install feature-set virtualization

To install the Cisco virtual machine feature set on the switch, use the install feature-set virtualization command. To remove the Cisco virtual machine feature set, use the no form of this command.

install feature-set virtualization

no install feature-set virtualization

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

Note The Cisco virtual machine feature is supported only on the Cisco Nexus 5500 Series switches.

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to install the Cisco virtual machine feature set on the switch:

switch# configure terminal
switch(config)# install feature-set virtualization
switch(config)#
 

Related Commands

Command
Description
feature vmfex
Enables or disables Cisco Virtual Machine Fabric Extender (VM-FEX) on the switch.
feature-set virtualization
Enables the Cisco virtual machine feature set on the switch.
show feature-set
Displays the status of the virtualization feature set.
show running-config
Displays the running system configuration information.