ip igmp snooping querier

To configure a snooping querier on an interface when you do not enable Protocol Independent Multicast (PIM) because multicast traffic does not need to be routed, use the ip igmp snooping querier command. To remove the snooping querier, use the no form of this command.

ip igmp snooping querier querier

no ip igmp snooping querier [ querier ]

Syntax Description

querier
Querier IP address.

Command Default

None

Command Modes

VLAN configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

The querier IP address cannot be a multicast address.

This command does not require a license.

Examples

This example shows how to configure a snooping querier:

switch(config)# vlan 1
switch(config-vlan)# ip igmp snooping querier 172.20.52.106
switch(config-vlan)#
 

This example shows how to disable IGMP snooping on a VLAN interface:

switch(config)# vlan 1
switch(config-vlan)# no ip igmp snooping querier
switch(config-vlan)#
 

Related Commands

Command
Description
show ip igmp snooping
Displays IGMP snooping information.