Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Release	Modification
4.1(3)N1(1)	This command was introduced.

Usage Guidelines

The show vpc role command displays the following information about the vPC status:

• Status of peer adjacency
• vPC role
• vPC MAC address
• vPC system priority
• MAC address of the device that you are working on
• System priority for the device that you are working on

This command is not available if you have not enabled the vPC feature. See the feature vpc command for information on enabling vPCs.

Examples

This example shows how to display the vPC role information of the device that you are working on:

When you reload the primary vPC peer device, the secondary vPC peer device assumes the role of the primary device. This example shows how the vPC role displays then on the new primary device:

Related Commands

Command	Description
role	Assigns a primary or secondary role to a vPC device.
show vpc brief	Displays information about vPCs. If the feature is not enabled, the system displays an error when you enter this command.
show port channel summary	Displays information about port channels.