enable snmp

To enable SNMP services, use the enable snmp command.

enable snmp

This command has no arguments or keywords.

Command Default

SNMP services are disabled.

Command Modes

Monitoring (/monitoring)

Command History

Release Modification
1.0(1)

This command was introduced.

Usage Guidelines

Cisco recommends that you enable only the communication services that are required to interface with other network applications.

Examples

This example shows how to enable SNMP services:

switch-A#scope monitoring                                       
switch-A /monitoring # enable snmp 
switch-A /monitoring* # commit-buffer
switch-A /monitoring #

Related Commands

Command

Description

show cimxml

 

show snmp-trap