show feature-set

To display the status of all feature sets on the switch, use the show feature-set command.

show feature-set [ services feature-set-name ]

Syntax Description

services
Displays the services associated with a feature set.
feature-set-name
Name of the service or feature set.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the status of a feature set:

switch# show feature-set
Feature Set Name ID State
-------------------- -------- --------
fabricpath 2 enabled
virtualization 4 uninstalled
switch#
 

This example shows how to display the services associated with the FabricPath feature set:

switch# show feature-set services fabricpath
u2rib
drap
isis_fabricpath
3 services in feature set fabricpath
switch#
 

Related Commands

Command
Description
feature-set fabricpath
Enables the FabricPath feature set on the switch.