set throttling

To limit the number of Call Home messages received for the same event, use the set throttling command.

set throttling { off | on }

Syntax Description

off

Disables limiting of duplicate messages.
on

Enables limiting of duplicate messages.

Command Default

Enabled

Command Modes

Callhome (/monitoring/callhome)

Command History

Release Modification

1.0(2)

This command was introduced.

Usage Guidelines

Use this command to limit the number of Call Home messages received for the same event. If the number of messages sent exceeds a maximum limit within a preset time frame, further messages for that alert type are discarded within that time frame.

Examples

This example shows how to enable throttling of duplicate Call Home messages:

switch-A# scope monitoring
switch-A /monitoring # scope callhome
switch-A /monitoring/callhome # set throttling on
switch-A /monitoring/callhome* # commit-buffer
switch-A /monitoring/callhome #

Related Commands

Command

Description

show callhome