec/configure

itd statistics

{ itd statistics <service-name> } | { no itd statistics <service-name> }

Syntax Description

no

Negate a command or set its defaults

itd

ITD service

statistics

ITD statistics

service-name

ITD service-name

Command Mode

- /exec/configure

Chapter 11. J Commands

- job name

- json-pretty

- json

- json

job name

[no] job name <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

job

Assign a job to the schedule

name

Assign a job to the schedule

s0

Specify the job name

Command Mode

- /exec/configure/schedule

json-pretty

| json-pretty

Syntax Description

|

Pipe command output to filter

json-pretty

output in json pretty print format

Command Mode

- /output

json

| json

Syntax Description

|

Pipe command output to filter

json

output in json format

Command Mode

- /output

json

| json

Syntax Description

|

Pipe command output to filter

json

output in json format

Command Mode

- /output

Chapter 12. K Commands

- key-chain macsec-psk no-show

- key-octet-string 7 cryptographic-algorithm AES_128_CMAC

- key-octet-string 7 cryptographic-algorithm AES_256_CMAC

- key-octet-string cryptographic-algorithm AES_128_CMAC

- key-octet-string cryptographic-algorithm AES_256_CMAC

- key-server-priority

- key-string

- key-string 7

- key

- key

- key chain

- key chain macsec

- key config-key hex

- kill-everyone

- kill background

key-chain macsec-psk no-show

[no] key-chain macsec-psk no-show

Syntax Description

no

(Optional) Negate a command or set its defaults

key-chain

Keychain Management

macsec-psk

Macsec Pre-shared key

no-show

do not show

Command Mode

- /exec/configure

key-octet-string 7 cryptographic-algorithm AES_128_CMAC

{ key-octet-string 7 <keystring> cryptographic-algorithm AES_128_CMAC }

Syntax Description

key-octet-string

Set key octet string

7

Encryption Type - Proprietary

keystring

key octet string

cryptographic-algorithm

Select CMAC algorithm for authentication

AES_128_CMAC

cryptographic-algorithm AES-128-CMAC

Command Mode

- /exec/configure/macseckeychain-key

key-octet-string 7 cryptographic-algorithm AES_256_CMAC

{ key-octet-string 7 <keystring> cryptographic-algorithm AES_256_CMAC }

Syntax Description

key-octet-string

Set key octet string

7

Encryption Type - Proprietary

keystring

key octet string

cryptographic-algorithm

Select CMAC algorithm for authentication

AES_256_CMAC

cryptographic-algorithm AES-256-CMAC

Command Mode

- /exec/configure/macseckeychain-key

key-octet-string cryptographic-algorithm AES_128_CMAC

{ key-octet-string [ 0 ] <keystring> cryptographic-algorithm AES_128_CMAC | no key-octet-string [ 0 ] <keystring> cryptographic-algorithm AES_128_CMAC }

Syntax Description

no

Negate a command or set its defaults

key-octet-string

Set key octet string

0

(Optional) Encryption Type - No Encryption(default)

keystring

key octet string

cryptographic-algorithm

Select CMAC algorithm for authentication

AES_128_CMAC

cryptographic-algorithm AES-128-CMAC

Command Mode

- /exec/configure/macseckeychain-key

key-octet-string cryptographic-algorithm AES_256_CMAC

{ key-octet-string [ 0 ] <keystring> cryptographic-algorithm AES_256_CMAC | no key-octet-string [ 0 ] <keystring> cryptographic-algorithm AES_256_CMAC }

Syntax Description

no

Negate a command or set its defaults

key-octet-string

Set key octet string

0

(Optional) Encryption Type - No Encryption(default)

keystring

key octet string

cryptographic-algorithm

Select CMAC algorithm for authentication

AES_256_CMAC

cryptographic-algorithm AES-256-CMAC

Command Mode

- /exec/configure/macseckeychain-key

key-server-priority

[no] key-server-priority <pri>

Syntax Description

key-server-priority

Configure Key-Server priority

pri

key-server priority value

Command Mode

- /exec/configure/macsec-policy

key-string

{ key-string [ 0 ] <keystring> | no key-string }

Syntax Description

no

Negate a command or set its defaults

key-string

Set key string

0

(Optional) Encryption Type - No Encryption(default)

keystring

key string

Command Mode

- /exec/configure/keychain-key

key-string 7

{ key-string 7 <keystring> }

Syntax Description

key-string

Set key string

7

Encryption Type - Proprietary

keystring

key string

Command Mode

- /exec/configure/keychain-key

key

[no] key <keyid>

Syntax Description

no

(Optional) Negate a command or set its defaults

key

Configure a key

keyid

Key identifier

Command Mode

- /exec/configure/keychain

key

[no] key <macsec_keyid>

Syntax Description

no

(Optional) Negate a command or set its defaults

key

Configure a macsec key

macsec_keyid

MACsec Key identifier ranging from 1 octet to 32

Command Mode

- /exec/configure/macseckeychain

key chain

[no] key chain <keychain>

Syntax Description

no

(Optional) Negate a command or set its defaults

key

Key Management

chain

Keychain Management

keychain

key-chain name

Command Mode

- /exec/configure

key chain macsec

[no] key chain <keychain> macsec

Syntax Description

no

(Optional) Negate a command or set its defaults

key

Key Management

chain

Keychain Management

keychain

macsec key-chain name

macsec

Macsec Keychain

Command Mode

- /exec/configure

key config-key hex

[no] key config-key { hex | ascii } [ <master-key> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

key

Encryption key for strong encryption

config-key

Master-key for strong encryption of secrets in config

hex

Key followed should be in hex format

ascii

Key followed should be in ascii format

master-key

(Optional) Enter the Master-key

Command Mode

- /exec

kill-everyone

[no] [ eigrp ] kill-everyone

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

kill-everyone

Kill all adjacencies on SIA

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

kill background

kill background <pid>

Syntax Description

kill

terminate processes

background

kill background processes (started with 'source background <file>' command)

pid

background script to terminate, by process-id or just a regex matching any line from 'show background' command

Command Mode

- /exec

Chapter 13. L Commands

- l2 mfwd mroute add

- l2rib dup-host-mac-detection

- l2rib dup-host-mac-recovery

- l2rib event-history size

- l3vm event-history

- label-allocation-mode per-vrf

- label allocate global

- lacp fast-select-hot-standby

- lacp graceful-convergence

- lacp max-bundle

- lacp min-links

- lacp mode delay

- lacp port-priority

- lacp rapid-transition

- lacp rate

- lacp rate

- lacp suspend-individual

- lacp system-priority

- lacp vpc-convergence

- last

- layer-2 multicast lookup mac

- layer-2 multicast lookup mac

- layer-2 multicast lookup mac

- layer2-switched flow monitor input

- layer3 peer-router

- layer3 peer-router syslog

- ldap-search-map

- ldap-search-map

- ldap-server deadtime

- ldap-server host

- ldap-server host test rootDN

- ldap-server port

- ldap-server timeout

- ldap search-map

- less

- license expiry check_interval

- license grace-period

- license grace-period days

- license grace-period seconds

- license grace period

- license reserve count package module

- limit-resource m4route-mem maximum equal-to-min

- limit-resource m6route-mem maximum

- limit-resource module-type

- limit-resource monitor-session-erspan-dst minimum maximum equal-to-min

- limit-resource monitor-session-inband-src minimum maximum equal-to-min

- limit-resource monitor-session minimum maximum equal-to-min

- limit-resource port-channel minimum maximum

- limit-resource u4route-mem maximum equal-to-min

- limit-resource u6route-mem maximum equal-to-min

- limit-resource vlan minimum maximum equal-to-min

- limit-resource vrf minimum maximum equal-to-min

- line console

- line console

- line vty

- line vty

- link-management timers bandwidth

- link debounce

- lisp

- lisp ddt

- lisp ddt authoritative-prefix eid-prefix

- lisp ddt delegate eid-prefix

- lisp ddt inherit-referrals

- lisp ddt map-server-peer eid-prefix

- lisp ddt private-key

- lisp ddt root

- lisp dont-prime-map-cache

- lisp dynamic-eid

- lisp dynamic-eid

- lisp explicit-locator-path

- lisp explicit-locator-path

- lisp extended-subnet-mode

- lisp geo-coordinates

- lisp ignore-smr

- lisp instance-id

- lisp loc-reach-algorithm

- lisp merge-registrations site-id

- lisp mobility

- lisp mobility test-liveness

- lisp mtu

- lisp security

- lisp site

- lisp site

- lisp smr-local-locators

- lisp smr-locators

- lisp to

- list

- list

- listobject-boolean not

- listobject-weight weight threshold-weight

- listobject

- lldp

- lldp eee rx_wake_time

- lldp receive

- lldp tlv-select eee

- lldp tlv-select management-address v4

- lldp tlv-set management-address

- lldp tlv-set management-address ipv6

- lldp tlv-set vlan

- lldp transmit

- load-balance

- load-balance

- load-balancing

- load-interval

- load-interval

- load-interval counter

- load-interval counter

- load

- load

- load

- local-as

- local-as

- local-label prefix

- local-label prefix

- locator-led

- locator-led fex

- lockdown

- log-adjacency-changes

- log-adjacency-changes

- log-adjacency-changes

- log-adjacency-changes

- log-adjacency-changes

- log-adjacency-changes

- log-event-type

- log-neighbor-changes

- log-neighbor-changes

- log-neighbor-warnings

- logging

- logging

- logging abort

- logging clear_console

- logging console

- logging debug

- logging distribute

- logging drop threshold

- logging drop threshold

- logging event link enable

- logging event port link-status

- logging event port link-status

- logging event port link-status

- logging event port link-status default

- logging event port trunk-status

- logging event port trunk-status

- logging event port trunk-status default

- logging flush

- logging invalid-username

- logging ip access-list cache

- logging ip access-list cache entries

- logging ip access-list detailed

- logging ip access-list include sgt

- logging level

- logging level

- logging level

- logging level

- logging level

- logging level

- logging level

- logging level

- logging level aaa

- logging level acllog

- logging level aclmgr

- logging level adbm

- logging level adjmgr

- logging level all

- logging level amt

- logging level arp

- logging level ascii-cfg

- logging level bfd

- logging level bgp

- logging level bloggerd

- logging level bootvar

- logging level callhome

- logging level capability

- logging level cdp

- logging level cert

- logging level cfs

- logging level clis

- logging level clk_mgr

- logging level confcheck

- logging level copp

- logging level core

- logging level cts

- logging level device_test

- logging level dhclient

- logging level dhcp_snoop

- logging level diagclient

- logging level diagmgr

- logging level dot1x

- logging level eigrp

- logging level eltm

- logging level ethdstats

- logging level ethpm

- logging level ethpm link

- logging level evb

- logging level evmc

- logging level evmed

- logging level evms

- logging level fabric forwarding

- logging level fabricpath switch-id

- logging level feature-mgr

- logging level fex

- logging level fs-daemon

- logging level glbp

- logging level gpixm

- logging level hsrp

- logging level igmp

- logging level im

- logging level imp

- logging level interface-vlan

- logging level ip pim

- logging level ip sla responder

- logging level ip sla sender

- logging level ipconf

- logging level ipfib

- logging level ipqos

- logging level ipv6 pim

- logging level iscm

- logging level iscm

- logging level isis

- logging level keystore

- logging level l2fm

- logging level l3vm

- logging level lacp

- logging level ldap

- logging level license

- logging level lim

- logging level lisp

- logging level lldp

- logging level m2rib

- logging level mfdm

- logging level mfwd

- logging level mmode

- logging level module

- logging level monitor

- logging level mpls ldp

- logging level mpls manager

- logging level mpls static

- logging level mpls switching

- logging level mpls traffic-eng

- logging level msdp

- logging level mvsh

- logging level nat

- logging level nbm

- logging level netstack

- logging level nfm

- logging level ngoam

- logging level ntp

- logging level nve

- logging level nxsdk

- logging level onep

- logging level orib

- logging level ospf

- logging level ospfv3

- logging level otm

- logging level otv

- logging level pfstat

- logging level pim

- logging level pim6

- logging level pixm

- logging level pktmgr

- logging level platform

- logging level plcmgr

- logging level pltfm_config

- logging level plugin

- logging level poap

- logging level port-profile

- logging level port-security

- logging level port_client

- logging level port_lb

- logging level private-vlan

- logging level ptp

- logging level radius

- logging level res_mgr

- logging level rip

- logging level rpm

- logging level rsvp

- logging level sal

- logging level scheduler

- logging level security

- logging level session-mgr

- logging level sflow

- logging level smm

- logging level snmpd

- logging level snmpmib_proc

- logging level spanning

- logging level spm

- logging level stripcl

- logging level sysmgr

- logging level tacacs

- logging level tamnw

- logging level telemetry

- logging level track

- logging level tunnel

- logging level u2rib

- logging level u6rib

- logging level udld

- logging level ufdm

- logging level urib

- logging level vdc_mgr

- logging level virtual-service

- logging level vlan_mgr

- logging level vmm

- logging level vmtracker

- logging level vntag

- logging level vpc

- logging level vrrp

- logging level vrrpv3

- logging level vshd

- logging level vtp

- logging level xbar

- logging logfile

- logging max_filesize

- logging max_messages

- logging message interface type ethernet

- logging module

- logging monitor

- logging origin-id

- logging reconcile

- logging server

- logging source-interface

- logging timestamp

- login on-failure log

- login on-success log

- logit

- logout-warning

- low-memory exempt

- lshow

- lshow

- lsp-gen-interval

- lsp-gen-interval

- lsp-gen-interval

- lsp-mtu

- lsp-mtu

- lsp-mtu

- lsp

- lsp

- lsp attributes

l2 mfwd mroute add

[no] l2 mfwd mroute add <vlan_id> <group> <source> <source_mac>

Syntax Description

no

(Optional) Negate a command or set its defaults

l2

Layer2

mfwd

Multicast client

add

Add

mroute

Multicast route information

vlan_id

OTV enabled vlan

source

Source to add

group

Group to add

source_mac

Source MAC

Command Mode

- /exec/configure

l2rib dup-host-mac-detection

{ no l2rib dup-host-mac-detection } | { l2rib dup-host-mac-detection <num-of-moves> <duration> }

Syntax Description

no

Negate a command or set its defaults

l2rib

Layer 2 routing information base

dup-host-mac-detection

Set Duplicate-Host-MAC-Detection parameters

num-of-moves

Number of host moves to be allowed

duration

Duplicate detection timeout in secs for host moves

Command Mode

- /exec/configure

l2rib dup-host-mac-recovery

{ no l2rib dup-host-mac-recovery } | { l2rib dup-host-mac-recovery <timeout> <retry-count> }

Syntax Description

no

Negate a command or set its defaults

l2rib

Layer 2 routing information base

dup-host-mac-recovery

Set Duplicate-Host-MAC-Recovery (Unfreeze) parameters

timeout

Unfreeze timeout (secs)

retry-count

Unfreeze retry count

Command Mode

- /exec/configure

l2rib event-history size

l2rib event-history { client-tbl | ead-pl | errors | mac | mac-ip | misc-obj | rmac | topology | tx-infra | server } size { default | medium | high | very-high }

Syntax Description

l2rib

Layer 2 routing information base

event-history

Set event-history size for L2RIB

client-tbl

L2RIB Client, Producer, Consumer Tables Event Logs

ead-pl

L2RIB EAD, Path-List Objects Event Logs

errors

L2RIB Error Logs

mac

L2RIB MAC Object Event Logs

mac-ip

L2RIB MAC Object Event Logs

misc-obj

L2RIB IMET, Flood-List, ARP-Signal, Peer ID, Startup-Routes Objects Event Logs

rmac

L2RIB Router MAC Object Event Logs

topology

L2RIB Topology Object Event Logs

tx-infra

L2RIB TxList, TxSend, TxThread Event Logs

server

L2RIB Sysmgr, PSS, HA Logs

size

Size

default

Default (Low)

medium

Medium

high

High

very-high

Very High

Command Mode

- /exec/configure

l3vm event-history

[no] l3vm event-history { pss | errors | mts | reinit | cli | vrf | topology } { size { <size_in_text> | <size_in_Kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

l3vm

Debug L3VM information

event-history

log debug events into event history buffer

pss

L3VM pss operation

errors

L3VM errors

mts

L3VM MTS messages

reinit

L3VM reinit events

cli

Log L3VM CLI related events

vrf

Log VRF related events

topology

Log Topology related events

size

Configure the size of the event-hist buffer

size_in_text

Buffer size

size_in_Kbytes

Size of the file in kbytes

Command Mode

- /exec

label-allocation-mode per-vrf

label-allocation-mode per-vrf | no label-allocation-mode [ per-vrf ]

Syntax Description

no

Negate a command or set its defaults

label-allocation-mode

Configure label allocation mode

per-vrf

per VRF label allocation mode

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

label allocate global

[no] label allocate global { all-routes | host-routes | prefix-list <pfx-list> }

Syntax Description

no

(Optional) Negate a command or set its defaults

label

LDP label configuration

allocate

Allocate local labels

global

Specify default VPN Routing/Forwarding instance

all-routes

Allocate local labels for all routes

host-routes

Allocate local labels for host routes only (default)

prefix-list

Specify a prefix-list for local label filtering

pfx-list

IP prefix-list for destination prefixes

Command Mode

- /exec/configure/ldp

lacp fast-select-hot-standby

lacp fast-select-hot-standby | no lacp fast-select-hot-standby

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

fast-select-hot-standby

Configure fast select for hot standby ports. Enabling this feature will allow fast selection of hot standby port when last active port in the port-channel is going down.

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp graceful-convergence

lacp graceful-convergence | no lacp graceful-convergence

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

graceful-convergence

Configure port-channel lacp graceful convergence. Disable this only with lacp ports connected to Non-Nexus peer. Disabling this with Nexus peer can lead to port suspension

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp max-bundle

lacp max-bundle <max-bundle-number> | no lacp max-bundle [ <max-bundle-number> ]

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

max-bundle

Configure the port-channel max-bundle

max-bundle-number

Enter the max-bundle number

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp min-links

lacp min-links <min-links-number> | no lacp min-links [ <min-links-number> ]

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

min-links

Configure the port-channel min-links

min-links-number

Enter the min-link number

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp mode delay

[no] lacp mode delay

Syntax Description

no

(Optional) Negate a command or set its defaults

lacp

Set LACP parameters for the interface

mode

Enter the LACP mode

delay

Configure delayed lacp on the port-channel

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp port-priority

lacp port-priority <port-pri> | no lacp port-priority

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

port-priority

Set LACP port priority

port-pri

Enter port priority

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

lacp rapid-transition

lacp rapid-transition | no lacp rapid-transition

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

rapid-transition

Optimizes LACP timers for rapid transition from P->I, I->P state

Command Mode

- /exec/configure

lacp rate

lacp rate <rate_type>

Syntax Description

lacp

Set LACP parameters for the interface

rate

Configure rate at which PDUs are sent by LACP

rate_type

Rate type

Command Mode

- /exec/configure/if-ethernet /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-ethernet-m /exec/configure/if-ethernet-switch-m /exec/configure/if-remote-ethernet /exec/configure/if-remote-ethernet-switch

lacp rate

[no] lacp rate

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

rate

Configure rate at which PDUs are sent by LACP

Command Mode

- /exec/configure/if-ethernet /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-ethernet-m /exec/configure/if-ethernet-switch-m /exec/configure/if-remote-ethernet /exec/configure/if-remote-ethernet-switch

lacp suspend-individual

lacp suspend-individual | no lacp suspend-individual

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

suspend-individual

Configure lacp port-channel state. Disabling this will cause lacp to put the port to individual state and not suspend the port in case it does not get LACP BPDU from the peer ports in the port-channel

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp system-priority

lacp system-priority <sys-pri> | no lacp system-priority

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

system-priority

Set LACP system priority

sys-pri

Enter System Priority

Command Mode

- /exec/configure

lacp vpc-convergence

lacp vpc-convergence | no lacp vpc-convergence

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

vpc-convergence

Enable lacp convergence for vPC port channels.

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

last

| last [ <lines> ]

Syntax Description

|

Pipe command output to filter

last

Display last lines

lines

(Optional) number of lines to print

Command Mode

- /output

layer-2 multicast lookup mac

[no] layer-2 multicast lookup mac

Syntax Description

no

(Optional) Negate a command or set its defaults

layer-2

set layer2 multicast lkup mode

multicast

set layer2 multicast lkup mode

lookup

lkup type can be either mac or ip based

mac

set mac based multicast lkup mode

Command Mode

- /exec/configure

layer-2 multicast lookup mac

[no] layer-2 multicast lookup mac

Syntax Description

no

(Optional) Negate a command or set its defaults

layer-2

set layer2 multicast lkup mode

multicast

set layer2 multicast lkup mode

lookup

lkup type can be either mac or ip based

mac

set mac based multicast lkup mode

Command Mode

- /exec/configure/vlan

layer-2 multicast lookup mac

[no] layer-2 multicast lookup mac

Syntax Description

no

(Optional) Negate a command or set its defaults

layer-2

set layer2 multicast lkup mode

multicast

set layer2 multicast lkup mode

lookup

lkup type can be either mac or ip based

mac

set mac based multicast lkup mode

Command Mode

- /exec/configure/vlan-config /exec/configure/bdomain

layer2-switched flow monitor input

[no] layer2-switched flow monitor <monitorname> input [ sampler <samplername> ]

Syntax Description

layer2-switched

Configure L2 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

sampler

(Optional) Optional Sampler to apply to this Flow Monitor

samplername

(Optional) Name of Sampler

Command Mode

- /exec/configure/if-switching

layer3 peer-router

layer3 peer-router | no layer3 peer-router

Syntax Description

no

Negate a command or set its defaults

layer3

Enable layer 3 functionality

peer-router

no change for TTL of packets destined to the peer

Command Mode

- /exec/configure/vpc-domain

layer3 peer-router syslog

layer3 peer-router syslog [ interval <syslog-interval> ] | no layer3 peer-router syslog

Syntax Description

no

Negate a command or set its defaults

layer3

Enable layer 3 functionality

peer-router

no change for TTL of packets destined to the peer

syslog

print layer 3 protocol syslog

interval

(Optional) how frequent to print the syslog

syslog-interval

(Optional) how many seconds to print a syslog

Command Mode

- /exec/configure/vpc-domain

ldap-search-map

ldap-search-map <s0>

Syntax Description

ldap-search-map

Set one of the configured search-map as active

s0

Name of the search-map

Command Mode

- /exec/configure/ldap

ldap-search-map

[no] ldap-search-map

Syntax Description

no

Negate a command or set its defaults

ldap-search-map

Set one of the configured search-map as active

Command Mode

- /exec/configure/ldap

ldap-server deadtime

[no] ldap-server deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

deadtime

Global LDAP server deadtime period in seconds

i0

LDAP server deadtime period in minutes (default 0 mins -disabled)

Command Mode

- /exec/configure

ldap-server host

[no] ldap-server host { <hostipname> } [ { enable-ssl | port <i1> [ timeout <i2> ] | rootDN <s0> [ password { 7 <s1> { { [ port1 <i3> [ timeout1 <i4> ] ] } | { [ timeout5 <i9> ] } } | <s2> { { [ port2 <i5> [ timeout2 <i6> ] ] } | { [ timeout4 <i8> ] } } } ] | timeout3 <i7> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

host

LDAP server's DNS name or IP address

hostipname

IPV4/IPV6 address or DNS name

enable-ssl

(Optional) LDAP server enable ssl

port

(Optional) LDAP server's port (default: global config)

i1

(Optional) port number

timeout

(Optional) LDAP server timeout period in seconds

i2

(Optional) LDAP server timeout in seconds (default: global config)

rootDN

(Optional) LDAP server root DN

s0

(Optional) root DN

password

(Optional) LDAP server root password

7

(Optional) LDAP root password (encrypted)

s1

(Optional) password (encrypted)

port1

(Optional) LDAP server's port (default: global config)

i3

(Optional) port number

timeout1

(Optional) LDAP server timeout period in seconds

i4

(Optional) LDAP server timeout in seconds (default: global config)

s2

(Optional) password (clear text)

port2

(Optional) LDAP server's port (default: global config)

i5

(Optional) port number

timeout2

(Optional) LDAP server timeout period in seconds

i6

(Optional) LDAP server timeout in seconds (default: global config)

timeout3

(Optional) LDAP server timeout period in seconds

i7

(Optional) LDAP server timeout in seconds (default: global config)

timeout4

(Optional) LDAP server timeout period in seconds

i8

(Optional) LDAP server timeout in seconds (default: global config)

timeout5

(Optional) LDAP server timeout period in seconds

i9

(Optional) LDAP server timeout in seconds (default: global config)

Command Mode

- /exec/configure

ldap-server host test rootDN

[no] ldap-server host { <hostipname> } test rootDN <r1> { { [ username <s0> { [ password { [ 7 <s2> | <s1> ] } [ idle-time <i1> ] ] | [ idle-time <i1> ] } ] } | { [ password { [ 7 <s2> | <s1> ] } [ idle-time <i1> ] ] } | { [ idle-time <i1> ] } }

Syntax Description

username

(Optional) <s0>

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

host

LDAP server's IP address

hostipname

IPV4/IPV6 address or DNS name

test

Parameters to send test packets

7

(Optional) LDAP test password (encrypted)

s0

(Optional) user name

password

(Optional) user password in test packets

s1

(Optional) test password

s2

(Optional) test password (encrypted)

rootDN

rootDN in test packets

r1

root DN

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

- /exec/configure

ldap-server port

[no] ldap-server port <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

port

Global LDAP server's port (default 389)

i0

port number

Command Mode

- /exec/configure

ldap-server timeout

[no] ldap-server timeout <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

timeout

Global LDAP server timeout period in seconds

i0

LDAP server timeout period in seconds (default 5 sec)

Command Mode

- /exec/configure

ldap search-map

[no] ldap search-map <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap

Configure information about ldap

search-map

Configure the search-map

s0

Search Map Name

Command Mode

- /exec/configure

less

| less [ -d | -E ] +

Syntax Description

|

Pipe command output to filter

less

Filter for paging

-d

(Optional) dumb terminal

-E

(Optional) quit at end of file

Command Mode

- /output

license expiry check_interval

license expiry check_interval <i0>

Syntax Description

license

Enter the license configuration mode

expiry

Configure the expiry check interval

check_interval

Configure the expiry check interval

i0

Specify the license expiry check interval in seconds

Command Mode

- /exec

license grace-period

[no] license grace-period

Syntax Description

no

(Optional) Negate a command or set its defaults

license

Modify license features

grace-period

Configure grace period support for licenses

Command Mode

- /exec/configure

license grace-period days

license grace-period days <i0>

Syntax Description

license

Enter the license configuration mode

grace-period

Configure the grace period

days

Congigure the grace period in days

i0

Number of days

Command Mode

- /exec

license grace-period seconds

license grace-period seconds <i0>

Syntax Description

license

Enter license configuration mode

grace-period

Configure the grace period

seconds

Configure the grace period in seconds

i0

Specify the grace period in seconds

Command Mode

- /exec

license grace period

license grace period <i0>

Syntax Description

license

Enter the license configuration mode

grace

Configure the grace period

period

Specify the grace period in days

i0

Command Mode

- /exec

license reserve count package module

[no] license reserve count <i0> package <license-feature> module <i1>

Syntax Description

no

(Optional) Negate a command or set its defaults

license

Display licensing information

reserve

Reserve the licenses for the specified module

count

Count of licenses to reserve

i0

Count of licenses

package

Name of the license package to reserve

license-feature

Name of the license package

module

Module number

i1

Module number

Command Mode

- /exec/configure

limit-resource m4route-mem maximum equal-to-min

{ limit-resource m4route-mem [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } } | { no limit-resource m4route-mem [ [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

m4route-mem

set ipv4 route memory limits

minimum

(Optional) minimum route memory to allocate

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource m6route-mem maximum

{ limit-resource m6route-mem [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> } } | { no limit-resource m6route-mem [ [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

m6route-mem

set ipv6 route memory limits

minimum

(Optional) minimum route memory to allocate

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource module-type

{ limit-resource module-type <card-type> + } | { no limit-resource module-type }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

module-type

Controls which type of modules are allowed in this vdc

card-type

Allowed module types

Command Mode

- /exec/configure/vdc

limit-resource monitor-session-erspan-dst minimum maximum equal-to-min

{ limit-resource monitor-session-erspan-dst minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource monitor-session-erspan-dst [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

limit-resource

Resource configuration

monitor-session-erspan-dst

Monitor erspan destination session

minimum

minimum monitor erspan-dst session to allocate

min-val

minimum monitor erspan-dst session value

maximum

maximum monitor erspan-dst session to allocate

max-val

maximum monitor erspan-dst session value

equal-to-min

set maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource monitor-session-inband-src minimum maximum equal-to-min

{ limit-resource monitor-session-inband-src minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource monitor-session-inband-src [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

limit-resource

Resource configuration

monitor-session-inband-src

Monitor inband source

minimum

minimum monitor inband source to allocate

min-val

minimum monitor inband source value

maximum

maximum monitor inband source to allocate

max-val

maximum monitor inband source value

equal-to-min

set maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource monitor-session minimum maximum equal-to-min

{ limit-resource monitor-session minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource monitor-session [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

limit-resource

Resource configuration

monitor-session

Monitor local/erspan-source session

minimum

minimum monitor local session to allocate

min-val

minimum monitor local session value

maximum

maximum monitor local session to allocate

max-val

maximum monitor local session value

equal-to-min

set maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource port-channel minimum maximum

limit-resource port-channel minimum <min-val> maximum { <max-val> | equal-to-min } | no limit-resource port-channel [ minimum <min-val> maximum { <max-val> | equal-to-min } ]

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

port-channel

set port-channel limits

minimum

minimum port-channels to allocate

min-val

maximum

maximum port-channels to allocate

max-val

equal-to-min

set maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource u4route-mem maximum equal-to-min

{ limit-resource u4route-mem [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } } | { no limit-resource u4route-mem [ [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

u4route-mem

set ipv4 route memory limits

minimum

(Optional) minimum route memory to allocate

min-lo

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource u6route-mem maximum equal-to-min

{ limit-resource u6route-mem [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } } | { no limit-resource u6route-mem [ [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

u6route-mem

set ipv6 route memory limits

minimum

(Optional) minimum route memory to allocate

min-lo

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource vlan minimum maximum equal-to-min

{ limit-resource vlan minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource vlan [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

vlan

set VLAN limits

minimum

minimum VLANs to allocate

min-val

minimum VLANs value

maximum

maximum VLANs to allocate

max-val

maximum VLANs value

equal-to-min

set maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

limit-resource vrf minimum maximum equal-to-min

{ limit-resource vrf minimum <number1> maximum { <number2> | equal-to-min } } | { no limit-resource vrf [ minimum <number1> maximum { <number2> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

vrf

set vrf resource limits

minimum

minimum vrf resources to allocate

number1

minimum vrf resource value

maximum

maximum vrf resources to allocate

number2

maximum vrf resource value

equal-to-min

set maximum value equal to min

Command Mode

- /exec/configure/vdc-template /exec/configure/vdc

line console

[no] line console

Syntax Description

no

(Optional) Negate a command or set its defaults

line

Configure a terminal line

console

Primary terminal line

Command Mode

- /exec/configure

line console

[no] line console

Syntax Description

no

(Optional) Negate a command or set its defaults

line

Configure a terminal line

console

Primary terminal line

Command Mode

- /exec/configure

line vty

[no] line vty

Syntax Description

no

Negate a command or set its defaults

line

Configure a terminal line

vty

Virtual terminal line

Command Mode

- /exec/configure

line vty

line vty

Syntax Description

line

Configure a terminal line

vty

Virtual terminal line

Command Mode

- /exec/configure

link-management timers bandwidth

[no] link-management timers { bandwidth-hold | periodic-flooding } | link-management timers { bandwidth-hold <bw_seconds> | periodic-flooding <flood_seconds> }

Syntax Description

no

Negate a command or set its defaults

link-management

Link Management configuration

timers

Link Management timers configuration

bandwidth-hold

Link Management bandwidth hold timer

bw_seconds

seconds

periodic-flooding

Link Management periodic flooding interval

flood_seconds

seconds [0 to disable, minimum set to 30]

Command Mode

- /exec/configure/te

link debounce

link debounce [ time <time_val> ] | no link debounce [ time <time_val> ]

Syntax Description

no

Negate a command or set its defaults

link

Configure link

debounce

Configure link debounce timer

time

(Optional) Link debounce time

time_val

(Optional) Timer value (in milliseconds)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

lisp

{ lisp-lig | lig } { version | self | self6 | <hostname> | { <eid> | <eid6> } } [ source { <seid> | <seid6> } ] [ to { <mr-hostname> | { <mr> | <mr6> } } ] [ count <count> ] [ probe ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

lisp-lig

LISP Internet Groper

lig

LISP Internet Groper

eid

LIG on a IPv4 Endpoint ID (EID)

version

Display Internet Draft version lig supports

self

Test if IPv4 EID-prefix registered in mapping database

self6

Test if IPv6 EID-prefix registered in mapping database

hostname

DNS name for Endpoint ID (EID)

source

(Optional) Provide source EID for Map-Request

seid

(Optional) Source IPv4 Endpoint ID (EID)

to

(Optional) Where to send the Map-Request

mr-hostname

(Optional) DNS name for Map-Resolver

mr

(Optional) Map-Resolver IPv4 address to send Map-Request to

count

(Optional) Map-Requests to send before Map-Reply returned

count

(Optional) Number of Map-Requests

probe

(Optional) RLOC-probe each locator

vrf

(Optional) LIGing for specific VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

lisp ddt

{ [ no ] lisp ddt }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configures a LISP-DDT mapping system functionality

Command Mode

- /exec/configure /exec/configure/vrf

lisp ddt authoritative-prefix eid-prefix

{ [ no ] lisp ddt authoritative-prefix eid-prefix { <eid-prefix> | <eid-prefix6> } } | { [ no ] lisp ddt authoritative-prefix instance-id <iid> [ eid-prefix { <eid-prefix> | <eid-prefix6> } ] } | { [ no ] lisp ddt authoritative-prefix <star> } | { [ no ] lisp ddt authoritative-prefix instance-id { <iidp> | <range> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

authoritative-prefix

Configure EID-prefix this LISP-DDT node is authoritative for

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

star

Authoritative prefix on root for all address space

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Authoritative IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

Command Mode

- /exec/configure /exec/configure/vrf

lisp ddt delegate eid-prefix

{ [ no ] lisp ddt delegate { <node> | <node6> } { eid-prefix { <eid-prefix> | <eid-prefix6> } } [ priority <priority> weight <weight> ] [ public-key <key> ] [ map-server ] } | { [ no ] lisp ddt delegate { <node> | <node6> } instance-id <iid> [ eid-prefix { <eid-prefix> | <eid-prefix6> } ] [ priority <priority> weight <weight> ] [ public-key <key> ] [ map-server ] } | { [ no ] lisp ddt delegate { <node> | <node6> } instance-id { <iidp> | <range> } [ priority <priority> weight <weight> ] [ public-key <key> ] [ map-server ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

delegate

Configure LISP-DDT child in delegation hierarchy

node

IPv4 locator address of DDT node

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Child delegration for IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

priority

(Optional) Configures which Locators from a set are preferred

priority

(Optional) Lower priority Locator takes preference

weight

(Optional) Traffic load-spreading among Locators

weight

(Optional) Specified in a percentage from 0 to 100

map-server

(Optional) Child delegate is a Map-Server

public-key

(Optional) DDT child's public key this DDT-node supplies for referrals

key

(Optional) RSA public-key

Command Mode

- /exec/configure /exec/configure/vrf

lisp ddt inherit-referrals

{ [ no ] lisp ddt inherit-referrals }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

inherit-referrals

Inherit map-server referrals from parent DDT-node

Command Mode

- /exec/configure /exec/configure/vrf

lisp ddt map-server-peer eid-prefix

{ [ no ] lisp ddt map-server-peer { <node> | <node6> } { eid-prefix { <eid-prefix> | <eid-prefix6> } } [ priority <priority> weight <weight> ] [ public-key <key> ] } | { [ no ] lisp ddt map-server-peer { <node> | <node6> } instance-id <iid> [ eid-prefix { <eid-prefix> | <eid-prefix6> } ] [ priority <priority> weight <weight> ] [ public-key <key> ] } | { [ no ] lisp ddt map-server-peer { <node> | <node6> } instance-id { <iidp> | <range> } [ priority <priority> weight <weight> ] [ public-key <key> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

map-server-peer

Configure other map-server peers

node

IPv4 locator address of DDT node

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Child delegration for IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

priority

(Optional) Configures which Locators from a set are preferred

priority

(Optional) Lower priority Locator takes preference

weight

(Optional) Traffic load-spreading among Locators

weight

(Optional) Specified in a percentage from 0 to 100

public-key

(Optional) DDT child's public key this DDT-node supplies for referrals

key

(Optional) RSA public-key

Command Mode

- /exec/configure /exec/configure/vrf

lisp ddt private-key

[no] lisp ddt private-key <key>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

private-key

Configures LISP-DDT private-key for signing Map-Referral messages

key

RSA private-key

Command Mode

- /exec/configure /exec/configure/vrf

lisp ddt root

[no] lisp ddt root { <root> | <root6> } [ public-key <key> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

root

Configure LISP-DDT root of tree in Map-Resolver

root

IPv4 locator address of DDT root

public-key

(Optional) DDT root's public key used to verify signed Map-Referrals

key

(Optional) RSA public-key

Command Mode

- /exec/configure /exec/configure/vrf

lisp dont-prime-map-cache

{ [ no ] lisp dont-prime-map-cache }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dont-prime-map-cache

Do not send Map-Requests for arbitrary EIDs to prime map-cache

Command Mode

- /exec/configure /exec/configure/vrf

lisp dynamic-eid

{ [ no ] lisp dynamic-eid <dyn-eid-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dynamic-eid

Configure dynamic-EIDs for roaming

dyn-eid-name

Name your dynamic-EID

Command Mode

- /exec/configure/vrf

lisp dynamic-eid

{ [ no ] lisp dynamic-eid <dyn-eid-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dynamic-eid

Configure dynamic-EIDs for roaming

dyn-eid-name

Name your dynamic-EID

Command Mode

- /exec/configure

lisp explicit-locator-path

[no] lisp explicit-locator-path <elp-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

explicit-locator-path

Configures a LISP Explicit Locator Path (ELP)

elp-name

Name of LISP ELP

Command Mode

- /exec/configure/vrf

lisp explicit-locator-path

{ [ no ] lisp explicit-locator-path <elp-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

explicit-locator-path

Configures a LISP Explicit Locator Path (ELP)

elp-name

Name of LISP ELP

Command Mode

- /exec/configure

lisp extended-subnet-mode

{ [ no ] lisp extended-subnet-mode }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

extended-subnet-mode

Create dynamic-EID state when EIDs reside on their home subnet

Command Mode

- /exec/configure/if-igp

lisp geo-coordinates

[no] lisp geo-coordinates <latitude> <longitude> [ <altitude> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

geo-coordinates

Configure Geo Coordinates for this router

latitude

Latitude in DMS format: 'degree-min-sec-N' or 'degree-min-sec-S

longitude

Longitude in DMS format: 'degree-min-sec-E' or 'degree-min-sec-W format

altitude

(Optional) Altitude in meters above sea-level

Command Mode

- /exec/configure /exec/configure/vrf

lisp ignore-smr

[no] lisp ignore-smr

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ignore-smr

Do not respond to SMRs when no map-cache entry exists

Command Mode

- /exec/configure

lisp instance-id

[no] lisp instance-id <iid>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

instance-id

Configures Instance-ID for global data-mappings

iid

24-bit instance-ID value

Command Mode

- /exec/configure /exec/configure/vrf

lisp loc-reach-algorithm

[no] lisp loc-reach-algorithm { count-tcp | echo-nonce | { rloc-probing [ map-request-on-failure ] } }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

loc-reach-algorithm

Configure locator reachability algorithm

count-tcp

Count TCP SYNs and ACKs

echo-nonce

Request for nonce to echo back in data-plane

rloc-probing

Probe each high-priority RLOC with Map-Request as last resort

map-request-on-failure

(Optional) Send Map-Request to database mapping system when any RLOC for a map-cache entry becomes RLOC-probing unreachable

Command Mode

- /exec/configure /exec/configure/vrf

lisp merge-registrations site-id

[no] lisp merge-registrations site-id <site-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

merge-registrations

ETRs merge registrations from Map-Notify messages

site-id

Configure site-id value for each xTR at site

site-id

Site-ID to group xTRs together

Command Mode

- /exec/configure /exec/configure/vrf

lisp mobility

[no] lisp mobility <dyn-eid-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

mobility

Configures to allow EID mobility on interface

dyn-eid-name

Name of the dynamic-EID to use

Command Mode

- /exec/configure/if-igp

lisp mobility test-liveness

[no] lisp mobility test-liveness

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

mobility

Configures to allow EID mobility on interface

test-liveness

Ping discovered dyn-eid hosts on this interface periodically to determine host liveness

Command Mode

- /exec/configure/if-igp

lisp mtu

[no] lisp mtu <mtu>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

mtu

Configure the Max MTU value that LISP path will support

mtu

mtu

Command Mode

- /exec/configure

lisp security

[no] lisp security [ strong ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

security

Configure LISP-SEC on ITR or PITR

strong

(Optional) Reject Map-Replies without LISP-SEC signatures included

Command Mode

- /exec/configure /exec/configure/vrf

lisp site

{ [ no ] lisp site <site-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

site

Configures LISP sites in a map-server

site-name

Name your LISP site

Command Mode

- /exec/configure/vrf

lisp site

{ [ no ] lisp site <site-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

site

Configures LISP sites in a map-server

site-name

Name your LISP site

Command Mode

- /exec/configure

lisp smr-local-locators

[no] lisp smr-local-locators

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

smr-local-locators

Send SMR to all locators for in local site

Command Mode

- /exec/configure

lisp smr-locators

[no] lisp smr-locators

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

smr-locators

Send SMR to all RLOCs in locator-set for map-cache entry

Command Mode

- /exec/configure

lisp to

{ lisp-rig | rig } [ instance-id <iid> ] { <hostname> | { <eid> | <eid6> } } to { <ddt-hostname> | { <ddt> | <ddt6> } }

Syntax Description

lisp-rig

LISP-DDT Referral Internet Groper

rig

LISP-DDT Referral Internet Groper

instance-id

(Optional) Instance-ID of VPN EID resides in

iid

(Optional) 24-bit instance-ID value

eid

RIG on a IPv4 Endpoint ID (EID)

hostname

DNS name for Endpoint ID (EID)

to

Where to send the Map-Request

ddt-hostname

DNS name for DDT-node

ddt

DDT-node IPv4 address to send Map-Request to

Command Mode

- /exec

list

list [ <index> ]

Syntax Description

list

Re-list all or part of the explicit path entries

index

(Optional) List starting at entry index number

Command Mode

- /exec/configure/te/expl-path

list

list

Syntax Description

list

Re-list all of the attribute list entries

Command Mode

- /exec/configure/te/lsp-attr

listobject-boolean not

listobject-boolean <object-id> not

Syntax Description

listobject-boolean

Configure Object as member of tracking list

object-id

Tracked object

not

Negate Up status

Command Mode

- /exec/configure/tr-list-bool

listobject-weight weight threshold-weight

listobject-weight { <object-id> weight <weight-val> } | threshold-weight { weight-thresh { weightup <up-weight> [ weightdown <down-weight> ] | weightdown <down-weight> [ weightup <up-weight> ] } } | no threshold-weight weight-thresh

Syntax Description

no

Negate a command or set its defaults

listobject-weight

Configure Object as member of tracking list

object-id

Tracked Object

weight

Assign a weight to object

weight-val

Assign a weight to object

threshold-weight

Threshold parameters

weight-thresh

Weight threshold

weightup

Up threshold

up-weight

Up threshold weight

weightdown

(Optional) Down threshold

down-weight

(Optional) Down threshold weight

Command Mode

- /exec/configure/tr-list-thrw

listobject

[no] listobject <object-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

listobject

Configure Object as member of tracking list

object-id

Tracked Object

Command Mode

- /exec/configure/tr-list-thrw /exec/configure/tr-list-thrp /exec/configure/tr-list-bool

lldp

[no] lldp { holdtime <i0> | reinit <i1> | timer <i2> | portid-subtype <i3> | tlv-select { management-address | port-description | port-vlan | system-capabilities | system-description | system-name | dcbxp } }

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure global LLDP parameters

holdtime

Specify the holdtime (in sec) to be sent in packets

i0

holdtime in sec

reinit

Delay (in sec) for LLDP initialisation on any interface

i1

reinit in sec

timer

Specify the rate at which LLDP packets are sent (in sec)

i2

rate of packets in sec

portid-subtype

config portid subtype for LLDP TLV and SNMP MIBs

i3

0: long interface name (default), 1: short interface name

tlv-select

Selection of LLDP to send

management-address

Management Address TLV

port-description

Port Description TLV

port-vlan

Port Vlan ID TLV

system-capabilities

System Capabilities TLV

system-description

System Description TLV

system-name

System Name TLV

dcbxp

DCBXP TLVs

Command Mode

- /exec/configure

lldp eee rx_wake_time

[no] lldp eee { rx_wake_time <i0> | tx_wake_time <i1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure LLDP parameters

eee

Configure LLDP EEE parameters

rx_wake_time

Specify the EEE rx wake time

i0

EEE rx wake time

tx_wake_time

Specify the EEE tx wake time

i1

EEE tx wake time

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp receive

[no] lldp receive

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

receive

Enable LLDP reception on interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-select eee

[no] lldp tlv-select eee

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-select

Configure EEE parameter

eee

Enable/Disable LLDP EEE TLV

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-select management-address v4

[no] lldp tlv-select management-address { v4 | v6 }

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure global LLDP parameters

tlv-select

Selection of LLDP to send

management-address

Management Address TLV

v4

Management Address TLV v4

v6

Management Address TLV v6

Command Mode

- /exec/configure

lldp tlv-set management-address

[no] lldp tlv-set management-address <ip-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

management-address

Management address to be sent in management-tlv of LLDPDU.

ip-addr

IP address in dotted decimal format i.i.i.i

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-set management-address ipv6

[no] lldp tlv-set management-address <ipv6-addr> ipv6

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

management-address

Management address to be sent in management-tlv of LLDPDU.

ipv6

IPV6

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-set vlan

[no] lldp tlv-set vlan [ <vlan-id> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

vlan

VLAN-id whose SVI IP address should be used as management adrress in management-tlv of LLDPDU. Default is native VLAN.

vlan-id

(Optional) vlan-id within range of 1-4094

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp transmit

[no] lldp transmit

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

transmit

Enable LLDP transmission on interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

load-balance

[no] load-balance { [ method { src { ip | ip-l4port <src-protocol> range <src-x> <src-y> } | dst { ip-dst | ip-l4port <dst-protocol> range <dst-x> <dst-y> } } | buckets <num> | mask-position <mask> ] + }

Syntax Description

no

(Optional) Negate a command or set its defaults

load-balance

ITD Loadbalance

method

(Optional) ITD Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

Command Mode

- /exec/configure/itd

load-balance

[no] load-balance { [ method { src { ip | ip-l4port <src-protocol> range <src-x> <src-y> } | dst { ip-dst | ip-l4port <dst-protocol> range <dst-x> <dst-y> } } | buckets <num> | mask-position <mask> ] + }

Syntax Description

no

(Optional) Negate a command or set its defaults

load-balance

ITD Loadbalance

method

(Optional) ITD Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

Command Mode

- /exec/configure/itd

load-balancing

load-balancing <load-bal> | no load-balancing [ <load-bal> ]

Syntax Description

no

Negate a command or set its defaults

load-balancing

Load balancing method

load-bal

Load balancing method

Command Mode

- /exec/configure/if-eth-any/glbp

load-interval

load-interval <interval> | no load-interval [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

load-interval

load-interval <interval> | no load-interval [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

Command Mode

- /exec/configure/if-vlan-common

load-interval counter

load-interval counter <counter_val> <interval> | no load-interval counter <counter_val> [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

counter

Specify counter for this load interval

interval

Load interval delay in seconds

counter_val

Specify counter for this load interval

interval1

(Optional) Load interval delay in seconds

Command Mode

- /exec/configure/if-vlan-common

load-interval counter

load-interval counter <counter_val> <interval> | no load-interval counter <counter_val> [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

counter

Specify counter for this load interval

counter_val

Specify counter for this load interval

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

load

load <uri0> [ <s0> ]

Syntax Description

load

Load system image

uri0

Enter image URI

s0

(Optional) Options

Command Mode

- /exec

load

load <uri0> [ <s0> ]

Syntax Description

load

Load system image

uri0

Enter image URI

s0

(Optional) Options

Command Mode

- /exec

load

load <uri0>

Syntax Description

load

Load system image

uri0

Enter image URI

Command Mode

- /exec

local-as

local-as <asn> | no local-as [ <asn> ]

Syntax Description

no

Negate a command or set its defaults

local-as

Specify the local-as for this vrf

asn

AS number

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf

local-as

{ local-as <asn> [ no-prepend [ replace-as [ dual-as ] ] ] } | { { no | default } local-as [ <asn> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

local-as

Specify the local-as number for the eBGP neighbor

asn

Autonomous System Number

no-prepend

(Optional) Do not prepend the local-as number to updates from the eBGP neighbor

replace-as

(Optional) Prepend only the local-as number to updates to eBGP neighbor

dual-as

(Optional) Connect using either the local-as number or the real as

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

local-label prefix

[no] { [ vrf { <vrf-name> | <vrf-known-name> } ] local-label <static-inlabel> prefix { <prefix> <mask> | <prefix-mask> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

(Optional) VPN Routing/Forwarding instance name

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local-label

Configure local label assignment and forwarding

static-inlabel

Label Value

prefix

For a given prefix

prefix

Destination prefix

mask

Destination prefix mask

prefix-mask

Destination prefix/mask

Command Mode

- /exec/configure/mpls_static/ipv4

local-label prefix

[no] { [ vrf { <vrf-name> | <vrf-known-name> } ] local-label <static-inlabel> prefix { <ipv6-prefix-mask> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

(Optional) VPN Routing/Forwarding instance name

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local-label

Configure local label assignment and forwarding

static-inlabel

Label Value

prefix

For a given prefix

Command Mode

- /exec/configure/mpls_static/ipv6

locator-led

[no] locator-led { chassis | module <module> | fan <fan_num> }

Syntax Description

no

(Optional) Negate a command or set its defaults

locator-led

blink locator led on device

chassis

blink chassis led

module

blink module led

module

please enter the module number

fan

blink Fan led

fan_num

fan number

Command Mode

- /exec

locator-led fex

[no] locator-led fex <chas_no>

Syntax Description

no

(Optional) Negate the command

locator-led

Turn on locator beacon

fex

Blink FEX ID

chas_no

FEX number

Command Mode

- /exec handle auto 619

lockdown

[no] lockdown

Syntax Description

no

(Optional) Negate a command or set its defaults

lockdown

Lockdown the LSP--disable reoptimization

Command Mode

- /exec/configure/te/lsp-attr

log-adjacency-changes

[no] log-adjacency-changes [ detail ]

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

detail

(Optional) Notify all state changes

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

log-adjacency-changes

[no] log-adjacency-changes [ detail ]

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

detail

(Optional) Notify all state changes

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

log-adjacency-changes

[no] log-adjacency-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

log-adjacency-changes

{ [ no ] log-adjacency-changes } | { [ no ] [ eigrp ] log-neighbor-changes }

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-adjacency-changes

Log changes in adjacency state

log-neighbor-changes

Enable/Disable IP-EIGRP neighbor logging

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

log-adjacency-changes

[no] log-adjacency-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

log-adjacency-changes

[no] log-adjacency-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

log-event-type

[no] [ eigrp ] log-event-type [ dual ] [ xmit ] [ transport ]

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-event-type

Set event types logged

dual

(Optional) Log DUAL events

xmit

(Optional) Log transmission events

transport

(Optional) Log transport events

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

log-neighbor-changes

[no] log-neighbor-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

log-neighbor-changes

Log a message for neighbor up/down event

Command Mode

- /exec/configure/router-bgp/vrf-cmds

log-neighbor-changes

[ no | default ] log-neighbor-changes [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

log-neighbor-changes

Log message for neighbor up/down event

disable

(Optional) Disable logging of neighbor up/down event

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

log-neighbor-warnings

{ { [ eigrp ] log-neighbor-warnings [ <interval> ] } | { no [ eigrp ] log-neighbor-warnings [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-neighbor-warnings

Enable/Disable IP-EIGRP neighbor warnings

interval

(Optional) Neighbor warning interval in seconds

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

logging

[no] logging { lsp { path-errors | preemption | reservation-errors | setups | teardowns } | tunnel { lsp-selection | path change } } | logging { lsp { path-errors | preemption | reservation-errors | setups | teardowns } | tunnel { lsp-selection | path change } }

Syntax Description

no

Negate a command or set its defaults

logging

Trap logging configuration

lsp

LSP-specific traps logging configuration

path-errors

Log LSP Path Error traps

preemption

Log LSP Preemption traps

reservation-errors

Log LSP Reservation Error traps

setups

Log LSP Establishment Traps

teardowns

Log LSP Teardown Traps

tunnel

Tunnel-specific traps logging configuration

lsp-selection

Log Tunnel LSP Selection traps

path

Log Tunnel Path-related traps

change

Log Tunnel Path change traps

Command Mode

- /exec/configure/te

logging

[no] logging { neighbor-changes |

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Enable LDP logging

neighbor-changes

Log LDP neighbor state changes

Command Mode

- /exec/configure/ldp

logging abort

logging abort

Syntax Description

logging

Modify message logging facilities

abort

Flushes cached data without committing and releases the lock

Command Mode

- /exec/configure

logging clear_console

logging clear_console

Syntax Description

logging

Exec logging commands

clear_console

Clear Console

Command Mode

- /exec

logging console

[no] logging console [ <i0> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

console

Set console logging

i0

(Optional) 0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging debug

logging debug

Syntax Description

logging

Exec logging commands

debug

Debug logging

Command Mode

- /exec

logging distribute

[no] logging distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

distribute

Enables/disables fabric distribution using cfs.

Command Mode

- /exec/configure

logging drop threshold

logging drop { threshold-packets <threshold-in-packets> | threshold-bytes <threshold-in-bytes> } [ level <level-value> ]

Syntax Description

logging

set logging for copp class

drop

logging for copp drops

threshold-packets

threshold value for dropped packets

threshold-bytes

threshold value for dropped bytes

level

(Optional) syslog level

level-value

(Optional) specify the logging level between 1-7

Command Mode

- /exec/configure/pmap/class

logging drop threshold

[no] logging drop { threshold-packets <threshold-in-packets> | threshold-bytes <threshold-in-bytes> } [ level <level-value> ]

Syntax Description

no

Negate a command or set its defaults

logging

set logging for copp class

drop

logging for copp drops

threshold-packets

threshold value for dropped packets

threshold-bytes

threshold value for dropped bytes

level

(Optional) syslog level

level-value

(Optional) specify the logging level between 1-7

Command Mode

- /exec/configure/pmap/class

logging event link enable

[no] logging event { link-status | trunk-status } { enable | default }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

link-status

UPDOWN and CHANGE messages

trunk-status

TRUNK status messages

enable

To enable logging overriding port level configuration

default

default logging configuration used by interfaces not explicitly configured

Command Mode

- /exec/configure

logging event port link-status

logging event port link-status [ default ] | no logging event port link-status

Syntax Description

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

default

(Optional) Use the global default value

Command Mode

- /exec/configure/if-ether-sub /exec/configure/if-port-channel-sub /exec/configure/if-gig-ether-sub /exec/configure/if-loopback /exec/configure/if-remote-ethernet-sub /exec/configure/if-ether-sub-p2p

logging event port link-status

logging event port link-status

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port link-status

[no] logging event port link-status

Syntax Description

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port link-status default

logging event port link-status default

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

default

Use the global default value

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port trunk-status

logging event port trunk-status

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port trunk-status

[no] logging event port trunk-status

Syntax Description

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port trunk-status default

logging event port trunk-status default

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

default

Use the global default value

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging flush

logging flush

Syntax Description

logging

Exec logging commands

flush

Flushing logging

Command Mode

- /exec

logging invalid-username

[no] logging invalid-username

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

One Platform logging

invalid-username

Display invalid usernames in ONE-P log messages

Command Mode

- /exec/configure/onep

logging ip access-list cache

[no] logging ip access-list cache { { interval <seconds> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

ip

IP configuration

access-list

Access-list

cache

logging

interval

Log-update interval (in sec)

seconds

Log-update interval in seconds

Command Mode

- /exec/configure

logging ip access-list cache entries

[no] logging ip access-list cache { { entries <num_entries> } | { threshold <num_packets> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

ip

IP configuration

access-list

Access-list

cache

logging

entries

Maximum number of log entries cached in software

num_entries

Number of entries

threshold

Log-update threshold

num_packets

Log-update threshold (number of hits)

Command Mode

- /exec/configure

logging ip access-list detailed

[no] logging ip access-list detailed

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Enable detailed logging

ip

configured IP

access-list

Access-list

detailed

Detailed ACL information

Command Mode

- /exec/configure

logging ip access-list include sgt

[no] logging ip access-list include sgt

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

ip

IP configuration

access-list

Access-list

include

Include additional fields in syslogs

sgt

Include source group tag info in syslogs

Command Mode

- /exec/configure

logging level

[no] logging level { xml server | xmlma } <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

xml

xml agent

server

xml agent server

xmlma

xml master agent. Same as combination of keywords xml server

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level

[no] logging level { { ipv6 icmp } | icmpv6 } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipv6

Configure IPv6 features

icmp

ICMPv6 Commands

icmpv6

ICMPv6 Commands

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level

[no] logging level { port-channel <loglevel> | port_channel <loglevel> | eth_port_channel <loglevel> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

port-channel

Set level for port-channel syslog messages

port_channel

Set level for port-channel syslog messages

eth_port_channel

Set level for port-channel syslog messages

loglevel

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level

[no] logging level { { routing [ ip | ipv4 ] multicast } | mrib } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

routing

Configure routing information

ip

(Optional) Configure IP features

ipv4

(Optional) Configure IP features

multicast

Set syslog filter level for MRIB

mrib

Set syslog filter level for MRIB

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level

[no] logging level { { routing ipv6 multicast } | m6rib } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

routing

Configure routing information

ipv6

Configure IPv6 features

multicast

Set syslog filter level for MRIB

m6rib

Set syslog filter level for MRIB

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level

[no] logging level { { otv isis } | isis_otv } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

otv

Set syslog filter level for OTV

isis

Set syslog filter level for IS-IS

isis_otv

Show OTV ISIS logging configuration

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level

[no] logging level { { fabricpath isis } | isis_l2mp | isis_fabricpath } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fabricpath

fabricpath configuration

isis

Set logging level for fabricpath IS-IS

isis_l2mp

Set fabricpath logging configuration

isis_fabricpath

Set fabricpath logging configuration

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level

{ logging level { auth <i1> | authpriv <i2> | cron <i3> | daemon <i4> | ftp <i5> | kernel <i6> | local0 <i7> | local1 <i8> | local2 <i9> | local3 <i10> | local4 <i11> | local5 <i12> | local6 <i13> | local7 <i14> | lpr <i15> | mail <i16> | news <i17> | syslog <i18> | user <i19> | uucp <i20> } | no logging level { auth [ <i1> ] | authpriv [ <i2> ] | cron [ <i3> ] | daemon [ <i4> ] | ftp [ <i5> ] | kernel [ <i6> ] | local0 [ <i7> ] | local1 [ <i8> ] | local2 [ <i9> ] | local3 [ <i10> ] | local4 [ <i11> ] | local5 [ <i12> ] | local6 [ <i13> ] | local7 [ <i14> ] | lpr [ <i15> ] | mail [ <i16> ] | news [ <i17> ] | syslog [ <i18> ] | user [ <i19> ] | uucp [ <i20> ] } }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

auth

Set level for Authorization System

i1

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

authpriv

Set level for Authorization (Private) system

i2

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

cron

Set level for Cron/at facility

i3

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

daemon

Set level for System daemons

i4

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

ftp

Set level for File Transfer System

i5

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

kernel

Set level for kernel

i6

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local0

Set level for Local use daemons

i7

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local1

Set level for Local use daemons

i8

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local2

Set level for Local use daemons

i9

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local3

Set level for Local use daemons

i10

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local4

Set level for Local use daemons

i11

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local5

Set level for Local use daemons

i12

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local6

Set level for Local use daemons

i13

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local7

Set level for Local use daemons

i14

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

lpr

Set level for Line Printer System

i15

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

mail

Set level for Mail system

i16

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

news

Set level for USENET news

i17

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

syslog

Set level for Internal Syslog Messages

i18

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

user

Set level for User Process

i19

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

uucp

Set level for Unix-to-Unix copy system

i20

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level aaa

logging level aaa <i0> | no logging level aaa [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

aaa

Set level for aaa syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level acllog

logging level acllog <i0> | no logging level acllog [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

acllog

Set level for acllog syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level aclmgr

[no] logging level aclmgr <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

aclmgr

Set level for aclmgr syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level adbm

[no] logging level adbm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

adbm

Set level for adbm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level adjmgr

[no] logging level adjmgr <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

adjmgr

Set syslog filter level for Adjacency Manager

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level all

{ logging level { all <i0> } | no logging level { all [ <i0> ] } }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

all

Set level for all facilities

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level amt

[no] logging level amt <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

amt

Set syslog filter level for AMT

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level arp

{ logging level arp <level> } | { no logging level arp [ <level> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

arp

Set syslog filter level for ARP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ascii-cfg

[no] logging level ascii-cfg <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ascii-cfg

Set logging level for ascii-cfg

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level bfd

[no] logging level bfd <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bfd

Set level for bfd syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level bgp

[no] logging level bgp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bgp

Set syslog filter level for BGP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level bloggerd

[no] logging level bloggerd <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bloggerd

Set level for BloggerD syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level bootvar

[no] logging level bootvar <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bootvar

Set level for bootvar

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level callhome

logging level callhome <i0> | no logging level callhome [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

callhome

Callhome syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level capability

[no] logging level capability <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

capability

Set syslog level for mig utils daemon

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level cdp

logging level cdp <i0> | no logging level cdp [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

cdp

Set level for CDP syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level cert

[no] logging level { cert-enroll <i0> | cert_enroll <i1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

cert-enroll

Cert-enroll syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

cert_enroll

Cert-enroll syslog level

i1

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level cfs

[no] logging level cfs <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level clis

[no] logging level clis <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

clis

Set syslog filter level for CLIS

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level clk_mgr

[no] logging level clk_mgr <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

clk_mgr

Set level for clock manager syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level confcheck

{ logging level confcheck <i0> | no logging level confcheck [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level copp

logging level copp <i0> | no logging level copp [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

copp

Set level for copp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level core

{ logging level core <i0> | no logging level core [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

core

core daemon syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level cts

[no] logging level cts <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

cts

Set level for cts syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level device_test

[no] logging level device_test <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

device_test

Set level for GOLD Device Test syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level dhclient

[no] logging level dhclient <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

dhclient

Set level for dhcp client syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level dhcp_snoop

logging level dhcp_snoop <level> | no logging level dhcp_snoop [ <level> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

dhcp_snoop

Set level for dhcp snoop syslog messages

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level diagclient

[no] logging level diagclient <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

diagclient

Set level for GOLD DiagClient syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level diagmgr

[no] logging level diagmgr <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

diagmgr

Set level for GOLD DiagMgr syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level dot1x

logging level dot1x <i0> | no logging level dot1x [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

dot1x

Set level for dot1x syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level eigrp

[no] logging level eigrp [ <eigrp-ptag> ] <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

eigrp

Set syslog filter level for EIGRP

eigrp-ptag

(Optional) Process tag

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level eltm

logging level eltm <i0> | no logging level eltm

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

eltm

Set level for eltm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ethdstats

[no] logging level { ethdstats <i0> | eth_dstats <i0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ethdstats

delta statistics syslog level

eth_dstats

delta statistics syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ethpm

[no] logging level ethpm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ethpm

Set level for ethpm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ethpm link

[no] logging level ethpm { link-up | link-down } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ethpm

Set level for ethpm syslog messages

link-up

Configure logging level for link up syslog messages

link-down

Configure logging level for link down syslog messages

level

Logging Level

Command Mode

- /exec/configure

logging level evb

[no] logging level evb <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evb

Set syslog filter level for EVB

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level evmc

[no] logging level evmc <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evmc

Set level for evmc syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level evmed

[no] logging level evmed <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evmed

Set level for evmed syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level evms

[no] logging level evms <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evms

Set level for evms syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level fabric forwarding

[no] logging level fabric forwarding <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level fabricpath switch-id

[no] logging level fabricpath switch-id <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fabricpath

fabricpath configuration

switch-id

switch-id submodule of fabricpath

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level feature-mgr

{ logging level feature-mgr <i0> | no logging level feature-mgr [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

feature-mgr

Set feature manager syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level fex

[no] logging level fex <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fex

Set level for FEX syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level fs-daemon

{ logging level fs-daemon <i0> | no logging level fs-daemon [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fs-daemon

fs daemon syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level glbp

[no] logging level glbp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

glbp

Set level for glbp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level gpixm

[no] logging level gpixm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

gpixm

Set level for global-pixm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level hsrp

[no] logging level hsrp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

hsrp

Set level for hsrp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level igmp

[no] logging level [ ip ] igmp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

(Optional) Configure IP features

igmp

IGMP global configuration commands

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level im

[no] logging level { im <i0> | ifmgr <i0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

im

Set level for im syslog messages

ifmgr

Set level for im syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level imp

[no] logging level imp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

imp

Set level for imp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level interface-vlan

[no] logging level interface-vlan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

interface-vlan

Set level for interface vlan syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ip pim

[no] logging level ip pim <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

Configure IP features

pim

Set syslog filter level for PIM

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ip sla responder

[no] logging level ip sla responder <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

sla

Service Level Agreement (SLA)

responder

Set level for sla-responder syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ip sla sender

[no] logging level ip sla sender <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

sla

Service Level Agreement (SLA)

sender

Set level for sla-sender syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ipconf

[no] logging level ipconf { ipv6 <i0> | <i1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipconf

Set level for ipconf syslog messages

ipv6

Set level for ipconf syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

i1

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ipfib

logging level ipfib <i0> | no logging level ipfib

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipfib

Set level for ipfib syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ipqos

[no] logging level { ipqos | IPQOSMGR } <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ipv6 pim

[no] logging level ipv6 pim <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipv6

Configure IPv6 features

pim

Set syslog filter level for PIM6

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level iscm

[no] logging level iscm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

iscm

Set level for iscm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level iscm

[no] logging level iscm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

iscm

Set level for iscm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level isis

[no] logging level isis <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

isis

Set syslog filter level for IS-IS

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level keystore

logging level { keystore | sksd } <i0> | no logging level { keystore | sksd } [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

keystore

Keystore syslog level

sksd

Keystore/sksd syslog level

i0

Command Mode

- /exec/configure

logging level l2fm

logging level l2fm <i0> | no logging level l2fm

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

l2fm

Set level for l2fm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level l3vm

[no] logging level l3vm <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

l3vm

Set syslog filter level for L3VM

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level lacp

[no] logging level lacp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lacp

Set level for lacp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ldap

logging level ldap <i0> | no logging level ldap [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ldap

Set level for ldap syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level license

logging level { license | licmgr } <i0> | no logging level { license | licmgr } [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

license

Licensing syslog level

licmgr

Licensing syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level lim

[no] logging level lim <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lim

Set level for lim syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level lisp

[no] logging level lisp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lisp

Set logging level for LISP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level lldp

[no] logging level lldp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lldp

Set level for lldp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level m2rib

[no] logging level m2rib <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

m2rib

Set level for m2rib syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mfdm

logging level mfdm <i0> | no logging level mfdm

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mfdm

Set level for mfdm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mfwd

[no] logging level { mfwd | mcastfwd } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mfwd

Configures Global IP Multicast Forwarding

mcastfwd

Configures Global IP Multicast Forwarding

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mmode

[no] logging level mmode <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mmode

Set level for maintenance mode syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level module

[no] logging level module <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

module

Set level for module(linecard) manager syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level monitor

[no] logging level monitor <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

monitor

Set level for ethernet span syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mpls ldp

[no] logging level mpls ldp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mpls

Set level for MPLS syslog messages

ldp

Set level for LDP syslog messages

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mpls manager

[no] logging level mpls manager <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mpls

Set level for MPLS syslog messages

manager

Set level for MPLS manager syslog messages

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mpls static

[no] logging level mpls static <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mpls

Set level for MPLS syslog messages

static

Set level for MPLS Static syslog messages

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mpls switching

[no] logging level mpls switching <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mpls

Set level for MPLS syslog messages

switching

Set level for mpls switching syslog messages

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mpls traffic-eng

[no] logging level mpls traffic-eng <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mpls

Set level for MPLS syslog messages

traffic-eng

Set level for Traffic Engineering syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level msdp

[no] logging level [ ip ] msdp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

(Optional) Configure IP features

msdp

Set syslog filter level for MSDP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level mvsh

[no] logging level mvsh <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mvsh

Set level for mvsh syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level nat

logging level nat <i0> | no logging level nat [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

nat

Set level for NAT syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level nbm

logging level nbm <i0> | no logging level nbm

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

nbm

Set level for nbm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level netstack

{ logging level netstack <level> } | { no logging level netstack [ <level> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

netstack

Set syslog filter level for Netstack

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level nfm

[no] logging level nfm <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

nfm

Set level for nfm syslog messages

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ngoam

[no] logging level ngoam <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ngoam

Set level for oam logging messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure handle function sdstub_syslog sdwrap args-legacy

logging level ntp

[no] logging level ntp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ntp

Set syslog filter level for NTP

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level nve

[no] logging level nve <inp>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

nve

Display NVE information

inp

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level nxsdk

[no] logging level nxsdk <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

nxsdk

NXOS SDK

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level onep

[no] logging level onep <0-7>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

onep

One Platform

0-7

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level orib

[no] logging level orib <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

orib

Set syslog filter level for ORIB

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ospf

[no] logging level ospf <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ospf

Set syslog filter level for OSPF

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ospfv3

[no] logging level ospfv3 <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ospfv3

Set syslog filter level for OSPFv3

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level otm

[no] logging level otm <i0>

Syntax Description

logging

Modify message logging facilities

level

Facility parameter for syslog messages

otm

Set level for otm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level otv

[no] logging level otv <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

otv

Set syslog filter level for OTV

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level pfstat

logging level pfstat <i0> | no logging level pfstat

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

pfstat

Set level for pfstat syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level pim

[no] logging level pim <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

pim

Set syslog filter level for PIM

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level pim6

[no] logging level pim6 <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

pim6

Set syslog filter level for PIM6

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level pixm

[no] logging level pixm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

pixm

Set level for vdc-local-pixm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level pktmgr

[no] logging level pktmgr <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

pktmgr

Set syslog filter level for Packet manager

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level platform

[no] logging level platform <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

platform

platform manager syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level plcmgr

[no] logging level { plcmgr | ipplc } <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level pltfm_config

[no] logging level pltfm_config <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

pltfm_config

Set level for pltfm_config syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level plugin

{ logging level plugin <i0> | no logging level plugin [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

plugin

Set level for plugin syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level poap

[no] logging level poap <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

poap

Set level for poap syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level port-profile

logging level port-profile <i0> | no logging level port-profile [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

port-profile

Set level for port-profile syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level port-security

logging level port-security <i0> | no logging level port-security [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

port-security

Set level for port-security syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level port_client

[no] logging level port_client <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

port_client

Set level for port_client syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level port_lb

[no] logging level { port_lb <i0> | diag_port_lb <i0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

port_lb

Set level for Diagnostic Port Loopback Test syslog messages

diag_port_lb

Set level for Diagnostic Port Loopback Test syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level private-vlan

[no] logging level private-vlan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

private-vlan

Set level for private VLAN syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ptp

[no] logging level ptp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ptp

Set level for ptp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level radius

logging level radius <i0> | no logging level radius [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

radius

RADIUS syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level res_mgr

[no] logging level res_mgr <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

res_mgr

Set level for res_mgr syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level rip

[no] logging level rip <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

rip

Set syslog filter level for RIP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level rpm

[no] logging level rpm <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

rpm

Set syslog filter level for RPM

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level rsvp

[no] logging level rsvp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

rsvp

Set level for RSVP syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level sal

[no] logging level sal <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

sal

Set level for sal syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level scheduler

[no] logging level scheduler <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

scheduler

Set logging level for scheduler

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level security

logging level { security | securityd } <i0> | no logging level { security | securityd } [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

security

Security syslog level

securityd

Security syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level session-mgr

logging level session-mgr <i0> | no logging level session-mgr [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

session-mgr

Set level for session-manager syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level sflow

[no] logging level sflow <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

sflow

Set level for sFlow syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level smm

[no] logging level smm <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

smm

Set logging level for Shared Memory Manager

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level snmpd

[no] logging level snmpd <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

snmpd

Set level for SNMP syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level snmpmib_proc

[no] logging level snmpmib_proc <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

snmpmib_proc

Set level for snmpmib_proc syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level spanning

[no] logging level { spanning-tree } <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

spanning-tree

Set level for stp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level spm

[no] logging level spm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

spm

Set level for spm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level stripcl

[no] logging level stripcl <log-level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

stripcl

Set level for stripcl syslog messages

log-level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level sysmgr

{ logging level sysmgr <i0> | no logging level sysmgr [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level tacacs

logging level tacacs <i0> | no logging level tacacs [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

tacacs

TACACS+ syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level tamnw

[no] logging level tamnw <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

tamnw

Set level for tamnw syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level telemetry

[no] logging level telemetry <level>

Syntax Description

no

(Optional) Negate a command or set its default

logging

Modify message logging facilities

level

Facility parameter for syslog messages

telemetry

Set syslog filter level for telemetry

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level track

[no] logging level track <i0>

Syntax Description

logging

Modify message logging facilities

level

Facility parameter for syslog messages

track

Set level for track syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level tunnel

logging level tunnel <i0> | no logging level tunnel [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

tunnel

Set level for tunnel syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level u2rib

[no] logging level u2rib <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

u2rib

Set level for u2rib syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level u6rib

[no] logging level u6rib <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

u6rib

Set syslog filter level for U6RIB

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level udld

[no] logging level udld <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

udld

Set level for udld syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level ufdm

[no] logging level ufdm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ufdm

Set level for ufdm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level urib

[no] logging level urib <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

urib

Set syslog filter level for URIB

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vdc_mgr

[no] logging level vdc_mgr <i0>

Syntax Description

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vdc_mgr

Set level for vdc_mgr syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level virtual-service

[no] logging level virtual-service <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

virtual-service

Set level for virtual service syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vlan_mgr

logging level vlan_mgr <i0> | no logging level vlan_mgr [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vlan_mgr

Set level for VLAN syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vmm

[no] logging level vmm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vmm

Set level for vmm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vmtracker

[no] logging level vmtracker <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vmtracker

Set level for vmtracker syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vntag

[no] logging level vntag <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vntag

Set level for vntag syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vpc

[no] logging level vpc <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vpc

Set level for vPC syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vrrp

[no] logging level { vrrp-cfg <cfg_level_num> | vrrp-eng <eng_level_num> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vrrp-cfg

Set level for vrrp configuration

cfg_level_num

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

vrrp-eng

Set level for vrrp engine

eng_level_num

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vrrpv3

[no] logging level { vrrpv3 <level> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vrrpv3

Set level for vrrpv3 configuration

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vshd

[no] logging level vshd <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level vtp

[no] logging level vtp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

vtp

Set level for vtp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging level xbar

[no] logging level xbar <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

xbar

xbar syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging logfile

{ logging logfile <s0> <i0> [ size <i1> ] | no logging logfile [ <s0> <i0> [ size <i1> ] ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

logfile

Set File logging

s0

Enter the logfile name

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

size

(Optional) Set logfile size

i1

(Optional) Enter the logfile size in bytes

Command Mode

- /exec/configure

logging max_filesize

logging max_filesize <i0>

Syntax Description

logging

Exec logging commands

max_filesize

Increase default debug logfile size

i0

Command Mode

- /exec

logging max_messages

logging max_messages <i0>

Syntax Description

logging

Exec logging commands

max_messages

Increase maximum syslogd message buffer size

i0

Command Mode

- /exec

logging message interface type ethernet

logging message interface type ethernet <info> | no logging message interface type ethernet <info>

Syntax Description

no

Negate a command or set its defaults

logging

Configure logging for interface

message

Interface events

interface

Interface level events

type

Interface type

ethernet

Ethernet interfaces

info

Field Names to be added to interface syslog

Command Mode

- /exec/configure

logging module

[no] logging module [ <i0> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

module

Set module(linecard) logging

i0

(Optional) 0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging monitor

[no] logging monitor [ <i0> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

monitor

Set terminal line(monitor) logging level

i0

(Optional) 0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

- /exec/configure

logging origin-id

[no] logging origin-id { hostname | ip <ip0> | string <s0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

origin-id

Enable origin information for Remote Syslog Server

hostname

Use hostname as origin-id of logging messages

ip

Use ip address as origin-id of logging messages

ip0

Hostname/IPv4/IPv6 address

string

Use text string as origin-id of logging messages

s0

Enter string to append to the front of syslog msgs

Command Mode

- /exec/configure

logging reconcile

logging reconcile { all [ force ] | files <i0> | vtys <i1> | dev <s0> }

Syntax Description

logging

Modify message logging facilities

reconcile

Reconcile the internal data structures in syslogd, only use in console connection when all VTYs are closed

all

Reconcile all VTY elements in Files array and VTY list - only supported in console

force

(Optional) Reconcile all VTY elements in Files array and VTY list - force to run in VTYs or console

files

Reconcile specific element in Files array

i0

Enter Files array index to reconcile

vtys

Reconcile specific element in VTY list

i1

Enter VTY list index to reconcile

dev

Reconcile specific dev elements in Files array and VTY list

s0

Enter the dev name to reconcile

Command Mode

- /exec/configure

logging server

[no] logging server <host0> [ [ <i1> ] [ port <port> ] [ use-vrf { <vrf-name> | <vrf-known-name> } | facility { auth | authpriv | cron | daemon | ftp | kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news | syslog | user | uucp } ] + ]

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

server

Enable forwarding to Remote Syslog Server

host0

Hostname/IPv4/IPv6 address of the Remote Syslog Server

i1

(Optional) 0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

port

(Optional) Destination Port when forwarding to remote server

port

(Optional) Range from 1 - 65535(Default 514)

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

facility

(Optional) Facility to use when forwarding to server

auth

(Optional) Use auth facility

authpriv

(Optional) Use authpriv facility

cron

(Optional) Use Cron/at facility

daemon

(Optional) Use daemon facility

ftp

(Optional) Use file transfer system facility

kernel

(Optional) Use kernel facility

local0

(Optional) Use local0 facility

local1

(Optional) Use local1 facility

local2

(Optional) Use local2 facility

local3

(Optional) Use local3 facility

local4

(Optional) Use local4 facility

local5

(Optional) Use local5 facility

local6

(Optional) Use local6 facility

local7

(Optional) Use local7 facility

lpr

(Optional) Use lpr facility

mail

(Optional) Use mail facility

news

(Optional) Use USENET news facility

syslog

(Optional) Use syslog facility

user

(Optional) Use user facility

uucp

(Optional) Use Unix-to-Unix copy system facility

Command Mode

- /exec/configure

logging source-interface

{ logging source-interface <interface> | no logging source-interface }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

source-interface

Enable Source-Interface for Remote Syslog Server

interface

Source interface name

Command Mode

- /exec/configure

logging timestamp

[no] logging timestamp { microseconds | milliseconds | seconds }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

timestamp

Set logging timestamp granularity

microseconds

Timestamp in micro-seconds

milliseconds

Timestamp in milli-seconds

seconds

Timestamp in seconds (Default)

Command Mode

- /exec/configure

login on-failure log

[no] login on-failure log

Syntax Description

no

(Optional) Negate a command or set its defaults

login

login

on-failure

Set options for failed login attempt

log

Generate syslogs on failure logins

Command Mode

- /exec/configure

login on-success log

[no] login on-success log

Syntax Description

no

(Optional) Negate a command or set its defaults

login

login

on-success

Set options for successful login attempt

log

Generate syslogs on successful logins

Command Mode

- /exec/configure

logit

logit <log>

Syntax Description

logit

Add

log

Specify

Command Mode

- /exec

logout-warning

{ logout-warning <i0> | no logout-warning [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logout-warning

Configure logout warning

i0

Enter logout warning time in seconds

Command Mode

- /exec/configure/line

low-memory exempt

[ no | default ] low-memory exempt

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

low-memory

Behaviour

exempt

Do

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

lshow

lshow

Syntax Description

lshow

display this instance of credential

Command Mode

- /exec/configure/dot1x-cred

lshow

lshow

Syntax Description

lshow

local show: displays config of current interface

Command Mode

- /exec/configure/if-igp

lsp-gen-interval

lsp-gen-interval <max-wait> [ <initial-wait> <second-wait> ] | no lsp-gen-interval <max-wait> [ <initial-wait> <second-wait> ]

Syntax Description

no

Negate a command or set its defaults

lsp-gen-interval

Configure LSP generation interval

max-wait

Maximum wait between trigger and LSP generation (milli-secs)

initial-wait

(Optional) Initial wait between trigger and LSP generation (milli-secs)

second-wait

(Optional) Second wait used in LSP generation (milli-secs) during backoff

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

lsp-gen-interval

lsp-gen-interval <level> <max-wait> [ <initial-wait> <second-wait> ] | no lsp-gen-interval <level> <max-wait> [ <initial-wait> <second-wait> ]

Syntax Description

no

Negate a command or set its defaults

lsp-gen-interval

Configure LSP generation interval

level

IS-IS level

max-wait

Maximum wait between trigger and LSP generation (milli-secs)

initial-wait

(Optional) Initial wait between trigger and LSP generation (milli-secs)

second-wait

(Optional) Second wait used in LSP generation (milli-secs) during backoff

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

lsp-gen-interval

lsp-gen-interval <max-wait> [ <initial-wait> <second-wait> ] | no lsp-gen-interval <max-wait> [ <initial-wait> <second-wait> ]

Syntax Description

no

Negate a command or set its defaults

lsp-gen-interval

Configure LSP generation interval

max-wait

Maximum wait between trigger and LSP generation (milli-secs)

initial-wait

(Optional) Initial wait between trigger and LSP generation (milli-secs)

second-wait

(Optional) Second wait used in LSP generation (milli-secs) during backoff

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

lsp-mtu

lsp-mtu <mtu> | no lsp-mtu [ <mtu> ]

Syntax Description

no

Negate a command or set its defaults

lsp-mtu

Set LSP MTU

mtu

Maximum LSP size in bytes

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

lsp-mtu

lsp-mtu <mtu> | no lsp-mtu [ <mtu> ]

Syntax Description

no

Negate a command or set its defaults

lsp-mtu

Set LSP MTU

mtu

Maximum LSP size in bytes

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

lsp-mtu

lsp-mtu <mtu> | no lsp-mtu [ <mtu> ]

Syntax Description

no

Negate a command or set its defaults

lsp-mtu

Set LSP MTU

mtu

Maximum LSP size in bytes

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

lsp

[no] lsp <lsp-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

lsp

Configure the name for the label-switched path

lsp-name

Name for this LSP

Command Mode

- /exec/configure/mpls_static/ipv4

lsp

[no] lsp <lsp-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

lsp

Configure the name for the label-switched path

lsp-name

Name for this LSP

Command Mode

- /exec/configure/mpls_static/ipv6

lsp attributes

[no] lsp attributes <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

lsp

Configure LSP parameters

attributes

Configure LSP attributes

name

Name of LSP attribute list

Command Mode

- /exec/configure/te

Chapter 14. M Commands

- m2rib debug ftag

- m2rib debug gr-route add nh

- m2rib debug log-size event-history

- m2rib debug log-size transactions

- m2rib debug omf enable

- m2rib debug pkt-recv enable

- m2rib debug swroute nh

- m2rib debug topo

- m2rib debug topo loop-flush-timeout

- m6rib mfdm-ack-delay

- mac-address

- mac-address

- mac-address

- mac-address destination

- mac-address ipv6-extract

- mac-learn disable

- mac-learn disable

- mac-list permit

- mac access-list

- mac address-table aging-time

- mac address-table core-port-learning

- mac address-table guard-vpc-peergw-mac

- mac address-table limit system

- mac address-table loop-detect port-down

- mac address-table multicast vlan interface

- mac address-table notification mac-move

- mac address-table notification threshold

- mac address-table static vlan interface

- mac address-table static vni

- mac address

- mac address inherit

- mac advert interval

- mac packet-classify

- mac port access-group

- macsec keychain

- macsec policy

- management

- map-notify-group

- map-server key

- marker-packet

- master ipv4

- match-address

- match

- match

- match

- match access-group name

- match address

- match as-number

- match as-number as-path-list

- match as-path

- match class-map

- match community

- match cos

- match cos

- match datalink

- match dscp

- match dscp

- match exception

- match extcommunity

- match interface

- match ip address

- match ip address prefix-list

- match ip multicast rp

- match ip next-hop prefix-list

- match ip protocol

- match ip route-source prefix-list

- match ipv4 source address

- match ipv6

- match ipv6 address

- match ipv6 address prefix-list

- match ipv6 multicast rp

- match ipv6 next-hop prefix-list

- match ipv6 route-source prefix-list

- match metric

- match ospf-area

- match protocol

- match protocol arp

- match qos-group

- match qos-group2

- match qos-group2

- match qos-group

- match redirect

- match route-type

- match source-protocol

- match tag

- match transport destination

- max-lsa

- max-lsa

- max-lsp-lifetime

- max-lsp-lifetime

- max-lsp-lifetime

- max-metric router-lsa

- max-metric router-lsa

- max-ports

- max-ports

- maxas-limit

- maximum-paths

- maximum-paths

- maximum-paths

- maximum-paths

- maximum-paths

- maximum-paths

- maximum-paths

- maximum-paths eibgp

- maximum-peers

- maximum-prefix

- maximum-prefix

- maximum-prefix

- maximum routes

- mcast-group

- mcectest source

- mdix auto

- mdt asm-use-shared-tree

- mdt data

- mdt data bidir-enable

- mdt data inhibit-reuse

- mdt default

- mdt enforce-bgp-mdt-safi

- mdt mtu

- mdt pim hello-interval

- mdt pim jp-interval

- mdt source

- media-type auto

- media-type rj45

- media-type sfp

- media

- medium

- medium broadcast

- medium broadcast

- medium p2p

- medium p2p

- member vlan

- member vni

- member vni

- member vni associate-vrf

- member vni mcast-group

- merge config

- message-digest-key md5

- message-digest-key md5

- metric-style transition

- metric direct 0

- metric maximum-hops

- metric rib-scale

- metric version 64bit

- metric weights

- mgmt-policy

- mkdir

- mod-serial

- mode

- mode

- mode

- mode auto

- mode every

- mode openflow

- mode out-of

- mode tap-aggregation

- monitor erspan granularity

- monitor erspan origin ip-address

- monitor erspan switch-id

- monitor session

- monitor session shut

- monitor session type acl-capture

- monitor session type erspan-destination

- monitor session type erspan-source

- move

- mping

- mpls ip

- mpls ip default-route

- mpls ip forwarding

- mpls ip propagate-ttl

- mpls ip static

- mpls ip static

- mpls ip ttl-expiration pop

- mpls label-space

- mpls label range

- mpls static binding ipv4

- mpls static binding ipv4 vrf per-vrf input output pop-and-lookup

- mpls static configuration

- mpls strip

- mpls strip

- mpls strip label

- mpls traffic-eng

- mpls traffic-eng administrative-weight

- mpls traffic-eng area

- mpls traffic-eng attribute-flags

- mpls traffic-eng backup-path

- mpls traffic-eng bandwidth

- mpls traffic-eng configuration

- mpls traffic-eng fast-reroute promote

- mpls traffic-eng flooding thresholds up

- mpls traffic-eng multicast-intact

- mpls traffic-eng multicast-intact

- mpls traffic-eng reoptimize

- mpls traffic-eng router-id

- mpls traffic-eng router-id

- mpls traffic-eng tunnels

- mrib mdt

- mrib mfdm-ack-delay

- mst designated priority

- mst root priority

- mtrace

- mtu

- mtu1

- mtu

- mtu

- mtu

- mtu

- mtu

- multi-destination trees

- multi-topology

- multicast

- mvr-config

- mvr-group

- mvr-group

- mvr-group

- mvr-group

- mvr-group

- mvr-group

- mvr-group

- mvr-group

- mvr-type receiver

- mvr-type source

- mvr-vlan

- mvr-vlan

m2rib debug ftag

m2rib debug ftag { add | del | mod } <ftag-id> <topo-id> { [ UCAST ] [ MCAST ] [ ACTIVE ] [ INACTIVE ] } + [ <proto> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

ftag

Configure M2RIB's ftag db

add

Add an ftag

mod

Modify an ftag flags

del

Delete an ftag

ftag-id

ftag id

topo-id

topo id

proto

(Optional) Protocol owner id

UCAST

(Optional) Broadcast ftag

MCAST

(Optional) Multicast ftag

ACTIVE

(Optional) Active ftag

INACTIVE

(Optional) Inactive ftag

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

- /exec

m2rib debug gr-route add nh

m2rib debug gr-route { add | del } <vlan> { { <v4-source> <v4-group> } | { <v6-source> <v6-group> } } { nh-if <if-name> | nh-sw <switch-id> } { [ WC_SRC ] [ WC_GRP ] [ NH_EXCLUDE ] [ FLOOD_TO_VLAN ] [ LOCAL ] [ REMOTE ] [ IGNORE_STAR ] } + [ proto <proto> ] [ route-type <route-type> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

gr-route

Perform group route operations on m2rib

add

Add a route next-hop

del

Delete a route next-hop

proto

(Optional) Protocol owning this next-hop

route-type

(Optional) Route type of this next-hop

nh-if

next-hop interface

nh-sw

next-hop switch

vlan

vlan key

v4-source

IPv4 Multicast traffic source

v4-group

IPv4 Multicast Group address

if-name

Specify the next hop interface

switch-id

Specify the next hop switch id

WC_SRC

(Optional) Source is wildcarded

WC_GRP

(Optional) Group is wildcarded

NH_EXCLUDE

(Optional) Next-hop excluded from ltl+1

FLOOD_TO_VLAN

(Optional) Broadcast (flood-to-vlan) special group

LOCAL

(Optional) Local members exist

REMOTE

(Optional) Remote members exist

IGNORE_STAR

(Optional) Do not combine with router-port oif list

proto

(Optional) Protocol owner id

route-type

(Optional) Route type

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

- /exec

m2rib debug log-size event-history

m2rib debug log-size event-history { <size> | small | medium | large }

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

log-size

Set log sizes

event-history

Set event-history size

size

Buffer size in KB

small

Set to default small log size

medium

Set to default medium log size

large

Set to default large log size

Command Mode

- /exec/configure

m2rib debug log-size transactions

m2rib debug log-size transactions { { received | u2rib | mfdm | pixm | eltm } [ error-log ] | announced } { <size> | small | medium | large } <size_bytes>

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

log-size

Set log sizes

transactions

Set transaction log sizes

received

Set received transaction log size

announced

Set announced transaction log size

u2rib

Set U2RIB transaction log size

mfdm

Set MFDM transaction log size

pixm

Set PIXM transaction log size

eltm

Set ELTM transaction log size

error-log

(Optional) errors only log

size

Size in number of transactions

small

Set number of transactions default small log size (0 disables limits)

medium

Set numbser of transactions default medium log size

large

Set number of transactions default large log size

size_bytes

Max log size in number of bytes

Command Mode

- /exec/configure

m2rib debug omf enable

m2rib debug omf { enable | disable } <from-vlan> <to-vlan> [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

omf

Enable or disable Optimized Multicast Flood (OMF)

enable

Enable OMF

disable

Disable OMF

from-vlan

from vlan

to-vlan

to vlan

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

- /exec

m2rib debug pkt-recv enable

m2rib debug pkt-recv { enable | disable } <from-vlan> <to-vlan> <proto> [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

pkt-recv

Enable or disable protocol packet reception

enable

Enable packet receive

disable

Disable packet receive

from-vlan

from vlan

to-vlan

to vlan

proto

Protocol id

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

- /exec

m2rib debug swroute nh

m2rib debug swroute { add | mod | del } <ftag> <switch-id> nh <if-name> [ proto <proto> ] [ route-type <route-type> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

swroute

Perform route operations on m2rib

add

Add a route next-hop

mod

Modify a route's next-hop

del

Delete a route next-hop

nh

next-hop

proto

(Optional) Protocol owning this next-hop

route-type

(Optional) Route type of this next-hop

ftag

ftag key

switch-id

switch id

if-name

Specify the next hop interface

proto

(Optional) Protocol owner id

route-type

(Optional) Route type

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

- /exec

m2rib debug topo

m2rib debug topo { create | del | add-vlans | del-vlans } <topo-id> <from-vlan> <to-vlan> [ <proto> ] [ vampire-tap ]

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

topo

Configure M2RIB's topo db

create

Create a topo in m2rib

del

Delete a topo in m2rib

add-vlans

Add vlans to an existing topo

del-vlans

Delete vlans from an existing topo

topo-id

topo id

from-vlan

from vlan

to-vlan

to vlan

proto

(Optional) Protocol owner id

vampire-tap

(Optional) Send a copy of all M2RIB generated messages to CLI

Command Mode

- /exec

m2rib debug topo loop-flush-timeout

m2rib debug topo [ <topo-id> ] loop-flush-timeout <timeout>

Syntax Description

m2rib

Configure m2rib

debug

Configure m2rib debug

topo

configure M2RIB's topology db

topo-id

(Optional) topo id

loop-flush-timeout

configure the loop flush timer value

timeout

Loop flush timeout value in ms

Command Mode

- /exec/configure

m6rib mfdm-ack-delay

[no] m6rib mfdm-ack-delay <ms>

Syntax Description

no

(Optional) Negate a command or set its defaults

m6rib

Artificially slow MFDM down

mfdm-ack-delay

Set ack delay in MRIB's MFDM thread

ms

Delay MFDM acks, in milliseconds

Command Mode

- /exec

mac-address

mac-address <macaddress> | no mac-address [ <macaddress> ]

Syntax Description

no

Negate a command or set its defaults

mac-address

Virtual MAC address

macaddress

MAC address(FORMAT:xxxx.xxxx.xxxx)

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

mac-address

mac-address <mac_address_val> | no mac-address [ <mac_address_val> ]

Syntax Description

no

Negate a command or set its defaults

mac-address

Configure interface mac address (1)

mac_address_val

Static Router MAC address (1)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-ether-sub /exec/configure/if-eth-non-member /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel /exec/configure/if-port-channel-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-ethernet-p2p

mac-address

mac-address <mac-addr> | no mac-address

Syntax Description

no

Negate a command or set its defaults

mac-address

Manually set interface MAC address

mac-addr

MAC address

Command Mode

- /exec/configure/if-vlan-common

mac-address destination

{ mac-address { destination | source } <addr> } | { no mac-address { destination | source } }

Syntax Description

no

Negate a command or set its defaults

mac-address

specify flow mac address

source

specify flow source mac address

destination

specify flow destination mac address

addr

mac address

Command Mode

- /exec/configure/configngoamprofileflow

mac-address ipv6-extract

mac-address ipv6-extract | no mac-address ipv6-extract

Syntax Description

no

Negate a command or set its defaults

mac-address

Configure interface mac address (3)

ipv6-extract

Extract mac-address (3) from the IPv6 address configured on the interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-ether-sub /exec/configure/if-eth-non-member /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel-sub /exec/configure/if-port-channel

mac-learn disable

mac-learn disable | no mac-learn disable

Syntax Description

no

Negate a command or set its defaults

mac-learn

Mac Learning disable/enable

disable

Mac Learning disable to use switch as a HUB. Do a clear mac address-table dynamic after disabling mac learning

Command Mode

- /exec/configure

mac-learn disable

mac-learn disable | no mac-learn disable

Syntax Description

no

Negate a command or set its defaults

mac-learn

Mac Learning disable/enable on vlan

disable

Mac Learning disable on vlan

Command Mode

- /exec/configure/vlan-config

mac-list permit

{ mac-list <name> [ seq <seq> ] { permit | deny } <mac-addr> [ <mac-mask> ] } | { no mac-list <name> [ seq <seq> ] [ { permit | deny } <mac-addr> [ <mac-mask> ] ] }

Syntax Description

no

Negate a command or set its defaults

mac-list

Build a mac list

name

Name of prefix list

seq

(Optional) Sequence number of an entry

seq

(Optional) Sequence number

permit

Specify routes to forward

deny

Specify routes to reject

mac-addr

MAC address

mac-mask

(Optional) MAC Mask. Default Mask is ffff.ffff.ffff

Command Mode

- /exec/configure

mac access-list

[no] mac access-list <name> [ client <clienttype> <clientID> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

access-list

Configure access list

name

List name

client

(Optional) set client type

clienttype

(Optional) CLI/ONEP

clientID

(Optional) client appID

Command Mode

- /exec/configure

mac address-table aging-time

mac address-table aging-time { <disable> | <seconds> } [ __readonly__ <info_str> ] | no mac address-table aging-time [ [ <disable> | <seconds> ] ]

Syntax Description

no

Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

aging-time

Aging time

disable

0 disables aging

seconds

Aging time in seconds.

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

- /exec/configure

mac address-table core-port-learning

mac address-table core-port-learning [ __readonly__ <info_str> ] | no mac address-table core-port-learning

Syntax Description

no

Negate a command

mac

MAC configuration commands

address-table

MAC Address Table

core-port-learning

Trill Learning for F-PATH VLANS

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

- /exec/configure

mac address-table guard-vpc-peergw-mac

[no] mac address-table guard-vpc-peergw-mac

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC

address-table

MAC Address Table

guard-vpc-peergw-mac

Prevent vPC Peer gateway MAC Spoofing

Command Mode

- /exec/configure

mac address-table limit system

mac address-table limit { system | vlan <id> } [ <limitcount> ] [ __readonly__ <info_str> ] | no mac address-table limit { system | vlan <id> } [ <limitcount> ]

Syntax Description

no

Negate a command or set its defaults

mac

Mac configuration commands

address-table

MAC Address Table

limit

Restrict number of Mac addresses learnt

system

System-wide

vlan

VLAN

id

List of VLAN ids

limitcount

(Optional) Mac address limit count

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

- /exec/configure

mac address-table loop-detect port-down

mac address-table loop-detect port-down | no mac address-table loop-detect port-down

Syntax Description

no

Negate a command or set its defaults

mac

MAC

address-table

MAC Address Table

loop-detect

Action for Mac loop detection

port-down

Take port-down action for mac loop detection

Command Mode

- /exec/configure

mac address-table multicast vlan interface

[no] mac address-table multicast <mac-address> { vlan <vlan> | bridge-domain <bdid> } interface [ vsi ] <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

multicast

mcast mac OIF Static Entry

mac-address

mcast MAC Address, not in Unicast IP Range

vlan

VLAN

vlan

VLAN

bridge-domain

BD

bdid

BD

interface

Interface

vsi

(Optional) Specify if this interface is a VSI

interface

Interface name

Command Mode

- /exec/configure

mac address-table notification mac-move

mac address-table notification mac-move | no mac address-table notification mac-move

Syntax Description

no

Negate a command

mac

MAC configuration commands

address-table

MAC Address Table

notification

Notify of mac-move

mac-move

MAC move notification on syslog

Command Mode

- /exec/configure

mac address-table notification threshold

mac address-table notification threshold [ limit <percentage> interval <seconds> ] | no mac address-table notification threshold

Syntax Description

no

Negate a command

mac

MAC configuration commands

address-table

MAC Address Table

notification

Notify of mac-move

threshold

MAC Address Table threshold notification

limit

(Optional) Specify the percentage limit beyond which notifications are enabled

percentage

(Optional) Percentage of MAC Table Consumption

interval

(Optional) Minimum time in seconds between two notifications

seconds

(Optional) Interval time in seconds

Command Mode

- /exec/configure

mac address-table static vlan interface

mac address-table static <mac-address> vlan <vlan-id> { interface <interface-name> | drop } [ auto-learn ] [ __readonly__ <info_str> ] | no mac address-table static <mac-address> vlan <vlan-id>

Syntax Description

no

Negate a command or set its defaults

mac

MAC configuration commands

address-table

MAC Address Table

static

Static Entry

mac-address

MAC Address

vlan

VLAN

vlan-id

VLAN ID

interface

Interface

interface-name

Interface name

drop

Drop all traffic

auto-learn

(Optional) Allow moving this MAC address

__readonly__

(Optional)

info_str

(Optional) Information

Command Mode

- /exec/configure

mac address-table static vni

mac address-table static <mac-address> vni <vni-id>

Syntax Description

mac

MAC configuration commands

address-table

MAC Address Table

static

Static Entry

mac-address

MAC Address

vni

Virtual Network Identifier

vni-id

VNI ID

Command Mode

- /exec/configure

mac address

[no] mac address { <macaddr> }

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

Configure vMAC address options for Pathway

address

Pathway will use a specified vMAC address

macaddr

48-bit MAC address in HEX

Command Mode

- /exec/configure/if-eth-any/vrrs

mac address inherit

mac address inherit

Syntax Description

mac

Configure vMAC address options for Pathway

address

Pathway will use a specified vMAC address

inherit

Pathway will inherit vMAC

Command Mode

- /exec/configure/if-eth-any/vrrs

mac advert interval

[no] mac advert interval | mac advert interval <macint>

Syntax Description

no

Negate a command or set its defaults

mac

Configure vMAC address options for Pathway

advert

Specify vMAC unsolicited advertisements

interval

Specify interval between vMAC unsolicited advertisements

macint

Advertisement Interval in seconds

Command Mode

- /exec/configure/if-eth-any/vrrs

mac packet-classify

[no] mac packet-classify

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

packet-classify

Force mac classification of packets

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-all

mac port access-group

[no] mac port access-group <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

mac

MAC configuration commands

port

Port policy

access-group

Specify access control for packets

name

List name

Command Mode

- /exec/configure/if-set-acl-l2

macsec keychain

[no] macsec keychain <keychain_name> [ policy <policy_name> ]

Syntax Description

macsec

Specify MKA keychain and MACsec policy

keychain

key chain

keychain_name

name of the keychain specified as a string

policy

(Optional) policy

policy_name

(Optional) name of the policy specified as a string

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

macsec policy

[no] macsec policy <policy_name>

Syntax Description

macsec

Configure MACSEC

policy

Configure MACSEC policy

policy_name

Name of Policy

Command Mode

- /exec/configure

management

[no] management

Syntax Description

no

(Optional) Negate a command or set its defaults

management

Allow in-band management access to VLAN Interface IP address

Command Mode

- /exec/configure/if-vlan-common

map-notify-group

{ [ no ] map-notify-group { <addr> | <addr6> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

map-notify-group

Group address to send and receive site specific Map-Notify messages

addr

IPv4 group address

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

map-server key

{ { [ no ] map-server { <ms> | <ms6> } [ key-type { sha1 | sha2 } ] key <key> } | { [ no ] map-server { <ms> | <ms6> } proxy-reply } }

Syntax Description

no

(Optional) Negate a command or set its defaults

map-server

To interact with Map-Server

ms

Address of IPv4 map-server

key-type

(Optional) Authentication key type, either sha1 or sha2

sha1

(Optional) Use sha1 authenication in Map-Register messages

sha2

(Optional) Use sha2 authenication in Map-Register messages

key

Authentication key used with Map-Server

key

SHA-1 password key

proxy-reply

Request Map-Server to send Map-Replies on behalf of dynamic-EID

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

marker-packet

[no] marker-packet [ <interval> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

marker-packet

Enable/Disable send marker packet

interval

(Optional) range between <100-1000> ms default 100 ms

Command Mode

- /exec/configure/config-monitor-erspan-src

master ipv4

[no] master ipv4 <ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

master

master

ipv4

ipv4

ip

IPv4 address (A.B.C.D) of slave

Command Mode

- /exec/configure/ptp-ucast-slave

match-address

[no] match-address

Syntax Description

no

(Optional) Negate a command or set its defaults

match-address

Match addresses in advertisement packets

Command Mode

- /exec/configure/if-eth-any/vrrpv3

match

[no] match { { access-group name <acl-name> } | [ not ] { { cos <cos-value> } | any | { eth-src <mac_src> <mac_src_wild> } | { eth-dest <mac_dest> <mac_dest_wild> } | { eth-type <eth-value> } | { vlan <vlan-number> } | { ip-tos <tos-value> <tos-mask> } | { ip-protocol <ip-protocol-value> } | { ip-src-addr <ip-s-addr> <ip-s-mask> } | { ip-dst-addr <ip-d-addr> <ip-d-mask> } | { tcp-src-port <tcp-src-port-addr> } | { tcp-dst-port <tcp-dest-port-addr> } | { udp-src-port <udp-src-port-addr> } | { udp-dst-port <udp-dest-port-addr> } | { input-interface <ifnum> } | { ipv6-src-addr <ipv6-s-addr> <ipv6-s-mask> } | { ipv6-dst-addr <ipv6-d-addr> <ipv6-d-mask> } | { ipv6-protocol <ipv6-protocol-value> } | { ipv6-flowlabel <ipv6-flowlabel-value> } | { icmpv6-type <icmpv6-type-value> } | { icmpv6-code <icmpv6-code-value> } | { ipv4-dscp <ipv4-dscp-list> } | { ipv6-dscp <ipv6-dscp-list> } | { dscp { <dscp-list> | <dscp-enum> } + } | { precedence { <precedence-list> | <prec-enum> } + } | { discard-class <discard-class-list> } | { qos-group <qos-group-list> } | { class-map <cmap-name-plc> } | { protocol <protocol-enum> } | { packet length <len-list> } | { ip rtp <port-list> } | { mpls experimental topmost <exp-list> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

not

(Optional) Negate this match result

access-group

Access group

name

Named Access List

acl-name

Access List name

cos

IEEE 802.1Q class of service

dscp

DSCP in IP(v4) and IPv6 packets

dscp-list

List of DSCP values

dscp-enum

precedence

Precedence in IP(v4) and IPv6 packets

precedence-list

List of precedence values

prec-enum

discard-class

Discard class

discard-class-list

List of discard-class values

qos-group

Qos-group

qos-group-list

List of qos-group values

class-map

Class map

cmap-name-plc

Match class-map name

protocol

Protocol

protocol-enum

packet

Packet

length

Length of IP datagram

len-list

list of IP packet length

ip

IP

rtp

Real Time Protocol

port-list

UDP port list that are using RTP

mpls

Match on MPLS label

experimental

Match on MPLS Experimental label

topmost

Match on topmost MPLS label

exp-list

List of MPLS exp values

any

Match on Any Filter

eth-dest

Match on Layer 2 destination MAC address

eth-src

Match on Layer 2 source MAC address

eth-type

Match on Ether type

vlan

Match on 802.1Q vlan

ip-tos

Match on IPv4 TOS

ip-protocol

Match on IP protocol

ip-src-addr

Match on IPv4 source address

ip-dst-addr

Match on IPv4 destination address

ipv6-src-addr

Match on IPv6 source address

ipv6-dst-addr

Match on IPv6 destination address

tcp-src-port

Match on TCP source port

tcp-dst-port

Match on TCP source port

udp-src-port

Match on UDP source port

udp-dst-port

Match on UDP source port

input-interface

Match on physical input interface

ipv6-protocol

Match on IPv6 Protocol Value

ipv6-flowlabel

Match on IPv6 Flowlabel

icmpv6-type

Match on ICMPv6 Message Type

icmpv6-code

Match on ICMPv6 Message Code

ipv4-dscp

Match on DSCP for IPV4 Packets

ipv6-dscp

Match on DSCP for IPV6 Packets

cos-value

class of service Value

mac_src

Source MAC address

mac_src_wild

Source MAC mask

mac_dest

Destination MAC address

mac_dest_wild

Destination MAC mask

eth-value

Ethernet type

vlan-number

Vlan number

tos-value

IPv4 TOS

tos-mask

IPV4 TOS Mask for DSCP

ip-protocol-value

IPV4 protocol

ip-s-addr

IPV4 address in format a.b.c.d

ip-d-addr

IPV4 address in format a.b.c.d

ip-s-mask

IPV4 address Mask in format a.b.c.d

ip-d-mask

IPV4 address Mask in format a.b.c.d

tcp-src-port-addr

Transport layer port number

tcp-dest-port-addr

Transport layer port number

udp-src-port-addr

Transport layer port number

udp-dest-port-addr

Transport layer port number

ifnum

Physical interface Name and Number

ipv6-protocol-value

IPv6 Protocol Value

ipv6-flowlabel-value

IPv6 Flowlabel

icmpv6-type-value

ICMPv6 Message Type

icmpv6-code-value

ICMPv6 Message Code

ipv4-dscp-list

List of IPV4 DSCP values

ipv6-dscp-list

List of IPV6 DSCP values

Command Mode

- /exec/configure/class-map/type/plc

match

[no] match { { access-group name <acl-name> } | [ not ] { dscp { <dscp-list> | { <dscp-enum> } + } | { { packet length <len-list> | ip rtp <port-list> } [ replace ] } | { cos <cos-list> } | { qos-group <qos-group-list> } | { precedence { <precedence-list> | { <prec-enum> } + } } | { protocol <protocol-enum> } | { mpls experimental topmost <exp-list> } } }

Syntax Description

dscp-list

<dscp-enum>

cos-list

precedence-list

<prec-enum>

no

(Optional) Negate a command or set its defaults

replace

(Optional) Replace current ip rtp / packet length configuration

match

Classification criteria

not

(Optional) Negate this match result

access-group

Access group

name

Named Access List

acl-name

Access List name

dscp

DSCP in IP(v4) and IPv6 packets

dscp-enum

cos

IEEE 802.1Q Class of Service

qos-group

Qos-group

qos-group-list

List of qos-group values

precedence

Precedence in IP(v4) and IPv6 packets

prec-enum

protocol

Protocol

protocol-enum

packet

Packet

length

Length of IP datagram

len-list

List of IP packet length

ip

IP

rtp

Real Time Protocol

port-list

UDP port list that are using RTP

mpls

Match on MPLS label

experimental

Match on MPLS Experimental label

topmost

Match on topmost MPLS label

exp-list

List of MPLS exp values

Command Mode

- /exec/configure/class-map

match

[no] match { [ not ] { { discard-class <discard-class-list> } | { class-map <cmap-name> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

not

(Optional) Negate this match result

discard-class

Discard class

discard-class-list

List of discard-class values

class-map

Class map

cmap-name

Match class-map name

Command Mode

- /exec/configure/class-map

match access-group name

[no] match access-group name <acs-grp-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

access-group

Match with given access group

name

Name of the access group

acs-grp-name

Match parameter for class-map

Command Mode

- /exec/configure/cmap

match address

[no] match <ip_ipv6_mac> address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Specify the match clause

ip_ipv6_mac

IP/IPv6/MAC

address

Match an access list

name

List name

Command Mode

- /exec/configure/vacl

match as-number

[no] match as-number [ { <asnum> | <asnum_range> } + ] { <asnum_trail> | <asnum_range_trail> }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

as-number

Match BGP peer AS number

asnum

(Optional) <AA4>,

asnum_range

(Optional) <AA4>-<AA4>,

asnum_trail

<AA4>,

asnum_range_trail

<AA4>-<AA4>,

Command Mode

- /exec/configure/route-map

match as-number as-path-list

match as-number as-path-list <aspl-name> + | no match as-number as-path-list { <aspl-name> | <aspl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

as-number

Match BGP peer AS number

as-path-list

AS-path access-list

aspl-name

AS path access list name

aspl-name

AS path access list name

aspl-name

Known as-path access-list name

Command Mode

- /exec/configure/route-map

match as-path

match as-path <aspl-name> + | no match as-path { <aspl-name> | <aspl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

as-path

Match BGP AS path list

aspl-name

AS path access list name

aspl-name

AS path access list name

aspl-name

Known as-path access-list name

Command Mode

- /exec/configure/route-map

match class-map

[no] match class-map <cmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

class-map

Class map

cmap-name

class map name

Command Mode

- /exec/configure/class-map/type/queuing

match community

[no] match community <name> + [ exact-match ]

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

community

Match BGP community list

name

Community list name

exact-match

(Optional) Do exact matching of communities

Command Mode

- /exec/configure/route-map

match cos

[no] match cos <cos-list>

Syntax Description

cos-list

no

(Optional) Negate a command or set its defaults

match

Classification criteria

cos

IEEE 802.1Q Class of Service

Command Mode

- /exec/configure/class-map/type/queuing

match cos

[no] match cos <cos-list>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

cos

IEEE 802.1Q class of service

cos-list

List of class-of-service values

Command Mode

- /exec/configure/class-map/type/uf

match datalink

[no] match datalink { mac source-address | mac destination-address | ethertype | vlan }

Syntax Description

match

Specify a key field

datalink

datalink (Layer 2) attributes

mac

MAC Address

source-address

Source MAC Address

destination-address

Destination MAC Address

ethertype

Ethertype

vlan

VLAN ID

Command Mode

- /exec/configure/nfm-record

match dscp

[no] match dscp { <dscp-list> } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

dscp

DSCP in IP(v4) packets

dscp-list

List of DSCP values

Command Mode

- /exec/configure/class-map/type/queuing

match dscp

[no] match dscp { <dscp-list> | <dscp-enum> } +

Syntax Description

dscp-list

<dscp-enum>

no

(Optional) Negate a command or set its defaults

match

Classification criteria

dscp

DSCP in IP(v4) and IPv6 packets

dscp-enum

Command Mode

- /exec/configure/color-cmap

match exception

[no] match exception { { { ip | ipv6 } { option | { icmp { redirect | unreachable } } | municast } } | ttl-failure | glean | mtu-failure | nat-flow | sflow | { multicast { rpf-failure | sg-rpf-failure | dest-miss | ipv6-rpf-failure | ipv6-sg-rpf-failure | ipv6-dest-miss } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

exception

Match exception packets

ip

ipv4 match criteria

ipv6

ipv6 match criteria

option

Match ip/ipv6 option exception packets

icmp

Icmp redirect packets

redirect

Send redirected packets back to sender

unreachable

Send unreachable packets back to sender

municast

IP unicast packets with multicast MAC

ttl-failure

Failed in ttl

mtu-failure

mtu-failure

glean

Glean packets

multicast

multicast packets

rpf-failure

multicast rpf check failure

sg-rpf-failure

multicast sg rpf check failure

dest-miss

L3 multicast destination lookup failure

ipv6-rpf-failure

IPv6 multicast rpf check failure

ipv6-sg-rpf-failure

IPv6 multicast sg rpf check failure

ipv6-dest-miss

IPv6 L3 multicast destination lookup failure

nat-flow

ipv4 software nat flow packets

sflow

sflow packets

Command Mode

- /exec/configure/cmap

match extcommunity

[no] match extcommunity <name> + [ exact-match ]

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

extcommunity

Match BGP community list

name

Extended Community list name

exact-match

(Optional) Do exact matching of extended communities

Command Mode

- /exec/configure/route-map

match interface

[no] match interface <name> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

interface

Match first hop interface of route

name

Interface name

Command Mode

- /exec/configure/route-map

match ip address

[no] match ip address <name> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

address

Match address of route or match packet

name

IP access-list name (for use in route-maps for PBR only)

Command Mode

- /exec/configure/route-map

match ip address prefix-list

match ip address prefix-list <ipv4-pfl-name> + | no match ip address prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

address

Match address of route or match packet

prefix-list

Match entries of prefix-lists

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

Command Mode

- /exec/configure/route-map

match ip multicast rp

{ match ip multicast { { rp <iprp> [ rp-type <iprptype> ] } | { group <gprefix> } | { source <ipsrc> } } + } | { match ip multicast { { rp <iprp> [ rp-type <iprptype> ] } | { group-range <gaddr_start> to <gaddr_end> } | { source <ipsrc> } } + } | { no match ip multicast }

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

multicast

Match multicast attributes

rp

Rendezvous point

iprp

IPv4 rendezvous prefix

rp-type

(Optional) Multicast rendezvous point type

iprptype

(Optional) IPv4 rendezvous point type

group

Multicast Group prefix

gprefix

IPv4 group prefix

group-range

Multicast Group address range

gaddr_start

First Group address

to

Range

gaddr_end

Last Group address

source

Multicast source address

ipsrc

IPv4 source prefix

Command Mode

- /exec/configure/route-map

match ip next-hop prefix-list

match ip next-hop prefix-list <ipv4-pfl-name> + | no match ip next-hop prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

next-hop

Match next-hop address of route

prefix-list

Match entries of prefix-lists

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

Command Mode

- /exec/configure/route-map

match ip protocol

[no] match ip { protocol | tos }

Syntax Description

match

Specify a key field

ip

IP attributes

protocol

Protocol

tos

TOS

Command Mode

- /exec/configure/nfm-record

match ip route-source prefix-list

match ip route-source prefix-list <ipv4-pfl-name> + | no match ip route-source prefix-list { <ipv4-pfl-name> | <ipv4-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ip

Configure IP features

route-source

Match advertising source address of route

prefix-list

Match entries of prefix-lists

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Name of prefix-list

ipv4-pfl-name

Known prefix-list name

Command Mode

- /exec/configure/route-map

match ipv4 source address

[no] match ipv4 { source | destination } address

Syntax Description

match

Specify a key field

ipv4

IPv4 attributes

source

Source Address

destination

Destination Address

address

Address

Command Mode

- /exec/configure/nfm-record

match ipv6

[no] match ipv6 { { { source | destination } address } | { flow-label | options } }

Syntax Description

match

Specify a key field

ipv6

IPv6 attributes

source

Source Address

destination

Destination Address

address

Address

flow-label

Flow label

options

Options

Command Mode

- /exec/configure/nfm-record

match ipv6 address

[no] match ipv6 address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

address

Match address of route or match packet

name

IPv6 access-list name (for use in route-maps for PBR only)

Command Mode

- /exec/configure/route-map

match ipv6 address prefix-list

match ipv6 address prefix-list <ipv6-pfl-name> + | no match ipv6 address prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

address

Match address of route or match packet

prefix-list

Match entries of prefix-lists

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

Command Mode

- /exec/configure/route-map

match ipv6 multicast rp

{ match ipv6 multicast { { rp <ipv6rp> [ rp-type <ipv6rptype> ] } | { group <gprefix> } | { source <ipv6src> } } + } | { match ipv6 multicast { { rp <ipv6rp> [ rp-type <ipv6rptype> ] } | { group-range <gaddr_start> to <gaddr_end> } | { source <ipv6src> } } + } | { no match ipv6 multicast }

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

multicast

Match multicast attributes

rp

Rendezvous point

rp-type

(Optional) Multicast rendezvous point type

ipv6rptype

(Optional) IPv6 rendezvous point type

group

Multicast group address

group-range

Multicast Group address range

to

Range

source

Multicast source address

Command Mode

- /exec/configure/route-map

match ipv6 next-hop prefix-list

match ipv6 next-hop prefix-list <ipv6-pfl-name> + | no match ipv6 next-hop prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

next-hop

Match next-hop address of route

prefix-list

Match entries of prefix-lists

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

Command Mode

- /exec/configure/route-map

match ipv6 route-source prefix-list

match ipv6 route-source prefix-list <ipv6-pfl-name> + | no match ipv6 route-source prefix-list { <ipv6-pfl-name> | <ipv6-pfl-name> } +

Syntax Description

no

Negate a command or set its defaults

match

Match values from routing table

ipv6

Configure IPv6 features

route-source

Match advertising source address of route

prefix-list

Match entries of prefix-lists

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Name of prefix-list

ipv6-pfl-name

Known prefix-list name

Command Mode

- /exec/configure/route-map

match metric

[no] match metric { <measure> [ <plus-minus> <deviation> ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

metric

Match metric of route

plus-minus

(Optional) +-

measure

Metric value

deviation

(Optional) Deviation value

Command Mode

- /exec/configure/route-map

match ospf-area

[no] match ospf-area <area> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

ospf-area

Match ospf area

area

area id

Command Mode

- /exec/configure/route-map

match protocol

[no] match protocol { fcoe | iscsi | tcp }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

protocol

Protocol

fcoe

FCoE

iscsi

ISCSI

tcp

TCP

Command Mode

- /exec/configure/class-map/type/uf

match protocol arp

[no] match protocol { arp | mpls [ router-alert | exp <exp_value> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

protocol

Protocol

arp

IP ARP

mpls

Multi-protocol Label Switching

router-alert

(Optional) Match packets with router-alert label set to 1 for OTV Overlay frames

exp

(Optional) Match packets on MPLS exp bits

exp_value

(Optional) Exp bits value

Command Mode

- /exec/configure/cmap

match qos-group

[no] match qos-group <qos-group-list>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group

QoS Group

qos-group-list

List of qos-group values

Command Mode

- /exec/configure/class-map/type/uf

match qos-group2

[no] match qos-group2 <qos-group-list>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group2

QoS Group

qos-group-list

Qos-group value

Command Mode

- /exec/configure/class-map/type/uf

match qos-group2

[no] match qos-group2 { <qos-group-list> }

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group2

QoS Group

qos-group-list

List of qos-group values

Command Mode

- /exec/configure/class-map/type/queuing

match qos-group

[no] match qos-group { <qos-group-list> } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

qos-group

QoS Group

qos-group-list

List of qos-group values

Command Mode

- /exec/configure/class-map/type/queuing

match redirect

[no] match redirect <opt_match_redirect>

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Classification criteria

redirect

Match redirected packets

opt_match_redirect

Match criteria for redirected packets

Command Mode

- /exec/configure/cmap

match route-type

[no] match route-type { external | internal | level-1 | level-2 | local | nssa-external | type-1 | type-2 | inter-area | intra-area } +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

route-type

Match route-type of route

external

external route (BGP, EIGRP and OSPF type 1/2)

internal

internal route (including OSPF intra/inter area)

level-1

IS-IS level-1 route

level-2

IS-IS level-2 route

local

locally generated route

nssa-external

nssa-external route (OSPF type 1/2)

type-1

OSPF external type 1 route

type-2

OSPF external type 2 route

inter-area

OSPF inter area route

intra-area

OSPF intra area route

Command Mode

- /exec/configure/route-map

match source-protocol

[no] match source-protocol <src_prot> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

source-protocol

Match source protocol

src_prot

Protocol instance name

Command Mode

- /exec/configure/route-map

match tag

[no] match tag <tagid> +

Syntax Description

no

(Optional) Negate a command or set its defaults

match

Match values from routing table

tag

Match tag of route

tagid

Tag value

Command Mode

- /exec/configure/route-map

match transport destination

[no] match transport { destination-port | source-port }

Syntax Description

match

Specify a key field

transport

Transport layer fields

destination-port

Transport destination port

source-port

Transport source port

Command Mode

- /exec/configure/nfm-record

max-lsa

[no] max-lsa <maximum-number> [ <threshold> ] [ warning-only | [ ignore-time <ignore-time-minutes> ] [ ignore-count <ignore-count-number> ] [ reset-time <reset-time-minutes> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-lsa

Feature to limit the number of non-self-originated LSAs

maximum-number

Set maximum number of non self-generated LSAs

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

ignore-time

(Optional) Set time during which all adjacencies are suppressed

ignore-time-minutes

(Optional) ignore-time in minutes

ignore-count

(Optional) Set count on how many times adjacencies can be suppressed

ignore-count-number

(Optional) ignore-count

reset-time

(Optional) Set number of minutes after which ignore-count is reset to zero

reset-time-minutes

(Optional) reset-time in minutes

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

max-lsa

[no] max-lsa <maximum-number> [ <threshold> ] [ warning-only | [ ignore-time <ignore-time-minutes> ] [ ignore-count <ignore-count-number> ] [ reset-time <reset-time-minutes> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-lsa

Feature to limit the number of non-self-originated LSAs

maximum-number

Set maximum number of non self-generated LSAs

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

ignore-time

(Optional) Set time during which all adjacencies are suppressed

ignore-time-minutes

(Optional) ignore-time in minutes

ignore-count

(Optional) Set count on how many times adjacencies can be suppressed

ignore-count-number

(Optional) ignore-count

reset-time

(Optional) Set number of minutes after which ignore-count is reset to zero

reset-time-minutes

(Optional) reset-time in minutes

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

max-lsp-lifetime

max-lsp-lifetime <lifetime> | no max-lsp-lifetime [ <lifetime> ]

Syntax Description

no

Negate a command or set its defaults

max-lsp-lifetime

Set maximum LSP lifetime

lifetime

Maximum LSP lifetime in seconds

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

max-lsp-lifetime

max-lsp-lifetime <lifetime> | no max-lsp-lifetime [ <lifetime> ]

Syntax Description

no

Negate a command or set its defaults

max-lsp-lifetime

Set maximum LSP lifetime

lifetime

Maximum LSP lifetime in seconds

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

max-lsp-lifetime

max-lsp-lifetime <lifetime> | no max-lsp-lifetime [ <lifetime> ]

Syntax Description

no

Negate a command or set its defaults

max-lsp-lifetime

Set maximum LSP lifetime

lifetime

Maximum LSP lifetime in seconds

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

max-metric router-lsa

[no] max-metric router-lsa [ external-lsa [ <max-metric-extlsa> ] ] [ include-stub ] [ on-startup [ <timeout> ] [ wait-for bgp <as> ] ] [ summary-lsa [ <max-metric-sumlsa> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-metric

Maximize the cost metric

router-lsa

Router LSA

external-lsa

(Optional) External LSAs

max-metric-extlsa

(Optional) Max metric value for external LSAs

include-stub

(Optional) Advertise Max metric for Stub links as well

on-startup

(Optional) Effective only at startup

timeout

(Optional) Wait period in seconds after startup

wait-for

(Optional) Wait for an event to advertise normal metric

bgp

(Optional) BGP Convergence

as

(Optional) ASN of BGP to wait for

summary-lsa

(Optional) Summary LSAs

max-metric-sumlsa

(Optional) Max metric value for summary LSAs

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

max-metric router-lsa

[no] max-metric router-lsa [ external-lsa [ <max-metric-extlsa> ] ] [ stub-prefix-lsa ] [ on-startup [ <timeout> ] [ wait-for bgp <as> ] ] [ inter-area-prefix-lsa [ <max-metric-sumlsa> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

max-metric

Maximize the cost metric

router-lsa

Router LSA

external-lsa

(Optional) External LSAs

max-metric-extlsa

(Optional) Max metric value for external LSAs

stub-prefix-lsa

(Optional) Advertise Max metric for Stub links as well

on-startup

(Optional) Effective only at startup

timeout

(Optional) Wait period in seconds after startup

wait-for

(Optional) Wait for an event to advertise normal metric

bgp

(Optional) BGP Convergence

as

(Optional) ASN of BGP to wait for

inter-area-prefix-lsa

(Optional) Inter-area-prefix LSAs

max-metric-sumlsa

(Optional) Max metric value for summary LSAs

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

max-ports

[no] [ vmware ] max-ports

Syntax Description

no

Negate a command or set its defaults

vmware

(Optional) VMware configuration

max-ports

Max ports on which this profile can be inherited

Command Mode

- /exec/configure/port-profile

max-ports

[ vmware ] max-ports <i0>

Syntax Description

vmware

(Optional) VMware configuration

max-ports

Max ports on which this profile can be inherited

i0

Enter the max-number of ports

Command Mode

- /exec/configure/port-profile

maxas-limit

maxas-limit <as-limit> | no maxas-limit [ <as-limit> ]

Syntax Description

no

Negate a command or set its defaults

maxas-limit

Allow AS-PATH attribute from EBGP neighbor imposing a limit on number of ASes

as-limit

Number of ASes in the AS-PATH attribute

Command Mode

- /exec/configure/router-bgp/vrf-cmds

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

- /exec/configure/router-ospf

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

RIP set maximum paths per route

max-paths

Maximum paths per prefix

Command Mode

- /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Set maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv6

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

maximum-paths

{ { maximum-paths <num-paths> } | { no maximum-paths [ <num-paths> ] } }

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Forward packets over multiple paths

num-paths

Number of paths

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

maximum-paths

maximum-paths [ ibgp ] <mpath-count> | no maximum-paths [ ibgp ] [ <mpath-count> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Forward packets over multipath paths

ibgp

(Optional) Configure multipath for IBGP paths

mpath-count

Number of parallel paths

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

maximum-paths

maximum-paths <max-paths> | no maximum-paths [ <max-paths> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Set maximum paths per destination

max-paths

Maximum paths per destination

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

maximum-paths eibgp

maximum-paths eibgp <mpath-count> | no maximum-paths eibgp [ <mpath-count> ]

Syntax Description

no

Negate a command or set its defaults

maximum-paths

Forward packets over multipath paths

eibgp

Configure multipath for both EBGP and IBGP paths

mpath-count

Number of parallel paths

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6 /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6

maximum-peers

{ maximum-peers <limit> | no maximum-peers [ <limit> ] }

Syntax Description

no

Negate a command or set its defaults

maximum-peers

Maximum number of peers for this prefix

limit

Max. peers limit

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-prefix

maximum-prefix

maximum-prefix <limit> [ <percent> ] [ restart <restart-time> | warning-only ] | { no | default } maximum-prefix [ <limit> [ <percent> ] [ restart <restart-time> | warning-only ] ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

maximum-prefix

Maximum number of prefixes from this neighbor

limit

Max. prefix limit

percent

(Optional) Threshold percentage at which to generate a warning

restart

(Optional) Restart bgp connection after limit is exceeded

restart-time

(Optional) Restart interval in minutes

warning-only

(Optional) Only give a warning message when limit is exceeded

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

maximum-prefix

{ { maximum-prefix <value> [ <threshold> ] [ warning-only ] [ restart <time1> ] [ restart-count <count> ] [ reset-time <time2> ] [ dampened ] } | { no maximum-prefix [ <value> [ <threshold> ] [ warning-only ] [ restart <time1> ] [ restart-count <count> ] [ reset-time <time2> ] [ dampened ] ] } }

Syntax Description

no

Negate a command or set its defaults

maximum-prefix

Maximum number of IP prefixes acceptable in aggregate

value

Number of IP prefixes for maximum-prefix limit

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Only give warning message when limit is exceeded

restart

(Optional) Duration for which a prefix source is ignored

time1

(Optional) Restart interval in minutes

restart-count

(Optional) Number of times sessions are auto-restarted

count

(Optional) Number of times

reset-time

(Optional) Duration after which restart history is cleared

time2

(Optional) Reset time in minutes

dampened

(Optional) Exponentially increase restart time interval

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

maximum-prefix

maximum-prefix <limit> [ <percent> ] [ restart <restart-time> | warning-only ] | { no | default } maximum-prefix [ <limit> [ <percent> ] [ restart <restart-time> | warning-only ] ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

maximum-prefix

Maximum number of prefixes from this neighbor

limit

Max. prefix limit

percent

(Optional) Threshold percentage at which to generate a warning

restart

(Optional) Restart bgp connection after limit is exceeded

restart-time

(Optional) Restart interval in minutes

warning-only

(Optional) Only give a warning message when limit is exceeded

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

maximum routes

[no] maximum routes <limit> [ { <warnlevel> [ reinstall <threshold> ] } | warning-only ]

Syntax Description

no

(Optional) Negate a command or set its defaults

maximum

Set a limit

routes

Maximum number of routes allowed in this routing table

limit

Maximum number of routes allowed

warnlevel

(Optional) Threshold value (%) at which to generate a warning msg

reinstall

(Optional) Reinstall previous rejected route due to over maximum route limit

threshold

(Optional) Threshold value (%) at which to reinstall routes back to VRF

warning-only

(Optional) Only give a warning message if limit is exceeded

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

mcast-group

mcast-group <maddr1> [ <maddr2> ] | no mcast-group

Syntax Description

no

Negate a command or set its defaults

mcast-group

NVE Multicast Group

maddr1

Multicast IP Prefix

maddr2

(Optional) Multicast IP Prefix

Command Mode

- /exec/configure/if-nve/vni

mcectest source

[no] mcectest source { <intf> | <ip-addr> }

Syntax Description

no

(Optional) Negate a command or set its defaults

mcectest

mcectest configuration commands

source

source of oob packets

intf

interface

ip-addr

IPv4 address (A.B.C.D)

Command Mode

- /exec/configure

mdix auto

{ mdix auto | no mdix [ auto ] }

Syntax Description

no

Negate a command or set its defaults

mdix

Enable auto mdix mode

auto

Enable auto mdix mode

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

mdt asm-use-shared-tree

[no] mdt asm-use-shared-tree

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

asm-use-shared-tree

Use (*,G) only state, no remote source state is created

Command Mode

- /exec/configure/vrf

mdt data

[no] mdt data <prefix> [ threshold <value> | immediate-switch ] [ route-map <policy-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

data

Configure settings for Data MDT

prefix

List of group range prefixes

threshold

(Optional) Data MDT switching threshold

immediate-switch

(Optional) Move to data mdt immediately if remote receiver exists

value

(Optional) Threshold in kilobits per sec

route-map

(Optional) Specify policy for creating Data MDTs

policy-name

(Optional) A route-map name

Command Mode

- /exec/configure/vrf

mdt data bidir-enable

[no] mdt data bidir-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

data

Configure settings for Data MDT

bidir-enable

Allow creation of data mdts for bidir customers

Command Mode

- /exec/configure/vrf

mdt data inhibit-reuse

[no] mdt data inhibit-reuse

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

data

Configure settings for Data MDT

inhibit-reuse

No reusing data mdts in the backbone network

Command Mode

- /exec/configure/vrf

mdt default

mdt default <mdt-default> | no mdt default [ <mdt-default> ]

Syntax Description

no

Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

default

The default group

mdt-default

IP multicast group address

Command Mode

- /exec/configure/vrf

mdt enforce-bgp-mdt-safi

[no] mdt enforce-bgp-mdt-safi

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

enforce-bgp-mdt-safi

Depend on BGP MDT SAFI for auto-discovery

Command Mode

- /exec/configure/vrf

mdt mtu

[no] mdt mtu <mtu-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

mtu

The MTU

mtu-value

MTU value

Command Mode

- /exec/configure/vrf

mdt pim hello-interval

[no] mdt pim hello-interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

pim

PIM protocol related parameters

hello-interval

Hello interval used between peers

interval

Interval in milliseconds

Command Mode

- /exec/configure/vrf

mdt pim jp-interval

[no] mdt pim jp-interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

pim

PIM protocol related parameters

jp-interval

Join-Prune interval used between peers

interval

Interval in seconds

Command Mode

- /exec/configure/vrf

mdt source

[no] mdt source <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

mdt

Backbone Multicast Distribution Tree

source

Source interface to be used in the backbone network

interface

Use IP address of this interface

Command Mode

- /exec/configure/vrf

media-type auto

media-type auto

Syntax Description

media-type

Select the media-type link

auto

Select mgmt port as auto

Command Mode

- /exec/configure/if-mgmt-ether

media-type rj45

media-type rj45

Syntax Description

media-type

Select the media-type link

rj45

Select mgmt port rj45

Command Mode

- /exec/configure/if-mgmt-ether

media-type sfp

media-type sfp

Syntax Description

media-type

Select the media-type link

sfp

Select mgmt port sfp

Command Mode

- /exec/configure/if-mgmt-ether

media

media <vlanshowinfo-media-type> | no media

Syntax Description

no

Negate a command or set its defaults

media

Media type of the VLAN

vlanshowinfo-media-type

Select media type

Command Mode

- /exec/configure/vlan

medium

medium <medium-type> | no medium <medium-type>

Syntax Description

no

Negate a command or set its defaults

medium

Configure Interface medium mode

medium-type

Command Mode

- /exec/configure/if-vlan-common

medium broadcast

{ medium broadcast | no medium broadcast }

Syntax Description

no

Negate a command or set its defaults

medium

Configure Interface medium mode

broadcast

Broadcast medium

Command Mode

- /exec/configure/ppm-ethernet-switch /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p

medium broadcast

{ medium broadcast | no medium broadcast }

Syntax Description

no

Negate a command or set its defaults

medium

Configure Interface medium mode

broadcast

Broadcast medium

Command Mode

- /exec/configure/if-ethernet-p2p-switch /exec/configure/if-ethernet-p2p /exec/configure/if-ethernet-all /exec/configure/if-eth-l3-non-member /exec/configure/if-port-channel /exec/configure/if-remote-ethernet-sub /exec/configure/if-eth-port-channel-p2p /exec/configure/if-ethernet-p2p-m

medium p2p

{ medium p2p | no medium p2p }

Syntax Description

no

Negate a command or set its defaults

medium

Configure Interface medium mode

p2p

Point-to-Point medium

Command Mode

- /exec/configure/ppm-ethernet-switch /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub

medium p2p

{ medium p2p | no medium p2p }

Syntax Description

no

Negate a command or set its defaults

medium

Configure Interface medium mode

p2p

Point-to-Point medium

Command Mode

- /exec/configure/if-ethernet-p2p-switch /exec/configure/if-ethernet-p2p /exec/configure/if-ethernet-all /exec/configure/if-eth-l3-non-member /exec/configure/if-port-channel /exec/configure/if-remote-ethernet-sub /exec/configure/if-eth-port-channel-p2p /exec/configure/if-ethernet-p2p-m

member vlan

{ member vlan <vlan-range> } | { no member vlan [ <vlan-range> ] }

Syntax Description

no

Negate a command or set its defaults

member

Set fabricpath topology VLAN membership

vlan

Configure VLANs for Fabricpath Topology

vlan-range

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure/fp-topology

member vni

[no] member vni <vni-range>

Syntax Description

no

(Optional) Negate a command or set its defaults

member

NVE VN-Segment Membership

vni

Virtual Network Identifier

vni-range

vni range, Example: 5000 or 5001-5008

Command Mode

- /exec/configure/if-nve

member vni

{ member vni <vni-range> } | { no member vni [ <vni-range> ] }

Syntax Description

no

Negate a command or set its defaults

member

Set fabricpath topology VNI membership

vni

Configure VNIs for L2MP Topology

vni-range

vni range, Example: 4096, 4099-5013, 5019

Command Mode

- /exec/configure/fp-topology

member vni associate-vrf

[no] member vni <vni-range> associate-vrf

Syntax Description

no

(Optional) Negate a command or set its defaults

member

NVE VN-Segment Membership

vni

Virtual Network Identifier

vni-range

vni range, Example: 5000 or 5001-5008

associate-vrf

Associate vni with a vrf

Command Mode

- /exec/configure/if-nve

member vni mcast-group

[no] member vni <vni-range> mcast-group <maddr1> [ <maddr2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

member

NVE VN-Segment Membership

vni

Virtual Network Identifier

vni-range

vni range, Example: 5000 or 5001-5008

mcast-group

NVE Multicast Group

maddr1

Multicast IP Prefix

maddr2

(Optional) Multicast IP Prefix

Command Mode

- /exec/configure/if-nve

merge config

merge config <from-file> [ show-only ]

Syntax Description

merge

merge

config

merge configuration (to running-config)

from-file

the file containing the destination configuration, a patch will be created and applied to the running-config's matching section (format accordning to 'show run section' command output)

show-only

(Optional) only show the patch, don't execute it

Command Mode

- /exec

message-digest-key md5

{ { message-digest-key <keyid> md5 <key> } | { no message-digest-key [ <keyid> md5 <key> ] } }

Syntax Description

no

Negate a command or set its defaults

message-digest-key

Message digest authentication password (key)

keyid

Key ID

md5

Use MD5 algorithm

key

The OSPF password (key)

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

message-digest-key md5

{ { message-digest-key <keyid> md5 <key> } | { no message-digest-key [ <keyid> md5 <key> ] } }

Syntax Description

no

Negate a command or set its defaults

message-digest-key

Message digest authentication password (key)

keyid

Key ID

md5

Use MD5 algorithm

key

OSPF password (key)

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

metric-style transition

[no] metric-style { transition }

Syntax Description

no

(Optional) Negate a command or set its defaults

metric-style

Configure metric style used in advertised LSPs

transition

Use both narrow and wide metric style

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

metric direct 0

[no] metric direct 0

Syntax Description

no

(Optional) Negate a command or set its defaults

metric

Cost of direct routes

direct

Cost of direct routes

0

direct route cost is zero to be compatible with IOS

Command Mode

- /exec/configure/router-rip

metric maximum-hops

{ { metric maximum-hops <hops> } | { no metric maximum-hops [ <hops> ] } }

Syntax Description

no

Negate a command or set its defaults

metric

Modify EIGRP routing metrics and parameters

maximum-hops

Advertise EIGRP routes greater than <hops> as unreachable

hops

Hop count

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

metric rib-scale

{ { metric rib-scale <ribscale> } | { no metric rib-scale [ <ribscale> ] } }

Syntax Description

no

Negate a command or set its defaults

metric

Modify EIGRP routing metrics and parameters

rib-scale

Defines RIB scaling value

ribscale

Rib scale

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

metric version 64bit

{ { metric version 64bit } | { no metric version [ 64bit ] } }

Syntax Description

no

Negate a command or set its defaults

metric

Modify EIGRP routing metrics and parameters

version

Modify EIGRP metric version

64bit

64 bit metric version

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

metric weights

{ { metric weights <tos> <k1> <k2> <k3> <k4> <k5> [ <k6> ] } | { no metric weights [ <tos> <k1> <k2> <k3> <k4> <k5> [ <k6> ] ] } }

Syntax Description

no

Negate a command or set its defaults

metric

Modify EIGRP routing metrics and parameters

weights

Modify EIGRP metric coefficients

tos

Type Of Service (Only TOS 0 supported)

k1

K1

k2

K2

k3

K3

k4

K4

k5

K5

k6

(Optional) K6

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

mgmt-policy

{ no mgmt-policy <policy-name> } | { mgmt-policy <policy-name> { permit | deny } [ [ ip { <ip-addr> [ <ip-mask> ] } ] | [ ip6 <ipv6-prefix> ] ] [ protocol { tcp | udp | icmp } ] [ src-port <srcport> [ <srcport-end> ] ] [ dest-port <dstport> [ <dstport-end> ] ] }

Syntax Description

no

Negate a command or set its defaults

mgmt-policy

PM Management Policy

policy-name

Name of the policy

permit

Permit access

deny

Deny access

ip

(Optional) IPV4 address

ip-addr

(Optional) IPV4 source address/subnet

ip-mask

(Optional) IPV4 mask

ip6

(Optional) IPV6 Address

protocol

(Optional) Protocol

tcp

(Optional) TCP protocol

udp

(Optional) UDP protocol

icmp

(Optional) ICMP protocol

src-port

(Optional) Source port

srcport

(Optional) Source port

srcport-end

(Optional) Source Port end

dest-port

(Optional) Destination port

dstport

(Optional) Destination port

dstport-end

(Optional) Destination Port end

Command Mode

- /exec/configure

mkdir

mkdir <uri0>

Syntax Description

mkdir

Create new directory

uri0

Directory name

Command Mode

- /exec

mod-serial

mod-serial <mod-serial> | no mod-serial

Syntax Description

no

Negate the command

mod-serial

Module serial number

mod-serial

Serial number

Command Mode

- /exec/configure/fex

mode

[no] mode <mode-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

mode

Hot-standby mode

mode-id

Node Mode

Command Mode

- /exec/configure/itd-dg-node

mode

[no] mode <mode-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

mode

Hot-standby mode

mode-id

Node Mode

Command Mode

- /exec/configure/itd-dg-node

mode

[no] mode <vmode>

Syntax Description

no

(Optional) Negate a command or set its defaults

mode

Operational mode of the VLAN

vmode

Command Mode

- /exec/configure/vlan

mode auto

mode auto | no mode auto

Syntax Description

no

Negate a command or set its defaults

mode

Multiple commands in back-end server

auto

Enable peer-gateway, auto-recovery, fabricpath multicast load balance (if available), IP ARP Sync and IPv6 nd Sync

Command Mode

- /exec/configure/vpc-domain

mode every

[no] mode <numsample> every <period>

Syntax Description

mode

Define the Sampler mode

numsample

Number of samples per sampling - 64 max

every

Time-based sampling

period

Sampling Time Period in millseconds - 64000 max

Command Mode

- /exec/configure/nfm-sampler

mode openflow

[no] mode openflow

Syntax Description

no

(Optional) Negate a command or set its defaults

mode

Configure the interface operational mode

openflow

Disable/Enable openflow on the interface

Command Mode

- /exec/configure/if-port-channel /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-ethernet-switch

mode out-of

[no] mode <numsample> out-of <samples> | no mode

Syntax Description

mode

Define the Sampler mode

numsample

Number of samples per sampling - 63 max

out-of

M out of N packets

samples

Number of packets in each sampling - 8191 max

Command Mode

- /exec/configure/nfm-sampler

mode tap-aggregation

[no] mode tap-aggregation

Syntax Description

no

(Optional) Negate a command or set its defaults

mode

Configure the interface operational mode

tap-aggregation

Disable/Enable tap aggregation on the interface

Command Mode

- /exec/configure/if-switching

monitor erspan granularity

[no] monitor erspan granularity { 100_ms | 100_ns | 1588 | ns }

Syntax Description

no

(Optional) Negate a command or set its defaults

monitor

Configure Ethernet SPAN sessions

erspan

Configure Ethernet ERSPAN sessions

granularity

Configure granularity for ERSPAN Type III sessions

100_ms

100 microseconds

100_ns

100 nanoseconds

1588

1588 in seconds/nanoseconds

ns

nanoseconds

Command Mode

- /exec/configure

monitor erspan origin ip-address

[no] monitor erspan origin ip-address <ip> [ global ]

Syntax Description

no

(Optional) Negate a command or set its defaults

monitor

Configure Ethernet SPAN sessions

erspan

Configure Ethernet ERSPAN sessions

origin

Configure the erspan origin ip address

ip-address

Configure global origin IP address

ip

global

(Optional) Configure in default VDC across all VDCs

Command Mode

- /exec/configure

monitor erspan switch-id

[no] monitor erspan switch-id <switch_id>

Syntax Description

no

(Optional) Negate a command or set its defaults

monitor

Configure Ethernet SPAN sessions

erspan

Configure Ethernet ERSPAN sessions

switch-id

Configure the erspan switch-id

switch_id

erspan-switch-id

Command Mode

- /exec/configure

monitor session

monitor session <session_number> [ type local ]

Syntax Description

monitor

Configure Ethernet SPAN sessions

session

Configure session preferences

session_number

type

(Optional) Specify a session type

local

(Optional) Create a local session

Command Mode

- /exec/configure

monitor session shut

[no] monitor session { all | <session_range> } [ shut ] | monitor session { all | <session_range> } shut

Syntax Description

no

Negate a command or set its defaults

monitor

Configure Ethernet SPAN sessions

session

Configure session preferences

all

All sessions

session_range

shut

(Optional) Shut the selected session

Command Mode

- /exec/configure

monitor session type acl-capture

monitor session <session_number> type acl-capture

Syntax Description

monitor

Configure Ethernet SPAN sessions

session

Configure session preferences

session_number

type

Specify a session type

acl-capture

Create an acl-capture session

Command Mode

- /exec/configure

monitor session type erspan-destination

monitor session <session_number> type erspan-destination

Syntax Description

monitor

Configure Ethernet SPAN sessions

session

Configure session preferences

session_number

type

Specify a session type

erspan-destination

Create an erspan destination session

Command Mode

- /exec/configure

monitor session type erspan-source

monitor session <session_number> type erspan-source

Syntax Description

monitor

Configure Ethernet SPAN sessions

session

Configure session preferences

session_number

type

Specify a session type

erspan-source

Create an erspan source session

Command Mode

- /exec/configure

move

move <uri0> <uri1>

Syntax Description

move

Move files

uri0

Source file path

uri1

Destination file path

Command Mode

- /exec

mping

mping [ { broadcast | lc module <i0> | sup module <i1> } ]

Syntax Description

mping

run mping

broadcast

(Optional) mping broadcast

lc

(Optional) mping line-cards

module

(Optional) slot information

i0

(Optional)

sup

(Optional) mping supervisor

module

(Optional) slot information

i1

(Optional)

Command Mode

- /exec

mpls ip

[no] mpls ip

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

ip

Enable IP over MPLS

Command Mode

- /exec/configure/if-igp /exec/configure/if-mpls-tunnel

mpls ip default-route

[no] mpls ip default-route

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

ip

Dynamic MPLS forwarding for IP

default-route

Allow MPLS forwarding for ip default route

Command Mode

- /exec/configure/ldp

mpls ip forwarding

[no] mpls ip forwarding

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

ip

Enable IP over MPLS

forwarding

Enable MPLS forwarding on the interface

Command Mode

- /exec/configure/if-ethernet /exec/configure/if-ethernet-all /exec/configure/if-ether-sub /exec/configure/if-eth-port-channel /exec/configure/if-port-channel-sub /exec/configure/if-port-channel-range /exec/configure/if-vlan-common /exec/configure/if-mvpn /exec/configure/if-p2p exec/configure/ppm-ethernet-switch

mpls ip propagate-ttl

mpls ip propagate-ttl | no mpls ip propagate-ttl [ forwarded | local ]

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

ip

Configure IP features

propagate-ttl

Configure IP ttl propagation over mpls

forwarded

(Optional) Prevent traceroute from showing the hops for forwarded packets

local

(Optional) Prevent traceroute from showing the hops only for local packets

Command Mode

- /exec/configure

mpls ip static

[no] mpls ip static

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

ip

Enable IP over MPLS

static

Enable IP over MPLS statically

Command Mode

- /exec/configure/if-gre-tunnel

mpls ip static

[no] mpls ip static

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

ip

Enable IP over MPLS

static

Enable IP over MPLS statically

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel

mpls ip ttl-expiration pop

[no] mpls ip ttl-expiration pop [ <labels> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

ip

Configure IP features

ttl-expiration

Configure ttl-expiration

pop

Pop

labels

(Optional) Number of labels

Command Mode

- /exec/configure

mpls label-space

[no] mpls label-space

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

label-space

create label space

Command Mode

- /exec/configure

mpls label range

[no] mpls label range <min-label> <max-label> [ static <min-static-label> <max-static-label> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

label

Label properties

range

Label range

min-label

Minimum label value

max-label

Maximum label value

static

(Optional) Specify block of labels for static bindings

min-static-label

(Optional) Minimum static label value

max-static-label

(Optional) Maximum static label value

Command Mode

- /exec/configure

mpls static binding ipv4

mpls static binding ipv4 { [ vrf { <vrf-name> | <vrf-known-name> } ] { <prefix> <mask> | <prefix-mask> } [ input ] <static-inlabel> | { <prefix> <mask> | <prefix-mask> } output <next-hop> { <static-outlabel> | explicit-null | implicit-null } } | no mpls static binding ipv4 { [ [ vrf { <vrf-name> | <vrf-known-name> } ] [ { <prefix> <mask> | <prefix-mask> } { [ input [ <static-inlabel> ] ] | [ <static-inlabel> ] } ] ] | [ { <prefix> <mask> | <prefix-mask> } [ output [ <next-hop> [ { <static-outlabel> | explicit-null | implicit-null } ] ] ] ] }

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

static

MPLS static application

binding

Establish static label bindings

ipv4

Bind IPv4 destination with label

vrf

(Optional) VPN Routing/Forwarding instance name

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

prefix

Destination prefix

mask

Destination prefix mask

prefix-mask

Destination prefix/mask

input

(Optional) Incoming (local) label

static-inlabel

Label Value

output

Outgoing (remote) label

next-hop

Destination next hop

static-outlabel

Label Value

explicit-null

IETF MPLS IPv4 explicit null label (0)

implicit-null

IETF MPLS implicit null label (3)

Command Mode

- /exec/configure/ldp

mpls static binding ipv4 vrf per-vrf input output pop-and-lookup

mpls static binding ipv4 vrf { <vrf-name> | <vrf-known-name> } per-vrf input <static-inlabel> output pop-and-lookup | no mpls static binding ipv4 vrf { <vrf-name> | <vrf-known-name> } per-vrf input <static-inlabel> output pop-and-lookup

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

static

MPLS static application

binding

Establish static label bindings

ipv4

Bind IPv4 destination with label

vrf

VPN Routing/Forwarding instance name

vrf-name

VRF name

vrf-known-name

Known VRF name

per-vrf

Per-VRF information

input

Incoming (local) label

static-inlabel

Label Value

output

Outgoing information

pop-and-lookup

Pop label and perform a lookup

Command Mode

- /exec/configure/ldp

mpls static configuration

[no] mpls static configuration

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

static

Configure Static Label Bindings

configuration

Enter MPLS Static global configuration submode

Command Mode

- /exec/configure

mpls strip

mpls strip { { poll-timer <timeout> } | { dest-mac <mac-addr> } | { threshold <low> <high> } | { label-age <age> [ sec | min | hrs | days ] } } | no mpls strip { poll-timer | dest-mac | threshold | label-age }

Syntax Description

no

Negate a command or set its defaults

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

poll-timer

Timer to poll for stats

timeout

Time in seconds to poll for stats

threshold

For when to delete aged labeld

low

Lower Threshold

high

Higher Threshold

label-age

label Age

age

Label age

sec

(Optional) Time in Seconds - default

min

(Optional) Time in Minutes

hrs

(Optional) Time in Hours

days

(Optional) Time in Days

dest-mac

Destination MAC address for egress frames

mac-addr

MAC Address

Command Mode

- /exec/configure

mpls strip

[no] mpls strip

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

Command Mode

- /exec/configure

mpls strip label

[no] mpls strip label { <value> } [ interface <interface-name> ] | no mpls strip label all

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

label

Add a static label in database

value

20 bit value for label

all

Delete all static labels

interface

(Optional) Interface

interface-name

(Optional) Interface name

Command Mode

- /exec/configure

mpls traffic-eng

[no] mpls traffic-eng <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

Configure MPLS parameters

traffic-eng

Routing protocol commands for MPLS Traffic Engineering (TE)

level

IS-IS level

Command Mode

- /exec/configure/router-isis

mpls traffic-eng administrative-weight

mpls traffic-eng administrative-weight <num> | no mpls traffic-eng administrative-weight

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

traffic-eng

Configure Traffic Engineering parameters

administrative-weight

Set the administrative weight for the interface

num

Weight

Command Mode

- /exec/configure/if-igp /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

mpls traffic-eng area

[no] mpls traffic-eng area <area-id-ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

OSPF MPLS configuration commands

traffic-eng

OSPF MPLS Traffic Engineering commands

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

Command Mode

- /exec/configure/router-ospf

mpls traffic-eng attribute-flags

mpls traffic-eng attribute-flags <value> | no mpls traffic-eng attribute-flags

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

traffic-eng

Configure Traffic Engineering parameters

attribute-flags

Set user-defined interface attribute flags

value

Attribute flags

Command Mode

- /exec/configure/if-igp /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

mpls traffic-eng backup-path

[no] mpls traffic-eng backup-path [ <tunnel-num> ] | mpls traffic-eng backup-path <tunnel-num>

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

traffic-eng

Configure Traffic Engineering parameters

backup-path

Configure an MPLS TE backup for this interface

tunnel-num

(Optional)

Command Mode

- /exec/configure/if-igp /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

mpls traffic-eng bandwidth

[no] mpls traffic-eng bandwidth | mpls traffic-eng bandwidth [ percent <percentage> | <bw-kbps> ]

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

traffic-eng

Configure Traffic Engineering parameters

bandwidth

RSVP Reservable Bandwidth (kbps)

percent

(Optional) Specify a percentage of interface bandwidth

percentage

(Optional) Percentage of bandwidth

bw-kbps

(Optional) Reservable Bandwidth (kbps)

Command Mode

- /exec/configure/if-igp /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

mpls traffic-eng configuration

mpls traffic-eng configuration

Syntax Description

mpls

MPLS configuration commands

traffic-eng

Traffic engineering commands

configuration

Enter Traffic Engineering global configuration submode

Command Mode

- /exec/configure

mpls traffic-eng fast-reroute promote

[no] mpls traffic-eng fast-reroute promote

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-reroute

fast-reroute command

promote

promote to a better backup tunnel

mpls

MPLS configuration commands

traffic-eng

Traffic engineering commands

Command Mode

- /exec

mpls traffic-eng flooding thresholds up

mpls traffic-eng flooding thresholds { up <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> [ <up_p> ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] | down <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> [ <dn_p> ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] } | no mpls traffic-eng flooding thresholds { up | down }

Syntax Description

no

Negate a command or set its defaults

mpls

MPLS configuration commands

traffic-eng

Configure Traffic Engineering parameters

flooding

Set flooding parameters

thresholds

Set flooding thresholds

up

Set the thresholds for increased resource availability

up_p

increased bandwidth usage (percent)

down

Set the thresholds for decreased resource availability

dn_p

decreased bandwidth usage (percent)

Command Mode

- /exec/configure/if-igp /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

mpls traffic-eng multicast-intact

[no] mpls traffic-eng multicast-intact

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

OSPF MPLS configuration commands

traffic-eng

OSPF MPLS Traffic Engineering commands

multicast-intact

MPLS TE multicast support

Command Mode

- /exec/configure/router-ospf

mpls traffic-eng multicast-intact

[no] mpls traffic-eng multicast-intact

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

Configure MPLS parameters

traffic-eng

Routing protocol commands for MPLS Traffic Engineering (TE)

multicast-intact

Configure MPLS-TE multicast interaction

Command Mode

- /exec/configure/router-isis

mpls traffic-eng reoptimize

[no] mpls traffic-eng reoptimize [ <tunnel-num> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

reoptimize

reoptimize traffeng tunnels

tunnel-num

(Optional)

mpls

MPLS configuration commands

traffic-eng

Traffic engineering commands

Command Mode

- /exec

mpls traffic-eng router-id

[no] mpls traffic-eng router-id <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

OSPF MPLS configuration commands

traffic-eng

OSPF MPLS Traffic Engineering commands

router-id

Router ID associated with TE

interface

Routable Interface

Command Mode

- /exec/configure/router-ospf

mpls traffic-eng router-id

[no] mpls traffic-eng router-id <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

Configure MPLS parameters

traffic-eng

Routing protocol commands for MPLS Traffic Engineering (TE)

router-id

Routing protocol commands for MPLS Traffic Engineering (TE)

interface

IS-IS interface

Command Mode

- /exec/configure/router-isis

mpls traffic-eng tunnels

[no] mpls traffic-eng tunnels

Syntax Description

no

(Optional) Negate a command or set its defaults

mpls

MPLS configuration commands

traffic-eng

Configure Traffic Engineering parameters

tunnels

enable MPLS Traffic Engineering tunnels

Command Mode

- /exec/configure/if-igp /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

mrib mdt

[no] mrib mdt <context-id> <encap-index> <mdt-group> <mdt-source> <src-if> <mdt-if>

Syntax Description

no

(Optional) Negate a command or set its defaults

mrib

MRIB config command

mdt

MDT config command

context-id

Context ID

encap-index

Encap Index

mdt-group

MDT Group

mdt-source

MDT source

src-if

Source Interface Name

mdt-if

MDT Interface Name

Command Mode

- /exec/configure

mrib mfdm-ack-delay

[no] mrib mfdm-ack-delay <ms>

Syntax Description

no

(Optional) Negate a command or set its defaults

mrib

Artificially slow MFDM down

mfdm-ack-delay

Set ack delay in MRIB's MFDM thread

ms

Delay MFDM acks, in milliseconds

Command Mode

- /exec

mst designated priority

mst <mst-id> designated priority <prio> | no mst <mst-id> designated priority [ <prio> ]

Syntax Description

no

Negate a command or set its defaults

mst

Multiple spanning tree configuration

mst-id

MST instance range, example: 0-3,5,7-9

designated

Set the designated bridge priority for the spanning tree

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096

Command Mode

- /exec/configure/spanning-tree/pseudo

mst root priority

mst <mst-id> root priority <prio> | no mst <mst-id> root priority [ <prio> ]

Syntax Description

no

Negate a command or set its defaults

mst

Multiple spanning tree configuration

mst-id

MST instance range, example: 0-3,5,7-9

root

Set the root bridge priority for the spanning tree

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096

Command Mode

- /exec/configure/spanning-tree/pseudo

mtrace

mtrace <source> [ <receiver> ] [ <group> ] [ vrf <vrf-known-name> ]

Syntax Description

mtrace

Trace

source

IP

receiver

(Optional) IP

group

(Optional) IP

vrf

(Optional) VRF

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

mtu

[no] mtu <value>

Syntax Description

no

(Optional) Negate a command or set its defaults

mtu

MTU for the CoS

value

MTU value

Command Mode

- /exec/configure/policy-map/type/uf/class

mtu1

[no] mtu1 <value>

Syntax Description

no

(Optional) Negate a command or set its defaults

mtu1

MTU for the CoS

value

MTU value

Command Mode

- /exec/configure/policy-map/type/uf/class

mtu

mtu <mtu_val> | no mtu [ <mtu_val> ]

Syntax Description

no

Negate a command or set its defaults

mtu

Configure mtu for the port

mtu_val

Command Mode

- /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub /exec/configure/if-sub /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

mtu

mtu <mtu-val> | no mtu [ <mtu-val> ]

Syntax Description

no

Negate a command or set its defaults

mtu

Configure MTU

mtu-val

Bytes

Command Mode

- /exec/configure/if-any-tunnel

mtu

mtu <mtu_value> | no mtu

Syntax Description

no

Negate a command or set its defaults

mtu

Set the MTU size for SPAN packets

mtu_value

Enter the value of MTU truncation size for SPAN packets

Command Mode

- /exec/configure/monitor-local-src

mtu

mtu <mtu_value> | no mtu

Syntax Description

no

Negate a command or set its defaults

mtu

Set the MTU size for ERSPAN packets

mtu_value

Enter the value of MTU truncation size for ERSPAN packets (erspan header + truncated original packet)

Command Mode

- /exec/configure/monitor-erspan-src

mtu

mtu <mtu_val> | no mtu

Syntax Description

no

Negate a command or set its defaults

mtu

Set the interface Maximum Transmission Unit (MTU)

mtu_val

MTU size in bytes

Command Mode

- /exec/configure/if-vlan-common

multi-destination trees

multi-destination trees <num-trees> | no multi-destination trees [ <num-trees> ]

Syntax Description

no

Negate a command or set its defaults

multi-destination

Multi destination config for a topology

trees

Trees config for a topology

num-trees

Number of multicast destination trees for a topology. Only topology ID 0 to 7 are configurable

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

multi-topology

[no] multi-topology [ transition ]

Syntax Description

no

(Optional) Negate a command or set its defaults

multi-topology

Enable multitopoloy for IPV6

transition

(Optional) Configure multitopology transition mode

Command Mode

- /exec/configure/router-isis/router-isis-af-ipv6

multicast

[no] multicast <mode_enum>

Syntax Description

no

(Optional) Negate a command or set its defaults

multicast

Enable multicast best-effort

mode_enum

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

mvr-config

[no] mvr-config

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-config

Enable IGMP MVR

Command Mode

- /exec/configure

mvr-group

[no] mvr-group { { <ip-addr> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR interface config

ip-addr

Group IP Address

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

mvr-group

[no] mvr-group { { <ip-addr> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR Group

ip-addr

Group IP Address

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/igmp-mvr-global

mvr-group

[no] mvr-group { { <ip-addr> count <count> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR Group

ip-addr

Group IP Address

count

Number of contiguous groups

count

Number of contiguos groups

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/igmp-mvr-global

mvr-group

[no] mvr-group { { <ip-addr> <ip-mask> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR Group

ip-addr

Group IP Address

ip-mask

IP network mask in format m.m.m.m

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/igmp-mvr-global

mvr-group

[no] mvr-group { { <ip-prefix> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR Group

ip-prefix

IP prefix and network mask length in format x.x.x.x/m

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/igmp-mvr-global

mvr-group

[no] mvr-group { { <ip-addr> count <count> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR interface config

ip-addr

Group IP Address

count

Number of contiguous groups

count

Number of contiguos groups

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

mvr-group

[no] mvr-group { { <ip-addr> <ip-mask> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR interface config

ip-addr

Group IP Address

ip-mask

IP network mask in format m.m.m.m

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

mvr-group

[no] mvr-group { { <ip-prefix> } [ { vlan <vlan-id> } ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-group

MVR interface config

ip-prefix

IP prefix and network mask length in format x.x.x.x/m

vlan

(Optional) Global default MVR vlan

vlan-id

(Optional) Enter MVR Vlan

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

mvr-type receiver

[no] mvr-type receiver

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-type

MVR interface config

receiver

Mvr receiver port

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

mvr-type source

[no] mvr-type source

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-type

MVR interface config

source

Mvr source port

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

mvr-vlan

{ { no mvr-vlan <vlan-id> } | { mvr-vlan <vlan-id> } }

Syntax Description

no

Negate a command or set its defaults

mvr-vlan

Interface MVR Config

vlan-id

Enter MVR Vlan

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

mvr-vlan

[no] mvr-vlan <vlan-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

mvr-vlan

Global default MVR vlan

vlan-id

Enter MVR Vlan

Command Mode

- /exec/configure/igmp-mvr-global

Chapter 15. N Commands

- name-lookup

- name-lookup

- name

- name

- name

- name

- nat destination

- nat destination

- nbm flow acceptance-mode guaranteed nbm flow acceptance-mode

- nbm flow bandwidth nbm flow bandwidth

- nbm mode controller

- nbm mode flow

- nbm multicast route add

- nbm multicast route delete

- nbm test-rest-api secure request-type

- nbm unit-test all

- negotiate auto

- neighbor-down fib-accelerate

- neighbor

- neighbor

- neighbor

- neighbor

- neighbor

- neighbor maximum-prefix

- net

- net

- net

- network

- network

- network

- network

- network area

- next-address exclude-address

- next-hop-self

- next-hop-self

- next-hop-third-party

- next-hop-third-party

- next-hop out-label explicit-null implicit-null next-hop auto-resolve out-label explicit-null implicit-null

- next-hop out-label explicit-null implicit-null next-hop auto-resolve out-label explicit-null implicit-null

- nexthop route-map

- nexthop trigger-delay critical non-critical

- ngoam install acl

- ngoam profile

- no-more

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- no

- node

- node

- node

- nsf await-redist-proto-convergence

- ntp access-group

- ntp access-group match-all

- ntp allow private

- ntp authenticate

- ntp authentication-key md5

- ntp drop-aged-packet

- ntp enable ntpd-logfile debug-level

- ntp logging

- ntp master

- ntp passive

- ntp peer

- ntp rts-update

- ntp server

- ntp source-interface

- ntp source

- ntp sync-retry

- ntp trusted-key

- nv overlay evpn

- nve interface remap-replication-servers

- nve interface replication-server up

- nxapi certificate

- nxapi flow

- nxapi http port

- nxapi use-vrf management default

- nxsdk enable app

- nxsdk service-name

name-lookup

[no] name-lookup

Syntax Description

no

(Optional) Negate a command or set its defaults

name-lookup

Display OSPF router ids as DNS names

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

name-lookup

[no] name-lookup

Syntax Description

no

(Optional) Negate a command or set its defaults

name-lookup

Enable Name Lookup for OSPF Neighbors

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

name

name <redundancy-name> | no name [ <redundancy-name> ]

Syntax Description

no

Negate a command or set its defaults

name

Redundancy name

redundancy-name

Name String

Command Mode

- /exec/configure/if-eth-any/glbp

name

name <vlan-name> | no name

Syntax Description

no

Negate a command or set its defaults

name

Ascii name of the VLAN

vlan-name

The ascii name for the VLAN

Command Mode

- /exec/configure/vlan

name

name <name-val> | no name [ <name-val> ]

Syntax Description

no

Negate a command or set its defaults

name

Set configuration name

name-val

Configuration name

Command Mode

- /exec/configure/spanning-tree/mst/configuration

name

name [ <name> ] | no name

Syntax Description

no

Negate a command or set its defaults

name

Redundancy name string

name

(Optional) name string

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

nat destination

{ nat destination } | { no nat destination }

Syntax Description

no

Negate a command or set its defaults

nat

Network Address Translation

destination

Destination NAT

Command Mode

- /exec/configure/itd

nat destination

{ nat destination } | { no nat destination }

Syntax Description

no

Negate a command or set its defaults

nat

Network Address Translation

destination

Destination NAT

Command Mode

- /exec/configure/itd

nbm flow acceptance-mode guaranteed nbm flow acceptance-mode

{ nbm flow acceptance-mode { guaranteed | best-fit } } | [ no ] nbm flow acceptance-mode

Syntax Description

nbm

Non Blocking Multicast

flow

Flow Characteristics

acceptance-mode

Flow Acceptance Mode

guaranteed

New flows are guaranteed to be accepted

best-fit

New flows are best-fit among fabric links

Command Mode

- /exec/configure

nbm flow bandwidth nbm flow bandwidth

{ nbm flow bandwidth <i0> } | [ no ] nbm flow bandwidth

Syntax Description

nbm

Non Blocking Multicast

flow

Flow Characteristics

bandwidth

Bandwidth per flow

i0

Per Flow Bandwidth in Mbps

Command Mode

- /exec/configure

nbm mode controller

[no] nbm mode controller [ __readonly__ <output> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

nbm

non blocking multicast

mode

set pmn mode

controller

enable controller-mode for pmn

__readonly__

(Optional)

output

(Optional)

Command Mode

- /exec/configure

nbm mode flow

[no] nbm mode flow

Syntax Description

no

(Optional) Negate a command or set its defaults

nbm

Non Blocking multicast

mode

Set NBM flow mode

flow

Flow Characteristics

Command Mode

- /exec/configure

nbm multicast route add

[no] nbm multicast route add

Syntax Description

nbm

NBM Commands

multicast

MULTICAST

route

Route

add

add

Command Mode

- /exec/configure

nbm multicast route delete

[no] nbm multicast route delete

Syntax Description

nbm

NBM Commands

multicast

MULTICAST

route

Route

delete

delete

Command Mode

- /exec/configure

nbm test-rest-api secure request-type

nbm test-rest-api { secure | plain } request-type { POST | GET | PUT | DELETE }

Syntax Description

nbm

nbm

test-rest-api

Test REST API

secure

Over HTTPS

plain

Over plain HTTP

request-type

type of http request

POST

HTTP POST

GET

HTTP GET

PUT

HTTP PUT

DELETE

HTTP DELETE

Command Mode

- /exec

nbm unit-test all

nbm unit-test all

Syntax Description

nbm

nbm

unit-test

unit test

all

perform all unit tests

Command Mode

- /exec/configure

negotiate auto

negotiate auto | no negotiate auto

Syntax Description

no

Negate a command or set its defaults

negotiate

Configure link negotiation parameters

auto

Configure auto-negotiation

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

neighbor-down fib-accelerate

[no] neighbor-down fib-accelerate

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor-down

Handle BGP neighbor down event, due to various reasons

fib-accelerate

Accelerate the hardware updates for IP/IPv6 adjacencies for neighbor

Command Mode

- /exec/configure/router-bgp/vrf-cmds

neighbor

[no] neighbor { <neighbor-prefix> | <ipv6-neighbor-prefix> } [ remote-as [ <asn> | route-map <rmap-name> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-prefix

IP prefix for neighbors

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number

route-map

(Optional) Route-map to match prefix peer AS number

rmap-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf

neighbor

neighbor [ vrf { <vrf-name> | <vrf-known-name> } ] <ipaddr> { implicit-withdraw | labels accept <pfx-list> | targeted } | no neighbor [ vrf { <vrf-name> | <vrf-known-name> } ] <ipaddr> [ implicit-withdraw | labels accept | targeted ]

Syntax Description

no

Negate a command or set its defaults

neighbor

Configure neighbor parameters

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

ipaddr

IP address for LDP neighbor

implicit-withdraw

Enable LDP Implicit Withdraw Label

labels

Configure label binding exchange controls

accept

Specify label bindings to accept

pfx-list

Name of prefix list

targeted

Establish targeted session

Command Mode

- /exec/configure/ldp

neighbor

[no] neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ remote-as <asn> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-id

IP address of the neighbor

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number

Command Mode

- /exec/configure/router-bgp

neighbor

[no] neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ remote-as <asn> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-id

IP address of the neighbor

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number

Command Mode

- /exec/configure/router-bgp/router-bgp-vrf

neighbor

[no] neighbor { <neighbor-prefix> | <ipv6-neighbor-prefix> } [ remote-as [ <asn> | route-map <rmap-name> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-prefix

IP prefix for neighbors

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number

route-map

(Optional) Route-map to match prefix peer AS number

rmap-name

(Optional) Route-map name

Command Mode

- /exec/configure/router-bgp

neighbor maximum-prefix

{ { neighbor <address> { <interface> | maximum-prefix <value> [ warning-only ] } } | { no neighbor <address> [ <interface> | maximum-prefix <value> [ warning-only ] ] } } | { { neighbor maximum-prefix <value> [ <threshold> ] [ warning-only ] [ restart <time1> ] [ restart-count <count> ] [ reset-time <time2> ] [ dampened ] } | { no neighbor maximum-prefix [ <value> [ <threshold> ] [ warning-only ] [ restart <time1> ] [ restart-count <count> ] ] } }

Syntax Description

no

Negate a command or set its defaults

neighbor

Specify a neighbor router

interface

Interface

address

Neighbor address

maximum-prefix

Maximum number of IP prefixes acceptable from a neighbor

value

Number of IP prefixes for maximum-prefix limit

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Only give warning message when limit is exceeded

restart

(Optional) Duration for which a prefix source is ignored

time1

(Optional) Restart interval in minutes

restart-count

(Optional) Number of times sessions are auto-restarted

count

(Optional) Number of times

reset-time

(Optional) Duration after which restart history is cleared

time2

(Optional) Reset time in minutes

dampened

(Optional) Exponentially increase restart time interval

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

net

[no] net <net>

Syntax Description

no

(Optional) Negate a command or set its defaults

net

Configure Network Entity Title for IS-IS

net

NET in form of XX.XXXX. ... .XXXX[.00]

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

net

[no] net <net>

Syntax Description

no

(Optional) Negate a command or set its defaults

net

Configure Network Entity Title for IS-IS

net

NET in form of XX.XXXX. ... .XXXX[.00]

Command Mode

- /exec/configure/otv-isis

net

[no] net <net>

Syntax Description

no

(Optional) Negate a command or set its defaults

net

Configure Network Entity Title for IS-IS

net

NET in form of XX.XXXX. ... .XXXX[.00]

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

network

[no] network { <ip-addr> mask <ip-mask> | <ip-prefix> } [ route-map <rmap-name> | summarize | evpn ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Configure an IP prefix to advertise

ip-addr

IP network to advertise

mask

Configure the mask of the IP prefix to advertise

ip-mask

Dotted 4-octet mask

ip-prefix

IP prefix in CIDR format

route-map

(Optional) Apply route-map to modify attributes

rmap-name

(Optional) Route-map name

summarize

(Optional) Summarize more specific prefixes from routing table

evpn

(Optional) Only advertise route towards evpn side

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

network

[no] network { <ip-dest> <ip-mask> | <ip-prefix> }

Syntax Description

no

(Optional) Negate a command or set its defaults

network

RIP IP network

ip-dest

IP addr format

ip-mask

IP network mask format

ip-prefix

Exact prefix

Command Mode

- /exec/configure/router-rip/router-rip-af-ipv4 /exec/configure/router-rip/router-rip-vrf-af-ipv4

network

[no] network { { <address> <mask> } | <prefix> }

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Enable routing on an IP network

address

Network number

mask

EIGRP wild card bits

prefix

IP prefix in slash format

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-ipv4

network

[no] network <ipv6-prefix> [ route-map <rmap-name> | summarize ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Configure an IPv6 prefix to advertise

route-map

(Optional) Apply route-map to modify attributes

rmap-name

(Optional) Route-map name

summarize

(Optional) Summarize more specific prefixes from routing table

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

network area

[no] network { <ip-dest> <ip-mask> | <ip-prefix> } area { <area-id-ip> | <area-id-int> }

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Enable routing on an IP network

ip-dest

IP prefix format: i.i.i.i

ip-mask

IP network mask format: m.m.m.m

ip-prefix

IP prefix format: x.x.x.x/ml

area

Configure area properties

area-id-ip

OSPF area ID in IP address format

area-id-int

OSPF area ID as a decimal format

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

next-address exclude-address

{ next-address [ loose | strict ] <ipaddr> | exclude-address <ipaddr> }

Syntax Description

next-address

Specify the next address in the path

loose

(Optional) Target address is loose

strict

(Optional) Target address is strict

exclude-address

Exclude an address from subsequent partial path segments

ipaddr

Enter IP address (A.B.C.D)

Command Mode

- /exec/configure/te/expl-path

next-hop-self

[ no | default ] next-hop-self

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

next-hop-self

Set our peering address as nexthop

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6

next-hop-self

[ no | default ] next-hop-self

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

next-hop-self

Set our peering address as nexthop

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

next-hop-third-party

[ no | default ] next-hop-third-party

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

next-hop-third-party

Compute a third-party nexthop if possible

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

next-hop-third-party

[ no | default ] next-hop-third-party

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

next-hop-third-party

Compute a third-party nexthop if possible

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

next-hop out-label explicit-null implicit-null next-hop auto-resolve out-label explicit-null implicit-null

[no] { next-hop [ backup <interface> ] <ipv6-next-hop> out-label { <static-outlabel> | explicit-null | implicit-null } | next-hop auto-resolve out-label { <static-outlabel> | explicit-null | implicit-null } }

Syntax Description

no

(Optional) Negate a command or set its defaults

next-hop

Nexthop

static-outlabel

Label Value

interface

(Optional) Back up interface

out-label

Output label

explicit-null

IETF MPLS IPv6 explicit null label (2)

implicit-null

IETF MPLS implicit null label (3)

auto-resolve

auto resolve the destination path

backup

(Optional) Backup destination

Command Mode

- /exec/configure/mpls_static/ipv6/input

next-hop out-label explicit-null implicit-null next-hop auto-resolve out-label explicit-null implicit-null

[no] { next-hop [ backup <interface> ] <next-hop> out-label { <static-outlabel> | explicit-null | implicit-null } | next-hop auto-resolve out-label { <static-outlabel> | explicit-null | implicit-null } }

Syntax Description

no

(Optional) Negate a command or set its defaults

next-hop

Nexthop

next-hop

Destination IPv4 next hop

static-outlabel

Label Value

interface

(Optional) Back up interface

out-label

Output label

explicit-null

IETF MPLS IPv4 explicit null label (0)

implicit-null

IETF MPLS implicit null label (3)

auto-resolve

auto resolve the destination path

backup

(Optional) Backup destination

Command Mode

- /exec/configure/mpls_static/ipv4/input

nexthop route-map

[no] nexthop route-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

nexthop

Nexthop tracking

route-map

Route map for valid nexthops

rmap-name

Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-af-link-state /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls

nexthop trigger-delay critical non-critical

{ nexthop trigger-delay critical <criticaldelay> non-critical <noncriticaldelay> } | { no nexthop trigger-delay }

Syntax Description

no

Negate a command or set its defaults

nexthop

Nexthop tracking

trigger-delay

Set the delay to trigger nexthop tracking

critical

Nexthop changes affecting reachability

non-critical

Other nexthop changes

noncriticaldelay

Delay value (miliseconds)

criticaldelay

Delay value (miliseconds)

Command Mode

- /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-link-state /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

ngoam install acl

[no] ngoam install acl

Syntax Description

no

(Optional) Negate a command or set its defaults

ngoam

ngoam

install

Ngoam install

acl

Ngoam install acl

Command Mode

- /exec/configure

ngoam profile

[no] ngoam profile <profile-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

ngoam

Configure ngoam oam

profile

Configure ngoam oam profile

profile-id

ngoam profile id

Command Mode

- /exec/configure

no-more

| no-more

Syntax Description

|

Pipe command output to filter

no-more

Turn-off pagination for command output

Command Mode

- /output

no

{ [ <seqno> ] | no } <permitdeny> <proto_udp> { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } [ { { <src_port_op> { <src_port0> | <src_port0_str> } } | { <src_port_range> { <src_port1> | <src_port1_str> } { <src_port2> | <src_port2_str> } } | src_portgroup <src_port_group> } ] { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } [ { { <dst_port_op> { <dst_port0> | <dst_port0_str> } } | { <dst_port_range> { <dst_port1> | <dst_port1_str> } { <dst_port2> | <dst_port2_str> } } | dst_portgroup <dst_port_group> } ] { [ { dscp { <dscp_num> | <dscp_str> } } ] [ { flow-label <flow_num> } ] [ log ] [ time-range <time_range_name> ] [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] } + } [ nve vni <vni-id> ] | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ { dscp { <dscp_num> | <dscp_str> } } ] [ { flow-label <flow_num> } ] [ fragments ] [ log ] [ time-range <time_range_name> ] [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + } } [ nve vni <vni-id> ] [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ capture session <session-id> ] { [ <actionv6> <actionidv6> ] }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

proto_udp

Protocol

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

src_any

Any

src_key_host

A single source host

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

src_port_op

(Optional) Port operator

src_port_range

(Optional) Port range

src_port0

(Optional) Port number

src_port0_str

(Optional) UDP port

src_port1

(Optional) Port number

src_port1_str

(Optional) UDP port

src_port2

(Optional) Port number

src_port2_str

(Optional) UDP port

src_portgroup

(Optional) src port group

src_port_group

(Optional) Port group name

dst_any

Any

dst_key_host

A single destination host

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dst_port_op

(Optional) Port operator

dst_port_range

(Optional) Port range

dst_port0

(Optional) Port number

dst_port0_str

(Optional) UDP port

dst_port1

(Optional) Port number

dst_port1_str

(Optional) UDP port

dst_port2

(Optional) Port number

dst_port2_str

(Optional) UDP port

dst_portgroup

(Optional) dst port group

dst_port_group

(Optional) Port group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

flow-label

(Optional) Flow label

flow_num

(Optional) Flow label value

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

nve

(Optional) VNI ID <0-16777215>

vni

(Optional) VNI ID <0-16777215>

vni-id

(Optional) VNI ID <0-16777215>

actionv6

(Optional) ActionV6

actionidv6

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipv6acl

no

[no] { userprofile | trustedCert | CRLLookup | user-switch-bind | user-certdn-match | user-pubkey-match }

Syntax Description

no

Negate a command or set its defaults

userprofile

Delete the userprofile

trustedCert

Delete the trustedCert

CRLLookup

Delete the CRLLookup

user-switch-bind

Delete the user-switch-bind

user-certdn-match

Delete the certificate matching

user-pubkey-match

Delete the pubkey matching

Command Mode

- /exec/configure/ldap/search

no

[no] <seqno>

Syntax Description

no

Negate a command or set its defaults

seqno

Sequence number

Command Mode

- /exec/configure/arpacl /exec/configure/ipgroup /exec/configure/ipv6group /exec/configure/portgroup /exec/configure/timerange

no

[no] <seqno>

Syntax Description

no

Negate a command or set its defaults

seqno

Sequence number

Command Mode

- /exec/configure/macacl

no

[no] <seqno>

Syntax Description

no

Negate a command or set its defaults

seqno

Sequence number

Command Mode

- /exec/configure/ipacl /exec/configure/ipv6acl

no

{ [ <seqno> ] | no } <permitdeny> { { { { ethertype <ethertypeid> } | { { ip | <proto> | <ip_other_proto> } { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { ttl <ttl_num> } | { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + | { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } | { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + } [ capture session <session-id> ] } } [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] } | { udf { <udf_name> <udf_val> <udf_mask> } + } } { [ <action> <actionid> ] } + [ log ]

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

ethertype

Configure match based on ethertype

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

ethertypeid

Configure the ethertype value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

ip

Any IP protocol

proto

A protocol number

ip_other_proto

ip_other_proto

src_any

Any

src_addr

Source network address

src_wild

Source wildcard bits

src_prefix

Source network prefix

src_key_host

A single source host

src_host

Source address

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

dst_any

Any

dst_addr

Destination network address

dst_wild

Destination wildcard bits

dst_prefix

Destination network prefix

dst_key_host

A single destination host

dst_host

Destination address

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

tos

(Optional) Match packets with given TOS value

tos_num

(Optional) Type of service value

tos_str

(Optional) Type of service label

precedence

(Optional) Match packets with given precedence value

prec_num

(Optional) Precedence value

prec_str

(Optional) Precedence label

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

ttl

(Optional) Match Packets with a given TTL value

ttl_num

(Optional)

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipacl

no

{ [ <seqno> ] | no } <permitdeny> { { ethertype <ethertypeid> } | { <proto_tcp> { { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } [ { { <src_port_op> { <src_port0> | <src_port0_str> } } | { <src_port_range> { <src_port1> | <src_port1_str> } { <src_port2> | <src_port2_str> } } | src_portgroup <src_port_group> } ] { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } [ { { <dst_port_op> { <dst_port0> | <dst_port0_str> } } | { <dst_port_range> { <dst_port1> | <dst_port1_str> } { <dst_port2> | <dst_port2_str> } } | dst_portgroup <dst_port_group> } ] { { [ urg | ack | psh | rst | syn | fin | established | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { http-method { <opt_num> | <opt_str> } } | { tcp-option-length <tcp_opt_len> } | { tcp-flags-mask <tcp_flags_mask> } | { ttl <ttl_num> } ] } + | { [ urg | ack | psh | rst | syn | fin | established | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } ] } + } [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] } | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { ttl <ttl_num> } | { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + | { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } | { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + } } } } } } [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + { { [ urg | ack | psh | rst | syn | fin | established | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { http-method { <opt_num> | <opt_str> } } | { tcp-option-length <tcp_opt_len> } | { tcp-flags-mask <tcp_flags_mask> } | { ttl <ttl_num> } ] } + | { [ urg | ack | psh | rst | syn | fin | established | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } ] } + } [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] [ capture session <session-id> ] { [ <action> <actionid> ] } + [ log ]

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

ethertype

Configure match based on ethertype

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

ethertypeid

Configure the ethertype value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

proto_tcp

Protocol

src_any

Any

src_addr

Source network address

src_wild

Source wildcard bits

src_prefix

Source network prefix

src_key_host

A single source host

src_host

Source address

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

src_port_op

(Optional) Port operator

src_port_range

(Optional) Port range

src_port0

(Optional) Port number

src_port0_str

(Optional) TCP port

src_port1

(Optional) Port number

src_port1_str

(Optional) TCP port

src_port2

(Optional) Port number

src_port2_str

(Optional) TCP port

src_portgroup

(Optional) src port group

src_port_group

(Optional) Port group name

dst_any

Any

dst_addr

Destination network address

dst_wild

Destination wildcard bits

dst_prefix

Destination network prefix

dst_key_host

A single destination host

dst_host

Destination address

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dst_port_op

(Optional) Port operator

dst_port_range

(Optional) Port range

dst_port0

(Optional) Port number

dst_port0_str

(Optional) TCP port

dst_port1

(Optional) Port number

dst_port1_str

(Optional) TCP port

dst_port2

(Optional) Port number

dst_port2_str

(Optional) TCP port

dst_portgroup

(Optional) dst port group

dst_port_group

(Optional) Port group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

tos

(Optional) Match packets with given TOS value

tos_num

(Optional) Type of service value

tos_str

(Optional) Type of service label

precedence

(Optional) Match packets with given precedence value

prec_num

(Optional) Precedence value

prec_str

(Optional) Precedence label

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

ttl

(Optional) Match Packets with a given TTL value

ttl_num

(Optional)

tcp-option-length

(Optional) Specify TCP Options size

tcp_opt_len

(Optional) TCP option length (multiples of 4 bytes)

tcp-flags-mask

(Optional) Specify TCP Flags

tcp_flags_mask

(Optional) TCP flags mask

http-method

(Optional) Match packets based on http-method

opt_num

(Optional) http_option value

opt_str

(Optional) http_option_param

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

urg

(Optional) Match on the URG bit

ack

(Optional) Match on the ACK bit

psh

(Optional) Match on the PSH bit

rst

(Optional) Match on the RST bit

syn

(Optional) Match on the SYN bit

fin

(Optional) Match on the FIN bit

established

(Optional) Match established connections

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipacl

no

{ [ <seqno> ] | no } <permitdeny> { { ethertype <ethertypeid> } | { <proto_udp> { { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } [ { { <src_port_op> { <src_port0> | <src_port0_str> } } | { <src_port_range> { <src_port1> | <src_port1_str> } { <src_port2> | <src_port2_str> } } | src_portgroup <src_port_group> } ] { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } [ { { <dst_port_op> { <dst_port0> | <dst_port0_str> } } | { <dst_port_range> { <dst_port1> | <dst_port1_str> } { <dst_port2> | <dst_port2_str> } } | dst_portgroup <dst_port_group> } ] { { [ [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { ttl <ttl_num> } ] } + | { [ [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } ] } + } [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] [ nve vni <vni-id> ] } | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { ttl <ttl_num> } | { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + | { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } | { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + } } } [ nve vni <vni-id> ] } } } [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + { { [ [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { ttl <ttl_num> } ] } + | { [ [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } ] } + } [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] # 2163 ../feature/acl_mgr/cli/aclmgr.cmd [ capture session <session-id> ] { [ <action> <actionid> ] } + [ log ]

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

ethertype

Configure match based on ethertype

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

ethertypeid

Configure the ethertype value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

proto_udp

Protocol

src_any

Any

src_addr

Source network address

src_wild

Source wildcard bits

src_prefix

Source network prefix

src_key_host

A single source host

src_host

Source address

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

src_port_op

(Optional) Port operator

src_port_range

(Optional) Port range

src_port0

(Optional) Port number

src_port0_str

(Optional) UDP port

src_port1

(Optional) Port number

src_port1_str

(Optional) UDP port

src_port2

(Optional) Port number

src_port2_str

(Optional) UDP port

src_portgroup

(Optional) src port group

src_port_group

(Optional) Port group name

dst_any

Any

dst_addr

Destination network address

dst_wild

Destination wildcard bits

dst_prefix

Destination network prefix

dst_key_host

A single destination host

dst_host

Destination address

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dst_port_op

(Optional) Port operator

dst_port_range

(Optional) Port range

dst_port0

(Optional) Port number

dst_port0_str

(Optional) UDP port

dst_port1

(Optional) Port number

dst_port1_str

(Optional) UDP port

dst_port2

(Optional) Port number

dst_port2_str

(Optional) UDP port

dst_portgroup

(Optional) dst port group

dst_port_group

(Optional) Port group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

tos

(Optional) Match packets with given TOS value

tos_num

(Optional) Type of service value

tos_str

(Optional) Type of service label

precedence

(Optional) Match packets with given precedence value

prec_num

(Optional) Precedence value

prec_str

(Optional) Precedence label

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

ttl

(Optional) Match Packets with a given TTL value

ttl_num

(Optional)

nve

(Optional) VNI ID <0-16777215>

vni

(Optional) VNI ID <0-16777215>

vni-id

(Optional) VNI ID <0-16777215>

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipacl

no

{ [ <seqno> ] | no } <permitdeny> <proto_igmp> { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ [ log ] [ time-range <time_range_name> ] | <igmp_num> | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } ] + | [ [ log ] [ time-range <time_range_name> ] | <igmp_str> | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } ] + | [ [ log ] [ time-range <time_range_name> ] | <igmp_num> | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } ] + | [ [ log ] [ time-range <time_range_name> ] | <igmp_str> | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } ] + } } | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { ttl <ttl_num> } ] } + | { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } ] } + } } [ capture session <session-id> ] { [ <action> <actionid> ] } + [ log ] }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

proto_igmp

Protocol

src_any

Any

src_addr

Source network address

src_wild

Source wildcard bits

src_prefix

Source network prefix

src_key_host

A single source host

src_host

Source address

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

dst_any

Any

dst_addr

Destination network address

dst_wild

Destination wildcard bits

dst_prefix

Destination network prefix

dst_key_host

A single destination host

dst_host

Destination address

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

tos

(Optional) Match packets with given TOS value

tos_num

(Optional) Type of service value

tos_str

(Optional) Type of service label

precedence

(Optional) Match packets with given precedence value

prec_num

(Optional) Precedence value

prec_str

(Optional) Precedence label

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

ttl

(Optional) Match Packets with a given TTL value

ttl_num

(Optional)

igmp_num

(Optional) IGMP message type

igmp_str

(Optional) IGMP type

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipacl

no

{ [ <seqno> ] | no } <permitdeny> { { { ethertype <ethertypeid> } | { <proto_icmp> { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ [ log ] [ time-range <time_range_name> ] | { <icmp_type> [ <icmp_code> ] } | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } ] + | [ [ log ] [ time-range <time_range_name> ] | <icmp_str> | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } ] + | [ [ log ] [ time-range <time_range_name> ] | { <icmp_type> [ <icmp_code> ] } | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } ] + | [ [ log ] [ time-range <time_range_name> ] | <icmp_str> | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } ] + } } | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { dscp { <dscp_num> | <dscp_str> } } | { ttl <ttl_num> } ] } + | { [ [ fragments ] | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } | { tos { <tos_num> | <tos_str> } } | { precedence { <prec_num> | <prec_str> } } | { ttl <ttl_num> } ] } + } } } } } [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ capture session <session-id> ] { [ <action> <actionid> ] } + [ log ] }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

ethertype

Configure match based on ethertype

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

ethertypeid

Configure the ethertype value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

proto_icmp

Protocol

src_any

Any

src_addr

Source network address

src_wild

Source wildcard bits

src_prefix

Source network prefix

src_key_host

A single source host

src_host

Source address

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

dst_any

Any

dst_addr

Destination network address

dst_wild

Destination wildcard bits

dst_prefix

Destination network prefix

dst_key_host

A single destination host

dst_host

Destination address

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

tos

(Optional) Match packets with given TOS value

tos_num

(Optional) Type of service value

tos_str

(Optional) Type of service label

precedence

(Optional) Match packets with given precedence value

prec_num

(Optional) Precedence value

prec_str

(Optional) Precedence label

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

ttl

(Optional) Match Packets with a given TTL value

ttl_num

(Optional)

icmp_type

(Optional) ICMP message type

icmp_code

(Optional) ICMP message code

icmp_str

(Optional) ICMP label

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipacl

no

{ [ <seqno> ] | no } <permitdeny> <proto_tcp> { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } [ { { <src_port_op> { <src_port0> | <src_port0_str> } } | { <src_port_range> { <src_port1> | <src_port1_str> } { <src_port2> | <src_port2_str> } } | src_portgroup <src_port_group> } ] { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } [ { { <dst_port_op> { <dst_port0> | <dst_port0_str> } } | { <dst_port_range> { <dst_port1> | <dst_port1_str> } { <dst_port2> | <dst_port2_str> } } | dst_portgroup <dst_port_group> } ] { [ { dscp { <dscp_num> | <dscp_str> } } ] | [ { flow-label <flow_num> } ] | [ log ] [ time-range <time_range_name> ] | [ urg | ack | psh | rst | syn | fin | established ] | { tcp-flags-mask <tcp_flags_mask> } | [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] } + } | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ { dscp { <dscp_num> | <dscp_str> } } ] [ { flow-label <flow_num> } ] [ fragments ] [ log ] [ time-range <time_range_name> ] [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + } } [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ capture session <session-id> ] { [ <actionv6> <actionidv6> ] }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

proto_tcp

Protocol

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

src_any

Any

src_key_host

A single source host

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

src_port_op

(Optional) Port operator

src_port_range

(Optional) Port range

src_port0

(Optional) Port number

src_port0_str

(Optional) TCP port

src_port1

(Optional) Port number

src_port1_str

(Optional) TCP port

src_port2

(Optional) Port number

src_port2_str

(Optional) TCP port

src_portgroup

(Optional) src port group

src_port_group

(Optional) Port group name

dst_any

Any

dst_key_host

A single destination host

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dst_port_op

(Optional) Port operator

dst_port_range

(Optional) Port range

dst_port0

(Optional) Port number

dst_port0_str

(Optional) TCP port

dst_port1

(Optional) Port number

dst_port1_str

(Optional) TCP port

dst_port2

(Optional) Port number

dst_port2_str

(Optional) TCP port

dst_portgroup

(Optional) dst port group

dst_port_group

(Optional) Port group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

flow-label

(Optional) Flow label

flow_num

(Optional) Flow label value

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

tcp-flags-mask

Specify TCP Flags

tcp_flags_mask

TCP flags mask

urg

(Optional) Match on the URG bit

ack

(Optional) Match on the ACK bit

psh

(Optional) Match on the PSH bit

rst

(Optional) Match on the RST bit

syn

(Optional) Match on the SYN bit

fin

(Optional) Match on the FIN bit

established

(Optional) Match established connections

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

actionv6

(Optional) ActionV6

actionidv6

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipv6acl

no

{ [ <seqno> ] | no } <permitdeny> <proto_sctp> { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } [ { { <src_port_op> { <src_port0> | <src_port0_str> } } | { <src_port_range> { <src_port1> | <src_port1_str> } { <src_port2> | <src_port2_str> } } | src_portgroup <src_port_group> } ] { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } [ { { <dst_port_op> { <dst_port0> | <dst_port0_str> } } | { <dst_port_range> { <dst_port1> | <dst_port1_str> } { <dst_port2> | <dst_port2_str> } } | dst_portgroup <dst_port_group> } ] { [ { dscp { <dscp_num> | <dscp_str> } } ] [ { flow-label <flow_num> } ] [ log ] [ time-range <time_range_name> ] [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] } + } | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ { dscp { <dscp_num> | <dscp_str> } } ] [ { flow-label <flow_num> } ] [ fragments ] [ log ] [ time-range <time_range_name> ] [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + } [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ capture session <session-id> ] }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

proto_sctp

Protocol

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

src_any

Any

src_key_host

A single source host

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

src_port_op

(Optional) Port operator

src_port_range

(Optional) Port range

src_port0

(Optional) Port number

src_port0_str

(Optional) SCTP port

src_port1

(Optional) Port number

src_port1_str

(Optional) SCTP port

src_port2

(Optional) Port number

src_port2_str

(Optional) SCTP port

src_portgroup

(Optional) src port group

src_port_group

(Optional) Port group name

dst_any

Any

dst_key_host

A single destination host

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dst_port_op

(Optional) Port operator

dst_port_range

(Optional) Port range

dst_port0

(Optional) Port number

dst_port0_str

(Optional) SCTP port

dst_port1

(Optional) Port number

dst_port1_str

(Optional) SCTP port

dst_port2

(Optional) Port number

dst_port2_str

(Optional) SCTP port

dst_portgroup

(Optional) dst port group

dst_port_group

(Optional) Port group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

flow-label

(Optional) Flow label

flow_num

(Optional) Flow label value

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

Command Mode

- /exec/configure/ipv6acl

no

{ [ <seqno> ] | no } <permitdeny> <proto_icmpv6> { { { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ { <icmpv6_type> [ <icmpv6_code> ] } | { dscp { <dscp_num> | <dscp_str> } } | { flow-label <flow_num> } | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] + | [ <icmpv6_str> | { dscp { <dscp_num> | <dscp_str> } } | { flow-label <flow_num> } | [ log ] [ time-range <time_range_name> ] | packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] + } } | { { <src_any> | { <src_addr> <src_wild> } | <src_prefix> | { src_key_host <src_host> } | { src_key_addrgrp <src_addrgrp_name> } } { <dst_any> | { <dst_addr> <dst_wild> } | <dst_prefix> | { dst_key_host <dst_host> } | { dst_key_addrgrp <dst_addrgrp_name> } } { [ { dscp { <dscp_num> | <dscp_str> } } ] [ { flow-label <flow_num> } ] [ fragments ] [ log ] [ time-range <time_range_name> ] [ packet-length { <plen_op> <plen0> | <plen_range> <plen1> <plen2> } ] [ { udf { <udf_name> <udf_val> <udf_mask> } + } ] } + } } [ vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ capture session <session-id> ] { [ <actionv6> <actionidv6> ] } }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

proto_icmpv6

Protocol

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

udf

(Optional) User defined field match

udf_name

(Optional) UDF name

udf_val

(Optional) UDF value to match

udf_mask

(Optional) Mask to apply to UDF value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

src_any

Any

src_key_host

A single source host

src_key_addrgrp

Source address group

src_addrgrp_name

Address group name

dst_any

Any

dst_key_host

A single destination host

dst_key_addrgrp

Destination address group

dst_addrgrp_name

Address group name

dscp

(Optional) Match packets with given dscp value

dscp_num

(Optional) Differentiated services codepoint value

dscp_str

(Optional) Differentiated services codepoint label

flow-label

(Optional) Flow label

flow_num

(Optional) Flow label value

fragments

(Optional) Check non-initial fragments

log

(Optional) Log matches against this entry

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

packet-length

(Optional) Match packets based on layer 3 packet length

plen_op

(Optional) Packet-length operator

plen_range

(Optional) Packet-length range

plen0

(Optional) Packet length

plen1

(Optional) Lower packet length

plen2

(Optional) Higher packet length

icmpv6_type

(Optional) ICMPv6 message type

icmpv6_code

(Optional) ICMPv6 message code

icmpv6_str

(Optional) ICMPv6 label

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

actionv6

(Optional) ActionV6

actionidv6

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec/configure/ipv6acl

no

{ { [ <seqno> ] | no } <permitdeny> { { [ <arp_request> ] req_ip { <sender1_ip_any> | { { <sender1_host> <sender1_ip> | { <sender1_net_ip> <sender1_ip_mask> } } } } mac { <sender1_mac_any> | { { <sender1_mac_host> <sender1_mac> | { <sender1_net_mac> <sender1_mac_mask> } } } } } | { <arp_response> resp_ip { <sender2_ip_any> | { { <sender2_host> <sender2_ip> | { <sender2_net_ip> <sender2_ip_mask> } } } } { <target_ip_any> | { { <target_host> <target_ip> | { <target_net_ip> <target_ip_mask> } } } } mac { <sender2_mac_any> | { { <sender2_mac_host> <sender2_mac> | { <sender2_net_mac> <sender2_mac_mask> } } } } [ { <target_mac_any> | { { <target_mac_host> <target_mac> | { <target_net_mac> <target_mac_mask> } } } } ] } } [ <arp_log> ] [ capture session <session-id> ] }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

req_ip

Any IP protocol

resp_ip

Any IP protocol

arp_request

(Optional) ARP_Request

arp_response

ARP_Response

sender1_ip_any

Any

sender1_host

Host

sender1_ip

IP address <a.b.c.d>

sender1_net_ip

IP address <a.b.c.d>

sender1_ip_mask

IP mask <a.b.c.d>

sender2_ip_any

Any

sender2_host

Host

sender2_ip

IP address <a.b.c.d>

sender2_net_ip

IP address <a.b.c.d>

sender2_ip_mask

IP mask <a.b.c.d>

target_ip_any

Any

target_host

Host

target_ip

IP address <a.b.c.d>

target_net_ip

IP address <a.b.c.d>

target_ip_mask

IP mask <a.b.c.d>

mac

MAC configuration commands

sender1_mac_any

Any

sender1_mac_host

Host

sender1_mac

MAC address EEEE.EEEE.EEEE

sender1_net_mac

MAC address EEEE.EEEE.EEEE

sender1_mac_mask

MAC mask EEEE.EEEE.EEEE

sender2_mac_any

Any

sender2_mac_host

Host

sender2_mac

MAC address EEEE.EEEE.EEEE

sender2_net_mac

MAC address EEEE.EEEE.EEEE

sender2_mac_mask

MAC mask EEEE.EEEE.EEEE

target_mac_any

(Optional) Any

target_mac_host

(Optional) Host

target_mac

(Optional) MAC address EEEE.EEEE.EEEE

target_net_mac

(Optional) MAC address EEEE.EEEE.EEEE

target_mac_mask

(Optional) MAC mask EEEE.EEEE.EEEE

arp_log

(Optional) Log

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

Command Mode

- /exec/configure/arpacl

no

{ [ <seqno> ] | no } { <addr> <wild> | <prefix> | host <hostaddr> }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

addr

A.B.C.D Network address of object-group member

wild

A.B.C.D wildcard

prefix

A.B.C.D/nn Network prefix of the object-group member

host

Host address of the object-group member

hostaddr

A.B.C.D Host address

Command Mode

- /exec/configure/ipgroup

no

{ [ <seqno> ] | no } { <addr> <wild> | <prefix> | host <hostaddr> }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

host

Host address of the object-group member

Command Mode

- /exec/configure/ipv6group

no

{ [ <seqno> ] | no } { <_port_op> <port0_num> | <_port_range> <port1_num> <port2_num> }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

_port_op

Port operator

_port_range

Port range

port0_num

Port number

port1_num

Port number

port2_num

Port number

Command Mode

- /exec/configure/portgroup

no

{ [ <seqno> ] | no } <permitdeny> { <src_any> | { <src_addr> <src_wild> } } { <dst_any> | { <dst_addr> <dst_wild> } } [ <mac_proto> | <mac_proto_str> ] [ vlan <vlan> | cos <cos> ] + [ time-range <time_range_name> ] [ capture session <session-id> ] { [ <macaction> <macactionid> ] } +

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

permitdeny

Permit/deny

src_any

Any

src_addr

Source MAC address

src_wild

Source wildcard bits

dst_any

Any

dst_addr

Destination MAC address

dst_wild

Destination wildcard bits

mac_proto

(Optional) MAC protocol number

mac_proto_str

(Optional) MAC protocol name

vlan

(Optional) VLAN number

cos

(Optional) CoS value

vlan

(Optional) VLAN number

cos

(Optional) CoS value

time-range

(Optional) Specify a time range

time_range_name

(Optional) Time range name

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

macaction

(Optional) MAC ACL Action

macactionid

(Optional) redirect: Ethernet1/1,port-channel1

Command Mode

- /exec/configure/macacl

node

[no] node [ ip <ip-addr> | IPv6 <ip-addrv6> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

node

ITD node

ip

(Optional) ITD node IPv4 address

ip-addr

(Optional) ITD node IP4 prefix in format i.i.i.i

IPv6

(Optional) ITD node IPv6 address

Command Mode

- /exec/configure/itd-device-group

node

[no] node [ ip <ip-addr> | IPv6 <ip-addrv6> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

node

ITD node

ip

(Optional) ITD node IPv4 address

ip-addr

(Optional) ITD node IP4 prefix in format i.i.i.i

IPv6

(Optional) ITD node IPv6 address

Command Mode

- /exec/configure/itd-device-group

node

[no] node [ ip <ip-addr> | IPv6 <ip-addrv6> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

node

ITD node

ip

(Optional) ITD node IPv4 address

ip-addr

(Optional) ITD node IP4 prefix in format i.i.i.i

IPv6

(Optional) ITD node IPv6 address

Command Mode

- /exec/configure/itd-session-device-group

nsf await-redist-proto-convergence

{ [ no ] nsf await-redist-proto-convergence }

Syntax Description

no

(Optional) Negate a command or set its defaults

nsf

Non-stop forwarding

await-redist-proto-convergence

Specify whether EIGRP should wait for other protocols to converge before advertising routes

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

ntp access-group

[no] ntp access-group { peer | serve-only | serve | query-only } <acl-name>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

access-group

NTP access-group

peer

access-group peer

serve

access-group serve

serve-only

access-group serve-only

query-only

access-group query-only

acl-name

Name of access list

Command Mode

- /exec/configure

ntp access-group match-all

[no] ntp access-group match-all

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

access-group

NTP access-group

match-all

Scan ACLs present in all ntp access groups

Command Mode

- /exec/configure

ntp allow private

[no] ntp allow { private | control [ rate-limit <delay> ] }

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

allow

Enable/Disable the packets

private

Enable/Disable Private mode packets

control

Enable/Disable Control mode packets

rate-limit

(Optional) Rate-limit the control packets

delay

(Optional) Rate-limit delay (Default 3)

Command Mode

- /exec/configure

ntp authenticate

[no] ntp authenticate

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

authenticate

Enable/Disable authentication

Command Mode

- /exec/configure

ntp authentication-key md5

[no] ntp authentication-key <number> md5 <md5> [ 0 | 7 ]

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

authentication-key

NTP authentication key

number

authentication key number (range 1-65535)

md5

use md5 authentication scheme

md5

MD5 string

0

(Optional) clear text

7

(Optional) encrypted

Command Mode

- /exec/configure

ntp drop-aged-packet

[no] ntp drop-aged-packet

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

drop-aged-packet

Enable or disable Riviera Timestamp Check.

Command Mode

- /exec/configure

ntp enable ntpd-logfile debug-level

[no] ntp enable ntpd-logfile debug-level <level>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

enable

Enable logging

ntpd-logfile

NTP daemon logs

debug-level

debug level of logs

level

debug level of logs

Command Mode

- /exec/configure

ntp logging

[no] ntp logging

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

logging

Enable/Disable logging of NTPD Events

Command Mode

- /exec/configure

ntp master

[no] ntp master [ <stratum-no> ]

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

master

Act as NTP master clock

stratum-no

(Optional) Stratum number

Command Mode

- /exec/configure

ntp passive

[no] ntp passive

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

passive

NTP passive command

Command Mode

- /exec/configure

ntp peer

[no] ntp peer <host0> [ prefer | key <keyid> | use-vrf { <vrf-name> | <vrf-known-name> } | minpoll <minpoll> | maxpoll <maxpoll> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

peer

NTP Peer address

host0

Hostname/IP address of the NTP Peer

prefer

(Optional) Preferred Server

key

(Optional) Keyid to be used while communicating to this server

keyid

(Optional) Value of keyid 1-65535

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

minpoll

(Optional) Minimum interval to poll a peer

minpoll

(Optional) Poll interval in secs to a power of 2 [default 4]

maxpoll

(Optional) Maximum interval to poll a peer

maxpoll

(Optional) Poll interval in secs to a power of 2 [default 6]

Command Mode

- /exec/configure

ntp rts-update

[no] ntp rts-update

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

rts-update

Enable or disable RTS update to linecards.

Command Mode

- /exec/configure

ntp server

[no] ntp server <host0> [ prefer | key <keyid> | use-vrf { <vrf-name> | <vrf-known-name> } | minpoll <minpoll> | maxpoll <maxpoll> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

server

NTP server address

host0

Hostname/IP address of the NTP Server

prefer

(Optional) Preferred Server

key

(Optional) Keyid to be used while communicating to this server

keyid

(Optional) Value of keyid 1-65535

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

minpoll

(Optional) Minimum interval to poll a server

minpoll

(Optional) Poll interval in secs to a power of 2 [default 4]

maxpoll

(Optional) Maximum interval to poll a server

maxpoll

(Optional) Poll interval in secs to a power of 2 [default 6]

Command Mode

- /exec/configure

ntp source-interface

[no] ntp source-interface <interface>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

source-interface

Source interface sending NTP packets

interface

Source interface

Command Mode

- /exec/configure

ntp source

[no] ntp source <ip-addr>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP Configuration

source

Source of NTP packets

ip-addr

IPv4/IPv6 address

Command Mode

- /exec/configure

ntp sync-retry

ntp sync-retry

Syntax Description

ntp

NTP configuration

sync-retry

Retry synchronization with configured servers

Command Mode

- /exec

ntp trusted-key

[no] ntp trusted-key <number>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

trusted-key

NTP trusted-key

number

trusted-key number

Command Mode

- /exec/configure

nv overlay evpn

[no] nv overlay evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

nv

Command to enable/disable features

overlay

Command to enable/disable features

evpn

Enable/Disable Ethernet VPN (EVPN)

Command Mode

- /exec/configure

nve interface remap-replication-servers

nve interface <nve-if> remap-replication-servers

Syntax Description

nve

Configure NVE information

interface

Interface

nve-if

NVE interface

remap-replication-servers

Remap Replication servers to VNIs

Command Mode

- /exec

nve interface replication-server up

nve interface <nve-if> replication-server <rep-addr> { up | down }

Syntax Description

nve

Configure NVE information

interface

Interface

nve-if

NVE interface

replication-server

Configure a replication server

rep-addr

Replication Server IP Address

up

mark replication-server up

down

mark replication-server down

Command Mode

- /exec

nxapi certificate

{ nxapi certificate { { httpskey { keyfile <uri0> | <line> } } | { httpscrt { certfile <uri1> | <line1> } } | { enable } } }

Syntax Description

nxapi

Configure nxapi

certificate

Https certificate configuration

httpskey

Https private key

httpscrt

Https certificate

keyfile

Https key file

certfile

Https certificate file

enable

Enable the current certificate

uri0

File containing https private key for the user

line

nxapi https private key

uri1

File containing https certificate

line1

nxapi https certificate

Command Mode

- /exec/configure

nxapi flow

{ [ no ] nxapi flow }

Syntax Description

no

(Optional) Negate a command or set its defaults

nxapi

Configure nxapi

flow

allow frontend to access /sys/flow/

Command Mode

- /exec/configure

nxapi http port

{ nxapi { http | https } port <s0> } | { no nxapi { http | https } } | { no nxapi { http | https } port <s0> }

Syntax Description

no

Negate a command or set its defaults

nxapi

Configure nxapi

s0

Port number. Please do not use well-known protocol ports

http

Http configuration

https

Https configuration

port

Port number

Command Mode

- /exec/configure

nxapi use-vrf management default

{ nxapi use-vrf { management | default | <vrf_name> } } | { no nxapi use-vrf { management | default | <vrf_name> } }

Syntax Description

no

Negate a command or set its defaults

nxapi

Configure nxapi

use-vrf

vrf to be used for nxapi communication

management

management vrf

default

default vrf

vrf_name

name of the vrf

Command Mode

- /exec/configure

nxsdk enable app

[no] nxsdk enable app <app-index>

Syntax Description

no

(Optional) Negate a command or set its defaults

nxsdk

NXOS SDK

enable

Command to enable/disable nxsdk application

app

Enable/disable application

app-index

Application index

Command Mode

- /exec

nxsdk service-name

{ [ no ] nxsdk service-name <service-name> }

Syntax Description

nxsdk

NXOS SDK

service-name

Complete path and name of file to execute

service-name

Service name

Command Mode

- /exec/configure

Chapter 16. O Commands

- oam-channel

- obfl logging uuid msg

- object-group ip address

- object-group ip port

- object-group ipv6 address

- offset-list route in

- onep

- onep applications

- onep install

- onep stop

- onep uninstall

- open-fsm

- operation-packet-priority normal

- option exporter-stats timeout

- option interface-table timeout

- option sampler-table timeout

- orib event-history

- orib orib_api_init

- ospfv3 authentication

- ospfv3 bfd

- ospfv3 cost

- ospfv3 dead-interval

- ospfv3 event-history cli size

- ospfv3 event-history detail

- ospfv3 event-history detail size

- ospfv3 event-history size

- ospfv3 flood-bw-percentage

- ospfv3 hello-interval

- ospfv3 instance

- ospfv3 mtu-ignore

- ospfv3 network broadcast

- ospfv3 network point-to-point

- ospfv3 passive-interface

- ospfv3 priority

- ospfv3 retransmit-interval

- ospfv3 shutdown

- ospfv3 transmit-delay

- otv-isis

- overbudgetshut

- overbudgetsyslog

- overlay-encapsulation

- overlay-encapsulation

- overload rip

- owner

oam-channel

{ oam-channel <val> } | { no oam-channel }

Syntax Description

oam-channel

oam-channel used

val

2 - nvo3 tissa

Command Mode

- /exec/configure/configngoamprofile

obfl logging uuid msg

obfl logging uuid <uuid> <log-file> msg <log_str>

Syntax Description

obfl

Perform the OBFL operation

logging

Perform the logging

uuid

UUID of the process

uuid

UUID of the process

log-file

Log File of your process

msg

Message to be Logged in the file

log_str

Type the message to be logged

Command Mode

- /exec

object-group ip address

[no] object-group ip address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ip

IP Object groups

address

Address object group

name

object-group name

Command Mode

- /exec/configure

object-group ip port

[no] object-group ip port <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ip

IP Object groups

port

IP port object group (can be used in IPv4 and IPv6 access-lists)

name

object-group name

Command Mode

- /exec/configure

object-group ipv6 address

[no] object-group ipv6 address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ipv6

IPv6 Object groups

address

Address object group

name

object-group name

Command Mode

- /exec/configure

offset-list route in

[no] offset-list { { route-map <map> } | { prefix-list <list> } } { in | out } <offset> <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

offset-list

Add or subtract offset from EIGRP metrics

route-map

Use a route-map for offset-list selection

map

Route-map name

prefix-list

Use a prefix-list for offset-list selection

list

Reference to prefix-list name

in

Perform offset on incoming updates

out

Perform offset on outgoing updates

offset

Offset

interface

Interface name

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

onep

[no] onep

Syntax Description

no

(Optional) Negate a command or set its defaults

onep

Enable/Disable One Platform

Command Mode

- /exec/configure

onep applications

[no] onep applications <config-domain>

Syntax Description

no

(Optional) Negate a command or set its defaults

onep

One Platform

applications

One platform applications

config-domain

Virtual service name or tag used by remote onep applications to retrieve its configuration

Command Mode

- /exec/configure

onep install

onep install <xsd-location> <config-domain>

Syntax Description

onep

One Platform

install

install a CLI definition

xsd-location

the xsd file containing the onep application CLI definition

config-domain

virtual service name or tag used by remote onep applications to retrieve its configuration

Command Mode

- /exec

onep stop

onep stop { session { all | <onep-session-id> } }

Syntax Description

onep

One Platform

stop

Stop specific activity

session

One Platform session

all

All sessions

onep-session-id

Specific session name

Command Mode

- /exec

onep uninstall

onep uninstall <app-name> <app-version> <config-domain> [ force ]

Syntax Description

onep

One Platform

uninstall

uninstall a CLI definition

app-name

application name

app-version

application version

config-domain

virtual service name or tag used by remote onep applications to retrieve its configuration

force

(Optional) force uninstallation

Command Mode

- /exec

open-fsm

[no] open-fsm

Syntax Description

no

(Optional) Negate a command or set its defaults

open-fsm

Enable session open FSM for establishing BGP sessions

Command Mode

- /exec/configure/router-bgp

operation-packet-priority normal

{ { no | default } operation-packet-priority | operation-packet-priority { normal | high } }

Syntax Description

no

default

Set a command to its defaults

operation-packet-priority

Set operation packet properties

high

Priority high

normal

Priority normal

Command Mode

- /exec/configure/ip-sla/jitter

option exporter-stats timeout

{ [ no ] option exporter-stats timeout <time> | no option exporter-stats timeout }

Syntax Description

option

Version 9 Option Templates and Data

exporter-stats

Exporter Statistics Option

timeout

Option resend time

time

Time in seconds

Command Mode

- /exec/configure/nfm-exporter-v9

option interface-table timeout

{ [ no ] option interface-table timeout <time> | no option interface-table timeout }

Syntax Description

option

Version 9 Option Templates and Data

interface-table

Interface Table Option

timeout

Option resend time

time

Time in seconds

Command Mode

- /exec/configure/nfm-exporter-v9

option sampler-table timeout

{ [ no ] option sampler-table timeout <time> | no option sampler-table timeout }

Syntax Description

option

Version 9 Option Templates and Data

sampler-table

Export Sampler Information

timeout

Option resend time

time

Time in seconds

Command Mode

- /exec/configure/nfm-exporter-v9

orib event-history

[no] orib event-history { cli | ipc | uroute | mroute | mroute_only | uhw | mhw | ha | internal } { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

orib

Display ORIB information

event-history

ORIB event logs

cli

ORIB cli logs

ipc

ORIB ipc logs

uroute

ORIB unicast route logs

mroute

ORIB multicast route logs

mroute_only

ORIB multicast route logs without mhw

uhw

ORIB unicast platform logs

mhw

ORIB multicast platform logs

ha

ORIB ha logs

internal

ORIB internal logs

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

- /exec/configure

orib orib_api_init

{ orib orib_api_init <client-name> } | { orib orib_api_close } | { orib orib_add_route <client-name> <mac> [ <nh> | <nh6> ] <if-name> } | { orib orib_delete_route <client-name> <mac> [ <nh> | <nh6> ] <if-name> }

Syntax Description

orib

Use ORIB API routines from OTV process

orib_api_init

Call orib_api_init() from the OTV process

orib_api_close

Call orib_api_close() from the OTV process

orib_add_route

Call orib_add_route() from OTV process

orib_delete_route

Call orib_delete_route() from OTV process

client-name

Client name registered to ORIB process

mac

VLAN-ID/MAC Address tuple in vvvv-aaaa.bbbb.cccc format

nh

(Optional) Next-hop IPv4 address

if-name

Next-hop interface (iod)

Command Mode

- /exec

ospfv3 authentication

ospfv3 authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> } } | no ospfv3 authentication { disable | ipsec spi <spi_id> }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

authentication

Enable Authentication

disable

Disable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 bfd

[no] ospfv3 bfd [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

bfd

Enable BFD on this interface

disable

(Optional) Disable BFD on this interface

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ospfv3 cost

{ ospfv3 cost <cost> } | { no ospfv3 cost [ <cost> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

cost

Cost associated with interface

cost

Cost value

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 dead-interval

{ ospfv3 dead-interval <interval> } | { no ospfv3 dead-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

dead-interval

Dead interval

interval

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 event-history cli size

[ no ospfv3 event-history cli ] | [ ospfv3 event-history cli size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

(Optional) Debugging functions

event-history

(Optional) log debug events into event history buffer

cli

(Optional) Cli logs

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

- /exec/configure/router-ospf3

ospfv3 event-history detail

[no] ospfv3 event-history detail

Syntax Description

no

Negate a command or set its defaults

ospfv3

Debugging functions

event-history

log debug events into event history buffer

detail

Detailed event history buffer

Command Mode

- /exec/configure/router-ospf3

ospfv3 event-history detail size

[ no ospfv3 event-history detail ] | [ ospfv3 event-history detail size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

(Optional) Debugging functions

event-history

(Optional) log debug events into event history buffer

detail

(Optional) Detailed event history buffer

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

- /exec/configure/router-ospf3

ospfv3 event-history size

[ no ospfv3 event-history { adjacency | event | ha | flooding | lsa | spf | redistribution | hello | spf-trigger } ] | [ ospfv3 event-history { adjacency | event | ha | flooding | lsa | spf | redistribution | hello | spf-trigger } size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

(Optional) Debugging functions

event-history

(Optional) log debug events into event history buffer

adjacency

(Optional) Adjacency formation logs

event

(Optional) Internal event logs

ha

(Optional) HA and GR logs

flooding

(Optional) LSA flooding logs

lsa

(Optional) LSA generation and databse logs

spf

(Optional) SPF calculation logs

redistribution

(Optional) Redistribution logs

hello

(Optional) HELLO related logs

spf-trigger

(Optional) SPF TRIGGER related logs

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

- /exec/configure/router-ospf3

ospfv3 flood-bw-percentage

[no] ospfv3 flood-bw-percentage <percentage>

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

flood-bw-percentage

Percentage of bandwidth used for flooding

percentage

Negate a command or set its defaults

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 hello-interval

{ ospfv3 hello-interval <interval> } | { no ospfv3 hello-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

hello-interval

Hello interval

interval

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 instance

{ ospfv3 instance <instance-id> } | { no ospfv3 instance [ <instance-id> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

instance

Instance identifier

instance-id

Instance identifier value

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 mtu-ignore

[no] ospfv3 mtu-ignore

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

mtu-ignore

Disable OSPF MTU mismatch detection

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 network broadcast

{ ospfv3 network { broadcast | point-to-point } } | { no ospfv3 network [ { broadcast | point-to-point } ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

network

Network type

broadcast

Specify OSPF broadcast multi-access network

point-to-point

Specify OSPF point-to-point network

Command Mode

- /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ospfv3 network point-to-point

{ ospfv3 network point-to-point } | { no ospfv3 network [ point-to-point ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

network

Network type

point-to-point

Specify OSPF point-to-point network

Command Mode

- /exec/configure/if-loopback

ospfv3 passive-interface

[ default | no ] ospfv3 passive-interface

Syntax Description

default

(Optional) Undo a command

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

passive-interface

Suppress routing updates on the interface

Command Mode

- /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ospfv3 priority

{ ospfv3 priority <prio> } | { no ospfv3 priority [ <prio> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

priority

Router priority

prio

Router priority

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 retransmit-interval

{ ospfv3 retransmit-interval <interval> } | { no ospfv3 retransmit-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 shutdown

[no] ospfv3 shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

shutdown

Shutdown ospf on this interface

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ospfv3 transmit-delay

{ ospfv3 transmit-delay <delay> } | { no ospfv3 transmit-delay [ <delay> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode

- /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

otv-isis

otv-isis <tag>

Syntax Description

otv-isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

- /exec/configure

overbudgetshut

overbudgetshut [ module <module> ]

Syntax Description

overbudgetshut

Shut down the specified LCs due to power over budget

module

(Optional) Module Force Shut down

module

(Optional) please enter the module number

Command Mode

- /exec

overbudgetsyslog

overbudgetsyslog

Syntax Description

overbudgetsyslog

Print Syslog to indicate power over budget

Command Mode

- /exec

overlay-encapsulation

[no] overlay-encapsulation <encap-type> [ tunnel-control-frames ]

Syntax Description

no

(Optional) Negate a command or set its defaults

overlay-encapsulation

NVE Overlay Encapsulation

encap-type

Configure encapsulation type

tunnel-control-frames

(Optional) tunnel protocol

Command Mode

- /exec/configure/if-nve

overlay-encapsulation

[no] overlay-encapsulation <encap-type> [ tunnel-control-frames [ <layer2-prot> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

overlay-encapsulation

NVE Overlay Encapsulation

encap-type

Configure encapsulation type

tunnel-control-frames

(Optional) tunnel protocol

layer2-prot

(Optional) configure specific protocol

Command Mode

- /exec/configure/if-nve

overload rip

overload rip

Syntax Description

overload

rip

Forced RIP overload

Command Mode

- /exec

owner

{ { no | default } owner | owner <text> }

Syntax Description

no

default

Set a command to its defaults

owner

Owner of Entry

text

Owner String

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

Chapter 17. P Commands

- packet

- param-list param-list

- parity

- parity

- passive-interface default

- passive-interface default

- passive-interface default

- passive-interface default

- password

- password

- password

- password prompt username

- password secure-mode

- password strength-check

- path-option dynamic explicit identifier

- path-selection metric igp

- path-selection metric igp

- path-selection overload allow

- path

- path next-hop out-label-stack

- pathtrace nve

- pause

- pause

- pause buffer-size2 pause-threshold2 resume-threshold2

- pause priority

- payload test pattern-type pad

- peer-gateway

- peer-ip

- peer-keepalive destination

- peer-switch

- peer-type fabric

- peer-vtep

- peer ip

- peer ip

- peer local service

- peer vdc service

- peer vdc service

- perf

- periodic-inventory notification

- periodic-inventory notification interval

- periodic to

- periodic to

- permit

- permit interface

- permit vlan

- permit vrf

- permit vsan

- personality

- personality backup

- personality restore

- phone-contact

- ping

- ping6

- ping nve

- pinning max-links

- pinning mode

- pktmgr cache disable

- pktmgr discard

- platform access-list capture

- platform access-list fp_dnl

- platform access-list update

- platform fabricpath mac-learning module

- platform forwarding interface statistics mode mpls

- platform forwarding layer-2 f1 exclude supervisor

- platform ip verify

- platform ipv6 verify

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos

- platform qos buffer peak monitor counter0 class

- platform qos buffer peak monitor counter1 class

- platform qos classify ns-only

- platform qos eoq

- platform qos include ipg

- platform qos ing

- platform qos ing

- platform qos mac ipg

- platform qos nodrop-PG-thresholds PG-size Red-threshold Yellow-threshold Green-threshold

- platform qos nodrop-queue-thresholds Queue-yellow Queue-green

- platform qos ns

- platform qos q-noise percent

- platform rate-limiter

- platform rate-limiter

- platform rate-limiter access-list-log

- platform rate-limiter span-egress

- plugin-test load

- plugin-test unload

- police

- police

- police

- police

- police police pps

- police police pps

- policy-map

- policy-map type control-plane

- policy-map type network-qos

- policy-map type psp

- policy-map type queuing

- policy

- policy

- pop

- port-channel bfd destination

- port-channel bfd start

- port-channel bfd track-member-link

- port-channel hash-distribution

- port-channel limit

- port-channel load-balance

- port-channel load-balance1 ethernet

- port-channel load-balance2 resilient

- port-channel load-balance ethernet

- port-channel load-balance hash-modulo-f2

- port-channel load-balance hash enable

- port-channel load-defer

- port-channel min-links

- port-channel port hash-distribution

- port-channel port load-defer

- port-profile

- port-profile dump

- port-profile no-redirection

- port-security stop learning

- port

- port control

- port control

- port destination

- power efficient-ethernet auto

- power efficient-ethernet sleep threshold aggressive

- power redundancy-mode combined

- power redundancy-mode combined force

- power redundancy-mode insrc-redundant

- power redundancy-mode ps-redundant

- power reserve

- poweroff

- pps

- pps

- precision milliseconds

- preempt

- preempt

- preempt

- preempt delay minimum

- preempt delay minimum reload sync preempt delay reload minimum sync preempt delay sync minimum reload preempt delay reload sync minimum preempt delay sync reload minimum preempt delay minimum sync reload preempt delay reload sync preempt delay sync reload preempt delay minimum sync preempt delay sync minimum preempt delay minimum reload preempt delay reload minimum preempt delay minimum preempt delay reload preempt delay sync preempt

- prefix out

- priority-flow-control auto-restore multiplier

- priority-flow-control fixed-restore multiplier

- priority-flow-control mode

- priority-flow-control override-interface mode off

- priority-flow-control recover interface

- priority-flow-control watch-dog-interval on

- priority-flow-control watch-dog-interval on

- priority-flow-control watch-dog interval

- priority-flow-control watch-dog shutdown-multiplier

- priority

- priority2

- priority

- priority

- priority

- priority

- priority

- priority

- priority

- private-vlan

- private-vlan association

- private-vlan mapping

- private-vlan release resource

- private-vlan synchronize

- probe

- probe

- probe

- probe

- probe

- probe

- probe get

- probe get

- probe get

- probe get

- probe get

- probe get

- probe host

- probe host

- probe host

- probe host

- probe host

- probe host

- probe port

- probe port

- probe port

- probe port

- probe port

- probe port

- promiscuous-mode off

- propagate-sgt

- protection

- protocol

- protocol shutdown

- protocol shutdown

- ptp

- ptp announce interval

- ptp announce timeout

- ptp clock one-step

- ptp delay-request minimum interval

- ptp domain

- ptp multicast master-only

- ptp offload

- ptp priority1

- ptp priority2

- ptp source

- ptp sync interval

- ptp time-sync

- ptp transport ipv4 ucast master

- ptp transport ipv4 ucast slave

- ptp ucast-source

- ptp vlan

- publish-event sub-system type

- pulse

- pulse

- pulse remove local

- purge ip route

- purge ipv6 route

- purge module running-config

- push

- pwd

- python

- python execute virtual-service command

- python instance

packet

{ packet <hex-string> } | { no packet }

Syntax Description

no

Negate a command or set its defaults

packet

Provide flow details starting with ethernet header in hex-string format: 0A1B ..

hex-string

Specify flow and payload in hex string format: 0A1B..

Command Mode

- /exec/configure/configngoamprofileflow

param-list param-list

[no] param-list <plistname> [ cross-check ] | param-list <plistname>

Syntax Description

no

(Optional) Negate a command or set its defaults

param-list

Configure a parameter list

plistname

Enter the name of the parameter list

cross-check

(Optional) Explicitly search for referencing config profile

Command Mode

- /exec/configure

parity

[no] parity { even | none | odd }

Syntax Description

no

(Optional) Negate a command or set its defaults

parity

Set terminal parity

even

Even parity

none

No parity

odd

Odd parity

Command Mode

- /exec/configure/console

parity

[no] parity { even | none | odd }

Syntax Description

no

(Optional) Negate a command or set its defaults

parity

Set terminal parity

even

Even parity

none

No parity

odd

Odd parity

Command Mode

- /exec/configure/com1

passive-interface default

[no] passive-interface default

Syntax Description

no

(Optional) Negate a command or set its defaults

passive-interface

Suppress routing updates on the interface

default

interfaces passive by default

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

passive-interface default

[no] passive-interface default <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

passive-interface

Suppress IS-IS PDU

default

Undo a command

level

IS-IS level

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

passive-interface default

[no] passive-interface default

Syntax Description

no

(Optional) Negate a command or set its defaults

passive-interface

Suppress routing updates on the interface

default

interfaces passive by default

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

passive-interface default

[no] passive-interface default

Syntax Description

no

(Optional) Negate a command or set its defaults

passive-interface

Suppress routing updates on the interface

default

interfaces passive by default

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

password

password [ vrf { <vrf-name> | <vrf-known-name> } ] { required [ req-for <req-pfx-list> ] | { fallback | option <seq-num> opt-for <opt-pfx-list> } { key-chain <name> } } | no password [ vrf { <vrf-name> | <vrf-known-name> } ] { required | fallback | option <seq-num> }

Syntax Description

no

Negate a command or set its defaults

password

Configure LDP password

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

required

Password is required for the peer

req-for

(Optional) Prefix list specifying control on LDP peers

req-pfx-list

(Optional) Prefix list for LDP peers

fallback

Specifies a fallback password will follow

option

LDP password option

seq-num

Sequence number of the LDP password option

opt-for

Prefix list specifying control on LDP peers

opt-pfx-list

Prefix list for LDP peers

key-chain

Specifies a key-chain name will follow

name

Key-chain name

Command Mode

- /exec/configure/ldp

password

{ [ no ] password <passwd> }

Syntax Description

password

password

passwd

password

Command Mode

- /exec/configure/dot1x-cred

password

password <password-string> | { no | default } password [ <password-string> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

password

Configure a password for neighbor

password-string

Neighbor password

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-neighbor-stmp /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

password prompt username

[no] password prompt username

Syntax Description

no

(Optional) Negate a command or set its defaults

password

Password for the user

prompt

Enable prompt for password

username

Enable prompt for password on username command

Command Mode

- /exec/configure

password secure-mode

[no] password secure-mode

Syntax Description

no

(Optional) Negate a command or set its defaults

password

Password for the user

secure-mode

Enable secure mode for changing password

Command Mode

- /exec/configure

password strength-check

[no] password strength-check

Syntax Description

no

(Optional) Negate a command or set its defaults

password

Password for the user

strength-check

Strength check of password

Command Mode

- /exec/configure

path-option dynamic explicit identifier

[no] path-option [ protect ] <pref> | path-option <pref> dynamic [ attributes <attr-name> | { bandwidth <kbps> | lockdown } + ] | path-option [ protect ] <pref> explicit { identifier <id-num> | name <name> } [ { attributes <attr-name> [ verbatim ] | { bandwidth <kbps> | lockdown | verbatim } + } ]

Syntax Description

no

Negate a command or set its defaults

path-option

a primary or fallback path setup option

protect

(Optional) a path protection setup option

pref

preference for this path option

dynamic

setup based on dynamically calculated path

explicit

setup based on preconfigured path

identifier

Specify an IP explicit path by number

id-num

Number of ip explicit path

name

Specify an IP explicit path by name

name

Name of ip explicit path

attributes

(Optional) Specify an LSP attribute list

attr-name

(Optional) Name of LSP attribute list

verbatim

(Optional) send out path as is, with no checking

bandwidth

(Optional) override the bandwidth configured on the tunnel

kbps

(Optional) bandwidth requirement in kbps

lockdown

(Optional) not a candidate for reoptimization

kbps

(Optional) bandwidth requirement in kbps

lockdown

(Optional) not a candidate for reoptimization

Command Mode

- /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

path-selection metric igp

[no] path-selection metric | path-selection metric { igp | te }

Syntax Description

no

Negate a command or set its defaults

path-selection

Path Selection Configuration

metric

Metric type for path calculation

igp

Use IGP Metric

te

Use TE Metric

Command Mode

- /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

path-selection metric igp

path-selection metric { igp | te } | no path-selection metric

Syntax Description

no

Negate a command or set its defaults

path-selection

Path Selection Configuration

metric

Metric Type Configuration

igp

Use IGP metric

te

Use TE metric (*Default)

Command Mode

- /exec/configure/te

path-selection overload allow

[no] path-selection overload allow | path-selection overload allow { head [ middle ] [ tail ] | middle [ tail ] | tail }

Syntax Description

no

Negate a command or set its defaults

path-selection

Path Selection Configuration

overload

Overload Node Configuration

allow

Allow overloaded nodes in CSPFs

head

Allow overloaded head node in TE CSPF

middle

(Optional) Allow overloaded middle node in TE CSPF

tail

(Optional) Allow overloaded tail node in TE CSPF

Command Mode

- /exec/configure/te

path

path <dn> [ depth { <level> | unbounded } ] [ query-condition <query> ] [ filter-condition <filter> ] | no path <dn>

Syntax Description

no

Negate a command or set its defaults

path

Create a sensor path

depth

(Optional) Specify a retrieval depth

query-condition

(Optional) Specify a query condition

filter-condition

(Optional) Specify a filter condition

dn

Distinguished Name

unbounded

(Optional) Retrieve entire tree

level

(Optional) Retrieval depth

query

(Optional) query condition

filter

(Optional) Filter Condition

Command Mode

- /exec/configure/telemetry/sensor-group

path next-hop out-label-stack

{ no path <path-num> | path <path-num> next-hop <next-hop> out-label-stack { <static-outlabel> + | implicit-null } }

Syntax Description

no

Negate a command or set its defaults

path

Configure an outgoing path for the LSP

path-num

Path identifier

next-hop

Nexthop

next-hop

Destination IPv4 next hop

out-label-stack

Series of output labels

static-outlabel

Label Value

implicit-null

IETF MPLS implicit null label (3)

Command Mode

- /exec/configure/mpls_static/ipv4/lsp/inlabel/forw

pathtrace nve

pathtrace nve { { { { ip { <numeric10> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> <intfid> } [ profile <pid> ] [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] [ src-intf <src_if> ] } payload-end ] [ copy-to <copy-to-ip> [ ext-id <ext_id> ] ] [

Syntax Description

pathtrace

Test

nve

network virtualization edge

numeric10

Peer vtep ip address

unknown

Peer vtep ip is unknown, will be derived from payload

intfid

Name of the interface for ngoam pathtrace on which dot1q is configured

payload

(Optional) Enter customer payload

mac-addr

(Optional) Mac

dstmac

(Optional) Destination mac address

smac

(Optional) Source mac address

dot1q

(Optional) Encapsulation dot1q/bd

dot1q-id

(Optional) Encapsulation dot1q/bd on which the mac is learnt

ip

ip address

dstip

(Optional) Destination ipv4 address

srcip

(Optional) source ipv4 address

ipv6

(Optional) ipv6 address

port

(Optional) L4 port info

sport

(Optional) Source port

dport

(Optional) Destination port

proto

(Optional) Protocol

proto-id

(Optional) IANA Protocol id

src-intf

(Optional) Interface on which the host with src ip of the payload is connected

src_if

(Optional) Interface

payload-end

(Optional) End payload info input

profile

(Optional) NGOAM profile to use

pid

(Optional) NGOAM profile id

mac

Mac

dmac

Destination mac address

dot1qid

Encapsulation dot1q/bd on which the mac is learnt

dot1qid1

(Optional) Encapsulation dot1q/bd on which the mac is learnt

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

copy-to

(Optional) Send responses to this IP over mgmt vrf instead

copy-to-ip

(Optional) IpV4 addr to send responses to

ext-id

(Optional) Identifier passed from caller

ext_id

(Optional) 32-bit identifier

Command Mode

- /exec

pause

[no] pause { buffer-size <size-in-bytes> pause-threshold <xoff-bytes> resume-threshold <xon-bytes> }

Syntax Description

no

(Optional) Negate a command or set its defaults

pause

PAUSE characteristics (CBFC)

buffer-size

Ingress buffer size in bytes

pause-threshold

Buffer limit for pausing in bytes

resume-threshold

Buffer limit at which to resume in bytes

Command Mode

- /exec/configure/policy-map/type/queuing/class

pause

[no] pause { no-drop | { delayed-drop <timeout> } | { [ buffer-size <size-in-bytes> pause-threshold <xoff-bytes> resume-threshold <xon-bytes> ] pfc-cos <pfc-cos-list> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

pause

PAUSE charecteristics (CBFC)

no-drop

NO-DROP

delayed-drop

Enable delayed-drop for the CoS

timeout

Timer value for delayed drop

buffer-size

(Optional) Ingress buffer size in bytes

pause-threshold

(Optional) Buffer limit for pausing in bytes

resume-threshold

(Optional) Buffer limit at which to resume in bytes

pfc-cos

CoS values to assert PFC on

pfc-cos-list

List of class-of-service values

Command Mode

- /exec/configure/policy-map/type/uf/class

pause buffer-size2 pause-threshold2 resume-threshold2

[no] pause buffer-size2 <size-in-bytes> pause-threshold2 <xoff-bytes> resume-threshold2 <xon-bytes>

Syntax Description

no

(Optional) Negate a command or set its defaults

pause

PAUSE characteristics (CBFC)

buffer-size2

Ingress buffer size in bytes

pause-threshold2

Buffer limit for pausing in bytes

resume-threshold2

Buffer limit at which to resume in bytes

Command Mode

- /exec/configure/policy-map/type/queuing/class

pause priority

[no] pause { priority-group <priority-group-number> }

Syntax Description

no

(Optional) Negate a command or set its defaults

pause

PAUSE characteristics (CBFC)

priority-group

ingress priority-group to which the traffic is mapped and pause limits are applied

priority-group-number

Priority group value

Command Mode

- /exec/configure/policy-map/type/queuing/class

payload test pattern-type pad

{ payload { test pattern-type <test-id> | pad <pad-val> } } | { no payload { test pattern-type | pad } }

Syntax Description

no

Negate a command or set its defaults

payload

Configure ngoam payload

test

Configure ngoam payload test

pattern-type

Configure ngoam payload test pattern

test-id

Configure ngoam payload test pattern id

pad

Configure ngoam payload test pattern pad

pad-val

Configure ngoam payload test pad value

Command Mode

- /exec/configure/configngoamprofile

peer-gateway

peer-gateway [ [ exclude-vlan <vlan-list> ] | [ exclude-bridge-domain<bridge-domain-list> ] ] | no peer-gateway

Syntax Description

no

Negate a command or set its defaults

peer-gateway

Enable L3 forwarding for packets destined to peer's gateway mac-address

exclude-vlan

(Optional) Specify VLANs to be excluded from peer-gateway functionality

vlan-list

(Optional) Specify the list of vlans

Command Mode

- /exec/configure/vpc-domain

peer-ip

[no] peer-ip <addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

peer-ip

Static IP Address Configuration

addr

Remote Peer IP Address

Command Mode

- /exec/configure/if-nve/vni/ingr-rep

peer-keepalive destination

peer-keepalive destination <dst-ip> [ [ source <src-ip> | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | tos-byte <tos-byte-value> | hold-timeout <hold-time-out> ] + | [ source <src-ip> | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | tos { <tos-value> | min-delay | max-throughput | max-reliability | min-monetary-cost | normal } | hold-timeout <hold-time-out> ] + | [ source <src-ip> | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | precedence { <prec-vlaue> | network | internet | critical | flash-override | flash | immediate | priority | routine } | hold-timeout <hold-time-out> ] + ]

Syntax Description

peer-keepalive

Keepalive/Hello with peer switch

destination

specify destination ip address of peer switch

dst-ip

IPv4 address (A.B.C.D) of destination

source

(Optional) source interface for hello

src-ip

(Optional) IPv4 address (A.B.C.D) of source

udp-port

(Optional) enter UDP port number used for hello

udp-port-num

(Optional) udp port number for hellos

vrf

(Optional) vrf to be used for hello messages

vrf-name

(Optional) vrf to be used for hellos

vrf-known-name

(Optional) Known VRF name

interval

(Optional) enter interval in milliseconds

interval-ms

(Optional) Enter interval in milliseconds

timeout

(Optional) enter timeout in seconds

time-out

(Optional) enter timeout in seconds

precedence

(Optional) Precedence

prec-vlaue

(Optional) Precedence value

network

(Optional) network (7)

internet

(Optional) internet (6)

critical

(Optional) critical (5)

flash-override

(Optional) flash-override (4)

flash

(Optional) flash (3)

immediate

(Optional) immediate (2)

priority

(Optional) priority (1)

routine

(Optional) routine (0)

tos

(Optional) Type of Service(IPV4)/Traffic Class(IPV6)

tos-value

(Optional) Enter 4-bit TOS value

min-delay

(Optional) min-delay (8)

max-throughput

(Optional) max-throughput (4)

max-reliability

(Optional) max-reliability (2)

min-monetary-cost

(Optional) min-monetary-cost (1)

normal

(Optional) normal (0)

tos-byte

(Optional) Type of Service Byte (IPv4)/Traffic Class Octet(IPv6)

tos-byte-value

(Optional) Enter 8-bit TOS value

hold-timeout

(Optional) hold timeout to ignore stale peer alive messages

hold-time-out

(Optional) Enter hold-timeout in seconds

Command Mode

- /exec/configure/vpc-domain

peer-switch

[no] peer-switch

Syntax Description

no

(Optional) Negate a command or set its defaults

peer-switch

Enable peer switch on vPC pair switches

Command Mode

- /exec/configure/vpc-domain

peer-type fabric

peer-type { fabric-external | fabric-border-leaf } | { no | default } peer-type

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

peer-type

Neighbor facing

fabric-external

Fabric external

fabric-border-leaf

Fabric Border Leaf

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

peer-vtep

[no] peer-vtep <addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

peer-vtep

Configure tunnel End Point

addr

Remote VTEP IP Address

Command Mode

- /exec/configure/if-nve/vni

peer ip

[no] peer ip <ip-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

peer

ITD peer

ip

ITD peer ip

ip-addr

NICE node IP prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-inout

peer ip

[no] peer ip <ip-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

peer

ITD peer

ip

ITD peer ip

ip-addr

NICE node IP prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-inout

peer local service

[no] peer local service <service-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

peer

Peer cli for sandwich mode failure notification

local

Peer involved in sandwich mode

service

Peer service involved in sandwich mode

service-name

Peer service name string

Command Mode

- /exec/configure/itd

peer vdc service

[no] peer vdc <vdc-id> service <service-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

peer

Peer cli for sandwich mode failure notification

vdc

Peer VDC involved in sandwich mode

service

Peer service involved in sandwich mode

vdc-id

VDC name of peer VDC

service-name

Peer service name string

Command Mode

- /exec/configure/itd

peer vdc service

[no] peer vdc <vdc-id> service <service-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

peer

Peer cli for sandwich mode failure notification

vdc

Peer VDC involved in sandwich mode

service

Peer service involved in sandwich mode

vdc-id

VDC name of peer VDC

service-name

Peer service name string

Command Mode

- /exec/configure/itd

perf

perf [ { record { context-switch | profile } { system | process <i0> } [ <s1> ] } | { stop { all | <s0> } } | { list } | { create-archive <s2> } | { remove { all | <s3> } } ]

Syntax Description

perf

Run perf tool to collect or process event data

record

(Optional) Record events to a file for later analysis

stop

(Optional) Stop a perf record.

list

(Optional) List recorded datasets

create-archive

(Optional) Create an archive of dataset for download

remove

(Optional) Remove recorded dataset(s)

all

(Optional) Act on all recorded datasets

context-switch

(Optional) Record context-switch events

profile

(Optional) Record periodic runtime samples

system

(Optional) Record events for all processes on all CPUS

process

(Optional) Record events for a specific process with the given pid

i0

(Optional) pid of process to record events

s0

(Optional) id of perf record session to stop

s1

(Optional) id to use for perf record session

s2

(Optional) id of perf dataset to create an archive

s3

(Optional) id of perf dataset to remove

Command Mode

- /exec

periodic-inventory notification

[no] periodic-inventory notification

Syntax Description

no

(Optional) Negate a command or set its defaults

periodic-inventory

Configure periodic software inventory message dispatch

notification

Enable periodic software inventory message dispatch

Command Mode

- /exec/configure/callhome

periodic-inventory notification interval

periodic-inventory notification { interval <i0> | timeofday <s0> }

Syntax Description

periodic-inventory

Configure periodic software inventory message dispatch

notification

Enable periodic software inventory message dispatch

interval

Configure the time period for periodic inventory

i0

Time period in days (default is 7 days)

timeofday

Configure the timeofday for periodic inventory in HH:MM format

s0

Time period in HH:MM format

Command Mode

- /exec/configure/callhome

periodic to

{ [ <seqno> ] | no } periodic { { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } + | daily | weekdays | weekend } <stime> to <etime>

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

periodic

Periodic time and date

Monday

Monday

Tuesday

Tuesday

Wednesday

Wednesday

Thursday

Thursday

Friday

Friday

Saturday

Saturday

Sunday

Sunday

daily

Every day of the week

weekdays

Monday thru Friday

weekend

Saturday and Sunday

stime

Starting time

to

Ending day and time

etime

Ending time

Command Mode

- /exec/configure/timerange

periodic to

{ [ <seqno> ] | no } periodic { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } <stime> to { <eday> } <etime>

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

periodic

Periodic time and date

Monday

Monday

Tuesday

Tuesday

Wednesday

Wednesday

Thursday

Thursday

Friday

Friday

Saturday

Saturday

Sunday

Sunday

eday

Day of the week

stime

Starting time

to

Ending day and time

etime

Ending time

Command Mode

- /exec/configure/timerange

permit

[no] permit { <proto_icmp> | <proto_igmp> | <proto_ip> | <proto_all> | { { <proto_tcp> | <proto_udp> } [ { src <src_port_op> <src_port1_num> } | { src <src_port_range_op> <src_port1_num> <src_port2_num> } ] [ { { dest | dst } <dest_port_op> <dest_port1_num> } | { { dest | dst } <dest_port_range_op> <dest_port1_num> <dest_port2_num> } ] } } [ log ]

Syntax Description

permit

Permit

proto_tcp

Protocol

proto_udp

Protocol

proto_icmp

Protocol

proto_igmp

Protocol

proto_ip

Protocol

proto_all

Protocol

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port_range_op

(Optional) Source Port-Range operator

dest_port_range_op

(Optional) Destination Port-Range operator

src_port1_num

(Optional) Source port number

src_port2_num

(Optional) Source port number

dest_port1_num

(Optional) Destination port number

dest_port2_num

(Optional) Destination port number

src

(Optional) Configure source port parameters

dest

(Optional) Configure destination port parameters

dst

(Optional) Configure destination port parameters

log

(Optional) Log matches against this entry

Command Mode

- /exec/configure/rbacl

permit interface

[no] permit interface <if0>

Syntax Description

no

(Optional) Negate a command or set its defaults

permit

Permit access to interfaces (applicable if interface policy is 'deny')

interface

Enter the range of interfaces accessible the role

if0

Enter the interface range

Command Mode

- /exec/configure/role/interface

permit vlan

[no] permit vlan <vlan-mrange>

Syntax Description

no

(Optional) Negate a command or set its defaults

permit

Permit access to vlans (applicable if vlan policy is 'deny')

vlan

Enter the range of vlans accessible the role

vlan-mrange

Enter the vlan range

Command Mode

- /exec/configure/role/vlan

permit vrf

[no] permit vrf <vrf-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

permit

Permit access to vrf (applicable if vrf policy is 'deny')

vrf

Enter the range of vrf accessible the role

vrf-name

Enter the vrf name

Command Mode

- /exec/configure/role/vrf

permit vsan

[no] permit vsan <vsan-mrange>

Syntax Description

no

(Optional) Negate a command or set its defaults

permit

Permit access to vsans (applicable if vsan policy is 'deny')

vsan

Enter the range of vsans accessible the role

vsan-mrange

Enter the vsan range

Command Mode

- /exec/configure/role/vsan

personality

[no] personality

Syntax Description

no

(Optional) Negate a mode

personality

Config Personality

Command Mode

- /exec/configure

personality backup

personality backup { <uri_local> | <uri_remote> [ password <password> ] [ vrf <vrf-known-name> ] }

Syntax Description

personality

personality

backup

backup personality

password

(Optional) The password for personality backups

vrf

(Optional) The VRF for personality backups

uri_local

Personality backup local destination

uri_remote

Personality backup remote destination

password

(Optional) Password for SCP username

vrf-known-name

(Optional) VRF name

Command Mode

- /exec

personality restore

personality restore <uri> [ user-name <user> ] [ password <password> ] [ hostname <hostname> ] [ vrf <vrf_name> ]

Syntax Description

personality

Personality

restore

Restore the personality file

uri

Personality file

user-name

(Optional) The username for downloads

user

(Optional) The username

password

(Optional) The password for downloads

password

(Optional) The password

hostname

(Optional) The hostname for downloads

hostname

(Optional) The hostname

vrf

(Optional) The VRF for downloads

vrf_name

(Optional) The VRF name

Command Mode

- /exec

phone-contact

{ phone-contact <s0> | no phone-contact }

Syntax Description

no

Negate a command or set its defaults

phone-contact

Contact person's phone number

s0

Phone number in international format(such as +1-800-123-4567)

Command Mode

- /exec/configure/callhome

ping

ping [ { { <alpha> | <numeric> [ loopback interface <interface> ] } | { multicast <group> interface <interface> [ loopback ] } } [ [ source-interface <src-intf> | vrf { <vrf-name> | <vrf-known-name> } ] [ count { <count> | unlimited } | packet-size <packetsize> | vrf { <vrf-name> | <vrf-known-name> } | interval <interval> | source { <alpha> | <numeric1> } | df-bit | timeout <timeout> ] + | [ count { <count> | unlimited } | packet-size <packetsize> | source-interface <src-intf> | interval <interval> | df-bit | timeout <timeout> ] + ] ]

Syntax Description

ping

Test

count

(Optional) Number

unlimited

(Optional) Unlimited

count

(Optional) Number

packet-size

(Optional) Packet

packetsize

(Optional) Size

source-interface

(Optional) Select source interface

src-intf

(Optional) Specify interface

interval

(Optional) Wait

interval

(Optional) Interval

numeric

(Optional) IP address of remote system

numeric1

(Optional) IP

alpha

(Optional) Enter

multicast

(Optional) Multicast

group

(Optional) Multicast

interface

(Optional) Interface

interface

(Optional) Interface

loopback

(Optional) Receive

source

(Optional) Source

df-bit

(Optional) Enable

timeout

(Optional) Specify

timeout

(Optional) Timeout

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

ping6

ping6 { { <host> | <hostname> } | { multicast <group> } } [ [ { count { <count> | unlimited } } | { packet-size <packetsize> } | [ source { <host1> | <hostname> } ] | vrf { <vrf-name> | <vrf-known-name> } | timeout <timeout> | { interval <interval> } ] + | [ { count { <count> | unlimited } } | { packet-size <packetsize> } | { source-interface <src-intf> } | timeout <timeout> | { interval <interval> } ] + ]

Syntax Description

ping6

Test

count

(Optional) Number

count

(Optional) Number

unlimited

(Optional) unlimited

packet-size

(Optional) Packet

packetsize

(Optional) Size

source-interface

(Optional) Select source interface

src-intf

(Optional) Specify interface

interval

(Optional) Wait

interval

(Optional) Interval

hostname

Enter

multicast

Multicast

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source

(Optional) Source

timeout

(Optional) Specify

timeout

(Optional) Timeout

Command Mode

- /exec

ping nve

ping nve { { { { { ip { <numeric10> | <numeric11> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> <intfid> } [ profile <pid> ] } [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] [ src-intf <src_if> ] } payload-end ] [ source { <numeric1> | <numeric2> } |

Syntax Description

{

<count>

ping

Test

nve

network virtualization edge

numeric10

Ipv4 address of remote host / VTEP

unknown

Peer vtep ip is unknown, Applicable only for channel Nv03

dot1qid

Encapsulation dot1q/bd on which the mac is learnt

intfid

Name of the interface for ngoam ping on which dot1q is configured

payload

(Optional) Enter customer payload

port

(Optional) L4 port info

sport

(Optional) Source port

dport

(Optional) Destination port

proto

(Optional) Protocol

proto-id

(Optional) IANA Protocol id

src-intf

(Optional) Interface on which the host with src ip of the payload is connected

src_if

(Optional) Interface

payload-end

(Optional) End of payload info

profile

(Optional) NGOAM profile to use

pid

(Optional) NGOAM profile id

mac

Mac

mac-addr

(Optional) Mac

ip

ip address

dstip

(Optional) Destination ipv4 address

srcip

(Optional) source ipv4 address

ipv6

(Optional) ipv6 address

dmac

Destination mac address

dstmac

(Optional) Destination mac address

smac

(Optional) Source mac address

dot1q

(Optional) Encapsulation dot1q/bd

dot1q-id

(Optional) Encapsulation dot1q/bd on which the mac is learnt

dot1qid1

(Optional) Encapsulation dot1q/bd on which the mac is learnt

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source

(Optional) Source

numeric1

(Optional) IP

Command Mode

- /exec

pinning max-links

pinning max-links <max-flinks> | no pinning max-links

Syntax Description

no

Negate the command

pinning

Pinning configurations

max-links

Number of Fabric links

max-flinks

Number of fabric links

Command Mode

- /exec/configure/fex handle auto 619

pinning mode

pinning mode [ static | dynamic | least-used | static-dist ] | no pinning mode

Syntax Description

no

Negate the command

pinning

Pinning configurations

mode

Pinning mode

static

(Optional) Static pinning mode

dynamic

(Optional) Dynamic pinning mode

least-used

(Optional) Least used pinning mode

static-dist

(Optional) Static uneven pinning mode

Command Mode

- /exec/configure/fex

pktmgr cache disable

{ [ no ] pktmgr cache disable }

Syntax Description

no

(Optional) Negate a command or set its defaults

pktmgr

packet manager

cache

Disable cache

disable

Disable cache

Command Mode

- /exec/configure

pktmgr discard

{ [ no ] pktmgr discard [ type <type> ] [ direction <direction> ] [ detail ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

pktmgr

packet manager

discard

discard CPI-bound output packets

detail

(Optional) detailed discard info

direction

(Optional) pm debug-filter direction

direction

(Optional) pm direction

type

(Optional) Driver type

type

(Optional) Driver type

Command Mode

- /exec

platform access-list capture

[no] { platform | hardware } access-list capture

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

access-list

Access Control List

capture

Configure ACL capture

Command Mode

- /exec/configure

platform access-list fp_dnl

[no] { platform | hardware } access-list fp_dnl

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

access-list

Access control list

fp_dnl

Fabric path - do not learn mac from broadcast

Command Mode

- /exec/configure

platform access-list update

[no] { platform | hardware } access-list update { { atomic [ strict ] } | { default-result permit } }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

access-list

Access Control List

update

Configure atomic/non-atomic update and default-result

atomic

Enable atomic update of access-list in hardware

strict

(Optional) Strict check on TCAM size for using mutliple features

default-result

Default access-list result during non-atomic hardware update

permit

Permit all packets during non-atomic update

Command Mode

- /exec/configure

platform fabricpath mac-learning module

[no] { platform | hardware } fabricpath mac-learning module <module> [ port-group { 1-4 | 5-8 | 9-12 | 13-16 | 17-20 | 21-24 | 25-28 | 29-32 | 33-36 | 37-40 | 41-44 | 45-48 } + ]

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

fabricpath

Fabric Path

mac-learning

MAC Learning

module

Specify a module number

module

Specify a module number

port-group

(Optional) Port Group

Command Mode

- /exec/configure

platform forwarding interface statistics mode mpls

[no] { platform | hardware } forwarding interface statistics mode { mpls | default } [ module <module-num> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

forwarding

Hardware forwarding

interface

Interface

statistics

Statistics

mode

Statistics mode

mpls

Mpls mode

default

Default mode

module

(Optional) Specify a module number

module-num

(Optional) Specify a module number

Command Mode

- /exec/configure

platform forwarding layer-2 f1 exclude supervisor

[no] { platform | hardware } forwarding layer-2 f1 exclude supervisor

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

forwarding

Forwarding information

layer-2

L2 only mode

f1

N7K-F132XP-15 module

exclude

Exclude supervisor from getting copies of ARP and multicast packets

supervisor

Supervisor module

Command Mode

- /exec/configure

platform ip verify

[no] { platform | hardware } ip verify { address { source { broadcast | multicast } | class-e | destination { zero } | identical | reserved } | checksum | protocol | fragment | length { minimum | consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version | syslog }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

ip

IP

verify

Enable IPv4 and some IPv6 packet validation checks in hardware

address

IPv4 Source and destination address validation

source

Check source address

broadcast

Source address is 255.255.255.255

multicast

Source address is 224.x.x.x

destination

Check destination address

zero

Destination address is 0.0.0.0

class-e

Class E IDS check

identical

Same IP SA and DA

reserved

Source address is 127.x.x.x

checksum

Verify IPv4 and IPv6 packet checksum

protocol

Verify IP procotol

fragment

Check IPv4 and IPv6 fragment with non-zero offset and DF bit active

length

Validate IPv4 packet header and payload length

minimum

Minimum IPv4 header length

consistent

Actual frame size is equal to or more than IPv4 length plus ethernet header

maximum

Check max fragment offset and payload length

max-frag

Fragment offset field value

udp

Maximum UDP length has to be less than IPv4 payload length

max-tcp

Maximum TCP length has to be less than IPv4 payload length

tcp

Validate TCP packet header

tiny-frag

Check TCP tiny fragment

version

Must be 4 for an ethertype of IPv4 (0x0800)

syslog

Syslog Messages logging configuration for IDS check drops

Command Mode

- /exec/configure

platform ipv6 verify

[no] { platform | hardware } ipv6 verify { length { consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

ipv6

IPv6

verify

Enable IPv6 packet validation checks in hardware

length

Validate IPv6 packet header and payload length

consistent

Actual frame size is equal to or more than IPv6 length plus ethernet header

maximum

Check max fragment offset and payload length

max-frag

Fragment offset field value

udp

Maximum UDP length has to be less than IPv6 payload length

max-tcp

Maximum TCP length has to be less than IPv6 payload length

tcp

Validate TCP packet header

tiny-frag

Check TCP tiny fragment

version

Must be 6 for an ethertype of IPv6 (0x86DD)

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { dynamic-packet-prioritization age-period <period> usec [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

dynamic-packet-prioritization

Dynamic Packet Prioritization

age-period

Aging Period

period

Aging Period

usec

micro seconds

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { afd profile <prof-opts> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

afd

Approximate Fair Dropping

profile

AFD profiles

prof-opts

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { min-buffer qos-group <buff-prof-opts> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

min-buffer

minimum/reserved buffer selection

qos-group

Qos Group

buff-prof-opts

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { ns-mcq3-alias qos-group <qos-grp-val> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure QoS related configuration

ns-mcq3-alias

Select qos-group to which to divert qos-group-3 Multicast traffic

qos-group

Qos Group

qos-grp-val

QoS group value

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { ing-pg-hdrm-reserve percent <percent-val> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

ing-pg-hdrm-reserve

Set Ingress PG Headroom reservation

percent

PG Headroom reservation percent

percent-val

percent of PG Headroom to reserve

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { burst-detect max-records <val> }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

burst-detect

Set OOBST burst monitor configs

max-records

Set OOBST burst monitor max records

val

maximum number of records to monitor

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { oq-drops type <sel> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

oq-drops

per output queue drops

type

type of drops - occ/wred/both

sel

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { dynamic-packet-prioritization max-num-pkts <pkts> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

dynamic-packet-prioritization

Dynamic Packet Prioritization

max-num-pkts

Maximum number of packets prioritized

pkts

Number of packets

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { etrap age-period <period> usec [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

etrap

Elephant Trap

age-period

Aging Period

period

Aging Period

usec

micro seconds

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { etrap byte-count <count> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

etrap

Elephant Trap

byte-count

Number of bytes to become elephant flow

count

Number of bytes

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { etrap bandwidth-threshold <bw> bytes [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

etrap

Elephant Trap

bandwidth-threshold

Bandwidth threshold for elephant flow

bw

Number of bytes

bytes

Bytes

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos

[no] { platform | hardware } qos { buffer input peak <sel> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

buffer

buffer config

input

input buffer

peak

peak counter type

sel

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos buffer peak monitor counter0 class

[no] { platform | hardware } qos buffer peak monitor counter0 class <classes>

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

buffer

buffer config

peak

Configure peak control

monitor

monitor peak

counter0

selecting counter 0 for assigning classes

class

class(es) to monitor

classes

qos-group

Command Mode

- /exec/configure

platform qos buffer peak monitor counter1 class

[no] { platform | hardware } qos buffer peak monitor counter1 class { <classes> | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

buffer

buffer config

peak

Configure peak control

monitor

monitor peak

counter1

selecting counter 1 for assigning classes

class

class(es) to monitor

classes

qos-group

none

none

Command Mode

- /exec/configure

platform qos classify ns-only

[no] { platform | hardware } qos classify ns-only

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Quality Of Service

classify

Configure qos classification

ns-only

Enable qos classification on NS only in hardware

Command Mode

- /exec/configure

platform qos eoq

[no] { platform | hardware } qos eoq { stats-class qos-group { all | <qos-grp-val> } [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure QoS related configuration

eoq

Extended Output Queue(EOQ) related configuration

stats-class

Select class for which to report the statistics

qos-group

Qos Group

qos-grp-val

QoS group value

all

all Qos Groups

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos include ipg

[no] { platform | hardware } qos include { ipg [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

include

include specific configaration param

ipg

Select whether to include IPG in Shaping/Policing

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos ing

[no] { platform | hardware } qos { ing-pg-no-min [ pgmin <pgmin> ] [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

ing-pg-no-min

Enable PG Min

pgmin

(Optional) Set PG Min Value

pgmin

(Optional) PG Min Value

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos ing

[no] { platform | hardware } qos { ing-pg-share [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

ing-pg-share

Select Ingress PG Shared Buffer Usage

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos mac ipg

{ platform | hardware } qos mac ipg <val> | no { platform | hardware } qos mac ipg [ <val> ]

Syntax Description

no

Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

mac

MAC

ipg

Mac IPG Value

val

new Mac IPG value in byte

Command Mode

- /exec/configure

platform qos nodrop-PG-thresholds PG-size Red-threshold Yellow-threshold Green-threshold

[no] { platform | hardware } qos nodrop-PG-thresholds PG-size <pg-total> Red-threshold <pg-red> Yellow-threshold <pg-yellow> Green-threshold <pg-green>

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

nodrop-PG-thresholds

Configure No-drop Pool Group thresholds

PG-size

Configure No-drop Pool Group size

pg-total

Pool Group size

Red-threshold

Configure No-drop PG red threshold

pg-red

PG red threshold

Yellow-threshold

Configure No-drop PG yellow threshold

pg-yellow

PG yellow threshold

Green-threshold

Configure No-drop PG green threshold

pg-green

PG green threshold

Command Mode

- /exec/configure

platform qos nodrop-queue-thresholds Queue-yellow Queue-green

[no] { platform | hardware } qos nodrop-queue-thresholds Queue-yellow <q-yellow> Queue-green <q-green>

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

nodrop-queue-thresholds

Configure No-drop PG's Queue thresholds

Queue-yellow

Configure No-drop queue yellow threshold

q-yellow

Queue yellow threshold

Queue-green

Configure No-drop PG green threshold

q-green

PG green threshold

Command Mode

- /exec/configure

platform qos ns

[no] { platform | hardware } qos { ns-buffer-profile <buff-prof-opts> [ module <module> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

ns-buffer-profile

NorthStar buffer absorption profiles

buff-prof-opts

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

platform qos q-noise percent

[no] { platform | hardware } qos q-noise percent <noise>

Syntax Description

no

(Optional) Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

qos

Configure qos related configuration

q-noise

Configure noise thresholds

percent

Noise threshold in percentage of dynamic/static queue_max

noise

Noise percent

Command Mode

- /exec/configure

platform rate-limiter

{ platform | hardware } rate-limiter { layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 { <l2-opts> } | <opts> | f1 <f1-opts> } { <pps> [ burst <burst> ] | disable } [ module <module> [ port <start> <end> ] ] | no { platform | hardware } rate-limiter { layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 { <l2-opts> } | <opts> | f1 <f1-opts> } [ disable ] [ <pps> ] [ burst <burst> ] [ module <module> [ port <start> <end> ] ]

Syntax Description

no

Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

rate-limiter

Configure Rate-Limiter for packets forwarded

layer-3

Layer-3 control and Routed packets

l3-opts

multicast

Multicast data packets

mcast-opts

layer-2

Layer-2 control and Bridged packets

l2-opts

opts

pps

value in kbits per sec

f1

Control packets from F1 modules to supervisor

f1-opts

disable

Disable the rate-limiter

module

(Optional) Specify a module number

module

(Optional) Specify a module number

port

(Optional) Port range

start

(Optional) Port start index

end

(Optional) Port end index

burst

(Optional) Modify burst parameter

burst

(Optional) value of burst size

Command Mode

- /exec/configure

platform rate-limiter

{ platform | hardware } rate-limiter { layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 { <l2-opts> } | <opts> | f1 <f1-opts> } { <pps> [ burst <burst> ] | disable } [ module <module> [ port <start> <end> ] ] | no { platform | hardware } rate-limiter { layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 { <l2-opts> } | <opts> | f1 <f1-opts> } [ disable ] [ <pps> ] [ burst <burst> ] [ module <module> [ port <start> <end> ] ]

Syntax Description

no

Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

rate-limiter

Configure Rate-Limiter for packets forwarded

layer-3

Layer-3 control and Routed packets

l3-opts

multicast

Multicast data packets

mcast-opts

layer-2

Layer-2 control and Bridged packets

l2-opts

opts

pps

value in packets per sec

f1

Control packets from F1 modules to supervisor

f1-opts

disable

Disable the rate-limiter

module

(Optional) Specify a module number

module

(Optional) Specify a module number

port

(Optional) Port range

start

(Optional) Port start index

end

(Optional) Port end index

burst

(Optional) Modify burst parameter

burst

(Optional) value of burst size

Command Mode

- /exec/configure

platform rate-limiter access-list-log

{ platform | hardware } rate-limiter access-list-log { <pps> [ burst <burst> ] | disable } [ module <module> [ port <start> <end> ] ] | no { platform | hardware } rate-limiter access-list-log [ disable ] [ <pps> ] [ burst <burst> ] [ module <module> [ port <start> <end> ] ]

Syntax Description

no

Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

rate-limiter

Configure Rate-Limiter for packets forwarded

access-list-log

Packets copied to supervisor for access-list logging

pps

value in packets per sec

disable

Disable the rate-limiter

module

(Optional) Specify a module number

module

(Optional) Specify a module number

port

(Optional) Port range

start

(Optional) Port start index

end

(Optional) Port end index

burst

(Optional) Modify burst parameter

burst

(Optional) value of burst size

Command Mode

- /exec/configure

platform rate-limiter span-egress

{ platform | hardware } rate-limiter span-egress <rate> [ module <module> ] | no { platform | hardware } rate-limiter span-egress [ <rate> ] [ module <module> ]

Syntax Description

no

Negate a command or set its defaults

platform

Platform configuration commands

hardware

Hardware Internal Information

rate-limiter

Configure Rate-Limiter for packets forwarded

span-egress

SPAN/ERSPAN egress packets

rate

value in kbit per sec

module

(Optional) Specify a module number

module

(Optional) Specify a module number

Command Mode

- /exec/configure

plugin-test load

plugin-test load <uri0> [ [ <uri1> ] [ <uri2> ] ]

Syntax Description

plugin-test

PLUGIN test

load

PLUGIN test load

uri0

Enter image name

uri1

(Optional) Enter image name

uri2

(Optional) Enter image name

Command Mode

- /exec

plugin-test unload

plugin-test unload <s0> [ [ <s1> ] [ <s2> ] ]

Syntax Description

plugin-test

PLUGIN test

unload

plugin test unload

s0

Enter swid

s1

(Optional) Enter swid

s2

(Optional) Enter swid

Command Mode

- /exec

police

[no] police { { [ cir ] { <cir-val> [ bps | kbps | mbps | gbps ] | percent <cir-perc> } [ [ bc ] { <committed-burst> [ bytes | kbytes | mbytes | ms | us ] } ] [ pir { <pir-val> [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent <pir-perc> } [ [ be ] { <extended-burst> [ bytes2 | kbytes2 | mbytes2 | ms2 | us2 | packets2 ] } ] ] [ conform { transmit | set-prec-transmit { <prec-val> | <prec-enum> } | set-dscp-transmit { <dscp-val> | <dscp-enum> } | set-cos-transmit <cos-val> | set-discard-class-transmit <disc-class-val> | set-qos-transmit <qos-grp-val> | set-mpls-exp-imposition-transmit <exp-value-imp> | set-mpls-exp-topmost-transmit <exp-value-top> } [ exceed { transmit1 | drop1 | set <exc-frm-field> <exc-to-field> table cir-markdown-map | set-prec-transmit1 { <prec-val1> | <prec-enum1> } | set-dscp-transmit1 { <dscp-val1> | <dscp-enum1> } | set-cos-transmit1 <cos-val1> | set-discard-class-transmit1 <disc-class-val1> | set-qos-transmit1 <qos-grp-val1> | set-mpls-exp-imposition-transmit1 <exp-value-imp1> | set-mpls-exp-topmost-transmit1 <exp-value-top1> } ] [ violate { drop2 | set <vio-frm-field> <vio-to-field> table2 pir-markdown-map | set-prec-transmit2 { <prec-val2> | <prec-enum2> } | set-dscp-transmit2 { <dscp-val2> | <dscp-enum2> } | set-cos-transmit2 <cos-val2> | set-discard-class-transmit2 <disc-class-val2> | set-qos-transmit2 <qos-grp-val2> | set-mpls-exp-imposition-transmit2 <exp-value-imp2> | set-mpls-exp-topmost-transmit2 <exp-value-top2> } ] ] } | aggregate <policer-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

police

police

cir

(Optional) Specify committed information rate

bc

(Optional) Specify committed burst

percent

Specify rate as percentage of interface data-rate

cir-perc

Percentage

pir-perc

(Optional) Percentage

pir

(Optional) Specify peak information rate

be

(Optional) Specify extended burst (for 1R3C meter)

bps

(Optional) Bits per second

kbps

(Optional) Kilo bits per second

mbps

(Optional) Mega bits per second

gbps

(Optional) Giga bits per second

bps2

(Optional) Bits per second

kbps2

(Optional) Kilo Bits per second

mbps2

(Optional) Mega Bits per second

gbps2

(Optional) Giga Bits per second

pps2

(Optional) Packets per second

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

us

(Optional) Micro second(s)

ms

(Optional) Milli second(s)

bytes2

(Optional) Bytes

kbytes2

(Optional) Kilo Bytes

mbytes2

(Optional) Mega Bytes

ms2

(Optional) Milli seconds

us2

(Optional) Micro seconds

packets2

(Optional) Packets

conform

(Optional) Specify a conform action

exceed

(Optional) Specify a exceed action

violate

(Optional) Specify a violate action

transmit

(Optional) Transmit packet

transmit1

(Optional) Transmit packet

drop1

(Optional) Drop packet

drop2

(Optional) Drop packet

set-prec-transmit

(Optional) Set precedence and send it

set-prec-transmit1

(Optional) Set precedence and send it

set-prec-transmit2

(Optional) Set precedence and send it

prec-val

(Optional) Precedence value

prec-val1

(Optional) Precedence value

prec-val2

(Optional) Precedence value

prec-enum

(Optional)

prec-enum1

(Optional)

prec-enum2

(Optional)

set-dscp-transmit

(Optional) Set dscp and send it

set-dscp-transmit1

(Optional) Set dscp and send it

set-dscp-transmit2

(Optional) Set dscp and send it

dscp-val

(Optional) DSCP value

dscp-val1

(Optional) DSCP value

dscp-val2

(Optional) DSCP value

dscp-enum

(Optional)

dscp-enum1

(Optional)

dscp-enum2

(Optional)

set-cos-transmit

(Optional) Set cos and send it

set-cos-transmit1

(Optional) Set cos and send it

set-cos-transmit2

(Optional) Set cos and send it

cos-val

(Optional) new cos value

cos-val1

(Optional) new cos value

cos-val2

(Optional) new cos value

set-discard-class-transmit

(Optional) Set discard class and send it

set-discard-class-transmit1

(Optional) Set discard class and send it

set-discard-class-transmit2

(Optional) Set discard class and send it

disc-class-val

(Optional) new discard-class value

disc-class-val1

(Optional) new discard-class value

disc-class-val2

(Optional) new discard-class value

set-qos-transmit

(Optional) Set qos-group and send it

set-qos-transmit1

(Optional) Set qos-group and send it

set-qos-transmit2

(Optional) Set qos-group and send it

qos-grp-val

(Optional) QoS group value

qos-grp-val1

(Optional) QoS group value

qos-grp-val2

(Optional) QoS group value

set-mpls-exp-imposition-transmit

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit1

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit2

(Optional) set-mpls-exp-imposition-transmit

exp-value-imp

(Optional) MPLS imposition value

exp-value-imp1

(Optional) MPLS imposition value

exp-value-imp2

(Optional) MPLS imposition value

set-mpls-exp-topmost-transmit

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit1

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit2

(Optional) Set MPLS topmost label

exp-value-top

(Optional) MPLS topmost value

exp-value-top1

(Optional) MPLS topmost value

exp-value-top2

(Optional) MPLS topmost value

set

(Optional) Set a particular value using table or markdown map

exc-frm-field

(Optional)

exc-to-field

(Optional)

vio-frm-field

(Optional)

vio-to-field

(Optional)

table

(Optional) Set using the table-map

table2

(Optional) Set using the table-map

cir-markdown-map

(Optional) Markdown map table name for exceed action

pir-markdown-map

(Optional) Markdown map table name for violate action

aggregate

Choose aggregate policer for current class

policer-name

Enter aggregate-policer name

Command Mode

- /exec/configure/policy-map/class

police

[no] police { { [ cir ] { <cir-val> [ bps | kbps | mbps | gbps | pps ] | percent <cir-perc> } [ [ bc ] { <committed-burst> [ bytes | kbytes | mbytes | ms | us | packets ] } ] [ pir { <pir-val> [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent <pir-perc> } [ [ be ] { <extended-burst> [ bytes2 | kbytes2 | mbytes2 | ms2 | us2 | packets2 ] } ] ] [ conform { transmit | set-prec-transmit { <prec-val> | <prec-enum> } | set-dscp-transmit { <dscp-val> | <dscp-enum> } | set-cos-transmit <cos-val> | set-discard-class-transmit <disc-class-val> | set-qos-transmit <qos-grp-val> | set-mpls-exp-imposition-transmit <exp-value-imp> | set-mpls-exp-topmost-transmit <exp-value-top> } ] [ exceed { transmit1 | drop1 | set <exc-frm-field> <exc-to-field> table cir-markdown-map | set-prec-transmit1 { <prec-val1> | <prec-enum1> } | set-dscp-transmit1 { <dscp-val1> | <dscp-enum1> } | set-cos-transmit1 <cos-val1> | set-discard-class-transmit1 <disc-class-val1> | set-qos-transmit1 <qos-grp-val1> | set-mpls-exp-imposition-transmit1 <exp-value-imp1> | set-mpls-exp-topmost-transmit1 <exp-value-top1> } ] [ violate { drop2 | set <vio-frm-field> <vio-to-field> table2 pir-markdown-map | set-prec-transmit2 { <prec-val2> | <prec-enum2> } | set-dscp-transmit2 { <dscp-val2> | <dscp-enum2> } | set-cos-transmit2 <cos-val2> | set-discard-class-transmit2 <disc-class-val2> | set-qos-transmit2 <qos-grp-val2> | set-mpls-exp-imposition-transmit2 <exp-value-imp2> | set-mpls-exp-topmost-transmit2 <exp-value-top2> } ] } | aggregate <policer-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

police

police

cir

(Optional) Specify committed information rate

bc

(Optional) Specify committed burst

percent

Specify rate as percentage of interface data-rate

cir-perc

Percentage

pir-perc

(Optional) Percentage

pir

(Optional) Specify peak information rate

be

(Optional) Specify extended burst (for 1R3C meter)

bps

(Optional) Bits per second

kbps

(Optional) Kilo bits per second

mbps

(Optional) Mega bits per second

gbps

(Optional) Giga bits per second

pps

(Optional) Packets per second

bps2

(Optional) Bits per second

kbps2

(Optional) Kilo Bits per second

mbps2

(Optional) Mega Bits per second

gbps2

(Optional) Giga Bits per second

pps2

(Optional) Packets per second

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

us

(Optional) Micro second(s)

ms

(Optional) Milli second(s)

packets

(Optional) Packets

bytes2

(Optional) Bytes

kbytes2

(Optional) Kilo Bytes

mbytes2

(Optional) Mega Bytes

ms2

(Optional) Milli seconds

us2

(Optional) Micro seconds

packets2

(Optional) Packets

conform

(Optional) Specify a conform action

exceed

(Optional) Specify a exceed action

violate

(Optional) Specify a violate action

transmit

(Optional) Transmit packet

transmit1

(Optional) Transmit packet

drop1

(Optional) Drop packet

drop2

(Optional) Drop packet

set-prec-transmit

(Optional) Set precedence and send it

set-prec-transmit1

(Optional) Set precedence and send it

set-prec-transmit2

(Optional) Set precedence and send it

prec-val

(Optional) Precedence value

prec-val1

(Optional) Precedence value

prec-val2

(Optional) Precedence value

prec-enum

(Optional)

prec-enum1

(Optional)

prec-enum2

(Optional)

set-dscp-transmit

(Optional) Set dscp and send it

set-dscp-transmit1

(Optional) Set dscp and send it

set-dscp-transmit2

(Optional) Set dscp and send it

dscp-val

(Optional) DSCP value

dscp-val1

(Optional) DSCP value

dscp-val2

(Optional) DSCP value

dscp-enum

(Optional)

dscp-enum1

(Optional)

dscp-enum2

(Optional)

set-cos-transmit

(Optional) Set cos and send it

set-cos-transmit1

(Optional) Set cos and send it

set-cos-transmit2

(Optional) Set cos and send it

cos-val

(Optional) new cos value

cos-val1

(Optional) new cos value

cos-val2

(Optional) new cos value

set-discard-class-transmit

(Optional) Set discard class and send it

set-discard-class-transmit1

(Optional) Set discard class and send it

set-discard-class-transmit2

(Optional) Set discard class and send it

disc-class-val

(Optional) new discard-class value

disc-class-val1

(Optional) new discard-class value

disc-class-val2

(Optional) new discard-class value

set-qos-transmit

(Optional) Set qos-group and send it

set-qos-transmit1

(Optional) Set qos-group and send it

set-qos-transmit2

(Optional) Set qos-group and send it

qos-grp-val

(Optional) QoS group value

qos-grp-val1

(Optional) QoS group value

qos-grp-val2

(Optional) QoS group value

set-mpls-exp-imposition-transmit

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit1

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit2

(Optional) set-mpls-exp-imposition-transmit

exp-value-imp

(Optional) MPLS imposition value

exp-value-imp1

(Optional) MPLS imposition value

exp-value-imp2

(Optional) MPLS imposition value

set-mpls-exp-topmost-transmit

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit1

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit2

(Optional) Set MPLS topmost label

exp-value-top

(Optional) MPLS topmost value

exp-value-top1

(Optional) MPLS topmost value

exp-value-top2

(Optional) MPLS topmost value

set

(Optional) Set a particular value using table or markdown map

exc-frm-field

(Optional)

exc-to-field

(Optional)

vio-frm-field

(Optional)

vio-to-field

(Optional)

table

(Optional) Set using the table-map

table2

(Optional) Set using the table-map

cir-markdown-map

(Optional) Markdown map table name for exceed action

pir-markdown-map

(Optional) Markdown map table name for violate action

aggregate

Choose aggregate policer for current class

policer-name

Enter aggregate-policer name

Command Mode

- /exec/configure/policy-map/class

police

[no] police [ { { [ cir ] { <cir-val> [ <opt_kbps_mbps_gbps_pps_cir> ] | percent <cir-perc> } } { [ { [ bc ] <bc-val> [ <opt_kbytes_mbytes_gbytes_bc> ] } ] } { [ { pir { <pir> [ <opt_kbps_mbps_gbps_pps_pir> ] | percent1 <pir-perc> } } [ { [ be ] <be-val> [ <opt_kbytes_mbytes_gbytes_be> ] } ] ] } { [ { conform { <opt_drop_transmit_conform> | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit { <set-dscp-val> | <opt_set_dscp> } } | { set-prec-transmit { <set-prec-val> | <opt_set_prec> } } } } [ { exceed { <opt_drop_transmit_exceed> | { set dscp1 dscp2 table cir-markdown-map } } } ] [ { violate { <opt_drop_transmit_violate> | { set1 dscp3 dscp4 table1 pir-markdown-map } } } ] ] } } ]

Syntax Description

no

Negate a command or set its defaults

police

Police

cir

(Optional) Specify committed information rate

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional) Specify rate as percentage of interface data-rate

pir

(Optional) Specify peak information rate

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional) Specify rate as percentage of interface data-rate

be

(Optional) Specify extended burst

opt_kbytes_mbytes_gbytes_be

(Optional) Units

bc

(Optional) Specify committed burst

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

conform

(Optional) Specify a conform action

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional) Set conform action cos val

set-cos-val

(Optional) 802.1Q Class of Service value

set-dscp-transmit

(Optional) Set conform action dscp val

set-dscp-val

(Optional) DSCP value

opt_set_dscp

(Optional)

set-prec-transmit

(Optional) Set conform action precedence val

set-prec-val

(Optional) IP Precedence value

opt_set_prec

(Optional)

exceed

(Optional) Specify a exceed action

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional) Set exceed action to cir-markdown-map

dscp1

(Optional) Exceed from field

dscp2

(Optional) Exceed to field

table

(Optional) To specify table name

cir-markdown-map

(Optional) Well known markdown map

violate

(Optional) Specify a violate action

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional) Set violate action to pir-markdown-map

dscp3

(Optional) Violate from field

dscp4

(Optional) Violate to field

table1

(Optional) To specify table name

pir-markdown-map

(Optional) Well known markdown map

Command Mode

- /exec/configure/pmap/class

police

[no] police [ { { [ cir ] { <cir-val> [ <opt_kbps_mbps_gbps_pps_cir> ] | percent <cir-perc> } } { [ { [ bc ] <bc-val> [ <opt_kbytes_mbytes_gbytes_bc> ] } ] } { [ { pir { <pir> [ <opt_kbps_mbps_gbps_pps_pir> ] | percent1 <pir-perc> } } [ { [ be ] <be-val> [ <opt_kbytes_mbytes_gbytes_be> ] } ] ] } { [ { conform { <opt_drop_transmit_conform> | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit { <set-dscp-val> | <opt_set_dscp> } } | { set-prec-transmit { <set-prec-val> | <opt_set_prec> } } } } [ { exceed { <opt_drop_transmit_exceed> | { set dscp1 dscp2 table cir-markdown-map } } } ] [ { violate { <opt_drop_transmit_violate> | { set1 dscp3 dscp4 table1 pir-markdown-map } } } ] ] } } ]

Syntax Description

no

Negate a command or set its defaults

police

Police

cir

(Optional) Specify committed information rate

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional) Specify rate as percentage of interface data-rate

pir

(Optional) Specify peak information rate

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional) Specify rate as percentage of interface data-rate

be

(Optional) Specify extended burst

opt_kbytes_mbytes_gbytes_be

(Optional) Units

bc

(Optional) Specify committed burst

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

conform

(Optional) Specify a conform action

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional) Set conform action cos val

set-cos-val

(Optional) 802.1Q Class of Service value

set-dscp-transmit

(Optional) Set conform action dscp val

set-dscp-val

(Optional) DSCP value

opt_set_dscp

(Optional)

set-prec-transmit

(Optional) Set conform action precedence val

set-prec-val

(Optional) IP Precedence value

opt_set_prec

(Optional)

exceed

(Optional) Specify a exceed action

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional) Set exceed action to cir-markdown-map

dscp1

(Optional) Exceed from field

dscp2

(Optional) Exceed to field

table

(Optional) To specify table name

cir-markdown-map

(Optional) Well known markdown map

violate

(Optional) Specify a violate action

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional) Set violate action to pir-markdown-map

dscp3

(Optional) Violate from field

dscp4

(Optional) Violate to field

table1

(Optional) To specify table name

pir-markdown-map

(Optional) Well known markdown map

Command Mode

- /exec/configure/pmap/class

police police pps

police { [ cir ] { <cir-val> [ <opt_kbps_mbps_gbps_pps_cir> ] | percent <cir-perc> } } { [ { [ bc ] <bc-val> [ <opt_kbytes_mbytes_gbytes_bc> ] } ] } { [ { pir { <pir> [ <opt_kbps_mbps_gbps_pps_pir> ] | percent1 <pir-perc> } } [ { [ be ] <be-val> [ <opt_kbytes_mbytes_gbytes_be> ] } ] ] } { [ { conform { <opt_drop_transmit_conform> | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit { <set-dscp-val> | <opt_set_dscp> } } | { set-prec-transmit { <set-prec-val> | <opt_set_prec> } } } } [ { exceed { <opt_drop_transmit_exceed> | { set dscp1 dscp2 table cir-markdown-map } } } ] [ { violate { <opt_drop_transmit_violate> | { set1 dscp3 dscp4 table1 pir-markdown-map } } } ] ] } | police { pps { <pps-val> } }

Syntax Description

police

Police

cir

(Optional) Specify committed information rate

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

Specify rate as percentage of interface data-rate

pir

(Optional) Specify peak information rate

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional) Specify rate as percentage of interface data-rate

be

(Optional) Specify extended burst

opt_kbytes_mbytes_gbytes_be

(Optional) Units

bc

(Optional) Specify committed burst

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

conform

(Optional) Specify a conform action

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional) Set conform action cos val

set-cos-val

(Optional) 802.1Q Class of Service value

set-dscp-transmit

(Optional) Set conform action dscp val

set-dscp-val

(Optional) DSCP value

opt_set_dscp

(Optional)

set-prec-transmit

(Optional) Set conform action precedence val

set-prec-val

(Optional) IP Precedence value

opt_set_prec

(Optional)

exceed

(Optional) Specify a exceed action

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional) Set exceed action to cir-markdown-map

dscp1

(Optional) Exceed from field

dscp2

(Optional) Exceed to field

table

(Optional) To specify table name

cir-markdown-map

(Optional) Well known markdown map

violate

(Optional) Specify a violate action

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional) Set violate action to pir-markdown-map

dscp3

(Optional) Violate from field

dscp4

(Optional) Violate to field

table1

(Optional) To specify table name

pir-markdown-map

(Optional) Well known markdown map

pps

Specify PPS rate limit

Command Mode

- /exec/configure/pmap/class

police police pps

police { [ cir ] { <cir-val> [ <opt_kbps_mbps_gbps_pps_cir> ] | percent <cir-perc> } } { [ { [ bc ] <bc-val> [ <opt_kbytes_mbytes_gbytes_bc> ] } ] } { [ { pir { <pir> [ <opt_kbps_mbps_gbps_pps_pir> ] | percent1 <pir-perc> } } [ { [ be ] <be-val> [ <opt_kbytes_mbytes_gbytes_be> ] } ] ] } { [ { conform { <opt_drop_transmit_conform> | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit { <set-dscp-val> | <opt_set_dscp> } } | { set-prec-transmit { <set-prec-val> | <opt_set_prec> } } } } [ { exceed { <opt_drop_transmit_exceed> | { set dscp1 dscp2 table cir-markdown-map } } } ] [ { violate { <opt_drop_transmit_violate> | { set1 dscp3 dscp4 table1 pir-markdown-map } } } ] ] } | police { pps { <pps-val> } }

Syntax Description

police

Police

cir

(Optional) Specify committed information rate

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

Specify rate as percentage of interface data-rate

pir

(Optional) Specify peak information rate

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional) Specify rate as percentage of interface data-rate

be

(Optional) Specify extended burst

opt_kbytes_mbytes_gbytes_be

(Optional) Units

bc

(Optional) Specify committed burst

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

conform

(Optional) Specify a conform action

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional) Set conform action cos val

set-cos-val

(Optional) 802.1Q Class of Service value

set-dscp-transmit

(Optional) Set conform action dscp val

set-dscp-val

(Optional) DSCP value

opt_set_dscp

(Optional)

set-prec-transmit

(Optional) Set conform action precedence val

set-prec-val

(Optional) IP Precedence value

opt_set_prec

(Optional)

exceed

(Optional) Specify a exceed action

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional) Set exceed action to cir-markdown-map

dscp1

(Optional) Exceed from field

dscp2

(Optional) Exceed to field

table

(Optional) To specify table name

cir-markdown-map

(Optional) Well known markdown map

violate

(Optional) Specify a violate action

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional) Set violate action to pir-markdown-map

dscp3

(Optional) Violate from field

dscp4

(Optional) Violate to field

table1

(Optional) To specify table name

pir-markdown-map

(Optional) Well known markdown map

pps

Specify PPS rate limit

Command Mode

- /exec/configure/pmap/class

policy-map

[no] policy-map [ type qos ] [ match-first ] <pmap-name-qos>

Syntax Description

no

(Optional) Negate a command or set its defaults

policy-map

Configure a policy map

type

(Optional) Specify the type of this policy-map

qos

(Optional) Qos policy

match-first

(Optional) Take the action for the first class that matches

pmap-name-qos

Policy-map name (alphanumeric)

Command Mode

- /exec/configure

policy-map type control-plane

[no] policy-map type control-plane <pmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

policy-map

Configure a policy map

type

Specify the type of this policy-map

control-plane

Control-Plane

pmap-name

Policy-map name (alphanumeric)

Command Mode

- /exec/configure

policy-map type network-qos

[no] policy-map type network-qos <pmap-name-nq>

Syntax Description

no

(Optional) Negate a command or set its defaults

policy-map

Configure a policy map

type

Specify the type of this policy-map

network-qos

Network QoS policy

pmap-name-nq

Policy-map name

Command Mode

- /exec/configure

policy-map type psp

[no] policy-map type psp { <pmap-name-plc> | { handle <ppf_id> } } [ table <table_type> ] [ client <clienttype> <clientID> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

policy-map

Configure a policy map

type

Specify the type of this policy-map

psp

PSP policy

pmap-name-plc

Policy-map name (alphanumeric)

handle

Handle

ppf_id

PPF ID

table

(Optional) table

table_type

(Optional) Table Type

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

Command Mode

- /exec/configure

policy-map type queuing

[no] policy-map type queuing [ match-first ] <pmap-name-que>

Syntax Description

no

(Optional) Negate a command or set its defaults

policy-map

Configure a policy map

type

Specify the type of this policy-map

queuing

Queuing policy

match-first

(Optional) Take the action for the first class that matches

pmap-name-que

Policy-map name (alphanumeric)

Command Mode

- /exec/configure

policy

policy { { dynamic identity <device-id> } | { static sgt <sgt> [ trusted ] } } | no policy static | no policy dynamic

Syntax Description

policy

Enable and define policy to be applied

dynamic

apply to authorization server for policy

identity

specify identity of peer for authorization request

device-id

peer's device-id

static

configure static policy

sgt

SGT tag for pkts from this device

sgt

sgt value

trusted

(Optional) specify trust state of the link

Command Mode

- /exec/configure/cts-manual

policy

[no] policy <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

policy

NBM Flow policy

name

Policy name

Command Mode

- /exec/configure/nbm-flow

pop

pop [ <name> ]

Syntax Description

pop

pop mode from stack or restore from name

name

(Optional) name

Command Mode

- /global

port-channel bfd destination

port-channel bfd destination <dest-ip> | no port-channel bfd destination [ <dest-ip> ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

bfd

BFD parameters

destination

Configure IP address of BFD peer

dest-ip

BFD peer IPv4 address

Command Mode

- /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

port-channel bfd start

port-channel bfd start <start-timer-value> | no port-channel bfd start [ <start-timer-value> ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

bfd

BFD parameters

start

Start timer timeout value

start-timer-value

BFD start timer timeout value in seconds (default off)

Command Mode

- /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

port-channel bfd track-member-link

port-channel bfd track-member-link | no port-channel bfd track-member-link

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

bfd

Enable BFD

track-member-link

Enable per-member-link BFD on the port-channel interface

Command Mode

- /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

port-channel hash-distribution

port-channel hash-distribution <type> | no port-channel hash-distribution [ <type> ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

hash-distribution

Configure port-channel hash-distribution

type

adaptive/fixed (default adaptive)

Command Mode

- /exec/configure/

port-channel limit

port-channel limit | no port-channel limit

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure the maximum number of supported vPCs

limit

limit to 244 vPCs

Command Mode

- /exec/configure/vpc-domain

port-channel load-balance

port-channel load-balance <bndl_hash> <bndl_sel> [ rotate <po-lb-rotate-range> ] [ concatenation ] [ module <module> | fex all ] [ symmetric ] | no port-channel load-balance [ <bndl_hash> <bndl_sel> [ rotate <po-lb-rotate-range> ] [ concatenation ] [ module <module> | fex all ] [ symmetric ] ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

load-balance

Configure port-channel load balance

bndl_hash

bundle hash

bndl_sel

bundle select

rotate

(Optional) offset the hash-input

po-lb-rotate-range

(Optional) offset the hash-input

concatenation

(Optional) enable/disable concatenation

module

(Optional) Specify a module number

module

(Optional) Specify a module number

fex

(Optional) FEX devices

all

(Optional) Permit all FEX to configure port-channel LB

symmetric

(Optional) symmetric load balancing

Command Mode

- /exec/configure

port-channel load-balance1 ethernet

port-channel load-balance1 ethernet <algorithm> [ symmetric ] | no port-channel load-balance1 ethernet [ <algorithm> [ symmetric ] ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

load-balance1

Configure port-channel load balance

ethernet

Ethernet port-channel

algorithm

Configure port-channel load balance

symmetric

(Optional) symmetric load balancing

Command Mode

- /exec/configure

port-channel load-balance2 resilient

port-channel load-balance2 resilient | no port-channel load-balance2 resilient

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

load-balance2

Configure port-channel load balance

resilient

Configure port-channel load balance resilient mode

Command Mode

- /exec/configure

port-channel load-balance ethernet

port-channel load-balance ethernet <algorithm> [ module <module> ] | no port-channel load-balance ethernet [ <algorithm> [ module <module> ] ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

load-balance

Configure port-channel load balance

ethernet

Ethernet port-channel

module

(Optional) Specify a module number

module

(Optional) Specify a module number

algorithm

Configure port-channel load balance

Command Mode

- /exec/configure

port-channel load-balance hash-modulo-f2

[no] port-channel load-balance hash-modulo-f2

Syntax Description

no

(Optional) Negate a command or set its defaults

port-channel

Configure port channel parameters

load-balance

Configure port-channel load balance

hash-modulo-f2

Enable/disable modulo hash for N7K-F248XP cards

Command Mode

- /exec/configure

port-channel load-balance hash enable

[no] port-channel load-balance hash enable

Syntax Description

no

(Optional) Negate a command or set its defaults

port-channel

Configure port channel parameters

load-balance

Configure port-channel load balance

hash

hash enhancement

enable

enable

Command Mode

- /exec/configure

port-channel load-defer

port-channel load-defer <load-defer-timeout> | no port-channel load-defer [ <load-defer-timeout> ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

load-defer

Load defer time interval

load-defer-timeout

Load defer time interval in seconds (default 120 seconds)

Command Mode

- /exec/configure/

port-channel min-links

port-channel min-links <min-links-number> | no port-channel min-links [ <min-links-number> ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

min-links

Configure the port-channel min-links

min-links-number

Enter the min-link number

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

port-channel port hash-distribution

port-channel port hash-distribution <type> | no port-channel port hash-distribution [ <type> ]

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

port

Configure port-channel port hash-distribution

hash-distribution

Configure port-channel port hash-distribution

type

adaptive/fixed (default adaptive)

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

port-channel port load-defer

port-channel port load-defer | no port-channel port load-defer

Syntax Description

no

Negate a command or set its defaults

port-channel

Configure port channel parameters

port

Configure port-channel load-defer for member ports

load-defer

Configure port-channel load-defer

Command Mode

- /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

port-profile

[no] port-profile [ type <typeval> ] { <profilename> | <s0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

port-profile

Configure a port-profile

profilename

Enter the name of the profile

s0

Enter the name of the profile

type

(Optional) configure type of the profile

typeval

(Optional)

Command Mode

- /exec/configure

port-profile dump

[no] port-profile dump

Syntax Description

no

(Optional) Negate a command or set its defaults

port-profile

Dump port-profile

dump

Dump all additional information from database

Command Mode

- /exec

port-profile no-redirection

[no] port-profile no-redirection

Syntax Description

no

(Optional) Negate a command or set its defaults

port-profile

Show port-profile information

no-redirection

Disable port-profile redirection

Command Mode

- /exec

port-security stop learning

[no] port-security stop learning

Syntax Description

no

(Optional) Negate a command or set its defaults

port-security

Port security related command

stop

stop

learning

learning

Command Mode

- /exec

port

{ port <tportnum> } | { no port [ <tportnum-ignore> ] }

Syntax Description

no

Negate a command or set its defaults

port

Port number

tportnum

Port number, default: 15002

tportnum-ignore

(Optional) Port number, default: 15002

Command Mode

- /exe/configure/onep/tls

port control

[no] port control <port-control-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

port

ITD port

control

control

port-control-name

Port control name

Command Mode

- /exec/configure/itd-inout

port control

[no] port control <port-control-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

port

ITD port

control

control

port-control-name

Port control name

Command Mode

- /exec/configure/itd-inout

port destination

{ port { destination | source } <port> } | { no port { destination | source } }

Syntax Description

no

Negate a command or set its defaults

port

specify flow port address

source

specify flow source port address

destination

specify flow destination port address

port

port number

Command Mode

- /exec/configure/configngoamprofileflow

power efficient-ethernet auto

[no] power efficient-ethernet auto

Syntax Description

no

(Optional) Negate a command or set its defaults

power

Configure EEE for the port

efficient-ethernet

Configure Energy Efficient Ethernet (EEE)

auto

Auto negotiate EEE

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

power efficient-ethernet sleep threshold aggressive

[no] power efficient-ethernet sleep threshold aggressive

Syntax Description

no

(Optional) Negate a command or set its defaults

power

Configure EEE for the port

efficient-ethernet

Configure Energy Efficient Ethernet (EEE)

sleep

EEE LPI sleep configuration

threshold

EEE LPI sleep threshold

aggressive

Enable/ Disable EEE LPI aggressive sleep mode

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

power redundancy-mode combined

[no] power redundancy-mode combined

Syntax Description

no

(Optional) Negate a command or set its defaults

power

Configure power supply

redundancy-mode

Configure power supply redundancy mode

combined

Configure power supply redundancy mode as combined

Command Mode

- /exec/configure

power redundancy-mode combined force

[no] power redundancy-mode combined force

Syntax Description

no

(Optional) Negate a command or set its defaults

power

Configure power supply

redundancy-mode

Configure power supply redundancy mode

combined

Configure power supply redundancy mode as combined

force

Force combined mode without prompting

Command Mode

- /exec/configure

power redundancy-mode insrc-redundant

[no] power redundancy-mode insrc-redundant

Syntax Description

no

(Optional) Negate a command or set its defaults

power

Configure power supply

redundancy-mode

Configure power supply redundancy mode

insrc-redundant

Configure power supply redundancy mode as grid/AC input source redundant

Command Mode

- /exec/configure

power redundancy-mode ps-redundant

[no] power redundancy-mode ps-redundant

Syntax Description

no

(Optional) Negate a command or set its defaults

power

Configure power supply

redundancy-mode

Configure power supply redundancy mode

ps-redundant

Configure power supply redundancy mode as PS redundant

Command Mode

- /exec/configure

power reserve

[no] power reserve <percentage>

Syntax Description

no

(Optional) Negate a command or set its defaults

power

Configure power supply

reserve

Override default power reservation

percentage

please enter a percentage

Command Mode

- /exec/configure

poweroff

[no] poweroff { module <module> | <s0> <santa-cruz-range> }

Syntax Description

no

(Optional) Negate a command or set its defaults

poweroff

Power off a module in the switch

module

enter a module number

module

please enter the module number

s0

Power off a specific xbar

santa-cruz-range

please enter the xbar number

Command Mode

- /exec/configure

pps

pps <pps> <burst> | no pps [ <pps> ] [ <burst> ]

Syntax Description

no

Negate a command or set its defaults

pps

OSPF packets per second

pps

Packets per second value

burst

Burst value

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

pps

pps <pps> <burst> | no pps [ <pps> ] [ <burst> ]

Syntax Description

no

Negate a command or set its defaults

pps

OSPFv3 packets per second

pps

Packets per second value

burst

Burst value

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

precision milliseconds

{ { no | default } precision | precision { milliseconds | microseconds } }

Syntax Description

no

precision

milliseconds

default

Set a command to its defaults

precision

Set precision of measurement

microseconds

Precision microseconds

milliseconds

Precision milliseconds

Command Mode

- /exec/configure/ip-sla/jitter

preempt

[no] preempt | preempt

Syntax Description

no

Negate a command or set its defaults

preempt

Enable preemption of lower priority Master

Command Mode

- /exec/configure/if-eth-any/vrrpv3

preempt

[no] preempt [ delay { minimum <min-delay> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

preempt

Overthrow lower priority designated routers

delay

(Optional) Wait before preempting

minimum

(Optional) Delay atleast this long

min-delay

(Optional) Number of seconds for minimum delay

Command Mode

- /exec/configure/if-eth-any/glbp

preempt

[no] preempt

Syntax Description

no

(Optional) Negate a command or set its defaults

preempt

Enable preemption of lower priority master

Command Mode

- /exec/configure/if-eth-any/vrrp

preempt delay minimum

[no] preempt delay | preempt delay minimum <secs>

Syntax Description

no

Negate a command or set its defaults

preempt

Enable preemption of lower priority Master

delay

Wait before preempting

minimum

Delay at least this long

secs

Seconds to delay

Command Mode

- /exec/configure/if-eth-any/vrrpv3

preempt delay minimum reload sync preempt delay reload minimum sync preempt delay sync minimum reload preempt delay reload sync minimum preempt delay sync reload minimum preempt delay minimum sync reload preempt delay reload sync preempt delay sync reload preempt delay minimum sync preempt delay sync minimum preempt delay minimum reload preempt delay reload minimum preempt delay minimum preempt delay reload preempt delay sync preempt

preempt delay minimum <min-delay> reload <rel-delay> sync <sync-delay> | preempt delay reload <rel-delay> minimum <min-delay> sync <sync-delay> | preempt delay sync <sync-delay> minimum <min-delay> reload <rel-delay> | preempt delay reload <rel-delay> sync <sync-delay> minimum <min-delay> | preempt delay sync <sync-delay> reload <rel-delay> minimum <min-delay> | preempt delay minimum <min-delay> sync <sync-delay> reload <rel-delay> | preempt delay reload <rel-delay> sync <sync-delay> | preempt delay sync <sync-delay> reload <rel-delay> | preempt delay minimum <min-delay> sync <sync-delay> | preempt delay sync <sync-delay> minimum <min-delay> | preempt delay minimum <min-delay> reload <rel-delay> | preempt delay reload <rel-delay> minimum <min-delay> | preempt delay minimum <min-delay> | preempt delay reload <rel-delay> | preempt delay sync <sync-delay> | preempt | no preempt | no preempt delay [ { minimum [ <min-delay> ] [ [ reload [ <rel-delay> ] ] [ sync [ <sync-delay> ] ] | [ sync [ <sync-delay> ] ] [ reload [ <rel-delay> ] ] ] | reload [ <rel-delay> ] [ [ minimum [ <min-delay> ] ] [ sync [ <sync-delay> ] ] | [ sync [ <sync-delay> ] ] [ minimum [ <min-delay> ] ] ] | sync [ <sync-delay> ] [ [ reload [ <rel-delay> ] ] [ minimum [ <min-delay> ] ] | [ minimum [ <min-delay> ] ] [ reload [ <rel-delay> ] ] ] } ]

Syntax Description

no

Negate a command or set its defaults

preempt

Overthrow lower priority Active routers

delay

Wait before preempting

minimum

Delay at least this long

min-delay

Number of seconds for minimum delay

reload

Delay after reload

rel-delay

Number of seconds for reload delay

sync

Wait for IP redundancy clients

sync-delay

Number of seconds for sync delay

minimum

reload

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

prefix out

[ no | default ] { prefix-list <prfxlist-name> } { out | in }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

prefix-list

Apply prefix-list

prfxlist-name

Name of prefix-list

out

Apply policy to outgoing routes

in

Apply policy to incoming routes

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

priority-flow-control auto-restore multiplier

[no] priority-flow-control auto-restore multiplier { <val> }

Syntax Description

no

(Optional) Negate the command

priority-flow-control

pfc related commands

auto-restore

auto restore

multiplier

Auto restore multiplier

val

Auto multiplier value

Command Mode

- /exec/configure

priority-flow-control fixed-restore multiplier

[no] priority-flow-control fixed-restore multiplier { <val> }

Syntax Description

no

(Optional) Negate the command

priority-flow-control

pfc related commands

fixed-restore

fixed restore

multiplier

Fixed restore multiplier

val

Fixed multiplier value

Command Mode

- /exec/configure

priority-flow-control mode

[no] priority-flow-control mode { auto | on | off } [ force ]

Syntax Description

no

(Optional) Negate a command or set its defaults

priority-flow-control

Enable/Disable PFC

mode

PFC Mode

auto

Set Auto Mode

on

Force PFC to On

off

Force PFC to Off

force

(Optional) Force apply PFC config

Command Mode

- /exec/configure/if-switching /exec/configure/if-routing /exec/configure/if-port-channel /exec/configure/if-port-channel-sub

priority-flow-control override-interface mode off

[no] priority-flow-control override-interface mode off

Syntax Description

no

(Optional) Negate a command or set its defaults

priority-flow-control

Global priority-flow-control settings

override-interface

Overrides interface priority-flow-control mode

mode

Priority-flow-control mode

off

Off

Command Mode

- /exec/configure

priority-flow-control recover interface

priority-flow-control recover interface <if_list> [ qos-group <qgrp-num> ] [ module <module_idx> ] [ instance <inst> ]

Syntax Description

priority-flow-control

Change PFC settings

recover

Recover PFC queue from stuck state

interface

Interface

if_list

List of interfaces

qos-group

(Optional) No-drop class to be recovered

qgrp-num

(Optional) qos-group number of the no-drop class

module

(Optional) Slot/module

module_idx

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

inst

(Optional) ASIC Instance Number in Decimal

Command Mode

- /exec

priority-flow-control watch-dog-interval on

[no] priority-flow-control watch-dog-interval { on | off }

Syntax Description

no

(Optional) Negate the command

priority-flow-control

Enable/Disable PFC

watch-dog-interval

Watch dog interval

on

Enable PFC watch-dog interval globally

off

Disable PFC watch-dog interval globally

Command Mode

- /exec/configure

priority-flow-control watch-dog-interval on

[no] priority-flow-control watch-dog-interval { on | off }

Syntax Description

no

(Optional) Negate a command or set its defaults

priority-flow-control

Enable/Disable PFC

watch-dog-interval

Watch dog interval

on

PFC watch-dog interval to On

off

PFC watch-dog interval to Off

Command Mode

- /exec/configure/if-switching /exec/configure/if-routing /exec/configure/if-port-channel /exec/configure/if-port-channel-sub

priority-flow-control watch-dog interval

[no] priority-flow-control watch-dog interval <interval-val>

Syntax Description

no

(Optional) Negate the command

priority-flow-control

pfc related commands

watch-dog

watch dog interval

interval

Poll interval

interval-val

Watch dog interval value in ms

Command Mode

- /exec/configure

priority-flow-control watch-dog shutdown-multiplier

[no] priority-flow-control watch-dog shutdown-multiplier { <val> }

Syntax Description

no

(Optional) Negate the command

priority-flow-control

pfc related commands

watch-dog

watch dog interval

shutdown-multiplier

Shutdown multiplier

val

Shutdown multiplier

Command Mode

- /exec/configure

priority

priority <priority> [ forwarding-threshold lower <lower-value> upper <upper-value> ] | no priority [ forwarding-threshold ]

Syntax Description

no

Negate a command or set its defaults

priority

Priority level

priority

Priority value

forwarding-threshold

(Optional) Set forwarding threshold

lower

(Optional) Set lower threshold value

lower-value

(Optional) Lower threshold value

upper

(Optional) Set upper threshold value

upper-value

(Optional) Upper threshold value

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

priority2

[no] priority2 [ level2 <value> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

priority2

Configure traffic class priority

level2

(Optional) Specify level of priority

value

(Optional) Strict-priority level (1=hi 2=med 3=lo)

Command Mode

- /exec/configure/policy-map/type/queuing/class

priority

{ priority <pri-value> } | { no priority }

Syntax Description

no

Negate a command or set its defaults

priority

Priority level

pri-value

Priority Value

Command Mode

- /exec/configure/if-eth-any/glbp

priority

[no] priority [ level <value> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

priority

Configure traffic class priority

level

(Optional) Specify level of priority

value

(Optional) Value of level, lower the number higher the priority

Command Mode

- /exec/configure/policy-map/type/queuing/class

priority

[no] priority | priority <setup_prio> [ <hold_prio> ]

Syntax Description

no

Negate a command or set its defaults

priority

Specify LSP priority

setup_prio

setup priority

hold_prio

(Optional) hold priority

Command Mode

- /exec/configure/te/lsp-attr

priority

[no] priority | priority <setup_pri> [ <hold_pri> ]

Syntax Description

no

Negate a command or set its defaults

priority

tunnel priority

setup_pri

setup priority

hold_pri

(Optional) hold priority

Command Mode

- /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

priority

priority <value> | no priority

Syntax Description

no

Negate a command or set its defaults

priority

Configure Bundle priority

value

Priority value

Command Mode

- /exec/configure/anycast

priority

{ priority <priority_value> [ forwarding-threshold lower <lower-value> upper <upper-value> ] | no priority [ forwarding-threshold ] }

Syntax Description

no

Negate a command or set its defaults

priority

Configure the vr priority

priority_value

Configure the vr priority

forwarding-threshold

(Optional) Set forwarding threshold

lower

(Optional) Set lower threshold value

lower-value

(Optional) Lower threshold value

upper

(Optional) Set upper threshold value

upper-value

(Optional) Upper threshold value

Command Mode

- /exec/configure/if-eth-any/vrrp

priority

[no] priority | priority <val>

Syntax Description

no

Negate a command or set its defaults

priority

Priority of this VRRP group

val

Priority level

Command Mode

- /exec/configure/if-eth-any/vrrpv3

private-vlan

[no] private-vlan <pvlan-type>

Syntax Description

no

(Optional) Negate a command or set its defaults

private-vlan

Configure a private VLAN

pvlan-type

PVLAN Type

Command Mode

- /exec/configure/vlan

private-vlan association

{ private-vlan association [ { add | remove } ] <secondary_vlans> } | { no private-vlan association [ <secondary_vlans> ] }

Syntax Description

private-vlan

Configure a private VLAN

association

Add association between private VLANs

add

(Optional) Add a VLAN to private VLAN list

remove

(Optional) Remove a VLAN from private VLAN list

no

Negate a command or set its defaults

secondary_vlans

VLAN IDs of the private VLANs to be configured

Command Mode

- /exec/configure/vlan

private-vlan mapping

{ private-vlan mapping [ { add | remove } ] <secondary_vlans> } | { no private-vlan mapping [ <secondary_vlans> ] }

Syntax Description

private-vlan

Configure a private VLAN

mapping

Set the private VLAN interface mapping

add

(Optional) Add a VLAN to private VLAN list

remove

(Optional) Remove a VLAN from private VLAN list

no

Negate a command or set its defaults

secondary_vlans

Secondary VLAN IDs of the private VLAN interface mapping

Command Mode

- /exec/configure/if-vlan

private-vlan release resource

private-vlan release resource { [ vlan <vlan-id> ] | global }

Syntax Description

private-vlan

Show information about private VLAN

release

release

resource

resource

vlan

(Optional) VLAN status

global

global rid

vlan-id

(Optional) VLAN IDs of the private VLANs to be configured

Command Mode

- /exec

private-vlan synchronize

private-vlan synchronize

Syntax Description

private-vlan

Set private-vlan synchronization

synchronize

Synchronize vlans

Command Mode

- /exec/configure/spanning-tree/mst/configuration

probe

[no] probe <probe-id-icmp> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-icmp

Service mode

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe

[no] probe <probe-id-icmp> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-icmp

Service mode

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-dg-node

probe

[no] probe <probe-id-icmp> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-icmp

Service mode

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node-standby

probe

[no] probe <probe-id-icmp> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-icmp

Service mode

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

probe

[no] probe <probe-id-icmp> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-icmp

Service mode

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node-standby

probe

[no] probe <probe-id-icmp> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-icmp

Service mode

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

probe get

[no] probe <probe-id-http> get [ <url-name> | cache | frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-http

Service mode

get

Host name/Target address

url-name

(Optional) Specify only the user input text/filename. http://<node-ip>/<user input>

cache

(Optional) Use cache

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

probe get

[no] probe <probe-id-http> get [ <url-name> | cache | frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-http

Service mode

get

Host name/Target address

url-name

(Optional) Specify only the user input text/filename. http://<node-ip>/<user input>

cache

(Optional) Use cache

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe get

[no] probe <probe-id-http> get [ <url-name> | cache | frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-http

Service mode

get

Host name/Target address

url-name

(Optional) Specify only the user input text/filename. http://<node-ip>/<user input>

cache

(Optional) Use cache

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node-standby

probe get

[no] probe <probe-id-http> get <url-name> [ cache | frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-http

Service mode

get

Host name/Target address

url-name

Specify only the user input text/filename. http://<node-ip>/<user input>

cache

(Optional) Use cache

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe get

[no] probe <probe-id-http> get <url-name> [ cache | frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-http

Service mode

get

Host name/Target address

url-name

Specify only the user input text/filename. http://<node-ip>/<user input>

cache

(Optional) Use cache

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe get

[no] probe <probe-id-http> get <url-name> [ cache | frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-http

Service mode

get

Host name/Target address

url-name

Specify only the user input text/filename. http://<node-ip>/<user input>

cache

(Optional) Use cache

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

probe host

[no] probe <probe-id-dns> host <host-name> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-dns

Service mode

host

Host name/Target address

host-name

DNS Target IP Address or Hostname

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe host

[no] probe <probe-id-dns> host <host-name> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-dns

Service mode

host

Host name/Target address

host-name

DNS Target IP Address or Hostname

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe host

[no] probe <probe-id-dns> host <host-name> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-dns

Service mode

host

Host name/Target address

host-name

DNS Target IP Address or Hostname

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node-standby

probe host

[no] probe <probe-id-dns> host <host-name> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-dns

Service mode

host

Host name/Target address

host-name

DNS Target IP Address or Hostname

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

probe host

[no] probe <probe-id-dns> host <host-name> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-dns

Service mode

host

Host name/Target address

host-name

DNS Target IP Address or Hostname

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node-standby

probe host

[no] probe <probe-id-dns> host <host-name> [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id-dns

Service mode

host

Host name/Target address

host-name

DNS Target IP Address or Hostname

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

probe port

[no] probe <probe-id> port <port-num> [ control <status> ] [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id

Service mode

port

Port

port-num

Port number

control

(Optional) control protocol

status

(Optional) control protocol status

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

probe port

[no] probe <probe-id> port <port-num> [ control <status> ] [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id

Service mode

port

Port

port-num

Port number

control

(Optional) control protocol

status

(Optional) control protocol status

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe port

[no] probe <probe-id> port <port-num> [ control <status> ] [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id

Service mode

port

Port

port-num

Port number

control

(Optional) control protocol

status

(Optional) control protocol status

frequency

(Optional) Frequency

freq-num

(Optional) Frequency

timeout

(Optional) Timeout

timeout

(Optional) Timeout

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node-standby

probe port

[no] probe <probe-id> port <port-num> [ control <status> ] [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id

Service mode

port

Port

port-num

Port number

control

(Optional) control protocol

status

(Optional) control protocol status

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node

probe port

[no] probe <probe-id> port <port-num> [ control <status> ] [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> | ip <ip-addr> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id

Service mode

port

Port

port-num

Port number

control

(Optional) control protocol

status

(Optional) control protocol status

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

ip

(Optional) ip address for probe

ip-addr

(Optional) IP4 prefix in format i.i.i.i

Command Mode

- /exec/configure/itd-dg-node-standby

probe port

[no] probe <probe-id> port <port-num> [ control <status> ] [ frequency <freq-num> | timeout <timeout> | retry-down-count <count> | retry-up-count <up-count> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

probe

ITD probe

probe-id

Service mode

port

Port

port-num

Port number

control

(Optional) control protocol

status

(Optional) control protocol status

frequency

(Optional) Frequency in seconds

freq-num

(Optional) Frequency in seconds

timeout

(Optional) Timeout in seconds

timeout

(Optional) Timeout in seconds

retry-down-count

(Optional) Retry-count when node goes down

count

(Optional) Count

retry-up-count

(Optional) Retry-count when node comes back up

up-count

(Optional) Count

Command Mode

- /exec/configure/itd-device-group

promiscuous-mode off

promiscuous-mode { off | on } | no promiscuous-mode [ { off | on } ]

Syntax Description

no

Negate a command or set its defaults

promiscuous-mode

Configure promiscuous mode for the port

off

Disable promiscuous mode

on

Enable promiscuous mode

Command Mode

- /exec/configure/if-port-channel /exec/configure/if-ethernet-all /exec/configure/if-eth-base

propagate-sgt

[no] propagate-sgt

Syntax Description

propagate-sgt

Enable SGT propagation from this port (the default use the no form to disable)

Command Mode

- /exec/configure/cts-dot1x /exec/configure/cts-manual

protection

[no] protection | protection [ fast-reroute [ bw-protect ] ]

Syntax Description

no

Negate a command or set its defaults

protection

Enable failure protection

fast-reroute

(Optional) Enable fast-reroute failure protection

bw-protect

(Optional) Enable BW protection

Command Mode

- /exec/configure/te/lsp-attr

protocol

{ protocol <num> } | { no protocol }

Syntax Description

no

Negate a command or set its defaults

protocol

specify flow protocol number

num

flow protocol number

Command Mode

- /exec/configure/configngoamprofileflow

protocol shutdown

[no] protocol shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

protocol

OSPF protocol

shutdown

Shutdown the OSPF protocol instance

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

protocol shutdown

[no] protocol shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

protocol

OSPF protocol

shutdown

shutdown the OSPF protocol instance

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

ptp

[no] ptp

Syntax Description

no

(Optional) Negate a command or set its defaults

ptp

Precision Time Protocol (IEEE 1588) Subsystem

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp announce interval

[no] ptp announce interval { <log-seconds> | smpte-2059-2 <smpte-log-seconds> | aes67 <aes-log-seconds> }

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

announce

announce

interval

interval

log-seconds

log seconds

smpte-2059-2

SMPTE-2059-2

smpte-log-seconds

SMPTE-2059-2 log seconds

aes67

AES67-2015

aes-log-seconds

AES67-2015 log seconds

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp announce timeout

[no] ptp announce timeout { <val> | smpte-2059-2 <smpte-val> | aes67 <aes-val> }

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

announce

announce

timeout

timeout

smpte-2059-2

SMPTE-2059-2

aes67

AES67-2015

val

val

smpte-val

SMPTE-2059-2 val

aes-val

AES67-2015 val

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp clock one-step

[no] ptp { clock-mode | clock-operation } one-step

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

clock-mode

Set the PTP Clock mode

clock-operation

Set the PTP Clock Operation

one-step

One step

Command Mode

- /exec/configure

ptp delay-request minimum interval

[no] ptp delay-request minimum interval { <log-seconds> | smpte-2059-2 <smpte-log-seconds> | aes67 <aes-log-seconds> }

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

delay-request

delay-request

minimum

minimum

interval

interval

smpte-2059-2

SMPTE-2059-2

aes67

AES67-2015

log-seconds

log seconds

smpte-log-seconds

SMPTE-2059-2 log seconds

aes-log-seconds

AES67-2015 log seconds

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp domain

[no] ptp domain <domain-val>

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

domain

ptp clock domain

domain-val

Enter domain value

Command Mode

- /exec/configure

ptp multicast master-only

[no] ptp multicast master-only

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

multicast

multicast

master-only

master only

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp offload

[no] ptp offload

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

offload

Allows increasing number of PTP sessions per system by offloading some timers to linecard

Command Mode

- /exec/configure

ptp priority1

[no] ptp priority1 <val>

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

priority1

priority1

val

priority1

Command Mode

- /exec/configure

ptp priority2

[no] ptp priority2 <val>

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

priority2

priority1

val

priority2

Command Mode

- /exec/configure

ptp source

[no] ptp source <src-ip> [ vrf { <vrf-name> | <vrf-cfg-name> } ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

source

source IP address

src-ip

IPv4 address (A.B.C.D) of source

vrf

(Optional) vrf to be used for hello messages

vrf-name

(Optional) vrf to be used for hellos

vrf-cfg-name

(Optional) Configurable VRF name

Command Mode

- /exec/configure

ptp sync interval

[no] ptp sync interval { <log-seconds> | smpte-2059-2 <smpte-log-seconds> | aes67 <aes-log-seconds> }

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

sync

sync

interval

interval

smpte-2059-2

SMPTE-2059-2

aes67

AES67-2015

log-seconds

log seconds

smpte-log-seconds

SMPTE-2059-2 log seconds

aes-log-seconds

AES67-2015 log seconds

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp time-sync

[no] ptp time-sync <value>

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

time-sync

ptp time sync register

value

default reg value 0x40000000

Command Mode

- /exec/configure

ptp transport ipv4 ucast master

[no] ptp transport ipv4 ucast master

Syntax Description

no

(Optional) Negate a command or set its defaults

ptp

Precision Time Protocol (IEEE 1588) Subsystem

transport

unicast support

ipv4

ipv4

ucast

ipv4 unicast

master

master mode

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp transport ipv4 ucast slave

[no] ptp transport ipv4 ucast slave

Syntax Description

no

(Optional) Negate a command or set its defaults

ptp

Precision Time Protocol (IEEE 1588) Subsystem

transport

unicast support

ipv4

ipv4

ucast

ipv4 unicast

slave

slave mode

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp ucast-source

[no] ptp ucast-source <src-ip> [ vrf { <vrf-name> | <vrf-cfg-name> } ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

ucast-source

source IP address for unicast messages

src-ip

IPv4 address (A.B.C.D) of source

vrf

(Optional) vrf to be used for hello messages

vrf-name

(Optional) vrf to be used for hellos

vrf-cfg-name

(Optional) Configurable VRF name

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ptp vlan

[no] ptp vlan <vlan>

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

vlan

vlan

vlan

vlan

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

publish-event sub-system type

publish-event sub-system <sub-system-id> type <event-type> { [ arg1 <data1> ] [ arg2 <data2> ] [ arg3 <data3> ] [ arg4 <data4> ] }

Syntax Description

publish-event

Publish an application specific event

sub-system

Sub-system ID to which the application event belongs

sub-system-id

Sub-system ID value

type

Event type value

event-type

Event type value

arg1

(Optional) User specified data to be passed when the event is published

data1

(Optional) User specified data value

arg2

(Optional) User specified data to be passed when the event is published

data2

(Optional) User specified data value

arg3

(Optional) User specified data to be passed when the event is published

data3

(Optional) User specified data value

arg4

(Optional) User specified data to be passed when the event is published

data4

(Optional) User specified data value

Command Mode

- /exec

pulse

pulse { enable | disable | destroy | reset } { all | sup sap <sapno> }

Syntax Description

pulse

Pulse Utility Configurations

enable

Enable MTS Message Profiling

disable

Disable MTS Message Profiling

reset

Reset Pulse Database

destroy

Destroy Pulse Database

all

All Subscribers

sup

Supervisor Application

sap

Staic MTS SAP

sapno

MTS SAP Number of an Application

Command Mode

- /exec

pulse

pulse { enable remote-logging <ip-addr> id <id> [ tag <tag> ] | disable remote-logging } { all | sup sap <sapno> }

Syntax Description

pulse

Pulse Utility Configurations

enable

Enable MTS Message Profiling

disable

Disable MTS Message Profiling

remote-logging

Enable Remote Logging of Logs

id

Specify Log Directory

tag

(Optional) Attach Unique Identifier with Log Files

all

All Subscribers

sup

Supervisor Application

sap

Staic MTS SAP

sapno

MTS SAP Number of an Application

id

Create Log Directory to Save All LogFiles

tag

(Optional) Append Unique Identifier to the Remote Logfile

ip-addr

IP Address of Remote Logging Server Reachable via OOB Management Interface

Command Mode

- /exec

pulse remove local

pulse remove { local-files | remote-files }

Syntax Description

pulse

Pulse Utility Configurations

remove

Remove Logged Files

local-files

Remove Logged Files within Switch

remote-files

Remove Logged Files on remote-server

Command Mode

- /exec

purge ip route

purge ip route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

purge

Purge

ip

IPv4

route

Purge routing information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Purge all routes

Command Mode

- /exec

purge ipv6 route

purge ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

purge

Purge

ipv6

IPv6

route

Purge routing information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Purge all routes

Command Mode

- /exec

purge module running-config

purge module <module> running-config

Syntax Description

purge

Deletes unused data

module

Purge configuration for non-existent modules

module

Enter module number

running-config

purge running configuration for non-existent modules

Command Mode

- /exec

push

push [ <name> ]

Syntax Description

push

push current mode to stack or save it under name

name

(Optional) name

Command Mode

- /global

pwd

pwd

Syntax Description

pwd

View current directory

Command Mode

- /exec

python

python [ <uri> [ <pyargs> ] + ]

Syntax Description

python

run a python command/script, or enter python mode (if no arg)

uri

(Optional) path to a python file

pyargs

(Optional) python command line arguments (maximum 32)

Command Mode

- /exec

python execute virtual-service command

python execute virtual-service <service> command [ <pyargs> ] +

Syntax Description

python

run a python command/script, or enter python mode (if no arg)

execute

execute a virtual service command

virtual-service

virtual service to execute the command

command

command to execute

service

name of existing virtual service

pyargs

(Optional) command and args (maximum 32)

Command Mode

- /exec

python instance

[no] python instance <inst> [ <uri> [ <pyargs> ] + ] | python instance <inst> <uri> [ <pyargs> ] +

Syntax Description

no

Negate a command or set its defaults

python

run a python command/script, or enter python mode (if no arg)

instance

label with an instance number

inst

instance number

uri

(Optional) path to a python file

pyargs

(Optional) python command line arguments (maximum 32)

Command Mode

- /exec/configure

Chapter 18. Q Commands

- qos copy policy-map type network-qos prefix

- qos copy policy-map type queuing prefix

- qos qos-policies statistics

- qos shared-policer

- qos statistics

- qualify udf

- queue-limit

- queue-limit2

- queue-limit3

qos copy policy-map type network-qos prefix

qos copy policy-map type network-qos <pmap-nq-enum-name-dc3> { prefix | suffix } <ix-name>

Syntax Description

copy

Copy (Clone) template

policy-map

Configure a policy map

type

Specify the type of this policy-map

network-qos

Network QoS policy

pmap-nq-enum-name-dc3

prefix

Policy map name prefix

suffix

Policy map name suffix

ix-name

Suffix/Prefix name, max size counted together with policy name

Command Mode

- /exec

qos copy policy-map type queuing prefix

qos copy policy-map type queuing <pmap-name-que-temp> { prefix | suffix } <ix-name>

Syntax Description

copy

Copy (Clone) template

policy-map

Configure a policy map

type

Specify the type of this policy-map

queuing

Queuing policy

pmap-name-que-temp

Policy-map name

prefix

Policy map name prefix

suffix

Policy map name suffix

ix-name

Suffix/Prefix name, max size counted together with policy name

Command Mode

- /exec

qos qos-policies statistics

[no] qos qos-policies statistics

Syntax Description

no

(Optional) Negate a command or set its defaults

qos-policies

All qos type policies

statistics

statistics

Command Mode

- /exec/configure

qos shared-policer

{ qos shared-policer [ type qos ] <policer-name> { [ cir ] { <cir-val> [ bps | kbps | mbps | gbps | pps ] | percent <cir-perc> } [ [ bc ] { <committed-burst> [ bytes | kbytes | mbytes | ms | us | packets ] } ] [ pir { <pir-val> [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent <pir-perc> } [ [ be ] { <extended-burst> [ bytes2 | kbytes2 | mbytes2 | ms2 | us2 | packets2 ] } ] ] [ conform { transmit | set-prec-transmit { <prec-val> | <prec-enum> } | set-dscp-transmit { <dscp-val> | <dscp-enum> } | set-cos-transmit <cos-val> | set-discard-class-transmit <disc-class-val> | set-qos-transmit <qos-grp-val> | set-mpls-exp-imposition-transmit <exp-value-imp> | set-mpls-exp-topmost-transmit <exp-value-top> } ] [ exceed { transmit1 | drop1 | set <exc-frm-field> <exc-to-field> table cir-markdown-map | set-prec-transmit1 { <prec-val1> | <prec-enum1> } | set-dscp-transmit1 { <dscp-val1> | <dscp-enum1> } | set-cos-transmit1 <cos-val1> | set-discard-class-transmit1 <disc-class-val1> | set-qos-transmit1 <qos-grp-val1> | set-mpls-exp-imposition-transmit1 <exp-value-imp1> | set-mpls-exp-topmost-transmit1 <exp-value-top1> } ] [ violate { drop2 | set <vio-frm-field> <vio-to-field> table2 pir-markdown-map | set-prec-transmit2 { <prec-val2> | <prec-enum2> } | set-dscp-transmit2 { <dscp-val2> | <dscp-enum2> } | set-cos-transmit2 <cos-val2> | set-discard-class-transmit2 <disc-class-val2> | set-qos-transmit2 <qos-grp-val2> | set-mpls-exp-imposition-transmit2 <exp-value-imp2> | set-mpls-exp-topmost-transmit2 <exp-value-top2> } ] } | no qos shared-policer [ type qos ] <policer-name> }

Syntax Description

no

Negate a command or set its defaults

shared-policer

Shared policer

policer-name

Shared policer name

type

(Optional) Specify the type of shared-policer

qos

QoS Global Commands

cir

(Optional) Specify committed information rate

bc

(Optional) Specify committed burst

percent

Specify rate as percentage of interface data-rate

cir-perc

Percentage

pir-perc

(Optional) Percentage

pir

(Optional) Specify peak information rate

be

(Optional) Specify extended burst (for 1R3C meter)

bps

(Optional) Bits per second

kbps

(Optional) Kilo bits per second

mbps

(Optional) Mega bits per second

gbps

(Optional) Giga bits per second

pps

(Optional) Packets per second

bps2

(Optional) Bits per second

kbps2

(Optional) Kilo Bits per second

mbps2

(Optional) Mega Bits per second

gbps2

(Optional) Giga Bits per second

pps2

(Optional) Packets per second

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

us

(Optional) Micro second(s)

ms

(Optional) Milli second(s)

packets

(Optional) Packets

bytes2

(Optional) Bytes

kbytes2

(Optional) Kilo Bytes

mbytes2

(Optional) Mega Bytes

ms2

(Optional) Milli seconds

us2

(Optional) Micro seconds

packets2

(Optional) Packets

conform

(Optional) Specify a conform action

exceed

(Optional) Specify a exceed action

violate

(Optional) Specify a violate action

transmit

(Optional) Transmit packet

transmit1

(Optional) Transmit packet

drop1

(Optional) Drop packet

drop2

(Optional) Drop packet

set-prec-transmit

(Optional) Set precedence and send it

set-prec-transmit1

(Optional) Set precedence and send it

set-prec-transmit2

(Optional) Set precedence and send it

prec-val

(Optional) Precedence value

prec-val1

(Optional) Precedence value

prec-val2

(Optional) Precedence value

prec-enum

(Optional)

prec-enum1

(Optional)

prec-enum2

(Optional)

set-dscp-transmit

(Optional) Set dscp and send it

set-dscp-transmit1

(Optional) Set dscp and send it

set-dscp-transmit2

(Optional) Set dscp and send it

dscp-val

(Optional) DSCP value

dscp-val1

(Optional) DSCP value

dscp-val2

(Optional) DSCP value

dscp-enum

(Optional)

dscp-enum1

(Optional)

dscp-enum2

(Optional)

set-cos-transmit

(Optional) Set cos and send it

set-cos-transmit1

(Optional) Set cos and send it

set-cos-transmit2

(Optional) Set cos and send it

cos-val

(Optional) new cos value

cos-val1

(Optional) new cos value

cos-val2

(Optional) new cos value

set-discard-class-transmit

(Optional) Set discard class and send it

set-discard-class-transmit1

(Optional) Set discard class and send it

set-discard-class-transmit2

(Optional) Set discard class and send it

disc-class-val

(Optional) new discard-class value

disc-class-val1

(Optional) new discard-class value

disc-class-val2

(Optional) new discard-class value

set-qos-transmit

(Optional) Set qos-group and send it

set-qos-transmit1

(Optional) Set qos-group and send it

set-qos-transmit2

(Optional) Set qos-group and send it

qos-grp-val

(Optional) QoS group value

qos-grp-val1

(Optional) QoS group value

qos-grp-val2

(Optional) QoS group value

set-mpls-exp-imposition-transmit

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit1

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit2

(Optional) set-mpls-exp-imposition-transmit

exp-value-imp

(Optional) MPLS imposition value

exp-value-imp1

(Optional) MPLS imposition value

exp-value-imp2

(Optional) MPLS imposition value

set-mpls-exp-topmost-transmit

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit1

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit2

(Optional) Set MPLS topmost label

exp-value-top

(Optional) MPLS topmost value

exp-value-top1

(Optional) MPLS topmost value

exp-value-top2

(Optional) MPLS topmost value

set

(Optional) Set a particular value using table or markdown map

exc-frm-field

(Optional)

exc-to-field

(Optional)

vio-frm-field

(Optional)

vio-to-field

(Optional)

table

(Optional) Set using the table-map

table2

(Optional) Set using the table-map

cir-markdown-map

(Optional) Markdown map table name for exceed action

pir-markdown-map

(Optional) Markdown map table name for violate action

Command Mode

- /exec/configure

qos statistics

[no] qos statistics

Syntax Description

no

(Optional) Negate a command or set its defaults

statistics

statistics

Command Mode

- /exec/configure

qualify udf

[no] <udf_tcam_type> qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate a command or set its defaults

udf_tcam_type

Region type

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

- /exec/configure/tcam-templ

queue-limit

[no] queue-limit [ cos <cos-val> ] { <q-size> [ packets | bytes | kbytes | mbytes | ms | us ] | percent <perc-q-size> | dynamic <alpha> }

Syntax Description

no

(Optional) Negate a command or set its defaults

queue-limit

Configure queue size for the class

cos

(Optional) IEEE 802.1Q Class of Service

cos-val

(Optional) 802.1Q Class of Service value

percent

Specify queue size in Percentage

perc-q-size

Queue size in percentage of total tx/rx buffer size

dynamic

Queue size in dynamic alpha factor

alpha

0-1/128, 1-1/64, 2-1/32, 3-1/16, 4-1/8, 5-1/4, 6-1/2, 7-1, 8-2, 9-4, 10-8

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)

Command Mode

- /exec/configure/policy-map/type/queuing/class

queue-limit2

[no] queue-limit2 [ cos2 <cos-val> ] { <q-size> [ packets | bytes | kbytes | mbytes | ms | us ] | percent2 <perc-q-size> | dynamic2 <alpha> }

Syntax Description

no

(Optional) Negate a command or set its defaults

queue-limit2

Configure queue size for the class

cos2

(Optional) IEEE 802.1Q Class of Service

cos-val

(Optional) 802.1Q Class of Service value

percent2

Specify queue size in Percentage

perc-q-size

Queue size in percentage of total tx/rx buffer size

dynamic2

Queue size in dynamic alpha factor

alpha

0-1/128, 1-1/64, 2-1/32, 3-1/16, 4-1/8, 5-1/4, 6-1/2, 7-1, 8-2, 9-4, 10-8

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)

Command Mode

- /exec/configure/policy-map/type/queuing/class

queue-limit3

[no] queue-limit3 [ cos3 <cos-val> ] { <q-size> [ packets | bytes | kbytes | mbytes | ms | us ] | percent3 <perc-q-size> | dynamic3 <alpha> }

Syntax Description

no

(Optional) Negate a command or set its defaults

queue-limit3

Configure queue size for the class

cos3

(Optional) IEEE 802.1Q Class of Service

cos-val

(Optional) 802.1Q Class of Service value

percent3

Specify queue size in Percentage

perc-q-size

Queue size in percentage of total tx/rx buffer size

dynamic3

Queue size in dynamic alpha factor

alpha

0-1/8, 1-1/4, 2-1/2, 3-3/4, 4-9/8, 5-15/8, 6-3, 7-5, 8-8, 9-14, 10-18

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)

Command Mode

- /exec/configure/policy-map/type/queuing/class

Chapter 19. R Commands

- radius-server deadtime

- radius-server directed-request

- radius-server host key 0 6 7

- radius-server host test

- radius-server key 0 6 7

- radius-server pss-clean

- radius-server retransmit

- radius-server test

- radius-server timeout

- random-detect

- random-detect2 minimum-threshold2 maximum-threshold2

- random-detect2 non-ecn minimum-threshold2 maximum-threshold2 drop

- random-detect

- random-detect cos-based

- rate-limit

- rate-limit cpu direction pps action log

- rate-limit cpu direction pps action log

- rate-mode

- rd auto

- rd auto

- reconnect-interval

- record-route

- record-route

- record

- record netflow-original

- record netflow

- record netflow

- record netflow

- record netflow protocol-port

- redistribute bgp

- redistribute bgp eigrp isis ospf rip static direct amt lisp route-map

- redistribute filter route-map

- redistribute filter route-map

- redistribute maximum-prefix

- redistribute maximum-prefix

- redistribute maximum-prefix

- redistribute maximum-prefix

- redistribute maximum-prefix

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redistribute route-map

- redownload forwarding state

- redundancy-group

- reference-bandwidth

- reference-bandwidth

- refresh profile-diff

- refresh profile

- register-database-mapping

- register-route-notifications

- reload

- reload ascii

- reload fex

- reload force

- reload kexec

- reload kexec

- reload module

- reload module force-dnld

- reload module hard

- reload non-interruptive

- reload power-cycle

- reload restore

- reload sync-adjacency

- reload sync-adjacency

- reload vdc

- reload vdc

- remark

- remark

- remark

- remote-as

- remote-span

- remote

- remove-private-as

- remove-routes vni

- remove cli commands

- reoptimize events link-up

- replay-protection

- replication-server

- report

- report

- report

- report

- report

- report

- report

- request-data-size

- request-data-size

- request-data-size

- resequence access

- reset

- reset

- reset

- reset

- reset

- reset

- reset

- restart amt

- restart bgp

- restart eigrp

- restart fabricpath domain

- restart igmp

- restart isis

- restart l3vm

- restart lisp

- restart msdp

- restart orib

- restart ospf

- restart ospfv3

- restart otv-isis

- restart otv

- restart pim

- restart pim6

- restart rip

- restart rpm

- restart rsvp

- resync-database

- retain route-target all

- retain route-target all

- retransmit-interval

- retransmit-interval

- retransmit-interval

- revision

- revocation-check crl

- rewrite-evpn-rt-asn

- rfc1583compatibility

- rip shutdown

- rmdir

- rmon alarm absolute rising-threshold falling-threshold

- rmon event

- rmon hcalarm absolute startupalarm rising-threshold falling-threshold owner

- roaming-eid-prefix

- role feature-group name

- role name

- role priority

- rollback progress stats

- rollback running-config checkpoint

- root-priority

- route-map

- route-map

- route-map

- route-map

- route-map out

- route-map pbr-statistics

- route-reflector-client

- route-reflector-client

- route-target both auto

- route-target both auto

- route-target export

- route-target export auto

- route-target import

- route-target import auto

- route delete dampen interval

- router-guard ip multicast

- router-guard ip multicast switchports

- router-id

- router-id

- router-id

- router-id

- router-id

- router bgp

- router eigrp

- router isis

- router ospf

- router ospfv3

- router rip

- routing-context vrf

- routing ipv4 unicast nexthop-sorting

- routing ipv6 unicast nexthop-sorting

- rsakeypair

- rtr etr eid

- rule

- rule command

- rule oid

- run-script

- run-show-tech-script

- run2 guestshell

- run bash

radius-server deadtime

[no] radius-server deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes

Command Mode

- /exec/configure

radius-server directed-request

[no] radius-server directed-request

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

directed-request

enable direct authentication requests to server

Command Mode

- /exec/configure

radius-server host key 0 6 7

{ { [ no ] radius-server host <hostipname> { { key { 0 <s0> | 6 <s6> | 7 <s1> | <s2> } [ pac ] [ auth-port <i0> [ acct-port <i1> ] ] } | { [ auth-port1 <i2> ] [ acct-port1 <i3> ] } } [ { authentication [ accounting [ timeout <i4> ] [ retransmit <i5> ] ] } | { [ accounting1 ] [ timeout1 <i6> ] [ retransmit1 <i7> ] } ] } | { no radius-server host <hostipname> key } }

Syntax Description

key

0

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

host

RADIUS server's DNS name or its IP address

hostipname

IPV4/IPV6 address or DNS name

key

RADIUS shared secret

pac

(Optional) Secure Radius Enable

0

RADIUS shared secret(clear text)

s0

RADIUS shared secret(clear text)

accounting

(Optional) Use for accounting

retransmit

(Optional) RADIUS server retransmit count

i5

(Optional) RADIUS server retransmit count

timeout

(Optional) RADIUS server timeout period in seconds

i4

(Optional) RADIUS server timeout period in seconds

retransmit1

(Optional) RADIUS server retransmit count

i7

(Optional) RADIUS server retransmit count

auth-port

(Optional) RADIUS server's port for authentication

i0

(Optional) port number

timeout1

(Optional) RADIUS server timeout period in seconds

i6

(Optional) RADIUS server timeout period in seconds

acct-port

(Optional) RADIUS server's port for accounting

i1

(Optional) port number

accounting1

(Optional) Use for accounting

authentication

(Optional) Use for authentication

6

Radius shared secret(type-6 encrypted)

s6

Tadius shared secret(encrypted)

7

RADIUS shared secret(encrypted)

s1

RADIUS shared secret(encrypted)

auth-port1

(Optional) RADIUS server's port for authentication

i2

(Optional) port number

s2

RADIUS shared secret(clear text)

acct-port1

(Optional) RADIUS server's port for accounting

i3

(Optional) port number

Command Mode

- /exec/configure

radius-server host test

[no] radius-server host { <hostipname> } test { { username <s0> { [ password <s1> [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password <s1> [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

host

RADIUS server's DNS name or its IP address

hostipname

IPV4/IPV6 address or DNS name

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

- /exec/configure

radius-server key 0 6 7

{ { [ no ] radius-server key { 0 <s0> | 6 <s6> | 7 <s1> | <s2> } } | { no radius-server key } }

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

key

Global RADIUS server shared secret

0

default RADIUS shared secret(clear text)

s0

default RADIUS shared secret(clear text)

6

default RADIUS shared secret(type-6 encrypted)

s6

default RADIUS shared secret(type-6 encrypted)

7

default RADIUS shared secret(encrypted)

s1

default RADIUS shared secret(encrypted)

s2

default RADIUS shared secret(clear text)

Command Mode

- /exec/configure

radius-server pss-clean

[no] radius-server pss-clean

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

pss-clean

Erase PSS

Command Mode

- /exec/configure

radius-server retransmit

[no] radius-server retransmit <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

retransmit

Global RADIUS server retransmit count

i0

Global RADIUS server retransmit count

Command Mode

- /exec/configure

radius-server test

[no] radius-server test { { username <s0> { [ password <s1> [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password <s1> [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

- /exec/configure

radius-server timeout

[no] radius-server timeout <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

timeout

Global RADIUS server timeout period in seconds

i0

RADIUS server timeout period in seconds

Command Mode

- /exec/configure

random-detect

[no] random-detect { cos <cos-list> [ minimum-threshold ] { <min-thresh> [ packets | bytes | kbytes | mbytes | ms | us ] | percent <min-percent-of-qsize> } [ maximum-threshold ] { <max-thresh> [ packets1 | bytes1 | kbytes1 | mbytes1 | ms1 | us1 ] | percent1 <max-percent-of-qsize> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

random-detect

Configure WRED parameters

cos

Parameters for each cos value

cos-list

List of class-of-service values

minimum-threshold

(Optional) Specify minimum threshold for WRED

maximum-threshold

(Optional) Specify maximum threshold for WRED

max-thresh

Maximum threshold value

percent

Specify thresholds in percent

percent1

Specify thresholds in percent

min-percent-of-qsize

Minimum threshold percent of queue size

max-percent-of-qsize

Maximum threshold percent of queue size

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)

packets1

(Optional) Packets

bytes1

(Optional) Bytes

kbytes1

(Optional) Kilo Bytes

mbytes1

(Optional) Mega Bytes

ms1

(Optional) Milli second(s)

us1

(Optional) Micro second(s)

Command Mode

- /exec/configure/policy-map/type/queuing/class

random-detect2 minimum-threshold2 maximum-threshold2

[no] random-detect2 minimum-threshold2 <min-thresh2> { packets2 | bytes2 | kbytes2 | mbytes2 } maximum-threshold2 <max-thresh2> { packets3 | bytes3 | kbytes3 | mbytes3 } [ drop-probability2 <drop-prob2> weight2 <weight2> [ cap-average2 ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

random-detect2

Configure WRED parameters

minimum-threshold2

Specify minimum threshold for WRED

maximum-threshold2

Specify maximum threshold for WRED

packets2

Packets

bytes2

Bytes

kbytes2

Kilo Bytes

mbytes2

Mega Bytes

packets3

Packets

bytes3

Bytes

kbytes3

Kilo Bytes

mbytes3

Mega Bytes

drop-probability2

(Optional) Drop Probability at Maximum Threshold

drop-prob2

(Optional) Drop Probability Value

weight2

(Optional) Queue length weight

weight2

(Optional) Queue length weight

cap-average2

(Optional) If average queue length is more, replace average queue length with current queue length

Command Mode

- /exec/configure/policy-map/type/queuing/class

random-detect2 non-ecn minimum-threshold2 maximum-threshold2 drop

[no] random-detect2 non-ecn minimum-threshold2 <min-thresh2> { packets2 | bytes2 | kbytes2 | mbytes2 } maximum-threshold2 <max-thresh2> { packets3 | bytes3 | kbytes3 | mbytes3 } { drop-probability2 <drop-prob2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

random-detect2

Configure WRED parameters

non-ecn

Configure WRED parameters for non-ecn

minimum-threshold2

Specify minimum threshold for WRED

maximum-threshold2

Specify maximum threshold for WRED

packets2

Packets

bytes2

Bytes

kbytes2

Kilo Bytes

mbytes2

Mega Bytes

packets3

Packets

bytes3

Bytes

kbytes3

Kilo Bytes

mbytes3

Mega Bytes

drop-probability2

Drop Probability at Maximum Threshold

drop-prob2

Drop Probability Value

Command Mode

- /exec/configure/policy-map/type/queuing/class

random-detect

[no] random-detect [ { minimum-threshold <min-thresh> { packets | bytes | kbytes | mbytes } maximum-threshold <max-thresh> { packets1 | bytes1 | kbytes1 | mbytes1 } drop-probability <drop-prob> weight <weight> [ cap-average ] } | threshold { burst-optimized | mesh-optimized } ] [ ecn ]

Syntax Description

no

(Optional) Negate a command or set its defaults

random-detect

Configure WRED parameters

threshold

(Optional) Threshold

burst-optimized

(Optional) Threshold optimized for bursty traffic

mesh-optimized

(Optional) Threshold optimized for mesh traffic

minimum-threshold

(Optional) Specify minimum threshold for WRED

maximum-threshold

(Optional) Specify maximum threshold for WRED

max-thresh

(Optional) Maximum threshold value

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

packets1

(Optional) Packets

bytes1

(Optional) Bytes

kbytes1

(Optional) Kilo Bytes

mbytes1

(Optional) Mega Bytes

drop-probability

(Optional) Drop Probability at Maximum Threshold

drop-prob

(Optional) Drop Probability Value

weight

(Optional) Queue length weight

weight

(Optional) Queue length weight

cap-average

(Optional) If average queue length is more, replace average queue length with current queue length

ecn

(Optional) ECN

Command Mode

- /exec/configure/policy-map/type/queuing/class

random-detect cos-based

[no] random-detect cos-based [ aggregate [ minimum-threshold ] { <min-thresh> [ packets | bytes | kbytes | mbytes | ms | us ] | percent <min-percent-of-qsize> } [ maximum-threshold ] { <max-thresh> [ packets1 | bytes1 | kbytes1 | mbytes1 | ms1 | us1 ] | percent1 <max-percent-of-qsize> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

random-detect

Configure WRED parameters

cos-based

Configure WRED parameters for cos-based mode

aggregate

(Optional) Configure WRED parameters to same value for all sub-classes

minimum-threshold

(Optional) Specify minimum threshold for WRED

maximum-threshold

(Optional) Specify maximum threshold for WRED

max-thresh

(Optional) Maximum threshold value

percent

(Optional) Specify thresholds in percent

percent1

(Optional) Specify thresholds in percent

min-percent-of-qsize

(Optional) Minimum threshold percent of queue size

max-percent-of-qsize

(Optional) Maximum threshold percent of queue size

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)

packets1

(Optional) Packets

bytes1

(Optional) Bytes

kbytes1

(Optional) Kilo Bytes

mbytes1

(Optional) Mega Bytes

ms1

(Optional) Milli second(s)

us1

(Optional) Micro second(s)

Command Mode

- /exec/configure/policy-map/type/queuing/class

rate-limit

rate-limit { auto | <rate_value> } | no rate-limit

Syntax Description

no

Negate a command or set its defaults

rate-limit

Set the Rate limit for SPAN packets

auto

Set the Rate limit using auto value

rate_value

Enter the percentage of the maximum rate for SPAN packets

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

rate-limit cpu direction pps action log

[no] rate-limit cpu direction { input | output | both } pps <pps-val> action log

Syntax Description

no

(Optional) Negate a command or set its defaults

rate-limit

set packet per second rate limit

cpu

Supervisor CPU limits

direction

input/output direction

input

set max input packet rate

output

set max output packet rate

both

set max input and output packet rate

pps

packet per second

pps-val

pps value

action

log action

log

write a syslog message if PPS hits rate-limit

Command Mode

- /exec/configure

rate-limit cpu direction pps action log

[no] rate-limit cpu direction { input | output | both } pps <pps-val> action log

Syntax Description

no

(Optional) Negate a command or set its defaults

rate-limit

set packet per second rate limit

cpu

Supervisor CPU limits

direction

input/output direction

input

set max input packet rate

output

set max output packet rate

both

set max input and output packet rate

pps

packet per second

pps-val

pps value

action

log action

log

write a syslog message if PPS hits rate-limit

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-eth-any /exec/configure/if-mgmt-config

rate-mode

rate-mode <ratemode> [ force ] | no rate-mode [ <ratemode> ] [ force ]

Syntax Description

no

Negate a command or set its defaults

rate-mode

Enter the rate mode

force

(Optional) This option will shutdown all ports in port-group momentarily

ratemode

Interface port speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

rd auto

{ rd { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } } | { no rd [ { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] }

Syntax Description

no

Negate a command or set its defaults

rd

VPN Route Distinguisher

auto

Generate RD automatically

ext-comm-rd-aa4nn2

VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

VPN route distinguisher in aa:nn format

Command Mode

- /exec/configure/evpn/evi

rd auto

{ rd { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } } | { no rd [ { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] }

Syntax Description

no

Negate a command or set its defaults

rd

VPN Route Distinguisher

auto

Generate RD automatically

ext-comm-rd-aa4nn2

VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

VPN route distinguisher in aa:nn format

Command Mode

- /exec/configure/vrf

reconnect-interval

reconnect-interval <interval> | no reconnect-interval [ <interval> ]

Syntax Description

no

Negate a command or set its defaults

reconnect-interval

Configure connection reconnect interval

interval

Interval in seconds

Command Mode

- /exec/configure/router-bgp/vrf-cmds

record-route

[no] record-route

Syntax Description

no

(Optional) Negate a command or set its defaults

record-route

Record the route used by the LSP

Command Mode

- /exec/configure/te/lsp-attr

record-route

[no] record-route

Syntax Description

no

(Optional) Negate a command or set its defaults

record-route

record the route used by the tunnel

Command Mode

- /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

record

[no] record <recordname>

Syntax Description

record

Specify Flow Record to use

recordname

Name of record

Command Mode

- /exec/configure/nfm-monitor

record netflow-original

[no] record netflow-original

Syntax Description

record

Specify Flow Record to use

netflow-original

Traditional IPv4 input NetFlow with origin ASs

Command Mode

- /exec/configure/nfm-monitor

record netflow

[no] record netflow { layer2-switched { input } }

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

layer2-switched

Traditional L2 NetFlow collection schemes

input

Input NetFlow

Command Mode

- /exec/configure/nfm-monitor

record netflow

[no] record netflow { ipv4 { original-input | original-output } }

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

ipv4

Traditional IPv4 NetFlow collection schemes

original-input

Traditional IPv4 input NetFlow

original-output

Traditional IPv4 output NetFlow

Command Mode

- /exec/configure/nfm-monitor

record netflow

[no] record netflow { ipv6 { original-input | original-output } }

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

ipv6

IPv6 collection schemes

original-input

Input NetFlow

original-output

Output NetFlow

Command Mode

- /exec/configure/nfm-monitor

record netflow protocol-port

[no] record netflow protocol-port

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

protocol-port

Protocol and Ports aggregation scheme

Command Mode

- /exec/configure/nfm-monitor

redistribute bgp

{ redistribute { { bgp <as> } | { eigrp | isis | ospfv3 | rip } <ptag> | static | direct | amt | lisp } route-map { <policy-name> | <rtr_pol_name> } } | { no redistribute { { bgp <as> } | { eigrp | isis | ospfv3 | rip } <ptag> | static | direct | amt | lisp } [ route-map { <policy-name> | <rtr_pol_name> } ] }

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Protocol (EIGRP)

isis

ISO Intermediate-to-Intermediate (IS-IS)

ospfv3

Open Shortest Path First (OSPFv3)

rip

Routing Information Protocol (RIP)

ptag

Process Tag

static

Static

direct

Directly connected

amt

AMT anycast prefix

lisp

LISP EID-prefixes

route-map

Policy to constrain redistribution

policy-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

redistribute bgp eigrp isis ospf rip static direct amt lisp route-map

{ redistribute { bgp <as> | { eigrp | isis | ospf | rip } <ptag> | static | direct | amt | lisp } route-map { <policy-name> | <rtr_pol_name> } } | { no redistribute { bgp <as> | { eigrp | isis | ospf | rip } <ptag> | static | direct | amt | lisp } [ route-map { <policy-name> | <rtr_pol_name> } ] }

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

ISO Intermediate-to-Intermediate (IS-IS)

ospf

Open Shortest Path First (OSPFv2)

eigrp

Enhanced Interior Gateway Protocol (EIGRP)

rip

Routing Information Protocol (RIP)

ptag

Protocol Tag

static

Static

direct

Directly connected

amt

AMT anycast prefix

lisp

LISP EID-prefixes

route-map

Policy to constrain redistribution

policy-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

redistribute filter route-map

[no] redistribute filter route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

filter

Filter redistributed routes

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

redistribute filter route-map

[no] redistribute filter route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

filter

Filter redistributed routes

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

redistribute maximum-prefix

redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] | no redistribute maximum-prefix [ <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] ]

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Max number of prefixes redistributed

maximum

max number

threshold

(Optional) Threshold in %, at which message is generated

warning-only

(Optional) Warning msg is logged when max is reached

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) No of times to retry to get redist routes again

timeout

(Optional) Time between the retries

Command Mode

- /exec/configure/router-isis/router-isis-af-ipv6

redistribute maximum-prefix

{ redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] } | { no redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] }

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Maximum number of prefixes redistributed to protocol

maximum

Maximum number of IP prefixes redistributed

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) Number of times to retry to get the redistributed routes again

timeout

(Optional) Timeout between each retries

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

redistribute maximum-prefix

redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] | no redistribute maximum-prefix [ <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] ]

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Max number of prefixes redistributed

maximum

max number

threshold

(Optional) Threshold in %, at which message is generated

warning-only

(Optional) Warning msg is logged when max is reached

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) No of times to retry to get redist routes again

timeout

(Optional) Time between the retries

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv4

redistribute maximum-prefix

{ redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] } | { no redistribute maximum-prefix }

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Maximum number of prefixes redistributed to protocol

maximum

Maximum number of IP prefixes redistributed

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) Number of times to retry to get the redistributed routes again

timeout

(Optional) Timeout between each retries

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

redistribute maximum-prefix

redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] | no redistribute maximum-prefix [ <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] ]

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Max number of prefixes redistributed

maximum

max number

threshold

(Optional) Threshold in %, at which message is generated

warning-only

(Optional) Warning msg is logged when threshold is reached

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) Number of attempts to receive redistributed routes after max is reached

timeout

(Optional) Retry interval

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt | lisp } route-map <map-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

isis

Intermediate-to-intermediate (ISIS)

rip

Routing Information Protocol (RIP)

ospfv3

Open Shortest Path First (OSPFv3)

tag

Process tag

static

Static routes

direct

Directly connected routes

amt

AMT anycast prefix

lisp

LISP EID-prefixes

route-map

Policy to constrain redistribution

map-name

Route-map name

Command Mode

- /exec/configure/router-rip/router-rip-af-ipv6 /exec/configure/router-rip/router-rip-vrf-af-ipv6

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } route-map <map-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

as

Autonomous system number

isis

Intermediate-to-intermediate (ISIS)

rip

Routing Information Protocol (RIP)

ospf

Open Shortest Path First (OSPFv2)

tag

Process tag

static

Static routes

direct

Directly connected routes

amt

AMT anycast prefix

lisp

LISP EID-prefixes

route-map

Policy to constrain redistribution

map-name

Route-map name

Command Mode

- /exec/configure/router-rip/router-rip-af-ipv4 /exec/configure/router-rip/router-rip-vrf-af-ipv4

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt } route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

eigrp

Enhanced Interior Gateway Protocol

rip

RIP for IPv4

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv4

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt } route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv6

ospfv3

Open Shortest Path First (OSPF) V3

eigrp

Enhanced Interior Gateway Protocol

rip

RIP for IPv6 (RIPNG)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/router-isis/router-isis-af-ipv6

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

lisp

LISP EID-prefixes

amt

AMT Anycast prefix

route-map

Route-map to constrain redistribution

map-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-ipv4

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt | lisp } route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospfv3

Open Shortest Path First (OSPF) V3

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT Anycast prefix

lisp

LISP EID-prefixes

route-map

Route-map to constrain redistribution

map-name

Route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/router-eigrp/router-eigrp-af-ipv6

redistribute route-map

[no] redistribute { static | direct | amt | lisp | am | hmm | { { eigrp | isis | ospf | rip } <tag> } } route-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Configure redistribution

static

Static routes

direct

Directly connected

isis

ISO IS-IS

ospf

Open Shortest Path First (OSPF)

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Protocol

amt

AMT anycast prefix

lisp

LISP EID-prefixes in the non-default VRF

am

AM routes (learned via ARP)

hmm

HMM prefix

route-map

Route-map applied to redistributed routes

rmap-name

Route-map name

tag

Source protocol tag

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

redistribute route-map

[no] redistribute { static | direct | amt | lisp | am | hmm | { { eigrp | isis | ospfv3 | rip } <tag> } } route-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Configure redistribution

static

Static routes

direct

Directly connected

isis

ISO IS-IS

ospfv3

Open Shortest Path First, version 3 (OSPFv3)

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Protocol

amt

AMT anycast prefix

lisp

LISP EID-prefixes in the non-default VRF

hmm

HMM prefix

am

AM routes (learned via ARP)

route-map

Route-map applied to redistributed routes

rmap-name

Route-map name

tag

Source protocol tag

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt } route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

eigrp

Enhanced Interior Gateway Protocol

rip

RIP for IPv4

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-af-ipv4

redistribute route-map

[no] redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt } route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv6

ospfv3

Open Shortest Path First (OSPF) V3

eigrp

Enhanced Interior Gateway Protocol

rip

RIP for IPv6 (RIPNG)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-af-ipv6

redownload forwarding state

redownload forwarding [ ipv4 | ipv6 | all ] state

Syntax Description

redownload

redownload

forwarding

forwarding

ipv4

(Optional) ipv4

ipv6

(Optional) ipv6

all

(Optional) both ipv4 and ipv6

state

state

Command Mode

- /exec

redundancy-group

[no] redundancy-group

Syntax Description

no

(Optional) Negate a command or set its defaults

redundancy-group

Configure a redundancy-group node

Command Mode

- /exec/configure/if-nve

reference-bandwidth

[no] reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps }

Syntax Description

no

(Optional) Negate a command or set its defaults

reference-bandwidth

Change reference bandwidth used for setting interface metric

ref-bw-mbps

Bandwidth in Mbps (Default)

Mbps

(Optional) Specify in Mbps

ref-bw-gbps

Bandwidth in Gbps

Gbps

Specify in Gbps

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

reference-bandwidth

[no] reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps }

Syntax Description

no

(Optional) Negate a command or set its defaults

reference-bandwidth

Change reference bandwidth used for setting interface metric

ref-bw-mbps

Bandwidth in Mbps (Default)

Mbps

(Optional) Specify in Mbps

ref-bw-gbps

Bandwidth in Gbps

Gbps

Specify in Gbps

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

refresh profile-diff

refresh profile-diff <src-profile> <dest-profile> [ cleanup destination-profile ]

Syntax Description

refresh

Refresh an applied config profile instance

profile-diff

Generate the diff between source and destinatin profile instances

cleanup

(Optional) Profile cleanup options after diff calculation

destination-profile

(Optional) Clean up destination profile after diff calculation

src-profile

Enter the name of the instance

dest-profile

Enter the name of the include profile

Command Mode

- /exec

refresh profile

[no] refresh profile <profile> <dest-profile> [ overwrite ]

Syntax Description

no

(Optional) Negate a command or set its defaults

refresh

Refresh config-profile

profile

Refresh an applied config-profile

profile

Enter the name of an applied profile as the source profile

dest-profile

Enter the name of an unapplied profile as the destination profile

overwrite

(Optional) Override the source profile with the destination profile

Command Mode

- /exec

register-database-mapping

{ [ no ] register-database-mapping }

Syntax Description

no

(Optional) Negate a command or set its defaults

register-database-mapping

Register database-mapping EID-prefix to Map-Server

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

register-route-notifications

{ [ no ] register-route-notifications }

Syntax Description

no

(Optional) Negate a command or set its defaults

register-route-notifications

Register more-specific routes of the database-mapping EID-prefix to Map-Server

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

reload

reload

Syntax Description

reload

reboot the entire box

Command Mode

- /exec

reload ascii

reload ascii [ vdc-all ]

Syntax Description

reload

Power cycle

ascii

Reload with ASCII startup-configuration

vdc-all

(Optional) Perform for all vdcs

Command Mode

- /exec

reload fex

reload fex { all | <i> }

Syntax Description

reload

reboot the entire box

fex

Reload Fex

all

Reload all Fex Modules

i

Enter FEX identifier

Command Mode

- /exec

reload force

reload force

Syntax Description

reload

reboot the entire box

force

reload without prompting

Command Mode

- /exec

reload kexec

reload kexec <s0> <s1>

Syntax Description

reload

reboot the entire box

kexec

reboot using kexec

s0

please enter the boot image name

s1

please enter the isan image name

Command Mode

- /exec

reload kexec

reload kexec

Syntax Description

reload

reboot the entire box

kexec

reboot using kexec

Command Mode

- /exec

reload module

reload module <module>

Syntax Description

reload

reboot the entire box

module

reboot a specific module

module

please enter the module number

Command Mode

- /exec

reload module force-dnld

reload module <module> force-dnld

Syntax Description

reload

reboot the entire box

module

reboot a specific module

module

please enter the module number

force-dnld

reboot a specific module to force NetBoot and image download

Command Mode

- /exec

reload module hard

reload module <module> hard

Syntax Description

reload

reboot the entire box

module

reboot a specific module

module

please enter the module number

hard

hard reboot a specific module

Command Mode

- /exec

reload non-interruptive

reload non-interruptive

Syntax Description

reload

reboot the entire box

non-interruptive

Reboot without interruption

Command Mode

- /exec

reload power-cycle

reload power-cycle

Syntax Description

reload

reboot the entire box

power-cycle

Power cycle ADM

Command Mode

- /exec

reload restore

reload restore [ delay <time-out> ] | no reload restore

Syntax Description

no

Negate a command or set its defaults

reload

Settings for vpc action on reload with vpc configs

restore

restore vpcs assuming peer is not functional

delay

(Optional) Duration to wait before assuming peer dead and restoring vpcs

time-out

(Optional) Time-out for restoring vPC links (in seconds)

Command Mode

- /exec/configure/vpc-domain

reload sync-adjacency

reload sync-adjacency

Syntax Description

reload

reload with sync adjacency

sync-adjacency

Reload with ARP/ND sync adjacency

Command Mode

- /exec

reload sync-adjacency

reload sync-adjacency

Syntax Description

reload

reboot the entire box

sync-adjacency

Reload with sync adjacency

Command Mode

- /exec

reload vdc

reload vdc

Syntax Description

vdc

Restart the current vdc

reload

Power cycle

Command Mode

- /exec

reload vdc

reload vdc <d-vdc>

Syntax Description

vdc

Restart the current vdc

reload

Power cycle

d-vdc

Enter Virtual Device Context <vdc-id>

Command Mode

- /exec

remark

{ [ <seqno> ] | no } remark <comment>

Syntax Description

no

Negate a command or set its defaults

seqno

(Optional) Sequence number

remark

Access list entry comment

comment

Comment, up to 100 characters

Command Mode

- /exec/configure/ipacl /exec/configure/ipv6acl

remark

{ [ <seqno> ] | no } remark <comment>

Syntax Description

no

Negate a command or set its defaults

seqno

(Optional) Sequence number

remark

Access list entry comment

comment

Comment, up to 100 characters

Command Mode

- /exec/configure/arpacl /exec/configure/timerange

remark

{ [ <seqno> ] | no } remark <comment>

Syntax Description

no

Negate a command or set its defaults

seqno

(Optional) Sequence number

remark

Access list entry comment

comment

Comment, up to 100 characters

Command Mode

- /exec/configure/macacl

remote-as

{ remote-as <asn> } | { { no | default } remote-as [ <asn> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

remote-as

Specify Autonomous System Number of the neighbor

asn

Autonomous System Number

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

remote-span

[no] remote-span

Syntax Description

no

(Optional) Negate a command or set its defaults

remote-span

Enable remote span VLAN

Command Mode

- /exec/configure/vlan

remote

remote { { ip address { <ipaddress> } | hostname <host_name> } [ port <port_no> ] [ vrf { <vrf-name> | <vrf-known-name> } ] | port <port_no> | vrf { <vrf-name> | <vrf-known-name> } } | no remote { ip address | hostname | port }

Syntax Description

no

Negate a command or set its defaults

remote

Configure remote machine information

ip

Configure IP features

address

Configure IP address

ipaddress

Enter ipv4 address information

hostname

Configure remote host name

host_name

Enter name of the remote host

port

(Optional) Configure remote host tcp port

port_no

(Optional) Configure the host tcp port number

vrf

(Optional) vrf via which the vCenter Server is reachable

vrf-name

(Optional) Specify the vrf-name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure/vmt-conn

remove-private-as

[ no | default ] remove-private-as [ all | replace-as ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

remove-private-as

Remove private AS number from outbound updates

all

(Optional) All

replace-as

(Optional) Replace

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

remove-routes vni

remove-routes vni <vni-id>

Syntax Description

remove-routes

NVE Peer

vni

Virtual Network Identifier

vni-id

VNI

Command Mode

- /exec/configure/if-nve

remove cli commands

remove cli commands <filename>

Syntax Description

remove

remove

cli

cli

commands

commands

filename

filename

Command Mode

- /exec

reoptimize events link-up

[no] reoptimize events link-up | no reoptimize timers { delay { cleanup | installation } | frequency } | reoptimize timers { delay { cleanup <clean_sec> | installation <inst_sec> } | frequency <freq_sec> }

Syntax Description

no

(Optional) Negate a command or set its defaults

reoptimize

Reoptimization parameters

events

Reoptimization triggers

link-up

Reoptimize tunnels on link up events

timers

Reoptimization timers

delay

Delay reoptimization action

cleanup

Delay cleanup of reoptimized LSP

clean_sec

seconds to delay cleanup of replaced tunnel LSP

installation

Delay replacement of current LSP by reoptimized LSP

inst_sec

seconds to delay replacement of tunnel LSP

frequency

Interval between reoptimization scans

freq_sec

seconds between reoptimizations (0 disables reoptimization)

Command Mode

- /exec/configure/te

replay-protection

[no] replay-protection

Syntax Description

replay-protection

Enable replay-protection (the default use the no form to disable)

Command Mode

- /exec/configure/cts-dot1x /exec/configure/cts-manual

replication-server

[no] replication-server <addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

replication-server

Configure a replication server

addr

Replication Server IP Address

Command Mode

- /exec/configure/if-nve

report

report

Syntax Description

report

Show trigger report

Command Mode

- /exec/elamns/sel7

report

report

Syntax Description

report

Show trigger report

Command Mode

- /exec/elamns/sel3

report

report

Syntax Description

report

Show trigger report

Command Mode

- /exec/elamns/sel4

report

report

Syntax Description

report

Show trigger report

Command Mode

- /exec/elamns/sel5

report

report

Syntax Description

report

Show trigger report

Command Mode

- /exec/elamns/sel6

report

report

Syntax Description

report

Show trigger report

Command Mode

- /exec/elamns/outsel0

report

report

Syntax Description

report

Show trigger report

Command Mode

- /exec/elamns/outsel5

request-data-size

{ { no | default } request-data-size | request-data-size <bytes-in-payload> }

Syntax Description

no

default

Set a command to its defaults

request-data-size

Request data size

bytes-in-payload

Number of bytes in payload

Command Mode

- /exec/configure/ip-sla/icmpEcho

request-data-size

{ { no | default } request-data-size | request-data-size <bytes-in-payload> }

Syntax Description

no

default

Set a command to its defaults

request-data-size

Request data size

bytes-in-payload

Number of bytes in payload

Command Mode

- /exec/configure/ip-sla/udp

request-data-size

{ { no | default } request-data-size | request-data-size <bytes-in-payload> }

Syntax Description

no

default

Set a command to its defaults

request-data-size

Request data size

bytes-in-payload

Number of bytes in payload

Command Mode

- /exec/configure/ip-sla/jitter

resequence access

resequence { { <ip_ipv6_mac_arp> access-list } | time-range } <name> <number> <increment>

Syntax Description

resequence

Resequence a list with sequence numbers

ip_ipv6_mac_arp

IP/IPv6/MAC/ARP

access-list

Resequence an access list

time-range

Resequence a time-range

name

List name

number

Starting sequence number

increment

Step to increment the sequence number

Command Mode

- /exec/configure

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

- /exec/elamns/outsel0

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

- /exec/elamns/sel3

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

- /exec/elamns/sel4

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

- /exec/elamns/sel5

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

- /exec/elamns/sel6

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

- /exec/elamns/sel7

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

- /exec/elamns/outsel5

restart amt

restart amt

Syntax Description

restart

Manually restart a component

amt

Restart the AMT multicast routing protocol

Command Mode

- /exec

restart bgp

restart bgp <as>

Syntax Description

restart

Manually restart a component

bgp

Border Gateway Protocol (BGP)

as

Autonomous

Command Mode

- /exec

restart eigrp

restart eigrp <eigrp-ptag>

Syntax Description

restart

Manually restart a component

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

eigrp-ptag

Process tag

Command Mode

- /exec

restart fabricpath domain

restart fabricpath domain

Syntax Description

restart

Manually restart a component

fabricpath

Data Center Intermediate System to Intermediate System (L2MP-IS-IS)

domain

Fabricpath IS-IS domain

Command Mode

- /exec

restart igmp

restart igmp

Syntax Description

restart

Manually restart a component

igmp

Restart the IGMP multicast routing protocol

Command Mode

- /exec

restart isis

restart isis <tag>

Syntax Description

restart

Manually restart a component

isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

- /exec

restart l3vm

restart l3vm

Syntax Description

restart

Manually restart a component

l3vm

Display VRF information

Command Mode

- /exec

restart lisp

restart lisp

Syntax Description

restart

Manually restart a component

lisp

Restart the LISP Locator/ID Separation Protocol

Command Mode

- /exec

restart msdp

restart msdp

Syntax Description

restart

Manually restart a component

msdp

Restart the MSDP multicast routing protocol

Command Mode

- /exec

restart orib

restart orib

Syntax Description

restart

Manually restart a component

orib

OTV RIB (ORIB)

Command Mode

- /exec

restart ospf

restart ospf <tag>

Syntax Description

restart

Manually restart a component

ospf

Open Shortest Path First (OSPF)

tag

Process tag

Command Mode

- /exec

restart ospfv3

restart ospfv3 <tag>

Syntax Description

restart

Manually restart a component

ospfv3

Open Shortest Path First (OSPF) (Version 3)

tag

Process tag

Command Mode

- /exec

restart otv-isis

restart otv-isis <tag>

Syntax Description

restart

Manually restart a component

otv-isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

- /exec

restart otv

restart otv

Syntax Description

restart

Manually restart a component

otv

Overlay Transport Virtualization (OTV)

Command Mode

- /exec

restart pim

restart pim

Syntax Description

restart

Manually restart a component

pim

Restart the PIM multicast routing protocol

Command Mode

- /exec

restart pim6

restart pim6

Syntax Description

restart

Manually restart a component

pim6

Restart the PIM6 multicast routing protocol

Command Mode

- /exec

restart rip

restart rip <tag>

Syntax Description

restart

Manually restart a component

rip

Routing Information Protocol (RIP)

tag

Process ID

Command Mode

- /exec

restart rpm

restart rpm

Syntax Description

restart

Manually restart a component

rpm

Route Policy Manager (RPM)

Command Mode

- /exec

restart rsvp

restart rsvp

Syntax Description

restart

Manually restart a process

rsvp

RSVP process

Command Mode

- /exec

resync-database

resync-database

Syntax Description

resync-database

Re-synchronize switch-profile database

Command Mode

- /exec/configure

retain route-target all

[no] retain route-target { all | route-map <rmap-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

retain

Retain the routes based on Target VPN Extended Communities

route-target

Specify Target VPN Extended Communities

all

All the routes regardless of Target-VPN community

route-map

Apply route-map to filter routes

rmap-name

Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls

retain route-target all

[no] retain route-target { all | route-map <rmap-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

retain

Retain the routes based on Target VPN Extended Communities

route-target

Specify Target VPN Extended Communities

all

All the routes regardless of Target-VPN community

route-map

Apply route-map to filter routes

rmap-name

Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-link-state /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

retransmit-interval

{ { retransmit-interval <interval> } | { no retransmit-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

retransmit-interval

{ { retransmit-interval <interval> } | { no retransmit-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

retransmit-interval

{ { retransmit-interval <interval> } | { no retransmit-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

revision

revision <rev-id> | no revision [ <rev-id> ]

Syntax Description

no

Negate a command or set its defaults

revision

Set configuration revision number

rev-id

Configuration revision number

Command Mode

- /exec/configure/spanning-tree/mst/configuration

revocation-check crl

[no] revocation-check { crl [ none ] | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

revocation-check

Configure trustpoint revocation check methods

crl

Configure revocation check using crl

none

(Optional) Configure revocation check using none

none

Configure revocation check using none

Command Mode

- /exec/configure/trustpoint

rewrite-evpn-rt-asn

[ no | default ] rewrite-evpn-rt-asn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

rewrite-evpn-rt-asn

Auto generate RTs for EBGP neighbor in EVPN AF

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

rfc1583compatibility

[no] rfc1583compatibility

Syntax Description

no

(Optional) Negate a command or set its defaults

rfc1583compatibility

Configure 1583 compatibility for external path preferences

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

rip shutdown

[no] rip shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

rip

RIP configuration commands

shutdown

Shutdown RIP on this interface

Command Mode

- /exec/configure/if-igp

rmdir

rmdir { <uri0> | <uri1> }

Syntax Description

rmdir

Delete a directory

uri0

Delete a directory

uri1

Delete a directory on expansion flash

Command Mode

- /exec

rmon alarm absolute rising-threshold falling-threshold

rmon alarm <i0> <s0> <i1> { absolute | delta } rising-threshold <i2> [ <i3> ] falling-threshold <i4> [ <i5> ] [ owner <s1> ] | no rmon alarm <i0>

Syntax Description

no

Negate a command or set its defaults

rmon

Remote Monitoring

alarm

Configure an RMON alarm

i0

Alarm number

s0

MIB object to monitor

i1

Sample interval

absolute

Test each sample directly

delta

Test delta between samples

rising-threshold

Configure the rising threshold

i2

Rising threshold value

i3

(Optional) Event to fire on rising threshold crossing

falling-threshold

Configure the falling threshold

i4

Falling threshold value

i5

(Optional) Event to fire on falling threshold crossing

owner

(Optional) Specify an owner for the alarm

s1

(Optional) Alarm owner

Command Mode

- /exec/configure

rmon event

rmon event <i0> [ log ] [ trap <s0> ] [ description <s1> ] [ owner <s2> ] | no rmon event <i0>

Syntax Description

no

Negate a command or set its defaults

rmon

Remote Monitoring

event

Configure an RMON event

i0

Event number

log

(Optional) Generate RMON log when the event fires

trap

(Optional) Generate SNMP trap when event fires

s0

(Optional) SNMP community string

description

(Optional) Specify a description of the event

s1

(Optional) Event description

owner

(Optional) Specify an owner for the event

s2

(Optional) Event owner

Command Mode

- /exec/configure

rmon hcalarm absolute startupalarm rising-threshold falling-threshold owner

rmon hcalarm <i0> <s0> <i1> { absolute | delta } startupalarm <i2> rising-threshold <i3> <i4> falling-threshold <i5> <i6> owner <s1> | no rmon hcalarm <i0>

Syntax Description

no

Negate a command or set its defaults

rmon

Remote Monitoring

hcalarm

Configure an High Capacity RMON alarm

i0

Alarm number

s0

MIB object to monitor

i1

Sample interval

absolute

Test each sample directly

delta

Test delta between samples

startupalarm

Configure alarm type

i2

Startup alarm type, rising(1) falling(2) risingorfalling(3)

rising-threshold

Configure the rising threshold

i3

Rising threshold value in bytes

i4

Event to fire on rising threshold crossing

falling-threshold

Configure the falling threshold

i5

Falling threshold value in bytes

i6

Event to fire on falling threshold crossing

owner

Specify an owner for the alarm

s1

Alarm owner

Command Mode

- /exec/configure

roaming-eid-prefix

{ [ no ] roaming-eid-prefix { <eid-prefix> | <eid-prefix6> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

roaming-eid-prefix

Configures what EID-prefixes allowed to roam

eid-prefix

IPv4 roaming EID-prefix

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

role feature-group name

[no] role feature-group name <arg6>

Syntax Description

no

(Optional) Negate a command or set its defaults

role

Configure roles

feature-group

Configure role feature-group

name

Feature-group name

arg6

Enter feature-group name

Command Mode

- /exec/configure

role name

[no] role name <arg2>

Syntax Description

no

(Optional) Negate a command or set its defaults

role

Configure roles

name

Enter the role name

arg2

Enter the role name

Command Mode

- /exec/configure

role priority

role priority <priority_value> | no role priority

Syntax Description

no

Negate a command or set its defaults

role

Role related configuration

priority

Configure priority to be used during vPC role (primary/secondary) election

priority_value

specify priority value

Command Mode

- /exec/configure/vpc-domain

rollback progress stats

[no] rollback progress stats

Syntax Description

no

(Optional) negate the command

rollback

Rollback configuration

progress

Rollback progress

stats

Enable rollback progress stats

Command Mode

- /exec

rollback running-config checkpoint

rollback running-config { checkpoint <chkpoint_name> | file <file_uri> } [ best-effort | stop-at-first-failure | atomic ] [ verbose ]

Syntax Description

rollback

Rollback configuration

running-config

Rollback running configuration

checkpoint

Rollback running configuration to checkpoint

chkpoint_name

Checkpoint name

file

Rollback running configuration to configuration file

file_uri

Checkpoint file path

best-effort

(Optional) Skip errors and proceed with rollback

stop-at-first-failure

(Optional) Stop rollback at the first error

atomic

(Optional) Stop rollback and revert to original configuration (default)

verbose

(Optional) Show the execution log

Command Mode

- /exec

root-priority

[no] root-priority <root-pri>

Syntax Description

no

(Optional) Negate a command or set its defaults

root-priority

Set priority with which nodes becomes root

root-pri

Root priority value per topology

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

route-map

route-map <rtmap-name> [ permit | deny ] <seq>

Syntax Description

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

seq

Sequence to insert to/delete from existing route-map entry

Command Mode

- /exec/configure

route-map

route-map <rtmap-name> [ permit | deny ]

Syntax Description

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

Command Mode

- /exec/configure

route-map

[no] route-map { <rtmap-name> | <rtmap-name> } [ permit | deny ]

Syntax Description

no

Negate a command or set its defaults

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

rtmap-name

Known route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

Command Mode

- /exec/configure

route-map

[no] route-map { <rtmap-name> | <rtmap-name> } [ permit | deny ] <seq>

Syntax Description

no

Negate a command or set its defaults

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

rtmap-name

Known route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

seq

Sequence to insert to/delete from existing route-map entry

Command Mode

- /exec/configure

route-map out

[ no | default ] route-map <rmap-name> { out | in }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

route-map

Apply route-map to neighbor

rmap-name

Route-map name

out

Apply policy to outgoing routes

in

Apply policy to incoming routes

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

route-map pbr-statistics

route-map <route-map-name> pbr-statistics | no route-map { <route-map-name> | <route-map-name> } pbr-statistics

Syntax Description

no

Negate a command or set its defaults

route-map

Create route-map or enter route-map command mode

route-map-name

Route-map name

route-map-name

Route-map name

route-map-name

Known route-map name

pbr-statistics

Statistics for policy based routing

Command Mode

- /exec/configure

route-reflector-client

[ no | default ] route-reflector-client

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

route-reflector-client

Configure a neighbor as Route reflector client

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

route-reflector-client

[ no | default ] route-reflector-client

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

route-reflector-client

Configure a neighbor as Route reflector client

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

route-target both auto

{ route-target both { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] } | { no route-target both [ auto [ evpn | mvpn ] | <ext-comm-rt-aa2nn4> [ evpn | mvpn ] | <ext-comm-rt-aa4nn2> [ evpn | mvpn ] ] }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

both

Export And Import Target-VPN community

auto

Generate route target automatically

evpn

(Optional) Specify Target for EVPN routes

mvpn

(Optional) Specify Target for MVPN routes

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

route-target both auto

{ route-target both { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target both { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

auto

Generate RT automatically

both

Export and Import Target-VPN community

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

- /exec/configure/evpn/evi

route-target export

{ route-target export { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] } | { no route-target export { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

export

Export Target-VPN community

evpn

(Optional) Specify Target for EVPN routes

mvpn

(Optional) Specify Target for MVPN routes

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

route-target export auto

{ route-target export { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target export { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

auto

Generate RT automatically

export

Export Target-VPN community

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

- /exec/configure/evpn/evi

route-target import

{ route-target import { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] } | { no route-target import { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

import

Import Target-VPN community

evpn

(Optional) Specify Target for EVPN routes

mvpn

(Optional) Specify Target for MVPN routes

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

- /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

route-target import auto

{ route-target import { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target import { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

import

Import Target-VPN community

auto

Generate RT automatically

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

- /exec/configure/evpn/evi

route delete dampen interval

[no] route delete dampen interval <time>

Syntax Description

no

(Optional) Negate a command or set its defaults

route

Display routing information

delete

Dampen route delete update to hardware

dampen

Dampen update to hardware

interval

Dampen interval

time

Dampen interval in seconds

Command Mode

- /exec/configure

router-guard ip multicast

[no] router-guard ip multicast [ vlan <vlan_id> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

router-guard

Configures router guard for all interfaces

ip

Configure IP features

multicast

router-guard for multicast packet processing

vlan

(Optional) Configures router guard for specified vlan only(only in trunk ports)

vlan_id

(Optional) Specify vlan-id

Command Mode

- /exec/configure/if-switching

router-guard ip multicast switchports

[no] router-guard ip multicast switchports

Syntax Description

no

(Optional) Negate a command or set its defaults

router-guard

Configures router guard for all interfaces

ip

Configure IP features

multicast

router-guard for multicast packet processing

switchports

configures on all switchports globally

Command Mode

- /exec/configure

router-id

{ { router-id <id> } | { no router-id [ <id> ] } }

Syntax Description

no

Negate a command or set its defaults

router-id

Set OSPF process router-id

id

Router ID Value

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

router-id

router-id [ vrf { <vrf-name> | <vrf-known-name> } ] <interface> [ force ] | no router-id [ { vrf { <vrf-name> | <vrf-known-name> } | <interface> [ force ] } ]

Syntax Description

no

Negate a command or set its defaults

router-id

Select interface to prefer for LDP identifier address

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

interface

force

(Optional) Forcibly change the LDP router id

Command Mode

- /exec/configure/ldp

router-id

{ { router-id <id> } | { no router-id [ <id> ] } }

Syntax Description

no

Negate a command or set its defaults

router-id

Set OSPFv3 process router-id

id

Router ID Value

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

router-id

{ { [ eigrp ] router-id <id> } | { no [ eigrp ] router-id [ <id> ] } }

Syntax Description

no

Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

router-id

router-id for this EIGRP process

id

EIGRP Router-ID in IP address format

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

router-id

[no] router-id <router-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

router-id

Specify the IP address to use as router-id

router-id

Manually configured router identifier

Command Mode

- /exec/configure/router-bgp/vrf-cmds

router bgp

[no] router bgp <as>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

bgp

Border Gateway Protocol (BGP)

as

Autonomous

Command Mode

- /exec/configure

router eigrp

[no] router eigrp <eigrp-ptag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

eigrp-ptag

Process tag

Command Mode

- /exec/configure

router isis

[no] router isis <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

- /exec/configure

router ospf

[no] router ospf <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

ospf

Open Shortest Path First (OSPF)

tag

Process tag

Command Mode

- /exec/configure

router ospfv3

[no] router ospfv3 <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

ospfv3

Open Shortest Path First (OSPF) (Version 3)

tag

Process tag

Command Mode

- /exec/configure

router rip

[no] router rip <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

rip

Routing Information Protocol (RIP)

tag

Process ID

Command Mode

- /exec/configure

routing-context vrf

routing-context vrf <vrf-known-name>

Syntax Description

routing-context

Set the routing context

vrf

The new routing-context VRF

vrf-known-name

Known VRF name

Command Mode

- /exec

routing ipv4 unicast nexthop-sorting

[no] routing ipv4 unicast nexthop-sorting

Syntax Description

no

(Optional) Negate a command or set its defaults

routing

Routing events

ipv4

IP events

unicast

unicast

nexthop-sorting

Sort nhs while storing

Command Mode

- /exec/configure

routing ipv6 unicast nexthop-sorting

[no] routing ipv6 unicast nexthop-sorting

Syntax Description

no

(Optional) Negate a command or set its defaults

routing

Routing events

ipv6

Configure IPv6 features

unicast

unicast

nexthop-sorting

Sort nhs while storing

Command Mode

- /exec/configure

rsakeypair

[no] rsakeypair <s0> [ <i0> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

rsakeypair

Configure trustpoint rsa key-pair details

s0

key-pair label

i0

(Optional) key-pair size

Command Mode

- /exec/configure/trustpoint

rtr etr eid

[no] { rtr | etr | eid } { <locator> | <locator6> } [ strict | probe ] + <seq>

Syntax Description

no

(Optional) Negate a command or set its defaults

rtr

Configure RTR in ELP ordered list

etr

Configure ETR in ELP ordered list

eid

Configure EID in ELP ordered list

locator

IPv4 locator for RTR/ETR or EID

strict

(Optional) ELP hop must be used in Explicit Locator Path

probe

(Optional) RLOC-probe next-hop in ELP

seq

Sequence to insert or delete RTR/ETR/EID ELP entry

Command Mode

- /exec/configure/lisp-elp /exec/configure/vrf/lisp-elp

rule

rule <number> { <action> } { { <permission> [ <featuretype> <name> ] } } | no rule <number>

Syntax Description

no

Negate a command or set its defaults

rule

Enter the rule number

number

Enter the rule number

action

Action

permission

Permission

featuretype

(Optional) Feature type

name

(Optional) Enter the access entity name

Command Mode

- /exec/configure/role

rule command

rule <number> { <action> } { command <cmd_line> } | no rule <number>

Syntax Description

no

Negate a command or set its defaults

rule

Enter the rule number

number

Enter the rule number

action

Action

command

Command line

cmd_line

Enter the command (use space+' ' for command separator) e.g. config t role *

Command Mode

- /exec/configure/role

rule oid

rule <number> <action> <permission> oid <snmp_oid> | no rule <number>

Syntax Description

no

Negate a command or set its defaults

rule

Enter the rule number

number

Enter the rule number

action

Action

permission

Permission

oid

SNMP oid (up to 32 elements)

snmp_oid

Enter snmp oid instance name

Command Mode

- /exec/configure/role

run-script

run-script <uri0>

Syntax Description

run-script

Run shell scripts

uri0

Enter script file name

Command Mode

- /exec

run-show-tech-script

run-show-tech-script <s0>

Syntax Description

run-show-tech-script

Run show tech script

s0

fname

Command Mode

- /exec

run2 guestshell

run2 guestshell [ { <cmd_args> } ]

Syntax Description

run2

execute/run program!!!

guestshell

The guest shell Linux-bash

cmd_args

(Optional) The command to execute

Command Mode

- /exec

run bash

run bash [ <cmd> ]

Syntax Description

run

execute/run program

bash

linux-bash

cmd

(Optional) the command to execute

Command Mode

- /exec

Chapter 20. S Commands

- sak-expiry-time

- sampler

- sampling

- sap hash-algorithm HMAC-SHA-1

- sap modelist

- sap pmk sap pmk use-dot1x

- save

- scale-factor module

- scheduler aaa-authentication

- scheduler enable

- scheduler job name

- scheduler logfile size

- scheduler schedule name

- scheduler transport email

- scp

- scp

- scripting tcl init

- scripting tcl recursion-limit

- search

- section

- secure-handoff

- security-policy

- sed

- segment-routing mpls

- send-community

- send-community

- send-community extended

- send-lifetime month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l duration infinite month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l

- send-lifetime month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l duration infinite month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l

- send

- send session

- sensor-group

- serial

- server

- server

- server

- server protocol ldap

- server protocol radius group

- server protocol xmpp ip

- service-policy

- service-policy

- service-policy

- service-policy input

- service-policy type network-qos

- service-policy type psp

- service-policy type qos

- service-policy type queuing

- service-policy type queuing

- service-policy type queuing

- service dhcp

- service set

- service tag

- service unsupported-transceiver

- session-limit

- session domain-lookup

- session key-required

- session max

- session max

- session protection

- set-attached-bit

- set-overload-bit

- set-overload-bit

- set

- set

- set

- set

- set

- set

- set as-path prepend last-as tag

- set comm-list delete

- set community none additive internet local-AS

- set cos

- set cos

- set dampening

- set distance

- set extcomm-list delete

- set extcommunity 4byteas-generic transitive additive

- set extcommunity additive

- set extcommunity cost

- set extcommunity rt additive

- set extension-key

- set forwarding-address

- set inner ipv4

- set inner ipv4

- set inner l2

- set inner l2

- set inner l2 hg2

- set inner l2 hg2

- set inner l4

- set inner l4

- set interface

- set interval find-new-host

- set interval pending-task-polling

- set interval sync-full-info

- set ip address prefix-list

- set ip default next-hop

- set ip default next-hop verify-availability

- set ip next-hop

- set ip next-hop peer-address

- set ip next-hop redist-unchanged

- set ip next-hop unchanged

- set ip next-hop verify-availability

- set ip precedence

- set ipv6 address prefix-list

- set ipv6 default next-hop

- set ipv6 default next-hop verify-availability

- set ipv6 next-hop

- set ipv6 next-hop peer-address

- set ipv6 next-hop redist-unchanged

- set ipv6 next-hop unchanged

- set ipv6 next-hop verify-availability

- set ipv6 precedence

- set label-index

- set level level-1 level-1-2 level-2

- set local-preference

- set metric

- set mpls-exp-topmost cos table exp-cos-map

- set nssa-only

- set origin egp

- set origin egp igp incomplete

- set outer ipv4

- set outer l2

- set outer l2 hg2

- set outer l4

- set path-selection all advertise

- set pktmgr pds yield-threshold

- set pktrw

- set sideband

- set tag

- set weight

- setup

- sflow

- sflow

- sflow cpu-usage limit

- sflow data-source interface

- sflow data-source interface

- sflow extended switch

- shape

- shared-secret

- shut

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown

- shutdown force

- shutdown lan

- shutdown lan

- signalling advertise explicit-null

- signalling client batch-time

- signalling hello graceful-restart

- signalling hello graceful-restart refresh interval

- signalling hello graceful-restart refresh misses

- signalling hello graceful-restart send recovery-time

- signalling hello graceful-restart send restart-time

- signalling hello reroute

- signalling initial-retransmit-delay

- signalling patherr state-removal

- signalling rate-limit

- signalling refresh interval

- signalling refresh misses

- signalling refresh pace

- signalling refresh reduction

- signalling refresh reduction ack-delay

- signalling refresh reduction bundle-max-size

- signalling refresh reduction bundle-transmit-time

- signalling refresh reduction rapid-retransmit

- signing level

- site-id

- site-of-origin

- slave ipv4

- sleep

- sleep instance

- slot

- smtp-host smtp-port reply-to from

- snapshot create

- snapshot delete

- snapshot delete ALL

- snapshot section add

- snapshot section delete

- snmp-server aaa-user cache-timeout

- snmp-server community

- snmp-server community

- snmp-server community use-acl

- snmp-server contact

- snmp-server context

- snmp-server context type len val

- snmp-server counter cache-enable

- snmp-server counter cache enable

- snmp-server counter cache timeout

- snmp-server enable traps

- snmp-server enable traps bgp

- snmp-server enable traps bgp cbgp2

- snmp-server enable traps bgp cbgp2 threshold prefix

- snmp-server enable traps bgp threshold prefix

- snmp-server enable traps eigrp

- snmp-server enable traps ospf

- snmp-server enable traps ospf lsa

- snmp-server enable traps ospf rate-limit

- snmp-server enable traps ospfv3

- snmp-server enable traps ospfv3 lsa

- snmp-server enable traps ospfv3 rate-limit

- snmp-server enable traps storm-control trap-rate

- snmp-server engineID local

- snmp-server force-unload-feature

- snmp-server globalEnforcePriv

- snmp-server host

- snmp-server host filter-vrf

- snmp-server host source

- snmp-server host use-vrf

- snmp-server host use_vrf

- snmp-server load-cond-feature

- snmp-server load-mib

- snmp-server location

- snmp-server mib community-map context

- snmp-server mib mpls vpn max-threshold

- snmp-server protocol enable

- snmp-server source-interface informs

- snmp-server source-interface traps

- snmp-server system-shutdown

- snmp-server tcp-session

- snmp-server user

- snmp-server user

- snmp-trap event-type policy-name

- snmp ifmib ifalias long

- snmp trap link-status

- snmp trap link-status

- snmp trap link-status

- snmp trap link-status

- snmp trap link-status

- snmp trap link-status

- snsr-grp sample-interval

- sockets local-port-range

- soft-reconfiguration inbound

- soft-reconfiguration inbound

- soo auto

- sort

- source-group

- source-interface

- source-interface

- source-interface

- source-interface hold-down-time

- source

- source

- source

- source

- source copy-sys

- source forward-drops

- source interface

- source interface

- source ip

- source proxy-layer2-gateway tree-id switchid tx

- source vlan

- spanning-tree bpdufilter

- spanning-tree bpduguard

- spanning-tree bridge-domain

- spanning-tree bridge assurance

- spanning-tree cost

- spanning-tree cost auto

- spanning-tree domain

- spanning-tree domain clear statistics

- spanning-tree fcoe

- spanning-tree guard

- spanning-tree lc-issu

- spanning-tree lc-issu

- spanning-tree link-type

- spanning-tree loopguard default

- spanning-tree mode

- spanning-tree mst configuration

- spanning-tree mst configuration

- spanning-tree mst cost

- spanning-tree mst cost auto

- spanning-tree mst forward-time

- spanning-tree mst hello-time

- spanning-tree mst max-age

- spanning-tree mst max-hops

- spanning-tree mst port-priority

- spanning-tree mst pre-standard

- spanning-tree mst priority

- spanning-tree mst root

- spanning-tree mst simulate pvst

- spanning-tree mst simulate pvst global

- spanning-tree pathcost method

- spanning-tree port-priority

- spanning-tree port type

- spanning-tree port type edge bpdufilter default

- spanning-tree port type edge bpduguard default

- spanning-tree port type edge default

- spanning-tree port type edge trunk

- spanning-tree port type network default

- spanning-tree portfast

- spanning-tree portfast bpdufilter default

- spanning-tree portfast bpduguard default

- spanning-tree portfast default

- spanning-tree pseudo-information

- spanning-tree vlan

- spanning-tree vlan forward-time

- spanning-tree vlan hello-time

- spanning-tree vlan max-age

- spanning-tree vlan priority

- spanning-tree vlan root

- speed-group

- speed

- speed

- speed

- speed

- speed

- speed

- speed

- speed

- speed auto

- speed auto 100

- speed auto 100 1000

- speed auto 100 1000

- speed auto 100

- speed auto

- spf-interval

- spf-interval

- spf-interval

- spf mode incremental

- spf mode incremental

- sport

- sprom backplane

- sprom recover backplane

- ssh

- ssh6

- ssh cipher-mode weak

- ssh key dsa

- ssh login-attempts

- ssh server enable

- staggered adjacency-bringup

- staggered adjacency-count

- standby

- standby

- start

- start

- start

- start

- start

- start

- start

- state

- state enabled

- stateful-ha

- stateful-ha

- statistics

- statistics

- statistics

- statistics per-entry

- statistics per-entry

- statistics per-entry

- stats-reporting-period

- status

- status

- status

- status

- status

- status

- status

- sticky root-selection

- stopbits 1

- stopbits 1

- storm-control-cpu

- storm-control

- stp-root

- streetaddress

- stub

- subscription

- summary-address

- summary-address

- summary-address

- summary-address

- suppress-arp

- suppress-fib-pending

- suppress-fib-pending

- suppress-inactive

- suppress-inactive

- suppress-signaling-protocol ldp

- suppress mac-route

- switch-id

- switch-priority

- switch-priority

- switch-profile

- switch-profile

- switch-scope controller

- switchback

- switching-mode fabric-speed 40g

- switching-mode store-forward

- switchport

- switchport

- switchport access vlan

- switchport access vlan

- switchport access vlan

- switchport autostate exclude

- switchport block unicast

- switchport dot1q ethertype

- switchport dot1q ethertype

- switchport host

- switchport isolated

- switchport mac-learn disable

- switchport mode

- switchport mode

- switchport mode fabricpath

- switchport mode monitor buffer-limit

- switchport mode private-vlan

- switchport mode private-vlan trunk

- switchport monitor

- switchport port-security

- switchport port-security aging time

- switchport port-security aging type absolute

- switchport port-security mac-address

- switchport port-security mac-address sticky

- switchport port-security maximum

- switchport port-security violation

- switchport private-vlan association trunk

- switchport private-vlan host-association

- switchport private-vlan mapping

- switchport private-vlan mapping trunk

- switchport private-vlan trunk allowed vlan

- switchport private-vlan trunk native vlan

- switchport trunk allowed vlan

- switchport trunk native vlan

- switchport trunk pruning vlan except add remove none all

- switchport vlan mapping

- switchport vlan mapping all

- switchport vlan mapping all dot1q-tunnel

- switchport vlan mapping all dot1q-tunnel

- switchport vlan mapping dot1q-tunnel

- switchport vlan mapping dot1q-tunnel allowed-vlan

- switchport vlan mapping enable

- switchto vdc

- sync-peers destination

- sync-snmp-password

- sync-snmp-password

- sync-snmp-password

- syslog

- system-mac

- system-mac

- system-priority

- system

- system acl

- system auto-collect tech-support

- system cores

- system cores retain

- system default interface-vlan autostate

- system default interface

- system default switchport

- system default switchport fabricpath

- system default switchport shutdown

- system dme enable

- system dot1q-tunnel transit

- system fabric-mode full-rate

- system fabric core-vlans

- system fabric dynamic-vlans

- system fast-reload stabilization-timer

- system hap-reset

- system hap-reset

- system health check bootflash

- system heartbeat

- system heartbeat

- system high-multicast-priority

- system inband queuing

- system inband queuing

- system interface shutdown

- system jumbomtu

- system kernel-trace

- system kgdb

- system kgdb

- system login block-for

- system login block-for attempts within

- system login quiet-mode

- system login quiet-mode access-class

- system memory-thresholds minor severe critical

- system minlife

- system mode maintenance

- system mode maintenance always-use-custom-profile

- system mode maintenance on-reload reset-reason

- system mode maintenance snapshot-delay

- system mode maintenance timeout

- system module failure-action shutdown

- system mrouting performance-mode

- system nve allow-vxlan-native-vlan

- system nve drop-glean

- system nve ecmp-reuse

- system nve infra-vlans

- system nve infra-vlans force

- system nve ingress-replication round-robin

- system nve ipmc global index-size

- system nve mac-learn-disable

- system nve mac-nat-enable

- system nve peer-vni-counter

- system nve policy-install-all

- system offline

- system private-vlan fex trunk

- system pss shrink

- system qos

- system release mod-lock uuid nodeid

- system restart vdc service name

- system routing performance-mode

- system routing unknown-unicast-flood

- system shutdown fan-direction mismatch

- system standby manual-boot

- system standby manual-boot

- system standby reload vdc

- system startup-config init

- system startup-config kill config-update

- system startup-config unlock

- system statistics

- system statistics

- system switch-mode

- system switchover

- system switchover force

- system swover-timeout-reset

- system trace

- system urpf disable

- system vlan long-name

- system vlan nve-overlay id

- system vlan reserve

- system vrf-member-change retain-l3-config

- system watchdog

- system watchdog

- system watchdog kgdb

- system watchdog kgdb

sak-expiry-time

[no] sak-expiry-time <ts>

Syntax Description

sak-expiry-time

Time in seconds to force SAK rekey

ts

time in seconds

Command Mode

- /exec/configure/macsec-policy

sampler

[no] sampler <samplername>

Syntax Description

sampler

Define a Sampler

samplername

Name of sampler

Command Mode

- /exec/configure

sampling

sampling <sampling_range> | no sampling

Syntax Description

no

Negate a command or set its defaults

sampling

Set the sampling range for SPAN packets

sampling_range

Sampling range: N = every Nth packet will be spanned

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

sap hash-algorithm HMAC-SHA-1

{ [ no ] sap hash-algorithm HMAC-SHA-1 } | { sap hash-algorithm HMAC-MD5 }

Syntax Description

sap

Specify preferred SAP negotiation parameters

hash-algorithm

Hashing Algorithm to use during SAP protocol

HMAC-SHA-1

use HMAC-SHA-1 for hashing (default is HMAC-MD5)

HMAC-MD5

use HMAC-MD5 for hashing

Command Mode

- /exec/configure/cts-dot1x /exec/configure/cts-manual

sap modelist

[no] sap modelist <mode_opt>

Syntax Description

sap

Specify preferred SAP negotiation parameters

modelist

encryption mode

mode_opt

modelist options

Command Mode

- /exec/configure/cts-dot1x

sap pmk sap pmk use-dot1x

sap pmk <pmk> [ left-zero-padded ] [ modelist <mode_opt> ] | sap pmk use-dot1x [ modelist <mode_opt> ] | no sap

Syntax Description

sap

Specify preferred SAP negotiation parameters

pmk

pairwise master key

pmk

32 byte value specified as a string

left-zero-padded

(Optional) Pad with zeros on the left if PMK length is less than 32 bytes

modelist

(Optional) encryption mode

mode_opt

(Optional) modelist options

modelist

(Optional) <mode_opt>

use-dot1x

Use pmk generated after dot1x authentication. Use dot1x commands to configure dot1x on this port

Command Mode

- /exec/configure/cts-manual

save

save <uri0>

Syntax Description

save

Save the current configuration session to uri

uri0

Enter the complete uri where the session is to be stored

Command Mode

- /exec/configure

scale-factor module

[no] scale-factor <sf-value> module <module-number>

Syntax Description

no

(Optional) Negate a command or set its defaults

scale-factor

Scale factor

sf-value

Specify scale factor value from 0.10 to 2.00

module

Module

module-number

specify module number

Command Mode

- /exec/configure/ctrl-plane

scheduler aaa-authentication

{ scheduler aaa-authentication { password { 0 <s0> | 7 <s1> | <s2> } | username <s3> password { 01 <s4> | 71 <s5> | <s6> } } | no scheduler aaa-authentication { password [ { 0 <s0> | 7 <s1> | <s2> } ] | username <s3> password [ { 01 <s4> | 71 <s5> | <s6> } ] } }

Syntax Description

no

Negate a command or set its defaults

scheduler

Config commands for scheduler

aaa-authentication

Password for AAA authentication(of logged in user)

password

Specify the password of logged in user(for AAA authentication)

0

Password (clear text) of logged in user

s0

password (clear text) of logged in user

7

Encrypted password of logged in user

s1

Encrypted password (for AAA authentication)

s2

Password (clear text) of logged in user

username

logged in user name

s3

user name (for AAA authentication)

password

Specify the password of logged in user(for AAA authentication)

01

Password (clear text) of logged in user

s4

password (clear text) of logged in user

71

Encrypted password of logged in user

s5

Encrypted password (for AAA authentication)

s6

Password (clear text) of logged in user

Command Mode

- /exec/configure

scheduler enable

[no] scheduler enable

Syntax Description

no

(Optional) Negate a command or set its defaults

scheduler

Config commands for scheduler

enable

Command to enable/disable features

Command Mode

- /exec/configure

scheduler job name

[no] scheduler job name <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

scheduler

Config commands for scheduler

job

Define a job

name

Specify a name for the job

s0

Name of the job

Command Mode

- /exec/configure

scheduler logfile size

{ scheduler logfile size <i0> | no scheduler logfile size [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

scheduler

Config commands for scheduler

logfile

Scheduler log file configuration

size

Specify the log file size

i0

Size of the file in KB

Command Mode

- /exec/configure

scheduler schedule name

[no] scheduler schedule name <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

scheduler

Config commands for scheduler

schedule

Define a schedule

name

Specify a name for the schedule

s0

Name of the schedule

Command Mode

- /exec/configure

scheduler transport email

{ scheduler transport email { from <s0> | reply-to <s1> | smtp-server <host0> [ port <i1> ] } | no scheduler transport email { from | reply-to | smtp-server } }

Syntax Description

no

Negate a command or set its defaults

scheduler

Config commands for scheduler

transport

Configure transport related configuration

email

Configure email transport related configuration

from

Configure from email address

s0

Provide from email address, example: SJ-9500-1@xyz.com

reply-to

Configure replyto email address

s1

Provide reply-to email address, example: admin@xyz.com

smtp-server

Configure SMTP server address

host0

SMTP server(DNS name or IPv4 or IPv6 address)

port

(Optional) Configure SMTP server port (default:25)

i1

(Optional) SMTP server port

Command Mode

- /exec/configure

scp

scp [ <recurse> ] <from> [ <hyphen> ] <src-path>

Syntax Description

scp

Launch scp subsystem

recurse

(Optional) -r recurse

from

-f scp from

hyphen

(Optional) --

src-path

from URL

Command Mode

- /exec

scp

scp [ <recurse> ] [ <directory> ] [ <verbose> ] <to> [ <hyphen> ] <dst-path>

Syntax Description

scp

Launch scp subsystem

recurse

(Optional) -r recurse

directory

(Optional) -d directory

verbose

(Optional) -v verbose

to

-t scp to

hyphen

(Optional) --

dst-path

to URL

Command Mode

- /exec

scripting tcl init

scripting tcl init <uri0> | no scripting tcl init

Syntax Description

no

Negate a command or set its defaults

scripting

Configure scripting parameters

tcl

Specify scripting parameter for tcl

init

Specify init parameters

uri0

Tcl init script name

Command Mode

- /exec

scripting tcl recursion-limit

scripting tcl recursion-limit <limit> | no scripting tcl recursion-limit

Syntax Description

no

Negate a command or set its defaults

scripting

Configure scripting parameters

tcl

Specify scripting parameter for tcl

recursion-limit

Specify recursion-limit

limit

Specify limit

Command Mode

- /exec

search

search <failure_desc>

Syntax Description

search

Search for information

failure_desc

Brief problem description

Command Mode

- /exec

section

| section <pattern>

Syntax Description

|

Pipe command output to filter

section

show lines that include the pattern as well as the subsequent lines that are more indented than matching line

pattern

the pattern (regular expression) to match

Command Mode

- /output

secure-handoff

{ [ no ] secure-handoff }

Syntax Description

no

(Optional) Negate a command or set its defaults

secure-handoff

Confirm dynamic-eid discovery by probing for remote host

Command Mode

- /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

security-policy

[no] security-policy <policy>

Syntax Description

security-policy

Configure Security policy

policy

Security Policy options

Command Mode

- /exec/configure/macsec-policy

sed

| sed [ -n ] + <expr>

Syntax Description

|

Pipe command output to filter

sed

Stream Editor

-n

(Optional) suppress automatic printing of pattern space

expr

Edition command (script)

Command Mode

- /output

segment-routing mpls

[no] segment-routing mpls

Syntax Description

no

(Optional) Negate a command or set its defaults

segment-routing

segment-routing properties

mpls

MPLS configuration commands

Command Mode

- /exec/configure

send-community

[ no | default ] send-community [ both | extended | standard ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

send-community

Send Community attribute to this neighbor

both

(Optional) Send Standard and Extended Community attributes

extended

(Optional) Send Extended Community attribute

standard

(Optional) Send Standard Community attribute

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

send-community

[ no | default ] send-community [ both | standard ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

send-community

Send Community attribute to this neighbor

both

(Optional) Send Standard and Extended Community attributes

standard

(Optional) Send Standard Community attribute

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

send-community extended

[ no | default ] send-community extended

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

send-community

Send Community attribute to this neighbor

extended

Send Extended Community attribute

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

send-lifetime month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l duration infinite month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l

{ { send-lifetime [ local ] <stime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <sday> <syear> { duration <dsec> | infinite | <etime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <eday> <eyear> } } | { no send-lifetime [ [ local ] <stime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <sday> <syear> { duration <dsec> | infinite | <etime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <eday> <eyear> } ] } }

Syntax Description

no

Negate a command or set its defaults

send-lifetime

Set send lifetime of key

local

(Optional) Specify time in local timezone

stime

HH:MM:SS Time to start <0-23>:<0-59>:<0-59>

etime

HH:MM:SS Time to end <0-23>:<0-59>:<0-59>

month_a

month_b

month_c

month_d

month_e

month_f

month_g

month_h

month_i

month_j

month_k

month_l

sday

Day of the month to start

eday

Day of the month to end

syear

Year to start

eyear

Year to end

duration

Set key lifetime duration

dsec

Duration in seconds

infinite

Never Expires

Command Mode

- /exec/configure/keychain-key

send-lifetime month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l duration infinite month_a month_b month_c month_d month_e month_f month_g month_h month_i month_j month_k month_l

{ { send-lifetime [ local ] <stime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <sday> <syear> { duration <dsec> | infinite | <etime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <eday> <eyear> } } | { no send-lifetime [ [ local ] <stime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <sday> <syear> { duration <dsec> | infinite | <etime> { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } <eday> <eyear> } ] } }

Syntax Description

no

Negate a command or set its defaults

send-lifetime

Set send lifetime of macsec key

local

(Optional) Specify time in local timezone

stime

HH:MM:SS Time to start <0-23>:<0-59>:<0-59>

etime

HH:MM:SS Time to end <0-23>:<0-59>:<0-59>

month_a

month_b

month_c

month_d

month_e

month_f

month_g

month_h

month_i

month_j

month_k

month_l

sday

Day of the month to start

eday

Day of the month to end

syear

Year to start

eyear

Year to end

duration

Set key lifetime duration

dsec

Duration in seconds

infinite

Never Expires

Command Mode

- /exec/configure/macseckeychain-key

send

send <line>

Syntax Description

send

Send message to open sessions

line

Send message (a line) to all open sessions

Command Mode

- /exec

send session

send session <s0> <line>

Syntax Description

send

Send message to open sessions

session

Send message to specific session

s0

Specify pts/tty device type

line

Enter a one line message

Command Mode

- /exec

sensor-group

[no] sensor-group <sgrp-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

sensor-group

Create a sensor group

sgrp-id

Identifier

Command Mode

- /exec/configure/telemetry

serial

serial <chas-ser> | no serial

Syntax Description

no

Negate the command

serial

Chassis serial number

chas-ser

Serial number

Command Mode

- /exec/configure/fex

server

[no] server <host0>

Syntax Description

no

(Optional) Negate a command or set its defaults

server

LDAP server name

host0

LDAP server name

Command Mode

- /exec/configure/ldap

server

[no] server { <hostipname> }

Syntax Description

no

(Optional) Negate a command or set its defaults

server

TACACS+ server name or IP address

hostipname

IPV4/IPV6 address or DNS name

Command Mode

- /exec/configure/tacacs+

server

[no] server <hostipname>

Syntax Description

no

(Optional) Negate a command or set its defaults

server

RADIUS server name or IP address

hostipname

IPV4/IPV6 address or DNS name

Command Mode

- /exec/configure/radius

server protocol ldap

[no] server protocol ldap { ipv6 <ipv6addr> | ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ enable-ssl ]

Syntax Description

no

(Optional) Negate a command or set its defaults

server

Configure database server

protocol

Configure database protocol

ldap

Use LDAP

ipv6

IPv6 address of server

ip

IP address of server

ipaddr

Enter IP address of server

host

Hostname of server

hostname

Enter hostname of server

port

(Optional) Port

portnum

(Optional) Enter port number

vrf

(Optional) vrf context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

enable-ssl

(Optional) LDAP server enable ssl

Command Mode

- /exec/configure/fabric-db

server protocol radius group

[no] server protocol radius group <groupname>

Syntax Description

no

(Optional) Negate a command or set its defaults

server

Configure database server

protocol

Configure database protocol

radius

Use RADIUS

group

AAA group

groupname

Enter AAA group name of servers

Command Mode

- /exec/configure/fabric-db

server protocol xmpp ip

[no] server protocol xmpp { ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

server

Configure database server

protocol

Configure database protocol

xmpp

Use XMPP

ip

IP address of server

ipaddr

Enter IP address of server

host

Hostname of server

hostname

Enter hostname of server

port

(Optional) Port

portnum

(Optional) Enter port number

vrf

(Optional) vrf context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec/configure/fabric-db

service-policy

[no] service-policy [ type qos ] <inp-or-out> <pmap-name-qos> [ no-stats ]

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Configure service policy for an interface

type

(Optional) Specify the type of this policy

qos

(Optional) Qos policy

inp-or-out

pmap-name-qos

Policy-map name __nil__ You must create a policy-map before using this command

no-stats

(Optional) Disable statistics for this policy

Command Mode

- /exec/configure/if-set-qos /exec/configure/if-remote-ethernet /exec/configure/if-remote-ethernet-switch

service-policy

[no] service-policy [ type qos ] <inp-or-out> <pmap-name-qos> [ no-stats ]

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Configure service policy for an interface

type

(Optional) Specify the type of this policy

qos

(Optional) Qos policy

inp-or-out

pmap-name-qos

Policy-map name __nil__ You must create a policy-map before using this command

no-stats

(Optional) Disable statistics for this policy

Command Mode

- /exec/configure/vlan

service-policy

[no] service-policy [ type qos ] <pmap-name-qos>

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Configure hierarchial policy-map

type

(Optional) Specify the type of this policy

qos

(Optional) Qos policy

pmap-name-qos

Policy-map name

Command Mode

- /exec/configure/policy-map/class

service-policy input

[no] service-policy input <policy_name>

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Attach a policy to control-plane interface

input

Input the policy name

policy_name

Name of the policy

Command Mode

- /exec/configure/ctrl-plane

service-policy type network-qos

[no] service-policy type network-qos <pmap-name-nq>

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Policy Map

type

Specify the type of this policy-map

network-qos

Network QoS policy

pmap-name-nq

Policy-map name

Command Mode

- /exec/configure/system/qos

service-policy type psp

[no] service-policy type psp <inp-or-out> { <pmap-name-plc> | { handle <ppf_id> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Configure service policy for an interface

type

Specify the type of this policy

psp

PSP policy

inp-or-out

pmap-name-plc

Policy-map name __nil__ You must create a policy-map before using this command

handle

Handle

ppf_id

PPF ID

Command Mode

- /exec/configure/if-set-qos

service-policy type qos

[no] service-policy type qos <inp-only> <pmap-name-qos>

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Policy Map

type

Specify the type of this policy-map

qos

System-level QoS policy

inp-only

pmap-name-qos

Policy-map name __nil__ You must create a policy-map before using this command

Command Mode

- /exec/configure/system/qos

service-policy type queuing

[no] service-policy type queuing <inp-or-out> <pmap-name-que>

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Policy Map

type

Specify the type of this policy-map

queuing

DCE Queuing policy

inp-or-out

pmap-name-que

Policy-map name

Command Mode

- /exec/configure/system/qos

service-policy type queuing

[no] service-policy type queuing <inp-or-out> <pmap-name-que> [ no-stats ]

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Configure service policy for an interface

type

Specify the type of this policy

queuing

Queuing policy

inp-or-out

pmap-name-que

Policy-map name

no-stats

(Optional) Disable statistics for this policy

Command Mode

- /exec/configure/if-set-que

service-policy type queuing

[no] service-policy type queuing <pmap-name-que>

Syntax Description

no

(Optional) Negate a command or set its defaults

service-policy

Set the inner policy-map

type

Specify the type of this policy

queuing

Queuing policy

pmap-name-que

Policy-map name __nil__ You must create a policy-map before using this command

Command Mode

- /exec/configure/policy-map/type/queuing/class

service dhcp

[no] service dhcp

Syntax Description

no

(Optional) Negate a command or set its defaults

service

Modify use of network based services

dhcp

Enable DHCP relay agent

Command Mode

- /exec/configure

service set

[no] service set <onep-service-set>

Syntax Description

no

(Optional) Negate a command or set its defaults

service

ONEP service set

set

ONEP service set

onep-service-set

service name

Command Mode

- /exec/configure/onep

service tag

{ service tag <tag-id> } | { no service tag }

Syntax Description

no

Negate a command or set its defaults

service

Configure ngoam service

tag

Configure ngoam service tag

tag-id

Configure ngoam service tag id

Command Mode

- /exec/configure/configngoamprofile

service unsupported-transceiver

[no] service unsupported-transceiver

Syntax Description

no

(Optional) Negate a command or set its defaults

service

Serviceability Commands

unsupported-transceiver

Configure support for transceivers not supported by Cisco

Command Mode

- /exec/configure

session-limit

[no] session-limit <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

session-limit

Set the max no of concurrent vsh sessions

i0

Max concurrent vsh sessions

Command Mode

- /exec/configure/line

session domain-lookup

session domain-lookup | no session domain-lookup

Syntax Description

session

Configure session preferences

no

Negate a command or set its defaults

domain-lookup

Session

Command Mode

- /exec

session key-required

[no] session key-required

Syntax Description

no

Negate a command or set its defaults

session

One Platform session

key-required

Disable session key

Command Mode

- /exec/configure/onep

session max

[no] session max [ <onep-maxsess> ]

Syntax Description

no

Negate a command or set its defaults

session

One Platform session

max

Maximum number of sessions

onep-maxsess

(Optional) Number of sessions

Command Mode

- /exec/configure/onep

session max

session max <onep-maxsess>

Syntax Description

session

One Platform session

max

Maximum number of sessions

onep-maxsess

Number of sessions

Command Mode

- /exec/configure/onep

session protection

[no] session protection [ vrf { <vrf-name> | <vrf-known-name> } ] [ for <pfx-list> ] [ duration { <secs> | infinite } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

session

Configure session parameters

protection

Configure session protection parameters

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

for

(Optional) Prefix list to specify LDP peers

pfx-list

(Optional) Prefix list for LDP peers

duration

(Optional) Period to sustain session protection after loss of link discovery

secs

(Optional) Holdup time in seconds

infinite

(Optional) Protect session forever after loss of link discovery

Command Mode

- /exec/configure/ldp

set-attached-bit

[no] set-attached-bit

Syntax Description

no

(Optional) Negate a command or set its defaults

set-attached-bit

Configure L1|L2 router to set/unset attached bit in its L1 LSP

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv6

set-overload-bit

{ no set-overload-bit | [ no ] set-overload-bit { always | on-startup { <secs> | <seconds> } } }

Syntax Description

no

Negate a command or set its defaults

set-overload-bit

Signal other routers not to use us for transit

always

Set the overload bit unconditionally

on-startup

Set the overload bit on IS-IS startup

secs

Clear the overload bit after an elapsed time in seconds

seconds

Clear the overload bit after an elapsed time in seconds

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

set-overload-bit

[no] set-overload-bit | [ no ] set-overload-bit { always | on-startup { <secs> | [ <seconds> ] wait-for bgp <as> } } [ suppress { [ interlevel ] [ external ] } ]

Syntax Description

no

Negate a command or set its defaults

set-overload-bit

Signal other routers not to use us for transit

always

Set the overload bit unconditionally

on-startup

Set the overload bit on IS-IS startup

secs

Clear the overload bit after an elapsed time in seconds

wait-for

Clear the overload bit when notified by a specific protocol

bgp

Border Gateway Protocol (BGP)

seconds

(Optional) Clear the overload bit after an elapsed time in seconds

as

Autonomous system number

suppress

(Optional) Suppress route redistribution if overload bit set

interlevel

(Optional) Suppress interlevel route redistribution

external

(Optional) Suppress external route redistribution

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

set

[no] set { { cos <cos-val> } | { eth-src-mac-addr <src-mac-addr> } | { eth-dest-mac-addr <dest-mac-addr> } | { vlan <vlan-number> } | { ip-tos <ip-tos-value> <ip-tos-mask> } | { out-interface <iface-list> } | { dscp [ tunnel ] { <dscp-val> | <dscp-enum> } } | { precedence [ prec-tunnel ] { <prec-val> | <prec-enum> } } | { discard-class <dis-class-val> } | { qos-group <qos-grp-val> } | { { { cos1 cos2 } | { dscp1 dscp2 } | { prec1 prec2 } | { dis-class1 dis-class2 } | { dscp3 mpls-exp-imposition } | { mpls-exp-topmost dscp4 } | { mpls-exp-topmost1 mpls-exp-topmost2 } } } | { mpls experimental { { topmost <exp-value> } | { imposition <exp-value-imp> } } } | action-strip-vlan | action-drop-pkt | divert-action | copy-action | action-decrement-ttl | forward-normal | goto-pmap <pmap-table-handle> }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set attribute

cos

IEEE 802.1Q class of service

cos1

IEEE 802.1Q class of service

cos2

IEEE 802.1Q class of service

cos-val

802.1Q Class of Service value

eth-dest-mac-addr

Action on Layer 2 destination MAC address

eth-src-mac-addr

Action on Layer 2 source MAC address

src-mac-addr

Layer 2 MAC Address

dest-mac-addr

Layer 2 MAC Address

vlan

Set the VLAN ID

vlan-number

VLAN NUMBER

ip-tos

Set the IPv4 TOS

ip-tos-value

IPv4 TOS Value

ip-tos-mask

IPV4 TOS Mask

out-interface

Output to a Specified Interface

iface-list

Physical Interface Name and Number or List

action-strip-vlan

Perform the action STRIP-VLAN-ID

action-drop-pkt

Perform the action Drop the Packet

divert-action

Divert the packets to Controller

copy-action

Copy the packets to Controller

action-decrement-ttl

Decrement TTL on the Packet

forward-normal

Forward the packets normally

goto-pmap

Goto pmap/table

pmap-table-handle

Pmap-table handle

dscp

DSCP in IP(v4) and IPv6 packets

dscp1

DSCP in IP(v4) and IPv6 packets

dscp2

DSCP in IP(v4) and IPv6 packets

tunnel

(Optional) Set DSCP in tunnel encapsulation

dscp-val

DSCP value

dscp-enum

precedence

Precedence in IP(v4) and IPv6 packets

prec1

Precedence in IP(v4) and IPv6 packets

prec2

Precedence in IP(v4) and IPv6 packets

prec-tunnel

(Optional) Set Precedence in tunnel encapsulation

prec-val

IP Precedence value

prec-enum

discard-class

Discard class

dis-class1

Discard class

dis-class2

Discard class

dis-class-val

Discard class value

qos-group

Qos-group

qos-grp-val

Qos-group value

mpls

Set MPLS label

experimental

Set MPLS experimental label

topmost

Set MPLS topmost label

imposition

Push the label and set new one on top

exp-value

MPLS value

exp-value-imp

MPLS value

dscp3

DSCP in IP(v4) and IPv6 packets

mpls-exp-imposition

mpls-exp-imposition

mpls-exp-topmost

mpls-exp-topmost

dscp4

DSCP in IP(v4) and IPv6 packets

mpls-exp-topmost1

mpls-exp-topmost

mpls-exp-topmost2

mpls-exp-topmost

Command Mode

- /exec/configure/policy-map/type/plc/class

set

[no] set { { dlb-disable } | { precedence [ prec-tunnel ] { <prec-val> | <prec-enum> } } | { dscp [ tunnel ] { <dscp-val> | <dscp-enum> } } | { cos <cos-val> } | { qos-group <qos-grp-val> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set attribute

dlb-disable

Disable Dynamic Load Balancing

precedence

Precedence in IP(v4) and IPv6 packets

prec-tunnel

(Optional) Set Precedence in tunnel encapsulation

prec-val

IP Precedence value

prec-enum

dscp

DSCP in IP(v4) and IPv6 packets

tunnel

(Optional) Set DSCP in tunnel encapsulation

dscp-val

DSCP value

dscp-enum

cos

IEEE 802.1Q Class of Service

cos-val

802.1Q Class of Service value

qos-group

Qos-group

qos-grp-val

Qos-group value

Command Mode

- /exec/configure/policy-map/class

set

[no] set { { discard-class <dis-class-val> } | { { { cos1 cos2 } | { dscp1 dscp2 } | { prec1 prec2 } | { dis-class1 dis-class2 } | { dscp3 mpls-exp-imposition } | { mpls-exp-topmost dscp4 } | { mpls-exp-topmost1 mpls-exp-topmost2 } } table <table-map-name> } | { mpls experimental { { topmost <exp-value> } | { imposition <exp-value-imp> } } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set attribute

cos1

IEEE 802.1Q Class of Service

cos2

IEEE 802.1Q Class of Service

dscp1

DSCP in IP(v4) and IPv6 packets

dscp2

DSCP in IP(v4) and IPv6 packets

prec1

Precedence in IP(v4) and IPv6 packets

prec2

Precedence in IP(v4) and IPv6 packets

discard-class

Discard class

dis-class1

Discard class

dis-class2

Discard class

dis-class-val

Discard class value

table

Table defining mapping from input to output

table-map-name

Table-map name

mpls

Set MPLS label

experimental

Set MPLS experimental label

topmost

Set MPLS topmost label

imposition

Push the label and set new one on top

exp-value

MPLS value

exp-value-imp

MPLS value

dscp3

DSCP in IP(v4) and IPv6 packets

mpls-exp-imposition

mpls-exp-imposition

mpls-exp-topmost

mpls-exp-topmost

dscp4

DSCP in IP(v4) and IPv6 packets

mpls-exp-topmost1

mpls-exp-topmost

mpls-exp-topmost2

mpls-exp-topmost

Command Mode

- /exec/configure/policy-map/class

set

set <paramname> <paramval>

Syntax Description

set

Set the parameter value

paramname

Enter the name of the parameter

paramval

Enter the parameter value

Command Mode

- /exec/configure/param-inst

set

[no] set { load-sharing per-packet }

Syntax Description

set

Set attribute

load-sharing

Load sharing across ECMP by set out-of-order bit

per-packet

per MiM packet

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/policy-map/class

set

[no] set { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] { <dscp-val> | <opt_set_dscp> } } | { precedence [ tunnel1 ] { <prec-val> | <opt_set_prec> } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set attribute

cos

IEEE 802.1Q class of service

inner

(Optional) Set inner 802.1Q class of service in QinQ environment

cos-val

802.1Q Class of Service value

dscp

DSCP in IP(v4) and IPv6 packets

tunnel

(Optional) Set DSCP in tunnel encapsulation

dscp-val

DSCP value

opt_set_dscp

precedence

Precedence in IP(v4) and IPv6 packets

tunnel1

(Optional) Set DSCP in tunnel encapsulation

prec-val

IP Precedence value

opt_set_prec

Command Mode

- /exec/configure/pmap/class

set as-path prepend last-as tag

{ set as-path { prepend { last-as <lastas> | <as> + } | tag } } | { no set as-path { prepend [ last-as [ <lastas> ] | <as> + ] | tag } }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

as-path

Prepend string for a BGP AS-path attribute

prepend

Prepend to the AS-Path

last-as

Prepend last AS to the as-path

lastas

number of last-AS prepends

as

AS number

tag

Set the tag as an AS-path attribute

as

(Optional)

Command Mode

- /exec/configure/route-map

set comm-list delete

{ { set comm-list <name> delete } | { no set comm-list } }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

comm-list

set BGP community list (for deletion)

name

Community list name

delete

Delete matching communities

Command Mode

- /exec/configure/route-map

set community none additive internet local-AS

{ set community { none | { additive | internet | local-AS | no-advertise | no-export | <hex_num> | <number> | <community> } + } } | { no set community [ { none | { additive | internet | local-AS | no-advertise | no-export | <hex_num> | <number> | <community> } + } ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

community

Set BGP community attribute

additive

Add to existing community

internet

Internet (well-known community)

local-AS

Do not send outside local AS (well-known community)

no-advertise

Do not advertise to any peer (well-known community)

no-export

Do not export to next AS (well-known community)

none

No community attribute

number

Community number

hex_num

Community number in hex

community

Community number aa:nn format

additive

(Optional) internet

Command Mode

- /exec/configure/route-map

set cos

[no] set cos <cos-val>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set attribute

cos

IEEE 802.1Q class of service

cos-val

802.1Q Class of Service value

Command Mode

- /exec/configure/policy-map/type/uf/class

set cos

[no] set cos <cos-val>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set attribute

cos

IEEE 802.1Q Class of Service

cos-val

802.1Q Class of Service value

Command Mode

- /exec/configure/policy-map/type/queuing/class

set dampening

{ set dampening <halflife> <reuse> <supress> <duration> } | { no set dampening [ <halflife> <reuse> <supress> <duration> ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

dampening

Set BGP route flap dampening parameters

halflife

half-life time for the penalty

reuse

penalty to start reusing a route

supress

penalty to start suppressing a route

duration

Maximum duration to suppress a stable route

Command Mode

- /exec/configure/route-map

set distance

{ set distance <external-dist> [ <internal-dist> [ <local-dist> ] ] } | { no set distance }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

distance

Set the Administrative distance of route

external-dist

Administrative distance for IGP or EBGP routes

internal-dist

(Optional) Administrative distance for internal routes

local-dist

(Optional) Administrative distance for local routes

Command Mode

- /exec/configure/route-map

set extcomm-list delete

{ { set extcomm-list <name> delete } | { no set extcomm-list [ <name> delete ] } }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

extcomm-list

set BGP extcommunity list (for deletion)

name

Extended Community list name

delete

Delete matching extcommunities

Command Mode

- /exec/configure/route-map

set extcommunity 4byteas-generic transitive additive

{ set extcommunity 4byteas-generic { { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } + [ additive ] | additive | none } } | { no set extcommunity 4byteas-generic [ { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } + [ additive ] | additive | none ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

extcommunity

Set BGP extcommunity attribute

4byteas-generic

Generic extended community

additive

(Optional) Add to existing generic extcommunity

none

No extcommunity generic attribute

transitive

Transitive extended community

non-transitive

Non-Transitive extended community

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

ext-comm-gen-trans

(Optional) <ext-comm-gen-nontrans>

Command Mode

- /exec/configure/route-map

set extcommunity additive

{ set extcommunity { additive | none } } | { no set extcommunity [ additive | none ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

extcommunity

Set BGP extcommunity attribute

additive

Add to existing generic extcommunity

none

No extcommunity attribute

Command Mode

- /exec/configure/route-map

set extcommunity cost

{ set extcommunity cost { [ igp | pre-bestpath ] <comm-id> <cost-value> } + } | { no set extcommunity cost [ [ igp | pre-bestpath ] <comm-id> <cost-value> ] + }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

extcommunity

Set BGP extcommunity attribute

cost

Cost

igp

(Optional) Compare following IGP cost comparison

pre-bestpath

(Optional) Compare before all other steps in bestpath calculation

comm-id

Community ID

cost-value

Cost Community value

comm-id

(Optional) <cost-value>

Command Mode

- /exec/configure/route-map

set extcommunity rt additive

{ set extcommunity rt { { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } + [ additive ] | additive } } | { no set extcommunity rt [ { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } + [ additive ] | additive ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

extcommunity

Set BGP extcommunity attribute

rt

Route-Target

additive

(Optional) Add to existing rt extcommunity

ext-comm-rt-aa2nn4

Extcommunity number

ext-comm-rt-aa4nn2

Extcommunity number

ext-comm-rt-aa2nn4

(Optional) <ext-comm-rt-aa4nn2>

Command Mode

- /exec/configure/route-map

set extension-key

[no] set extension-key <key>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set the extension key manually

extension-key

Set the extension key manually

key

Extension key

Command Mode

- /exec/configure/vmt-conn

set forwarding-address

[no] set forwarding-address

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

forwarding-address

Set the forwarding address

Command Mode

- /exec/configure/route-map

set inner ipv4

set { inner | outer } ipv4 [ { l3-type <l3_type> | pyld-len <pyld_len> | v6-vld <v6_vld> | version <ver> | header-len <hlen> | dscp <dscp_val> | ecn <ecn_val> | packet-len <pkt_len> | more-frags <mf> | fragment-off <fragoff> | ttl <ttl_val> | next-protocol <nproto> | checksum <csum> | src_ip <sip> | dst_ip <dip> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

outer

Mask and Match By Outer Packet Fields

ipv4

IPv4 Fields

l3-type

(Optional) L3 Packet Type

l3_type

(Optional) L3 Packet Type

pyld-len

(Optional) Payload Length

pyld_len

(Optional) Payload Length

v6-vld

(Optional) IPv6 Valid Information

v6_vld

(Optional) IPv6 Valid Information

version

(Optional) Version

ver

(Optional) Version

header-len

(Optional) Header Length

hlen

(Optional) Header Length

dscp

(Optional) Diff. Serv. Code Point

dscp_val

(Optional) Diff. Serv. Code Point

ecn

(Optional) Explicit Congestion Ntfn

ecn_val

(Optional) Explicit Congestion Ntfn

packet-len

(Optional) Packet Total Length

pkt_len

(Optional) Packet Total Length

more-frags

(Optional) More Fragments Available

mf

(Optional) More Fragments Available

fragment-off

(Optional) Fragments Offset

fragoff

(Optional) Fragments Offset

ttl

(Optional) Time to Live

ttl_val

(Optional) Time to Live

next-protocol

(Optional) Next(L4) Protocol

nproto

(Optional) Next(L4) Protocol

checksum

(Optional) Checksum

csum

(Optional) Checksum

src_ip

(Optional) Source IP Address

sip

(Optional) Source IP Address

dst_ip

(Optional) Destination IP Address

dip

(Optional) Destination IP Address

Command Mode

- /exec/elamns/sel6

set inner ipv4

set inner ipv4 [ { l3-type <l3_type> | pyld-len <pyld_len> | v6-vld <v6_vld> | version <ver> | header-len <hlen> | dscp <dscp_val> | ecn <ecn_val> | packet-len <pkt_len> | more-frags <mf> | fragment-off <fragoff> | ttl <ttl_val> | next-protocol <nproto> | checksum <csum> | src_ip <sip> | dst_ip <dip> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

ipv4

IPv4 Fields

l3-type

(Optional) L3 Packet Type

l3_type

(Optional) L3 Packet Type

pyld-len

(Optional) Payload Length

pyld_len

(Optional) Payload Length

v6-vld

(Optional) IPv6 Valid Information

v6_vld

(Optional) IPv6 Valid Information

version

(Optional) Version

ver

(Optional) Version

header-len

(Optional) Header Length

hlen

(Optional) Header Length

dscp

(Optional) Diff. Serv. Code Point

dscp_val

(Optional) Diff. Serv. Code Point

ecn

(Optional) Explicit Congestion Ntfn

ecn_val

(Optional) Explicit Congestion Ntfn

packet-len

(Optional) Packet Total Length

pkt_len

(Optional) Packet Total Length

more-frags

(Optional) More Fragments Available

mf

(Optional) More Fragments Available

fragment-off

(Optional) Fragments Offset

fragoff

(Optional) Fragments Offset

ttl

(Optional) Time to Live

ttl_val

(Optional) Time to Live

next-protocol

(Optional) Next(L4) Protocol

nproto

(Optional) Next(L4) Protocol

checksum

(Optional) Checksum

csum

(Optional) Checksum

src_ip

(Optional) Source IP Address

sip

(Optional) Source IP Address

dst_ip

(Optional) Destination IP Address

dip

(Optional) Destination IP Address

Command Mode

- /exec/elamns/sel4

set inner l2

set { inner | outer } l2 [ { snap_vld <snap_vld> | cntag_vld <cntag_vld> | qtag_vld <qtag_vld> | vlan <vlan_id> | cos <cos_val> | cfi <cfi_vld> | vntag_vld <vntag_vld> | vntag_svif <vntag_svif> | vntag_dvif <vntag_dvif> | vntag_looped <vntag_loop> | vntag_pointer <vntag_p> | src_mac <smac> | dst_mac <dmac> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

outer

Mask and Match By Outer Packet Fields

l2

All Layer 2 Fields

snap_vld

(Optional) SNAP Header Information Valid

snap_vld

(Optional) SNAP Header Information Valid

cntag_vld

(Optional) CNTag Information Valid

cntag_vld

(Optional) CNTag Information Valid

qtag_vld

(Optional) VLAN Tag Information Valid

qtag_vld

(Optional) VLAN Tag Information Valid

vlan

(Optional) VLAN Id (Present only in case of FEX)

vlan_id

(Optional) VLAN Id

cos

(Optional) Class of Service

cos_val

(Optional) Class of Service Type

cfi

(Optional) CFI Setting

cfi_vld

(Optional) CFI Setting Valid

vntag_vld

(Optional) VNTAG Information Valid

vntag_vld

(Optional) VNTAG Information Valid

vntag_svif

(Optional) VNTAG Source vif

vntag_svif

(Optional) VNTAG Source vif

vntag_dvif

(Optional) VNTAG Destination vif

vntag_dvif

(Optional) VNTAG Destination vif

vntag_looped

(Optional) VNTAG Header Looped Valid

vntag_loop

(Optional) VNTAG Header Looped Valid

vntag_pointer

(Optional) VNTAG Header Pointer Valid

vntag_p

(Optional) VNTAG Header Pointer Valid

src_mac

(Optional) Source MAC Address

smac

(Optional) Source MAC Address Value

dst_mac

(Optional) Destination MAC Address

dmac

(Optional) Destination MAC Address Value

Command Mode

- /exec/elamns/sel5

set inner l2

set inner l2 [ { snap_vld <snap_vld> | cntag_vld <cntag_vld> | qtag_vld <qtag_vld> | vlan <vlan_id> | cos <cos_val> | cfi <cfi_vld> | vntag_vld <vntag_vld> | vntag_svif <vntag_svif> | vntag_dvif <vntag_dvif> | vntag_looped <vntag_loop> | vntag_pointer <vntag_p> | src_mac <smac> | dst_mac <dmac> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

l2

All Layer 2 Fields

snap_vld

(Optional) SNAP Header Information Valid

snap_vld

(Optional) SNAP Header Information Valid

cntag_vld

(Optional) CNTag Information Valid

cntag_vld

(Optional) CNTag Information Valid

qtag_vld

(Optional) VLAN Tag Information Valid

qtag_vld

(Optional) VLAN Tag Information Valid

vlan

(Optional) VLAN Id (Present only in case of FEX)

vlan_id

(Optional) VLAN Id

cos

(Optional) Class of Service

cos_val

(Optional) Class of Service Type

cfi

(Optional) CFI Setting

cfi_vld

(Optional) CFI Setting Valid

vntag_vld

(Optional) VNTAG Information Valid

vntag_vld

(Optional) VNTAG Information Valid

vntag_svif

(Optional) VNTAG Source vif

vntag_svif

(Optional) VNTAG Source vif

vntag_dvif

(Optional) VNTAG Destination vif

vntag_dvif

(Optional) VNTAG Destination vif

vntag_looped

(Optional) VNTAG Header Looped Valid

vntag_loop

(Optional) VNTAG Header Looped Valid

vntag_pointer

(Optional) VNTAG Header Pointer Valid

vntag_p

(Optional) VNTAG Header Pointer Valid

src_mac

(Optional) Source MAC Address

smac

(Optional) Source MAC Address Value

dst_mac

(Optional) Destination MAC Address

dmac

(Optional) Destination MAC Address Value

Command Mode

- /exec/elamns/sel4

set inner l2 hg2

set { inner | outer } l2 hg2 [ { hg2_vid <hg2_vlan> | hg2_ppd_type <hg2_ppd_type> | hg2_mirror <hg2_mirror> | hg2_opcode <hg2_opcode> | hg2_dstpid <hg2_dpid> | hg2_dstmod <hg2_dmod> | hg2_srcpid <hg2_spid> | hg2_srcmod <hg2_smod> | hg2_l3vld <hg2_l3_vld> | hg2_tc <hg2_tc> | hg2_dp <hg2_dp> | hg2_mcast <hg2_mcast_vld> | hg2-vld <hg2_vld> | hg2-cos <hg2_cos> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

outer

Mask and Match By Outer Packet Fields

l2

All Layer 2 Fields

hg2

High Gig2 Fields

hg2_vid

(Optional) High Gig2 VLAN Tag

hg2_vlan

(Optional) High Gig2 VLAN Tag Information

hg2_ppd_type

(Optional) High Gig2 Packet Processing Descriptor

hg2_ppd_type

(Optional) High Gig2 Packet Processing Descriptor

hg2_mirror

(Optional) High Gig2 Packet Mirror Information

hg2_mirror

(Optional) High Gig2 Packet Mirror Information

hg2_opcode

(Optional) High Gig2 Packet Type

hg2_opcode

(Optional) High Gig2 Packet Type

hg2_dstpid

(Optional) High Gig2 Destination Port ID

hg2_dpid

(Optional) High Gig2 Destination Port ID

hg2_dstmod

(Optional) High Gig2 Destination Module ID

hg2_dmod

(Optional) High Gig2 Destination Module ID

hg2_srcpid

(Optional) High Gig2 Source Port ID

hg2_spid

(Optional) High Gig2 Source Port ID

hg2_srcmod

(Optional) High Gig2 Souce Module ID

hg2_smod

(Optional) High Gig2 Souce Module ID

hg2_l3vld

(Optional) High Gig2 Packet L3 Switched

hg2_l3_vld

(Optional) High Gig2 Packet L3 Switched

hg2_tc

(Optional) High Gig2 Packet Traffic Class

hg2_tc

(Optional) High Gig2 Packet Traffic Class

hg2_dp

(Optional) High Gig2 Drop Precedence

hg2_dp

(Optional) High Gig2 Drop Precedence

hg2_mcast

(Optional) High Gig2 MultiCast Forwarding Information

hg2_mcast_vld

(Optional) High Gig2 Multicast Forwarding Information

hg2-vld

(Optional) High Gig2 Valid Information

hg2_vld

(Optional) High Gig2 Valid Information

hg2-cos

(Optional) High Gig2 CoS Information

hg2_cos

(Optional) High Gig2 CoS Information

Command Mode

- /exec/elamns/sel5

set inner l2 hg2

set inner l2 hg2 [ { hg2_vid <hg2_vlan> | hg2_ppd_type <hg2_ppd_type> | hg2_mirror <hg2_mirror> | hg2_opcode <hg2_opcode> | hg2_dstpid <hg2_dpid> | hg2_dstmod <hg2_dmod> | hg2_srcpid <hg2_spid> | hg2_srcmod <hg2_smod> | hg2_l3vld <hg2_l3_vld> | hg2_tc <hg2_tc> | hg2_dp <hg2_dp> | hg2_mcast <hg2_mcast_vld> | hg2-vld <hg2_vld> | hg2-cos <hg2_cos> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

l2

All Layer 2 Fields

hg2

High Gig2 Fields

hg2_vid

(Optional) High Gig2 VLAN Tag

hg2_vlan

(Optional) High Gig2 VLAN Tag Information

hg2_ppd_type

(Optional) High Gig2 Packet Processing Descriptor

hg2_ppd_type

(Optional) High Gig2 Packet Processing Descriptor

hg2_mirror

(Optional) High Gig2 Packet Mirror Information

hg2_mirror

(Optional) High Gig2 Packet Mirror Information

hg2_opcode

(Optional) High Gig2 Packet Type

hg2_opcode

(Optional) High Gig2 Packet Type

hg2_dstpid

(Optional) High Gig2 Destination Port ID

hg2_dpid

(Optional) High Gig2 Destination Port ID

hg2_dstmod

(Optional) High Gig2 Destination Module ID

hg2_dmod

(Optional) High Gig2 Destination Module ID

hg2_srcpid

(Optional) High Gig2 Source Port ID

hg2_spid

(Optional) High Gig2 Source Port ID

hg2_srcmod

(Optional) High Gig2 Souce Module ID

hg2_smod

(Optional) High Gig2 Souce Module ID

hg2_l3vld

(Optional) High Gig2 Packet L3 Switched

hg2_l3_vld

(Optional) High Gig2 Packet L3 Switched

hg2_tc

(Optional) High Gig2 Packet Traffic Class

hg2_tc

(Optional) High Gig2 Packet Traffic Class

hg2_dp

(Optional) High Gig2 Drop Precedence

hg2_dp

(Optional) High Gig2 Drop Precedence

hg2_mcast

(Optional) High Gig2 MultiCast Forwarding Information

hg2_mcast_vld

(Optional) High Gig2 Multicast Forwarding Information

hg2-vld

(Optional) High Gig2 Valid Information

hg2_vld

(Optional) High Gig2 Valid Information

hg2-cos

(Optional) High Gig2 CoS Information

hg2_cos

(Optional) High Gig2 CoS Information

Command Mode

- /exec/elamns/sel4

set inner l4

set { inner | outer } l4 [ { src-port <sport> | dst-port <dport> | packet-len <pkt_len> | checksum <csum> | flags <flag_val> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

outer

Mask and Match By Outer Packet Fields

l4

L4 Fields

src-port

(Optional) Source Port Information

sport

(Optional) Source Port

dst-port

(Optional) Destination Port Information

dport

(Optional) Destination Port

packet-len

(Optional) Packet Length

pkt_len

(Optional) Packet Length

checksum

(Optional) Checksum

csum

(Optional) Checksum

flags

(Optional) L4 Flags

flag_val

(Optional) L4 Flags

Command Mode

- /exec/elamns/sel7

set inner l4

set inner l4 [ { src-port <sport> | dst-port <dport> | packet-len <pkt_len> | checksum <csum> | flags <flag_val> } ] +

Syntax Description

set

Setup Trigger

inner

Mask and Match By Inner Packet Fields

l4

L4 Fields

src-port

(Optional) Source Port Information

sport

(Optional) Source Port

dst-port

(Optional) Destination Port Information

dport

(Optional) Destination Port

packet-len

(Optional) Packet Length

pkt_len

(Optional) Packet Length

checksum

(Optional) Checksum

csum

(Optional) Checksum

flags

(Optional) L4 Flags

flag_val

(Optional) L4 Flags

Command Mode

- /exec/elamns/sel4

set interface

[no] set interface <iface>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

interface

Output interface

iface

Interface name

Command Mode

- /exec/configure/route-map

set interval find-new-host

[no] set interval find-new-host <val>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set vmtracker options

interval

Set the polling interval

find-new-host

Set interval for the new host searching timer

val

The host search interval value in seconds (0 to disable)

Command Mode

- /exec/configure/vmt-conn

set interval pending-task-polling

[no] set interval pending-task-polling <val>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set vmtracker options

interval

Set the polling interval

pending-task-polling

Define pending-task-polling interval

val

The pending task polling interval value in seconds

Command Mode

- /exec/configure/vmt-conn

set interval sync-full-info

[no] set interval sync-full-info <val>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set vmtracker options

interval

Set the polling interval

sync-full-info

Set interval for syncing complete info from host

val

The sync info interval value in seconds (0 to disable)

Command Mode

- /exec/configure/vmt-conn

set ip address prefix-list

[no] set ip address prefix-list <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

address

Specify IP address

prefix-list

IP prefix-list

name

Name of prefix list

Command Mode

- /exec/configure/route-map

set ip default next-hop

[no] set ip default next-hop [ recursive ] { load-share | <addr1> + [ load-share ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

recursive

(Optional) Use recursive lookup

default

Set default next-hop

next-hop

Next hop address

addr1

IP address of next hop

load-share

Enables load sharing

Command Mode

- /exec/configure/route-map

set ip default next-hop verify-availability

[no] set ip default next-hop verify-availability { <addr> [ track <object_id> ] } [ load-share ]

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

default

Set default next-hop

next-hop

Next hop address

verify-availability

Verify the reachability of the tracked object

addr

IP address of next hop

track

(Optional) The tracking method is track

object_id

(Optional) Object number that the tracking subsystem is tracking

load-share

(Optional) Enables load sharing

Command Mode

- /exec/configure/route-map

set ip next-hop

[no] set ip next-hop [ recursive ] { load-share | <addr1> + [ load-share ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

recursive

(Optional) Use recursive lookup

next-hop

Next hop address

addr1

IP address of next hop

load-share

Enables load sharing

Command Mode

- /exec/configure/route-map

set ip next-hop peer-address

[no] set ip next-hop peer-address

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

next-hop

Next hop address

peer-address

Use peer address (for BGP only)

Command Mode

- /exec/configure/route-map

set ip next-hop redist-unchanged

[no] set ip next-hop redist-unchanged

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

next-hop

Next hop address

redist-unchanged

Use unchanged address during redistribution (for BGP session only)

Command Mode

- /exec/configure/route-map

set ip next-hop unchanged

[no] set ip next-hop unchanged

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

next-hop

Next hop address

unchanged

Use unchanged address (for eBGP session only)

Command Mode

- /exec/configure/route-map

set ip next-hop verify-availability

[no] set ip next-hop verify-availability { <addr> [ track <object_id> ] } [ load-share ]

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

next-hop

Next hop address

verify-availability

Verify the reachability of the tracked object

addr

IP address of next hop

track

(Optional) The tracking method is track

object_id

(Optional) Object number that the tracking subsystem is tracking

load-share

(Optional) Enables load sharing

Command Mode

- /exec/configure/route-map

set ip precedence

{ set ip precedence { <value> | <name> } } | { no set ip precedence [ <value> | <name> ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

ip

Configure IP features

precedence

Set precedence field

value

Precedence value

name

Precedence value

Command Mode

- /exec/configure/route-map

set ipv6 address prefix-list

[no] set ipv6 address prefix-list <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

address

Specify IP address

prefix-list

IPv6 prefix-list

name

Name of prefix list

Command Mode

- /exec/configure/route-map

set ipv6 default next-hop

[no] set ipv6 default next-hop [ recursive ] { load-share | <addr1> + [ load-share ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

recursive

(Optional) Use recursive lookup

default

Set default next-hop

next-hop

Next hop address

load-share

Enables load sharing

addr1

Command Mode

- /exec/configure/route-map

set ipv6 default next-hop verify-availability

[no] set ipv6 default next-hop verify-availability { <addr> [ track <object_id> ] } [ load-share ]

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

next-hop

Next hop address

default

Set default next-hop

verify-availability

Verify the reachability of the tracked object

track

(Optional) The tracking method is track

object_id

(Optional) Object number that the tracking subsystem is tracking

load-share

(Optional) Enables load sharing

Command Mode

- /exec/configure/route-map

set ipv6 next-hop

[no] set ipv6 next-hop { load-share | <addr> + [ load-share ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

next-hop

Next hop ipv6 address

load-share

Enables load sharing

addr

Command Mode

- /exec/configure/route-map

set ipv6 next-hop peer-address

[no] set ipv6 next-hop peer-address

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

next-hop

Next hop address

peer-address

Use peer address (for BGP only)

Command Mode

- /exec/configure/route-map

set ipv6 next-hop redist-unchanged

[no] set ipv6 next-hop redist-unchanged

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

next-hop

Next hop address

redist-unchanged

Use unchanged address during redistribution (for BGP session only)

Command Mode

- /exec/configure/route-map

set ipv6 next-hop unchanged

[no] set ipv6 next-hop unchanged

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

next-hop

Next hop address

unchanged

Use unchanged address (for eBGP session only)

Command Mode

- /exec/configure/route-map

set ipv6 next-hop verify-availability

[no] set ipv6 next-hop verify-availability { <addr> [ track <object_id> ] } [ load-share ]

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

next-hop

Next hop address

verify-availability

Verify the reachability of the tracked object

track

(Optional) The tracking method is track

object_id

(Optional) Object number that the tracking subsystem is tracking

load-share

(Optional) Enables load sharing

Command Mode

- /exec/configure/route-map

set ipv6 precedence

{ set ipv6 precedence { <value> | <name> } } | { no set ipv6 precedence [ <value> | <name> ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

ipv6

Configure IPv6 features

precedence

Set precedence field

value

Precedence value

name

Precedence value

Command Mode

- /exec/configure/route-map

set label-index

{ { set label-index <value> } | { no set label-index [ <value> ] } }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

label-index

Set Segment Routing (SR) label index of route

value

Segment Routing (SR) label index

Command Mode

- /exec/configure/route-map

set level level-1 level-1-2 level-2

{ set level { level-1 | level-1-2 | level-2 } } | { no set level [ level-1 | level-1-2 | level-2 ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

level

Where to import route

level-1

Import into a level-1 area

level-1-2

Import into level-1 and level-2

level-2

Import into level-2 sub-domain

Command Mode

- /exec/configure/route-map

set local-preference

{ set local-preference <pref> | no set local-preference [ <pref> ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

local-preference

BGP local preference path attribute

pref

Preference value

Command Mode

- /exec/configure/route-map

set metric

{ set metric <metric0> [ <metric1> <metric2> <metric3> <metric4> ] } | { no set metric [ <metric0> [ <metric1> <metric2> <metric3> <metric4> ] ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

metric

Set metric for destination routing protocol

metric0

[+/-] Metric value or Bandwidth in Kbits per second

metric1

(Optional) IGRP delay metric

metric2

(Optional) IGRP reliability metric where 255 is 100% reliable

metric3

(Optional) IGRP Effective bandwidth metric (Loading) 255 is 100%

metric4

(Optional) IGRP MTU of the path

Command Mode

- /exec/configure/route-map

set mpls-exp-topmost cos table exp-cos-map

[no] set mpls-exp-topmost cos table exp-cos-map

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set attribute

mpls-exp-topmost

MPLS experimental topmost

cos

IEEE 802.1Q Class of Service

table

Table map

exp-cos-map

Exp to cos table map name (reserved)

Command Mode

- /exec/configure/policy-map/type/queuing/class

set nssa-only

[no] set nssa-only

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

nssa-only

OSPF NSSA Areas

Command Mode

- /exec/configure/route-map

set origin egp

{ set origin egp <as> } | { no set origin egp <as> }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

origin

BGP origin code

egp

remote EGP

as

AS number

Command Mode

- /exec/configure/route-map

set origin egp igp incomplete

{ set origin { egp | igp | incomplete } } | { no set origin [ { egp | igp | incomplete } ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

origin

BGP origin code

egp

remote EGP

igp

local IGP

incomplete

unknown heritage

Command Mode

- /exec/configure/route-map

set outer ipv4

set outer ipv4 [ { l3-type <l3_type> | pyld-len <pyld_len> | v6-vld <v6_vld> | version <ver> | header-len <hlen> | dscp <dscp_val> | ecn <ecn_val> | packet-len <pkt_len> | more-frags <mf> | fragment-off <fragoff> | ttl <ttl_val> | next-protocol <nproto> | checksum <csum> | src_ip <sip> | dst_ip <dip> } ] +

Syntax Description

set

Setup Trigger

outer

Mask and Match By Outer Packet Fields

ipv4

IPv4 Fields

l3-type

(Optional) L3 Packet Type

l3_type

(Optional) L3 Packet Type

pyld-len

(Optional) Payload Length

pyld_len

(Optional) Payload Length

v6-vld

(Optional) IPv6 Valid Information

v6_vld

(Optional) IPv6 Valid Information

version

(Optional) Version

ver

(Optional) Version

header-len

(Optional) Header Length

hlen

(Optional) Header Length

dscp

(Optional) Diff. Serv. Code Point

dscp_val

(Optional) Diff. Serv. Code Point

ecn

(Optional) Explicit Congestion Ntfn

ecn_val

(Optional) Explicit Congestion Ntfn

packet-len

(Optional) Packet Total Length

pkt_len

(Optional) Packet Total Length

more-frags

(Optional) More Fragments Available

mf

(Optional) More Fragments Available

fragment-off

(Optional) Fragments Offset

fragoff

(Optional) Fragments Offset

ttl

(Optional) Time to Live

ttl_val

(Optional) Time to Live

next-protocol

(Optional) Next(L4) Protocol

nproto

(Optional) Next(L4) Protocol

checksum

(Optional) Checksum

csum

(Optional) Checksum

src_ip

(Optional) Source IP Address

sip

(Optional) Source IP Address

dst_ip

(Optional) Destination IP Address

dip

(Optional) Destination IP Address

Command Mode

- /exec/elamns/sel3

set outer l2

set outer l2 [ { snap_vld <snap_vld> | cntag_vld <cntag_vld> | qtag_vld <qtag_vld> | vlan <vlan_id> | cos <cos_val> | cfi <cfi_vld> | vntag_vld <vntag_vld> | vntag_svif <vntag_svif> | vntag_dvif <vntag_dvif> | vntag_looped <vntag_loop> | vntag_pointer <vntag_p> | src_mac <smac> | dst_mac <dmac> } ] +

Syntax Description

set

Setup Trigger

outer

Mask and Match By Outer Packet Fields

l2

All Layer 2 Fields

snap_vld

(Optional) SNAP Header Information Valid

snap_vld

(Optional) SNAP Header Information Valid

cntag_vld

(Optional) CNTag Information Valid

cntag_vld

(Optional) CNTag Information Valid

qtag_vld

(Optional) VLAN Tag Information Valid

qtag_vld

(Optional) VLAN Tag Information Valid

vlan

(Optional) VLAN Id (Present only in case of FEX)

vlan_id

(Optional) VLAN Id

cos

(Optional) Class of Service

cos_val

(Optional) Class of Service Type

cfi

(Optional) CFI Setting

cfi_vld

(Optional) CFI Setting Valid

vntag_vld

(Optional) VNTAG Information Valid

vntag_vld

(Optional) VNTAG Information Valid

vntag_svif

(Optional) VNTAG Source vif

vntag_svif

(Optional) VNTAG Source vif

vntag_dvif

(Optional) VNTAG Destination vif

vntag_dvif

(Optional) VNTAG Destination vif

vntag_looped

(Optional) VNTAG Header Looped Valid

vntag_loop

(Optional) VNTAG Header Looped Valid

vntag_pointer

(Optional) VNTAG Header Pointer Valid

vntag_p

(Optional) VNTAG Header Pointer Valid

src_mac

(Optional) Source MAC Address

smac

(Optional) Source MAC Address Value

dst_mac

(Optional) Destination MAC Address

dmac

(Optional) Destination MAC Address Value

Command Mode

- /exec/elamns/sel3

set outer l2 hg2

set outer l2 hg2 [ { hg2_vid <hg2_vlan> | hg2_ppd_type <hg2_ppd_type> | hg2_mirror <hg2_mirror> | hg2_opcode <hg2_opcode> | hg2_dstpid <hg2_dpid> | hg2_dstmod <hg2_dmod> | hg2_srcpid <hg2_spid> | hg2_srcmod <hg2_smod> | hg2_l3vld <hg2_l3_vld> | hg2_tc <hg2_tc> | hg2_dp <hg2_dp> | hg2_mcast <hg2_mcast_vld> | hg2-vld <hg2_vld> | hg2-cos <hg2_cos> } ] +

Syntax Description

set

Setup Trigger

outer

Mask and Match By Outer Packet Fields

l2

All Layer 2 Fields

hg2

High Gig2 Fields

hg2_vid

(Optional) High Gig2 VLAN Tag

hg2_vlan

(Optional) High Gig2 VLAN Tag Information

hg2_ppd_type

(Optional) High Gig2 Packet Processing Descriptor

hg2_ppd_type

(Optional) High Gig2 Packet Processing Descriptor

hg2_mirror

(Optional) High Gig2 Packet Mirror Information

hg2_mirror

(Optional) High Gig2 Packet Mirror Information

hg2_opcode

(Optional) High Gig2 Packet Type

hg2_opcode

(Optional) High Gig2 Packet Type

hg2_dstpid

(Optional) High Gig2 Destination Port ID

hg2_dpid

(Optional) High Gig2 Destination Port ID

hg2_dstmod

(Optional) High Gig2 Destination Module ID

hg2_dmod

(Optional) High Gig2 Destination Module ID

hg2_srcpid

(Optional) High Gig2 Source Port ID

hg2_spid

(Optional) High Gig2 Source Port ID

hg2_srcmod

(Optional) High Gig2 Souce Module ID

hg2_smod

(Optional) High Gig2 Souce Module ID

hg2_l3vld

(Optional) High Gig2 Packet L3 Switched

hg2_l3_vld

(Optional) High Gig2 Packet L3 Switched

hg2_tc

(Optional) High Gig2 Packet Traffic Class

hg2_tc

(Optional) High Gig2 Packet Traffic Class

hg2_dp

(Optional) High Gig2 Drop Precedence

hg2_dp

(Optional) High Gig2 Drop Precedence

hg2_mcast

(Optional) High Gig2 MultiCast Forwarding Information

hg2_mcast_vld

(Optional) High Gig2 Multicast Forwarding Information

hg2-vld

(Optional) High Gig2 Valid Information

hg2_vld

(Optional) High Gig2 Valid Information

hg2-cos

(Optional) High Gig2 CoS Information

hg2_cos

(Optional) High Gig2 CoS Information

Command Mode

- /exec/elamns/sel3

set outer l4

set outer l4 [ { src-port <sport> | dst-port <dport> | packet-len <pkt_len> | checksum <csum> | flags <flag_val> } ] +

Syntax Description

set

Setup Trigger

outer

Mask and Match By Outer Packet Fields

l4

L4 Fields

src-port

(Optional) Source Port Information

sport

(Optional) Source Port

dst-port

(Optional) Destination Port Information

dport

(Optional) Destination Port

packet-len

(Optional) Packet Length

pkt_len

(Optional) Packet Length

checksum

(Optional) Checksum

csum

(Optional) Checksum

flags

(Optional) L4 Flags

flag_val

(Optional) L4 Flags

Command Mode

- /exec/elamns/sel3

set path-selection all advertise

[no] set path-selection all advertise

Syntax Description

no

(Optional) Negate a command or set its defaults

set

Set values in destination routing protocol

path-selection

Path selection criteria for BGP

all

Specifies all BGP Paths

advertise

Advertise add paths to its peers if receive capability enabled

Command Mode

- /exec/configure/route-map

set pktmgr pds yield-threshold

set pktmgr pds yield-threshold [ <thr> ]

Syntax Description

set

Set values

pktmgr

Set values in pktmgr

pds

Set value for pktmgr pds operation

yield-threshold

Set Value of yield-threshold

thr

(Optional) threshold

Command Mode

- /exec

set pktrw

set pktrw { mcast <mcast> | sup_redir <sured> | bcm_proxy <bcm_proxy> | excep_case <excep> | transit <trans> | vpc_df <vpc_df> | src_tep_idx <src_tep> | lat_update <lat_update> | lat_idx <lat_idx> | src_class <sclass> | ol_fb_met <ol_fb_met> | ol_fb_vpath <ol_fb_vpath> | ol_dre <ol_dre> | ol_vpath <ol_vpath> | ol_dp <ol_dp> | ol_sp <ol_sp> | ol_e <ol_e> | ol_dl <ol_dl> | ol_lb <ol_lb> | ol_mark <ol_mark> | ol_udp_sp <ol_udp_sp> | ol_ftag <ol_ftag> | ol_segid <ol_segid> | ol_ttl <ol_ttl> | ol_ecn <ol_ecn> | ol_dscp <ol_dscp> | ol_de <ol_de> | ol_cos <ol_cos> | ol_mac <ol_mac> | ol_encap_idx <ol_encap> | ol_vpc <ol_vpc> | ol_idx <ol_idx> | ttl <ttl> | dscp <dscp> | vlan1 <vlan1> | ecn_coi <ecn_coi> | ecn_cio <ecn_cio> | ttl_coi <ttl_coi> | ttl_cio <ttl_cio> | adj_idx <adj_idx> | vntag_svif <vntag_svif> | de <de> | cos <cos> | vlan0 <vlan0> | adj_vld <adj_vld> | uc_routed <uc_routed> | loopback <lpb> | ecn <ecn> | hg2_vid <hg2_vlan> | hg2_ppd <hg2_ppd> | hg2_tc_sup_copy <hg2_tcscpy> | hg2_tc <hg2_tc> | hg2_lbid <hg2_lbid> | hg2_opc <hg2_opc> | hg2_dstpid <hg2_dpid> | hg2_srcpid <hg2_spid> | hg2_dstmod <hg2_dmod> | hg2_srcmod <hg2_smod> | op_inner <op_inner> | op_qtag <op_qtag> | op_vntag <op_vntag> | op_outer <op_outer> | pkt_type <pkt_type> | drop <drp> | pkt_tstmp <pkt_tstmp> | tstmp <tstmp> | cap_tstmp <cap_tstmp> | len_info <len_info> | len_type <len_type> | pktid <pktid> | srcid <srcid> | pktfmt1 <pktfmt1> | pktfmt0 <pktfmt0> | hg2_cos <hg2_cos> } +

Syntax Description

set

Setup Trigger

pktrw

All packet re-write fields

mcast

mcast

mcast

Mcast

sup_redir

Sup Redirect

sured

Sup Redirect

bcm_proxy

Broadcom Proxy

bcm_proxy

Broadcom Proxy

excep_case

Excep_case

excep

Excep_case

transit

Transit

trans

Transit

vpc_df

VPC_df

vpc_df

VPC_df

src_tep_idx

Src TEP Index

src_tep

Src TEP Index

lat_update

Lat Update

lat_update

Lat Update

lat_idx

Lat Index

lat_idx

Lat Index

src_class

Source Class

sclass

Source Class

ol_fb_met

Ol_fb_metric

ol_fb_met

Ol_fb_metric

ol_fb_vpath

Ol_fb_vpath

ol_fb_vpath

Ol_fb_vpath

ol_dre

Ol_dre

ol_dre

Ol_dre

ol_vpath

Ol_vpath

ol_vpath

Ol_vpath

ol_dp

Ol_dp

ol_dp

Ol_dp

ol_sp

Ol_sp

ol_sp

Ol_sp

ol_e

Ol_e

ol_e

Ol_e

ol_dl

Ol_dl

ol_dl

Ol_dl

ol_lb

Ol_lb

ol_lb

Ol_lb

ol_mark

Ol_mark

ol_mark

Ol_mark

ol_udp_sp

Ol_UDP_sp

ol_udp_sp

Ol UDP Source Port

ol_ftag

Ol_ftag

ol_ftag

Ol_ftag

ol_segid

Ol_segid

ol_segid

Ol_segid

ol_ttl

Ol_TTL

ol_ttl

Ol_TTL

ol_ecn

Ol_ecn

ol_ecn

Ol_ecn

ol_dscp

Ol_dscp

ol_dscp

Ol_dscp

ol_de

Ol_de

ol_de

Ol_de

ol_cos

Ol_cos

ol_cos

Ol_cos

ol_mac

Ol_mac

ol_mac

Ol_mac

ol_encap_idx

Ol_encap_idx

ol_encap

Ol_encap_idx

ol_vpc

Ol_VPC

ol_vpc

Ol_VPC

ol_idx

Ol_idx

ol_idx

Ol_idx

ttl

TTL

ttl

TTL

dscp

DSCP

dscp

DSCP

vlan1

Vlan1

vlan1

Vlan1

ecn_coi

ecn_coi

ecn_coi

ecn_coi

ecn_cio

ecn_cio

ecn_cio

ecn_cio

ttl_coi

ttl_coi

ttl_coi

ttl_coi

ttl_cio

ttl_cio

ttl_cio

ttl_cio

adj_idx

adj_idx

adj_idx

adj_idx

vntag_svif

vntag_svif

vntag_svif

vntag_svif

de

de

de

de

cos

cos

cos

cos

vlan0

vlan0

vlan0

vlan0

adj_vld

adj_vld

adj_vld

adj_vld

uc_routed

uc_routed

uc_routed

uc_routed

loopback

loopback

lpb

loopback

ecn

ecn

ecn

ecn

hg2_vid

High Gig2 VLAN Tag

hg2_vlan

High Gig2 VLAN Tag Information

hg2_cos

High Gig2 CoS Information

hg2_cos

High Gig2 CoS Information

hg2_ppd

High Gig2 Packet Processing Descriptor

hg2_ppd

High Gig2 Packet Processing Descriptor

hg2_tc_sup_copy

High Gig2 Traffic Class SUP Copy

hg2_tcscpy

High Gig2 Traffic Class SUP Copy

hg2_tc

High Gig2 Packet Traffic Class

hg2_tc

High Gig2 Packet Traffic Class

hg2_lbid

High Gig2 Packet lbid

hg2_lbid

High Gig2 Packet lbid

hg2_opc

High Gig2 Packet Type

hg2_opc

High Gig2 Packet Type

hg2_dstpid

High Gig2 Destination Port ID

hg2_dpid

High Gig2 Destination Port ID

hg2_dstmod

High Gig2 Destination Module ID

hg2_dmod

High Gig2 Destination Module ID

hg2_srcpid

High Gig2 Source Port ID

hg2_spid

High Gig2 Source Port ID

hg2_srcmod

High Gig2 Souce Module ID

hg2_smod

High Gig2 Souce Module ID

op_inner

Op_inner

op_inner

Op_inner

op_outer

Op_outer

op_outer

Op_outer

op_qtag

Op_qtag

op_qtag

Op_qtag

op_vntag

Op_vntag

op_vntag

Op_vntag

pkt_type

Pkt_type

pkt_type

Pkt_type

drop

Drop

drp

Drop

pkt_tstmp

Packet timestamp

pkt_tstmp

Packet timestamp

tstmp

Timestamp

tstmp

Timestamp

cap_tstmp

Capture Timestamp

cap_tstmp

Capture Timestamp

len_info

Len_info

len_info

Len_info

len_type

Len_type

len_type

Len_type

pktid

Pkt_id

pktid

Pkt_id

srcid

Src_id

srcid

Src_id

pktfmt1

Pktfmt1

pktfmt1

Pktfmt1

pktfmt0

Pktfmt0

pktfmt0

Pktfmt0

Command Mode

- /exec/elamns/outsel0

set sideband

set sideband { span_vec <span_vec> | bounce <bnc> | mclast <mclast> | mcastcurptr <mccurptr> | mcastcurptr_v <mccurptr_v> | srcport <sport> | vlan <vlan> | segwgt <segwgt> | segid <segid> | seglocal <seglcl> | gbw_color <gbw_color> | gbw_tag <gbw_tagg> | fwddrp <fwddrp> | l2fld <l2fld> | nodrp <nodrp> | ovrlyidx <ovrlyidx> | ecncap <ecncap> | cpu <cpu> | store_fwd <stfwd> | mcast <mcast> | oclass <ocls> | iclass <icls> | odest_v <odest_v> | odest <odest> | ovec <ovec> | span_trans <span_trans> | lbtype <lbtype> | lbena <lbena> | tdmid <tdmid> | pktid <pktid> | srcid <srcid> | eoferror <eoferr> | eofbytes <eofby> | eof <eof> | sof <sof> } +

Syntax Description

set

Setup Trigger

sideband

All sideband fields

span_vec

SPAN vector

span_vec

SPAN vector

bounce

Bounce

bnc

Bounce

mclast

Mclast

mclast

Mclast

mcastcurptr

Mcast cur ptr

mccurptr

Mcast cur ptr

mcastcurptr_v

Mcast cur ptr v

mccurptr_v

Mcast cur ptr v

srcport

Source Port

sport

Source Port

vlan

Vlan

vlan

Vlan

segwgt

Segwgt

segwgt

Segwgt

segid

Segid

segid

Segid

seglocal

Seglocal

seglcl

Seglocal

gbw_color

GBW color

gbw_color

GBW color

gbw_tag

GBW tagged

gbw_tagg

GBW tagged

fwddrp

Forward drop

fwddrp

Forward drop

l2fld

L2 Flood

l2fld

L2 Flood

nodrp

No drop

nodrp

No drop

ovrlyidx

Overlay index

ovrlyidx

Overlay index

ecncap

ECN Capable

ecncap

ECN Capable

cpu

CPU

cpu

CPU

store_fwd

Store_fwd

stfwd

Store_fwd

mcast

Multicast

mcast

Multicast

oclass

Output class

ocls

Output class

iclass

Input class

icls

Input class

odest_v

Odest_v

odest_v

Odest_v

odest

Odest

odest

Odest

ovec

Ovector

ovec

Ovector

span_trans

SPAN transit

span_trans

SPAN transit

lbtype

Lbtype

lbtype

Lbtype

lbena

Lbenable

lbena

Lbenable

tdmid

Tdmid

tdmid

Tdmid

pktid

Pkt_id

pktid

Pkt_id

srcid

Src_id

srcid

Src_id

eoferror

EOF error

eoferr

EOF erro

eofbytes

EOF bytes

eofby

EOF bytes

eof

EOF

eof

EOF

sof

SOF

sof

SOF

Command Mode

- /exec/elamns/outsel5

set tag

{ { set tag <value> } | { no set tag [ <value> ] } }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

tag

Tag value for destination routing protocol

value

Tag value

Command Mode

- /exec/configure/route-map

set weight

{ set weight <count> | no set weight [ <count> ] }

Syntax Description

no

Negate a command or set its defaults

set

Set values in destination routing protocol

weight

BGP weight for routing table

count

Weight value

Command Mode

- /exec/configure/route-map

setup

setup

Syntax Description

setup

Run the basic SETUP command facility

Command Mode

- /exec

sflow

sflow { [ sampling-rate <rate> ] | [ max-sampled-size <pkt-size> ] | [ counter-poll-interval <interval> ] | [ max-datagram-size <dgram-size> ] | [ collector-ip <dst-ip> vrf { <vrf-name> | <vrf-known-name> } [ source <src-ip> ] ] | [ collector-port <dst-port> ] | [ agent-ip <agent-ip> ] }

Syntax Description

sflow

change sFlow global settings

sampling-rate

(Optional) sFlow Sampling Rate

rate

(Optional) sFlow Sampling rate

max-sampled-size

(Optional) sFlow Sampled Size

pkt-size

(Optional) sFlow Sampled Size

counter-poll-interval

(Optional) sFlow Counter Poll Interval

interval

(Optional) sFlow Counter Poll Interval

max-datagram-size

(Optional) sFlow Datagram Size

dgram-size

(Optional) sFlow Datagram Size

collector-ip

(Optional) sFlow Collector IP address

dst-ip

(Optional) sFlow Collector IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source

(Optional) Source IP address to send to sFlow Collector

src-ip

(Optional) Source IP address to send to sFlow Collector

collector-port

(Optional) sFlow Collector UDP port

dst-port

(Optional) sFlow Collector UDP port

agent-ip

(Optional) sFlow Agent IP address

agent-ip

(Optional) sFlow Agent IP address

Command Mode

- /exec/configure

sflow

[no] sflow { sampling-rate | max-sampled-size | counter-poll-interval | max-datagram-size | collector-ip | collector-port | agent-ip }

Syntax Description

no

Negate a command or set its defaults

sflow

change sFlow global settings

sampling-rate

sFlow Sampling Rate

max-sampled-size

sFlow Sampled Size

counter-poll-interval

sFlow Counter Poll Interval

max-datagram-size

sFlow Datagram Size

collector-ip

sFlow Collector IP address

collector-port

sFlow Collector UDP port

agent-ip

sFlow Agent IP address

Command Mode

- /exec/configure

sflow cpu-usage limit

sflow cpu-usage limit <percent>

Syntax Description

sflow

change sFlow global settings

cpu-usage

sFlow cpu usage setting

limit

sFlow cpu usage limit

percent

sFlow cpu usage limit percentage

Command Mode

- /exec/configure

sflow data-source interface

sflow data-source interface { <ifnum> | <pcifnum> }

Syntax Description

sflow

change sFlow global settings

data-source

sFlow Data Source

interface

sFlow Data Source Interface

ifnum

sFlow Data Source Interface

pcifnum

sFlow Data Source Interface

Command Mode

- /exec/configure

sflow data-source interface

[no] sflow data-source interface { <ifnum> | <pcifnum> }

Syntax Description

no

Negate a command or set its defaults

sflow

change sFlow global settings

data-source

sFlow Data Source

interface

sFlow Data Source Interface

ifnum

sFlow Data Source Interface

pcifnum

sFlow Data Source Interface

Command Mode

- /exec/configure

sflow extended switch

[no] sflow extended switch

Syntax Description

no

(Optional) Negate a command or set its defaults

sflow

change sFlow global settings

extended

sFlow extended flow records

switch

sFlow extended switch flow

Command Mode

- /exec/configure

shape

[no] shape { { { [ average ] { <avg-rate> [ bps | kbps | mbps | gbps ] | percent <percentage> } } | { min { <min-rate> [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent2 <percentage2> } max { <max-rate> [ bps3 | kbps3 | mbps3 | gbps3 | pps3 ] | percent3 <percentage3> } } } | { { kbps4 | pps4 } { <max-rate4> [ min2 <min-rate4> ] } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

shape

shape

average

(Optional) Configure average shape rate

min

Configure minimum shape rate

max

Configure maximum shape rate

bps

(Optional) Bits per second

kbps

(Optional) Kilo bits per second

mbps

(Optional) Mega bits per second

gbps

(Optional) Giga bits per second

bps2

(Optional) Bits per second

kbps2

(Optional) Kilo Bits per second

mbps2

(Optional) Mega Bits per second

gbps2

(Optional) Giga Bits per second

pps2

(Optional) Packets per second

bps3

(Optional) Bits per second

kbps3

(Optional) Kilo Bits per second

mbps3

(Optional) Mega Bits per second

gbps3

(Optional) Giga Bits per second

pps3

(Optional) Packets per second

percent

Specify rate as percentage of interface data-rate

percent2

Specify rate as percentage of interface data-rate

percent3

Specify rate as percentage of interface data-rate

percentage

Percentage

percentage2

Percentage

percentage3

Percentage

kbps4

Kilo Bits per second

pps4

Packets per second

min2

(Optional) Min guaranteed bandwidth

Command Mode

- /exec/configure/policy-map/type/queuing/class

shared-secret

[no] shared-secret { 10 <clear> | 7 <encrypted> | <secret> } [ user <user> password { 0 <clear> | 7 <encrypted> | <password> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

shared-secret

Shared-secret

secret

Enter shared-secret in clear text

10

password in clear text

clear

Password in clear text

7

Password that follows should be in encrypted text

encrypted

Encrypted password

user

(Optional) User Name

user

(Optional) Enter user name

password

(Optional) Password

password

(Optional) Enter password in clear text

0

(Optional) Password that follows should be in clear text

clear

(Optional) Password in clear text

7

(Optional) Password that follows should be in encrypted text

encrypted

(Optional) Encrypted password

Command Mode

- /exec/configure/fabric-db/server-radius

shut

[no] shut

Syntax Description

no

(Optional) Negate a command or set its defaults

shut

Shut a monitor session

Command Mode

- /exec/configure/monitor-common

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Command Mode

- /exec/configure/itd /exec/configure/itd-inout

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown current VRF

Command Mode

- /exec/configure/vrf

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown this instance of RIP

Command Mode

- /exec/configure/router-rip /exec/configure/router-rip/router-rip-vrf

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown the OSPF protocol instance

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Command Mode

- /exec/configure/itd /exec/configure/itd-inout

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

Command Mode

- /exec/configure/if-mgmt-ether

shutdown

[no] shutdown [ force ]

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

force

(Optional) Enable/disable an interface

Command Mode

- /exec/configure/if-ethernet /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel /exec/configure/if-eth-port-channel /exec/configure/if-ethernet-all /exec/configure/if-ethernet-p2p /exec/configure/if-remote-ethernet-sub /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub

shutdown

[no] shutdown [ force ]

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

force

(Optional) Enable/disable an interface

Command Mode

- /exec/configure/if-ethernet /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel /exec/configure/if-eth-port-channel /exec/configure/if-ethernet-all /exec/configure/if-ethernet-p2p /exec/configure/if-remote-ethernet-sub /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub

shutdown

[no] shutdown [ force ]

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

force

(Optional) Enable/disable an interface

Command Mode

- /exec/configure/if-nve

shutdown

[no] shutdown [ force ]

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

force

(Optional) Enable/disable an interface

Command Mode

- /exec/configure/if-loopback

shutdown

[no] shutdown [ force ]

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

force

(Optional) Enable/disable an interface

Command Mode

- /exec/configure/if-cpp /exec/configure/if-fv /exec/configure/if-fa /exec/configure/if-svc /exec/configure/if-fc-tunnel /exec/configure/if-sme /exec/configure/if-ioa /exec/configure/if-overlay /exec/configure/if-te

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

Command Mode

- /exec/configure/if-gig-ether /exec/configure/if-fc /exec/configure/if-bay /exec/configure/if-ext /exec/configure/if-vsan /exec/configure/if-iscsi /exec/configure/if-fcip /exec/configure/if-sme /exec/configure/if-ioa /exec/configure/if-vfc /exec/configure/if-vfc-port-channel

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown MPLS Traffic Engineering

Command Mode

- /exec/configure/te

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Disable current explicit-path

Command Mode

- /exec/configure/te/expl-path

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown the CBTS member LSP

Command Mode

- /exec/configure/tunnel-te/cbts-member

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown VLAN switching

Command Mode

- /exec/configure/vlan

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown tunnel interface(s)

Command Mode

- /exec/configure/if-any-tunnel

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown this IS-IS process

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Disable MPLS forwarding for IP

Command Mode

- /exec/configure/ldp

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

shutdown the OSPF protocol instance

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shutdown this instance of EIGRP

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

shutdown

shutdown | no shutdown

Syntax Description

no

Negate a command or set its defaults

shutdown

suspend vPC locally

Command Mode

- /exec/configure/vpc-domain

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Administratively shutdown BGP protocol

Command Mode

- /exec/configure/router-bgp

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Administratively shutdown this BMP server

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

shutdown

[ no | default ] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

shutdown

Administratively shutdown this neighbor

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Change the admin status of the bundle

Command Mode

- /exec/configure/anycast

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

Command Mode

- /exec/configure/if-vlan-common

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable or disable a VR

Command Mode

- /exec/configure/if-eth-any/vrrp

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shut down VRRPv3

Command Mode

- /exec/configure/vrrpv3

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shut down the group

Command Mode

- /exec/configure/if-eth-any/vrrpv3

shutdown

[no] shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Shut down the pathway

Command Mode

- /exec/configure/if-eth-any/vrrs

shutdown force

[no] shutdown force

Syntax Description

no

(Optional) Negate a command or set its defaults

shutdown

Enable/disable an interface

force

Enable/disable an interface

Command Mode

- /exec/configure/if-mgmt-ether

shutdown lan

shutdown lan

Syntax Description

shutdown

Enable/disable an interface

lan

Shut all LAN VLANs on interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

shutdown lan

[no] shutdown lan

Syntax Description

no

Negate a command or set its defaults

shutdown

Enable/disable an interface

lan

Shut all LAN VLANs on interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

signalling advertise explicit-null

[no] signalling advertise explicit-null | signalling advertise explicit-null [ <acl> ]

Syntax Description

no

Negate a command or set its defaults

signalling

Traffic Engineering Signalling Parameters

advertise

Signalling advertisement parameters

explicit-null

Advertise explicit-null label in signalling messages

acl

(Optional) Access list

Command Mode

- /exec/configure/te

signalling client batch-time

[no] signalling client batch-time <msec>

Syntax Description

signalling

Configure RSVP Signalling information

client

Client information

batch-time

Time interval between batched messages to client

msec

Batch-time msec [use 0 to disble, else minimum timer value is 20 msec]

Command Mode

- /exec/configure/ip-rsvp

signalling hello graceful-restart

[no] signalling hello graceful-restart

Syntax Description

signalling

Configure RSVP Signalling information

hello

RSVP Hello configuration commands

graceful-restart

RSVP Graceful restart commands

Command Mode

- /exec/configure/ip-rsvp

signalling hello graceful-restart refresh interval

[no] signalling hello graceful-restart refresh interval <value>

Syntax Description

signalling

Configure RSVP Signalling information

hello

RSVP Hello configuration commands

graceful-restart

RSVP Graceful restart commands

refresh

Configure RSVP Hello refresh behavior for Graceful Restart

interval

Time between sending Hello Requests for Graceful Restart

value

Hello interval in msec

Command Mode

- /exec/configure/ip-rsvp

signalling hello graceful-restart refresh misses

[no] signalling hello graceful-restart refresh misses <value>

Syntax Description

signalling

Configure RSVP Signalling information

hello

RSVP Hello configuration commands

graceful-restart

RSVP Graceful restart commands

refresh

Configure RSVP Hello refresh behavior for Graceful Restart

misses

Number of Hello misses for Graceful Restart

value

Number of missed Hello Acks which triggers neighbor down

Command Mode

- /exec/configure/ip-rsvp

signalling hello graceful-restart send recovery-time

[no] signalling hello graceful-restart send recovery-time <value>

Syntax Description

signalling

Configure RSVP Signalling information

hello

RSVP Hello configuration commands

graceful-restart

RSVP Graceful restart commands

send

Configure the restart-time in outgoing Hello msgs

recovery-time

Configure the recovery-time in outgoing GR Hello msgs

value

recovery-time in msec

Command Mode

- /exec/configure/ip-rsvp

signalling hello graceful-restart send restart-time

[no] signalling hello graceful-restart send restart-time <value>

Syntax Description

signalling

Configure RSVP Signalling information

hello

RSVP Hello configuration commands

graceful-restart

RSVP Graceful restart commands

send

Configure the restart-time in outgoing Hello msgs

restart-time

Configure the restart-time in outgoing GR Hello msgs

value

restart-time in msec

Command Mode

- /exec/configure/ip-rsvp

signalling hello reroute

[no] signalling hello reroute

Syntax Description

signalling

Configure RSVP Signalling information

hello

RSVP Hello configuration commands

reroute

RSVP Reroute commands

Command Mode

- /exec/configure/ip-rsvp

signalling initial-retransmit-delay

[no] signalling initial-retransmit-delay <msec>

Syntax Description

signalling

Configure RSVP Signalling information

initial-retransmit-delay

RSVP Initial retransmit delay

msec

Initial retransmit delay in millisec

Command Mode

- /exec/configure/ip-rsvp

signalling patherr state-removal

[no] signalling patherr state-removal

Syntax Description

signalling

Configure RSVP Signalling information

patherr

Configure Path-Error processing

state-removal

Setup automatic removal of path-state

Command Mode

- /exec/configure/ip-rsvp

signalling rate-limit

[no] signalling rate-limit { [ interval <msec> ] [ limit <messages> ] } | { [ limit <messages> ] [ interval <msec> ] }

Syntax Description

signalling

Configure RSVP Signalling information

rate-limit

Configure rate-limiting

interval

(Optional) Configure scheduling interval

msec

(Optional) Interval in millisec

limit

(Optional) Configure message limit per scheduling interval

messages

(Optional) Message limit value

Command Mode

- /exec/configure/ip-rsvp

signalling refresh interval

[no] signalling refresh interval <seconds>

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

interval

Set signaling refresh interval

seconds

Signaling refresh interval in seconds

Command Mode

- /exec/configure/ip-rsvp

signalling refresh misses

[no] signalling refresh misses <value>

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

misses

Set refresh misses tolerated before expiring a state

value

Refresh miss value

Command Mode

- /exec/configure/ip-rsvp

signalling refresh pace

[no] signalling refresh pace

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

pace

Pace sending of refresh messages

Command Mode

- /exec/configure/ip-rsvp

signalling refresh reduction

[no] signalling refresh reduction

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

reduction

Enable, disable or set refresh reduction parameters

Command Mode

- /exec/configure/ip-rsvp

signalling refresh reduction ack-delay

[no] signalling refresh reduction ack-delay <msec>

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

reduction

Enable, disable or set refresh reduction parameters

ack-delay

Set delay for sending ACK messages

msec

ACK delay value in millisec

Command Mode

- /exec/configure/ip-rsvp

signalling refresh reduction bundle-max-size

[no] signalling refresh reduction bundle-max-size <value>

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

reduction

Enable, disable or set refresh reduction parameters

bundle-max-size

Set bundle-maximum-size

value

Bundle size in bytes, use zero to disable bundling

Command Mode

- /exec/configure/ip-rsvp

signalling refresh reduction bundle-transmit-time

[no] signalling refresh reduction bundle-transmit-time <msec>

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

reduction

Enable, disable or set refresh reduction parameters

bundle-transmit-time

Set bundle-transmit-time

msec

Bundle transmit time value in msec

Command Mode

- /exec/configure/ip-rsvp

signalling refresh reduction rapid-retransmit

[no] signalling refresh reduction rapid-retransmit

Syntax Description

signalling

Configure RSVP Signalling information

refresh

Configure RSVP signaling refresh parameters

reduction

Enable, disable or set refresh reduction parameters

rapid-retransmit

Rapid-retransmit of RSVP messages

Command Mode

- /exec/configure/ip-rsvp

signing level

{ [ no ] signing level { none | cisco | unsigned } | no signing level }

Syntax Description

no

(Optional) Negate a command or set its defaults

signing

Virtual service package signing settings

level

Package signing level allowed for virtual service installation

none

Most restrictive, don't allow package installation

cisco

Allow only Cisco signed packages

unsigned

Least restrictive, allow unsigned and all signing methods

Command Mode

- /exec/configure/virt-serv-global

site-id

{ site-id <s0> | no site-id }

Syntax Description

no

Negate a command or set its defaults

site-id

site id of the network where switch is deployed

s0

Provide site id

Command Mode

- /exec/configure/callhome

site-of-origin

{ site-of-origin { <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> } } | { no site-of-origin [ { <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> } ] }

Syntax Description

no

Negate a command or set its defaults

site-of-origin

Site of Origin

ext-comm-soo-aa2nn4

Extcommunity number

ext-comm-soo-aa4nn2

Extcommunity number

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-ether

slave ipv4

[no] slave ipv4 <ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

slave

slave

ipv4

ipv4

ip

IPv4 address (A.B.C.D) of slave

Command Mode

- /exec/configure/ptp-ucast-master

sleep

sleep <i0>

Syntax Description

sleep

Sleep for the specified number of seconds

i0

Enter the number of seconds to sleep

Command Mode

- /exec

sleep instance

[no] sleep instance <inst> [ <i0> ] | sleep instance <inst> <i0>

Syntax Description

no

Negate a command or set its defaults

sleep

Sleep for the specified number of seconds

instance

Label with an instance number

inst

Instance number

i0

(Optional) Enter the number of seconds to sleep

Command Mode

- /exec/configure

slot

slot <module> { quoted <quoted-cmd> | <cmd> }

Syntax Description

slot

run commands on specific linecard (or set slot for commands that take optional slot number)

module

the slot number (aka module number)

quoted

enter the command with quotes -> pipe redirection and semi-colon are local

quoted-cmd

the command(s) to run on lc separated by <space> <semi-colon> <space>

cmd

the command(s) to run on lc separated by <space> <semi-colon> <space>

Command Mode

- /exec

smtp-host smtp-port reply-to from

{ smtp-host { <ipv4> | <ipv6> | <host> } [ smtp-port <port> ] | smtp-port <port> | reply-to <reply> | from <from> |

Syntax Description

}

smtp-host

SMTP server host

ipv4

IPV4 address

host

DNS name

smtp-port

(Optional) SMTP server port

port

(Optional) Port for SMTP server

reply-to

Reply to email address

reply

Provide reply-to email address

from

From email address

from

Provide from email address

Command Mode

- /exec/configure/email

snapshot create

snapshot create <snapshot-name> <snapshot-description>

Syntax Description

snapshot

Create/Delete a snapshot

create

Create a snapshot of running state of selected features

snapshot-name

Name of a snapshot

snapshot-description

Description of a snapshot

Command Mode

- /exec

snapshot delete

snapshot delete <snapshot-name>

Syntax Description

snapshot

Create/Delete a snapshot

delete

Delete a single snapshot or all snapshots

snapshot-name

Name of a snapshot

Command Mode

- /exec

snapshot delete ALL

snapshot delete ALL

Syntax Description

snapshot

Create/Delete a snapshot

delete

Delete a single snapshot or all snapshots

ALL

Delete all snapshots present on the switch

Command Mode

- /exec

snapshot section add

snapshot section add <name> <command> <row-id> <key1> [ <key2> ]

Syntax Description

snapshot

Create/Delete a snapshot

section

Add/Delete a snapshot section

add

Add a snapshot section

name

Name of a section

command

show' command to generate XML output

row-id

tag of each row entry of the 'show' XML output

key1

first key to distinguish among row entries with

key2

(Optional) second key to distinguish among row entries with

Command Mode

- /exec

snapshot section delete

snapshot section delete <name>

Syntax Description

snapshot

Create/Delete a snapshot

section

Add/Delete a snapshot section

delete

Delete a snapshot section

name

Name of a section

Command Mode

- /exec

snmp-server aaa-user cache-timeout

[no] snmp-server aaa-user cache-timeout <timeout>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

aaa-user

set duration for which aaa-cached snmp user exists

cache-timeout

timeout for AAA cache

timeout

timeout for which aaa-cached user exists(in secs)

Command Mode

- /exec/configure

snmp-server community

[no] snmp-server community <s0> [ { group <s1> | ro | rw } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

community

set community string and access privs

s0

SNMP community string

group

(Optional) Group to which the community belongs

s1

(Optional) Group to which the community belongs

ro

(Optional) Read-only access with this community string

rw

(Optional) Read-write access with this community string

Command Mode

- /exec/configure

snmp-server community

{ no snmp-server community <community_name> { use-ipv4acl [ <ipv4_acl_name> ] use-ipv6acl [ <ipv6_acl_name> ] | use-ipv4acl [ <ipv4_acl_name> ] | use-ipv6acl [ <ipv6_acl_name> ] } | snmp-server community <community_name> { use-ipv4acl <ipv4_acl_name> use-ipv6acl <ipv6_acl_name> | use-ipv4acl <ipv4_acl_name> | use-ipv6acl <ipv6_acl_name> } }

Syntax Description

no

Negate a command or set its defaults

snmp-server

Configure snmp server

community

set community string and access privs

community_name

SNMP community string

use-ipv4acl

Specify IPv4 ACL, the ACL name specified after must be IPv4 ACL.

ipv4_acl_name

(Optional) IPv4 ACL name to filter snmp requests

use-ipv6acl

Specify IPv6 ACL, the ACL name specified after must be IPv6 ACL.

ipv6_acl_name

(Optional) IPv6 ACL name to filter snmp requests

Command Mode

- /exec/configure

snmp-server community use-acl

[no] snmp-server community <community_name> use-acl <acl_name>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

community

set community string and access privs

community_name

SNMP community string

use-acl

acl name to filter snmp requests

acl_name

acl name to filter snmp requests

Command Mode

- /exec/configure

snmp-server contact

[no] snmp-server contact [ <line> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

contact

modify sysContact

line

(Optional) modify sysContact

Command Mode

- /exec/configure

snmp-server context

[no] snmp-server context <context_name> [ instance <instance-name> ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ topology <topology-name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

context

SNMP context to be mapped

context_name

name of the SNMP context

instance

(Optional) Protocol instance associated with the SNMP context

instance-name

(Optional) Name of the protocol instance

vrf

(Optional) VRF associated with the SNMP context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

topology

(Optional) Topology associated with the SNMP context

topology-name

(Optional) name of the Topology

Command Mode

- /exec/configure

snmp-server context type len val

[no] snmp-server context <context_name> type { vrf | topology | instance | vlan | mst } len <i2> val <i3>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

context

SNMP context to be mapped

context_name

name of the SNMP context

type

type of association to context

instance

Protocol instance associated with the SNMP context

vrf

VRF associated with the SNMP context

topology

Topology associated with the SNMP context

vlan

Vlan id associated with the SNMP context

mst

Mst id associated with the SNMP context

len

Length of value

i2

Length of value

val

Value

i3

Value of variable associated with the SNMP context

Command Mode

- /exec/configure

snmp-server counter cache-enable

[no] snmp-server counter cache-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

counter

Configure port counter configuration

cache-enable

Enable port stats cache

Command Mode

- /exec/configure

snmp-server counter cache enable

[no] snmp-server counter cache enable

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

counter

Configure port counter configuration

cache

port stats cache

enable

enable port stats cache

Command Mode

- /exec/configure

snmp-server counter cache timeout

[no] snmp-server counter cache timeout <timeout>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

counter

Configure port counter configuration

cache

Port stats cache

timeout

Timeout for port stats cache

timeout

Timeout for which cached port stats exists(in secs)

Command Mode

- /exec/configure

snmp-server enable traps

[no] snmp-server enable traps [ <trap_arg> [ <trap_sub_category> + ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

trap_arg

(Optional) Enable __left__ traps

trap_sub_category

(Optional) Enter the trap

Command Mode

- /exec/configure

snmp-server enable traps bgp

[no] snmp-server enable traps bgp [ { state-changes [ <subsystem> + ] } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

bgp

Enable SNMP BGP traps

state-changes

(Optional) Traps for FSM state changes

subsystem

(Optional) subsystem within BGP for SNMP traps

Command Mode

- /exec/configure

snmp-server enable traps bgp cbgp2

[no] snmp-server enable traps bgp cbgp2 [ { state-changes [ <subsystem> + ] } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

bgp

Enable SNMP BGP traps

cbgp2

Enable SNMP CISCO-BGP-MIBv2 traps

state-changes

(Optional) Traps for FSM state changes

subsystem

(Optional) subsystem within BGP for SNMP traps

Command Mode

- /exec/configure

snmp-server enable traps bgp cbgp2 threshold prefix

[no] snmp-server enable traps bgp cbgp2 threshold prefix

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

bgp

Enable SNMP BGP traps

cbgp2

Enable SNMP CISCO-BGP-MIBv2 traps

threshold

Traps for threshold events

prefix

CISCO specific trap for prefix threshold events

Command Mode

- /exec/configure

snmp-server enable traps bgp threshold prefix

[no] snmp-server enable traps bgp threshold prefix

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

bgp

Enable SNMP BGP traps

threshold

Traps for threshold events

prefix

CISCO specific trap for prefix threshold events

Command Mode

- /exec/configure

snmp-server enable traps eigrp

[no] snmp-server enable traps eigrp [ <eigrp-ptag> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

eigrp

Enable SNMP EIGRP traps

eigrp-ptag

(Optional) Process tag

Command Mode

- /exec/configure

snmp-server enable traps ospf

[no] snmp-server enable traps ospf [ <tag> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospf

Enable SNMP OSPF traps

tag

(Optional) Process tag

Command Mode

- /exec/configure

snmp-server enable traps ospf lsa

[no] snmp-server enable traps ospf [ <tag> ] lsa

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospf

Enable SNMP OSPF traps

tag

(Optional) Process tag

lsa

Allow sending LSA traps

Command Mode

- /exec/configure

snmp-server enable traps ospf rate-limit

{ { no snmp-server enable traps ospf [ <tag> ] rate-limit [ <window> <rate> ] } | { snmp-server enable traps ospf [ <tag> ] rate-limit <window> <rate> } }

Syntax Description

no

Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospf

Enable SNMP OSPF traps

tag

(Optional) Process tag

rate-limit

Trap rate limit values

window

(Optional) Rate limit window size in seconds

rate

(Optional) Max number of traps sent in window time

tag

(Optional)

Command Mode

- /exec/configure

snmp-server enable traps ospfv3

[no] snmp-server enable traps ospfv3 [ <tag> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospfv3

Enable SNMP OSPFv3 traps

tag

(Optional) Process tag

Command Mode

- /exec/configure

snmp-server enable traps ospfv3 lsa

[no] snmp-server enable traps ospfv3 [ <tag> ] lsa

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospfv3

Enable SNMP OSPFv3 traps

tag

(Optional) Process tag

lsa

Enable SNMP OSPFv3 LSA traps

Command Mode

- /exec/configure

snmp-server enable traps ospfv3 rate-limit

{ { no snmp-server enable traps ospfv3 [ <tag> ] rate-limit } | { snmp-server enable traps ospfv3 [ <tag> ] rate-limit <swindow> <rate> } }

Syntax Description

no

Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospfv3

Enable SNMP OSPFv3 traps

tag

(Optional) Process tag

rate-limit

Trap rate limit values

swindow

Rate limit window size in seconds

rate

Max number of traps sent in window time

tag

(Optional)

Command Mode

- /exec/configure

snmp-server enable traps storm-control trap-rate

[no] snmp-server enable traps storm-control trap-rate <rate-per-minute>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

storm-control

Enable storm-control traps

trap-rate

Number of traps per minute

rate-per-minute

per Minute (0 means no upper rate)

Command Mode

- /exec/configure

snmp-server engineID local

snmp-server engineID local <engineId> | no snmp-server engineID local [ <engineId> ]

Syntax Description

no

Negate a command or set its defaults

snmp-server

Configure snmp server

engineID

Configure a local SNMPv3 engineID

local

engineID of the local agent

engineId

engine ID should be an even number of hexadecimal characters, which ranges from 10 to 64 where every two hexadecimal characters should be separated by colon. Including colons-

Command Mode

- /exec/configure

snmp-server force-unload-feature

snmp-server force-unload-feature <feature_name>

Syntax Description

snmp-server

Configure snmp server

force-unload-feature

unload mibs of conditional feature forcefully

feature_name

conditional feature name

Command Mode

- /exec/configure

snmp-server globalEnforcePriv

[no] snmp-server globalEnforcePriv

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

globalEnforcePriv

globally enforce privacy for all the users

Command Mode

- /exec/configure

snmp-server host

[no] snmp-server host <host0> { <s6> | [ informs | traps ] { { version { 1 <s0> | 2c <s1> | 3 { auth <s2> | noauth <s3> | priv <s4> } } } | <s5> } } [ udp-port <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

host

Specify hosts to receive SNMP notifications

host0

IPv4 or IPv6 address or DNS Name of SNMP notification host

informs

(Optional) Send Inform messages to this host

traps

(Optional) Send Traps messages to this host

version

SNMP version to use for notification messages

1

Use SNMPv1

s0

SNMP community string or SNMPv3 user name

udp-port

(Optional) The notification host's UDP port number

i1

(Optional) The notification host's UDP port number

2c

Use SNMPv2c

s1

SNMP community string or SNMPv3 user name

3

Use SNMPv3

auth

Use the SNMPv3 authNoPriv Security Level

s2

SNMP community string or SNMPv3 user name

noauth

Use the SNMPv3 noAuthNoPriv Security Level

s3

SNMP community string or SNMPv3 user name

priv

Use the SNMPv3 authPriv Security Level

s4

SNMP community string or SNMPv3 user name

s5

SNMP community string or SNMPv3 user name

s6

SNMP community string or SNMPv3 user name

Command Mode

- /exec/configure

snmp-server host filter-vrf

[no] snmp-server host <host0> filter-vrf { <vrf-name> | <vrf-known-name> } [ udp-port <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

host

Specify hosts to receive SNMP notifications

host0

IPv4 or IPv6 address or DNS Name of SNMP notification host

filter-vrf

Filters notifications to the notification host receiver based on the configured VRF

vrf-name

VRF name

vrf-known-name

Known VRF name

udp-port

(Optional) The notification host's UDP port number

i1

(Optional) The notification host's UDP port number

Command Mode

- /exec/configure

snmp-server host source

[no] snmp-server host <host0> { source-interface <ifName> } [ udp-port <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

host

Specify hosts to send SNMP notifications

host0

IPv4 or IPv6 address or DNS Name of SNMP notification host

source-interface

Source interface to be used for sending out SNMP notifications to this host

ifName

Source interface name

udp-port

(Optional) The notification host's UDP port number

i1

(Optional) The notification host's UDP port number

Command Mode

- /exec/configure

snmp-server host use-vrf

[no] snmp-server host <host0> use-vrf { <vrf-name> | <vrf-known-name> } [ udp-port <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

host

Specify hosts to receive SNMP notifications

host0

IPv4 or IPv6 address or DNS Name of SNMP notification host

use-vrf

Configures SNMP to use the selected VRF to communicate with the host receiver

vrf-name

VRF name

vrf-known-name

Known VRF name

udp-port

(Optional) The notification host's UDP port number

i1

(Optional) The notification host's UDP port number

Command Mode

- /exec/configure

snmp-server host use_vrf

[no] snmp-server host <host0> { use_vrf <s0> | filter_vrf <s1> } [ udp-port <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

host

Specify hosts to receive SNMP notifications

host0

IPv4 or IPv6 address or DNS Name of SNMP notification host

use_vrf

Configures SNMP to use the selected VRF to communicate with the host receiver

s0

VRF name

filter_vrf

Filters notifications to the notification host receiver based on the configured VRF

s1

VRF name

udp-port

(Optional) The notification host's UDP port number

i1

(Optional) The notification host's UDP port number

Command Mode

- /exec/configure

snmp-server load-cond-feature

[no] snmp-server load-cond-feature <feature_name>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

load-cond-feature

load or unload mibs of conditional feature

feature_name

conditional feature name

Command Mode

- /exec/configure

snmp-server load-mib

[no] snmp-server load-mib <mib_name>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

load-mib

load a given mib

mib_name

mib module name

Command Mode

- /exec/configure

snmp-server location

[no] snmp-server location [ <line> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

location

modify sysLocation

line

(Optional) modify sysLocation

Command Mode

- /exec/configure

snmp-server mib community-map context

[no] snmp-server mib community-map <community_name> context <context_name>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

mib

mib access parameters

community-map

SNMP community

community_name

SNMP community string

context

SNMP context to be mapped

context_name

name of the SNMP context

Command Mode

- /exec/configure

snmp-server mib mpls vpn max-threshold

[no] snmp-server mib mpls vpn max-threshold <time>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Modify non engine SNMP parameters

mib

MIB commands

mpls

Configurations for MPLS mibs

vpn

Config special SNMP MPLS VPN objects

max-threshold

Config to control MPLS-VPN max threshold exceeded traps

time

Seconds before re-issuing maximum threshold trap

Command Mode

- /exec/configure

snmp-server protocol enable

[no] snmp-server protocol enable

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

protocol

snmp protocol operations

enable

Enable/Disable snmp protocol operations

Command Mode

- /exec/configure

snmp-server source-interface informs

[no] snmp-server source-interface { informs } <ifName>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

source-interface

Source interface to be used for sending out SNMP notifications

ifName

Source interface name

informs

SNMP Inform notifications for which this source interface needs to be used

Command Mode

- /exec/configure

snmp-server source-interface traps

[no] snmp-server source-interface { traps } <ifName>

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

source-interface

Source interface to be used for sending out SNMP notifications

ifName

Source interface name

traps

SNMP Trap notifications for which this source interface needs to be used

Command Mode

- /exec/configure

snmp-server system-shutdown

[no] snmp-server system-shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

system-shutdown

Configure snmp-server for reload(2)

Command Mode

- /exec/configure

snmp-server tcp-session

[no] snmp-server tcp-session [ auth ]

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

tcp-session

Enable one time authentication for snmp over tcp session.

auth

(Optional) Enable one time authentication for snmp over tcp session.

Command Mode

- /exec/configure

snmp-server user

[no] snmp-server user <s0> { enforcePriv | { [ <s1> ] { [ auth { md5 | sha } <s2> { { priv [ aes-128 ] { <s3> [ localizedkey ] [ { auto | engineID <s4> } ] } } | { [ localizedkey1 ] [ { auto1 | engineID1 <s5> } ] } } ] } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp-server

Configure snmp server

user

Define a user who can access the SNMP engine

s0

Name of the user

enforcePriv

Enforce privacy for the user

s1

(Optional) Group name (ignored for notif target user)

auth

(Optional) authentication parameters for the user

md5

(Optional) Use HMAC MD5 algorithm for authentication

sha

(Optional) Use HMAC SHA algorithm for authentication

s2

(Optional) authentication password for user

priv

(Optional) encryption parameters for the user

aes-128

(Optional) Use 128-bit AES algorithm for privacy

s3

(Optional) privacy password for user

localizedkey

(Optional) specifies whether the passwords are in localized key format

auto

(Optional) specifies whether the user is auto created (volatile)

engineID

(Optional) engineID for configuring notif target user (for V3 informs)

s4

(Optional) Specifies notification target's SNMP engineID.Should be an octet of either Decimal (range: 0 to 255) or Hexadecimal(range: 0 to FF) value, each octet being separated by colon. Hexadecimal value should have prefix of 0x or 0X. Including colons-

localizedkey1

(Optional) specifies whether the passwords are in localized key format

auto1

(Optional) specifies whether the user is auto created (volatile)

engineID1

(Optional) engineID for configuring notif target user (for V3 informs)

s5

(Optional) Specifies notification target's SNMP engineID.Should be an octet of either Decimal (range: 0 to 255) or Hexadecimal(range: 0 to FF) value, each octet being separated by colon. Hexadecimal value should have prefix of 0x or 0X. Including colons-

Command Mode

- /exec/configure

snmp-server user

{ no snmp-server user <user_name> { use-ipv4acl [ <ipv4_acl_name> ] use-ipv6acl [ <ipv6_acl_name> ] | use-ipv4acl [ <ipv4_acl_name> ] | use-ipv6acl [ <ipv6_acl_name> ] } | snmp-server user <user_name> { use-ipv4acl <ipv4_acl_name> use-ipv6acl <ipv6_acl_name> | use-ipv4acl <ipv4_acl_name> | use-ipv6acl <ipv6_acl_name> } }

Syntax Description

no

Negate a command or set its defaults

snmp-server

Configure snmp server

user

Define a user who can access the SNMP engine

user_name

Name of the user

use-ipv4acl

Specify IPv4 ACL, the ACL name specified after must be IPv4 ACL.

ipv4_acl_name

(Optional) IPv4 ACL name to filter snmp requests

use-ipv6acl

Specify IPv6 ACL, the ACL name specified after must be IPv6 ACL.

ipv6_acl_name

(Optional) IPv6 ACL name to filter snmp requests

Command Mode

- /exec/configure

snmp-trap event-type policy-name

snmp-trap [ intdata1 <integer-data1> ] [ intdata2 <integer-data2> ] [ strdata <string-data> ] event-type <ev_type> policy-name <name>

Syntax Description

snmp-trap

Send

intdata1

(Optional) Enter

integer-data1

(Optional) Integer

intdata2

(Optional) Enter

integer-data2

(Optional) Integer

strdata

(Optional) Enter

string-data

(Optional) String

event-type

Event type

ev_type

Event type

policy-name

Policy Name

name

Policy Name

Command Mode

- /exec

snmp ifmib ifalias long

[no] snmp ifmib ifalias long

Syntax Description

no

(Optional) Negate a command or set its defaults

snmp

Configure snmp

ifmib

Configure snmp interface mib feature

ifalias

Configure snmp interface alias attribute for interface mib

long

Enable long description up to 256 characters for interface alias

Command Mode

- /exec/configure

snmp trap link-status

snmp trap link-status

Syntax Description

snmp

Modify SNMP interface parameters

trap

Allow a specific SNMP trap

link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel /exec/configure/if-port-channel-range

snmp trap link-status

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command or set its defaults

snmp

Modify SNMP interface parameters

trap

Allow a specific SNMP trap

link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Mode

- /exec/configure/if-ether-sub /exec/configure/if-port-channel-sub /exec/configure/if-gig-ether-sub /exec/configure/if-remote-ethernet-sub /exec/configure/if-ether-sub-p2p

snmp trap link-status

[no] snmp trap link-status

Syntax Description

no

Negate a command or set its defaults

snmp

Modify SNMP interface parameters

trap

Allow a specific SNMP trap

link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel /exec/configure/if-port-channel-range

snmp trap link-status

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command or set its defaults

snmp

Modify SNMP interface parameters

trap

Allow a specific SNMP trap

link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Mode

- /exec/configure/if-mgmt-ether

snmp trap link-status

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command

snmp

Modify SNMP interface parameters

trap

Allow a specific SNMP trap

link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Mode

- /exec/configure/if-any-tunnel

snmp trap link-status

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command or set its defaults

snmp

Modify SNMP interface parameters

trap

Allow a specific SNMP trap

link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Mode

- /exec/configure/if-vlan-common

snsr-grp sample-interval

snsr-grp <sn-grp-id> sample-interval <cadence> | no snsr-grp <sn-grp-id>

Syntax Description

no

Negate a command or set its defaults

snsr-grp

Associated sensor group

sample-interval

Cadence Time in milliseconds(0 for events)

sn-grp-id

Identifier

cadence

Cadence Time in milliseconds

Command Mode

- /exec/configure/telemetry/subscription

sockets local-port-range

{ { no sockets local-port-range } | { sockets local-port-range <start-port> <end-port> } }

Syntax Description

no

Negate a command or set its defaults

sockets

Negate a command or set its defaults

local-port-range

Define local port range for Kstack. Note: This CLI requires switch to be reloaded

start-port

Start port of local port range

end-port

End port of local port range

Command Mode

- /exec/configure /exec/configure/config-mgmt

soft-reconfiguration inbound

{ soft-reconfiguration inbound [ always ] } | { no soft-reconfiguration inbound } | { default soft-reconfiguration inbound }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

soft-reconfiguration

Soft reconfiguration

inbound

Allow inbound soft reconfiguration

always

(Optional) Always perform inbound soft reconfiguration

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

soft-reconfiguration inbound

{ soft-reconfiguration inbound [ always ] } | { no soft-reconfiguration inbound } | { default soft-reconfiguration inbound }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

soft-reconfiguration

Soft reconfiguration

inbound

Allow inbound soft reconfiguration

always

(Optional) Always perform inbound soft reconfiguration

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

soo auto

{ [ no ] soo { auto | <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> } } | { default soo }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

Inherit values from a peer template

soo

Specify Site-of-origin extcommunity

auto

Generate SOO automatically

ext-comm-soo-aa4nn2

VPN extcommunity in aa4:nn or ip:nn format

ext-comm-soo-aa2nn4

VPN extcommunity in aa:nn format

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

sort

| sort [ -b | -d | -f | -g | -i | -M | -n | -r | -k <key> | -t <delim> | -u ] +

Syntax Description

|

Pipe command output to filter

sort

Stream Sorter

-b

(Optional) ignore leading blanks

-d

(Optional) consider only blanks and alphanumeric characters

-f

(Optional) fold lower case to upper case characters

-g

(Optional) compare according to general numerical value

-i

(Optional) consider only printable characters

-M

(Optional) month sort

-n

(Optional) compare according to string numerical value

-r

(Optional) reverse the result of comparisons

-k

(Optional) provide a key

-t

(Optional) use different separator instead of non-blank to blank transition

-u

(Optional) remove duplicate lines

key

(Optional) key in format POS1[,POS2] with POS = <field-nb>[.<char-pos>][<ordering>]

delim

(Optional) field delimiter char

Command Mode

- /output

source-group

[no] source-group <source> <group>

Syntax Description

no

(Optional) Negate a command or set its defaults

source-group

Source Group

source

Configure source address

group

Configure group address

Command Mode

- /exec/configure/if-nve

source-interface

[no] source-interface | source-interface <interface>

Syntax Description

no

Negate a command or set its defaults

source-interface

Source interface to be used to reach radius server

interface

Interface (default is mgmt)

Command Mode

- /exec/configure/radius

source-interface

source-interface <interface> | no source-interface

Syntax Description

no

Negate a command or set its defaults

source-interface

NVE Source-Interface

interface

Command Mode

- /exec/configure/if-nve

source-interface

[no] source-interface | source-interface <interface>

Syntax Description

no

Negate a command or set its defaults

source-interface

Source interface to be used to reach tacacs server

interface

Interface (default is mgmt)

Command Mode

- /exec/configure/tacacs+

source-interface hold-down-time

[no] source-interface hold-down-time <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

source-interface

NVE Source-Interface

hold-down-time

Hold source loopback down time

sec

time in seconds

Command Mode

- /exec/configure/if-nve

source

source { <ipaddr> } | no source

Syntax Description

no

Negate a command or set its defaults

source

source of tunnel packets

ipaddr

ip address (A.B.C.D)

Command Mode

- /exec/configure/if-te

source

{ [ no ] source <intf> | no source }

Syntax Description

source

Source Interface for this destination

intf

Interface

Command Mode

- /exec/configure/nfm-exporter

source

source [ background ] <file> [ <args> ] +

Syntax Description

source

run a script (python, tcl,...) from bootflash:scripts

background

(Optional) run the script in the background, see also 'show background' and 'kill background

file

the script file to run

args

(Optional) argument to be passed to script

Command Mode

- /exec

source

| source <file> [ <args> ] +

Syntax Description

|

Pipe command output to filter

source

run a script (python, tcl,...) from bootflash:scripts

file

the script file to run

args

(Optional) argument to be passed to script

Command Mode

- /output

source copy-sys

source copy-sys

Syntax Description

source

run a script (python, tcl,...) from bootflash:scripts

copy-sys

copy the system provided example scripts of /sys to bootflash:scripts

Command Mode

- /exec

source forward-drops

[no] source forward-drops <src_dir> [ priority-low ]

Syntax Description

no

(Optional) Negate a command or set its defaults

source

Source configuration

forward-drops

Forwarding drops

priority-low

(Optional) Drop span session is low priority relative to span acl and vlan sessions

src_dir

Source direction

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

source interface

[no] source { interface <interface> } [ <src_dir> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

source

Source configuration

interface

Configure interfaces

interface

src_dir

(Optional) Source direction

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

source interface

[no] source { interface <interface_range> } [ <src_dir> ] [ allow-pfc ]

Syntax Description

no

(Optional) Negate a command or set its defaults

source

Source configuration

interface

Configure interfaces

interface_range

src_dir

(Optional) Source direction

allow-pfc

(Optional) Enable SPAN on PFC frames

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

source ip

[no] source ip <ipaddress>

Syntax Description

no

(Optional) Negate a command or set its defaults

source

Source IP address configuration

ip

Configure source IP address

ipaddress

Command Mode

- /exec/configure/config-monitor-erspan-dst

source proxy-layer2-gateway tree-id switchid tx

[no] source proxy-layer2-gateway tree-id <tree-id> switchid <switchid> tx

Syntax Description

no

(Optional) Negate a command or set its defaults

source

Source configuration

proxy-layer2-gateway

proxy layer2 gateway span, only in egress direction

tree-id

Tree-ID integer

tree-id

treeid

switchid

Switchid integer

switchid

switchid

tx

Proxy layer2 gateway is only egress

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

source vlan

[no] source vlan <vlan_range> [ <src_dir> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

source

Source configuration

vlan

Vlan type

vlan_range

src_dir

(Optional) Source direction

Command Mode

- /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

spanning-tree bpdufilter

spanning-tree bpdufilter <port-bpdufilter> | no spanning-tree bpdufilter [ <port-bpdufilter> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

bpdufilter

Don't send or receive BPDUs on this interface

port-bpdufilter

Don't send or receive BPDUs on this interface

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree bpduguard

spanning-tree bpduguard <port-bpduguard> | no spanning-tree bpduguard [ <port-bpduguard> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

bpduguard

Don't accept BPDUs on this interface

port-bpduguard

Don't accept BPDUs on this interface

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree bridge-domain

[no] spanning-tree bridge-domain <bd-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

bridge-domain

Bridge-Domain Switch Spanning Trees

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

Command Mode

- /exec/configure

spanning-tree bridge assurance

[no] spanning-tree bridge assurance

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

bridge

Spanning tree bridge options

assurance

Enable Bridge Assurance on all network ports

Command Mode

- /exec/configure

spanning-tree cost

spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] cost <port-cost> | no spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] cost [ <port-cost> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

cost

Change an interface's spanning tree port path cost

port-cost

port path cost

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree cost auto

[no] spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] cost auto

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

cost

Change an interface's spanning tree port path cost

auto

Determine cost based on media speed of this interface

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree domain

spanning-tree domain { enable | disable | <domain-id> } | no spanning-tree domain [ enable ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

domain

Spanning Tree Domain

enable

Enable Spanning Tree Domain

disable

Disable Spanning Tree Domain

domain-id

Domain Identifier

Command Mode

- /exec/configure

spanning-tree domain clear statistics

spanning-tree domain clear statistics

Syntax Description

spanning-tree

Spanning Tree Subsystem

domain

Spanning Tree Domain

clear

Clear

statistics

Clear Statistics

Command Mode

- /exec/configure

spanning-tree fcoe

[no] spanning-tree fcoe

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

fcoe

Enable STP for FCoE VLANs

Command Mode

- /exec/configure

spanning-tree guard

spanning-tree guard <guard-type> | no spanning-tree guard [ <guard-type> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

guard

Change an interface's spanning tree guard mode

guard-type

Change an interface's spanning tree guard mode

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree lc-issu

spanning-tree lc-issu <issu-type> | no spanning-tree lc-issu [ <issu-type> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

lc-issu

Configure Linecard ISSU type

issu-type

ISSU Type

Command Mode

- /exec/configure

spanning-tree lc-issu

spanning-tree lc-issu <port-issu-type> | no spanning-tree lc-issu [ <port-issu-type> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

lc-issu

Configure Linecard ISSU type

port-issu-type

ISSU Type

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree link-type

spanning-tree link-type <link-type-val> | no spanning-tree link-type [ <link-type-val> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

link-type

Specify a link type for spanning tree tree protocol use

link-type-val

Specify a link type for spanning tree tree protocol use

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree loopguard default

[no] spanning-tree loopguard default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

loopguard

Spanning tree loopguard options

default

Enable loopguard by default on all ports

Command Mode

- /exec/configure

spanning-tree mode

spanning-tree mode <stp-mode> | no spanning-tree mode [ <stp-mode> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mode

Spanning Tree operating mode

stp-mode

Spanning Tree operating mode

Command Mode

- /exec/configure

spanning-tree mst configuration

spanning-tree mst configuration

Syntax Description

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

configuration

Enter MST configuration submode

Command Mode

- /exec/configure

spanning-tree mst configuration

[no] spanning-tree mst configuration

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

configuration

Enter MST configuration submode

Command Mode

- /exec/configure

spanning-tree mst cost

spanning-tree mst <mst-id> cost <port-cost> | no spanning-tree mst <mst-id> cost [ <port-cost> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree

mst-id

MST instance list, example 0,2-4,6,8-12

cost

Change an interface's spanning tree port path cost

port-cost

port path cost

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree mst cost auto

[no] spanning-tree mst <mst-id> cost auto

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree

mst-id

MST instance list, example 0,2-4,6,8-12

cost

Change an interface's spanning tree port path cost

auto

Determine cost based on media speed of this interface

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree mst forward-time

spanning-tree mst forward-time <fwd-time> | no spanning-tree mst forward-time [ <fwd-time> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

forward-time

Set the forward delay for the spanning tree

fwd-time

number of seconds for the forward delay timer

Command Mode

- /exec/configure

spanning-tree mst hello-time

spanning-tree mst hello-time <hello-time-val> | no spanning-tree mst hello-time [ <hello-time-val> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

hello-time

Set the hello interval for the spanning tree

hello-time-val

number of seconds between generation of config bpdu

Command Mode

- /exec/configure

spanning-tree mst max-age

spanning-tree mst max-age <max-age-val> | no spanning-tree mst max-age [ <max-age-val> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

max-age

Set the max age interval for the spanning tree

max-age-val

maximum number of seconds the information in a bpdu is valid

Command Mode

- /exec/configure

spanning-tree mst max-hops

spanning-tree mst max-hops <max-hops-val> | no spanning-tree mst max-hops [ <max-hops-val> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

max-hops

Set the max hops value for the spanning tree

max-hops-val

maximum number of hops a BPDU is valid

Command Mode

- /exec/configure

spanning-tree mst port-priority

spanning-tree mst <mst-id> port-priority <port-prio> | no spanning-tree mst <mst-id> port-priority [ <port-prio> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree

mst-id

MST instance list, example 0,2-4,6,8-12

port-priority

Change an interface's spanning tree port priority

port-prio

Spanning-tree port priority

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree mst pre-standard

[no] spanning-tree mst pre-standard

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree

pre-standard

Force pre-standard MST BPDU transmission on port

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree mst priority

spanning-tree mst <mst-id> priority <prio> | no spanning-tree mst <mst-id> priority [ <prio> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

mst-id

MST instance range, example: 0-3,5,7-9

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096

Command Mode

- /exec/configure

spanning-tree mst root

spanning-tree mst <mst-id> root <root-type> [ diameter <diameter-val> [ hello-time <hello-time-val> ] ] | no spanning-tree mst <mst-id> root [ <root-type> [ diameter <diameter-val> [ hello-time <hello-time-val> ] ] ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

mst-id

MST instance range, example: 0-3,5,7-9

diameter

(Optional) Network diameter of this spanning tree

diameter-val

(Optional) Maximum number of bridges between any two end nodes

root

configure switch as root

root-type

configure switch as root

hello-time

(Optional) Set the hello interval for the spanning tree

hello-time-val

(Optional) number of seconds between generation of config bpdu

Command Mode

- /exec/configure

spanning-tree mst simulate pvst

[no] spanning-tree mst simulate pvst [ <simpvst-disable> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree

simulate

Enable spanning tree simulation

pvst

Enable PVST simulation

simpvst-disable

(Optional) Disable PVST simulation on this interface

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree mst simulate pvst global

[no] spanning-tree mst simulate pvst global

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

simulate

Enable spanning tree simulation

pvst

Enable PVST simulation

global

Enable PVST Simulation by default on all ports

Command Mode

- /exec/configure

spanning-tree pathcost method

spanning-tree pathcost method <method-val> | no spanning-tree pathcost method [ <method-val> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

pathcost

Spanning tree pathcost options

method

Method to calculate default port path cost

method-val

Method to calculate default port path cost

Command Mode

- /exec/configure

spanning-tree port-priority

spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] port-priority <port-prio> | no spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] port-priority [ <port-prio> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

port-priority

Change an interface's spanning tree port priority

port-prio

Spanning-tree port priority

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree port type

spanning-tree port type <port-type> | no spanning-tree port type [ <port-type> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options

type

Specify a port type for spanning tree protocol use

port-type

Specify a port type for spanning tree protocol use

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree port type edge bpdufilter default

[no] spanning-tree port type edge bpdufilter default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options

type

Specify a port type for spanning tree protocol use

edge

Consider the interface as edge port (enable portfast)

bpdufilter

Enable edge port (portfast) bpdu filter on this switch

default

Enable bdpu filter by default on all edge (portfast) ports

Command Mode

- /exec/configure

spanning-tree port type edge bpduguard default

[no] spanning-tree port type edge bpduguard default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options

type

Specify a port type for spanning tree protocol use

edge

Consider the interface as edge port (enable portfast)

bpduguard

Enable edge port (portfast) bpdu guard on this switch

default

Enable bdpu guard by default on all edge (portfast) ports

Command Mode

- /exec/configure

spanning-tree port type edge default

[no] spanning-tree port type edge default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options

type

Specify a port type for spanning tree protocol use

edge

Consider the interface as edge port (enable portfast)

default

Select edge port type by default on all access ports

Command Mode

- /exec/configure

spanning-tree port type edge trunk

spanning-tree port type edge trunk | no spanning-tree port type edge trunk

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options

type

Specify a port type for spanning tree protocol use

edge

Consider the interface as edge port (enable portfast)

trunk

Consider the interface as edge port (enable portfast) even in trunk mode

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree port type network default

[no] spanning-tree port type network default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options

type

Specify a port type for spanning tree protocol use

network

Consider the interface as inter-switch link

default

Select network port type by default on all ports

Command Mode

- /exec/configure

spanning-tree portfast

spanning-tree portfast [ <port-portfast> ] | no spanning-tree portfast [ <port-portfast> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up

port-portfast

(Optional) Enable an interface to move directly to fwd on link up

Command Mode

- /exec/configure/if-switching /exec/configure/if-ethernet-switch-m

spanning-tree portfast bpdufilter default

[no] spanning-tree portfast bpdufilter default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up

bpdufilter

Enable portfast bpdu filter on this switch

default

Enable bdpu filter by default on all portfast ports

Command Mode

- /exec/configure

spanning-tree portfast bpduguard default

[no] spanning-tree portfast bpduguard default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up

bpduguard

Enable portfast bpdu guard on this switch

default

Enable bdpu guard by default on all portfast ports

Command Mode

- /exec/configure

spanning-tree portfast default

[no] spanning-tree portfast default

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up

default

Enable portfast by default on all access ports

Command Mode

- /exec/configure

spanning-tree pseudo-information

spanning-tree pseudo-information

Syntax Description

spanning-tree

Spanning Tree Subsystem

pseudo-information

configure spanning tree pseudo information

Command Mode

- /exec/configure

spanning-tree vlan

[no] spanning-tree vlan <vlan-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

Command Mode

- /exec/configure

spanning-tree vlan forward-time

spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } forward-time <fwd-time> | no spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } forward-time [ <fwd-time> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

forward-time

Set the forward delay for the spanning tree

fwd-time

number of seconds for the forward delay timer

Command Mode

- /exec/configure

spanning-tree vlan hello-time

spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } hello-time <hello-time-val> | no spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } hello-time [ <hello-time-val> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

hello-time

Set the hello interval for the spanning tree

hello-time-val

number of seconds between generation of config bpdu

Command Mode

- /exec/configure

spanning-tree vlan max-age

spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } max-age <max-age-val> | no spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } max-age [ <max-age-val> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

max-age

Set the max age interval for the spanning tree

max-age-val

maximum number of seconds the information in a bpdu is valid

Command Mode

- /exec/configure

spanning-tree vlan priority

spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } priority <prio> | no spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } priority [ <prio> ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096

Command Mode

- /exec/configure

spanning-tree vlan root

spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } root <root-type> [ diameter <diameter-val> [ hello-time <hello-time-val> ] ] | no spanning-tree { vlan <vlan-id> | bridge-domain <bd-id> } root [ <root-type> [ diameter <diameter-val> [ hello-time <hello-time-val> ] ] ]

Syntax Description

no

Negate a command or set its defaults

spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

diameter

(Optional) Network diameter of this spanning tree

diameter-val

(Optional) Maximum number of bridges between any two end nodes

root

configure switch as root

root-type

configure switch as root

hello-time

(Optional) Set the hello interval for the spanning tree

hello-time-val

(Optional) number of seconds between generation of config bpdu

Command Mode

- /exec/configure

speed-group

speed-group <gspeed_val> | no speed-group [ <gspeed_val> ]

Syntax Description

no

Negate a command or set its defaults

speed-group

port group speed

gspeed_val

Interface port speed

Command Mode

- /exec/configure/if-eth-base

speed

speed { <speed_val> }

Syntax Description

speed

Enter the port speed

speed_val

Interface port speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

speed

speed { <speed_val> }

Syntax Description

speed

Enter the port speed

speed_val

Interface port speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

speed

[no] speed [ { <speed_val> | auto [ 100 [ 1000 ] ] } ]

Syntax Description

no

Negate a command or set its defaults

speed

Enter the port speed

speed_val

(Optional) Interface port speed

auto

(Optional) auto negotiate speed

100

(Optional) 100 Mbps speed

1000

(Optional) 1000 Mbps speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

speed

[no] speed [ { <speed_val> | auto [ 100 [ 1000 ] ] } ]

Syntax Description

no

Negate a command or set its defaults

speed

Enter the port speed

speed_val

(Optional) Interface port speed

auto

(Optional) auto negotiate speed

100

(Optional) 100 Mbps speed

1000

(Optional) 1000 Mbps speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

speed

speed { <speed_val> }

Syntax Description

speed

Enter the port speed

speed_val

Interface port speed

Command Mode

- /exec/configure/if-mgmt-ether

speed

[no] speed [ { <speed_val> | auto [ 100 [ 1000 ] ] } ]

Syntax Description

no

Negate a command or set its defaults

speed

Enter the port speed

speed_val

(Optional) Interface port speed

auto

(Optional) auto negotiate speed

100

(Optional) 100 Mbps speed

1000

(Optional) 1000 Mbps speed

Command Mode

- /exec/configure/if-mgmt-ether

speed

[no] speed <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

speed

Set the transmit and receive speeds

i0

Transmit and receive speeds

Command Mode

- /exec/configure/com1

speed

[no] speed <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

speed

Set the transmit and receive speeds

i0

Transmit and receive speeds

Command Mode

- /exec/configure/console

speed auto

speed auto

Syntax Description

speed

Enter the port speed

auto

auto negotiate speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

speed auto 100

speed auto 100

Syntax Description

speed

Enter the port speed

auto

auto negotiate speed

100

100 Mbps speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

speed auto 100 1000

speed auto 100 1000

Syntax Description

speed

Enter the port speed

auto

auto negotiate speed

100

100 Mbps speed

1000

1000 Mbps speed

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

speed auto 100 1000

speed auto 100 1000

Syntax Description

speed

Enter the port speed

auto

auto negotiate speed

100

100 Mbps speed

1000

1000 Mbps speed

Command Mode

- /exec/configure/if-mgmt-ether

speed auto 100

speed auto 100

Syntax Description

speed

Enter the port speed

auto

auto negotiate speed

100

100 Mbps speed

Command Mode

- /exec/configure/if-mgmt-ether

speed auto

speed auto

Syntax Description

speed

Enter the port speed

auto

auto negotiate speed

Command Mode

- /exec/configure/if-mgmt-ether

spf-interval

spf-interval <max-wait> [ <initial-wait> <second-wait> ] | no spf-interval <max-wait> [ <initial-wait> <second-wait> ]

Syntax Description

no

Negate a command or set its defaults

spf-interval

Configure SPF interval

max-wait

Maximum wait between trigger and SPF computation (milli-secs)

initial-wait

(Optional) Initial wait between trigger and SPF computation (milli-secs)

second-wait

(Optional) Second wait between trigger and SPF computation (milli-secs)

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

spf-interval

spf-interval <level> <max-wait> [ <initial-wait> <second-wait> ] | no spf-interval <level> <max-wait> [ <initial-wait> <second-wait> ]

Syntax Description

no

Negate a command or set its defaults

spf-interval

Configure SPF interval

level

IS-IS level

max-wait

Maximum wait between trigger and SPF computation (milli-secs)

initial-wait

(Optional) Initial wait between trigger and SPF computation (milli-secs)

second-wait

(Optional) Second wait between trigger and SPF computation (milli-secs)

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

spf-interval

spf-interval <max-wait> [ <initial-wait> <second-wait> ] | no spf-interval <max-wait> [ <initial-wait> <second-wait> ]

Syntax Description

no

Negate a command or set its defaults

spf-interval

Configure SPF interval

max-wait

Maximum wait between trigger and SPF computation (milli-secs)

initial-wait

(Optional) Initial wait between trigger and SPF computation (milli-secs)

second-wait

(Optional) Second wait between trigger and SPF computation (milli-secs)

Command Mode

- /exec/configure/otv-isis/otv-isis-vrf-common

spf mode incremental

[no] spf mode incremental

Syntax Description

no

(Optional) Negate a command or set its defaults

spf

Configure route computation related settings

mode

Set the mode of spf computation

incremental

If possible, recompute only parts of the SPT

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

spf mode incremental

[no] spf mode incremental

Syntax Description

no

(Optional) Negate a command or set its defaults

spf

Configure route computation related settings

mode

Set the mode of spf computation

incremental

If possible, recompute only parts of the SPT

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

sport

{ sport <sval> } | { no sport }

Syntax Description

no

Negate a command or set its defaults

sport

Configure ngoam Udp source port range

sval

Udp source port range, max span 1024, Example: 2000-3000,400,500

Command Mode

- /exec/configure/configngoamprofile

sprom backplane

sprom { backplane [ brief ] }

Syntax Description

sprom

set SPROM contents should be done very carefully

backplane

set backplane module sprom contents

brief

(Optional) set minimal/essential backplane module sprom contents

Command Mode

- /exec

sprom recover backplane

sprom recover backplane <i0>

Syntax Description

sprom

set SPROM contents should be done very carefully

recover

SPROM recovery

backplane

set backplane module sprom contents

i0

please enter instance of backplane sprom

Command Mode

- /exec

ssh

{ ssh <s0> [ [ [ vrf { <vrf-name> | <vrf-known-name> } ] [ source-ip <s1> ] ] | [ source-interface <intf> ] ] } | { ssh <s0> [ [ [ source-ip <s1> ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] | [ source-interface <intf> ] ] }

Syntax Description

ssh

SSH to another system

vrf

(Optional) Display per-VRF information

source-ip

(Optional) ip address to bind

source-interface

(Optional) Select source interface

s0

Enter hostname or user@hostname

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

s1

(Optional) Enter source ip address to bind

intf

(Optional)

Command Mode

- /exec

ssh6

{ ssh6 <s0> [ [ [ vrf { <vrf-name> | <vrf-known-name> } ] [ source-ip <s2> ] [ interface <s1> ] ] | [ source-interface <intf> ] ] } | { ssh6 <s0> [ [ [ source-ip <s2> ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ interface <s1> ] ] | [ source-interface <intf> ] ] }

Syntax Description

ssh6

SSH to another system using IPv6 addressing

vrf

(Optional) vrf to use

source-ip

(Optional) ip address to bind

source-interface

(Optional) Select source interface

interface

(Optional) interface to bind

s0

Enter hostname or user@hostname

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

s2

(Optional) Enter source ip address to bind

s1

(Optional) Enter interface to bind

intf

(Optional)

Command Mode

- /exec

ssh cipher-mode weak

{ { ssh cipher-mode weak } | { no ssh cipher-mode [ weak ] } }

Syntax Description

no

Negate a command or set its defaults

ssh

SSH to another system

cipher-mode

Set Cipher-mode for ssh

weak

Enable Weak Ciphers

Command Mode

- /exec/configure/

ssh key dsa

{ ssh key { dsa [ force ] | rsa [ { <i0> | <oldrange> } [ force ] ] } | no ssh key [ { dsa [ force ] | rsa [ { <i0> | <oldrange> } [ force ] ] } ] }

Syntax Description

no

Negate a command or set its defaults

ssh

SSH to another system

key

Generate SSH Key

dsa

Generate DSA keys

force

(Optional) Force the generation of keys even if previous ones are present

rsa

Generate RSA keys

i0

(Optional) Enter number of bits (in multiples of 8)

oldrange

(Optional) Enter number of bits

force

(Optional) Force the generation of keys even if previous ones are present

force

(Optional) Force the generation of keys even if previous ones are present

Command Mode

- /exec/configure

ssh login-attempts

{ { ssh login-attempts <d0> } | { no ssh login-attempts [ <d0> ] } }

Syntax Description

no

Negate a command or set its defaults

ssh

SSH to another system

login-attempts

Set maximum login attempts from ssh

d0

Specify max-attempt number

Command Mode

- /exec/configure/

ssh server enable

[no] ssh server enable

Syntax Description

no

(Optional) Negate a command or set its defaults

ssh

Configure SSH parameters

server

Configure SSH Server parameters

enable

Enable SSH server

Command Mode

- /exec/configure

staggered adjacency-bringup

[no] staggered adjacency-bringup

Syntax Description

no

(Optional) Negate a command or set its defaults

staggered

Enable staggered adjacency feature

adjacency-bringup

Configure staggered adjacency bringup

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

staggered adjacency-count

[no] staggered adjacency-count <count>

Syntax Description

no

(Optional) Negate a command or set its defaults

staggered

Enable staggered adjacency feature

adjacency-count

Configure the number of adjacencies to bringup at a time

count

Set the number

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

standby

[no] standby [ ip <ip-addr-first> | IPv6 <ip-addrv6-first> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

standby

Standby node

ip

(Optional) ip address for standby node

ip-addr-first

(Optional) ITD node IPv4 address

IPv6

(Optional) IPv6 address

Command Mode

- /exec/configure/itd-dg-node

standby

[no] standby [ ip <ip-addr-first> | IPv6 <ip-addrv6-first> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

standby

Standby node

ip

(Optional) ip address for standby node

ip-addr-first

(Optional) ITD node IPv4 address

IPv6

(Optional) IPv6 address

Command Mode

- /exec/configure/itd-dg-node

start

start

Syntax Description

start

Start Trigger

Command Mode

- /exec/elamns/outsel5

start

start

Syntax Description

start

Start Trigger

Command Mode

- /exec/elamns/sel3

start

start

Syntax Description

start

Start Trigger

Command Mode

- /exec/elamns/sel4

start

start

Syntax Description

start

Start Trigger

Command Mode

- /exec/elamns/sel5

start

start

Syntax Description

start

Start Trigger

Command Mode

- /exec/elamns/sel6

start

start

Syntax Description

start

Start Trigger

Command Mode

- /exec/elamns/sel7

start

start

Syntax Description

start

Start Trigger

Command Mode

- /exec/elamns/outsel0

state

state <vstate> | no state

Syntax Description

no

Negate a command or set its defaults

state

Operational state of the VLAN

vstate

Command Mode

- /exec/configure/vlan

state enabled

[no] state enabled

Syntax Description

no

(Optional) Negate a command or set its defaults

state

Port-profile state

enabled

Enable/ disable the port-profile

Command Mode

- /exec/configure/port-profile

stateful-ha

[no] stateful-ha [ pss-partial-lsp ]

Syntax Description

stateful-ha

Configure RSVP stateful HA

pss-partial-lsp

(Optional) Enable PSS of partial lsps

Command Mode

- /exec/configure/ip-rsvp

stateful-ha

[no] stateful-ha [ test-recovery ]

Syntax Description

no

(Optional) Negate a command or set its defaults

stateful-ha

Enable stateful IS-IS HA

test-recovery

(Optional) Test stateful HA recovery

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

statistics

[no] statistics

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/macacl

statistics

[no] statistics

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/ipacl /exec/configure/vacl

statistics

[no] statistics

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/ipv6acl

statistics per-entry

[no] statistics per-entry

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/ipv6acl

statistics per-entry

[no] statistics per-entry

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/ipacl /exec/configure/vacl

statistics per-entry

[no] statistics per-entry

Syntax Description

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/macacl

stats-reporting-period

stats-reporting-period <time-in-sec> | no stats-reporting-period

Syntax Description

no

Negate a command or set its defaults

stats-reporting-period

Interval after which statistics are sent to the BMP server

time-in-sec

Delay value

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

status

status

Syntax Description

status

Status of Trigger

Command Mode

- /exec/elamns/sel5

status

status

Syntax Description

status

Status of Trigger

Command Mode

- /exec/elamns/sel3

status

status

Syntax Description

status

Status of Trigger

Command Mode

- /exec/elamns/sel4

status

status

Syntax Description

status

Status of Trigger

Command Mode

- /exec/elamns/sel6

status

status

Syntax Description

status

Status of Trigger

Command Mode

- /exec/elamns/sel7

status

status

Syntax Description

status

Status of Trigger

Command Mode

- /exec/elamns/outsel0

status

status

Syntax Description

status

Status of Trigger

Command Mode

- /exec/elamns/outsel5

sticky root-selection

sticky root-selection | no sticky root-selection

Syntax Description

no

Negate a command or set its defaults

sticky

sticky root selection for a topology

root-selection

sticky root selection for a topology

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

stopbits 1

[no] stopbits { 1 }

Syntax Description

no

(Optional) Negate a command or set its defaults

stopbits

Set async line stopbits

1

One stop bit

Command Mode

- /exec/configure/console

stopbits 1

[no] stopbits { 1 | 2 }

Syntax Description

no

(Optional) Negate a command or set its defaults

stopbits

Set async line stopbits

1

One stop bit

2

Two stop bits

Command Mode

- /exec/configure/com1

storm-control-cpu

storm-control-cpu { { arp rate } <pps> } | no storm-control-cpu arp

Syntax Description

no

Negate a command or set its defaults

storm-control-cpu

Configure Interface storm control cpu

arp

arp storm control

rate

Set allowed arp traffic rate on this interface

pps

value in packets per sec

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

storm-control

storm-control { { { broadcast blevel | multicast mlevel | unicast ulevel } <level> } | action { shutdown | trap } } | no storm-control { { { broadcast blevel | multicast mlevel | unicast ulevel } [ <level> ] } | action [ shutdown | trap ] }

Syntax Description

no

Negate a command or set its defaults

storm-control

Configure Interface storm control

broadcast

Broadcast address storm control

multicast

Multicast address storm control

unicast

Unicast address storm control

blevel

Set allowed broadcast traffic level on this interface

mlevel

Set allowed multicast traffic level on this interface

ulevel

Set allowed unicast traffic level on this interface

level

Enter the storm suppression level

action

Action on storm control

shutdown

Shutdown (Err-Disable) port

trap

Generate SNMP trap

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-l2-non-member /exec/configure/if-eth-port-channel-switch

stp-root

[no] stp-root <vlan-id> <number-of-entries> <version>

Syntax Description

no

(Optional) Negate a command or set its defaults

stp-root

Generate STP root, test cmd

vlan-id

Enter the vlan-id

number-of-entries

Enter the number of entries

version

Enter 1 for L2gip 0 for Edge TCN

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

streetaddress

{ streetaddress <line> | no streetaddress }

Syntax Description

no

Negate a command or set its defaults

streetaddress

Configure replacement part shipping address.

line

Provide street address (white spaces are fine)

Command Mode

- /exec/configure/callhome

stub

{ { [ eigrp ] stub [ { [ direct | connected | static | summary ] [ redistributed ] } + [ leak-map <leak-map> ] | { receive-only } ] } | { no [ eigrp ] stub [ { [ direct | connected | static | summary ] [ redistributed ] } + [ leak-map <leak-map> ] | { receive-only } ] } }

Syntax Description

no

Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

stub

Set IP-EIGRP as stubbed router

direct

(Optional) Do advertise connected routes

connected

(Optional) Do advertise connected routes

static

(Optional) Do advertise static routes

summary

(Optional) Do advertise summary routes

redistributed

(Optional) Do advertise redistributed routes

leak-map

(Optional) Allow dynamic prefixes based on the leak-map

leak-map

(Optional) leak-map name

receive-only

(Optional) Set IP-EIGRP as receive only neighbor

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

subscription

[no] subscription <sub-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

subscription

Create a Subscription

sub-id

Identifier

Command Mode

- /exec/configure/telemetry

summary-address

[no] summary-address { <ip-dest> <ip-mask> | <ip-prefix> } [ tag <tagval> | not-advertise ]

Syntax Description

no

(Optional) Negate a command or set its defaults

summary-address

Configure route summarization for redistribution

ip-dest

IP prefix format: i.i.i.i

ip-mask

IP network mask format: m.m.m.m

ip-prefix

IP prefix format: x.x.x.x/ml

tag

(Optional) 32-bit tag value

tagval

(Optional) 32-bit tag value

not-advertise

(Optional) Supress advertising the specified summary

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

summary-address

summary-address { <ip-addr> <ip-mask> | <ip-prefix> } <level> | no summary-address { <ip-addr> <ip-mask> | <ip-prefix> } [ <level> ]

Syntax Description

no

Negate a command or set its defaults

summary-address

Configure IP address summaries

ip-addr

IP summary address

ip-mask

IP summary mask

ip-prefix

IP summary prefix

level

Level to summarize into

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv4

summary-address

summary-address <ipv6-prefix> <level> | no summary-address <ipv6-prefix> [ <level> ]

Syntax Description

no

Negate a command or set its defaults

summary-address

Configure IP address summaries

level

Level to summarize into

Command Mode

- /exec/configure/router-isis/router-isis-af-ipv6

summary-address

[no] summary-address <ipv6-prefix> [ tag <tagval> | not-advertise ]

Syntax Description

no

(Optional) Negate a command or set its defaults

summary-address

Configure route summarization for redistribution

tag

(Optional) 32-bit tag value

tagval

(Optional) 32-bit tag value

not-advertise

(Optional) Supress advertising the specified summary

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

suppress-arp

[no] suppress-arp

Syntax Description

no

(Optional) Negate a command or set its defaults

suppress-arp

Enable ARP suppression

Command Mode

- /exec/configure/if-nve/vni

suppress-fib-pending

[no] suppress-fib-pending

Syntax Description

no

(Optional) Negate a command or set its defaults

suppress-fib-pending

Advertise only routes that are programmed in hardware to peers

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

suppress-fib-pending

[no] suppress-fib-pending

Syntax Description

no

(Optional) Negate a command or set its defaults

suppress-fib-pending

Advertise only routes that are programmed in hardware to peers

Command Mode

- /exec/configure/router-bgp

suppress-inactive

[no] suppress-inactive

Syntax Description

no

(Optional) Negate a command or set its defaults

suppress-inactive

Advertise only active routes to peers

Command Mode

- /exec/configure/router-bgp/router-bgp-af

suppress-inactive

[ no | default ] suppress-inactive

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

suppress-inactive

Advertise only active routes to peer

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

suppress-signaling-protocol ldp

[ no | default ] suppress-signaling-protocol ldp

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

suppress-signaling-protocol

Suppress VPLS BGP AD protocol

ldp

LDP signaling

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

suppress mac-route

[no] suppress mac-route

Syntax Description

no

(Optional) Negate a command or set its defaults

suppress

Suppress MAC only route advertisement

mac-route

MAC route

Command Mode

- /exec/configure/if-nve

switch-id

switch-id <asid> | no switch-id

Syntax Description

no

Negate a command or set its defaults

switch-id

Configure Switch ID

asid

Anycast Switch ID

Command Mode

- /exec/configure/anycast

switch-priority

{ switch-priority <i0> | no switch-priority }

Syntax Description

no

Negate a command or set its defaults

switch-priority

Priority of the switch(0-highest 7-lowest)

i0

Priority of the switch(0-highest 7-lowest)

Command Mode

- /exec/configure/callhome

switch-priority

switch-priority <priority> | no switch-priority

Syntax Description

no

Negate the command

switch-priority

Switch priority

priority

Priority

Command Mode

- /exec/configure/fex

switch-profile

switch-profile <s0>

Syntax Description

switch-profile

Enter switch-profile configuration mode

s0

Enter the name of the switch-profile

Command Mode

- /exec/configure

switch-profile

[no] switch-profile <s0> { profile-only { local | all } | local-config | all-config }

Syntax Description

no

Negate a command or set its defaults

switch-profile

Enter switch-profile configuration mode

s0

Enter the name of the switch-profile

profile-only

Deletion of profile only and no other configuration

local

Deletion of profile only and no other configurations in local switch

all

Deletion of profile only and no other configurations from all the peers

local-config

Deletion of profile and local configuration

all-config

Deletion of profile, local and peer configurations

Command Mode

- /exec/configure

switch-scope controller

{ switch-scope controller <controller-id> | no switch-scope controller }

Syntax Description

no

Negate a command or set its defaults

switch-scope

switch-scope

controller

Controller command

controller-id

Controller id

Command Mode

- /exec

switchback

switchback

Syntax Description

switchback

switchback to default vdc

Command Mode

- /exec

switching-mode fabric-speed 40g

[no] switching-mode fabric-speed 40g

Syntax Description

no

(Optional) Negate a command or set its defaults

switching-mode

Configure the operating switching-mode of asics

fabric-speed

fabric speed settings

40g

fabric speed at 40g instead of 42g

Command Mode

- /exec/configure

switching-mode store-forward

[no] switching-mode store-forward

Syntax Description

no

(Optional) Negate a command or set its defaults

switching-mode

Configure the operating switching-mode of asics

store-forward

Operate in store and forward mode

Command Mode

- /exec/configure

switchport

switchport

Syntax Description

switchport

Configure switchport parameters

Command Mode

- /exec/configure/if-eth-non-member /exec/configure/if-ethernet-all /exec/configure/if-port-channel /exec/configure/if-ethernet-p2p

switchport

[no] switchport

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-eth-non-member /exec/configure/if-ethernet /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-port-channel /exec/configure/if-ethernet-p2p

switchport access vlan

switchport access vlan <vlan-id-access> | no switchport access vlan

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

access

Set access mode characteristics of the interface

vlan

Set VLAN when interface is in access mode

vlan-id-access

VLAN ID of the VLAN when this port is in access mode

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch

switchport access vlan

switchport access vlan <vlan-id-access> | no switchport access vlan

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

access

Set access mode characteristics of the interface

vlan

Set VLAN when interface is in access mode

vlan-id-access

VLAN ID of the VLAN when this port is in access mode

Command Mode

- /exec/configure/if-ethernet-all

switchport access vlan

switchport access vlan <vlan-id-access> | no switchport access vlan

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

access

Set access mode characteristics of the interface

vlan

Set VLAN when interface is in access mode

vlan-id-access

VLAN ID of the VLAN when this port is in access mode

Command Mode

- /exec/configure/if-eth-port-channel-switch

switchport autostate exclude

switchport autostate exclude [ vlan { <exclude-vlans> | add <add-vlans> | except <except-vlans> | remove <remove-vlans> | all | none } ] | no switchport autostate exclude [ dummy ] [ vlan { <exclude-vlans> | add <add-vlans> } ]

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

autostate

Include or exclude this port from vlan link up calculation

exclude

Exclude this port from vlan link up calculation

vlan

(Optional) VLAN Id

exclude-vlans

(Optional) VLAN IDs of the VLANs to auto-state exclude on this interface

add

(Optional) add VLANs to except list

add-vlans

(Optional) VLAN IDs of the VLANs to auto-state exclude on this interface

except

(Optional) List of VLANs to excepted from auto-state exclude

except-vlans

(Optional) VLAN IDs of the VLANs to auto-state exclude on this interface

remove

(Optional) remove VLANs from except list

remove-vlans

(Optional) VLAN IDs of the VLANs to auto-state exclude on this interface

all

(Optional) Exclude all VLANs

none

(Optional) Exclude no VLANs

dummy

(Optional) Hidden Keyword

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-gig-ether /exec/configure/if-port-channel-range /exec/configure/if-eth-port-channel-switch

switchport block unicast

switchport block { unicast | multicast } | no switchport block { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

block

Block specified outbound traffic for all VLANs

unicast

Block unknown unicast traffic

multicast

Block flood multicast traffic

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport dot1q ethertype

switchport dot1q ethertype { 0x8100 | 0x88A8 | 0x9100 | <any> } | no switchport dot1q ethertype [ <any> ]

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

dot1q

Configure dot1q EtherType value

ethertype

Configure dot1q EtherType value

0x8100

Default EtherType for 802.1q frames

0x88A8

EtherType for 802.1ad double tagged frames

0x9100

EtherType for QinQ frames

any

Any EtherType

Command Mode

- /exec/configure/if-eth-port-channel-switch

switchport dot1q ethertype

switchport dot1q ethertype { 0x8100 | 0x88A8 | 0x9100 | <any> } | no switchport dot1q ethertype [ <any> ]

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

dot1q

Configure dot1q EtherType value

ethertype

Configure dot1q EtherType value

0x8100

Default EtherType for 802.1q frames

0x88A8

EtherType for 802.1ad double tagged frames

0x9100

EtherType for QinQ frames

any

Any EtherType

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all

switchport host

[no] switchport host

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

host

Set port host

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-switch-m /exec/configure/if-ethernet-all

switchport isolated

[no] switchport isolated

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

isolated

Disable loop-free detection.

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport mac-learn disable

switchport mac-learn disable | no switchport mac-learn disable

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

mac-learn

Disable/enable mac learning on interface

disable

Disable mac learning on all VLANs on interface

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

switchport mode

{ switchport mode { <port_mode> } | no switchport mode }

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

mode

Enter the port mode

port_mode

port mode

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport mode

{ switchport mode { <port_mode> } | no switchport mode }

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

mode

Enter the port mode

port_mode

port mode

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport mode fabricpath

[no] switchport mode fabricpath

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

mode

Enter the port mode

fabricpath

port mode fabricpath

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport mode monitor buffer-limit

switchport mode monitor buffer-limit { <value> [ packets | bytes | kbytes | mbytes ] } | no switchport mode monitor buffer-limit

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

mode

Enter the port mode

monitor

Configures an interface as span-destination

buffer-limit

Set buffer limit for span destination

value

Limit in terms of packets

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport mode private-vlan

{ switchport mode private-vlan <port_mode> } | { no switchport mode private-vlan [ <port_mode> ] }

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

mode

Enter the port mode

private-vlan

Set the private VLAN configuration

port_mode

private vlan mode

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-remote-ethernet-switch

switchport mode private-vlan trunk

{ switchport mode private-vlan trunk <trunk_mode> } | { no switchport mode private-vlan trunk [ <trunk_mode> ] }

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

mode

Enter the port mode

private-vlan

Set the private VLAN configuration

trunk

private-vlan trunk

trunk_mode

private vlan trunk mode

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch /exec/configure/if-remote-ethernet-switch

switchport monitor

switchport monitor [ ingress [ learning ] ] | no switchport monitor

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

monitor

Configures an interface as span-destination

ingress

(Optional) Enables the forwarding on incoming packets

learning

(Optional) Enables mac-learning

Command Mode

- /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport port-security

[no] switchport port-security

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

port-security

Port security related command

Command Mode

- /exec/configure/if-switching

switchport port-security aging time

[no] switchport port-security aging time <value>

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

port-security

Port security related command

aging

Port-security aging commands

time

Port-security aging time

value

Aging time in minutes. Enter a value between 1 and 1440

Command Mode

- /exec/configure/if-switching

switchport port-security aging type absolute

[no] switchport port-security aging type { absolute | inactivity }

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

port-security

Port security related command

aging

Port-security aging commands

type

Type of timers

absolute

Absolute Timer

inactivity

Inactivity Timer

Command Mode

- /exec/configure/if-switching

switchport port-security mac-address

[no] switchport port-security mac-address <mac-address> [ vlan <vlanid> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

port-security

Port security related command

mac-address

MAC address

mac-address

48 bit mac address format HHHH.HHHH.HHHH

vlan

(Optional) Vlan on which the mac address should be secured

vlanid

(Optional) vlan id. Enter a value between 1 and 4094

Command Mode

- /exec/configure/if-switching

switchport port-security mac-address sticky

[no] switchport port-security mac-address sticky

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

port-security

Port security related command

mac-address

MAC address

sticky

Sticky MAC address

Command Mode

- /exec/configure/if-switching

switchport port-security maximum

[no] switchport port-security maximum <value> [ vlan <vlanid> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

port-security

Port security related command

maximum

Max secure addresses

value

Maximum addresses 1 to 1025

vlan

(Optional) Vlan on which the mac address should be secured

vlanid

(Optional) vlan id. Enter a value between 1 and 4094

Command Mode

- /exec/configure/if-switching

switchport port-security violation

[no] switchport port-security violation { protect | restrict | shutdown }

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

port-security

Port security related command

violation

Security violation mode

protect

security violation protect mode

restrict

security violation restrict mode

shutdown

security violation shutdown mode

Command Mode

- /exec/configure/if-switching

switchport private-vlan association trunk

{ switchport private-vlan association trunk <primary-vlan> <secondary-vlan> } | { no switchport private-vlan association trunk [ <primary-vlan> [ <secondary-vlan> ] ] }

Syntax Description

switchport

Configure switchport parameters

private-vlan

Set the private VLAN configuration

association

private vlan trunk association

trunk

private-vlan trunk secondary

no

Negate a command or set its defaults

primary-vlan

Primary VLAN ID

secondary-vlan

Secondary VLAN ID

Command Mode

- /exec/configure/if-switching /exec/configure/if-eth-port-channel-switch

switchport private-vlan host-association

{ switchport private-vlan host-association <primary-vlan> <secondary-vlan> } | { no switchport private-vlan host-association }

Syntax Description

switchport

Configure switchport parameters

private-vlan

Set the private VLAN configuration

host-association

Set the private VLAN host association

no

Negate a command or set its defaults

primary-vlan

Primary VLAN ID

secondary-vlan

Secondary VLAN ID

Command Mode

- /exec/configure/if-switching /exec/configure/if-eth-port-channel-switch

switchport private-vlan mapping

{ switchport private-vlan mapping <primary-vlan> [ { add | remove } ] <secondary_vlans> } | { no switchport private-vlan mapping [ <primary-vlan> <secondary_vlans> ] }

Syntax Description

switchport

Configure switchport parameters

private-vlan

Set the private VLAN configuration

mapping

Set the private VLAN access/trunk promiscuous mapping

add

(Optional) Add a VLAN to private VLAN list

remove

(Optional) Remove a VLAN from private VLAN list

no

Negate a command or set its defaults

primary-vlan

Primary private VLAN

secondary_vlans

Secondary VLAN IDs

Command Mode

- /exec/configure/if-switching /exec/configure/if-eth-port-channel-switch

switchport private-vlan mapping trunk

{ switchport private-vlan mapping trunk <primary-vlan> [ { add | remove } ] <secondary_vlans> } | { no switchport private-vlan mapping trunk [ <primary-vlan> [ <secondary_vlans> ] ] }

Syntax Description

switchport

Configure switchport parameters

private-vlan

Set the private VLAN configuration

mapping

Set the private VLAN access/trunk promiscuous mapping

add

(Optional) Add a VLAN to private VLAN list

remove

(Optional) Remove a VLAN from private VLAN list

no

Negate a command or set its defaults

trunk

private-vlan trunk promiscuous

primary-vlan

Primary private VLAN

secondary_vlans

Secondary VLAN IDs

Command Mode

- /exec/configure/if-switching /exec/configure/if-eth-port-channel-switch

switchport private-vlan trunk allowed vlan

switchport private-vlan trunk allowed vlan { <allowed-vlans> | add <add-vlans> | except <except-vlans> | remove <remove-vlans> | all | none } | no switchport private-vlan trunk allowed vlan <no-allowed-vlans>

Syntax Description

switchport

Configure switchport parameters

private-vlan

Set the private VLAN configuration

trunk

Set the private vlan trunking configuration

allowed

Set allowed VLANs when interface is in private-vlan trunking mode

vlan

VLAN status

allowed-vlans

VLAN IDs of the allowed VLANs when interface is in private-vlan trunking mode

add

add VLANs to the current list

add-vlans

VLAN IDs of the allowed VLANs when interface is in private-vlan trunking mode

except

all VLANs except the following

except-vlans

VLAN IDs of disallowed VLANS when this port is in trunking mode

remove

remove VLANs from the current list

remove-vlans

VLAN IDs of disallowed VLANS when this port is in trunking mode

all

all VLANs

none

no VLANs

no

Negate a command or set its defaults

no-allowed-vlans

VLAN IDs of disallowed VLANs when this port is in trunking mode

Command Mode

- /exec/configure/if-switching /exec/configure/if-eth-port-channel-switch

switchport private-vlan trunk native vlan

{ switchport private-vlan trunk native vlan <native-vlan> } | { no switchport private-vlan trunk native vlan }

Syntax Description

switchport

Configure switchport parameters

private-vlan

Set the private VLAN configuration

no

Negate a command or set its defaults

trunk

Set the private vlan trunking configuration

native

Set the private vlan trunking native configuration

vlan

VLAN status

native-vlan

native vlan id

Command Mode

- /exec/configure/if-switching /exec/configure/if-eth-port-channel-switch

switchport trunk allowed vlan

switchport trunk allowed vlan { <allow-vlans> | add <add-vlans> | except <except-vlans> | remove <remove-vlans> | all | none } | no switchport trunk allowed vlan

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

trunk

Configure trunking parameters on an interface

allowed

Set allowed VLAN characteristics when interface is in trunking mode

vlan

Set allowed VLANs when interface is in trunking mode

allow-vlans

VLAN IDs of the allowed VLANs when this port in trunking mode

add

add VLANs to the current list

add-vlans

VLAN IDs of the allowed VLANs when this port in trunking mode

all

all VLANs

except

all VLANs except the following

except-vlans

VLAN IDs of the allowed VLANs when this port in trunking mode

none

no VLANs

remove

remove VLANs from the current list

remove-vlans

VLAN IDs of the allowed VLANs when this port in trunking mode

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport trunk native vlan

switchport trunk native vlan <vlan-id-native> | no switchport trunk native vlan

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

trunk

Configure trunking parameters on an interface

native

Set trunking native characteristics when interface is in trunking mode

vlan

Set native VLAN when interface is in trunking mode

vlan-id-native

VLAN ID of the native VLAN when this port is in trunking mode

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport trunk pruning vlan except add remove none all

{ no switchport trunk pruning vlan [ <vlan-ids> ] | switchport trunk pruning vlan <vlan-ids> | switchport trunk pruning vlan except <vlan-ids> | switchport trunk pruning vlan add <vlan-ids> | switchport trunk pruning vlan remove <vlan-ids> | switchport trunk pruning vlan none | switchport trunk pruning vlan all }

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

trunk

Configure trunking parameters on an interface

pruning

Set pruning VLAN characteristics when interface is in trunking mode

vlan

Enter VLANs

add

add VLANs to the current list

remove

remove VLANs from the current list

except

all VLANs except the following

none

no VLANs

all

all VLANs

vlan-ids

(Optional) Enter VLANs

Command Mode

- /exec/configure/if-switching

switchport vlan mapping

[no] switchport vlan mapping <vlan-id-orig> [ inner <vlan-id-inner> ] <vlan-id-translated>

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

vlan

Set VLAN translation mapping

mapping

VLAN translation mapping

vlan-id-orig

VLAN ID 1-3967

inner

(Optional) inner vlanid

vlan-id-inner

(Optional) Inner VLAN ID

vlan-id-translated

Translated VLAN ID

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport vlan mapping all

[no] switchport vlan mapping all

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

vlan

Set VLAN translation mapping

mapping

VLAN translation mapping

all

all VLANs

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport vlan mapping all dot1q-tunnel

[no] switchport vlan mapping all dot1q-tunnel

Syntax Description

no

Negate a command or set its defaults

switchport

Configure switchport parameters

vlan

Set VLAN translation mapping

mapping

VLAN translation mapping

all

all VLANs

dot1q-tunnel

selective dot1q-tunnel

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport vlan mapping all dot1q-tunnel

[no] switchport vlan mapping all dot1q-tunnel <vlan-id-translated>

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

vlan

Set VLAN translation mapping

mapping

VLAN translation mapping

all

all VLANs

dot1q-tunnel

selective dot1q-tunnel

vlan-id-translated

Translated VLAN ID

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport vlan mapping dot1q-tunnel

[no] switchport vlan mapping <vlan-id-orig2> dot1q-tunnel <vlan-id-translated>

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

vlan

Set VLAN translation mapping

mapping

VLAN translation mapping

vlan-id-orig2

VLAN ID 1-4094 or Vlan range(s): 1-5, 10 or 2-5,7-19 for Selective dot1q-tunnel

dot1q-tunnel

selective dot1q-tunnel

vlan-id-translated

Translated VLAN ID

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport vlan mapping dot1q-tunnel allowed-vlan

[no] switchport vlan mapping dot1q-tunnel allowed-vlan <vlan-id-list>

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

vlan

Set VLAN translation mapping

mapping

VLAN translation mapping

dot1q-tunnel

selective dot1q-tunnel

allowed-vlan

Set allowed VLAN characteristics when interface is in trunking mode

vlan-id-list

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchport vlan mapping enable

[no] switchport vlan mapping enable

Syntax Description

no

(Optional) Negate a command or set its defaults

switchport

Configure switchport parameters

vlan

Set VLAN translation mapping

mapping

VLAN translation mapping

enable

enable/disable VLAN translation

Command Mode

- /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-p2p-switch /exec/configure/if-remote-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

switchto vdc

switchto vdc <e-vdc2> [ force ] [ bypass ] [ __readonly__ <vdc_id> <invalid_vdc_id> <noauth_vdc_id> <no_first> ]

Syntax Description

switchto

Goto specific Virtual Device Context <vdc-name> | <vdc-id>

vdc

Manage Virtual Device Context

e-vdc2

Enter Virtual Device Context <vdc-id>

__readonly__

(Optional) Read Only

force

(Optional) force

vdc_id

(Optional) Enter Virtual Device Context <vdc-id>

invalid_vdc_id

(Optional) Enter Virtual Device Context <vdc-id>

noauth_vdc_id

(Optional) Enter Virtual Device Context <vdc-id>

no_first

(Optional) Enter Virtual Device Context <vdc-id>

bypass

(Optional) Enter Virtual Device Context <vdc-id>

Command Mode

- /exec/

sync-peers destination

sync-peers destination <dst-ip> [ source <src-ip> | vrf <vrf-name> ] + | no sync-peers destination [ <dst-ip> [ source <src-ip> ] ]

Syntax Description

no

Negate a command or set its defaults

sync-peers

Specify peers to whom configuration needs to be synced

destination

Specify destination ip address of peer switch

dst-ip

IPv4 address (A.B.C.D) of destination

source

(Optional) Source interface for sending out configs

src-ip

(Optional) IPv4 address (A.B.C.D) of source

vrf

(Optional) vrf to be used default/management

vrf-name

(Optional) vrf to be used

Command Mode

- /exec/configure

sync-snmp-password

[no] sync-snmp-password <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

sync-snmp-password

sync snmp password

s0

password

Command Mode

- /exec/configure

sync-snmp-password

sync-snmp-password <s0>

Syntax Description

sync-snmp-password

sync snmp password

s0

password

Command Mode

- /exec

sync-snmp-password

sync-snmp-password <s0> <s1> <s2>

Syntax Description

sync-snmp-password

sync snmp password

s0

password

s1

user

s2

snmp client host

Command Mode

- /exec

syslog

syslog { msg <s0> | priority { <i0> msg1 <s1> | alerts msg2 <s2> | critical msg3 <s3> | debugging msg4 <s4> | emergencies msg5 <s5> | errors msg6 <s6> | informational msg7 <s7> | notifications msg8 <s8> | warnings msg9 <s9> } }

Syntax Description

syslog

Execute a logging command

msg

Log EEM action message

s0

Enter the msg (max 300 chars)

priority

Priority of the log message

i0

Enter priority of the log message

msg1

Log EEM action message

s1

Enter the msg (max 300 chars)

alerts

Alert log message

msg2

Log EEM action message

s2

Enter the msg (max 300 chars)

critical

Critical log message

msg3

Log EEM action message

s3

Enter the msg (max 300 chars)

debugging

Debugging log message

msg4

Log EEM action message

s4

Enter the msg (max 300 chars)

emergencies

Emergency log message

msg5

Log EEM action message

s5

Enter the msg (max 300 chars)

errors

Error log message

msg6

Log EEM action message

s6

Enter the msg (max 300 chars)

informational

Informational log message

msg7

Log EEM action message

s7

Enter the msg (max 300 chars)

notifications

Notifications log message

msg8

Log EEM action message

s8

Enter the msg (max 300 chars)

warnings

Warning log message

msg9

Log EEM action message

s9

Enter the msg (max 300 chars)

Command Mode

- /exec

system-mac

[no] system-mac <mac-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

system-mac

Mac Address

mac-addr

specify system mac address

Command Mode

- /exec/configure/if-eth-port-channel/ethernet-segment

system-mac

system-mac <sysmac> | no system-mac

Syntax Description

no

Negate a command or set its defaults

system-mac

Configure system mac address

sysmac

specify system mac address

Command Mode

- /exec/configure/vpc-domain

system-priority

system-priority <syspri> | no system-priority

Syntax Description

no

Negate a command or set its defaults

system-priority

Configure system priority

syspri

specify system priority

Command Mode

- /exec/configure/vpc-domain

system

[no] system { { routing { hierarchical def-max-mode l3 64b-alpm | non-hierarchical [ max-mode l3-nh [ 64b-alpm-nh ] ] | max-mode host | max-mode-tor { l2 | l3 | l2-l3 } | template-overlay-host-scale | template-lpm-heavy | template-lpm-scale-v6-64 | template-dual-stack-host-scale | template-dynamic-trie-scale | template-multicast-heavy | template-vxlan-scale | template-mpls-heavy | template-internet-peering | template-multicast-nbm } } | { non-hierarchical-routing [ max-l3-mode ] } }

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

routing

Layer-3 routing

hierarchical

Host routing on LC and LPM routing in FM

non-hierarchical

Disable mode of host routing on LC and LPM routing in Fabric modules

non-hierarchical-routing

Disable mode of host routing on LC and LPM routing in Fabric modules

def-max-mode

Maximum scale to be enabled

max-mode

(Optional) Maximum scale to be enabled

max-mode-tor

Maximum scale to be enabled

l2

Max Layer-2 records and fewer Layer-3 host routes

l3

Layer-3 longest-prefix-match (LPM) routes

l2-l3

Balance of both Layer-2 records and Layer-3 host routes

l3-nh

(Optional) Layer-3 longest-prefix-match (LPM) routes

64b-alpm

IPv6 routes with masks /64 or shorter

64b-alpm-nh

(Optional) IPv6 routes with masks /64 or shorter

max-l3-mode

(Optional) Enable ALPM mode (Mode-4 in T2)

host

host routes

template-internet-peering

Internet Peering

template-overlay-host-scale

Overlay Host Scale

template-lpm-heavy

LPM Heavy

template-lpm-scale-v6-64

LPM Scale V6 64

template-dual-stack-host-scale

Dual Stack Host Scale

template-dynamic-trie-scale

Dynamic TRIE Scale

template-multicast-heavy

Multicast Heavy Scale

template-multicast-nbm

Multicast NBM Scale

template-mpls-heavy

MPLS Heavy Scale

template-vxlan-scale

Vxlan Scale

Command Mode

- /exec/configure

system acl

[no] system acl

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System management commands

acl

ACL parameters

Command Mode

- /exec/configure

system auto-collect tech-support

system [ no ] auto-collect tech-support [ timeout <time> ]

Syntax Description

system

System management commands

no

(Optional) Negate a command or set its defaults

auto-collect

Auto collection of information

tech-support

Collect tech-support in case of service causing supervisor reset

timeout

(Optional) Collect tech-support timeout

time

(Optional) Timeout in seconds

Command Mode

- /exec

system cores

{ system cores { { <uri0> } | { <uri1> vrf <vrf-known-name> } } | no system cores [ { { <uri0> } | { <uri1> vrf <vrf-known-name> } } ] }

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

cores

Copy cores to destination

uri0

Select destination filesystem

uri1

Select destination filesystem

vrf

Enter the vrf name

vrf-known-name

VRF name

Command Mode

- /exec/configure

system cores retain

[no] system cores retain

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

cores

Copy cores to destination

retain

keep the cores

Command Mode

- /exec/configure

system default interface-vlan autostate

[no] system default interface-vlan autostate

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

interface-vlan

Configure interface-vlan

default

Configure system default values

autostate

Enable or disable autostate for entire system

Command Mode

- /exec/configure

system default interface

{ system default interface { congestion { timeout <i0> mode { core | edge } | mode { core | edge } } | pause { timeout <i1> mode1 { core | edge } | mode1 { core | edge } } } | no system default interface { congestion { timeout <i0> mode { core | edge } | mode { core | edge } } | pause { timeout <i1> mode1 { core | edge } | mode1 { core | edge } } } }

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

default

Configure system default values

interface

Configure system default interface values

congestion

Configure system timeout values for congestion drop

pause

Configure system timeout values for pause frame

timeout

Configure system timeout values

i0

Configure number of milliseconds

i1

Configure number of milliseconds

mode

Configure mode

mode1

Configure mode

core

Enter the port type

edge

Enter the port type

Command Mode

- /exec/configure

system default switchport

{ [ no ] system default switchport }

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

default

Configure system default values

switchport

Configure switchport

Command Mode

- /exec/configure

system default switchport fabricpath

{ system default switchport fabricpath | no system default switchport fabricpath }

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

default

Configure system default values

switchport

Configure switchport

fabricpath

Configure default port mode as fabricpath

Command Mode

- /exec/configure

system default switchport shutdown

{ [ no ] system default switchport shutdown }

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

default

Configure system default values

switchport

Configure switchport

shutdown

Configure admin state

Command Mode

- /exec/configure

system dme enable

[no] system dme enable

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

dme

Manage 4G DME enable/disable

enable

enable

Command Mode

- /exec/configure

system dot1q-tunnel transit

[no] system dot1q-tunnel transit

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

dot1q-tunnel

Dot1Q tunnel

transit

Transit box for multi-tag Ethernet Frames

Command Mode

- /exec/configure

system fabric-mode full-rate

[no] system fabric-mode full-rate

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

fabric-mode

Configure the operating mode of the fabrics

full-rate

Operates fabrics in Full Rate Mode

Command Mode

- /exec/configure

system fabric core-vlans

{ system fabric core-vlans <id> | no system fabric core-vlans }

Syntax Description

no

Negate a command or set its defaults

system

System management commands

fabric

Manage fabric dynamic vlan ranges

core-vlans

Configure the dynamic core vlan range

id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

system fabric dynamic-vlans

{ system fabric dynamic-vlans <id> | no system fabric dynamic-vlans }

Syntax Description

no

Negate a command or set its defaults

system

System management commands

fabric

Manage fabric dynamic vlan ranges

dynamic-vlans

Configure the dynamic server and core vlan range

id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

system fast-reload stabilization-timer

system fast-reload stabilization-timer <time>

Syntax Description

system

System management commands

fast-reload

fast-reload software

stabilization-timer

Network stabilization time in seconds before fast-reload can be executed after the previous reload

time

time in secs

Command Mode

- /exec/configure

system hap-reset

system hap-reset

Syntax Description

system

System management commands

hap-reset

enables resetting of local or remote sup on ha failures

Command Mode

- /exec

system hap-reset

system no hap-reset

Syntax Description

system

System management commands

no

Negate a command or set its defaults

hap-reset

enables resetting of local or remote sup on ha failures

Command Mode

- /exec

system health check bootflash

system health check bootflash [ fix-errors ]

Syntax Description

system

System management commands

health

system health exec commands

check

run consistency check on compact flash

bootflash

check internal bootflash

fix-errors

(Optional) fix bootflash errors

Command Mode

- /exec

system heartbeat

system heartbeat

Syntax Description

system

System management commands

heartbeat

enables heartbeat

Command Mode

- /exec

system heartbeat

system no heartbeat

Syntax Description

system

System management commands

no

Negate a command or set its defaults

heartbeat

enables heartbeat

Command Mode

- /exec

system high-multicast-priority

[no] system high-multicast-priority

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

high-multicast-priority

high priority to multicast

Command Mode

- /exec/configure

system inband queuing

system inband queuing { clear-pm-counters | clear-klm-counters | clear-all-counters | enable-timestamp | disable-timestamp }

Syntax Description

system

System-related show commands

inband

System Inband configuration

queuing

System Inband Queueing Algorithm

clear-pm-counters

clear user space inband queue counters

clear-klm-counters

clear KLM VDC inband queue counters

clear-all-counters

clear all inband queue counters

enable-timestamp

enable timestamping in klm vdc

disable-timestamp

disable timestamping in klm vdc

Command Mode

- /exec

system inband queuing

[no] system inband queuing [ { [ round-robin ] [ bpdu weight <weight-val> ] [ q0 weight <weight-val> ] [ q1 weight <weight-val> ] [ q0 no-drop ] [ q1 no-drop ] [ pick_packets ] [ bpdu map <q-index> ] [ arp map <q-index> ] [ q0 map <q-index> ] [ q1 map <q-index> ] } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System-related show commands

inband

System Inband configuration

queuing

System Inband Queueing Algorithm

round-robin

(Optional) Simple Round-Robin

bpdu

(Optional) bpdu queue

arp

(Optional) arp queue

q0

(Optional) q0 queue (cos 4,5,6,7)

q1

(Optional) q1 queue (cos 0,1,2,3)

weight

(Optional) weight associated with the queue

no-drop

(Optional) set no drop option on queue

weight-val

(Optional) weights

pick_packets

(Optional) enable packet rx

map

(Optional) map to queue

q-index

(Optional) queue index

Command Mode

- /exec/configure

system interface shutdown

[no] system interface shutdown [ exclude fex-fabric ]

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

interface

Configure system interface config

shutdown

Configure interface shutdown

exclude

(Optional) exclude

fex-fabric

(Optional) fex-fabric

Command Mode

- /exec/configure

system jumbomtu

{ system jumbomtu <mtu> | no system jumbomtu [ <mtu> ] }

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

jumbomtu

Configure system jumbomtu

mtu

Enter jumbomtu

Command Mode

- /exec/configure

system kernel-trace

system kernel-trace [ enable | disable ]

Syntax Description

system

system management commands

kernel-trace

kernel tracing

enable

(Optional) enables kernel tracing

disable

(Optional) disables kernel tracing

Command Mode

- /exec

system kgdb

system no kgdb

Syntax Description

system

System management commands

no

Negate a command or set its defaults

kgdb

enables kgdb

Command Mode

- /exec

system kgdb

system kgdb

Syntax Description

system

System management commands

kgdb

enables kgdb

Command Mode

- /exec

system login block-for

[no] system login block-for

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

login

Enable secure login checking

block-for

Set quiet-mode active time period

Command Mode

- /exec/configure

system login block-for attempts within

system login block-for <i1> attempts <i2> within <i3>

Syntax Description

system

System configuration commands

login

Enable secure login checking

block-for

Set quiet-mode active time period

i1

Time period in seconds

attempts

Set max number of fail attempts

i2

Fail attempts max value

within

Watch period for fail attempts

i3

Time period in seconds

Command Mode

- /exec/configure

system login quiet-mode

[no] system login quiet-mode

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

login

Enable secure login checking

quiet-mode

Set quiet-mode options

Command Mode

- /exec/configure

system login quiet-mode access-class

system login quiet-mode access-class <access-list>

Syntax Description

system

System configuration commands

login

Enable secure login checking

quiet-mode

Set quiet-mode options

access-class

Set access class

access-list

Access-list name

Command Mode

- /exec/configure

system memory-thresholds minor severe critical

[no] system memory-thresholds minor <minor> severe <severe> critical <crit>

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

memory-thresholds

Set memory thresholds on the card

minor

enter minor threshold

minor

please enter minor memory threshold as % memory

severe

enter severe treshold

severe

please enter severe memory threshold as % memory

critical

enter critical treshold

crit

please enter critical memory threshold as % memory

Command Mode

- /exec/configure

system minlife

system minlife <i0>

Syntax Description

system

System management commands

minlife

Set system minlife (in seconds)

i0

Set minlife

Command Mode

- /exec

system mode maintenance

[no] system mode maintenance [ dont-generate-profile ] [ non-interactive ] | system mode maintenance [ dont-generate-profile | shutdown ] [ non-interactive ]

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

mode

system mode commands

maintenance

system maintenance mode

dont-generate-profile

(Optional) do not generate the maintenance/normal-mode profile

shutdown

(Optional) issue shutdown instead of isolate (default)

non-interactive

(Optional) do operation non interactively in background

Command Mode

- /exec/configure

system mode maintenance always-use-custom-profile

[no] system mode maintenance always-use-custom-profile

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

mode

system mode commands

maintenance

system maintenance mode

always-use-custom-profile

always use custom profile when entering maintenance mode

Command Mode

- /exec/configure

system mode maintenance on-reload reset-reason

[no] system mode maintenance on-reload reset-reason <reason>

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

mode

system mode commands

maintenance

system maintenance mode

on-reload

on reload maintenance mode configuration

reset-reason

reset reason

reason

Command Mode

- /exec/configure

system mode maintenance snapshot-delay

[no] system mode maintenance snapshot-delay <delay-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

mode

system mode commands

maintenance

system maintenance mode

snapshot-delay

delay after which after_maintenance snapshot will be taken

delay-value

delay value in seconds

Command Mode

- /exec/configure

system mode maintenance timeout

[no] system mode maintenance timeout <timer-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

mode

system mode commands

maintenance

system maintenance mode

timeout

restart maintenance mode timer with a new value

timer-value

timer value in minutes

Command Mode

- /exec/configure

system module failure-action shutdown

[no] system module failure-action shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

system

system Internal Information

module

module commands

failure-action

Configure module action on failure

shutdown

action on failure - shutdown

Command Mode

- /exec/configure

system mrouting performance-mode

[no] system mrouting performance-mode

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

mrouting

Layer-3 mrouting

performance-mode

Multicast Performance Mode

Command Mode

- /exec/configure

system nve allow-vxlan-native-vlan

[no] system nve allow-vxlan-native-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System management commands

nve

VXLAN interface

allow-vxlan-native-vlan

Allow a vxlan vlan to be configured as a native vlan

Command Mode

- /exec/configure

system nve drop-glean

system nve drop-glean | no system nve drop-glean

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

drop-glean

Disable glean processing for VXLAN routes

Command Mode

- /exec/configure

system nve ecmp-reuse

system nve ecmp-reuse | no system nve ecmp-reuse

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

ecmp-reuse

Enable ECMP reuse to scale

Command Mode

- /exec/configure

system nve infra-vlans

system nve infra-vlans <vlan-range> | no system nve infra-vlans <vlan-range>

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

infra-vlans

Configure Vxlan SVI Uplinks(requires system reload)

vlan-range

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19 (The range of vlans configured must not exceed 512)

Command Mode

- /exec/configure

system nve infra-vlans force

system nve infra-vlans <vlan-range> force

Syntax Description

system

System Management Commands

nve

VXLAN interface

infra-vlans

Configure Vxlan SVI Uplinks(requires system reload)

vlan-range

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19 (The range of vlans configured must not exceed 512)

force

Force-set infra-vlans

Command Mode

- /exec/configure

system nve ingress-replication round-robin

[no] system nve ingress-replication round-robin

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

nve

VXLAN interface

ingress-replication

VXLAN Ingress replication

round-robin

Round-Robin hashing of underlay-paths for VXLAN ingress-replication peers

Command Mode

- /exec/configure

system nve ipmc global index-size

system nve ipmc global index-size { <size> | default } | no system nve ipmc global index-size [ <size> ]

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

ipmc

Configure ipmc index size

global

Configure global ipmc size

index-size

Configure index size

size

ipmc allowed size

default

Default size is 3000

Command Mode

- /exec/configure

system nve mac-learn-disable

system nve mac-learn-disable | no system nve mac-learn-disable

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

mac-learn-disable

Disable mac learning on VXLAN tunnels

Command Mode

- /exec/configure

system nve mac-nat-enable

system nve mac-nat-enable | no system nve mac-nat-enable

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

mac-nat-enable

Enable mac NATing for VXLAN routes

Command Mode

- /exec/configure

system nve peer-vni-counter

system nve peer-vni-counter | no system nve peer-vni-counter

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

peer-vni-counter

Enable per-peer-per-vni counters

Command Mode

- /exec/configure

system nve policy-install-all

system nve policy-install-all | no system nve policy-install-all

Syntax Description

no

Negate the command or set its defaults

system

System Management Commands

nve

VXLAN interface

policy-install-all

Install policies on all slices of forwarding ASIC

Command Mode

- /exec/configure

system offline

system offline

Syntax Description

system

System management commands

offline

Go offline

Command Mode

- /exec

system private-vlan fex trunk

[no] system private-vlan fex trunk

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System configuration commands

private-vlan

Configure Private VLANs

fex

Configure PVLANs on FEX Host Interface

trunk

Configure PVLANs on FEX Trunk Ports

Command Mode

- /exec/configure

system pss shrink

system pss shrink

Syntax Description

system

System management commands

pss

PSS commands

shrink

shrink pss files

Command Mode

- /exec

system qos

system qos

Syntax Description

system

System management commands

qos

QoS parameters

Command Mode

- /exec/configure

system release mod-lock uuid nodeid

system release mod-lock uuid <uuid-hex> nodeid <nodeid-hex>

Syntax Description

system

System management commands

release

release

mod-lock

module lock

uuid

uuid of the service holding the lock

uuid-hex

uuid

nodeid

node-id

nodeid-hex

nodeid

Command Mode

- /exec

system restart vdc service name

system restart vdc { <e-vdc2> | <vdc-id> } service name <s0>

Syntax Description

system

System management commands

restart

Restart a service

vdc

VDC number

e-vdc2

Enter VDC <vdc-id>

vdc-id

vdc number

service

Service to be restarted

name

Name of a service

s0

Name of service

Command Mode

- /exec/configure

system routing performance-mode

[no] system routing performance-mode

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

routing

Layer-3 routing

performance-mode

Performance Mode

Command Mode

- /exec/configure

system routing unknown-unicast-flood

[no] system routing unknown-unicast-flood

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

routing

Layer-3 routing

unknown-unicast-flood

Hardware flood post-routed traffic on SVI if dest-mac->layer2-port binding unknown

Command Mode

- /exec/configure

system shutdown fan-direction mismatch

system shutdown fan-direction mismatch | no system shutdown fan-direction mismatch

Syntax Description

no

Negate a command or set its defaults

system

System management commands

shutdown

Shutdown management commands

fan-direction

Fan-direction check

mismatch

Mismatch in check

Command Mode

- /exec/configure

system standby manual-boot

system standby manual-boot

Syntax Description

system

System management commands

standby

System standby management commands

manual-boot

No action taken to force-download standby sup

Command Mode

- /exec

system standby manual-boot

system no standby manual-boot

Syntax Description

system

System management commands

no

Negate a command or set its defaults

standby

System standby manual boot

manual-boot

No action taken to force-download standby sup

Command Mode

- /exec

system standby reload vdc

system standby reload vdc { <e-vdc2> | <i0> }

Syntax Description

system

System management commands

standby

System standby management commands

reload

Reload

vdc

vdc to reload

e-vdc2

Enter VDC <vdc-id>

i0

vdc number

Command Mode

- /exec

system startup-config init

system startup-config init

Syntax Description

system

System management commands

startup-config

System startup-config commands

init

Initialize the startup-configuration

Command Mode

- /exec

system startup-config kill config-update

system startup-config kill config-update

Syntax Description

system

System management commands

startup-config

System startup-config commands

kill

Kill configuration update

config-update

Kill configuration update

Command Mode

- /exec

system startup-config unlock

system startup-config unlock <i0>

Syntax Description

system

System management commands

startup-config

System startup-config commands

unlock

Unlock startup-config

i0

Startup-config lock id

Command Mode

- /exec

system statistics

system no statistics

Syntax Description

system

System management commands

no

Negate a command or set its defaults

statistics

disable the sysmgr statistics

Command Mode

- /exec

system statistics

system statistics

Syntax Description

system

System management commands

statistics

enables sysmgr statistics

Command Mode

- /exec

system switch-mode

system switch-mode { <mode> }

Syntax Description

system

System management commands

switch-mode

change switch operational mode

mode

switch mode

Command Mode

- /exec/configure

system switchover

system switchover

Syntax Description

system

System management commands

switchover

Switch over to the standby supervisor

Command Mode

- /exec

system switchover force

system switchover force

Syntax Description

system

System management commands

switchover

Switch over to the standby supervisor

force

Force switch over to the standby supervisor

Command Mode

- /exec

system swover-timeout-reset

[no] system swover-timeout-reset

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System management commands

swover-timeout-reset

switchover timeout and reset

Command Mode

- /exec

system trace

{ system trace <i0> | no system trace [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

trace

To configure system trace level

i0

Select the mask

Command Mode

- /exec/configure

system urpf disable

[no] system urpf disable

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System Management Commands

urpf

Manage urpf enable/disable

disable

disable

Command Mode

- /exec/configure

system vlan long-name

[no] system vlan long-name

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System management commands

vlan

Vlan commands

long-name

Configure 128 character VLAN names

Command Mode

- /exec/configure

system vlan nve-overlay id

[no] system vlan nve-overlay id <vrange>

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System management commands

vlan

Vlan commands

nve-overlay

nve overlay vlan

id

VLAN ID

vrange

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

system vlan reserve

system vlan <start-val> reserve | no system vlan <start-val> reserve

Syntax Description

system

system wide configuration

no

Select default reserved vlans group vlan 3968-4094

vlan

Vlan commands

start-val

minimum VLANs value

reserve

reservation

Command Mode

- /exec/configure

system vrf-member-change retain-l3-config

[no] system vrf-member-change retain-l3-config

Syntax Description

no

(Optional) Negate a command or set its defaults

system

System management commands

vrf-member-change

vrf member change

retain-l3-config

retain L3 configuration

Command Mode

- /exec/configure

system watchdog

system no watchdog

Syntax Description

system

System management commands

no

Negate a command or set its defaults

watchdog

enables watchdog

Command Mode

- /exec

system watchdog

system watchdog

Syntax Description

system

System management commands

watchdog

enables watchdog

Command Mode

- /exec

system watchdog kgdb

system watchdog kgdb

Syntax Description

system

System management commands

watchdog

enables watchdog

kgdb

enter kgdb on watchdog failure

Command Mode

- /exec

system watchdog kgdb

system no watchdog kgdb

Syntax Description

system

System management commands

no

Negate a command or set its defaults

watchdog

enables watchdog

kgdb

enter kgdb on watchdog failure

Command Mode

- /exec

Chapter 21. T Commands

- table-map

- table-map

- table-map

- table-map

- table-map

- table-map

- table-map

- table-map

- tac-pac

- tac-pac

- tacacs-server deadtime

- tacacs-server directed-request

- tacacs-server host key 0 6 7

- tacacs-server host test

- tacacs-server key 0 6 7

- tacacs-server test

- tacacs-server timeout

- tacacs enable

- tag

- tag happens in

- tahoe-python module

- tahoe-python module quoted

- tail

- tail

- tar

- tclsh

- tclsh

- tcp-connect

- telemetry

- telnet

- telnet6

- telnet login-attempts

- telnet server enable

- template

- template data timeout

- template peer-policy

- template peer-session

- template peer

- terminal

- terminal alias

- terminal ask-on-term

- terminal color

- terminal context management

- terminal deep-help

- terminal dont-ask

- terminal edit-mode vi

- terminal event-manager bypass

- terminal history no-exec-in-config

- terminal history no-exec-in-config

- terminal history no-exec-in-config

- terminal home

- terminal length

- terminal length

- terminal lock

- terminal log-all

- terminal no

- terminal output xml

- terminal output xml

- terminal output xml

- terminal password

- terminal prompt

- terminal redirection-mode

- terminal reset-role

- terminal reset vlan-config-mutex

- terminal session-timeout

- terminal sticky-mode

- terminal terminal-type

- terminal time

- terminal tree-update

- terminal unlock

- terminal verify-only

- terminal width

- terminal width

- threshold-percent

- threshold

- time-range

- timeout

- timer

- timers

- timers

- timers

- timers

- timers advertise

- timers basic

- timers bestpath-defer maximum

- timers bestpath-limit

- timers bgp

- timers lsa-arrival

- timers lsa-arrival

- timers lsa-group-pacing

- timers lsa-group-pacing

- timers prefix-peer-timeout

- timers prefix-peer-wait

- timers throttle lsa

- timers throttle lsa

- timers throttle spf

- timers throttle spf

- tls

- topology

- topology holddown sigerr

- tos

- tr

- trace buffer size

- traceroute

- traceroute6

- traceroute nve

- track-adjacency-nexthop

- track

- track

- track

- track

- track

- track

- track

- track

- track

- track

- track data

- track interface

- track interface priority

- track running-state track startup-state

- traffic-class

- traffic-share

- transmit-delay

- transmit-delay

- transmit-delay

- transport connection-mode passive

- transport email

- transport email mail-server

- transport http proxy enable

- transport http proxy server

- transport http use-vrf

- transport type tcp

- transport udp

- trigger forwarding distribution module

- trigger init ingress in-select 3 out-select 0

- trigger init ingress in-select 3 out-select 03

- trigger init ingress in-select 3 out-select 0 reverse

- trigger init ingress in-select 3 out-select 1

- trigger init ingress in-select 3 out-select 2

- trigger init ingress in-select 3 out-select 4

- trigger init ingress in-select 3 out-select 5

- trigger init ingress in-select 3 out-select 5 reverse

- trigger init ingress in-select 4 out-select 0

- trigger init ingress in-select 4 out-select 04

- trigger init ingress in-select 4 out-select 0 reverse

- trigger init ingress in-select 4 out-select 1

- trigger init ingress in-select 4 out-select 2

- trigger init ingress in-select 4 out-select 3

- trigger init ingress in-select 4 out-select 5

- trigger init ingress in-select 4 out-select 5 reverse

- trigger init ingress in-select 5 out-select 0

- trigger init ingress in-select 5 out-select 05

- trigger init ingress in-select 5 out-select 05 reverse

- trigger init ingress in-select 5 out-select 0 reverse

- trigger init ingress in-select 5 out-select 1

- trigger init ingress in-select 5 out-select 2

- trigger init ingress in-select 5 out-select 3

- trigger init ingress in-select 5 out-select 4

- trigger init ingress in-select 6 out-select 0

- trigger init ingress in-select 6 out-select 0 reverse

- trigger init ingress in-select 6 out-select 1

- trigger init ingress in-select 6 out-select 2

- trigger init ingress in-select 6 out-select 3

- trigger init ingress in-select 6 out-select 4

- trigger init ingress in-select 6 out-select 5

- trigger init ingress in-select 6 out-select 5 reverse

- trigger init ingress in-select 7 out-select 0

- trigger init ingress in-select 7 out-select 0 reverse

- trigger init ingress in-select 7 out-select 1

- trigger init ingress in-select 7 out-select 2

- trigger init ingress in-select 7 out-select 3

- trigger init ingress in-select 7 out-select 4

- trigger init ingress in-select 7 out-select 5

- trigger init ingress in-select 7 out-select 5 reverse

- trigger reset

- trigger route download vrf ipv4

- trustpoint server-identity

- ttag-marker-interval

- ttag-marker enable

- ttag

- ttl-security hops

- tunnel destination

- tunnel mode

- tunnel path-mtu-discovery

- tunnel path-mtu-discovery age-timer

- tunnel path-mtu-discovery min-mtu

- tunnel source

- tunnel ttl

- tunnel use-vrf

- type type

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Policy for filtering/modifying OSPFV3 routes before sending them to RIB

policy-name

Route-map name

filter

(Optional) To block the OSPFV3 routes from being sent to RIB

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Policy for filtering/modifying OSPF routes before sending them to RIB

policy-name

Route-map name

filter

(Optional) To block the OSPF routes from being sent to RIB

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

table-map

[no] table-map <table-map-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Configure a table map

table-map-name

Table map name

Command Mode

- /exec/configure

table-map

table-map <default-tmap-enum-name>

Syntax Description

table-map

Configure a table map

default-tmap-enum-name

Command Mode

- /exec/configure

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Table-map policy used to filter routes and tune attributes before downloading to RIB

filter

(Optional) Filter the routes based on policy results

policy-name

A 'routing-rules' route-map name

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv4

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Table-map policy used to filter routes and tune attributes before downloading to RIB

filter

(Optional) Filter the routes based on policy results

policy-name

A 'routing-rules' route-map name

Command Mode

- /exec/configure/router-isis/router-isis-af-ipv6

table-map

[no] table-map <map> [ filter ]

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Configure Table Map information

map

Route-map name

filter

(Optional) Filter routes which are rejected by route-map

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

table-map

[no] table-map <rmap-name> [ filter ]

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Apply table-map to filter routes downloaded into URIB

rmap-name

Route-map name

filter

(Optional) Selective route download

Command Mode

- /exec/configure/router-bgp/router-bgp-af

tac-pac

tac-pac [ <uri0> ]

Syntax Description

tac-pac

save tac info in a compressed .gz file at specific location

uri0

(Optional) Select destination filesystem

Command Mode

- /exec

tac-pac

tac-pac [ <uri0> [ vrf <vrf-known-name> ] ]

Syntax Description

tac-pac

save tac info in a compressed .gz file at specific location

uri0

(Optional) Select destination filesystem

vrf

(Optional) Display per-VRF information

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

tacacs-server deadtime

[no] tacacs-server deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes

Command Mode

- /exec/configure

tacacs-server directed-request

[no] tacacs-server directed-request

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

directed-request

enable direct authentication requests to server

Command Mode

- /exec/configure

tacacs-server host key 0 6 7

{ { [ no ] tacacs-server host { <hostipname> } { { key { 0 <s0> | 6 <s6> | 7 <s1> | <s2> } [ port <i1> ] [ timeout <i2> ] } | { [ port1 <i3> ] [ timeout1 <i4> ] } } } | { no tacacs-server host <hostipname> key } }

Syntax Description

key

0

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

host

TACACS+ server's DNS name or its IP address

hostipname

IPV4/IPV6 address or DNS name

key

TACACS+ shared secret

0

TACACS+ shared secret(clear text)

s0

TACACS+ shared secret(clear text)

port

(Optional) TACACS+ server port

i1

(Optional) TACACS+ server port

timeout

(Optional) TACACS+ server timeout period in seconds

i2

(Optional) TACACS+ server timeout period in seconds

6

TACACS+ shared secret(type-6 encrypted)

s6

TACACS+ shared secret(encrypted)

7

TACACS+ shared secret(encrypted)

s1

TACACS+ shared secret(encrypted)

port1

(Optional) TACACS+ server port

i3

(Optional) TACACS+ server port

timeout1

(Optional) TACACS+ server timeout period in seconds

i4

(Optional) TACACS+ server timeout period in seconds

s2

TACACS+ shared secret(clear text)

Command Mode

- /exec/configure

tacacs-server host test

[no] tacacs-server host <hostipnam> test { { username <s0> { [ password <s1> [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password <s1> [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

host

TACACS+ server's DNS name or its IP address

hostipnam

IPV4/IPV6 address or DNS name

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

- /exec/configure

tacacs-server key 0 6 7

{ { [ no ] tacacs-server key { 0 <s0> [ timeout <i0> ] | 6 <s6> [ timeout6 <i6> ] | 7 <s1> [ timeout1 <i1> ] | <s2> [ timeout2 <i2> ] } } | { no tacacs-server key } }

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

key

Global TACACS+ server shared secret

0

default TACACS+ shared secret(clear text)

s0

default TACACS+ shared secret(clear text)

timeout

(Optional) Global TACACS+ server timeout period in seconds

i0

(Optional) Global TACACS+ server timeout period in seconds

6

default TACACS+ shared secret(type-6 encrypted)

s6

default TACACS+ shared secret(type-6 encrypted)

timeout6

(Optional) Global TACACS+ server timeout period in seconds

i6

(Optional) Global TACACS+ server timeout period in seconds

7

default TACACS+ shared secret(encrypted)

s1

default TACACS+ shared secret(encrypted)

timeout1

(Optional) Global TACACS+ server timeout period in seconds

i1

(Optional) Global TACACS+ server timeout period in seconds

s2

default TACACS+ shared secret(clear text)

timeout2

(Optional) Global TACACS+ server timeout period in seconds

i2

(Optional) Global TACACS+ server timeout period in seconds

Command Mode

- /exec/configure

tacacs-server test

[no] tacacs-server test { { username <s0> { [ password <s1> [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password <s1> [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

- /exec/configure

tacacs-server timeout

[no] tacacs-server timeout <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

timeout

Global TACACS+ server timeout period in seconds

i0

Global TACACS+ server timeout period in seconds

Command Mode

- /exec/configure

tacacs enable

[no] tacacs + enable

Syntax Description

no

(Optional) Negate a command or set its defaults

enable

Enable tacacs+

Command Mode

- /exec/configure

tag

{ { no | default } tag | tag <text> }

Syntax Description

no

default

Set a command to its defaults

tag

User defined tag

text

Tag string line

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

tag happens in

[no] tag <tag_id> <op> <tag_id> [ <op> <tag_id> [ <op> <tag_id> ] ] happens <threshold> in <interval> | no tag

Syntax Description

no

(Optional) Negate a command or set its defaults

tag

event tag identifier

tag_id

tag name

op

boolean operator

happens

The number of occurrences before raising the event

threshold

Occurs value

in

Number of occurrences must occur within this time period

interval

Enter seconds value

Command Mode

- /exec/configure/event-manager-applet

tahoe-python module

tahoe-python module <module>

Syntax Description

tahoe-python

enter python mode for tahoe systems

module

Module number of the linecard

module

Enter module number

Command Mode

- /exec

tahoe-python module quoted

tahoe-python module <module> quoted <quoted-cmd>

Syntax Description

tahoe-python

enter python mode for tahoe systems

module

Module number of the linecard

module

Enter module number

quoted

enter the command with quotes Add multiple commands separated by semi-colon

quoted-cmd

the command(s) to run in tahoe python

Command Mode

- /exec

tail

| tail [ -n <lines> ]

Syntax Description

|

Pipe command output to filter

tail

Display last lines

-n

(Optional) modify number of lines (default 10)

lines

(Optional) number of lines to print

Command Mode

- /output

tail

tail <uri0> [ <i1> ]

Syntax Description

tail

Display the last part of a file

uri0

Filename to be displayed

i1

(Optional) Enter the number of lines to be displayed

Command Mode

- /exec

tar

tar { create <new-archive-file> [ gz-compress | bz2-compress | uncompressed ] + [ remove | absolute | verbose ] + <files> + | append <archive-file> [ remove | absolute | verbose ] + <files> + | extract <archive-file> [ screen | to <dest-dir> | keep-old | verbose ] + | list <archive-file> }

Syntax Description

tar

archiving operations

create

create an archive (merge several files together)

append

append some files to an existing archive

extract

extract files from archive (unmerge them)

verbose

(Optional) display files while merging/extracting

gz-compress

(Optional) compress archive with gzip, the default -> .tar.gz

bz2-compress

(Optional) compress archive with bzip2 -> .tar.bz2

uncompressed

(Optional) dont compress archive -> .tar

remove

(Optional) remove files after adding them to the archive

absolute

(Optional) don't strip leading `/'s from file names

keep-old

(Optional) don't replace existing files when extracting

screen

(Optional) extract files to screen

list

shows the list of files which are part of the archive

new-archive-file

the name of the archive (extension will be added if none of tar/tgz/tar.gz/tar.bz2/tbz2/tar.Z specified)

archive-file

the name of the archive (extension will be added if none of tar/tgz/tar.gz/tar.bz2/tbz2/tar.Z specified)

files

name of file to be added into archive

to

(Optional) extract to specific directory (default is bootflash)

dest-dir

(Optional) destination dir where to extract to (created if not exist), default is bootflash

Command Mode

- /exec

tclsh

tclsh <file> [ <args> ] +

Syntax Description

tclsh

source tclsh script

file

the file to run

args

(Optional) args to tcl script

Command Mode

- /exec

tclsh

tclsh

Syntax Description

tclsh

Execute tclsh

Command Mode

- /exec

tcp-connect

[no] tcp-connect { <hostname> | <ip-address> } <dest-port> { [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] } +

Syntax Description

no

(Optional)

control

(Optional) enable

source-ip-address

(Optional) <src-port>

tcp-connect

TCP Connect Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

dest-port

Port Number (Recommended port range between 1025-65534)

enable

(Optional) Enable control packets exchange (default)

disable

(Optional) Disable control packets exchange

source-ip

(Optional) Source address

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-port

(Optional) Source Port

src-port

(Optional) Port Number (Recommended port range between 1025-65534)

Command Mode

- /exec/configure/ip-sla

telemetry

[no] telemetry

Syntax Description

no

(Optional) Negate a command or set its default

telemetry

Command Mode

- /exec/configure

telnet

{ telnet { <so> | <host> } } [ <i0> ] [ [ source { <host_src> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ]

Syntax Description

telnet

Telnet to another system

so

Enter hostname

host

Enter a valid IPv4 address

source

(Optional) Set source address in IPv4 header

host_src

(Optional) Set IPV4 address as source

interface

(Optional) Set interface to send IPv4 packet

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

i0

(Optional) Enter the port number

Command Mode

- /exec

telnet6

{ telnet6 { <s1> | <host1> } } [ <i0> ] [ [ source { <host1_src> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ]

Syntax Description

telnet6

Telnet6 to another system using IPv6 addressing

s1

Enter hostname

source

(Optional) Set source address in IPv6 header

interface

(Optional) Set interface to send IPv6 packet

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

i0

(Optional) Enter the port number

Command Mode

- /exec

telnet login-attempts

{ { telnet login-attempts <d0> } | { no telnet login-attempts [ <d0> ] } }

Syntax Description

no

Negate a command or set its defaults

telnet

telnet login

login-attempts

Set maximum login attempts

d0

Specify max-attempt number

Command Mode

- /exec/configure/

telnet server enable

[no] telnet server enable

Syntax Description

no

(Optional) Negate a command or set its defaults

telnet

Enable telnet

server

Enable telnet

enable

Enable telnet

Command Mode

- /exec/configure

template

template <res-mgr-template-known-name-all>

Syntax Description

template

Change the template for this vdc

res-mgr-template-known-name-all

Resource template for this vdc

Command Mode

- /exec/configure/vdc

template data timeout

{ [ no ] template data timeout <time> | no template data timeout }

Syntax Description

template

Version 9 Template

data

Data

timeout

Template Data resend time

time

Time in seconds

Command Mode

- /exec/configure/nfm-exporter-v9

template peer-policy

[no] template peer-policy <peer-policy-template-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

template

Enter template command mode

peer-policy

Template configuration for policy parameters

peer-policy-template-name

Name of peer-policy template

Command Mode

- /exec/configure/router-bgp

template peer-session

[no] template peer-session <peer-session-template-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

template

Enter template command mode

peer-session

Template configuration for session parameters

peer-session-template-name

Name of peer-session template

Command Mode

- /exec/configure/router-bgp

template peer

[no] template peer <peer-template-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

template

Enter template command mode

peer

Template configuration for peer parameters

peer-template-name

Neighbor template name

Command Mode

- /exec/configure/router-bgp

terminal

terminal { monitor | no { monitor1 | monitor-force } }

Syntax Description

terminal

Set terminal line parameters

monitor

Copy Syslog output to the current terminal line

no

Negate a command or set its defaults

monitor1

Copy Syslog output to the current terminal line

monitor-force

Copy Syslog output to the current terminal line

Command Mode

- /exec

terminal alias

[no] terminal alias [ persist ] [ <alias-name> [ <command> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

alias

show aliases (if no arugments) create 'exec' aliases (not persistent). Persistent aliases are in config mode, see 'cli alias

persist

(Optional) add terminal alias to <username>.rc.cli file (auto-execed at login time)

alias-name

(Optional) Name of the alias. (if last argument: shows the value of that alias) Command lines can start with an alias and it will be expanded before parsing. An alias can also be used right after a pipe. The substitution text can contain things like '$1 $2' and those $<number> will be substituted by correspondingly numbered token from the command line starting the counting after the alias.

command

(Optional) Value of the alias (what the alias will be substituted with)

Command Mode

- /exec

terminal ask-on-term

[no] terminal ask-on-term <term>

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

ask-on-term

ask backend driven question on given terminal

term

the terminal (/dev/ptsX)

Command Mode

- /exec

terminal color

[no] terminal color [ persist ]

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

color

enable colorization of prompt(green if last command ok, red if error), command line (blue), output (default color)

persist

(Optional) add command to <username>.rc.cli file (auto-execed at login time)

Command Mode

- /exec

terminal context management

[no] terminal context management

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

context

set the vrf context

management

vrf context management

Command Mode

- /exec

terminal deep-help

[no] terminal deep-help

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

deep-help

enable cli syntax and list

Command Mode

- /exec

terminal dont-ask

[no] terminal dont-ask [ persist ]

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

dont-ask

Don't ask 'are you sure' questions, take default answer instead

persist

(Optional) add command to <username>.rc.cli file (auto-execed at login time)

Command Mode

- /exec

terminal edit-mode vi

[no] terminal edit-mode vi [ persist ]

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

edit-mode

set command line edition keys (vi or emacs emacs is default)

vi

edit like in vi by default in insert-mode, use ~ for command-mode

persist

(Optional) add command to <username>.rc.cli file (auto-execed at login time)

Command Mode

- /exec

terminal event-manager bypass

terminal [ <noarg> ] event-manager bypass

Syntax Description

terminal

Set terminal line parameters

noarg

(Optional)

event-manager

Event manager cli event

bypass

Bypass event manager cli event publish

Command Mode

- /exec

terminal history no-exec-in-config

[no] terminal history no-exec-in-config

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

history

configure terminal history properties

no-exec-in-config

don't recall exec commands while in config mode

Command Mode

- /exec

terminal history no-exec-in-config

[no] terminal history no-exec-in-config

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

history

configure terminal history properties

no-exec-in-config

don't recall exec commands while in config mode

Command Mode

- /exec

terminal history no-exec-in-config

[no] terminal history no-exec-in-config

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

history

configure terminal history properties

no-exec-in-config

don't recall exec commands while in config mode

Command Mode

- /exec

terminal home

terminal home

Syntax Description

terminal

Set terminal line parameters

home

go back to line 1 position 1 without erasing the screen (to be used in cli command loops)

Command Mode

- /exec

terminal length

terminal length <i0>

Syntax Description

terminal

Set terminal line parameters

length

Set number of lines on a screen

i0

Number of lines on screen (0 for no pausing)

Command Mode

- /exec/configure/console

terminal length

terminal length <i0>

Syntax Description

terminal

Set terminal line parameters

length

Set number of lines on a screen

i0

Number of lines on screen (0 for no pausing)

Command Mode

- /exec

terminal lock

terminal lock

Syntax Description

terminal

Set terminal line parameters

lock

Locks the CLI Config mode

Command Mode

- /exec

terminal log-all

[no] terminal log-all

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Configure terminal settings

log-all

Accounting log all commands including the show commands

Command Mode

- /exec/configure

terminal no

terminal no { length | terminal-type | width }

Syntax Description

terminal

Set terminal line parameters

no

Negate a command or set its defaults

length

Set number of lines on a screen

terminal-type

Set the terminal type

width

Set width of the display terminal

Command Mode

- /exec

terminal output xml

[no] terminal output xml <namespace-version>

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

output

how output of show commands should be formated

xml

xml output

namespace-version

enter the version for xml output

Command Mode

- /exec

terminal output xml

[no] terminal output xml

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

output

how output of show commands should be formated

xml

xml output

Command Mode

- /exec

terminal output xml

[no] terminal output xml

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

output

how output of show commands should be formated

xml

xml output

Command Mode

- /exec

terminal password

terminal password <password> | no terminal password [ <password> ]

Syntax Description

no

Negate a command or set its defaults

terminal

Set terminal line parameters

password

set a password to be used in copy scp/ftp commands use online help on the argument to disable echo so you don't need to type control-x-e twice (to toggle echo), echo will be re-enabled after carriage-return

password

Enter the password (online help that you just did disabled echo so type your password and press return

Command Mode

- /exec

terminal prompt

[no] terminal prompt [ fix [ <name> ] [ with-cr ] | mode | { fq-command | command } | status | exec-time | time | no-echo ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

prompt

configure how the prompt should look like

fix

(Optional) set the prompt to a fix name (default _prompt_)

with-cr

(Optional) add a carriage return at the end of the prompt

name

(Optional) name to use as a fix prompt

mode

(Optional) include the cli mode name (ex: config-if) into the promt

fq-command

(Optional) include the fully qualified command just executed (formatted like in accounting log)

command

(Optional) include the previous command (not including the mode and mode instance)

status

(Optional) include the status of previous command (0=success)

exec-time

(Optional) include the time it took to execute previous command

time

(Optional) include the time when prompt was printed

no-echo

(Optional) dont echo the typed characters

Command Mode

- /exec

terminal redirection-mode

terminal redirection-mode <mode>

Syntax Description

terminal

Set terminal line parameters

redirection-mode

Set the redirection mode

mode

Command Mode

- /exec

terminal reset-role

terminal reset-role <num>

Syntax Description

terminal

Set terminal line parameters

reset-role

Reset the privilege role to default

num

Enter the role num

Command Mode

- /exec

terminal reset vlan-config-mutex

terminal reset vlan-config-mutex

Syntax Description

terminal

Set terminal line parameters

reset

Force reset of the vlan config mode mutex

vlan-config-mutex

Vlan configuration mutex

Command Mode

- /exec

terminal session-timeout

terminal session-timeout <i0>

Syntax Description

terminal

Set terminal line parameters

session-timeout

Set session timeout

i0

Enter timeout in minutes, 0 to disable

Command Mode

- /exec

terminal sticky-mode

terminal [ <noarg> ] sticky-mode

Syntax Description

terminal

Set terminal line parameters

noarg

(Optional)

sticky-mode

Search for the command match in current mode only

Command Mode

- /exec

terminal terminal-type

terminal terminal-type <s0>

Syntax Description

terminal

Set terminal line parameters

terminal-type

Set the terminal type

s0

Terminal type

Command Mode

- /exec

terminal time

terminal time [ <name> ] [ delta ]

Syntax Description

terminal

Set terminal line parameters

time

save the current time under a variable

name

(Optional) the variable to store the time in

delta

(Optional) print the delta time to the currently saved time value

Command Mode

- /exec

terminal tree-update

terminal tree-update

Syntax Description

terminal

Set terminal line parameters

tree-update

Updates the main parse tree

Command Mode

- /exec

terminal unlock

terminal unlock

Syntax Description

terminal

Set terminal line parameters

unlock

Force unlocking of the CLI config mode

Command Mode

- /exec

terminal verify-only

terminal [ <noarg> ] verify-only [ username <user> ]

Syntax Description

terminal

Set terminal line parameters

noarg

(Optional)

verify-only

Verify command and do not execute

username

(Optional) Username for aaa authorization

user

(Optional) Username for aaa authorization

Command Mode

- /exec

terminal width

terminal width <i0>

Syntax Description

terminal

Set terminal line parameters

width

Set width of the display terminal

i0

Number of characters on a screen line

Command Mode

- /exec/configure/console

terminal width

terminal width <i0>

Syntax Description

terminal

Set terminal line parameters

width

Set width of the display terminal

i0

Number of characters on a screen line

Command Mode

- /exec

threshold-percent

threshold-percent { percent-threshold { percentup <up-percentage> [ percentdown<down-percentage> ] | percentdown<down-percentage> [ percentup <up-percentage> ] } } | no threshold-percent { percent-threshold }

Syntax Description

no

Negate a command or set its defaults

threshold-percent

Threshold parameters

percent-threshold

Percentage threshold

percentup

Up threshold

up-percentage

Up threshold percentage

Command Mode

- /exec/configure/tr-list-thrp

threshold

{ { no | default } threshold | threshold <milliseconds> }

Syntax Description

no

default

Set a command to its defaults

threshold

Operation threshold

milliseconds

Millisecond threshold value

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

time-range

[no] time-range <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

time-range

Define time range entries

name

Time range name

Command Mode

- /exec/configure

timeout

{ { no | default } timeout |

Syntax Description

no

default

Set a command to its defaults

timeout

Timeout of an operation

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

timer

timer <value> | no timer

Syntax Description

no

Negate a command or set its defaults

timer

Configure Bundle timer value

value

Hello timer value

Command Mode

- /exec/configure/anycast

timers

timers <keepalive-interval> <hold-time> | { no | default } timers [ <keepalive-interval> <hold-time> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

timers

Configure keepalive and hold timers

keepalive-interval

Keepalive interval (seconds)

hold-time

Holdtime (seconds)

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

timers

timers { <hello-time> { <hold-time> | ms-hold <hold-time-msec> } | ms-hello <hello-time-msec> { <hold-time-sec> | msec-hold <hold-time-msec> } | redirect <redirect-time> <sec-hold-time> } | no timers [ { <hello-time> [ { <hold-time> | ms-hold <hold-time-msec> } ] | ms-hello [ <hello-time-msec> [ <hold-time-sec> | msec-hold <hold-time-msec> ] ] | redirect [ <redirect-time> [ <sec-hold-time> ] ] } ]

Syntax Description

no

Negate a command or set its defaults

timers

Adjust GLBP timers

hello-time

Specify Hello interval in seconds

hold-time

Specify Hold time in seconds

ms-hold

Specify hold time in milliseconds

hold-time-msec

Hold time in milliseconds

ms-hello

Specify hello interval in milliseconds

hello-time-msec

hello interval in milliseconds

hold-time-sec

Hold time in seconds

msec-hold

Specify hold time in milliseconds

redirect

Specify time-out value for failed forwarders

redirect-time

Interval in seconds to redirect to failed forwarders

sec-hold-time

Time-out interval in seconds for failed forwarders

Command Mode

- /exec/configure/if-eth-any/glbp

timers

[no] timers { nsf { route-hold <hold-interval> | converge <converge-interval> | signal <signal-interval> } | active-time [ <max-active-time> | disabled ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

timers

Set EIGRP timers

nsf

EIGRP NSF timer

route-hold

EIGRP hold time for routes learned from nsf peer

hold-interval

Seconds

active-time

EIGRP time limit for active state

max-active-time

(Optional) EIGRP active-state time limit in minutes

disabled

(Optional) disable EIGRP time limit for active state

converge

EIGRP time limit for convergence after switchover

converge-interval

Seconds

signal

EIGRP time limit for signaling NSF restart

signal-interval

Seconds

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

timers

timers { <hello-time> { <hold-time> | msec-hold <msec-hold> } | msec-hello <msec-hello> { <hold-time> | msec-hold <msec-hold> } } | no timers

Syntax Description

no

Negate a command or set its defaults

timers

Hello and hold timers

hello-time

Hello interval in seconds

hold-time

Hold time in seconds

msec-hold

Specify hold interval in milliseconds

msec-hold

Hold interval in milliseconds

msec-hello

Specify hello interval in milliseconds

msec-hello

Hello interval in milliseconds

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

timers advertise

[no] timers advertise | timers advertise <val>

Syntax Description

no

Negate a command or set its defaults

timers

Set the VRRP timers

advertise

Set the advertise timer

val

Advertisement interval in milliseconds

Command Mode

- /exec/configure/if-eth-any/vrrpv3

timers basic

timers basic <update> <invalid> <holddown> <garbage> | no timers basic [ <update> <invalid> <holddown> <garbage> ]

Syntax Description

no

Negate a command or set its defaults

timers

RIP set timers

basic

RIP set basic timers

update

RIP update period

invalid

RIP route timeout period

holddown

RIP route holddown period

garbage

RIP route garbage period

Command Mode

- /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

timers bestpath-defer maximum

[no] timers bestpath-defer <bestpath-defer-time> maximum <bestpath-defer-time-max>

Syntax Description

no

(Optional) Negate a command or set its defaults

timers

Configure bgp related timers

bestpath-defer

Configure bestpath defer timer value for batch prefix processing

bestpath-defer-time

Bestpath defer time (mseconds)

maximum

Configure bestpath defer timer maximum value

bestpath-defer-time-max

Maximum bestpath defer time (mseconds)

Command Mode

- /exec/configure/router-bgp/router-bgp-af

timers bestpath-limit

timers bestpath-limit <bestpath-timeout> [ always ] | no timers bestpath-limit [ <bestpath-timeout> ]

Syntax Description

no

Negate a command or set its defaults

timers

Configure bgp related timers

bestpath-limit

Configure timeout for first bestpath after restart

bestpath-timeout

Bestpath timeout (seconds)

always

(Optional) Configure update-delay-always option

Command Mode

- /exec/configure/router-bgp/vrf-cmds

timers bgp

[no] timers bgp <keepalive-interval> <hold-time>

Syntax Description

no

(Optional) Negate a command or set its defaults

timers

Configure bgp related timers

bgp

Configure different bgp keepalive and holdtimes

keepalive-interval

Keepalive interval (seconds)

hold-time

Holdtime (seconds)

Command Mode

- /exec/configure/router-bgp/vrf-cmds

timers lsa-arrival

{ { timers lsa-arrival <interval> } | { no timers lsa-arrival [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-arrival

Mimimum interval between arrival of a LSA

interval

Interval value (milliseconds)

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers lsa-arrival

{ { timers lsa-arrival <interval> } | { no timers lsa-arrival [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-arrival

Mimimum interval between arrival of a LSA

interval

Interval value (millisecond)

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

timers lsa-group-pacing

{ { timers lsa-group-pacing <interval> } | { no timers lsa-group-pacing [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-group-pacing

LSA group refresh/maxage interval

interval

Interval value (seconds)

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers lsa-group-pacing

{ { timers lsa-group-pacing <interval> } | { no timers lsa-group-pacing [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-group-pacing

LSA group refresh/maxage interval

interval

Interval value (seconds)

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

timers prefix-peer-timeout

timers prefix-peer-timeout <prefixpeer-timeout> | no timers prefix-peer-timeout [ <prefixpeer-timeout> ]

Syntax Description

no

Negate a command or set its defaults

timers

Configure bgp related timers

prefix-peer-timeout

Configure how long state for a prefix peer is maintained

prefixpeer-timeout

Prefix Peer timeout (seconds)

Command Mode

- /exec/configure/router-bgp/vrf-cmds

timers prefix-peer-wait

timers prefix-peer-wait <prefixpeer-wait> | no timers prefix-peer-wait [ <prefixpeer-wait> ]

Syntax Description

no

Negate a command or set its defaults

timers

Configure bgp related timers

prefix-peer-wait

Configure wait timer for a prefix peer

prefixpeer-wait

Prefix peer wait timer (seconds)

Command Mode

- /exec/configure/router-bgp/vrf-cmds

timers throttle lsa

{ { timers throttle lsa <start-time> <hold-time> <max-time> } | { no timers throttle lsa [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Set rate-limiting values (milliseconds)

lsa

Set rate-limiting for LSA generation

start-time

Start interval (milliseconds)

hold-time

Hold interval (milliseconds)

max-time

Max interval (milliseconds)

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers throttle lsa

{ { timers throttle lsa <start-time> <hold-time> <max-time> } | { no timers throttle lsa [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Set rate-limiting values (milliseconds)

lsa

Set rate-limiting for LSA generation

start-time

Start interval (milliseconds)

hold-time

Hold interval (milliseconds)

max-time

Max interval (milliseconds)

Command Mode

- /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

timers throttle spf

{ { timers throttle spf <start-time> <hold-time> <max-time> } | { no timers throttle spf [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Configure timer related constants

spf

OSPF SPF timers

start-time

Initial SPF schedule delay in milliseconds

hold-time

Minimum hold time between SPF calculations

max-time

Maximum wait time between SPF calculations

Command Mode

- /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers throttle spf

{ { timers throttle spf <start-time> <hold-time> <max-time> } | { no timers throttle spf [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Configure timer related constants

spf

OSPF SPF timers

start-time

Initial SPF schedule delay in milliseconds

hold-time

Minimum hold time between SPF calculations

max-time

Maximum wait time between SPF calculations

Command Mode

- /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

tls

[no] tls

Syntax Description

no

(Optional) Negate a command or set its defaults

tls

One Platform TLS transport configuration mode

Command Mode

- /exec/configure/onep

topology

[no] topology <tpg-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

topology

Configure Layer-2 Topology for IS-IS

tpg-id

L2 Topology ID 1-63

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

topology holddown sigerr

[no] topology holddown sigerr | topology holddown sigerr <sec>

Syntax Description

no

Negate a command or set its defaults

topology

Topology Database Configuration

holddown

Topology Database hold down timers

sigerr

Link hold down time for signalling errors

sec

Hold down time in seconds

Command Mode

- /exec/configure/te

tos

{ { no | default } tos | tos <tos-value> }

Syntax Description

no

default

Set a command to its defaults

tos

Type of Service

tos-value

Type of Service Value

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/http

tr

| tr [ -c | -d | -s | -t ] + <SET1> [ <SET2> ]

Syntax Description

|

Pipe command output to filter

tr

Translate, squeeze, and/or delete characters

-c

(Optional) first complement SET1

-d

(Optional) delete characters in SET1, do not translate

-s

(Optional) replace each sequence of a repeated character from SET1 with single occurrence of that character

-t

(Optional) first truncate SET1 to length of SET2

SET1

character SET1: CHAR1-CHAR2 = all characters from CHAR1 to CHAR2 in ascending order special chars: (tab) (new line) [:alnum:] [:alpha:] [:digit:] [:graph:] (printable, no space) [:print:] (printable, with space) [:lower:] [:upper:] [:space:] (tab or space)

SET2

(Optional) character SET2 (for translation length is extended to length of SET1 by repeating last char, excess chars are ignored): format same as SET1 [CHAR*] = copies of CHAR until length of SET1 [CHAR*REPEAT] = REPEAT copies of CHAR

Command Mode

- /output

trace buffer size

trace buffer { error | warning | event } size <size>

Syntax Description

trace

MPLS static trace

buffer

MPLS static trace buffer

error

MPLS static error trace

warning

MPLS static warning trace

event

MPLS static event trace

size

trace buffer size in Kbytes

size

trace buffer size in Kbytes

Command Mode

- /exec/configure/mpls_static

traceroute

traceroute { <host> | <hostname> } [ port <portnumber> ] [ [ source-interface <src-intf> ] | [ [ source { <host> | <hostname> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] ]

Syntax Description

traceroute

Traceroute

host

IP address of remote system

hostname

Hostname of remote system

port

(Optional) Set destination port

portnumber

(Optional) Enter destination port number

source

(Optional) Set source address in IP header

interface

(Optional) Interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source-interface

(Optional) Select source interface

src-intf

(Optional) Specify interface

Command Mode

- /exec

traceroute6

traceroute6 { <host> | <hostname> } [ [ [ source { <host> | <hostname> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] | [ source-interface <src-intf> ] ]

Syntax Description

traceroute6

Traceroute6

hostname

Hostname of remote system

source

(Optional) Set source address in IPv6 header

interface

(Optional) Interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source-interface

(Optional) Select source interface

src-intf

(Optional) Specify interface

Command Mode

- /exec

traceroute nve

traceroute nve { { { { ip { <numeric10> | <numeric11> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> <intfid> } [ profile <pid> ] [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] } payload-end ] [ source { <numeric1> | <numeric2> } |

Syntax Description

traceroute

Test

nve

network virtualization edge

numeric10

Ipv4 address of remote host / VTEP

unknown

Peer vtep ip is unknown, will be derived from payload

intfid

Name of the interface for ngoam traceroute on which dot1q is configured

profile

(Optional) NGOAM profile to use

pid

(Optional) NGOAM profile id

mac

Mac

dmac

Destination mac address

dot1qid

Encapsulation dot1q/bd on which the mac is learnt

dot1qid1

(Optional) Encapsulation dot1q/bd on which the mac is learnt

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source

(Optional) Source

numeric1

(Optional) IP

payload

(Optional) Enter customer payload

mac-addr

(Optional) Mac

dstmac

(Optional) Destination mac address

smac

(Optional) Source mac address

dot1q

(Optional) Encapsulation dot1q/bd

dot1q-id

(Optional) Encapsulation dot1q/bd on which the mac is learnt

ip

ip address

dstip

(Optional) Destination ipv4 address

srcip

(Optional) source ipv4 address

ipv6

(Optional) ipv6 address

port

(Optional) L4 port info

sport

(Optional) Source port

dport

(Optional) Destination port

proto

(Optional) Protocol

proto-id

(Optional) IANA Protocol id

payload-end

(Optional) End payload info input

Command Mode

- /exec

track-adjacency-nexthop

[no] track-adjacency-nexthop

Syntax Description

no

(Optional) Negate a command or set its defaults

track-adjacency-nexthop

Track next-hop for same-site Overlay adjacencies

Command Mode

- /exec/configure/otv-isis

track

track <object-id> { list { boolean <bool-val> } }

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

list

Object tracking list

boolean

boolean list type

bool-val

boolean list type

Command Mode

- /exec/configure

track

track <object-id>

Syntax Description

track

Object tracking deletion command

object-id

Tracked Object

Command Mode

- /exec/configure

track

[no] track <object-id> [ force ]

Syntax Description

no

Negate a command or set its defaults

track

Object tracking deletion command

object-id

Tracked Object

force

(Optional) Completely remove the object

Command Mode

- /exec/configure

track

track <object-id> { { ip_v4 route <route-prefix> reachability [ hmm ] } | { ip_v6 routev6 <v6route-prefix> reachability [ hmm ] } }

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

ip_v4

IPv4 protocol

route

IPv4 route

route-prefix

Specify ipv4 route prefix

ip_v6

IPv6 protocol

routev6

IPv6 route

reachability

Route reachability state

hmm

(Optional) Track routes owned by hmm

Command Mode

- /exec/configure

track

track <object-id> { ip_v4 sla <sla-id> [ sla_reachability | sla_state ] }

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

ip_v4

IPv4 protocol

sla

IP Service Level Agreement

sla-id

Entry number

sla_reachability

(Optional) Reachability

sla_state

(Optional) return code state

Command Mode

- /exec/configure

track

track <object-id> { list threshold <weight-val> }

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

list

Object tracking list

threshold

threshold type

weight-val

threshold weight type

Command Mode

- /exec/configure

track

track <object-id> { list threshold <percentage-val> }

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

list

Object tracking list

threshold

threshold type

percentage-val

threshold percentage type

Command Mode

- /exec/configure

track

track <track-obj> | no track <track-obj>

Syntax Description

no

Negate a command or set its defaults

track

Tracking object to suspend vPC if object goes down

track-obj

Tracked object

Command Mode

- /exec/configure/vpc-domain

track

[no] track <object-number> [ decrement <value> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

track

Associates track object to HSRP group

object-number

Set the object number to the group

decrement

(Optional) Decrements when tracked object goes down

value

(Optional) Set the value to decrement from priority

Command Mode

- /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

track

track <object-number> | no track

Syntax Description

no

Negate a command or set its defaults

track

Associates track object to Anycast Bundle

object-number

Set the object number

Command Mode

- /exec/configure/anycast

track data

[no] track data <loc-uri>

Syntax Description

no

(Optional) Negate a command or set its defaults

data

User files to preserve

track

Track file uri

loc-uri

Enter file uri

Command Mode

- /exec/configure/personality

track interface

track <object-id> interface <ifnum> { line-protocol | ipv4 routing | ipv6 routingv6 }

Syntax Description

track

Object tracking configuration commands

object-id

Tracked Object

interface

Interface to track

ifnum

Interface type and number

line-protocol

Track interface line-protocol

ipv4

IPv4 parameters

routing

Track interface ipv4 routing

ipv6

IPv6 parameters

routingv6

Track interface ipv6 routing

Command Mode

- /exec/configure

track interface priority

{ { track { { interface <intf_num> priority <priority_value> } | { <object-num> [ decrement <decrement-value> ] } } } | { no track [ { { interface <intf_num> priority <priority_value> } | { <object-num> [ decrement <decrement-value> ] } } ] } }

Syntax Description

no

Negate a command or set its defaults

track

Track the availability of another interface/object

interface

Select the tracked interface(Native tracking)

intf_num

priority

Vr priority used when the tracked interface is down

priority_value

object-num

Set the object number to the group(Object tracking)

decrement

(Optional) Decrements priority when tracked object goes down

decrement-value

(Optional) Set the value to decrement from priority

Command Mode

- /exec/configure/if-eth-any/vrrp

track running-state track startup-state

[no] track running-state | [ no ] track startup-state

Syntax Description

no

(Optional) Negate a command or set its defaults

track

Track file uri

running-state

active patches, third-party RPMs, and running-config

startup-state

committed patches, third-party RPMs, and startup-config

Command Mode

- /exec/configure/personality

traffic-class

{ { no | default } traffic-class | traffic-class <traffic-class> }

Syntax Description

no

default

Set a command to its defaults

traffic-class

Traffic Class

traffic-class

Traffic Class Value

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/http

traffic-share

[no] traffic-share { balanced | { min across-interfaces } }

Syntax Description

no

(Optional) Negate a command or set its defaults

traffic-share

How to compute traffic share over alternate paths

balanced

Share inversely proportional to metric

min

All traffic shared among min metric paths

across-interfaces

Use different interfaces for equal-cost paths

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

transmit-delay

{ { transmit-delay <delay> } | { no transmit-delay [ <delay> ] } }

Syntax Description

no

Negate a command or set its defaults

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode

- /exec/configure/router-ospf/vrf/router-ospf-slink

transmit-delay

{ { transmit-delay <delay> } | { no transmit-delay [ <delay> ] } }

Syntax Description

no

Negate a command or set its defaults

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode

- /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

transmit-delay

{ { transmit-delay <delay> } | { no transmit-delay [ <delay> ] } }

Syntax Description

no

Negate a command or set its defaults

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode

- /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

transport connection-mode passive

[ no | default ] transport connection-mode passive

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

transport

BGP transport connection

connection-mode

Specify type of connection

passive

Allow passive connection setup only

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-neighbor-stmp /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor

transport email

{ transport email { from <s0> | reply-to <s1> | smtp-server { <hostipv4> | <hostipv6> | <hostname> } [ port <i1> ] [ use-vrf <s2> ] } | no transport email smtp-server | no transport email { from | reply-to } }

Syntax Description

no

Negate a command or set its defaults

transport

Configure transport related configuration

email

Configure email transport related configuration

from

Configure from email address

s0

Provide from email address, example: SJ-9500-1@xyz.com

reply-to

Configure replyto email address

s1

Provide reply-to email address, example: admin@xyz.com

smtp-server

Configure SMTP server address

hostname

SMTP server(DNS name or IPv4 or IPv6 address)

hostipv4

IPV4 address of SMTP server

port

(Optional) Configure SMTP server port (default:25)

i1

(Optional) SMTP server port

use-vrf

(Optional) Configure vrf name

s2

(Optional) vrf name

Command Mode

- /exec/configure/callhome

transport email mail-server

{ [ no ] transport email mail-server { <hostipv4> | <hostipv6> | <hostname> } [ port <i1> ] [ priority <i2> ] [ use-vrf <s2> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

transport

Configure transport related configuration

email

Configure email transport related configuration

mail-server

Configure SMTP server address (for supporting multiple SMTP-servers)

hostname

SMTP server(DNS name or IPv4 or IPv6 address)

hostipv4

IPV4 address of SMTP server

port

(Optional) Configure SMTP server port (default:25)

i1

(Optional) SMTP server port

use-vrf

(Optional) Configure vrf name

s2

(Optional) vrf name

priority

(Optional) Configure SMTP server priority (1-100) (default:50)

i2

(Optional) SMTP server priority

Command Mode

- /exec/configure/callhome

transport http proxy enable

[no] transport http proxy enable

Syntax Description

no

(Optional) Negate a command or set its defaults

transport

Configure transport related configuration

http

Configure transport option for http urls

proxy

Configure proxy for http transport

enable

Enable the usage of proxy server for messages sent over http(s)

Command Mode

- /exec/configure/callhome

transport http proxy server

{ transport http proxy server { <hostname> } [ port <i1> ] } | { no transport http proxy server }

Syntax Description

no

Negate a command or set its defaults

transport

Configure transport related configuration

http

Configure transport option for http urls

proxy

Configure proxy for http transport

server

Configure proxy server address and port

hostname

Proxy server name or IP address(DNS name or IPv4 or IPv6 address)

port

(Optional) Configure Proxy server port (default:8080)

i1

(Optional) Proxy server port

Command Mode

- /exec/configure/callhome

transport http use-vrf

transport http use-vrf <s2> | no transport http use-vrf

Syntax Description

no

Negate a command or set its defaults

transport

Configure transport related configuration

http

Configure transport option for http urls

use-vrf

Configure vrf name

s2

vrf name

Command Mode

- /exec/configure/callhome

transport type tcp

[no] transport type { { tcp [ port <tportnum> ] [ access-class <aclname> ] } | { tls [ { disable-remotecert-validation [ { localcert <localtp> [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { access-class <aclname> [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } ] } | { localcert <localtp> [ { disable-remotecert-validation [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { disable-remotecert-validation [ access-class <aclname> ] } | { access-class <aclname> [ disable-remotecert-validation ] } ] } | { access-class <aclname> [ { disable-remotecert-validation [ port <tportnum> ] } | { port <tportnum> [ disable-remotecert-validation ] } ] } ] } | { port <tportnum> [ { disable-remotecert-validation [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { disable-remotecert-validation [ access-class <aclname> ] } | { access-class <aclname> [ disable-remotecert-validation ] } ] } | { access-class <aclname> [ { disable-remotecert-validation [ localcert <localtp> ] } | { localcert <localtp> [ disable-remotecert-validation ] } ] } ] } | { access-class <aclname> [ { disable-remotecert-validation [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { disable-remotecert-validation [ port <tportnum> ] } | { port <tportnum> [ disable-remotecert-validation ] } ] } | { port <tportnum> [ { disable-remotecert-validation [ localcert <localtp> ] } | { localcert <localtp> [ disable-remotecert-validation ] } ] } ] } | { remotecert <remotetp> [ { localcert <localtp> [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { access-class <aclname> [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } ] } | { localcert <localtp> [ { remotecert <remotetp> [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { remotecert <remotetp> [ access-class <aclname> ] } | { access-class <aclname> [ remotecert <remotetp> ] } ] } | { access-class <aclname> [ { remotecert <remotetp> [ port <tportnum> ] } | { port <tportnum> [ remotecert <remotetp> ] } ] } ] } | { port <tportnum> [ { remotecert <remotetp> [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { remotecert <remotetp> [ access-class <aclname> ] } | { access-class <aclname> [ remotecert <remotetp> ] } ] } | { access-class <aclname> [ { remotecert <remotetp> [ localcert <localtp> ] } | { localcert <localtp> [ remotecert <remotetp> ] } ] } ] } | { access-class <aclname> [ { remotecert <remotetp> [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { remotecert <remotetp> [ port <tportnum> ] } | { port <tportnum> [ remotecert <remotetp> ] } ] } | { port <tportnum> [ { remotecert <remotetp> [ localcert <localtp> ] } | { localcert <localtp> [ remotecert <remotetp> ] } ] } ] } ] } }

Syntax Description

no

(Optional) Negate a command or set its defaults

transport

Transport command

type

Session transport

tcp

TCP transport

tls

TLS transport

disable-remotecert-validation

(Optional) Disable Remote Certificate Validation

localcert

(Optional) Local Certificate

localtp

(Optional) Local Trust Point Name

remotecert

(Optional) Remote Certificate Validation

remotetp

(Optional) Remote Trust Point Name

port

(Optional) Port number

tportnum

(Optional) Number

access-class

(Optional) Filter incoming connections based on IP access list

aclname

(Optional) IP access list name

Command Mode

- /exec/configure/onep

transport udp

{ [ no ] transport udp <portnumber> | no transport udp }

Syntax Description

transport

Transport Destination Port

udp

Destination UDP Port

portnumber

Destination UDP Port

Command Mode

- /exec/configure/nfm-exporter

trigger forwarding distribution module

trigger forwarding distribution module <module>

Syntax Description

trigger

Trigger

forwarding

Trigger related to forwarding

distribution

Trigger distribution of forwarding data to LCs

module

distribute to a particular module

module

module number

Command Mode

- /exec

trigger init ingress in-select 3 out-select 0

trigger init { ingress | egress } in-select 3 out-select 0

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

3

outerl2-outerl3-outerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 3 out-select 03

trigger init { ingress | egress } in-select 3 out-select 03

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

03

pkt_lsb

3

outerl2-outerl3-outerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 3 out-select 0 reverse

trigger init { ingress | egress } in-select 3 out-select 0 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

3

outerl2-outerl3-outerl4

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 3 out-select 1

trigger init { ingress | egress } in-select 3 out-select 1

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

1

pkt_fifo_lsb

3

outerl2-outerl3-outerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 3 out-select 2

trigger init { ingress | egress } in-select 3 out-select 2

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

2

pkt_fifo_msb

3

outerl2-outerl3-outerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 3 out-select 4

trigger init { ingress | egress } in-select 3 out-select 4

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

4

pkt_msb

3

outerl2-outerl3-outerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 3 out-select 5

trigger init { ingress | egress } in-select 3 out-select 5

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

3

outerl2-outerl3-outerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 3 out-select 5 reverse

trigger init { ingress | egress } in-select 3 out-select 5 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

3

outerl2-outerl3-outerl4

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 0

trigger init { ingress | egress } in-select 4 out-select 0

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

4

innerl2-innerl3-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 04

trigger init { ingress | egress } in-select 4 out-select 04

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

04

pkt_msb

4

innerl2-innerl3-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 0 reverse

trigger init { ingress | egress } in-select 4 out-select 0 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

4

innerl2-innerl3-innerl4

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 1

trigger init { ingress | egress } in-select 4 out-select 1

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

1

pkt_fifo_lsb

4

innerl2-innerl3-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 2

trigger init { ingress | egress } in-select 4 out-select 2

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

2

pkt_fifo_msb

4

innerl2-innerl3-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 3

trigger init { ingress | egress } in-select 4 out-select 3

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

3

pkt_lsb

4

innerl2-innerl3-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 5

trigger init { ingress | egress } in-select 4 out-select 5

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

4

innerl2-innerl3-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 4 out-select 5 reverse

trigger init { ingress | egress } in-select 4 out-select 5 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

4

innerl2-innerl3-innerl4

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 0

trigger init { ingress | egress } in-select 5 out-select 0

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

5

outerl2-innerl2

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 05

trigger init { ingress | egress } in-select 5 out-select 05

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

05

sideband

5

outerl2-innerl2

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 05 reverse

trigger init { ingress | egress } in-select 5 out-select 05 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

05

sideband

5

outerl2-innerl2

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 0 reverse

trigger init { ingress | egress } in-select 5 out-select 0 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

5

outerl2-innerl2

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 1

trigger init { ingress | egress } in-select 5 out-select 1

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

1

pkt_fifo_lsb

5

outerl2-innerl2

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 2

trigger init { ingress | egress } in-select 5 out-select 2

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

2

pkt_fifo_msb

5

outerl2-innerl2

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 3

trigger init { ingress | egress } in-select 5 out-select 3

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

3

pkt_lsb

5

outerl2-innerl2

Command Mode

- /exec/elamns

trigger init ingress in-select 5 out-select 4

trigger init { ingress | egress } in-select 5 out-select 4

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

4

pkt_msb

5

outerl2-innerl2

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 0

trigger init { ingress | egress } in-select 6 out-select 0

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

6

outerl3-innerl3

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 0 reverse

trigger init { ingress | egress } in-select 6 out-select 0 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

6

outerl3-innerl3

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 1

trigger init { ingress | egress } in-select 6 out-select 1

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

1

pkt_fifo_lsb

6

outerl3-innerl3

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 2

trigger init { ingress | egress } in-select 6 out-select 2

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

2

pkt_fifo_msb

6

outerl3-innerl3

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 3

trigger init { ingress | egress } in-select 6 out-select 3

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

3

pkt_lsb

6

outerl3-innerl3

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 4

trigger init { ingress | egress } in-select 6 out-select 4

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

4

pkt_msb

6

outerl3-innerl3

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 5

trigger init { ingress | egress } in-select 6 out-select 5

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

6

outerl3-innerl3

Command Mode

- /exec/elamns

trigger init ingress in-select 6 out-select 5 reverse

trigger init { ingress | egress } in-select 6 out-select 5 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

6

outerl3-innerl3

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 0

trigger init { ingress | egress } in-select 7 out-select 0

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

7

outerl4-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 0 reverse

trigger init { ingress | egress } in-select 7 out-select 0 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

7

outerl4-innerl4

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 1

trigger init { ingress | egress } in-select 7 out-select 1

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

1

pkt_fifo_lsb

7

outerl4-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 2

trigger init { ingress | egress } in-select 7 out-select 2

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

2

pkt_fifo_msb

7

outerl4-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 3

trigger init { ingress | egress } in-select 7 out-select 3

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

3

pkt_lsb

7

outerl4-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 4

trigger init { ingress | egress } in-select 7 out-select 4

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

4

pkt_msb

7

outerl4-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 5

trigger init { ingress | egress } in-select 7 out-select 5

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

7

outerl4-innerl4

Command Mode

- /exec/elamns

trigger init ingress in-select 7 out-select 5 reverse

trigger init { ingress | egress } in-select 7 out-select 5 reverse

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

7

outerl4-innerl4

reverse

Program reverse ELAM

Command Mode

- /exec/elamns

trigger reset

trigger reset

Syntax Description

trigger

Define A Trigger

reset

Reset triggers

Command Mode

- /exec/elamns

trigger route download vrf ipv4

trigger route download vrf <vrf-name> { ipv4 <route4> | ipv6 <route6> } [ module <slot-num> ]

Syntax Description

trigger

Trigger

route

IP route related

download

Download

vrf

vrf

vrf-name

vrf name

ipv4

ipv4

route4

ipv4 prefix

ipv6

ipv6

module

(Optional) Module

slot-num

(Optional) Slot number of the module

Command Mode

- /exec

trustpoint server-identity

{ trustpoint server-identity <tp-server> } | { no trustpoint server-identity [ <tp-server> ] } | { [ no ] trustpoint client-verification <tp-client> }

Syntax Description

no

Negate a command or set its defaults

trustpoint

Trustpoint configuration

server-identity

Server trustpoint

tp-server

Trustpoint name

client-verification

Client trustpoint

tp-client

Trustpoint name

Command Mode

- /exe/configure/onep/tls

ttag-marker-interval

[no] ttag-marker-interval <seconds>

Syntax Description

no

(Optional) Negate a command or set its defaults

ttag-marker-interval

Marker packet interval

seconds

Interval in seconds

Command Mode

- /exec/configure

ttag-marker enable

[no] ttag-marker enable

Syntax Description

no

(Optional) Negate a command or set its defaults

ttag-marker

Enable/Disable marker packet on interface

enable

Enable/Disable marker packet on interface

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ttag

[no] ttag

Syntax Description

no

(Optional) Negate a command or set its defaults

ttag

enable ingress packet with ttag on this interface

Command Mode

- /exec/configure/if-eth-base /exec/configure/if-ethernet-all

ttl-security hops

ttl-security hops <ebgp-ttl> | { no | default } ttl-security hops [ <ebgp-ttl> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

ttl-security

Enable TTL Security Mechanism

hops

Specify hop count for remote peer

ebgp-ttl

EBGP hop count value

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

tunnel destination

tunnel destination { { <ip-addr> | <ip-prefix> | { <ip-addr> <ip-mask> } } | <ipv6-addr> } | no tunnel destination [ <ip-addr> | <ip-prefix> | { <ip-addr> <ip-mask> } | <ipv6-addr> ]

Syntax Description

no

Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

destination

destination of tunnel packets

ip-addr

IPv4 address (A.B.C.D)

ip-prefix

IPv4 mask (A.B.C.D/LEN)

ip-mask

IPv4 mask A.B.C.D

Command Mode

- /exec/configure/if-gre-tunnel

tunnel mode

tunnel mode { { gre [ ip | ipv6 ] } | { ipip [ ip | ipv6 ] } | { ipip decapsulate-any [ ip | ipv6 ] } | { ipv6ip [ decapsulate-any ] } | { ipv6ipv6 [ decapsulate-any ] } } | no tunnel mode

Syntax Description

no

Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

mode

tunnel encapsulation method

gre

generic route encapsulation protocol

ipip

IP in IP protocol

decapsulate-any

decapsulate any

ip

(Optional) over IP

ipv6

(Optional) over IPv6

ipv6ip

IPv6 in IPv4 protocol

ipv6ipv6

IPv6 in IPv6 protocol

Command Mode

- /exec/configure/if-any-tunnel

tunnel path-mtu-discovery

[no] tunnel path-mtu-discovery

Syntax Description

no

(Optional) Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

path-mtu-discovery

Enable Path MTU Discovery on tunnel

Command Mode

- /exec/configure/if-any-tunnel

tunnel path-mtu-discovery age-timer

tunnel path-mtu-discovery age-timer { <age-time> | infinite } | no tunnel path-mtu-discovery age-timer [ { <age-time> | infinite } ]

Syntax Description

no

Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

path-mtu-discovery

Enable Path MTU Discovery on tunnel

age-timer

Set PMTUD aging timer

age-time

Aging time

infinite

Disable pathmtu aging timer

Command Mode

- /exec/configure/if-any-tunnel

tunnel path-mtu-discovery min-mtu

tunnel path-mtu-discovery min-mtu <mtu> | no tunnel path-mtu-discovery min-mtu [ <mtu> ]

Syntax Description

no

Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

path-mtu-discovery

Enable Path MTU Discovery on tunnel

min-mtu

Min pmtud mtu allowed

mtu

Bytes

Command Mode

- /exec/configure/if-any-tunnel

tunnel source

tunnel source { <intf> | <ip-prefix> | { <ip-addr> [ <ip-mask> ] } | <ipv6-addr> | direct } | no tunnel source [ <intf> | <ip-prefix> | { <ip-addr> [ <ip-mask> ] } | <ipv6-addr> | direct ]

Syntax Description

no

Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

source

source of tunnel packets

intf

interface

ip-addr

IPv4 address (A.B.C.D)

ip-prefix

IPv4 address (A.B.C.D/LEN)

ip-mask

(Optional) IPv4 mask A.B.C.D

direct

all directly connected IP

Command Mode

- /exec/configure/if-gre-tunnel

tunnel ttl

tunnel ttl <ttl_val> | no tunnel ttl [ <ttl_val> ]

Syntax Description

no

Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

ttl

set time to live

ttl_val

time to live value

Command Mode

- /exec/configure/if-any-tunnel

tunnel use-vrf

tunnel use-vrf { <vrf-name> | <vrf-known-name> } | no tunnel use-vrf [ { <vrf-name> | <vrf-known-name> } ]

Syntax Description

no

Negate a command or set its defaults

tunnel

protocol-over-protocol tunneling

use-vrf

set tunnel vrf membership

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec/configure/if-any-tunnel

type type

type <fextype> | type <swcardid> | no type

Syntax Description

no

Negate the command

type

FEX Card type

fextype

Fex Type

swcardid

Card type

Command Mode

- /exec/configure/fex

Chapter 22. U Commands

- udf

- udld aggressive

- udld aggressive

- udld aggressive

- udld aggressive

- udld continue-on-err

- udld disable

- udld disable

- udld enable

- udld enable

- udld message-time

- udld reset

- udp-echo

- udp-jitter

- undebug all

- undebug l2rib

- uniq

- unsuppress-map

- untagged cos

- update-rib-always

- update-source

- update-source

- update adjacency

- update ip route

- update ipv6 route

- update license

- urib debugs-dump-to-file

- use-compression gzip

- use-vrf

- use-vrf

- use-vrf

- use-vrf

- user-jid password

- user max-logins

- user max-logins

- username

- username

- username

- username

- username

- username keypair export dsa

- username keypair generate dsa

- username keypair import dsa

- username password

- username ssh-cert-dn dsa

- username sshkey

- userpassphrase

- userpassphrase min

- userprofile trustedCert CRLLookup user-switch-bind user-certdn-match user-pubkey-match attribute-name search-filter base-DN

udf

udf <udf_name> { packet-start | { header { outer | inner } { l3 | l4 } } } <offset> <length> | no udf <udf_name> [ { packet-start | { header { outer | inner } { l3 | l4 } } } <offset> <length> ]

Syntax Description

no

Negate the command

udf

Define the User Defined Field (UDF)

udf_name

Name of the UDF to configure

packet-start

Offset base from packet-start

header

Offset base configuration

outer

Offset base: from outer header

inner

Offset base: from inner header

l3

Offset base: from l3 header

l4

Offset base: from l4 header

offset

Enter Offset in bytes for UDF (from offset base)

length

Enter Length in bytes for UDF (from offset)

Command Mode

- /exec/configure

udld aggressive

udld aggressive

Syntax Description

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode for interface(s)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld aggressive

udld aggressive

Syntax Description

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode on all fiber optic ports

Command Mode

- /exec/configure

udld aggressive

[no] udld aggressive

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode on all fiber optic ports

Command Mode

- /exec/configure

udld aggressive

[no] udld aggressive

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode for interface(s)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld continue-on-err

[no] udld continue-on-err

Syntax Description

no

(Optional) Negate a command or set its defaults

udld

UDLD protocol

continue-on-err

Force UDLD continue without disabling the port

Command Mode

- /exec

udld disable

[no] udld disable

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

disable

Disable UDLD for fiber interface(s)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld disable

udld disable

Syntax Description

udld

UDLD protocol

disable

Disable UDLD for fiber interface(s)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld enable

[no] udld enable

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

enable

Enable UDLD for non-fiber interface(s)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld enable

udld enable

Syntax Description

udld

UDLD protocol

enable

Enable UDLD for non-fiber interface(s)

Command Mode

- /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld message-time

udld message-time <i0> | no udld message-time

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

message-time

Setting the time in seconds between UDLD probe messages

i0

Enter the message timer value [default = 15]

Command Mode

- /exec/configure

udld reset

udld reset

Syntax Description

udld

UDLD protocol

reset

Reset all ports shut down by UDLD

Command Mode

- /exec/configure

udp-echo

[no] udp-echo { <hostname> | <ip-address> } <port> { [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <source-port-number> ] } +

Syntax Description

no

(Optional)

control

(Optional) enable

source-ip-address

(Optional) <source-port-number>

udp-echo

UDP Echo Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

port

Port Number (Recommended port range between 1025-65534)

enable

(Optional) Enable control packets exchange (default)

disable

(Optional) Disable control packets exchange

source-ip

(Optional) Source address

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-port

(Optional) Source Port

source-port-number

(Optional) Port Number (Recommended port range between 1025-65534)

Command Mode

- /exec/configure/ip-sla

udp-jitter

[no] udp-jitter { <hostname> | <ip-address> } <dest-port> { { [ codec { g711alaw | g711ulaw | g729a } { [ advantage-factor <advantage-num> ] [ codec-interval <codec-int> ] [ codec-numpackets <codec-numpack> ] [ codec-size <codec-bytes> ] } + ] [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] } + | { [ interval <packet-interval> ] [ num-packets <num-packets> ] [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] } + }

Syntax Description

no

(Optional)

codec

(Optional) g711alaw

codec-numpackets

(Optional) codec-size

source-port

(Optional) interval

codec-numpack

(Optional) <codec-bytes>

source-ip-hostname

(Optional) <source-ip-address>

udp-jitter

UDP Jitter Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

dest-port

Port Number (Recommended port range between 1025-65534)

g711alaw

(Optional) G.711 A Law 64000 bps

g711ulaw

(Optional) G.711 U Law 64000 bps

g729a

(Optional) G.729 8000 bps

advantage-factor

(Optional) Advantage Factor

codec-interval

(Optional) Inter Packet Interval

codec-size

(Optional) Number of bytes in payload

advantage-num

(Optional) Advantage Factor

codec-int

(Optional) Delay

codec-bytes

(Optional) Number of bytes in payload

packet-interval

(Optional) Delay (default 20)

num-packets

(Optional) Number of Packets (default 10)

interval

(Optional) Inter Packet Interval

num-packets

(Optional) Number of Packets to be transmitted

control

(Optional) Enable or disable control packets

enable

(Optional) Enable control packets exchange (default)

disable

(Optional) Disable control packets exchange

source-ip

(Optional) Source address

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

source-port

(Optional) Source Port

src-port

(Optional) Port Number (Recommended port range between 1025-65534)

Command Mode

- /exec/configure/ip-sla

undebug all

undebug all

Syntax Description

undebug

Disable Debugging functions (See also debug)

all

Disable all debugging

Command Mode

- /exec

undebug l2rib

undebug l2rib

Syntax Description

undebug

Disable Debugging functions (See also debug)

l2rib

L2RIB debug commands

Command Mode

- /exec

uniq

| uniq [ -c | -d | -f <nb-of-fields> | -s <nb-of-chars> | -u | -w <nb-chars-to-compare> | -i ] +

Syntax Description

|

Pipe command output to filter

uniq

Discard all but one of successive identical lines

-c

(Optional) prefix lines by the number of occurrences

-d

(Optional) only print duplicate lines

-f

(Optional) avoid comparing the first N fields

-s

(Optional) avoid comparing the first N characters

-u

(Optional) only print unique lines

-w

(Optional) compare no more than N characters in lines

-i

(Optional) ignore differences in case when comparing

nb-of-fields

(Optional) number of initial fields to ignore

nb-of-chars

(Optional) number of initial chars to ignore

nb-chars-to-compare

(Optional) max number of chars to compare

Command Mode

- /output

unsuppress-map

unsuppress-map <unsupp-rmap-name> | { no | default } unsuppress-map [ <unsupp-rmap-name> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

unsuppress-map

Route-map to selectively unsuppress suppressed routes

unsupp-rmap-name

Route-map name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

untagged cos

untagged cos <ucos-value> | no untagged cos

Syntax Description

no

Negate a command or set its defaults

untagged

default to use for untagged packets on interface

cos

IEEE 802.1Q class of service for QoS classification

ucos-value

COS value

Command Mode

- /exec/configure/if-set-qos

update-rib-always

[no] update-rib-always

Syntax Description

no

(Optional) Negate a command or set its defaults

update-rib-always

Force updates to rib

Command Mode

- /exec/configure/otv-isis

update-source

update-source <interface> | no update-source

Syntax Description

no

Negate a command or set its defaults

update-source

Specify source of BMP session and messages

interface

Interface name

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

update-source

update-source <interface> | { no | default } update-source [ <interface> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

update-source

Specify source of BGP session and updates

interface

Interface name

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor-sess

update adjacency

update adjacency <all>

Syntax Description

update

Update

adjacency

Display adjacency table

all

Update all adjcencies

Command Mode

- /exec

update ip route

update ip { route | rnh } [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

update

Update

ip

IPv4

route

Update routing information

rnh

Update only RNH information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Update all routes

Command Mode

- /exec

update ipv6 route

update ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

update

Update

ipv6

IPv6

route

Update routing information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Update all routes

Command Mode

- /exec

update license

update license <uri0> { <license-file> [ force ] | <s0> }

Syntax Description

update

Update license

license

Update a license file

uri0

Specify URL for the new license file

license-file

License file to be updated

force

(Optional) Force update license (don't prompt)

s0

License file to be updated

Command Mode

- /exec

urib debugs-dump-to-file

urib debugs-dump-to-file

Syntax Description

urib

Unicast Routing Information Base

debugs-dump-to-file

Dump all urib debugs to a file

Command Mode

- /exec

use-compression gzip

use-compression { gzip } | no use-compression

Syntax Description

no

Negate a command or set its defaults

use-compression

Specify the destination compression method

gzip

GZIP compression algorithm

Command Mode

- /exec/configure/telemetry/destination-profile

use-vrf

use-vrf { default | <vrf-cfg-name> } | no use-vrf

Syntax Description

no

Negate a command or set its defaults

use-vrf

Specify the destination vrf

default

Known VRF name

vrf-cfg-name

Configurable VRF name

Command Mode

- /exec/configure/telemetry/destination-profile

use-vrf

[no] use-vrf { <vrf-name> | <vrf-known-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

use-vrf

Display per-VRF information

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec/configure/ldap

use-vrf

[no] use-vrf { management | default | <vrf_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

use-vrf

vrf to be used to contact servers in this group

management

management vrf

default

default vrf

vrf_name

name of the vrf

Command Mode

- /exec/configure/tacacs+

use-vrf

[no] use-vrf { management | default | <vrf_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

use-vrf

vrf to be used to contact servers in this group

management

management vrf

default

default vrf

vrf_name

name of the vrf

Command Mode

- /exec/configure/radius

user-jid password

[no] user-jid <jid> password [ 0 <clear> | 7 <encrypted> | <password> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

user-jid

User Jabber ID

jid

Enter user Jabber ID

password

Password

0

(Optional) Password that follows should be in clear text

clear

(Optional) Password in clear text

7

(Optional) Password that follows should be in encrypted text

encrypted

(Optional) Encrypted password

password

(Optional) Enter password in clear text

Command Mode

- /exec/configure/fabric-db/server-xmpp

user max-logins

user max-logins <limit>

Syntax Description

user

Configure system-wide user settings

max-logins

maximum simultaneous logins

limit

login session maximum

Command Mode

- /exec/configure

user max-logins

[no] user max-logins [ <limit> ]

Syntax Description

no

Negate a command or set its defaults

user

Configure system-wide user settings

max-logins

maximum simultaneous logins

limit

(Optional) login session maximum

Command Mode

- /exec/configure

username

{ username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] [ role <s6> ] } | { username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ role <s6> ] [ expire <s5> [ past ] ] } | { username <s0> [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ role <s6> ] } | { username <s0> [ expire <s5> [ past ] ] [ role <s6> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { username <s0> [ role <s6> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] } | { username <s0> [ role <s6> ] [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { no username <s7> [ role <s8> ] }

Syntax Description

no

Negate a command or set its defaults

username

Configure user information.

s0

user name

password

(Optional) Password for the user

0

(Optional) Indicates that the password that follows should be in clear text

s2

(Optional) Password for the user (clear text)

5

(Optional) Indicates that the password that follows should be encrypted

s3

(Optional) strongly encrypted password

s4

(Optional) Password for the user (clear text)

expire

(Optional) Expiry date for this user account(in YYYY-MM-DD format)

s5

(Optional) Expiry in YYYY-MM-DD format

past

(Optional) Expiry date is in past

role

(Optional) role which the user is to be assigned to

s6

(Optional) role name

s7

user name

s8

(Optional) role name

Command Mode

- /exec/configure

username

{ username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] [ priv-lvl <p> ] } | { username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ priv-lvl <p> ] [ expire <s5> [ past ] ] } | { username <s0> [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ priv-lvl <p> ] } | { username <s0> [ expire <s5> [ past ] ] [ priv-lvl <p> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { username <s0> [ priv-lvl <p> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] } | { username <s0> [ priv-lvl <p> ] [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { no username <s7> [ priv-lvl <p> ] }

Syntax Description

no

Negate a command or set its defaults

username

Configure user information.

s0

user name

password

(Optional) Password for the user

0

(Optional) Indicates that the password that follows should be in clear text

s2

(Optional) Password for the user (clear text)

5

(Optional) Indicates that the password that follows should be encrypted

s3

(Optional) strongly encrypted password

s4

(Optional) Password for the user (clear text)

expire

(Optional) Expiry date for this user account(in YYYY-MM-DD format)

s5

(Optional) Expiry in YYYY-MM-DD format

past

(Optional) Expiry date is in past

s7

user name

priv-lvl

(Optional) privilege level which the user is to be assigned to

p

(Optional) privilege level

Command Mode

- /exec/configure

username

{ [ no ] username <name> }

Syntax Description

username

user name

name

user name

Command Mode

- /exec/configure/dot1x-cred

username

{ username <s0> { shelltype { vsh | bash } } }

Syntax Description

username

Configure user information.

s0

user name

shelltype

Choose shell type for login

vsh

use vsh shell

bash

use bash shell

Command Mode

- /exec/configure

username

[no] username <s0> { sshkey2 { file <uri0> | <line> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

username

Configure user information.

s0

user name

sshkey2

Update ssh key for the user for ssh authentication

file

ssh key file

uri0

file containing host public key for the user

line

ssh key for the user

Command Mode

- /exec/configure

username keypair export dsa

{ username <s0> keypair export <s1> { dsa | rsa } [ force ] }

Syntax Description

username

Configure user information.

keypair

Use existing ssh keypair

export

Export keypair to Bootflash/Remote directory

force

(Optional) Force the export of keys even if the destination files are present

dsa

Use DSA Keys

rsa

Use RSA Keys

s0

user name

s1

Enter filename to export to

Command Mode

- /exec/configure

username keypair generate dsa

{ username <s0> keypair generate { dsa [ force ] | rsa [ <i0> | <oldrange> ] [ force ] } | no username <s0> keypair generate [ { dsa [ force ] | rsa [ <i0> | <oldrange> ] [ force ] } ] }

Syntax Description

no

Negate a command or set its defaults

username

Configure user information.

s0

user name

generate

Generate ssh key pairs

keypair

Generate SSH User Keys

dsa

Generate DSA keys

force

(Optional) Force the generation of keys even if previous ones are present

rsa

Generate RSA keys

i0

(Optional) Enter number of bits (in multiples of 8)

oldrange

(Optional) Enter number of bits

Command Mode

- /exec/configure

username keypair import dsa

{ username <s0> keypair import <s1> { dsa | rsa } [ force ] }

Syntax Description

username

Configure user information.

keypair

Use existing ssh keypair

import

Import keypair from Bootflash/Remote directory

force

(Optional) Force the generation of keys even if previous ones are present

dsa

Use DSA Keys

rsa

Use RSA Keys

s0

user name

s1

Enter filename to import

Command Mode

- /exec/configure

username password

[no] username <user> password { 0 <pass1> | 5 <pass2> | <pass3> }

Syntax Description

no

(Optional) Negate a command or set its defaults

username

Configure user name

user

Username

password

Password for user

0

Indicates that the password that follows should be in clear text

pass1

Password for the user (clear text)

5

Indicates that the password that follows should be encrypted

pass2

strongly encrypted password

pass3

Password for the user (clear text)

Command Mode

- /exec/configure/vmt-conn

username ssh-cert-dn dsa

[no] username <s1> ssh-cert-dn <s2> { dsa | rsa }

Syntax Description

no

(Optional) Negate a command or set its defaults

username

Configure user information.

s1

user name

ssh-cert-dn

Update cert dn

s2

distinguished name to be used

dsa

Use dsa algorithm

rsa

Use rsa algorithm

Command Mode

- /exec/configure

username sshkey

{ username <s0> sshkey { file <uri0> | <line> } | no username <s0> sshkey }

Syntax Description

username

Configure user information.

s0

user name

sshkey

Update ssh key for the user for ssh authentication

file

ssh key file

uri0

file containing host public key for the user

line

ssh key for the user

no

Negate a command or set its defaults

Command Mode

- /exec/configure

userpassphrase

[no] userpassphrase { min-length | max-length | length }

Syntax Description

no

Negate a command or set its defaults

userpassphrase

user passphrase

min-length

passphrase minimum length

max-length

passphrase maximum length

length

passphrase min and max length

Command Mode

- /exec/configure

userpassphrase min

userpassphrase { min-length <min-len> | max-length <max-len> } +

Syntax Description

userpassphrase

user passphrase

min-length

passphrase minimum length

max-length

passphrase maximum length

min-len

minimum length of passphrase

max-len

maximum length of passphrase

Command Mode

- /exec/configure

userprofile trustedCert CRLLookup user-switch-bind user-certdn-match user-pubkey-match attribute-name search-filter base-DN

{ userprofile | trustedCert | CRLLookup | user-switch-bind | user-certdn-match | user-pubkey-match } attribute-name <s0> search-filter <s1> base-DN <s2>

Syntax Description

userprofile

Set the userprofile

trustedCert

Set the trustedCert

CRLLookup

Set the CRLLookup

user-switch-bind

Set the user-switch-bind

user-certdn-match

Set the certificate matching

user-pubkey-match

Set the pubkey matching

attribute-name

LDAP attribute-name

s0

Search Map attribute-name

search-filter

LDAP search-filter

s1

Search Map search-filter

base-DN

LDAP base-DN

s2

Search Map base-DN Name

Command Mode

- /exec/configure/ldap/search

Chapter 23. V Commands

- validate-xml

- validate-xml

- variance

- vdc-mig

- vdc

- vdc

- vdc combined-hostname

- vdc_id

- vdc resource template

- vdc suspend

- vdc suspend

- vdp dot1q default static

- vdp dot1q static

- vdp vni default static

- vdp vni static

- vendor controller interop

- verify-data

- verify

- verify profile

- verify verbose

- version

- version 5

- version 9

- virtual-service

- virtual-service

- virtual-service

- virtual-service connect name console

- virtual-service move name log to

- virtual-service reset force

- virtual IPv6

- virtual IPv6

- virtual ip

- virtual ip

- vlan-consistency-check

- vlan-pruning enable

- vlan

- vlan2

- vlan access-map

- vlan configuration

- vlan designated priority

- vlan filter vlan

- vlan root priority

- vmtracker connection

- vmtracker connection refresh

- vmtracker enable

- vmtracker fabric auto-config

- vmtracker set device-id

- vn-segment

- vni

- vni default dynamic

- vni l2

- vpc

- vpc domain

- vpc orphan-port suspend

- vpc peer-link

- vpc suspend

- vpc upgrade-done

- vpn

- vpn id

- vrf

- vrf

- vrf

- vrf

- vrf

- vrf

- vrf

- vrf

- vrf

- vrf

- vrf

- vrf context

- vrf default static

- vrf member

- vrf member

- vrf static

- vrrp

- vrrp bfd

- vrrpv2

- vrrpv3

- vrrpv3 address-family

- vrrpv3 address-family

- vrrs leader

- vrrs pathway

- vsh

- vtp

- vtp domain

- vtp file

- vtp mode

- vtp password

- vtp pruning

- vtp version

validate-xml

| validate-xml

Syntax Description

|

Pipe command output to filter

validate-xml

validate an xml output according to .xsd definitions

Command Mode

- /output

validate-xml

| validate-xml

Syntax Description

|

Pipe command output to filter

validate-xml

validate an xml output according to .xsd definitions

Command Mode

- /output

variance

{ { variance <variance> } | { no variance [ <variance> ] } }

Syntax Description

no

Negate a command or set its defaults

variance

Control load balancing variance

variance

Metric variance multiplier

Command Mode

- /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

vdc-mig

vdc-mig [ ip-query | ovl-state ]

Syntax Description

vdc-mig

Send VDC migration message to ISIS

ip-query

(Optional) Send IP query message to ISIS

ovl-state

(Optional) Send overload query message to ISIS

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

vdc

[no] vdc <e-vdc> [ force ]

Syntax Description

no

Negate a command or set its defaults

vdc

Manage Virtual Device Context

e-vdc

Enter Virtual Device Context <vdc-id>

force

(Optional) Force ungraceful cleanup

Command Mode

- /exec/configure

vdc

vdc <e-vdc> [ id <new_id> ] [ type <vtype> ]

Syntax Description

vdc

Manage Virtual Device Context

e-vdc

Enter Virtual Device Context <vdc-id>

id

(Optional) force this vdc into a specific id

new_id

(Optional) force this vdc into a specific id

type

(Optional) Create vdc with a special set of services

vtype

(Optional) type of vdc

Command Mode

- /exec/configure

vdc combined-hostname

[no] vdc combined-hostname

Syntax Description

no

(Optional) Negate a command or set its defaults

vdc

Manage Virtual Device Context

combined-hostname

The hostname of non-default vdcs will be <default vdc name>-<nondefault vdc name>

Command Mode

- /exec/configure

vdc_id

[no] vdc_id <id>

Syntax Description

no

Negate a command or set its defaults

vdc_id

Manage Virtual Device Context

id

Enter Virtual Device Context <vdc-id>

Command Mode

- /exec/configure

vdc resource template

[no] vdc resource template { <name> | <res-mgr-template-known-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

vdc

Manage Virtual Device Context

resource

Configure resource template

template

Configure resource template

name

Resource template name

res-mgr-template-known-name

Resource template name

Command Mode

- /exec/configure

vdc suspend

vdc <en-vdc> suspend

Syntax Description

vdc

Manage Virtual Device Context

en-vdc

Enter Virtual Device Context <vdc-id>

suspend

Put the vdc in a paused state. When resumed vdc will come up with its startup config

Command Mode

- /exec/configure

vdc suspend

[no] vdc <en-vdc> suspend

Syntax Description

vdc

Manage Virtual Device Context

en-vdc

Enter Virtual Device Context <vdc-id>

suspend

Put the vdc in a paused stated. When resumed vdc will use its startup config

Command Mode

- /exec/configure

vdp dot1q default static

{ vdp dot1q default { static <profile-name> | dynamic } } | { no vdp dot1q default }

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

default

Default (wildcard). Match any dot1q when there is no specific dot1q mapping configured

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

vdp dot1q static

{ vdp dot1q <vlan-id> { static <profile-name> | dynamic } } | { no vdp dot1q <vlan-id> }

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

vlan-id

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

vdp vni default static

{ vdp vni default { static <profile-name> | dynamic } } | { no vdp vni default }

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

vni

Virtual Network Identifier

static

Static Profile Map: Configure profile name via CLI

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

profile-name

default

Default (wildcard). Match any vni when there is no specific vni mapping configured

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

vdp vni static

{ vdp vni <vni-id> { static <profile-name> | dynamic } } | { no vdp vni <vni-id> }

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

vni

Virtual Network Identifier

vni-id

static

Static Profile Map: Configure profile name via CLI

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

profile-name

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

vendor controller interop

[no] vendor controller interop

Syntax Description

no

(Optional) Negate a command or set its defaults

vendor

vendor

controller

controller

interop

interop

Command Mode

- /exec/configure

verify-data

{ { no | default } verify-data | verify-data }

Syntax Description

no

default

Set a command to its defaults

verify-data

Verify data

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/icmpEcho

verify

verify

Syntax Description

verify

Verify the current configuration session

Command Mode

- /exec/configure

verify profile

verify profile <all_conf_profile_name> [ __readonly__ TABLE_profile_name <missing_param> ]

Syntax Description

verify

Verify the instance with a configuration profile

profile

Name of the configuration profile

all_conf_profile_name

Enter the name of configuration profile

__readonly__

(Optional)

TABLE_profile_name

(Optional)

missing_param

(Optional)

Command Mode

- /exec/configure/param-inst

verify verbose

verify verbose

Syntax Description

verify

Verify the current configuration session

verbose

Verify the current configuration session with more details

Command Mode

- /exec/configure

version

[no] version <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

version

Version info

s0

Version

Command Mode

- /exec/configure

version 5

[no] version 5

Syntax Description

version

Specify the export version

5

Version 5 Export

Command Mode

- /exec/configure/nfm-exporter

version 9

[no] version 9

Syntax Description

version

Specify the export version

9

Version 9 Export

Command Mode

- /exec/configure/nfm-exporter

virtual-service

virtual-service { { install name <virt_serv_name> package <file_uri> [ media <target_media> ] } | { upgrade name <virt_serv_name> package <file_uri> } | { uninstall name <virt_serv_name> } }

Syntax Description

virtual-service

Virtualization manager actions

install

Add a virtual service to install database

upgrade

Upgrade a virtual service package to a different version

name

Name of the virtual service

virt_serv_name

Virtual service name

package

Package location

file_uri

File name (with .ova extension) for the virtual service

media

(Optional) Target media to use to explode the virtual service package

target_media

(Optional) Target media

uninstall

Remove a virtual service from the install database

Command Mode

- /exec

virtual-service

[no] virtual-service

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual-service

Virtual service global settings

Command Mode

- /exec/configure

virtual-service

[no] virtual-service <virt_serv_name>

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual-service

Configure a virtual service

virt_serv_name

Virtual service name

Command Mode

- /exec/configure

virtual-service connect name console

virtual-service connect name <virt_serv_name> { console | aux }

Syntax Description

virtual-service

Virtualization service actions

connect

Request a virtual service shell

name

Name of the virtual service

virt_serv_name

Name of existing virtual service

console

Request a virtual service console shell

aux

Request a virtual service auxiliary console shell

Command Mode

- /exec

virtual-service move name log to

virtual-service move name <virt_serv_name> { log | core } to <dir_uri>

Syntax Description

virtual-service

Virtualization service actions

move

Move a virtual service log or core files

name

Name of the virtual service

virt_serv_name

Name of existing virtual service

log

Move log files

core

Move core files

to

Destination directory to move log or core files to

dir_uri

Destination directory name

Command Mode

- /exec

virtual-service reset force

virtual-service reset force

Syntax Description

virtual-service

Virtualization service actions

reset

Virtualization reset commands

force

Force a non-recoverable reset of all virtualization files

Command Mode

- /exec

virtual IPv6

[no] virtual IPv6 { <ip-addr> { <prefix> | <netmask> } } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ] [ device-group <dgrp_name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

IPv6

ITD virtual IPv6

prefix

IPV6 prefix length

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

device-group

(Optional) device-group

dgrp_name

(Optional) VIP device-group name

Command Mode

- /exec/configure/itd

virtual IPv6

[no] virtual IPv6 { <ip-addr> { <prefix> | <netmask> } } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

IPv6

ITD virtual IPv6

prefix

IPV6 prefix length

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

Command Mode

- /exec/configure/itd

virtual ip

[no] virtual ip { <ip-addr> <ip-mask> } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ] [ device-group <dgrp_name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

ip

ITD virtual ip

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

device-group

(Optional) device-group

dgrp_name

(Optional) VIP device-group name

Command Mode

- /exec/configure/itd

virtual ip

[no] virtual ip { <ip-addr> <ip-mask> } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

ip

ITD virtual ip

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

Command Mode

- /exec/configure/itd

vlan-consistency-check

[no] vlan-consistency-check

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan-consistency-check

Enable vlan consistency check

Command Mode

- /exec/configure/evpn-esi-mh

vlan-pruning enable

vlan-pruning enable | no vlan-pruning enable

Syntax Description

no

Negate a command or set its defaults

vlan-pruning

Configure Vlan-pruning feature

enable

Set the mode for vlan-pruning

Command Mode

- /exec/configure/l2mp-isis/l2mp-isis-vrf-common

vlan

vlan <vlans> | no vlan

Syntax Description

no

Negate a command or set its defaults

vlan

Set allowed fabricpath VLANs for a given anycast bundle

vlans

VLAN IDs of the allowed fabricpath VLANs in the anycast bundle

Command Mode

- /exec/configure/anycast

vlan2

[no] vlan2 <vlan-id-create-delete>

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan2

Vlan commands

vlan-id-create-delete

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

vlan access-map

[no] vlan access-map <name> [ <seqno> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan

Vlan commands

name

List name

access-map

Configure a VLAN access map

seqno

(Optional) Sequence number

Command Mode

- /exec/configure

vlan configuration

[no] vlan configuration <vlan-id-create-delete>

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan

Vlan commands

configuration

vlan feature configuration mode

vlan-id-create-delete

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec/configure

vlan designated priority

{ vlan <vlan-id> | bridge-domain <bd-id> } designated priority <prio> | no { vlan <vlan-id> | bridge-domain <bd-id> } designated priority [ <prio> ]

Syntax Description

no

Negate a command or set its defaults

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

designated

Set the designated bridge priority for the spanning tree

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096

Command Mode

- /exec/configure/spanning-tree/pseudo

vlan filter vlan

[no] vlan filter <name> { vlan-list <vlans> | vlan-list-include-reserved <vlans-include-reserved> }

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan

Vlan commands

filter

Specify access control for packets

name

List name

vlan-list

Specify list of VLANs to apply access control

vlans

List of VLANs

vlan-list-include-reserved

Specify list of VLANs to apply access control

vlans-include-reserved

List of VLANs

Command Mode

- /exec/configure

vlan root priority

{ vlan <vlan-id> | bridge-domain <bd-id> } root priority <prio> | no { vlan <vlan-id> | bridge-domain <bd-id> } root priority [ <prio> ]

Syntax Description

no

Negate a command or set its defaults

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

root

Set the root bridge priority for the spanning tree

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096

Command Mode

- /exec/configure/spanning-tree/pseudo

vmtracker connection

[no] vmtracker connection <connection-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

connection

Specify a host to connect

connection-name

VM host name

Command Mode

- /exec/configure

vmtracker connection refresh

[no] vmtracker connection <connection-name> refresh

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

connection

Specify a host to connect

connection-name

VM host name

refresh

Refresh all host related information

Command Mode

- /exec/configure

vmtracker enable

[no] vmtracker enable

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker feature

enable

Enable vmtracker feature on interface

Command Mode

- /exec/configure/if-switching

vmtracker fabric auto-config

[no] vmtracker fabric auto-config

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

fabric

Enable VM Tracker Fabric paramters

auto-config

Enable VM Tracker Fabric AutoConfiguration

Command Mode

- /exec/configure

vmtracker set device-id

[no] vmtracker set device-id <dev-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

set

Set vmtracker options

device-id

Set the device-id

dev-id

Device id

Command Mode

- /exec/configure

vn-segment

vn-segment { <segment-id> | <zero-segment-id> } | no vn-segment

Syntax Description

no

Negate a command or set its defaults

vn-segment

VN Segment id of the VLAN

segment-id

segment-id

zero-segment-id

segment-id

Command Mode

- /exec/configure/vlan

vni

{ vni <id> } | { no vni [ <id> ] }

Syntax Description

no

Negate a command or set its defaults

vni

Virtual Network Identifier

id

vni, Example: 4096,6099

Command Mode

- /exec/configure/vrf

vni default dynamic

{ vni default dynamic } | { no vni default }

Syntax Description

no

Negate a command or set its defaults

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

vni

Virtual Network Identifier

default

Default (wildcard). Match any vni when there is no specific vni mapping configured

Command Mode

- /exec/configure/profile-map /exec/configure/profile-map-global

vni l2

[no] vni <vni_id> l2

Syntax Description

no

(Optional) Negate a command or set its defaults

vni

Configure Ethernet VPN ID

vni_id

Specify VNI ID

l2

Layer-2 VNI

Command Mode

- /exec/configure/evpn

vpc

vpc [ <vpc_num> ] | no vpc [ <vpc_num> ]

Syntax Description

no

Negate a command or set its defaults

vpc

Virtual Port Channel configuration

vpc_num

(Optional) specify a Virtual Port Channel number

Command Mode

- /exec/configure/if-eth-port-channel-switch

vpc domain

vpc domain <domain_id> | no vpc domain <domain_id>

Syntax Description

no

Negate a command or set its defaults

vpc

Virtual Port Channel configuration

domain

Specify domain

domain_id

domain id

Command Mode

- /exec/configure

vpc orphan-port suspend

[no] vpc orphan-port suspend

Syntax Description

no

(Optional) Negate a command or set its defaults

vpc

Virtual Port Channel configuration

orphan-port

orphan-port (non-vpc port)

suspend

suspend - when vPC secondary peerlink goes down

Command Mode

- /exec/configure/if-eth-phy /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel

vpc peer-link

vpc peer-link | no vpc peer-link

Syntax Description

no

Negate a command or set its defaults

vpc

Virtual Port Channel configuration

peer-link

specify if this link is used for peer communication

Command Mode

- /exec/configure/if-eth-port-channel-switch

vpc suspend

vpc suspend [ <n-secs> ]

Syntax Description

vpc

Virtual Port Channel configuration

suspend

Suspend the vPC on primary

n-secs

(Optional) Suspension duration in seconds

Command Mode

- /exec/configure/vpc-domain

vpc upgrade-done

vpc upgrade-done

Syntax Description

vpc

Virtual Port Channel configuration

upgrade-done

Unlock the cli and remove ISSU state

Command Mode

- /exec

vpn

[no] vpn <otv-isis-vpn-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vpn

Configure IS-IS VPN name eg: Overlay<x>

otv-isis-vpn-name

Overlay name

Command Mode

- /exec/configure/otv-isis

vpn id

vpn id <vpn-id> | no vpn id [ <vpn-id> ]

Syntax Description

no

Negate a command or set its defaults

vpn

Configure VPN ID in rfc2685 format

id

Configure VPN ID in rfc2685 format

vpn-id

OUI:VPN-Index, format (hex) <3 bytes OUI:4 bytes VPN-Index>

Command Mode

- /exec/configure/vrf

vrf

[no] vrf <vrf-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Configure ISIS VRF information

vrf-name

VRF name

Command Mode

- /exec/configure/router-isis

vrf

[no] vrf <vrf-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Configure RIP VRF information

vrf-name

VRF name

Command Mode

- /exec/configure/router-rip

vrf

[no] vrf <vrf-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Display per-VRF information

vrf-name

VRF name

Command Mode

- /exec/configure/router-ospf

vrf

{ vrf <name> } | { no vrf <name> }

Syntax Description

no

Negate a command or set its defaults

vrf

ITD service vrf

name

ITD Service VRF name

Command Mode

- /exec/configure/itd

vrf

{ vrf <name> } | { no vrf <name> }

Syntax Description

no

Negate a command or set its defaults

vrf

ITD service vrf

name

ITD Service VRF name

Command Mode

- /exec/configure/itd

vrf

{ { no | default } vrf |

Syntax Description

no

default

Set a command to its defaults

vrf

Configure IP SLAs for a VPN Routing/Forwarding instance

Command Mode

- /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/http

vrf

[no] vrf <vrf-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Display per-VRF information

vrf-name

VRF name

Command Mode

- /exec/configure/router-ospf3

vrf

[no] vrf <vrf-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Configure VRF information

vrf-name

VRF name

Command Mode

- /exec/configure/router-eigrp

vrf

[no] vrf <vrf-cfg-name>

Syntax Description

vrf-cfg-name

VRF name

vrf

Virtual Router Context

no

(Optional) Negate a command or set its defaults

Command Mode

- /exec/configure/router-bgp/router-bgp-bmp-server

vrf

[no] vrf <vrf-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Virtual Router Context

vrf-name

VRF name

Command Mode

- /exec/configure/router-bgp

vrf

[no] vrf { <vrf-name> | <vrf-known-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

set vrf membership

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec/configure/config-monitor-erspan-src

vrf context

vrf context <vrf-name> | no vrf context { <vrf-name> | <vrf-name> }

Syntax Description

no

Negate a command or set its defaults

vrf

Configure VRF parameters

context

Create VRF and enter VRF mode

vrf-name

VRF name

vrf-name

VRF name

vrf-name

VRF name

Command Mode

- /exec/configure

vrf default static

{ vrf default { static <profile-name> | dynamic } } | { no vrf default }

Syntax Description

no

Negate a command or set its defaults

vrf

VRF name

default

Default (wildcard). Match any vrf when there is no specific vrf mapping configured

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

Command Mode

- /exec/configure/profile-map-global

vrf member

vrf member <vrf-name> | no vrf member [ <vrf-name> ]

Syntax Description

no

Negate a command or set its defaults

vrf

Configure VRF parameters

member

Set interface's VRF membership

vrf-name

VRF name

Command Mode

- /exec/configure/if-igp /exec/configure/if-mgmt-ether

vrf member

vrf member { <vrf_name> | <vrf-known-name> } | no vrf member [ <vrf_name> | <vrf-known-name> ]

Syntax Description

no

Negate a command or set its defaults

vrf

Configure VPN Routing/Forwarding table

member

Set route's VRF membership

vrf_name

VRF name

vrf-known-name

Known VRF name

Command Mode

- /exec/configure/track

vrf static

{ vrf <vrf-name> { static <profile-name> | dynamic } } | { no vrf <vrf-name> }

Syntax Description

no

Negate a command or set its defaults

vrf

VRF name

vrf-name

VRF name

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

Command Mode

- /exec/configure/profile-map-global

vrrp

[no] vrrp <vr_id>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrp

VRRP configuration commands

vr_id

IPv4 VR group number

Command Mode

- /exec/configure/if-legacy-eth /exec/configure/if-ethernet /exec/configure/if-port-channel /exec/configure/if-vlan-common /exec/configure/if-eth-any

vrrp bfd

{ vrrp bfd <peer_intf_ip> | no vrrp bfd [ <peer_intf_ip> ] }

Syntax Description

vrrp

VRRP configuration commands

bfd

BFD protocol

peer_intf_ip

Neighbor IP address

no

Negate a command or set its defaults

Command Mode

- /exec/configure/if-eth-any/vrrp

vrrpv2

[no] vrrpv2

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv2

Enable VRRPv2 compatibility mode

Command Mode

- /exec/configure/if-eth-any/vrrpv3

vrrpv3

[no] vrrpv3

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv3

VRRPv3 configuration commands

Command Mode

- /exec/configure

vrrpv3 address-family

[no] vrrpv3 <group_id> address-family <opt_v4>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv3

Configure VRRPv3 group parameters

address-family

IPV4 address family

opt_v4

Enter ipv4

group_id

VRRP Group ID

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan

vrrpv3 address-family

[no] vrrpv3 <group_id> address-family <opt_v6>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv3

Configure VRRPv3 group parameters

address-family

IPV6 address family

opt_v6

Enter ipv6

group_id

VRRP Group ID

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan

vrrs leader

[no] vrrs leader <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrs

VRRS-related commands

leader

Name of VRRS tag for which this group is the leader

tag

VRRS tag to lead

Command Mode

- /exec/configure/if-eth-any/vrrpv3

vrrs pathway

[no] vrrs pathway <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrs

VRRS Interface configuration commands

pathway

Configure a VRRS pathway

name

Name of the VRRS tag to associate with pathway

Command Mode

- /exec/configure/if-eth-any /exec/configure/if-vlan

vsh

| vsh

Syntax Description

|

Pipe command output to filter

vsh

the shell that understands cli command

Command Mode

- /output

vtp

[no] vtp

Syntax Description

no

(Optional) Negate a command or set its defaults

vtp

Enable VTP on this interface

Command Mode

- /exec/configure/if-switching

vtp domain

vtp domain <domain_name>

Syntax Description

vtp

Configure global VTP state

domain

Set the name of the VTP administrative domain

domain_name

The ascii name for the VTP administrative domain

Command Mode

- /exec/configure

vtp file

vtp file <file_name> | no vtp file

Syntax Description

no

Negate a command or set its defaults

vtp

Configure global VTP state

file

Set the name of the VTP file name

file_name

URI for vlan.dat

Command Mode

- /exec/configure

vtp mode

vtp mode <mode-name> | no vtp mode

Syntax Description

no

Negate a command or set its defaults

vtp

Configure global VTP state

mode

Configure VTP device mode

mode-name

Command Mode

- /exec/configure

vtp password

vtp password <password_name> | no vtp password

Syntax Description

no

Negate a command or set its defaults

vtp

Configure global VTP state

password

Set the password for the VTP administrative domain

password_name

The ascii password for the VTP administrative domain

Command Mode

- /exec/configure

vtp pruning

vtp pruning | no vtp pruning

Syntax Description

no

Negate a command or set its defaults

vtp

Configure global VTP state

pruning

Set the adminstrative domain to permit pruning

Command Mode

- /exec/configure

vtp version

vtp version <version_num> | no vtp version

Syntax Description

no

Negate a command or set its defaults

vtp

Configure global VTP state

version

Set the adminstrative domain to VTP version

version_num

Set the adminstrative domain to VTP version

Command Mode

- /exec/configure

Chapter 24. W Commands

- wait-igp-convergence

- watch

- wc

- weight

- weight

- weight

- weight

- weighting

- where

- where detail

- which

- wide-metric-only

- window-size

- wred-queue qos-group-map queue-only

- write erase

- write erase boot

- write erase debug

- wrr-queue qos-group-map

- wrr unicast-bandwidth

wait-igp-convergence

[no] wait-igp-convergence

Syntax Description

no

(Optional) Negate a command or set its defaults

wait-igp-convergence

Delay initial bestpath until redistributed IGPs have converged

Command Mode

- /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

watch

watch [ differences ] [ interval <time> ] <watch_cmd>

Syntax Description

watch

execute a program periodically

differences

(Optional) highlight the differences

interval

(Optional) watch interval

time

(Optional) interval in seconds

watch_cmd

enter the command you want to watch

Command Mode

- /exec

wc

| wc [ -c | -l | -w ]

Syntax Description

|

Pipe command output to filter

wc

Count words, lines, characters

-c

(Optional) Output character count

-l

(Optional) Output line count

-w

(Optional) Output word count

Command Mode

- /output

weight

[no] weight <weight-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

weight

weight for traffic distribution

weight-value

weight value

Command Mode

- /exec/configure/itd-dg-node

weight

[no] weight <weight-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

weight

weight for traffic distribution

weight-value

weight value

Command Mode

- /exec/configure/itd-dg-node

weight

{ weight <weight> } | { { no | default } weight [ <weight> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

weight

Set default weight for routes from this neighbor

weight

Default weight

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

weight

{ weight <weight> } | { { no | default } weight [ <weight> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

weight

Set default weight for routes from this neighbor

weight

Default weight

Command Mode

- /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

weighting

weighting { <weight-max-val> [ lower <low-thresh> [ upper <upper-thresh> ] | upper <upper-thresh> ] | track <track-obj> [ decrement <dec-val> ] } | no weighting [ { <weight-max-val> [ lower <low-thresh> [ upper <upper-thresh> ] | upper <upper-thresh> ] | track <track-obj> [ decrement <dec-val> ] } ]

Syntax Description

no

Negate a command or set its defaults

weighting

Gateway weighting and tracking

weight-max-val

Weighting maximum value

lower

(Optional) Weighting lower threshold

low-thresh

(Optional) Weighting lower threshold value

upper

(Optional) Weighting upper threshold

upper-thresh

(Optional) Weighting upper threshold value

track

Interface tracking

track-obj

Tracked object

decrement

(Optional) Weighting decrement

dec-val

(Optional) Decrement value 1 255

Command Mode

- /exec/configure/if-eth-any/glbp

where

where

Syntax Description

where

shows the cli context you are in

Command Mode

- /global

where detail

where detail

Syntax Description

where

shows the cli context you are in

detail

shows each entry on separate line

Command Mode

- /global

which

which

Syntax Description

which

shows which cli commands are available in current mode (see also 'show cli syntax' which has more options)

Command Mode

- /global

wide-metric-only

[no] wide-metric-only

Syntax Description

no

(Optional) Negate a command or set its defaults

wide-metric-only

Advertise only wide metric

Command Mode

- /exec/configure/router-isis/router-isis-vrf-common

window-size

[no] window-size <size>

Syntax Description

window-size

Configure Window size

size

window size value

Command Mode

- /exec/configure/macsec-policy

wred-queue qos-group-map queue-only

[no] wred-queue qos-group-map queue-only { <qid> }

Syntax Description

no

(Optional) Negate the command

wred-queue

Enable queue based ECN marking for specific qos-group

queue-only

Enable queue based ECN marking

qos-group-map

Qid value

qid

Provide qos-group value

Command Mode

- /exec/configure

write erase

write erase

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

Command Mode

- /exec

Usage Guidelines

You can erase the configuration on your device to return to the configuration defaults. In this context, configuration refers to the startup configuration as displayed by the show startup command. No other internal application or process states are cleared. To remove all application persistency files such as patch rpms, third party rpms, and application configuration in the /etc directory other than configuration, use the install reset command.

write erase boot

write erase boot

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

boot

Destroys boot configuration on persistent media

Command Mode

- /exec

write erase debug

write erase debug

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

debug

Destroys debug configuration on persistent media

Command Mode

- /exec

wrr-queue qos-group-map

[no] wrr-queue qos-group-map <qid> { <cos> } +

Syntax Description

no

(Optional) Negate the command

wrr-queue

Map traffic priority (QG) values to L3 Multicast Queues

qos-group-map

Qid value

qid

Provide qid value

cos

Provide qos-group-map value

Command Mode

- /exec/configure

wrr unicast-bandwidth

[no] wrr unicast-bandwidth <bw>

Syntax Description

no

(Optional) Negate the command

wrr

Configure Unicast Traffic Bandwidth Percentage

unicast-bandwidth

Specify rate as percentage of interface data-rate

bw

Value in percentage (Default is set to 50)

Command Mode

- /exec/configure

Chapter 25. X Commands

- xml

- xml

- xml server max-session

- xml server terminate session

- xml server timeout

- xml server validate

- xml server xml-debug

- xmlin

- xmlin

- xmlin

- xmlin

- xmlout

xml

| xml

Syntax Description

|

Pipe command output to filter

xml

output in xml format (according to .xsd definitions)

Command Mode

- /output

xml

| xml

Syntax Description

|

Pipe command output to filter

xml

output in xml format (according to .xsd definitions)

Command Mode

- /output

xml server max-session

[no] xml server max-session <number>

Syntax Description

no

(Optional) Negate a command or set its defaults

xml

xml agent

server

xml agent server

max-session

configure maximum number of xml sessions allowed

number

number of the sessions

Command Mode

- /exec/configure

xml server terminate session

xml server terminate session <session_id>

Syntax Description

xml

xml agent

server

xml agent server

terminate

command to terminate an XML session

session

terminate an XML session

session_id

sessions number

Command Mode

- /exec

xml server timeout

[no] xml server timeout <value> [ <session_id> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

xml

xml agent

server

xml agent server

timeout

configure xml agent session timeout

value

timeout in seconds

session_id

(Optional) xml agent session id

Command Mode

- /exec/configure

xml server validate

[no] xml server validate { all | <session_id> }

Syntax Description

no

(Optional) Negate a command or set its defaults

xml

xml agent

server

xml agent server

validate

command to validate an XML session

all

all sessions

session_id

session number

Command Mode

- /exec/configure

xml server xml-debug

[no] xml server xml-debug

Syntax Description

no

(Optional) Negate a command or set its defaults

xml

xml agent

server

xml server

xml-debug

xml server xml-debug

Command Mode

- /exec/configure

xmlin

xmlin

Syntax Description

xmlin

Convert CLI commands to their XML formats

Command Mode

- /exec

xmlin

xmlin

Syntax Description

xmlin

Convert CLI commands to their XML formats

Command Mode

- /exec

xmlin

| xmlin

Syntax Description

|

Pipe command output to filter

xmlin

Convert CLI show commands to their XML formats

Command Mode

- /output

xmlin

| xmlin

Syntax Description

|

Pipe command output to filter

xmlin

Convert CLI show commands to their XML formats

Command Mode

- /output

xmlout

| xmlout

Syntax Description

|

Pipe command output to filter

xmlout

output in xml format (according to the latest .xsd version)

Command Mode

- /output

Preface

This preface includes the following sections:

- Audience

- Documentation Conventions

- Documentation Feedback

- Communications, Services, and Additional Information

Audience

This publication is for network administrators who install, configure, and maintain Cisco Nexus switches.

Documentation Conventions

Command descriptions use the following conventions:

Convention

Description

bold

Bold text indicates the commands and keywords that you enter literally as shown.

Italic

Italic text indicates arguments for which the user supplies the values.

[x]

Square brackets enclose an optional element (keyword or argument).

[x | y]

Square brackets enclosing keywords or arguments separated by a vertical bar indicate an optional choice.

{x | y}

Braces enclosing keywords or arguments separated by a vertical bar indicate a required choice.

[x {y | z}]

Nested set of square brackets or braces indicate optional or required choices within optional or required elements. Braces and a vertical bar within square brackets indicate a required choice within an optional element.

variable

Indicates a variable for which you supply values, in context where italics cannot be used.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

Examples use the following conventions:

Convention

Description

screen font

Terminal sessions and information the switch displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

< >

Nonprinting characters, such as passwords, are in angle brackets.

[ ]

Default responses to system prompts are in square brackets.

!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments to . We appreciate your feedback.

Communications, Services, and Additional Information

- To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.

- To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.

- To submit a service request, visit Cisco Support.

- To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.

- To obtain general networking, training, and certification titles, visit Cisco Press.

- To find warranty information for a specific product or product family, access Cisco Warranty Finder.

Cisco Bug Search Tool

Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.